Related
Samsung focus only.
I suffered for long on the web trying to figure out this.This is the retail at&t rom of first windows phone release.
-First download this files
http://dl.dropbox.com/u/38849619/signed_CSC_Cetus_ATT_i917ATTJK2.csc
http://dl.dropbox.com/u/38849619/signed_eboot_Cetus_ATT.eb0
http://dl.dropbox.com/u/38849619/signed_phone_Cetus_ATT.bin
http://dl.dropbox.com/u/38849619/WP7%20Downloader%20Ver%207.41%20for%20Publish%20%20(Add%20OASIS%20Latin).zip
http://dl.dropbox.com/u/38849619/signed_pda_Cetus_ATT.nb0
-then put all in the same folder.
-now open the downloader software and load the different files by clicking phone,pda...etc and directing them to this folder.
-Also check all the boxes pda and phone....etc.
-put ur phone in download mode.
-the start button becomes clickable the click it and allow to finsh.
At the end this will install the first version of windows phone and u can now flash it to any other ROM eg
http://forum.xda-developers.com/showthread.php?goto=newpost&t=1528984
after this first flash.
AS USUAL IM NOT RESPONSIBLE AND BLAHBLAH..... FOR ANYTHING ON UR PHONE.
EXCLUSIVE WINDOWS PHONE VIDEOS COMING SOON ON MY YOUTUBE CHANNEL.
Hackarchivehub on youtube
my youtube video tutorial now available http://www.youtube.com/watch?v=m40L...DvjVQa1PpcFPsgRpt3-WqVfcLqWMb8j_uqHddhjkSR_8=
Remove magldr if u want to sell ur device
This also solve problems for those who on pressing the pwr,camera and volume down button doesnt work,and it helps remove magldr so that u can sell ur device even after installing custom roms
Will this work if you dont already have the Magldr installed?
johnwayne007 said:
Will this work if you dont already have the Magldr installed?
Click to expand...
Click to collapse
Yes It works anytime t
Flash this ROM on Samsung Omnia 7
hallo hackarchive,
i have flashed this rom samsung omnia 7. i can not go into download mode. what can i do, how i can repair my phone?
best regards
yesso
yesso said:
hallo hackarchive,
i have flashed this rom samsung omnia 7. i can not go into download mode. what can i do, how i can repair my phone?
best regards
yesso
Click to expand...
Click to collapse
sorry bro!! ur bricked cuz its focus only.I'll try to gather info to get u out of this in due time.Peace.
yesso said:
hallo hackarchive,
i have flashed this rom samsung omnia 7. i can not go into download mode. what can i do, how i can repair my phone?
best regards
yesso
Click to expand...
Click to collapse
get here and thank me too dude!!
many thanks for your efforts, i have solved the problem
for documentation:
i have solved the problem with a jig adapter. the description from your last post doesnt help me because it requires entering debug mode, but my phone couldnt go into debug mode when it haves wrong rom on it.
jig adapter is working very good. so dont be worry use jig adapter
These dosent work for me still : [Info]: USBWorkDMLI_SAM.cpp (206) ERROR :crying:
newchief said:
These dosent work for me still : [Info]: USBWorkDMLI_SAM.cpp (206) ERROR :crying:
Click to expand...
Click to collapse
i u do as i say u shouldnt get this because this rom removed the previous rom and makes the error dissapear.(that error is due to the rom on ur phone).
I just install original NODO and now its ok
I was running Yakjuxw 4.0.4(OTA comes from Samsung) on my GSM GNEX and couldn't wait for Samsung to push Jellybean anymore so I looked around and found this, it changes Yakjuxw(4.0.1, 4.0.2 and 4.0.4) to Yakju 4.0.1(OTA comes straight from Google).
Here are the steps I followed from rubiconjp's post and cleaned it up for everyone that was in my position. After the downloads, it took like less than 10min to get it on Yakju. It is super easy. No Rooting, No Custom ROMs.
Download the USB driver and firmware files to Windows.
Firmware
USB Driver
Run USB driver app in Windows, Reboot Windows
Run firmware app in Windows
Put phone in Download mode (Power off, Press Volume Down button + Power On button down until it goes to Download Mode, plug USB cable in)
Once the device is found in the firmware app, click start!
Let it finish and you are done.
When it starts back up you should setup your phone back up with all the Apps that you want before installing the OTAs. It's going to go from 4.0.2>4.0.4>4.1.1. From start to finish it took me 30-40min to get my phone back the way I want it. Good luck and enjoy.
The original carrier for my phone (Rogers) still had it on 4.0.2, so I upgraded it immediately on receipt to yakju. Used a different method (PDAnet drivers + Nexus toolkit), but yeah... getting onto yakju is one of the best things one can start off with...
Re:
ockc said:
I was running Yakjuxw 4.0.4(OTA comes from Samsung) on my GSM GNEX and couldn't wait for Samsung to push Jellybean anymore so I looked around and found this, it changes Yakjuxw(4.0.1, 4.0.2 and 4.0.4) to Yakju 4.0.1(OTA comes straight from Google).
Here are the steps I followed from rubiconjp's post and cleaned it up for everyone that was in my position. After the downloads, it took like less than 10min to get it on Yakju. It is super easy. No Rooting, No Custom ROMs.
Download the USB driver and firmware files to Windows.
Firmware
USB Driver
Run USB driver app in Windows, Reboot Windows
Run firmware app in Windows
Put phone in Download mode (Power off, Press Volume Down button + Power On button down until it goes to Download Mode, plug USB cable in)
Once the device is found in the firmware app, click start!
Let it finish and you are done.
When it starts back up you should setup your phone back up with all the Apps that you want before installing the OTAs. It's going to go from 4.0.2>4.0.4>4.1.1. From start to finish it took me 30-40min to get my phone back the way I want it. Good luck and enjoy.
Click to expand...
Click to collapse
This is awesome. I never had the time to follow through hundreds of threads to manually switch to yakju. I like you also had yakjuxw 4.0.4 through samsung OTA. I waited patiently to get it. But a casual search on google led me to this thread. It works like a charm! My Gnex is going through 4.0.4 then 4.1.1!
As stated super easy....just note that when you plug your phone in the firmware tool will recognize your phone as a binary. (0:1) something to that nature. Then just hit start in the firmware.
Thanks!
Link Is Not Working
please provide another link for firmware, the link is not working properly, i've tried for 9-10times but no success :crying:
thank you
aNewNoob said:
please provide another link for firmware, the link is not working properly, i've tried for 9-10times but no success :crying:
thank you
Click to expand...
Click to collapse
Just tested the link and is working.
Hey!
I'm fa Belgian girl, so sorry for my English!
I have a Galaxy Nexus too and I have the yakjuxw version... I'm quite a noob though! I'm afraid I'm going to crash my nexus and than kill myself for trying to do stuff I don't understand! :laugh:
So... My question is: In the step "Put phone in Download mode (Power off, Press Volume Down button + Power On button down until it goes to Download Mode, plug USB cable in)" does the phone need to be off or, I don't know... I just do it?!
Sorry for the dumb question... I'm really freaked out with this kind of stuff!
It worked for me
It worked pretty well for me. Thanks a lot for the instructions. :laugh:
Vavou_g said:
Hey!
I'm fa Belgian girl, so sorry for my English!
I have a Galaxy Nexus too and I have the yakjuxw version... I'm quite a noob though! I'm afraid I'm going to crash my nexus and than kill myself for trying to do stuff I don't understand! :laugh:
So... My question is: In the step "Put phone in Download mode (Power off, Press Volume Down button + Power On button down until it goes to Download Mode, plug USB cable in)" does the phone need to be off or, I don't know... I just do it?!
Sorry for the dumb question... I'm really freaked out with this kind of stuff!
Click to expand...
Click to collapse
regarding your question to put phone in download mode
1. just turn off your phone (like you normally do)
2. then press Volume down button and then press power on button while keep pressing the volume down button
3. keep pressing both the buttons until the phone starts and goes into Download Mode
4. then plug usb cable
press thanks if i helped you
awesome thread, should be stickied!
those hu have problem downloading from rapidshare
those hu have problem downloading from rapidshare USe this rapidshare premium link generator : rapid8.com; worked for me, might work for you. Cheers )
finally able to download nd now on 4.1.1 :beer:
may be it is the easiest way to get yakju on Nexus, u made my life easy
Thank You :thumbup:
Sent from my Galaxy Nexus using xda app-developers app
ockc said:
I was running Yakjuxw 4.0.4(OTA comes from Samsung) on my GSM GNEX and couldn't wait for Samsung to push Jellybean anymore so I looked around and found this, it changes Yakjuxw(4.0.1, 4.0.2 and 4.0.4) to Yakju 4.0.1(OTA comes straight from Google).
Here are the steps I followed from rubiconjp's post and cleaned it up for everyone that was in my position. After the downloads, it took like less than 10min to get it on Yakju. It is super easy. No Rooting, No Custom ROMs.
Download the USB driver and firmware files to Windows.
Firmware
USB Driver
Run USB driver app in Windows, Reboot Windows
Run firmware app in Windows
Put phone in Download mode (Power off, Press Volume Down button + Power On button down until it goes to Download Mode, plug USB cable in)
Once the device is found in the firmware app, click start!
Let it finish and you are done.
When it starts back up you should setup your phone back up with all the Apps that you want before installing the OTAs. It's going to go from 4.0.2>4.0.4>4.1.1. From start to finish it took me 30-40min to get my phone back the way I want it. Good luck and enjoy.
Click to expand...
Click to collapse
Nice thank you. Im gonna go home and try this!!
But i cant stop thinking if this will have an impact on my signal strenght or somthing else? There must be a difference in these to builds, since they have made them.
Im living in Denmark and i wonder if yakjuxw is better for something in denmark (maybe the antenna setup or something?)
I can always flash back if it doesnt work that good. ill update this post after flash to yakju
PS: The file from rapid share takes ages to download :-/
UPDATE: Works like a charm!! Thank you! No problems detected yet
I have an different question that I couldn't find answer for it. How can one flash the stock firmware (I mean nonyakju). Every guide mentions how to revert to stock using official images (yakju). Before flashing yakju image, can I make some backup image of the current nonyakju rom. Thanks for advice.
The driver was not working for me, so after some serching on xda i found newer driver SAMSUNG_USB_Driver_for_Mobile_Phones_1_5_6_0 and then everything was peachy
This is the driver i used.
http://forum.xda-developers.com/showthread.php?t=961956
I have Rogers version Galaxy Nexus 4.0.2 and I have never had OTA to 4.0.4. Now, I am using this method and I updated to from 4.0.1 -> 4.0.2 -> 4.0.4 -> 4.1.1 OTA. Happy now.
Does anybody have a mirror for the firmware? Rapidshare is really slow.
can't believe this isn't stickied yet!
hi this might be a stupid question but how do i "Run firmware app in Windows"???
ive only got .img files after extracting and i cant mount it using daemon tools, im sure sure how to run it
thanks
My Galaxy Nexus is YAKJUJP and not found in firmware app
Once the device is found in the firmware app, click start!
My Galaxy Nexus is YAKJUJP and not found in firmware when in Download mode
any one help this is not working for at all . my bootloader is locked.
i have installed samsung USB drivers
i am following all steps from 2 hours but not work please help
ockc said:
I was running Yakjuxw 4.0.4(OTA comes from Samsung) on my GSM GNEX and couldn't wait for Samsung to push Jellybean anymore so I looked around and found this, it changes Yakjuxw(4.0.1, 4.0.2 and 4.0.4) to Yakju 4.0.1(OTA comes straight from Google).
Here are the steps I followed from rubiconjp's post and cleaned it up for everyone that was in my position. After the downloads, it took like less than 10min to get it on Yakju. It is super easy. No Rooting, No Custom ROMs.
Download the USB driver and firmware files to Windows.
Firmware
USB Driver
Run USB driver app in Windows, Reboot Windows
Run firmware app in Windows
Put phone in Download mode (Power off, Press Volume Down button + Power On button down until it goes to Download Mode, plug USB cable in)
Once the device is found in the firmware app, click start!
Let it finish and you are done.
When it starts back up you should setup your phone back up with all the Apps that you want before installing the OTAs. It's going to go from 4.0.2>4.0.4>4.1.1. From start to finish it took me 30-40min to get my phone back the way I want it. Good luck and enjoy.
Click to expand...
Click to collapse
mtk667 said:
Once the device is found in the firmware app, click start!
My Galaxy Nexus is YAKJUJP and not found in firmware when in Download mode
any one help this is not working for at all . my bootloader is locked.
i have installed samsung USB drivers
i am following all steps from 2 hours but not work please help
Click to expand...
Click to collapse
Don't use shortcuts like this. Use this.
Hi All,
I explain my problem, this is a day I look in vain.
Yesterday trying to Flash the ClockworkMod Recovery on my LG, I got an error "secure booting error" and no way out of.
So I tried some manipulation '(turn off, tweak in the keys, also in vain)
So I learned about the net and I could see that we could inject a new rom thanks to KDZ FW upd.exe program and a stock rom (via the phone in download mode)
Once the download mode enabled, I run the program, I choose "cs_emergency" and "3gqct" and my stock rom.
Once "Launch software udapte" launched, the program stop to work ! No way, it also looks like the software does not recognize my phone (while Windows yes, when I plug it, a small sound, and notification in the status bar "ready device has to be used")
I am despairing, I was told that as I had the Download mode, there was something to do.
Thank you to you for your future help!
Regards
KLLK said:
Hi All,
I explain my problem, this is a day I look in vain.
Yesterday trying to Flash the ClockworkMod Recovery on my LG, I got an error "secure booting error" and no way out of.
So I tried some manipulation '(turn off, tweak in the keys, also in vain)
So I learned about the net and I could see that we could inject a new rom thanks to KDZ FW upd.exe program and a stock rom (via the phone in download mode)
Once the download mode enabled, I run the program, I choose "cs_emergency" and "3gqct" and my stock rom.
Once "Launch software udapte" launched, the program stop to work ! No way, it also looks like the software does not recognize my phone (while Windows yes, when I plug it, a small sound, and notification in the status bar "ready device has to be used")
I am despairing, I was told that as I had the Download mode, there was something to do.
Thank you to you for your future help!
Regards
Click to expand...
Click to collapse
If you can still power download mode all is not lost.
Follow THIS or THIS tutorial... also you may try LG's tool (emergency firmware recovery).
Also consider THIS FAQ for other questions. Hope you'll be able to solve your problem.
roscatel said:
If you can still power download mode all is not lost.
Follow THIS or THIS tutorial... also you may try LG's tool (emergency firmware recovery).
Also consider THIS FAQ for other questions. Hope you'll be able to solve your problem.
Click to expand...
Click to collapse
Thanks a lot for the reply !
I tried to inject the Stock rom with the LG support mobile Tools. (Recovery update) and the update was fine but when i restart my phone at the end of the process, same issue. Download mode and nothing else...
I already tried to use KDZ and the program doesnt want to work ... Same issue with LG PC Suite, The program doesn't recognize my phone when i plug it on the computer.
Anyone know what's the manipulation to exit out the download mode ?
Thanks
KLLK said:
Thanks a lot for the reply !
I tried to inject the Stock rom with the LG support mobile Tools. (Recovery update) and the update was fine but when i restart my phone at the end of the process, same issue. Download mode and nothing else...
I already tried to use KDZ and the program doesnt want to work ... Same issue with LG PC Suite, The program doesn't recognize my phone when i plug it on the computer.
Anyone know what's the manipulation to exit out the download mode ?
Thanks
Click to expand...
Click to collapse
This is really wierd. Was your phone rooted and (bootloader) unlocked? Seems like your SBLs are messed up..
roscatel said:
This is really wierd. Was your phone rooted and (bootloader) unlocked? Seems like your SBLs are messed up..
Click to expand...
Click to collapse
My phone was rooted but i don't think that the boatloader was unlocked... I will try to launch KDZ once again.
Problem Solved !
You have to wait many time when you clic to the "Launch" button on KDZ (approximatively 1h for me !)
You think that the program doesn't work but it work !
Thanks a lot
PS : Now i want to put the Pacman rom on my LGOG, i used ROM MANAGER to install the CWM recovery but doesnt Work... Any idea ?
For information :
LGOG French E975
E97510D - EUR - XX
Root and unlock first?maybe?dunno..
Sent from Asylum via LG E975/smart phones,dumb people.
My phone Is already rooted. How can i unlock ? Freegee ? With my french phone ?
KLLK said:
Hi All,
I explain my problem, this is a day I look in vain.
Yesterday trying to Flash the ClockworkMod Recovery on my LG, I got an error "secure booting error" and no way out of.
So I tried some manipulation '(turn off, tweak in the keys, also in vain)
So I learned about the net and I could see that we could inject a new rom thanks to KDZ FW upd.exe program and a stock rom (via the phone in download mode)
Once the download mode enabled, I run the program, I choose "cs_emergency" and "3gqct" and my stock rom.
Once "Launch software udapte" launched, the program stop to work ! No way, it also looks like the software does not recognize my phone (while Windows yes, when I plug it, a small sound, and notification in the status bar "ready device has to be used")
I am despairing, I was told that as I had the Download mode, there was something to do.
Thank you to you for your future help!
Regards
Click to expand...
Click to collapse
I too.help
Read the entire topic. My problem Is solved
I tried to install a custom rom from here : http://forum.xda-developers.com/opt.../vupmp-g-pro-sg3-v3-0-final-lg-g-pro-t2867783
But now I am stuck in a boot loop i think ( it won't do anything but showing me the lg sign )
I tried downloading the kdz file but there isn't 1 site for the Dutch one @ NLD/Netherlands (tbh there is but all the links are down)
I can't boot into the cwm either and I also can't do hard reset...
Can anyone tell me what to do?
Having the same issue
someone please help
The answer
Ericrsmssn said:
Having the same issue
someone please help
Click to expand...
Click to collapse
I found a sollution for this.
Download LG Mobile Support tool ( http://lg-support-tool.en.lo4d.com/ )
Put your phone in download mode "Hold the VolumeUP + VolumeDOWN Button and plug in the usb cable from your device to your pc [DON'T PRESS THE POWER BUTTON], let it install the drivers. ( To be sure it found you'r drivers, you should press on : Install Drivers
Once you installed your driver of the e98x ( mine is e986 ) Press on Extra functions - Upgrade-error recovery.
Make sure it found your device and make sure you are connected to the internet "IT WONT WORK WITHOUT INTERNET CONNECTION"
Launch it and it will reset your phone to new ( it did for me )
Don't get mad if you lose you're data T_T this worked for me so it should work for you to
bagslayer said:
I found a sollution for this.
Download LG Mobile Support tool ( http://lg-support-tool.en.lo4d.com/ )
Put your phone in download mode "Hold the VolumeUP + VolumeDOWN Button and plug in the usb cable from your device to your pc [DON'T PRESS THE POWER BUTTON], let it install the drivers. ( To be sure it found you'r drivers, you should press on : Install Drivers
Once you installed your driver of the e98x ( mine is e986 ) Press on Extra functions - Upgrade-error recovery.
Make sure it found your device and make sure you are connected to the internet "IT WONT WORK WITHOUT INTERNET CONNECTION"
Launch it and it will reset your phone to new ( it did for me )
Don't get mad if you lose you're data T_T this worked for me so it should work for you to
Click to expand...
Click to collapse
Nope, aint working since it says that my battery isn't fully charged. but i even tried the battery of a friend of mine and it says the same..
are you able to enter into the recovery by pressing pOWER + VOLUME UP ? the device must be turned off and to be sure, pull battery and charging cable off and put battery back to do the pressing combo.
bagslayer said:
I found a sollution for this.
Download LG Mobile Support tool ( http://lg-support-tool.en.lo4d.com/ )
Put your phone in download mode "Hold the VolumeUP + VolumeDOWN Button and plug in the usb cable from your device to your pc [DON'T PRESS THE POWER BUTTON], let it install the drivers. ( To be sure it found you'r drivers, you should press on : Install Drivers
Once you installed your driver of the e98x ( mine is e986 ) Press on Extra functions - Upgrade-error recovery.
Make sure it found your device and make sure you are connected to the internet "IT WONT WORK WITHOUT INTERNET CONNECTION"
Launch it and it will reset your phone to new ( it did for me )
Don't get mad if you lose you're data T_T this worked for me so it should work for you to
Click to expand...
Click to collapse
fosunite said:
are you able to enter into the recovery by pressing pOWER + VOLUME UP ? the device must be turned off and to be sure, pull battery and charging cable off and put battery back to do the pressing combo.
Click to expand...
Click to collapse
I did that.. but no luck :S I am able to get into recovery mode but it keeps saying my battery is to empty
bagslayer said:
I tried to install a custom rom from here : http://forum.xda-developers.com/opt.../vupmp-g-pro-sg3-v3-0-final-lg-g-pro-t2867783
But now I am stuck in a boot loop i think ( it won't do anything but showing me the lg sign )
I tried downloading the kdz file but there isn't 1 site for the Dutch one @ NLD/Netherlands (tbh there is but all the links are down)
I can't boot into the cwm either and I also can't do hard reset...
Can anyone tell me what to do?
Click to expand...
Click to collapse
you told that u cannot boot into cwm which sounds pretty serious...
bagslayer said:
I did that.. but no luck :S I am able to get into recovery mode but it keeps saying my battery is to empty
Click to expand...
Click to collapse
how do you get into the recovery mode?
please do not mistake cwm and recovery mode, because cwm is your recovery mode.
so please tell what steps you were using so that we can help you
Sent from my LG-E980 using XDA Free mobile app
well, I tried powering off the phone----holding volume DOWN+UP and plugging the usb into my lg.
I also tried that while I took out my entire battery but the same results
Ehm guys, I would like to know how to get my phone back to the stock image. I am still stuck on the error which says my battery is empty when I try to restore it but I quess it is because my phone thinks it is en E980 while it is an e986
Or it is because I flashed Madmacks kernel or smthing. Any solutions? :C I just wanna go back to the stock image D:
bagslayer said:
Ehm guys, I would like to know how to get my phone back to the stock image. I am still stuck on the error which says my battery is empty when I try to restore it but I quess it is because my phone thinks it is en E980 while it is an e986
Or it is because I flashed Madmacks kernel or smthing. Any solutions? :C I just wanna go back to the stock image D:
Click to expand...
Click to collapse
1. connect ur phn to ur pc and install flashtool from step 4.
2.install drivers of ur mbl
3.download the kdz firmware file u want from here http://www.lg-phone-firmware.com/index.php?id_mod=25
4.now follow the steps provided in the thread http://forum.xda-developers.com/show....php?t=2797190
5.its better to choose cse flash as i did that(when i chosen normal flash,the update stopped saying some error.so disconneted my net connection and tried again.it worked)
6.if u follow the above steps correctly,ull get ur phn back within 6 minutes.
(sorry for my english) and please let me know if ur phn is back.
hope this will help..
krishna13 said:
1. connect ur phn to ur pc and install flashtool from step 4.
2.install drivers of ur mbl
3.download the kdz firmware file u want from here http://www.lg-phone-firmware.com/index.php?id_mod=25
4.now follow the steps provided in the thread http://forum.xda-developers.com/show....php?t=2797190
5.its better to choose cse flash as i did that(when i chosen normal flash,the update stopped saying some error.so disconneted my net connection and tried again.it worked)
6.if u follow the above steps correctly,ull get ur phn back within 6 minutes.
(sorry for my english) and please let me know if ur phn is back.
hope this will help..
Click to expand...
Click to collapse
The link of Part 4 isn't working :C
could you upload a new link?
RTS on GPro
XDA already has a nice thread for doing a Return to Stock that I have used more than once and has worked every time.
http://forum.xda-developers.com/showthread.php?t=2302660
geekboy01 said:
XDA already has a nice thread for doing a Return to Stock that I have used more than once and has worked every time.
http://forum.xda-developers.com/showthread.php?t=2302660
Click to expand...
Click to collapse
that is for the E980, will it work for the E986 to?
bagslayer said:
that is for the E980, will it work for the E986 to?
Click to expand...
Click to collapse
Unfortunately I don't have the 986 and didn't catch that was your specific model. If you're in a bricked mode already and have access to your original FW then its worth a shot for recovery. YMMV
geekboy01 said:
XDA already has a nice thread for doing a Return to Stock that I have used more than once and has worked every time.
http://forum.xda-developers.com/showthread.php?t=2302660
Click to expand...
Click to collapse
geekboy01 said:
Unfortunately I don't have the 986 and didn't catch that was your specific model. If you're in a bricked mode already and have access to your original FW then its worth a shot for recovery. YMMV
Click to expand...
Click to collapse
Mine is not bricked yet D: I'm scared ;-;
bagslayer said:
The link of Part 4 isn't working :C
could you upload a new link?
Click to expand...
Click to collapse
so sorry for my late rply.
regarding instructions of step 4 follow this link. http://forum.xda-developers.com/showthread.php?t=2432476
but dwnld the kdz for ur lg g pro.
that guide on the link these guys have provided above should work for all the G Pro variants, just download the kdz file for your specific model. try this link http://www.lg-phone-firmware.com/index.php
be patient and have time reading, everything you need is on this forum
---------- Post added at 05:10 PM ---------- Previous post was at 04:59 PM ----------
also try this http://forum.xda-developers.com/showthread.php?t=2420219
follow the first guide "KDZ Flashing Method"
make sure you have your internet connection disabled when you start LG Flash Tool and that you are using Windows 7, i dont know if it will work on windows 8, but im sure it wont work on winXP.
Hi all, I come to you as my last resort.
I have spent hours on google trying to find a solution to my problem.
This is what happened.
I store my ROMS on an external SD and sometimes i get the error that it is being removed unexpectedly...sometimes..anyway.
I booted into my TWRP and went to flash DarkKnights ROM..this ROM was something like 1.7 GB i think and after completely wiping the device (System, data and cache) i proceeded to flash the new rom..However it flashed very very quickly which i found strange but proceeded to restarting my device.
After that my phone has been completely dead!
What i think happened is that the EXTERNAL SD malfunctioned during the installation and im left with absolutely nothing on my phone.
I cannot enter recovery or download mode!
The only sign of life is when i plug it into my computer and it installs a driver that is the androidnet driver not the qualcom driver that some people have had and fixed.
I am open to any suggestions as you truly are my last resort.
Haven't really got much to say in the way of helping you mate, sounds like you're in a real Pickle :/
I'm sure someone here has a solution, there'd surely be SOME way to resolve it, we've got some pretty talented devs that do some amazing stuff so someone should be able to help ya somewhere.
All the best man, if you need help we're here
Look at here : http://forum.xda-developers.com/sprint-lg-g3/help/bricked-ls990-access-recovery-download-t3053985/post60106965#post60106965
try fastboot mode.
For that install this : http://forum.xda-developers.com/showthread.php?t=2588979&nocache=1
after you can apply fastboot commands
If you want to find custom recovery, flash kitkat aboot, kitkat laf and twrp recovery
you can have all this files in this post : http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767/post59895642#post59895642
Download the script and extract it. In the folder there are all files (aboot, laf and recovery)
But of course , the fastboot command has to work ...
After that you should find recovery and download mode
Fastboot doesnt work for D855...
You can try flashing the TOT file with the old LG Flash Tool but im doubtful it will work
Are you sure you have no recovery access by Power+Vol—
jac10000 said:
Look at here : http://forum.xda-developers.com/sprint-lg-g3/help/bricked-ls990-access-recovery-download-t3053985/post60106965#post60106965
try fastboot mode.
For that install this : http://forum.xda-developers.com/showthread.php?t=2588979&nocache=1
after you can apply fastboot commands
If you want to find custom recovery, flash kitkat aboot, kitkat laf and twrp recovery
you can have all this files in this post : http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767/post59895642#post59895642
Download the script and extract it. In the folder there are all files (aboot, laf and recovery)
But of course , the fastboot command has to work ...
After that you should find recovery and download mode
Click to expand...
Click to collapse
I will try as soon as possible and let you know if anything happens!
itsbighead said:
Fastboot doesnt work for D855...
You can try flashing the TOT file with the old LG Flash Tool but im doubtful it will work
Click to expand...
Click to collapse
I will keep that in mind as well thank you!
jac10000 said:
Are you sure you have no recovery access by Power+Vol—
Click to expand...
Click to collapse
Yes im sure! my phone is completely dead and the only sign of life as i said is when the driver gets installed on the computer when i plug it in.. Thank you for your reply though.
Try LG mobile support tool (old version) : http://tool.xcdn.gdms.lge.com/client/app/B2CAppSetup.exe
Even if you have not download mode, you can try. Install the tool
Try to boot on download mode, you have error message
run LG mobile support tool
choose Additional functions then Upgrade of the recovery after error
At one moment the tool will say that there is not of g3 connected, reattempts starting in download mode or presses on the button to power. Try several times both.
If it work, the software is going to download the last one kdz available for your device and him(it) to fall in love by following
You can always try this solution, with a little luck ...
I have tried all your suggestions but i still have no luck..i tried the tot method as well and it comes up with an error message of 'download fails'..there must be some way to fix this!!im left with the driver AndroidNet being installed on the computer and a phone that cannot enter recovery or download mode. however i can hear the phone working on the inside if i listen closely..if you have any other suggestions please share!
Update:
I was playing around with the phone and when i plugged it into the computer the screen came on and showed me battery low..also the led light on top started flashing red as it does when the phone's battery is low..I dont know if this will help in finding a fix but im hopeful.. :/
HELP
PeterGeorgiou said:
Update:
I was playing around with the phone and when i plugged it into the computer the screen came on and showed me battery low..also the led light on top started flashing red as it does when the phone's battery is low..I dont know if this will help in finding a fix but im hopeful.. :/
Click to expand...
Click to collapse
What had you done to wake up the screen and led light.. plz let me know.. because i have the same situation like you before rite now.. Please i need your help ! thank you
li545044579 said:
What had you done to wake up the screen and led light.. plz let me know.. because i have the same situation like you before rite now.. Please i need your help ! thank you
Click to expand...
Click to collapse
Hello my friend..All i did was plug the wire into the computer and then into my phone..and because my battery was very low the screen turned on and showed me the battery low screen..then the led started flashing..and finally the phone switched off completely..Thankfully i have another battery to continue my testing and trying to fix it..but apart from that that happened with the battery im back to square one where my phone is completely dead again and the only response i get is the AndroidNet USB driver being installed on the computer.
PeterGeorgiou said:
Hi all, I come to you as my last resort.
I have spent hours on google trying to find a solution to my problem.
This is what happened.
I store my ROMS on an external SD and sometimes i get the error that it is being removed unexpectedly...sometimes..anyway.
I booted into my TWRP and went to flash DarkKnights ROM..this ROM was something like 1.7 GB i think and after completely wiping the device (System, data and cache) i proceeded to flash the new rom..However it flashed very very quickly which i found strange but proceeded to restarting my device.
After that my phone has been completely dead!
What i think happened is that the EXTERNAL SD malfunctioned during the installation and im left with absolutely nothing on my phone.
I cannot enter recovery or download mode!
The only sign of life is when i plug it into my computer and it installs a driver that is the androidnet driver not the qualcom driver that some people have had and fixed.
I am open to any suggestions as you truly are my last resort.
Click to expand...
Click to collapse
You could try this method :- http://forum.xda-developers.com/showthread.php?t=2831668
Make sure your Battery is charged and hope and pray your Phone will have USB Debugging enabled.
Good luck and tell us how you progress, if at all.....:fingers-crossed:....
Same Problem
PeterGeorgiou said:
Hello my friend..All i did was plug the wire into the computer and then into my phone..and because my battery was very low the screen turned on and showed me the battery low screen..then the led started flashing..and finally the phone switched off completely..Thankfully i have another battery to continue my testing and trying to fix it..but apart from that that happened with the battery im back to square one where my phone is completely dead again and the only response i get is the AndroidNet USB driver being installed on the computer.
Click to expand...
Click to collapse
Hi friend, yeah, that was low battery screen pop out. Doesn't help after you charge you phone. And also, i getting theLGE AndroidNet USB driver just like you. i still keep searching up for solution. Hope it can fix it as soon as possible. I am so thankful for your suggestion. Thank you
573v3 said:
You could try this method :- http://forum.xda-developers.com/showthread.php?t=2831668
Make sure your Battery is charged and hope and pray your Phone will have USB Debugging enabled.
Good luck and tell us how you progress, if at all.....:fingers-crossed:....
Click to expand...
Click to collapse
thank you for your post but the link is dead..also my phone cannot be recognized in order to use fasttboot. :/
HI, friend, have you find any solution yet.. ? i tried, but still cant fine one. Hope people can upload a solution to solve that.
li545044579 said:
HI, friend, have you find any solution yet.. ? i tried, but still cant fine one. Hope people can upload a solution to solve that.
Click to expand...
Click to collapse
Nothing yet..im still searching and trying every possible method there is but no luck
PeterGeorgiou said:
Nothing yet..im still searching and trying every possible method there is but no luck
Click to expand...
Click to collapse
You can explore this solution : http://forum.xda-developers.com/showthread.php?t=2582142
It's for the G2 but can be adaptable for G3 ...
jac10000 said:
You can explore this solution : http://forum.xda-developers.com/showthread.php?t=2582142
It's for the G2 but can be adaptable for G3 ...
Click to expand...
Click to collapse
Don't get it with >>>>Open terminal in ubuntu then type: do i open terminal in computer or in the phone. If open in the phone, its impossible because the problem we had right now is when we connect the phone with PC, the only thing show up on computer is LGE AndroidNet USB Serial Port. but our phone screen still off even the system is boot in.
jac10000 said:
You can explore this solution : http://forum.xda-developers.com/showthread.php?t=2582142
It's for the G2 but can be adaptable for G3 ...
Click to expand...
Click to collapse
Thank you very much for the thread you posted..i tried it but the thing is..my phone has literally nothing on it so when i put each file manually into the phone i dont know which sdb to put it through to..as the thread says it should give a lost of all the system partition files but since my one doesnt have anything on the phone it does not find them...
However, i did manage to establish a connection between the phone and the terminal in linux so im thinking maybe i have to flash each file manually that i can get from a system dump of a g3 and maybe thay will work..what do you think??
PeterGeorgiou said:
Thank you very much for the thread you posted..i tried it but the thing is..my phone has literally nothing on it so when i put each file manually into the phone i dont know which sdb to put it through to..as the thread says it should give a lost of all the system partition files but since my one doesnt have anything on the phone it does not find them...
However, i did manage to establish a connection between the phone and the terminal in linux so im thinking maybe i have to flash each file manually that i can get from a system dump of a g3 and maybe thay will work..what do you think??
Click to expand...
Click to collapse
Here the same method on Windows : http://forum.xda-developers.com/lg-g2/general/choise-unbrick-qhsusbbulk-qualcomm-9006-t3093844
Yes if you can establish a connection between the phone with the Terminal (linux) or AOMEI Partition Assistant (windows) , you can flash the partitions (aboot, boot, laf) to have after download mode and then apply a kdz
other method ... http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
and can be ... : http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404