Related
Hello members,
My diamond screen is often showing black and white screen. It is simply hanging. Each time I had to remove the battery and restart it again.
I am using MIN.74 ROM.
Please let me know what is wrong and suggest me a solution.
Please find the enclosed copy.
Thank you in advance.
Best Regards,
So
sonyuk143 said:
Hello members,
My diamond screen is often showing black and white screen. It is simply hanging. Each time I had to remove the battery and restart it again.
I am using MIN.74 ROM.
Please let me know what is wrong and suggest me a solution.
Please find the enclosed copy.
Thank you in advance.
Best Regards,
So
Click to expand...
Click to collapse
did you formated the device before flashing ? task29 .. mtty ?
this i had few times after much flashing. but few times meaning 2-3 after MAAAANY flashing .. but if it is often .. probably some leftovers from previous rom ?
it is not a screen problem!
cheers
Even i have this now for the past 2-3 weeks, i thought my diamond was dying
Lets see what happens im gonna backup my phone and try formating it today.
It also happens to me sometimes... But I don't restart the phone... I wait some minutes that the device go into sleep mode and after that the screen is normal again.
It happens very rarely and I don't know what's the cause...
I always flash the device using mtty.
Bye
Marshall
yes it started also on mine, today i had to reboot it twice because of this problem.
I'm using last memo rom with sense 2016.
i never had that problem until now, and i flashed like hundred times almost every rom here, always with mtty.
i have faced that problem too! it's not a big deal for my phone. try to flash other ROM to your Device.i'm using Memo too! and i love it.
maybe it's because a bad ROM flash. try to flash it with other ROM and flash again with your current ROM and try to flasy using mmty.
I have a same issue and I thought that my device is gonna die
I'm using Rottgrub's rom and I alwasy do mtty before flashing rom
I am having the same problem, since the past few weeks. I have flashed the device say 100 times. I've tried different ROMs and the problem recurrs. I do a soft rest and everything returns to normal.
One observation is that when I do task 29. I get I get atleast 5 'ERASE block xxx FAIL' messages. I hope someone can help in this regard.
When I using GenY 2.6 with Sense, I also got this problem. But I change to 6.5 with titanium, the problem gone. I think the reason is sense, or maybe run too much 3D with Sense.
And of course, I don't think It's a hardware issue.
@sobny:
Yeah- it only happens when I use Sense Rom
as far as i heard, is just "overflashing" .. and NOT known solution for "snow like screen" ..
and it is NOT sense related, as few times i turned OFF sense, and used SPB mobile shell ..
FyreMasq said:
One observation is that when I do task 29. I get I get atleast 5 'ERASE block xxx FAIL' messages. I hope someone can help in this regard.
Click to expand...
Click to collapse
basicly that is flash error, i mean .. blocks in phone, like bad sectors on hard drive, but in the great mtty guide .. it says
ERASE block xxx FAIL !!!
ERASE block xxx FAIL !!!"
(where x is a random number)
This has been asked 100+ times in this thread so this is the final time I will answer:
IT MEANS NOTHING..NADA..ZIP! I have not experienced ANY problem with this output...Please stop asking!
Click to expand...
Click to collapse
I have a screen freezing after unlock or call problem for months, tried differnt things like changing ROMs, lockscreen apps but none of them worked, my screen was still unresponsive for a while after unlocking screen, then i saw senaia's post about TP Calibration and tried, the problem is gone so i wrote this tutorial to help the others.
I take no responsibility for any DAMAGES or BRICKED phone, do it at your own risk
WARNING: This will ERASE all of your data, applications, sd card, messages, contacts etc. so make backups of them.
Here is step by step guide
DONT FORGET TO BACKUP
1. Make a goldcard using tutorial in this thread
2. Unrar attached file to the root of Goldcard
3. Power off phone, boot to bootloader with volume down and power button pressed
4. Wait for while it will search for files
5. Then a screen will show up like
Power => Reflash
Vol-Dn => DIAG
6. Press Volume Down for Diag
7. You will see a screen asking you to put phone on a flat surface, do what it says
8. Once that is done you will see a menu about Clear S58 Data, Ignore it, pull the battery and reboot
9. Repair is done, problem should be solved now
This is my first tutorial for XDA, so any suggestions are welcome
Thanks to senaia, he showed how to do
IT works, finally!
I can confirm that the tutorial made by mstfkaratas is working.
Thank you, I cannot describe how much i appreciate it, my beer money is on it's way!
thanks for beer
nevermind
It seems like i got a bit too emotional on this, and my previous post was a little rushed.
The screen freezing gradually comes back in 24 hours. The waiting times become longer and longer. After i did the above steps the lag was gone, but unfortunately it comes back. Especially after i set up to sync with my google account. I also tries to make a new accont, but without success.
I had this issue but admittedly it had just about disappeared when I upgraded to 2.3.5, but still had the odd freeze when receiving a call but not as bad, I did this tutorial and have not had 1 freeze since, may I suggest your problem is hardware (digitizer) Ivaxona?
hi ivaxona your problem can be hardware related or an app you installed, i can suggest you install apps one by one and check the problem
i cant help you more than this because i am not an expert this solution helped more than 5 phones AFAIK
Sent from HTC WFS
Hi, thanks for the response, i also thought that it may be a touchscreen problem, but it got me thinking, that how could be this possible, when after a short time it start to work absolutely perfect.
I also tried to create a new google account just for testing so the possibility of a 3rd party application causing the problem is eliminated.
I have to mention though that after i place the first call the performance response time degrades significantly. That's why i think that it could be a radio problem as well.
I have to admit that i just recently purchased this digitizer on ebay, and it looked like a second hand unit so i might jut got screwed up.
As a last try before i try to change the digitizer once again, i'll try to upgrade to 2.3.5 as it was suggested.
I'm still on a stock ROM, i suppose there is no 2.3.5 official ROM so i'll have too ROOT the phone, right?
once again thanks for your help!
http://www.filefactory.com/file/c0a...5.3035H_7.53.39.03M_release_225747_signed.exe
this is 2.3.5 EU RUU from shipped roms thread, you can try this, if this doesnt work, there should be tutorials for how to install in this forum. i hope this helps
edit: here is a thread about upgrading 2.3.5 http://forum.xda-developers.com/showthread.php?t=1363693
Thank you very much, got my brothers device to work now
after i upgraded to 2.3.5 the fix is working! Thanks a lot!
Solved!!
Many many thanks!
Ciao.
Thanks brother
thanks brother..!!!
After many months of searching for solution, it is finally fixed.
It's a relief it's not a hardware issue. I am using custom 2.3.5 and it worked.
Thanks.
thanks brother, you saved my cel phone, I wonder which phones this works ???? I tried it with my wildfire s and is worked
nathatheboss said:
thanks brother, you saved my cel phone, I wonder which phones this works ???? I tried it with my wildfire s and is worked
Click to expand...
Click to collapse
the diag file used for this process is only compatible with wildfire s, i dont know if other phones have that kind of diag files
Sent from my HTC Wildfire S
Thanks for your how-to...
Sadly it didn't help for me, although I've successfully performed the DIAG boot on my S-OFF WFS. I'm running the latest version of alquez's Cyanogenmod 7.2.0-RC1-marvel-KANG (03-24).
I'm also not sure if I have the problem that is described in this thread.
Whenever I power on the phone and try the unlock-slide the first time, the slider jumps back after some pixels. Everytime, it's really nasty.
Maybe this is something else and I should start a new thead for it?
Thanks!! This really works!!! I had replaced the screen, but it only worked the left side. After applying your method, this little wilfire s works!!! My girlfriend will be very happy!!!
Thanks for the tut.
Sorry, i still have this proble in my phone, one question.
To do this tutorial, we must be S-OFF?
Thx
no need to be s-off, i have positive feedbacks with s-on devices
Sent from my Wildfire S using Tapatalk 2
I need an opinion on this one. I've looked for this problem but it seems not to be clear what is causing it. I have Wildfire S (EU) Marvel. The device is S-On but I unlocked the boot loader and installed CWM. I've already tried several ROMs but it doesn't help to solve the issue. The problem appears during making the call - the screen goes black when you put the phone next to head and after that doesn't want to wake up. The only thing that wakes it up is putting it next to strong light source so I think the light sensor is the one to blame. However automatic backlight seems to be working fine. I really hope that it is not hardware problem. Please give any suggestion to try solving this problem. I would even go for the option to shut down somehow the light sensor because restarting phone after each call is kind of annoying. Thank you in advance for any help you can provide. Sorry for such a long introduction.
anubius said:
I need an opinion on this one. I've looked for this problem but it seems not to be clear what is causing it. I have Wildfire S (EU) Marvel. The device is S-On but I unlocked the boot loader and installed CWM. I've already tried several ROMs but it doesn't help to solve the issue. The problem appears during making the call - the screen goes black when you put the phone next to head and after that doesn't want to wake up. The only thing that wakes it up is putting it next to strong light source so I think the light sensor is the one to blame. However automatic backlight seems to be working fine. I really hope that it is not hardware problem. Please give any suggestion to try solving this problem. I would even go for the option to shut down somehow the light sensor because restarting phone after each call is kind of annoying. Thank you in advance for any help you can provide. Sorry for such a long introduction.
Click to expand...
Click to collapse
long introduction is far better than a short one ...
did you install rom propperly (factory reset/cache clean/dalvik clean)?
did you try using any other dialer app just to check ?
Like this, or this
I think i have read about such problem somewhere, if i find it i will post you the link to it...
also here are some apps to check your proximity sensor :
ProxyLightTester i couldn't find it on market. (not tested)
Proximity Sensor Finder Market link. (tested) and it will report 'all or nothing'
b02 said:
long introduction is far better than a short one ...
did you install rom propperly (factory reset/cache clean/dalvik clean)?
did you try using any other dialer app just to check ?
Like this, or this
I think i have read about such problem somewhere, if i find it i will post you the link to it...
also here are some apps to check your proximity sensor :
ProxyLightTester i couldn't find it on market. (not tested)
Proximity Sensor Finder Market link. (tested) and it will report 'all or nothing'
Click to expand...
Click to collapse
Hi, Thanks a lot for suggestions. So it seems to me that proximity and light sensors work. I tried several software including the one you suggested and the proximity and light sensor respond ok. I also tried different dialer but it doesn't help. I have no idea what can it be. I am thinking to put the device back to the factory state and maybe install official ROM but I am not sure if this will solve the problem. Thank you again for helping. And your device never had this problem?
Never had that problem.. Try reflashing w/o any app2sd gapps and stuff, just clean new rom and try it..
Sent from my HTC Wildfire using xda premium
anubius said:
I am thinking to put the device back to the factory state and maybe install official ROM but I am not sure if this will solve the problem.
Click to expand...
Click to collapse
Before you do that try this build.prop file and see if it helps...Just remove the ".txt" and set your permissions same as the old build.prop file you renamed.
Tera Tike said:
Before you do that try this build.prop file and see if it helps...Just remove the ".txt" and set your permissions same as the old build.prop file you renamed.
Click to expand...
Click to collapse
Thank you guys for all the suggestions I followed your advices but the phone simply refuses to wake up after the call. I am trying to go back to factory default since this is my last hope. Really confused what is causing it.
HTC desire 816 touch screen not working properly, have to press several times each button. i bought this mobile this november 2014, instead of samsung S4, i bought this HTC, but it is irritating me lot, i tried for phone reset also, but getting same problem, im planning to go to show room for replacement,,,,,.......
Sir,
Please wait until mods will move this thread to the device specific forum.
For reply or more questions please register an account on XDA forums.
Stand by
Good luck
I have this problem to please help me to fix this
Sent from my iPad using Tapatalk
Haji Mohandes said:
I have this problem to please help me to fix this
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Same problem here. Typing a message is very hectic. Any body please help us if you have a solution.
Faisal
faisal892 said:
Same problem here. Typing a message is very hectic. Any body please help us if you have a solution.
Faisal
Click to expand...
Click to collapse
I just resolved this issue with help of mygamers. As advised by him I download stock 1,58 kernel from here https://www.androidfilehost.com/?w=...20a0dd4400e309e7d0fd260a360ef37e06faf2f86678f. I flashed it and now my cell phone's touch screen is working perfectly. My cell phone is HTC Desire 816 a5_dug. Try it, it may work for you as well.
Faisal
faisal892 said:
I just resolved this issue with help of mygamers. As advised by him I download stock 1,58 kernel from here . I flashed it and now my cell phone's touch screen is working perfectly. My cell phone is HTC Desire 816 a5_dug. Try it, it may work for you as well.
Faisal
Click to expand...
Click to collapse
Thanks for reply
I do that but my problem not solved and get very bad
Sent from my iPad using Tapatalk
Plzzzzzzzzzz heeeeeeelppp.. I'm with the same trouble I think is not a hardware issue..
Same issue here, 816x Asia. After any Rom I flash I get this a few mins after boot. Only on stock it works perfectly. I tried different kernels with roms and used 2 kinds of recoveries. Most recent versions of twrp and cwm ... Any ideas?
same problem on build 401.
I have same problem.I guess that was happen after 150MB update.
same problem
same problem plz help !!
does anybody found solution?
after flash stock kernel 1.58,left side of touch screen disabled.
God damn HTC.I bought this phone as gift for my wife.
maybe you didn't flash quite the right ROM. try updating via OTA
touch bug
seekfind said:
maybe you didn't flash quite the right ROM. try updating via OTA
Click to expand...
Click to collapse
have same problem on all different roms (carbon, cyanomode, pacs, miui, etc....)
exactly.what is the problem?software?or hardware?
does anybody test different kernel? I used stock kernel that was downloaded it from Internet.left side of screen disabled.
This does seem to be a Kernel problem; more specifically, the kernel not being compatible with the Rom or your specific hardware variant.. the only thing I can think of is an RUU exactly for your variant will solve all the problems. your phone's warranty is void so you can take it to HTC care (like Yas mobile in IR) so they flash the right RUU for you if you can't find it here. after getting the RUU, you can safely update to 1.58 via OTA to fix any remaining problems becasue it're really stable and bug free
I have the same issue. No one seems to know what it is. i am on the 816x asia single sim. I have tried stock kernal, garak kernal. CM11 CM12 Miui, Carbom. same thing happens. After i get through set up (time frame 5 mins tops) the touch screen stops reacting correctly. IE having to touch things more than once, swiping becomes harder and if i go into the pointer location DEV tool i can see that holding my finger in one spot it sparatically bouces around. Only on the stock rom the touch screen works fine. i have recovery 6.0.5.1 CWM i have tried flashing on TWRP. I am guessing this could be a 816x firmware issue. maybe this touchscreen isnt the same driver as the other htc's or if the source is packing the galaxy ts driver this is reacting to this version of phone. A guess at best.
thanks my friend.I think that it is a software problem,too.(I hope!?)because htc hardware quality is good.
does anybody tell this issue to HTC?
Buzzzz
masoudamirian said:
thanks my friend.I think that it is a software problem,too.(I hope!��)because htc hardware quality is good.
does anybody tell this issue to HTC?
Click to expand...
Click to collapse
From what I understand, This issue has nothing to do with hTC anymore. They have fixed the touch problem on their latest update (1.58). but if you install custom roms or backups not specifically made for your device, it is possible that you will have incompatible versions of HBoot, Kernel and Rom. this will lead to the situation that even after updating to 1.58 you'll still have the touch problem. now you can do several things to fix it; one is to try and find the suitable backup and after restoing that backup, update via OTA to fix the problem. another one is to install the RUU and then update via OTA. if you can't find the files or find the process diffiicult, you can take it to HTC care and explain that you need the RUU flashed and let them do it.
I've heard that they can even do it over the internet but I haven't tried personally
cm12 system UI crashes desire 816
I'm on cm12 nightly on my desire 816 dual sim wenevr I click on mobile network option in my settings the system UI crashes and I loose my network..... This happens each time I try it...n den I have to restart my device to get back my network....is der any solution to fix this prob so I can access that option in setting without crashing system UI
Thank you in advance
Hey guys. Couple months ago I bought LG G3 second-hand and it had the issue of randomly rebooting. I tried rooting it and installing custom ROM but it didn't help. I then bought a new battery and it didn't help it either. I even un-rooted it and went back to the stock ROM but it didn't help it either. I then re-rooted it and installed the custom ROM again but it still didn't help.... What can I even do here? Would it point out to the problem if I somehow get the logs when it crashes? if so, how do I do it?
Any help is greatly appreciated..
GeorgeMG said:
Hey guys. Couple months ago I bought LG G3 second-hand and it had the issue of randomly rebooting. I tried rooting it and installing custom ROM but it didn't help. I then bought a new battery and it didn't help it either. I even un-rooted it and went back to the stock ROM but it didn't help it either. I then re-rooted it and installed the custom ROM again but it still didn't help.... What can I even do here? Would it point out to the problem if I somehow get the logs when it crashes? if so, how do I do it?
Any help is greatly appreciated..
Click to expand...
Click to collapse
if you tried everything including fresh install and new battery then it's just the phone.
Still_living714 said:
if you tried everything including fresh install and new battery then it's just the phone.
Click to expand...
Click to collapse
I have to point out that reboots are much less frequent after reinstalling rom this time. I had like 10 restarts a day, and now it's 2 at max. They'll gradually get more frequent though, probably
Download OS Monitor or another app that will allow you to export logs. When it randomly shuts down, note the time, and check the logs when you get it back up.
Even if it's a hardware problem, you'll likely be able to see what is failing. You might be able to replace it without too much hassle, or even taking it to a repair shop.
v1nsai said:
Download OS Monitor or another app that will allow you to export logs. When it randomly shuts down, note the time, and check the logs when you get it back up.
Even if it's a hardware problem, you'll likely be able to see what is failing. You might be able to replace it without too much hassle, or even taking it to a repair shop.
Click to expand...
Click to collapse
Thanks for responding. Could you please tell me how to acquire the logs using the OS Monitor? I pressed "Export Logs" but don't know whers it saved them :/