Ok so I've been trying to get flashtool to work with my xperia z1c but I can't get the phone to stay in flashmode. The green led lights briefly and flashtool detects a device in flashmode but after a short time it just drops out of flashmode and boots normally. I originally blamed windows 8.1 but have tried 2 windows 7 machines with the same results. Have tried the Sony z1c drivers package and the latest flashtool drivers - same result. I've searched on Google and found people with the same problem on different xperia devices but has anyone else had the same problem with their z1c? if so has anyone solved it?
Sent from my D5503 using xda app-developers app
So what is the problem? If the phone does not stay long enough in flashmode, try this:
Open flashtool
Click flash, and set up everything (firmware, wipe, etc.)
Now click on flash
After 30 seconds plug in your phone in flashmode.
twilliams08 said:
Ok so I've been trying to get flashtool to work with my xperia z1c but I can't get the phone to stay in flashmode. The green led lights briefly and flashtool detects a device in flashmode but after a short time it just drops out of flashmode and boots normally. I originally blamed windows 8.1 but have tried 2 windows 7 machines with the same results. Have tried the Sony z1c drivers package and the latest flashtool drivers - same result. I've searched on Google and found people with the same problem on different xperia devices but has anyone else had the same problem with their z1c? if so has anyone solved it?
Sent from my D5503 using xda app-developers app
Click to expand...
Click to collapse
Happened to me too. I just flashed it before it rebooted, once it starts flashing it wont reboot it'll finish the process. So no worries everything worked out fine.
Thanks for the responses. I'd previously tried to flash an ftf by putting the phone into flashmode first then pressing flash and it always rebooted before the files were prepared so assumed there was something wrong. If you prepare the files first then put the phone into flashmode then all is okay. Thanks again.
Sent from my D5503 using xda app-developers app
z1c flash mode
twilliams08 said:
Thanks for the responses. I'd previously tried to flash an ftf by putting the phone into flashmode first then pressing flash and it always rebooted before the files were prepared so assumed there was something wrong. If you prepare the files first then put the phone into flashmode then all is okay. Thanks again.
Sent from my D5503 using xda app-developers app
Click to expand...
Click to collapse
hey guys
i have same problem with my z1c but with a difference that my phone doesn't boot into flash mode at all , even for a second
its led just become green and then red and turn off
do you know what's the problem?
i unlocked the bootloader and its rom is cm 11
semolation said:
hey guys
i have same problem with my z1c but with a difference that my phone doesn't boot into flash mode at all , even for a second
its led just become green and then red and turn off
do you know what's the problem?
i unlocked the bootloader and its rom is cm 11
Click to expand...
Click to collapse
how do you boot into flashmode?
the right way is: turn off your device, open flashtools, choose flashmode, choose your ftf you want to flash and wait until finished,
push Vol- and hold it, then plug your device via usb to the computer, then flashtool does its job...
moonryder said:
how do you boot into flashmode?
the right way is: turn off your device, open flashtools, choose flashmode, choose your ftf you want to flash and wait until finished,
push Vol- and hold it, then plug your device via usb to the computer, then flashtool does its job...
Click to expand...
Click to collapse
i do it as you said
but it doesn't recognize the phone
semolation said:
i do it as you said
but it doesn't recognize the phone
Click to expand...
Click to collapse
1. install Flashtool-drivers (you will find it in Flashtool\drivers
2. reboot your device
3. connect your device to PC (now it will be recognized)
4. shutdown your device
5. now the same as i mentioned in my previous post
Related
My phone is suddenly death.
Only when i plug in my USB charger the red led is going on.
Computer is not reconizing my phone. Can somebody help i don't now what to do.
ff20000 said:
My phone is suddenly death.
Only when i plug in my USB charger the red led is going on.
Computer is not reconizing my phone. Can somebody help i don't now what to do.
Click to expand...
Click to collapse
what did you do to cause its death?
Hey, i have the same problem. Yesterday when i installing new rom, there was a error and now i can't switch on the phone or plug in into my PC (doesnt detect). (sorry for my bad english :S)
Happened to me, charge it for a while and see if it turns on
I charged it all night and it didn't help.
Just flash the new rom
Sent from my LT26i using XDA Premium App
Same happened to me 2 after i partitioned the sdcard
PhoenixDD said:
Same happened to me 2 after i partitioned the sdcard
Click to expand...
Click to collapse
Anyone a solution how to fix it?
I had my phone the whole night on the charger, nothing changed.
Left my phone for a while.
I thought i will gif it a try and plugged it in the charger and suddenly there it was again.
My phone is working. I think the battery was empty.
Thanx you all
ff20000 said:
My phone is suddenly death.
Only when i plug in my USB charger the red led is going on.
Computer is not reconizing my phone. Can somebody help i don't now what to do.
Click to expand...
Click to collapse
First charge your phone for a while, then download flashtool and sony xperia s official firmware.
As your phone is switched off, press and hold volume down button and connect it to the pc, green led will turn on,then flash your phone with flashtool.
I always use this method when i brick my xperia s.
Xocus said:
First charge your phone for a while, then download flashtool and sony xperia s official firmware.
As your phone is switched off, press and hold volume down button and connect it to the pc, green led will turn on,then flash your phone with flashtool.
I always use this method when i brick my xperia s.
Click to expand...
Click to collapse
But my pc does't detect my xperia (it says: qhsusb_dload).
EDIT: Ok, now PC detect Phone but i can't turn on the flashmode...
Log flashtool:
25/044/2012 17:44:30 - INFO - Device connected with USB debugging off
25/044/2012 17:44:30 - INFO - For 2011 devices line, be sure you are not in MTP mode
coffee5800 said:
But my pc does't detect my xperia (it says: qhsusb_dload).
EDIT: Ok, now PC detect Phone but i can't turn on the flashmode...
Log flashtool:
25/044/2012 17:44:30 - INFO - Device connected with USB debugging off
25/044/2012 17:44:30 - INFO - For 2011 devices line, be sure you are not in MTP mode
Click to expand...
Click to collapse
be sure to install the drivers for fastboot and flashmode.
wynradaure said:
be sure to install the drivers for fastboot and flashmode.
Click to expand...
Click to collapse
I do it twice. Why i can't turn on the flash mode in my phone ?? (vol down + plug into PC)
coffee5800 said:
I do it twice. Why i can't turn on the flash mode in my phone ?? (vol down + plug into PC)
Click to expand...
Click to collapse
With the power off?
Sent from my Jellybean Xperia S
Ben36 said:
With the power off?
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
Yep.
coffee5800 said:
Yep.
Click to expand...
Click to collapse
Try installing PC Companion or/and Sony update service and maybe you could use one of them to recover and install stock rom again
Or if you can't install it using PCC or sus, try flashtool again, because the two sony programs will install drivers , too
Sent from my Nexus 7 running Android 4.2.1
mihahn said:
Try installing PC Companion or/and Sony update service and maybe you could use one of them to recover and install stock rom again
Or if you can't install it using PCC or sus, try flashtool again, because the two sony programs will install drivers , too
Sent from my Nexus 7 running Android 4.2.1
Click to expand...
Click to collapse
I have exactly the same problem with 2 of my xperia S'es. I really want to fix this issue, because it's beginning to be expensive to buy one after the other. Always going into this without really knowing why.
Neither PC Companion, Sony Update Service, or Emma work to recover....
For now i'm following this tutorial : http://forum.xda-developers.com/showthread.php?t=2049813& :good:
Hi Guys
I tried to install Ice Bean rom on my device using CWM and when it asked to reboot my device
my phone stuck to Sony Logo and doesn't respond to anything...
my pc doesn't recognize it (as if nothing is connected to my pc)
when i hold back button and press on power button it only blink blue for 1 sec and led goes off
i tried to hold volume down button and press power button and nothing happened
only a vibrate for a sec then stuck to sony logo
battery is charged
i think i bricked it
how to workaround it please help
is there any option to get it back
maybe using Testpoint or i don't know since my phone is not recognized by the pc
please help
before u answer please read (my phone is not recognized by the usb cable) so i guess solutions using usb cables won't help
please help....:fingers-crossed:
Sv: [Q] My sony ericsson arc s is stuck on sony logo and pc doesn't recognize it
yazanallahham said:
Hi Guys
I tried to install Ice Bean rom on my device using CWM and when it asked to reboot my device
my phone stuck to Sony Logo and doesn't respond to anything...
my pc doesn't recognize it (as if nothing is connected to my pc)
when i hold back button and press on power button it only blink blue for 1 sec and led goes off
i tried to hold volume down button and press power button and nothing happened
only a vibrate for a sec then stuck to sony logo
battery is charged
i think i bricked it
how to workaround it please help
is there any option to get it back
maybe using Testpoint or i don't know since my phone is not recognized by the pc
please help
before u answer please read (my phone is not recognized by the usb cable) so i guess solutions using usb cables won't help
please help....:fingers-crossed:
Click to expand...
Click to collapse
Your bootloader was unlocked before you flashed the specific ROM?
Sent from my GT-I9300 using xda app-developers app
Destroyedbeauty said:
Your bootloader was unlocked before you flashed the specific ROM?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yes it was unlocked using the SE method:crying:
yazanallahham said:
Yes it was unlocked using the SE method:crying:
Click to expand...
Click to collapse
I think your CMW is removed.
you have to flash kernel once again.
bjchettri said:
I think your CMW is removed.
you have to flash kernel once again.
Click to expand...
Click to collapse
how to flash it if my pc doesn't recognize my phone?
yazanallahham said:
how to flash it if my pc doesn't recognize my phone?
Click to expand...
Click to collapse
It's simple dude you have to go to bootloader mode. press and hold menu button untill you plugged your device into the pc/laptop.
bjchettri said:
It's simple dude you have to go to bootloader mode. press and hold menu button untill you plugged your device into the pc/laptop.
Click to expand...
Click to collapse
I already tried this and my pc still doesn't recognize it
nothing happens
my phone shows sony logo and vibrates only when i press power button
yazanallahham said:
I already tried this and my pc still doesn't recognize it
nothing happens
my phone shows sony logo and vibrates only when i press power button
Click to expand...
Click to collapse
Then do a fresh installation through the flashtool. flash a official firmware and do the same procedure from the beginning.
bjchettri said:
Then do a fresh installation through the flashtool. flash a official firmware and do the same procedure from the beginning.
Click to expand...
Click to collapse
how can i use flashtool if my pc doesn't recognize my phone which means that the flashtool won't be able to recognize the phone too
?????
yazanallahham said:
how can i use flashtool if my pc doesn't recognize my phone which means that the flashtool won't be able to recognize the phone too
?????
Click to expand...
Click to collapse
Oh, dude flashtool just need your device driver and you have to press back button untill you connect your phone on your pc and it also shown on flashtool which is included in procedure of flashing through flashtool and one thing PC not need to recognized your device because flashtool is the only one method to recover bricked phone. that's it .. if you got confused then please search on google you will find the solution.
bjchettri said:
Oh, dude flashtool just need your device driver and you have to press back button untill you connect your phone on your pc and it also shown on flashtool which is included in procedure of flashing through flashtool and one thing PC not need to recognized your device because flashtool is the only one method to recover bricked phone. that's it .. if you got confused then please search on google you will find the solution.
Click to expand...
Click to collapse
Dear bjchettri
I do appreciate all your efforts
I have to explain the situation just to make things more clear because it looks like you misunderstand me
when I connect my phone (in all modes "Bootloader, Fastboot, normal, recovery..etc) nothing happens on my pc
even in device manager (i'm using Microsoft windows) the system doesn't show any item for a new attached device or an item for an defined attached driver (which used to appear all modes)
the flashtool needs the system to find an attached device to communicate with (usually the attached device name looks like "android phone", SE android or something this (depends on ur phone brand, model)
now since my system doesn't find any device when I connect my mobile then the flashtool won't be able to communicate with my device (even if i tried to boot my device in all modes "bootloader, fastboot, normal, recovery) by holding specific buttons (menu or volumn down or back buttons)
and if you read my question you will see that i was asking if anyone knows any way to connect my phone using testpoints or something like this because i though maybe I can let my pc to recognize my phone using the testpoints method.
I'm not sure but if i could make my phone recognized by the pc then i will have like 10 ways to find the problem and fix it.
Hi yazanallahham
I have the same issue, could not find any solution yet, wondering if you have fixed your fone ?
yazanallahham said:
Dear bjchettri
I do appreciate all your efforts
I have to explain the situation just to make things more clear because it looks like you misunderstand me
when I connect my phone (in all modes "Bootloader, Fastboot, normal, recovery..etc) nothing happens on my pc
even in device manager (i'm using Microsoft windows) the system doesn't show any item for a new attached device or an item for an defined attached driver (which used to appear all modes)
the flashtool needs the system to find an attached device to communicate with (usually the attached device name looks like "android phone", SE android or something this (depends on ur phone brand, model)
now since my system doesn't find any device when I connect my mobile then the flashtool won't be able to communicate with my device (even if i tried to boot my device in all modes "bootloader, fastboot, normal, recovery) by holding specific buttons (menu or volumn down or back buttons)
and if you read my question you will see that i was asking if anyone knows any way to connect my phone using testpoints or something like this because i though maybe I can let my pc to recognize my phone using the testpoints method.
I'm not sure but if i could make my phone recognized by the pc then i will have like 10 ways to find the problem and fix it.
Click to expand...
Click to collapse
Is your bootloader unlocked?If its locked then try to fix it with SEUS not PC Companion downlod SEUS and try.
Sent from my Xperia Arc LT15i using XDA
I recently flashed CM9 to my phone, but now i want to move on to JB, but for some reason i can not get into flash mode to write a different FTF.
When i I try to get into flash mode, I power the device off, hold the back button, and insert the USB cable. The LED on top flickers green then the screen comes on the the charging screen.
The same happens when I try to use fastboot except blue light flickers.
I have tried diferent computers, cables and OS's im not sure what else to try.
Download flashtool and install the drivers for your phone then leave your phone and enable unknown sources and enable usb debugging then open flashtool then press flash icon and select fastboot mode then plug your phone in then select reboot into fastboot mode via adb
Sent from my R800i using xda app-developers app
FaiselW said:
Download flashtool and install the drivers for your phone then leave your phone and enable unknown sources and enable usb debugging then open flashtool then press flash icon and select fastboot mode then plug your phone in then select reboot into fastboot mode via adb
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
I ran the driver utility and even when I send reboot bootloader via adb, the LED only flickers blue for a moment, then it boots to CWM.
I didn't think the drivers on the computer would change if the phone goes into flash mode or not though.
Default Cant Get To FastBoot or Flash Mode
You would need to be in flashmode (green light) to install a stock FTF not fastboot mode has suggested above. Have you tried flashing another version of CM9 with your phone via cwm and then trying from there see if the problem is not your rom.If not it could be a driver issue.
tallman43 said:
You would need to be in flashmode (green light) to install a stock FTF not fastboot mode has suggested above. Have you tried flashing another version of CM9 with your phone via cwm and then trying from there see if the problem is not your rom.If not it could be a driver issue.
Click to expand...
Click to collapse
I know i need to be in flash mode, i just reinstalled cm9.1.0 and it still has the same problem. I dont know what to do. I have tried multiple cords, I have used ubuntu ,win7 and win8 with the drivers installed and reinstalled. Im worried that my phone is broken.
Ngong0 said:
I know i need to be in flash mode, i just reinstalled cm9.1.0 and it still has the same problem. I dont know what to do. I have tried multiple cords, I have used ubuntu ,win7 and win8 with the drivers installed and reinstalled. Im worried that my phone is broken.
Click to expand...
Click to collapse
(1) Have you installed other roms before your problem started did this only start after installing CM9
(2) Have you flashed any other kernels before CM9 or was CM9 your first rom/kernel flash
Noticed on your first post you wrote that you hold the back button then attached the usb did you do this when flashtool said or before, you need to connect the usb exactly when flashtool tells you to like below step 5
(1) How to flash a stock .ftf Rom
(2) load & place .ftf rom in Windows/flashtool/firmware folder
(3) Open flashtool press lightening icon press flashmode
(4) Select your .ftf you placed in flashtool /firmware folder earlier
(5) Wait! Flashtool will tell you to connect your phone!
(6) Press & hold back button while connecting phone to PC green light will come on.
(7) Wait while flashtool starts flashing your stock rom.When finished it will tell you to reboot
(8) Finished unplug switch your phone on done!
Sorry if you already do it like this but some people forget and connect the usb too early Also I would recommend downloading a different version of flashtool some people have managed to get there phone working by using a older version of flashtool:good:
tallman43 said:
(1) Have you installed other roms before your problem started did this only start after installing CM9
(2) Have you flashed any other kernels before CM9 or was CM9 your first rom/kernel flash
Noticed on your first post you wrote that you hold the back button then attached the usb did you do this when flashtool said or before, you need to connect the usb exactly when flashtool tells you to like below step 5
(1) How to flash a stock .ftf Rom
(2) load & place .ftf rom in Windows/flashtool/firmware folder
(3) Open flashtool press lightening icon press flashmode
(4) Select your .ftf you placed in flashtool /firmware folder earlier
(5) Wait! Flashtool will tell you to connect your phone!
(6) Press & hold back button while connecting phone to PC green light will come on.
(7) Wait while flashtool starts flashing your stock rom.When finished it will tell you to reboot
(8) Finished unplug switch your phone on done!
Sorry if you already do it like this but some people forget and connect the usb too early Also I would recommend downloading a different version of flashtool some people have managed to get there phone working by using a older version of flashtool:good:
Click to expand...
Click to collapse
(1) yes, i have installed several roms before CM9 and i was always able to enter flash mode.
(2)I have tried doom kernel and several other kernels as well
I have waited till flash tool prompts, but IIRC id didn't matter in the past, flashtool would see what mode it was in and proceed.
Thank you for the descriptive reply.
Did you try a older version of flashtool http://androxyde.github.io/index.html?1375894152000
tallman43 said:
Did you try a older version of flashtool http://androxyde.github.io/index.html?1375894152000
Click to expand...
Click to collapse
I just tried versions 7 and 8, it doesn't seem to help.
I feel like this is something wrong with my phone though, I remember the phone being able to go into fast boot and flash mode at any time, as long as the computer was on. It is really weird how it flashes the color on the LED.
Ngong0 said:
I just tried versions 7 and 8, it doesn't seem to help.
I feel like this is something wrong with my phone though, I remember the phone being able to go into fast boot and flash mode at any time, as long as the computer was on. It is really weird how it flashes the color on the LED.
Click to expand...
Click to collapse
I so this quote on another thread similar problem to yours this is what he did:
Quote: Funny thing though is that in order to get into either mode, I have to remove the battery while it is plugged in and then hold down the corresponding key while inserting the battery and the corresponding light will then light up. That seems to be the only way to get into the modes. And sometimes this does't work, but it seems to work more than not.
This guy did this to get into fastboot and flashmode worth a try?
tallman43 said:
I so this quote on another thread similar problem to yours this is what he did:
Quote: Funny thing though is that in order to get into either mode, I have to remove the battery while it is plugged in and then hold down the corresponding key while inserting the battery and the corresponding light will then light up. That seems to be the only way to get into the modes. And sometimes this does't work, but it seems to work more than not.
This guy did this to get into fastboot and flashmode worth a try?
Click to expand...
Click to collapse
no luck... The light only blinks then goes into charging mode...
Edit:Is there a test point or something that would force the phone into one of these modes?
Ngong0 said:
no luck... The light only blinks then goes into charging mode...
Edit:Is there a test point or something that would force the phone into one of these modes?
Click to expand...
Click to collapse
Sounds like TA damaged you could try this but it's a paid service http://octopusbox.com/eng/news/details/259....Or someone reading this thread might know a better way :fingers-crossed:
tallman43 said:
Sounds like TA damaged you could try this but it's a paid service http://octopusbox.com/eng/news/details/259....Or someone reading this thread might know a better way :fingers-crossed:
Click to expand...
Click to collapse
Im looking to possibly switch carriers and this will be just another push towards it. lol
tallman43 said:
Sounds like TA damaged you could try this but it's a paid service http://octopusbox.com/eng/news/details/259....Or someone reading this thread might know a better way :fingers-crossed:
Click to expand...
Click to collapse
I read this for another phone and it is a shot in the dark, but if the boot block were zeroed out, it forces it into fastboot. If this can possibly work, what block device is the boot partition?
I will not bee too disappointed if the phone is bricked.
Ngong0 said:
I read this for another phone and it is a shot in the dark, but if the boot block were zeroed out, it forces it into fastboot. If this can possibly work, what block device is the boot partition?
I will not bee too disappointed if the phone is bricked.
Click to expand...
Click to collapse
huh? can you say that again please.
Hi guys!
I have Sony Xperia Arc S.
Is it possible to put it in a Flashmode without a "Back" button? My BackButton is broken, I think it is a road-wire on the button's board.
BTW Fastboot mode working fine.
Hi, im on the latest .101 FW and im trying to downgrade to .67 so i can root and install a new custom rom. Ive installed a custom ROM before on this phone following the rooting procedure by this guide
http://forum.xda-developers.com/showthread.php?t=2458268, but now every time i connect to flashtool64, it says device connected in flash mode, but disconnects after a minute or so. What am i doing wrong? I've got USB debugging and unknown sources on.
Thanks, sid.
sid3091 said:
hi, im on the latest .101 fw and im trying to downgrade to .67 so i can root and install a new custom rom. Ive installed a custom rom before on this phone following the rooting procedure by this guide
http://forum.xda-developers.com/showthread.php?t=2458268, but now every time i connect to flashtool64, it says device connected in flash mode, but disconnects after a minute or so. What am i doing wrong? I've got usb debugging and unknown sources on.
Thanks, sid.
Click to expand...
Click to collapse
actually your have to first select the rom in flash tool then "wait" for tool to prepare files then the tool will prompt then connect your phone
My ZL has been acting weird lately, powering off on its own, and requiring a power source to boot back up.
I tried connecting to flashtool last night, and it works, but the green led that supposed to light up, just quickly blinks on then off, and stays off.
Yet flashtool is still telling me my device is connected in flashmode..... weird.
I was too scared to try and flash an FTF because i have a feeling the phone will just randomly power off.
ATRIXXIRTA said:
My ZL has been acting weird lately, powering off on its own, and requiring a power source to boot back up.
I tried connecting to flashtool last night, and it works, but the green led that supposed to light up, just quickly blinks on then off, and stays off.
Yet flashtool is still telling me my device is connected in flashmode..... weird.
I was too scared to try and flash an FTF because i have a feeling the phone will just randomly power off.
Click to expand...
Click to collapse
My LED does the same, just blinks on and off when connecting to flashtool.
When I connect in flashmode and wait for a minute or so, the phone boots automatically.
But it always behaved like this since I bought the phone .
Flashing works like it should and it always worked. I think it's normal.
okay, ive got another problem. Im trying to unlock my bootloader via flashtool, and after connecting my phone with the volume down button pressed, it does nothing, just asks me to re connect my phone. Any idea whats wrong?
sid3091 said:
okay, ive got another problem. Im trying to unlock my bootloader via flashtool, and after connecting my phone with the volume down button pressed, it does nothing, just asks me to re connect my phone. Any idea whats wrong?
Click to expand...
Click to collapse
Double check that your drivers are installed correctly
ATRIXXIRTA said:
Double check that your drivers are installed correctly
Click to expand...
Click to collapse
Which particular drivers are you talking about? How to re install them?
sid3091 said:
Which particular drivers are you talking about? How to re install them?
Click to expand...
Click to collapse
http://developer.sonymobile.com/downloads/drivers/
Sent from my Xperia ZL using Tapatalk
ATRIXXIRTA said:
http://developer.sonymobile.com/downloads/drivers/
Sent from my Xperia ZL using Tapatalk
Click to expand...
Click to collapse
There arent any for the ZL. Should I install the ones for Xperia Z?
sid3091 said:
There arent any for the ZL. Should I install the ones for Xperia Z?
Click to expand...
Click to collapse
Ya Z drivers will work
Sent from my Xperia ZL using Tapatalk
ATRIXXIRTA said:
Ya Z drivers will work
Sent from my Xperia ZL using Tapatalk
Click to expand...
Click to collapse
I should mention that I'm trying to unlock my bootloader while in existenz v4 ROM. Does this make any difference? Or should i flash a .67 ftf and unlock my bootloader.
Hey guys , my xperia m ( single sim ) is stuck on the sony logo whenever i try to boot it up.
I rooted my phone many months and it was perfect till this morning and then suddenly it got stuck at the sony logo.
Ive tried to fix it via the pc companion but it doesnt detect it . Now the battery has also run out so when i try to charge it , it shows the led for charging but then the sony logo comes up on its on and stays stuck there. Please help =(
That is a simple soft-brick/bootloop (depending on who you ask, I'd say bootloop).
Charge the phone for a couple of hours and then flash stock firmware with flashtool. To do this you will need to download the stock firmware ftf (these can ALL be found in the general section, don't ask for links) and also flashtool (http://www.flashtool.net/downloads.php). Move the ftf to the firmware folder to where you extracted flashtool to (the C: is the best bet).
Once you have both of those things and your phone has charge in it open flashtool. Then click on the lightning bolt icon and then flashmode. Select the firmware you have downloaded.
UNTICK Wipe cache and data.
Click flash.
Wait for flashtool to tell you to connect your phone in flashmode (do this by holding volume down (I think) while the phone is off and you are connecting the USB cable).
Wait for the firmware to finish flashing.
If you get an error saying that loader.sin has finished processing with errors open the ftf with WinRar (or something similar) and delete the loader.sin file and make sure that you save the changes to the ftf.
If you are still stuck on the Sony logo after flashing, remove your battery and then put it back in and try to turn on the device again. If you are still stuck on the Sony logo after that you will have to wipe the cache and data with flashtool.
Try sony pc companian support
Sent from my C2305 using XDA Free mobile app
I read about the flashing thing on other sites aswell but what i was worried about was the fact that since pc companion isnt dectecting my phone will the flash be able to go through considering the fact that since pc companion isnt dectecting it even the flash tool might not?
optimusbanana said:
I read about the flashing thing on other sites aswell but what i was worried about was the fact that since pc companion isnt dectecting my phone will the flash be able to go through considering the fact that since pc companion isnt dectecting it even the flash tool might not?
Click to expand...
Click to collapse
Flashtool will definitely detect it, don't worry. PC Companion needs the phone to actually be booted to be able to detect it, whereas flashtool only needs the phone to be in either fastboot mode or flash mode to detect it. Both of these modes are initiated by the user when they are plugging in the USB cable and holding the respective volume button and the phone is off.
gamer649 said:
Flashtool will definitely detect it, don't worry. PC Companion needs the phone to actually be booted to be able to detect it, whereas flashtool only needs the phone to be in either fastboot mode or flash mode to detect it. Both of these modes are initiated by the user when they are plugging in the USB cable and holding the respective volume button and the phone is off.
Click to expand...
Click to collapse
Thank you for helping me just btw
I know this'll annoy you a bit but the version that i have to flash it with is the stock one? Because i searched on the internet and some are with the 4.3 one and some are 4.2.2 so im a bit confused. Sorry im kind of a noob at this T_T
And flashtool first says that my phone is connected with usb debugging on then says phone is disconnected when its not :/
optimusbanana said:
Thank you for helping me just btw
I know this'll annoy you a bit but the version that i have to flash it with is the stock one? Because i searched on the internet and some are with the 4.3 one and some are 4.2.2 so im a bit confused. Sorry im kind of a noob at this T_T
Click to expand...
Click to collapse
Any stock firmware to the device will work, so it can be any of the 4.1.2 variants or and of the 4.3 variants (4.2 is for dual SIM). And don't worry about being a noob, all of us were at one point or another.
optimusbanana said:
And flashtool first says that my phone is connected with usb debugging on then says phone is disconnected when its not :/
Click to expand...
Click to collapse
When you are flashing a firmware be sure to keep the cable firmly connected throughout the entire process (use a different cable if the one you already have is a bit loose) and don't mess with the phone at all. Can you post the whole log you got from flashtool? Either in text form or through a screenshot?