My phone is suddenly death.
Only when i plug in my USB charger the red led is going on.
Computer is not reconizing my phone. Can somebody help i don't now what to do.
ff20000 said:
My phone is suddenly death.
Only when i plug in my USB charger the red led is going on.
Computer is not reconizing my phone. Can somebody help i don't now what to do.
Click to expand...
Click to collapse
what did you do to cause its death?
Hey, i have the same problem. Yesterday when i installing new rom, there was a error and now i can't switch on the phone or plug in into my PC (doesnt detect). (sorry for my bad english :S)
Happened to me, charge it for a while and see if it turns on
I charged it all night and it didn't help.
Just flash the new rom
Sent from my LT26i using XDA Premium App
Same happened to me 2 after i partitioned the sdcard
PhoenixDD said:
Same happened to me 2 after i partitioned the sdcard
Click to expand...
Click to collapse
Anyone a solution how to fix it?
I had my phone the whole night on the charger, nothing changed.
Left my phone for a while.
I thought i will gif it a try and plugged it in the charger and suddenly there it was again.
My phone is working. I think the battery was empty.
Thanx you all
ff20000 said:
My phone is suddenly death.
Only when i plug in my USB charger the red led is going on.
Computer is not reconizing my phone. Can somebody help i don't now what to do.
Click to expand...
Click to collapse
First charge your phone for a while, then download flashtool and sony xperia s official firmware.
As your phone is switched off, press and hold volume down button and connect it to the pc, green led will turn on,then flash your phone with flashtool.
I always use this method when i brick my xperia s.
Xocus said:
First charge your phone for a while, then download flashtool and sony xperia s official firmware.
As your phone is switched off, press and hold volume down button and connect it to the pc, green led will turn on,then flash your phone with flashtool.
I always use this method when i brick my xperia s.
Click to expand...
Click to collapse
But my pc does't detect my xperia (it says: qhsusb_dload).
EDIT: Ok, now PC detect Phone but i can't turn on the flashmode...
Log flashtool:
25/044/2012 17:44:30 - INFO - Device connected with USB debugging off
25/044/2012 17:44:30 - INFO - For 2011 devices line, be sure you are not in MTP mode
coffee5800 said:
But my pc does't detect my xperia (it says: qhsusb_dload).
EDIT: Ok, now PC detect Phone but i can't turn on the flashmode...
Log flashtool:
25/044/2012 17:44:30 - INFO - Device connected with USB debugging off
25/044/2012 17:44:30 - INFO - For 2011 devices line, be sure you are not in MTP mode
Click to expand...
Click to collapse
be sure to install the drivers for fastboot and flashmode.
wynradaure said:
be sure to install the drivers for fastboot and flashmode.
Click to expand...
Click to collapse
I do it twice. Why i can't turn on the flash mode in my phone ?? (vol down + plug into PC)
coffee5800 said:
I do it twice. Why i can't turn on the flash mode in my phone ?? (vol down + plug into PC)
Click to expand...
Click to collapse
With the power off?
Sent from my Jellybean Xperia S
Ben36 said:
With the power off?
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
Yep.
coffee5800 said:
Yep.
Click to expand...
Click to collapse
Try installing PC Companion or/and Sony update service and maybe you could use one of them to recover and install stock rom again
Or if you can't install it using PCC or sus, try flashtool again, because the two sony programs will install drivers , too
Sent from my Nexus 7 running Android 4.2.1
mihahn said:
Try installing PC Companion or/and Sony update service and maybe you could use one of them to recover and install stock rom again
Or if you can't install it using PCC or sus, try flashtool again, because the two sony programs will install drivers , too
Sent from my Nexus 7 running Android 4.2.1
Click to expand...
Click to collapse
I have exactly the same problem with 2 of my xperia S'es. I really want to fix this issue, because it's beginning to be expensive to buy one after the other. Always going into this without really knowing why.
Neither PC Companion, Sony Update Service, or Emma work to recover....
For now i'm following this tutorial : http://forum.xda-developers.com/showthread.php?t=2049813& :good:
Related
Well I've done the one in the link http://forum.xda-developers.com/showthread.php?t=1948210&page=3.
Now the phone is bricked. No response at all.
Any ideas, suggestions .... Thanks in advance.
comnic5 said:
Well I've done the one in the link http://forum.xda-developers.com/showthread.php?t=1948210&page=3.
Now the phone is bricked. No response at all.
Any ideas, suggestions .... Thanks in advance.
Click to expand...
Click to collapse
while the phone is off connect it to pc, open Flashtool in fastboot mod. Flash a stock FW.
If that doesnt work open PC companion it should ask u to repair it if u follow istructions.
@deniel: It doesn't connect neither PC Companion or Flashtool. It doesn't enter in flashmode.
comnic5 said:
@deniel: It doesn't connect neither PC Companion or Flashtool. It doesn't enter in flashmode.
Click to expand...
Click to collapse
Open flashtool
connect arc to PC
click the lighting and choose flashmode
choose a FW
it will ask u to unplug the device and unplug it again holding the backbutton
didnt happen?
No. It doesn't recognize the device. No led, no power, nothing
comnic5 said:
No. It doesn't recognize the device. No led, no power, nothing
Click to expand...
Click to collapse
:\ strange. if u try to turn it on what happens? and try with pc comapnion to open it an look for "repair" or "solve problems" cant really remember (with phone unplugged) then it will tell u what to do
Have you pressed the menu key while connecting phone to computer?
bricked phone have to be OFF(remove battery and put back if necesaary if it's stuck at sony screen), prepare flashtool ftf and follow onscreen instruction and the flashtool will revive the phone.
Or maybe you could show the error msg from flashtool.
you are really bold in trying the untested bootunlocker, this definitely is a hard brick. hope you get out of this one.
bruce16878 said:
bricked phone have to be OFF(remove battery and put back if necesaary if it's stuck at sony screen), prepare flashtool ftf and follow onscreen instruction and the flashtool will revive the phone.
Or maybe you could show the error msg from flashtool.
you are really bold in trying the untested bootunlocker, this definitely is a hard brick. hope you get out of this one.
Click to expand...
Click to collapse
I bricked my phone 5 times and always solved like me and him said so tell us how the screenr reaction and the flashtool error
deniel said:
:\ strange. if u try to turn it on what happens? and try with pc comapnion to open it an look for "repair" or "solve problems" cant really remember (with phone unplugged) then it will tell u what to do
Click to expand...
Click to collapse
I try to turn it on but nothing happens. PC Companion doesn't recognize it.
deniel said:
I bricked my phone 5 times and always solved like me and him said so tell us how the screenr reaction and the flashtool error
Click to expand...
Click to collapse
bruce16878 said:
bricked phone have to be OFF(remove battery and put back if necesaary if it's stuck at sony screen), prepare flashtool ftf and follow onscreen instruction and the flashtool will revive the phone.
Or maybe you could show the error msg from flashtool.
you are really bold in trying the untested bootunlocker, this definitely is a hard brick. hope you get out of this one.
Click to expand...
Click to collapse
I wished I had the Sony screen. Well about the error is that it does not connect in flash mode.
comnic5 said:
I wished I had the Sony screen. Well about the error is that it does not connect in flash mode.
Click to expand...
Click to collapse
Which button u press while connecting the phone?
deniel said:
Which button u press while connecting the phone?
Click to expand...
Click to collapse
I tried with all.
Sorry for asking again: You started FlashTool (v0.9.8.0), clicked on the flash icon, selected "FlashMode", chose a firmware for your Arc S, activated "No final verification", clicked "OK", pressed the back button on the switched off phone WHILE plugging in the USB-Cable? No green LED - nothing? Did it work before?
comnic5 said:
I tried with all.
Click to expand...
Click to collapse
Sorry if we repeat the same thing, but it must work like this: you hve the phone off and unplugged. You open flashtool, select the flash icon (flashtool), select the FW, and it tell u to plug the device to pc while holdin back button.
Sure u hold the the backbutton while pluggin in? and after have selected the FW ?
You've to select the firmware first before plugging it in.
Daniel D. said:
You've to select the firmware first before plugging it in.
Click to expand...
Click to collapse
I know my friend. I flashed many many times. From X8 to XU till ArcS. I know flashtool. It doesn't connect. Only with testpoint said ZEUS flash device but it doesnt connect to flashtool neither PC Companion.
Sh**...
Daniel D. said:
Sh**...
Click to expand...
Click to collapse
Yeap. Is that I don't know how to restore my .TA file. I know what I changed but ... how????
Help me please??
LT18i
Locked Bootloader
Root access
Had CMW via Xtools, so when I replaced the rom that disapeared!
The problem is that I've forgot to run the 2nd part - device optimization, and now the touchscreen simply doesn't work...
Can't do nothing - USB Debugging is on by default (never forget that I can't touch the phone)
Can't upload another rom via flashtool, the only thing I'm able to do is change the kernel with the 1_lt18i_4.1.B.0.431_kernelDowngrade
If I try to put the uptodate kernel, flashtool stops on "Reading Device Information"
Already try to restore it with Pc companion, but no luck
USB device is detecting LT15 on windows!
This is a total mess, I'm lost, and I've googled and tryed dozens of things all day long.. I'm tyred, exhausted, and my 2 day old ARC S is bricked!!
Can someone point me a way out??
Remember:
- USB debbug of (have no access to activate it)
- CMW disapeared when installed this rom, so have no recovery menu
- Bootloader is locked
- Can't flash rom via flashtool
I'm devastated!!
Thanks in advance,
Ricardo
I've been searching tutorials from start to finish and can't find solution to my problem.
I have a Arc S from a friend that's bricked it gets stuck on sony ericcson logo.
Tried PC Companion not detected
Tried Update Service not detected
Tried Flashtool it detects phone as connected but without developer mode
18/005/2012 14:05:49 - INFO - Device connected with USB debugging off
18/005/2012 14:05:49 - INFO - For 2011 devices line, be sure you are not in MTP mode
I hold back key, no green led
I hold menu key, no blue led
Doesn't enter fastboot mode or flashmode.
Anyone knows how can i recover it? I don't know if it's unlocked bootloader or custom firmware or anything.
I think it maybe a kernel problem but didn't find tutorial to flash it without flashtool.
Regards,
Tried that already, when i hold the buttons (either back or menu) no led lights up when i connect usb it just shows the sony ericsson logo...
Regards.
Usb debug needs to be on
Sent from my LT15i using xda premium
I think your phone is bricked. For good.
Sent from my LT18i using xda app-developers app
what was done prior to the phone being like that?
Sent from your phone
tangosierra_ said:
what was done prior to the phone being like that?
Sent from your phone
Click to expand...
Click to collapse
From what i've been told it died overnight during an OTA update.
The only too ways the computer detects it is by getting stuck on sony logo and flashtool detecting it as usb debug disabled or by doing the testpoint and computer detecting it as a Zeus Flash Device.
All the other ways, holding buttons etc's always gets me to the stuck logo no leds no nothing.
Regards,
uha666 said:
From what i've been told it died overnight during an OTA update.
The only too ways the computer detects it is by getting stuck on sony logo and flashtool detecting it as usb debug disabled or by doing the testpoint and computer detecting it as a Zeus Flash Device.
All the other ways, holding buttons etc's always gets me to the stuck logo no leds no nothing.
Regards,
Click to expand...
Click to collapse
Service centre then as all else has failed.
Sent from my CM9'd Ray
Have you charged it?
Sent from your phone
tangosierra_ said:
Have you charged it?
Sent from your phone
Click to expand...
Click to collapse
Yes it's on a full battery.
Regards,
Is there any tool that can flash a device in Zeus Flash mode?
If you can't get the Phone in flashmode as you've already stated then you need a service centre. The only other alternative is to contact Alejandrissimo or Jinx13 who have SETool and will try and help remotely.
arc s
uha666 said:
Is there any tool that can flash a device in Zeus Flash mode?
Click to expand...
Click to collapse
hello i have a same phone as u and same problem .. can u tell me do u find solution ??? thanks
So were you just doing a standard OTA update and then you ran out of battery?
If you want, you could try Sony's new EMMA software for returning devices with unlocked bootloaders back to stock.
Did you unbricked you phone? I have the same problem after a wipe data from clocworkmod and i am unable to go in flashmode or recovery. Fashtool detect my device but just like your with debug off...
So did you manage to fix your device? Thx and srru for my bad english. Oh and my phone is locked.
amnezic said:
Did you unbricked you phone? I have the same problem after a wipe data from clocworkmod and i am unable to go in flashmode or recovery. Fashtool detect my device but just like your with debug off...
So did you manage to fix your device? Thx and srru for my bad english. Oh and my phone is locked.
Click to expand...
Click to collapse
I got the fastboot working so i messed around and got the dommkernel working.Though my pc isnt recognising the drivers and im looking for a fix.Once thats done i'll restore the system and hopefully get it fixed.
Elvizzz said:
I got the fastboot working so i messed around and got the dommkernel working.Though my pc isnt recognising the drivers and im looking for a fix.Once thats done i'll restore the system and hopefully get it fixed.
Click to expand...
Click to collapse
which drivers exactly?
Can you get into recovery?
Sent from my Nexus 5 using Tapatalk
Hi Guys
I tried to install Ice Bean rom on my device using CWM and when it asked to reboot my device
my phone stuck to Sony Logo and doesn't respond to anything...
my pc doesn't recognize it (as if nothing is connected to my pc)
when i hold back button and press on power button it only blink blue for 1 sec and led goes off
i tried to hold volume down button and press power button and nothing happened
only a vibrate for a sec then stuck to sony logo
battery is charged
i think i bricked it
how to workaround it please help
is there any option to get it back
maybe using Testpoint or i don't know since my phone is not recognized by the pc
please help
before u answer please read (my phone is not recognized by the usb cable) so i guess solutions using usb cables won't help
please help....:fingers-crossed:
Sv: [Q] My sony ericsson arc s is stuck on sony logo and pc doesn't recognize it
yazanallahham said:
Hi Guys
I tried to install Ice Bean rom on my device using CWM and when it asked to reboot my device
my phone stuck to Sony Logo and doesn't respond to anything...
my pc doesn't recognize it (as if nothing is connected to my pc)
when i hold back button and press on power button it only blink blue for 1 sec and led goes off
i tried to hold volume down button and press power button and nothing happened
only a vibrate for a sec then stuck to sony logo
battery is charged
i think i bricked it
how to workaround it please help
is there any option to get it back
maybe using Testpoint or i don't know since my phone is not recognized by the pc
please help
before u answer please read (my phone is not recognized by the usb cable) so i guess solutions using usb cables won't help
please help....:fingers-crossed:
Click to expand...
Click to collapse
Your bootloader was unlocked before you flashed the specific ROM?
Sent from my GT-I9300 using xda app-developers app
Destroyedbeauty said:
Your bootloader was unlocked before you flashed the specific ROM?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yes it was unlocked using the SE method:crying:
yazanallahham said:
Yes it was unlocked using the SE method:crying:
Click to expand...
Click to collapse
I think your CMW is removed.
you have to flash kernel once again.
bjchettri said:
I think your CMW is removed.
you have to flash kernel once again.
Click to expand...
Click to collapse
how to flash it if my pc doesn't recognize my phone?
yazanallahham said:
how to flash it if my pc doesn't recognize my phone?
Click to expand...
Click to collapse
It's simple dude you have to go to bootloader mode. press and hold menu button untill you plugged your device into the pc/laptop.
bjchettri said:
It's simple dude you have to go to bootloader mode. press and hold menu button untill you plugged your device into the pc/laptop.
Click to expand...
Click to collapse
I already tried this and my pc still doesn't recognize it
nothing happens
my phone shows sony logo and vibrates only when i press power button
yazanallahham said:
I already tried this and my pc still doesn't recognize it
nothing happens
my phone shows sony logo and vibrates only when i press power button
Click to expand...
Click to collapse
Then do a fresh installation through the flashtool. flash a official firmware and do the same procedure from the beginning.
bjchettri said:
Then do a fresh installation through the flashtool. flash a official firmware and do the same procedure from the beginning.
Click to expand...
Click to collapse
how can i use flashtool if my pc doesn't recognize my phone which means that the flashtool won't be able to recognize the phone too
?????
yazanallahham said:
how can i use flashtool if my pc doesn't recognize my phone which means that the flashtool won't be able to recognize the phone too
?????
Click to expand...
Click to collapse
Oh, dude flashtool just need your device driver and you have to press back button untill you connect your phone on your pc and it also shown on flashtool which is included in procedure of flashing through flashtool and one thing PC not need to recognized your device because flashtool is the only one method to recover bricked phone. that's it .. if you got confused then please search on google you will find the solution.
bjchettri said:
Oh, dude flashtool just need your device driver and you have to press back button untill you connect your phone on your pc and it also shown on flashtool which is included in procedure of flashing through flashtool and one thing PC not need to recognized your device because flashtool is the only one method to recover bricked phone. that's it .. if you got confused then please search on google you will find the solution.
Click to expand...
Click to collapse
Dear bjchettri
I do appreciate all your efforts
I have to explain the situation just to make things more clear because it looks like you misunderstand me
when I connect my phone (in all modes "Bootloader, Fastboot, normal, recovery..etc) nothing happens on my pc
even in device manager (i'm using Microsoft windows) the system doesn't show any item for a new attached device or an item for an defined attached driver (which used to appear all modes)
the flashtool needs the system to find an attached device to communicate with (usually the attached device name looks like "android phone", SE android or something this (depends on ur phone brand, model)
now since my system doesn't find any device when I connect my mobile then the flashtool won't be able to communicate with my device (even if i tried to boot my device in all modes "bootloader, fastboot, normal, recovery) by holding specific buttons (menu or volumn down or back buttons)
and if you read my question you will see that i was asking if anyone knows any way to connect my phone using testpoints or something like this because i though maybe I can let my pc to recognize my phone using the testpoints method.
I'm not sure but if i could make my phone recognized by the pc then i will have like 10 ways to find the problem and fix it.
Hi yazanallahham
I have the same issue, could not find any solution yet, wondering if you have fixed your fone ?
yazanallahham said:
Dear bjchettri
I do appreciate all your efforts
I have to explain the situation just to make things more clear because it looks like you misunderstand me
when I connect my phone (in all modes "Bootloader, Fastboot, normal, recovery..etc) nothing happens on my pc
even in device manager (i'm using Microsoft windows) the system doesn't show any item for a new attached device or an item for an defined attached driver (which used to appear all modes)
the flashtool needs the system to find an attached device to communicate with (usually the attached device name looks like "android phone", SE android or something this (depends on ur phone brand, model)
now since my system doesn't find any device when I connect my mobile then the flashtool won't be able to communicate with my device (even if i tried to boot my device in all modes "bootloader, fastboot, normal, recovery) by holding specific buttons (menu or volumn down or back buttons)
and if you read my question you will see that i was asking if anyone knows any way to connect my phone using testpoints or something like this because i though maybe I can let my pc to recognize my phone using the testpoints method.
I'm not sure but if i could make my phone recognized by the pc then i will have like 10 ways to find the problem and fix it.
Click to expand...
Click to collapse
Is your bootloader unlocked?If its locked then try to fix it with SEUS not PC Companion downlod SEUS and try.
Sent from my Xperia Arc LT15i using XDA
I am not able to put my xperia m in flashmode using the flashtool. I tried turning off phone and then holding volume down and inserting the USB cable but nothing happens, there is no led flashing when i do that. Also my phone is not charging while connected to pc when its turned off.
I have every driver installed and i am using the lastest version of flashtool.
Dude you need to hold Vol + button to enter in fastboot.
I have tried both volume up and vol down nothing happens.
Zexter21 said:
I have tried both volume up and vol down nothing happens.
Click to expand...
Click to collapse
Does your phone charge through your charger when it is switched off?
when you connect your phone to pc in normal mode then does it detects??
No my phone doesn't charge with the charger when its turned off. And my pc detects my phone when connected normally.
tabun1994 said:
Does your phone charge through your charger when it is switched off?
Click to expand...
Click to collapse
i have bricked my phone as well.. yes it turns blue after pushing and holding +volume up and it does charge through charger when it is switched off... How do i unbrick my phone if its a semi-brick??
Susheel_22 said:
i have bricked my phone as well.. yes it turns blue after pushing and holding +volume up and it does charge through charger when it is switched off... How do i unbrick my phone if its a semi-brick??
Click to expand...
Click to collapse
If it's a soft brick, you can repair from PCC or flash using flashtool.
This message was brought to you from my Sony Xperia M C1905 using Tapatalk.
Susheel_22 said:
i have bricked my phone as well.. yes it turns blue after pushing and holding +volume up and it does charge through charger when it is switched off... How do i unbrick my phone if its a semi-brick??
Click to expand...
Click to collapse
hard brick means ur phone will not even show a blink and led wont work even in fastboot..
u r having a soft-brick...means u have done something in system folder..
anyway to get phone to work...
download a .ftf of ur latest firmware of ur device[c1904/c1905/c2004/c2005 i think u know urs..] and flashtool...
use flashtool and flash the ftf...
u can see the firmware in xperia m android development...
for flashtool https://unrestrict.li/flashtool
guide here:
http://forum.xda-developers.com/showthread.php?t=2054486
So i have bricked my phone as well? How i am supposed to unbrick it with flashtool. As i already said the problem in the topic, nothing happens while holding vol + and inserting cable.
Zexter21 said:
So i have bricked my phone as well? How i am supposed to unbrick it with flashtool. As i already said the problem in the topic, nothing happens while holding vol + and inserting cable.
Click to expand...
Click to collapse
It must be a hard-brick bro.. You should take it to the repair center..
Zexter21 said:
So i have bricked my phone as well? How i am supposed to unbrick it with flashtool. As i already said the problem in the topic, nothing happens while holding vol + and inserting cable.
Click to expand...
Click to collapse
Lets just analyze your problem:
You launched flashtool and started a flash session.And then a window appeared in flashtool saying that you have to connect your phone in flashmode. You pressed Volume+ and connected your phone.
I want to know what happened next,
Did the window telling you to connect the device in flashmode close down automatically?
Was a pop-pup shown in your pc telling you to choose your phone model?
If these didnt happen, what else did?
I can help you certainly if you can answer these questions.
How do i unbrick my phone? I can't take it to center because i have rooted and unlocked bootloader.
Zexter21 said:
How do i unbrick my phone? I can't take it to center because i have rooted and unlocked bootloader.
Click to expand...
Click to collapse
If it's a hard brick we can do nothing about it.
This message was brought to you from my Sony Xperia M C1905 using Tapatalk.
Finally fixed the problem. I just pulled out the battery and left it for a minute then inserted again. Now everything is working fine.
Hi,
I'm having a similar problem, the phone I'm trying to repair doesn't enter on flashmode, only on fastboot mode, and I need to unlock bootloader and I can't because I can't put it on flashmode.... do you have any suggestions?
Regards
having the same problem my phone neither turn on or enter in flashmode
when i connect it to charge or any there source it just showing blue led... initially i was able to flash but every time i got some error now it just not doing anything please help... i m using c1904 xperia m:crying:
ansebovi said:
hard brick means ur phone will not even show a blink and led wont work even in fastboot..
u r having a soft-brick...means u have done something in system folder..
anyway to get phone to work...
download a .ftf of ur latest firmware of ur device[c1904/c1905/c2004/c2005 i think u know urs..] and flashtool...
use flashtool and flash the ftf...
u can see the firmware in xperia m android development...
for flashtool https://unrestrict.li/flashtool
guide here:
http://forum.xda-developers.com/showthread.php?t=2054486
Click to expand...
Click to collapse
having a similar problem.... all the methods suggested above require the phone to be in flashmode. and flashtool shows error while flashing ftf file.... help please.. thank you
Ok so I've been trying to get flashtool to work with my xperia z1c but I can't get the phone to stay in flashmode. The green led lights briefly and flashtool detects a device in flashmode but after a short time it just drops out of flashmode and boots normally. I originally blamed windows 8.1 but have tried 2 windows 7 machines with the same results. Have tried the Sony z1c drivers package and the latest flashtool drivers - same result. I've searched on Google and found people with the same problem on different xperia devices but has anyone else had the same problem with their z1c? if so has anyone solved it?
Sent from my D5503 using xda app-developers app
So what is the problem? If the phone does not stay long enough in flashmode, try this:
Open flashtool
Click flash, and set up everything (firmware, wipe, etc.)
Now click on flash
After 30 seconds plug in your phone in flashmode.
twilliams08 said:
Ok so I've been trying to get flashtool to work with my xperia z1c but I can't get the phone to stay in flashmode. The green led lights briefly and flashtool detects a device in flashmode but after a short time it just drops out of flashmode and boots normally. I originally blamed windows 8.1 but have tried 2 windows 7 machines with the same results. Have tried the Sony z1c drivers package and the latest flashtool drivers - same result. I've searched on Google and found people with the same problem on different xperia devices but has anyone else had the same problem with their z1c? if so has anyone solved it?
Sent from my D5503 using xda app-developers app
Click to expand...
Click to collapse
Happened to me too. I just flashed it before it rebooted, once it starts flashing it wont reboot it'll finish the process. So no worries everything worked out fine.
Thanks for the responses. I'd previously tried to flash an ftf by putting the phone into flashmode first then pressing flash and it always rebooted before the files were prepared so assumed there was something wrong. If you prepare the files first then put the phone into flashmode then all is okay. Thanks again.
Sent from my D5503 using xda app-developers app
z1c flash mode
twilliams08 said:
Thanks for the responses. I'd previously tried to flash an ftf by putting the phone into flashmode first then pressing flash and it always rebooted before the files were prepared so assumed there was something wrong. If you prepare the files first then put the phone into flashmode then all is okay. Thanks again.
Sent from my D5503 using xda app-developers app
Click to expand...
Click to collapse
hey guys
i have same problem with my z1c but with a difference that my phone doesn't boot into flash mode at all , even for a second
its led just become green and then red and turn off
do you know what's the problem?
i unlocked the bootloader and its rom is cm 11
semolation said:
hey guys
i have same problem with my z1c but with a difference that my phone doesn't boot into flash mode at all , even for a second
its led just become green and then red and turn off
do you know what's the problem?
i unlocked the bootloader and its rom is cm 11
Click to expand...
Click to collapse
how do you boot into flashmode?
the right way is: turn off your device, open flashtools, choose flashmode, choose your ftf you want to flash and wait until finished,
push Vol- and hold it, then plug your device via usb to the computer, then flashtool does its job...
moonryder said:
how do you boot into flashmode?
the right way is: turn off your device, open flashtools, choose flashmode, choose your ftf you want to flash and wait until finished,
push Vol- and hold it, then plug your device via usb to the computer, then flashtool does its job...
Click to expand...
Click to collapse
i do it as you said
but it doesn't recognize the phone
semolation said:
i do it as you said
but it doesn't recognize the phone
Click to expand...
Click to collapse
1. install Flashtool-drivers (you will find it in Flashtool\drivers
2. reboot your device
3. connect your device to PC (now it will be recognized)
4. shutdown your device
5. now the same as i mentioned in my previous post