Well I've done the one in the link http://forum.xda-developers.com/showthread.php?t=1948210&page=3.
Now the phone is bricked. No response at all.
Any ideas, suggestions .... Thanks in advance.
comnic5 said:
Well I've done the one in the link http://forum.xda-developers.com/showthread.php?t=1948210&page=3.
Now the phone is bricked. No response at all.
Any ideas, suggestions .... Thanks in advance.
Click to expand...
Click to collapse
while the phone is off connect it to pc, open Flashtool in fastboot mod. Flash a stock FW.
If that doesnt work open PC companion it should ask u to repair it if u follow istructions.
@deniel: It doesn't connect neither PC Companion or Flashtool. It doesn't enter in flashmode.
comnic5 said:
@deniel: It doesn't connect neither PC Companion or Flashtool. It doesn't enter in flashmode.
Click to expand...
Click to collapse
Open flashtool
connect arc to PC
click the lighting and choose flashmode
choose a FW
it will ask u to unplug the device and unplug it again holding the backbutton
didnt happen?
No. It doesn't recognize the device. No led, no power, nothing
comnic5 said:
No. It doesn't recognize the device. No led, no power, nothing
Click to expand...
Click to collapse
:\ strange. if u try to turn it on what happens? and try with pc comapnion to open it an look for "repair" or "solve problems" cant really remember (with phone unplugged) then it will tell u what to do
Have you pressed the menu key while connecting phone to computer?
bricked phone have to be OFF(remove battery and put back if necesaary if it's stuck at sony screen), prepare flashtool ftf and follow onscreen instruction and the flashtool will revive the phone.
Or maybe you could show the error msg from flashtool.
you are really bold in trying the untested bootunlocker, this definitely is a hard brick. hope you get out of this one.
bruce16878 said:
bricked phone have to be OFF(remove battery and put back if necesaary if it's stuck at sony screen), prepare flashtool ftf and follow onscreen instruction and the flashtool will revive the phone.
Or maybe you could show the error msg from flashtool.
you are really bold in trying the untested bootunlocker, this definitely is a hard brick. hope you get out of this one.
Click to expand...
Click to collapse
I bricked my phone 5 times and always solved like me and him said so tell us how the screenr reaction and the flashtool error
deniel said:
:\ strange. if u try to turn it on what happens? and try with pc comapnion to open it an look for "repair" or "solve problems" cant really remember (with phone unplugged) then it will tell u what to do
Click to expand...
Click to collapse
I try to turn it on but nothing happens. PC Companion doesn't recognize it.
deniel said:
I bricked my phone 5 times and always solved like me and him said so tell us how the screenr reaction and the flashtool error
Click to expand...
Click to collapse
bruce16878 said:
bricked phone have to be OFF(remove battery and put back if necesaary if it's stuck at sony screen), prepare flashtool ftf and follow onscreen instruction and the flashtool will revive the phone.
Or maybe you could show the error msg from flashtool.
you are really bold in trying the untested bootunlocker, this definitely is a hard brick. hope you get out of this one.
Click to expand...
Click to collapse
I wished I had the Sony screen. Well about the error is that it does not connect in flash mode.
comnic5 said:
I wished I had the Sony screen. Well about the error is that it does not connect in flash mode.
Click to expand...
Click to collapse
Which button u press while connecting the phone?
deniel said:
Which button u press while connecting the phone?
Click to expand...
Click to collapse
I tried with all.
Sorry for asking again: You started FlashTool (v0.9.8.0), clicked on the flash icon, selected "FlashMode", chose a firmware for your Arc S, activated "No final verification", clicked "OK", pressed the back button on the switched off phone WHILE plugging in the USB-Cable? No green LED - nothing? Did it work before?
comnic5 said:
I tried with all.
Click to expand...
Click to collapse
Sorry if we repeat the same thing, but it must work like this: you hve the phone off and unplugged. You open flashtool, select the flash icon (flashtool), select the FW, and it tell u to plug the device to pc while holdin back button.
Sure u hold the the backbutton while pluggin in? and after have selected the FW ?
You've to select the firmware first before plugging it in.
Daniel D. said:
You've to select the firmware first before plugging it in.
Click to expand...
Click to collapse
I know my friend. I flashed many many times. From X8 to XU till ArcS. I know flashtool. It doesn't connect. Only with testpoint said ZEUS flash device but it doesnt connect to flashtool neither PC Companion.
Sh**...
Daniel D. said:
Sh**...
Click to expand...
Click to collapse
Yeap. Is that I don't know how to restore my .TA file. I know what I changed but ... how????
Help me please??
LT18i
Locked Bootloader
Root access
Had CMW via Xtools, so when I replaced the rom that disapeared!
The problem is that I've forgot to run the 2nd part - device optimization, and now the touchscreen simply doesn't work...
Can't do nothing - USB Debugging is on by default (never forget that I can't touch the phone)
Can't upload another rom via flashtool, the only thing I'm able to do is change the kernel with the 1_lt18i_4.1.B.0.431_kernelDowngrade
If I try to put the uptodate kernel, flashtool stops on "Reading Device Information"
Already try to restore it with Pc companion, but no luck
USB device is detecting LT15 on windows!
This is a total mess, I'm lost, and I've googled and tryed dozens of things all day long.. I'm tyred, exhausted, and my 2 day old ARC S is bricked!!
Can someone point me a way out??
Remember:
- USB debbug of (have no access to activate it)
- CMW disapeared when installed this rom, so have no recovery menu
- Bootloader is locked
- Can't flash rom via flashtool
I'm devastated!!
Thanks in advance,
Ricardo
Related
I install this black theme http://forum.xda-developers.com/showthread.php?t=1084835 and I install back the original file again when i reboot it stuck after the SE animation and it keeps rebooting it self
how to recover guys pls help Thank You
Just repair using SEUS or PC companion.. If you've unlocked your bootloader then do the same with that instead..
Easy!
cant use SEUS or PC companion my phone stuck SEUS PC companion cant detect my phone.... I did not unlock my bootloader too lol..... is there any other way?
you have to flash you phone ..
i had the same issue, installed the battery mod icon..
no solution but flashing
swishman said:
you have to flash you phone ..
i had the same issue, installed the battery mod icon..
no solution but flashing
Click to expand...
Click to collapse
how to flash my phone without bootloader unlock?
oooops double post.
lighterlp said:
how to flash my phone without bootloader unlock?
Click to expand...
Click to collapse
either unlock your bootloader then use flashtool to flash it back or install PC Companion and try it again. When using the PC companion go to support zone then click update phone then chose the highlighted(blue) word "repair" then just follow the prompt
animboo said:
either unlock your bootloader then use flashtool to flash it back or install PC Companion and try it again. When using the PC companion go to support zone then click update phone then chose the highlighted(blue) word "repair" then just follow the prompt
Click to expand...
Click to collapse
thanks for the help man....
but how to connect to PC companion since my phone cant start, it stuck before it can enter to the screen so that i press my phone manually connect with the PC companion? I cant go to that option
sorry for not understanding cos im newbie LOL
lighterlp said:
thanks for the help man....
but how to connect to PC companion since my phone cant start, it stuck before it can enter to the screen so that i press my phone manually connect with the PC companion? I cant go to that option
sorry for not understanding cos im newbie LOL
Click to expand...
Click to collapse
for repairing the arc, it must be turned off, just open up pc companion, then it will instruct you how to connect your arc without turning it on(usually you hold down the back button while plugging it into the usb). Make sure to select the correct phone type when prompted(chose xperia arc). also make sure that your phone is atleast 50% above battery.
Follow the prompt, you cant go wrong.
try it now.
lighterlp said:
how to flash my phone without bootloader unlock?
Click to expand...
Click to collapse
Sorry dude I didnt give up on you just had stuff to do for a bit, looks like your being looked after now
Sent via noahs ark
rustynuts34 said:
Sorry dude I didnt give up on you just had stuff to do for a bit, looks like your being looked after now
Sent via noahs ark
Click to expand...
Click to collapse
just helping out a fellow new arc users. we all have been there, i can understand the panic and frustration(also felt that way when my arc bootloop on me lol).
Hi - Forgive me if I'm saying stuff that you already know...
-Switch your phone OFF. Leave it for 30 seconds or so..
-fire up SEUS.
-Select Arc (LT15 or SO1C depending on which you have..)
-HOLD THE "BACK" KEY down on your phone WHILE you plug the USB cable in.. Keep it pressed until SEUS tells you to release it.
SEUS will then either update your phone, or say that you have the latest software.
If it says that you have the latest software then you will get an option to repair your phone..
Use it!
If SEUS doesn't work do the same with Flashtool... it's like SEUS but not made by SE!
animboo said:
for repairing the arc, it must be turned off, just open up pc companion, then it will instruct you how to connect your arc without turning it on(usually you hold down the back button while plugging it into the usb). Make sure to select the correct phone type when prompted(chose xperia arc). also make sure that your phone is atleast 50% above battery.
Follow the prompt, you cant go wrong.
try it now.
Click to expand...
Click to collapse
Thanks man
im_iceman said:
Hi - Forgive me if I'm saying stuff that you already know...
-Switch your phone OFF. Leave it for 30 seconds or so..
-fire up SEUS.
-Select Arc (LT15 or SO1C depending on which you have..)
-HOLD THE "BACK" KEY down on your phone WHILE you plug the USB cable in.. Keep it pressed until SEUS tells you to release it.
SEUS will then either update your phone, or say that you have the latest software.
If it says that you have the latest software then you will get an option to repair your phone..
Use it!
If SEUS doesn't work do the same with Flashtool... it's like SEUS but not made by SE!
Click to expand...
Click to collapse
i did not see the blue repair words in the 1st place lol thank you very much
rustynuts34 said:
Sorry dude I didnt give up on you just had stuff to do for a bit, looks like your being looked after now
Sent via noahs ark
Click to expand...
Click to collapse
yes, Thanks man
hope you solve your problem with the help we have provided.
Flash tools can also be used on locked bootloader. ~the end~
Hi Guys
I tried to install Ice Bean rom on my device using CWM and when it asked to reboot my device
my phone stuck to Sony Logo and doesn't respond to anything...
my pc doesn't recognize it (as if nothing is connected to my pc)
when i hold back button and press on power button it only blink blue for 1 sec and led goes off
i tried to hold volume down button and press power button and nothing happened
only a vibrate for a sec then stuck to sony logo
battery is charged
i think i bricked it
how to workaround it please help
is there any option to get it back
maybe using Testpoint or i don't know since my phone is not recognized by the pc
please help
before u answer please read (my phone is not recognized by the usb cable) so i guess solutions using usb cables won't help
please help....:fingers-crossed:
Sv: [Q] My sony ericsson arc s is stuck on sony logo and pc doesn't recognize it
yazanallahham said:
Hi Guys
I tried to install Ice Bean rom on my device using CWM and when it asked to reboot my device
my phone stuck to Sony Logo and doesn't respond to anything...
my pc doesn't recognize it (as if nothing is connected to my pc)
when i hold back button and press on power button it only blink blue for 1 sec and led goes off
i tried to hold volume down button and press power button and nothing happened
only a vibrate for a sec then stuck to sony logo
battery is charged
i think i bricked it
how to workaround it please help
is there any option to get it back
maybe using Testpoint or i don't know since my phone is not recognized by the pc
please help
before u answer please read (my phone is not recognized by the usb cable) so i guess solutions using usb cables won't help
please help....:fingers-crossed:
Click to expand...
Click to collapse
Your bootloader was unlocked before you flashed the specific ROM?
Sent from my GT-I9300 using xda app-developers app
Destroyedbeauty said:
Your bootloader was unlocked before you flashed the specific ROM?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yes it was unlocked using the SE method:crying:
yazanallahham said:
Yes it was unlocked using the SE method:crying:
Click to expand...
Click to collapse
I think your CMW is removed.
you have to flash kernel once again.
bjchettri said:
I think your CMW is removed.
you have to flash kernel once again.
Click to expand...
Click to collapse
how to flash it if my pc doesn't recognize my phone?
yazanallahham said:
how to flash it if my pc doesn't recognize my phone?
Click to expand...
Click to collapse
It's simple dude you have to go to bootloader mode. press and hold menu button untill you plugged your device into the pc/laptop.
bjchettri said:
It's simple dude you have to go to bootloader mode. press and hold menu button untill you plugged your device into the pc/laptop.
Click to expand...
Click to collapse
I already tried this and my pc still doesn't recognize it
nothing happens
my phone shows sony logo and vibrates only when i press power button
yazanallahham said:
I already tried this and my pc still doesn't recognize it
nothing happens
my phone shows sony logo and vibrates only when i press power button
Click to expand...
Click to collapse
Then do a fresh installation through the flashtool. flash a official firmware and do the same procedure from the beginning.
bjchettri said:
Then do a fresh installation through the flashtool. flash a official firmware and do the same procedure from the beginning.
Click to expand...
Click to collapse
how can i use flashtool if my pc doesn't recognize my phone which means that the flashtool won't be able to recognize the phone too
?????
yazanallahham said:
how can i use flashtool if my pc doesn't recognize my phone which means that the flashtool won't be able to recognize the phone too
?????
Click to expand...
Click to collapse
Oh, dude flashtool just need your device driver and you have to press back button untill you connect your phone on your pc and it also shown on flashtool which is included in procedure of flashing through flashtool and one thing PC not need to recognized your device because flashtool is the only one method to recover bricked phone. that's it .. if you got confused then please search on google you will find the solution.
bjchettri said:
Oh, dude flashtool just need your device driver and you have to press back button untill you connect your phone on your pc and it also shown on flashtool which is included in procedure of flashing through flashtool and one thing PC not need to recognized your device because flashtool is the only one method to recover bricked phone. that's it .. if you got confused then please search on google you will find the solution.
Click to expand...
Click to collapse
Dear bjchettri
I do appreciate all your efforts
I have to explain the situation just to make things more clear because it looks like you misunderstand me
when I connect my phone (in all modes "Bootloader, Fastboot, normal, recovery..etc) nothing happens on my pc
even in device manager (i'm using Microsoft windows) the system doesn't show any item for a new attached device or an item for an defined attached driver (which used to appear all modes)
the flashtool needs the system to find an attached device to communicate with (usually the attached device name looks like "android phone", SE android or something this (depends on ur phone brand, model)
now since my system doesn't find any device when I connect my mobile then the flashtool won't be able to communicate with my device (even if i tried to boot my device in all modes "bootloader, fastboot, normal, recovery) by holding specific buttons (menu or volumn down or back buttons)
and if you read my question you will see that i was asking if anyone knows any way to connect my phone using testpoints or something like this because i though maybe I can let my pc to recognize my phone using the testpoints method.
I'm not sure but if i could make my phone recognized by the pc then i will have like 10 ways to find the problem and fix it.
Hi yazanallahham
I have the same issue, could not find any solution yet, wondering if you have fixed your fone ?
yazanallahham said:
Dear bjchettri
I do appreciate all your efforts
I have to explain the situation just to make things more clear because it looks like you misunderstand me
when I connect my phone (in all modes "Bootloader, Fastboot, normal, recovery..etc) nothing happens on my pc
even in device manager (i'm using Microsoft windows) the system doesn't show any item for a new attached device or an item for an defined attached driver (which used to appear all modes)
the flashtool needs the system to find an attached device to communicate with (usually the attached device name looks like "android phone", SE android or something this (depends on ur phone brand, model)
now since my system doesn't find any device when I connect my mobile then the flashtool won't be able to communicate with my device (even if i tried to boot my device in all modes "bootloader, fastboot, normal, recovery) by holding specific buttons (menu or volumn down or back buttons)
and if you read my question you will see that i was asking if anyone knows any way to connect my phone using testpoints or something like this because i though maybe I can let my pc to recognize my phone using the testpoints method.
I'm not sure but if i could make my phone recognized by the pc then i will have like 10 ways to find the problem and fix it.
Click to expand...
Click to collapse
Is your bootloader unlocked?If its locked then try to fix it with SEUS not PC Companion downlod SEUS and try.
Sent from my Xperia Arc LT15i using XDA
Hi, i have a problem and i really need help.I put my Xperia SL into bootloop and then i flash X10_V1_BLRelock.ftf from flashtool and now my phone is dead(wont open, just my red light from when i'm trying to charge him).It has been like that for 4 months.
I try SOFT RESET = 1 vibration then let go of buttons and HARD RESET = 3 vibrations then let go but nothing hapens.
If I charge him on computer is show me the red led and after 10 minutes is shows me the green led and it conects on the computer.
The PC is see him but SUS,flashtool and PC companion doesnt recognize him.When i'm conecting him to pc and i open flashtool ,it see him conected in flash mode.
I try to disconnect the battery ribbon from motherboard and reconnect battery ribbon and then to connect USB cable while holding vol +/- but nothing happens.
If you have any questions just ask me.Sorry for my bad english.
iusy98 said:
Hi, i have a problem and i really need help.I put my Xperia SL into bootloop and then i flash X10_V1_BLRelock.ftf from flashtool and now my phone is dead(wont open, just my red light from when i'm trying to charge him).It has been like that for 4 months.
I try SOFT RESET = 1 vibration then let go of buttons and HARD RESET = 3 vibrations then let go but nothing hapens.
If I charge him on computer is show me the red led and after 10 minutes is shows me the green led and it conects on the computer.
The PC is see him but SUS,flashtool and PC companion doesnt recognize him.When i'm conecting him to pc and i open flashtool ,it see him conected in flash mode.
I try to disconnect the battery ribbon from motherboard and reconnect battery ribbon and then to connect USB cable while holding vol +/- but nothing happens.
If you have any questions just ask me.Sorry for my bad english.
Click to expand...
Click to collapse
here http://forum.xda-developers.com/showthread.php?t=1849170 , you can try method mention at the thread
MrGezz said:
here http://forum.xda-developers.com/showthread.php?t=1849170 , you can try method mention at the thread
Click to expand...
Click to collapse
I try this metode when i bricked my phone and it doesnt work.Flashtool doesnt recognize my phone so i cant use it.
iusy98 said:
I try this metode when i bricked my phone and it doesnt work.Flashtool doesnt recognize my phone so i cant use it.
Click to expand...
Click to collapse
does flashtool still recognize your phone as connected in flashmode ??
MrGezz said:
does flashtool still recognize your phone as connected in flashmode ??
Click to expand...
Click to collapse
Flashtool knows that my phone is in flashmode but it doesnt recognize him
iusy98 said:
Flashtool knows that my phone is in flashmode but it doesnt recognize him
Click to expand...
Click to collapse
well then , it should be ok to flash back original firmware using flashtool , cause flashtool still recognize ur phone when connected in flash mode..
MrGezz said:
well then , it should be ok right to flash back original firmware using flashtool , cause flashtool still recognize ur phone when connecting in flash mode..
Click to expand...
Click to collapse
I try that but it doesnt work.It starting the procedure but nothing happens.
iusy98 said:
I try that but it doesnt work.It starting the procedure but nothing happens.
Click to expand...
Click to collapse
have you unlock your bootloader ???
MrGezz said:
have you unlock your bootloader ???
Click to expand...
Click to collapse
Yes
iusy98 said:
Yes
Click to expand...
Click to collapse
flash again stock kernel , then if you use the newest flashtool , try to relock your phone using the option in flashtool , the UB button
iusy98 said:
Yes
Click to expand...
Click to collapse
This is an image of flashtool trying to flash a firmware
MrGezz said:
flash again stock kernel , then if you use the newest flashtool , try to relock your phone using the option in flashtool , the UB button
Click to expand...
Click to collapse
I try to flash again stock kernel but it doesnt work and if this http://forum.xda-developers.com/showthread.php?t=2335555 is the newest version of flashtool i cant fiind the ub button. If UB means bootloader unlock in my version of flashtool it write BLU
iusy98 said:
I try to flash again stock kernel but it doesnt work and if this http://forum.xda-developers.com/showthread.php?t=2335555 is the newest version of flashtool i cant fiind the ub button. If UB means bootloader unlock in my version of flashtool it write BLU
Click to expand...
Click to collapse
I try again to flash kernel but it stop and its doing nothing,like i told i the first place.
I dont know what to do!!
Anyway, thank you for your help
iusy98 said:
I put my Xperia SL into bootloop and then i flash X10_V1_BLRelock.ftf
Click to expand...
Click to collapse
Well that's your problem you've flashed a relock file for the wrong phone, if you look that's for the X10 you need to search for the one for your phone
Sent from my LT26i using xda premium
iusy98 said:
I try to flash again stock kernel but it doesnt work and if this http://forum.xda-developers.com/showthread.php?t=2335555 is the newest version of flashtool i cant fiind the ub button. If UB means bootloader unlock in my version of flashtool it write BLU
Click to expand...
Click to collapse
sorry I meant BLU .. hahaha .. I'm out of idea .. sorry man ,,
I am not able to put my xperia m in flashmode using the flashtool. I tried turning off phone and then holding volume down and inserting the USB cable but nothing happens, there is no led flashing when i do that. Also my phone is not charging while connected to pc when its turned off.
I have every driver installed and i am using the lastest version of flashtool.
Dude you need to hold Vol + button to enter in fastboot.
I have tried both volume up and vol down nothing happens.
Zexter21 said:
I have tried both volume up and vol down nothing happens.
Click to expand...
Click to collapse
Does your phone charge through your charger when it is switched off?
when you connect your phone to pc in normal mode then does it detects??
No my phone doesn't charge with the charger when its turned off. And my pc detects my phone when connected normally.
tabun1994 said:
Does your phone charge through your charger when it is switched off?
Click to expand...
Click to collapse
i have bricked my phone as well.. yes it turns blue after pushing and holding +volume up and it does charge through charger when it is switched off... How do i unbrick my phone if its a semi-brick??
Susheel_22 said:
i have bricked my phone as well.. yes it turns blue after pushing and holding +volume up and it does charge through charger when it is switched off... How do i unbrick my phone if its a semi-brick??
Click to expand...
Click to collapse
If it's a soft brick, you can repair from PCC or flash using flashtool.
This message was brought to you from my Sony Xperia M C1905 using Tapatalk.
Susheel_22 said:
i have bricked my phone as well.. yes it turns blue after pushing and holding +volume up and it does charge through charger when it is switched off... How do i unbrick my phone if its a semi-brick??
Click to expand...
Click to collapse
hard brick means ur phone will not even show a blink and led wont work even in fastboot..
u r having a soft-brick...means u have done something in system folder..
anyway to get phone to work...
download a .ftf of ur latest firmware of ur device[c1904/c1905/c2004/c2005 i think u know urs..] and flashtool...
use flashtool and flash the ftf...
u can see the firmware in xperia m android development...
for flashtool https://unrestrict.li/flashtool
guide here:
http://forum.xda-developers.com/showthread.php?t=2054486
So i have bricked my phone as well? How i am supposed to unbrick it with flashtool. As i already said the problem in the topic, nothing happens while holding vol + and inserting cable.
Zexter21 said:
So i have bricked my phone as well? How i am supposed to unbrick it with flashtool. As i already said the problem in the topic, nothing happens while holding vol + and inserting cable.
Click to expand...
Click to collapse
It must be a hard-brick bro.. You should take it to the repair center..
Zexter21 said:
So i have bricked my phone as well? How i am supposed to unbrick it with flashtool. As i already said the problem in the topic, nothing happens while holding vol + and inserting cable.
Click to expand...
Click to collapse
Lets just analyze your problem:
You launched flashtool and started a flash session.And then a window appeared in flashtool saying that you have to connect your phone in flashmode. You pressed Volume+ and connected your phone.
I want to know what happened next,
Did the window telling you to connect the device in flashmode close down automatically?
Was a pop-pup shown in your pc telling you to choose your phone model?
If these didnt happen, what else did?
I can help you certainly if you can answer these questions.
How do i unbrick my phone? I can't take it to center because i have rooted and unlocked bootloader.
Zexter21 said:
How do i unbrick my phone? I can't take it to center because i have rooted and unlocked bootloader.
Click to expand...
Click to collapse
If it's a hard brick we can do nothing about it.
This message was brought to you from my Sony Xperia M C1905 using Tapatalk.
Finally fixed the problem. I just pulled out the battery and left it for a minute then inserted again. Now everything is working fine.
Hi,
I'm having a similar problem, the phone I'm trying to repair doesn't enter on flashmode, only on fastboot mode, and I need to unlock bootloader and I can't because I can't put it on flashmode.... do you have any suggestions?
Regards
having the same problem my phone neither turn on or enter in flashmode
when i connect it to charge or any there source it just showing blue led... initially i was able to flash but every time i got some error now it just not doing anything please help... i m using c1904 xperia m:crying:
ansebovi said:
hard brick means ur phone will not even show a blink and led wont work even in fastboot..
u r having a soft-brick...means u have done something in system folder..
anyway to get phone to work...
download a .ftf of ur latest firmware of ur device[c1904/c1905/c2004/c2005 i think u know urs..] and flashtool...
use flashtool and flash the ftf...
u can see the firmware in xperia m android development...
for flashtool https://unrestrict.li/flashtool
guide here:
http://forum.xda-developers.com/showthread.php?t=2054486
Click to expand...
Click to collapse
having a similar problem.... all the methods suggested above require the phone to be in flashmode. and flashtool shows error while flashing ftf file.... help please.. thank you
Hello,
I need your help! My phone total bricked,
My computer suddenly shutdown when i flash my phone.
Now no led indication, can't turn on, only detect Qualcomm HS-USB QDLoader 9008 Driver.
Thanks before.
F2-SuccessoR said:
Hello,
I need your help! My phone total bricked,
My computer suddenly shutdown when i flash my phone.
Now no led indication, can't turn on, only detect Qualcomm HS-USB QDLoader 9008 Driver.
Thanks before.
Click to expand...
Click to collapse
try fastboot....see if the led turns blue..[power + vol up for fastboot]
if it turns blue...its not hard brick...flash kernel..then flash rom
How did you flash it? If you were using PC Companion or SUS, I believe the warranty may cover that.
Otherwise, let's see...
According to Google search, the Qualcomm CPU has a built-in USB download mode, which is the "Qualcomm HS-USB QDLoader 9008" that you see. When the device fails to boot it will enter this mode.
Perhaps try to enter flashmode?
Pull out the battery and wait for about a minute or so.
Insert the battery, close the back cover, then hold Volume Down key.
Insert USB cable and wait for the PC to detect it.
If the PC detects it, then flash (again)!
If the PC does not detect it or it detects as "QDLoader" again, perhaps try to pull out the battery and wait longer...
If it keeps entering "QDLoader" then your phone is really hard-bricked. It may still be possible to reflash, but we don't have the drivers and files, so just send it back to warranty, whatever.
* Just by the way, I think you can also enter the "QDLoader" mode by pressing Power + Vol Up + Vol Dn?
ansebovi said:
try fastboot....see if the led turns blue..[power + vol up for fastboot]
if it turns blue...its not hard brick...flash kernel..then flash rom
Click to expand...
Click to collapse
it turns blue for me... But where do i get kernel and rom of xperia m? I have searched on this forum but couldn't figured out yet. Any help would be appreciated
Susheel_22 said:
it turns blue for me... But where do i get kernel and rom of xperia m? I have searched on this forum but couldn't figured out yet. Any help would be appreciated
Click to expand...
Click to collapse
k np...no need of kernel i think...just flash rom..\
rom will be mention as firmware...so please dont confuse...rom and firmware are same...
download a .ftf of ur latest firmware of ur device[c1904/c1905/c2004/c2005 i think u know urs..] and flashtool...
use flashtool and flash the ftf...
u can see the firmware in xperia m android development...
for flashtool https://unrestrict.li/flashtool
guide here...
http://forum.xda-developers.com/showthread.php?t=2054486
alvinhochun said:
How did you flash it? If you were using PC Companion or SUS, I believe the warranty may cover that.
Otherwise, let's see...
According to Google search, the Qualcomm CPU has a built-in USB download mode, which is the "Qualcomm HS-USB QDLoader 9008" that you see. When the device fails to boot it will enter this mode.
Perhaps try to enter flashmode?
Pull out the battery and wait for about a minute or so.
Insert the battery, close the back cover, then hold Volume Down key.
Insert USB cable and wait for the PC to detect it.
If the PC detects it, then flash (again)!
If the PC does not detect it or it detects as "QDLoader" again, perhaps try to pull out the battery and wait longer...
If it keeps entering "QDLoader" then your phone is really hard-bricked. It may still be possible to reflash, but we don't have the drivers and files, so just send it back to warranty, whatever.
* Just by the way, I think you can also enter the "QDLoader" mode by pressing Power + Vol Up + Vol Dn?
Click to expand...
Click to collapse
Thnx all for your answer
I was tried your solution but still no solve yet. Computer only show Qualcomm HS-USB QDLoader 9008 driver. No more indication or led whatever.
I also can't entering to fastboot mode or adb mode. All button look no function.
Please more help. thnx
Sorry for my bad english
F2-SuccessoR said:
Thnx all for your answer
I was tried your solution but still no solve yet. Computer only show Qualcomm HS-USB QDLoader 9008 driver. No more indication or led whatever.
I also can't entering to fastboot mode or adb mode. All button look no function.
Please more help. thnx
Sorry for my bad english
Click to expand...
Click to collapse
i can see these 2 option for u//..as far as i know...
http://forum.xda-developers.com/showthread.php?t=2136738
http://mobiletechvideos.mybigcommerce.com/
but i cant assure u that it will unbrick..mostly they said it works...so i gave them to u...
its very risky to use both option...
its ur decision...use any option...or dont use..
or u can take ur phone to sony..they may fix it...
hope u will unbrick ur phone :fingers-crossed:
Hi I got a similar case :/ I was partitioning my sd card with Aparted but as soon as I turned off my Xperia M to reboot it it got bricked and hasn't been working since. Cant get it to into flashboot mode or flashmode to flash the original firmware. No lights or buttons are working although when I connect it to my pc it detects it in usb but not as the phone itself. Is there anyway at all I can fix this. Any help will be greatly appreciated.
For everyone with the brick situation, do you have a locked bootloader?
I know one user said they tried the volume down+insert USB cable into the computer, you did try this with PC Companion ready to repair the software?
Sony Update Service restores the bootloader on locked bootloader phones, true? If the stock bootloader is corrupt somehow, SUS could repair it.
SharpnShiny said:
For everyone with the brick situation, do you have a locked bootloader?
I know one user said they tried the volume down+insert USB cable into the computer, you did try this with PC Companion ready to repair the software?
Sony Update Service restores the bootloader on locked bootloader phones, true? If the stock bootloader is corrupt somehow, SUS could repair it.
Click to expand...
Click to collapse
My bootloader is unlocked!!
Sent from my GT-P3110 using XDA Premium 4 mobile app
ansebovi said:
try fastboot....see if the led turns blue..[power + vol up for fastboot]
if it turns blue...its not hard brick...flash kernel..then flash rom
Click to expand...
Click to collapse
I am having the same issues as well, but with my Xperia V. It doesn't come up at all. It only shows the green LED when I try to fastboot or try flash mode. Please help me to resolve. I can't stand the wait for waranty to resolve. How can I still flash custom ROM?
samokel said:
I am having the same issues as well, but with my Xperia V. It doesn't come up at all. It only shows the green LED when I try to fastboot or try flash mode. Please help me to resolve. I can't stand the wait for waranty to resolve. How can I still flash custom ROM?
Click to expand...
Click to collapse
put harge for 2-3 hrs,then download ftf of v....then try to flash using flashmode[hold vol down + power]
ansebovi said:
put harge for 2-3 hrs,then download ftf of v....then try to flash using flashmode[hold vol down + power]
Click to expand...
Click to collapse
ansebovi, thanks so much. You can't imagine how much I've trouble seeking help. My phone is now up, with the stock ROM. Can I flash a custom ROM with Flashtool?
samokel said:
ansebovi, thanks so much. You can't imagine how much I've trouble seeking help. My phone is now up, with the stock ROM. Can I flash a custom ROM with Flashtool?
Click to expand...
Click to collapse
u need to unlock bootloader first...then u can...
Hi The problem is that the phone c2005 flash mode is not the case for the moment the green light turns on and then turns off and the phone is in a state of zeus mode.
samokel said:
ansebovi, thanks so much. You can't imagine how much I've trouble seeking help. My phone is now up, with the stock ROM. Can I flash a custom ROM with Flashtool?
Click to expand...
Click to collapse
Root > Unlock your Bootloader > Flash Custom ROM from flashtool or from CWM recovery mode
This qdloader is how Sony load the phone with software in the first place. Qualcomm's version of flashmode. Afaik only OEM have access to the software for this.
Sent from my C1905 using XDA Free mobile app
plz help me
unbrick xperia m dual
hey buddy..here is the 100 % working solution
dowload these first
1. ftf file for xperia m dual c2004 - http://forum.xda-developers.com/showpost.php?p=53348374&postcount=1
2. xperia flash tool - http://sd-64701.dedibox.fr/page/news/flashtool-0.9.16.0-windows.exe-download
procedure
1) install the xperia flash tool
2) extract the 1st part of dwonloaded ftf using winzip. It will automatically extract all the other into a single file.
3) Go to the installed location of flash tool.Click divers and install necessary drivers.
4) Now run the flashtool. Click on flash icon and choose flashmode.
5) browse the ftf file u extracted and click on flash
6) now the files will be prepared for flash. A pop up appears and asks u to connect the phone.
7) turn off the device . PRESS THE VOLUME DOWN BUTTON AND THEN CONNECT TO THE PC USING USB CABLE.
8) Flashing starts to proceed.
9) After flash is complete unplug the device . Remove the battery . After few minutes insert the battery and turn on the device
10) intitial boot takes time.
:good::good:
Guys, i need help too!!!! :'(
I tried to swap my internal and my external memory by using the mothod on a video on youtube called "how to swap xperia m /dual on 4.3".
And here's what happened after I rebooted: My xperia M is stuck on the boot screen (it goes till the multicoloured wave), and then it starts up again and again and again!!!! Also, I can't get my phone to connect in flash mode when I connect it to my pc so as to install the official ftf file I've downloaded, becase when I try to connect it with my pc, the phone's led just turns up red, then green (for just some seconds), and then goes back to the booting screen!!!! I have an Xperia M single sim, rooted, with a locked bootloader!! PLEASE HELP ME, I DON'T KNOW WHAT TO DO ANYMORE!!!!! :'(