Hello all,
I have a Huawei G520-0000 bought from China and tried to follow this guide :
http://forum.xda-developers.com/showthread.php?t=2343580
I successfully rooted the device but when I tried to copy the following files :
OneTime Initializer.apk
GoogleLoginService.apk
Google Services Framework.apk
Setup Wizard.apk
Gmail.apk
in root\system\apps and then rebooted, android is now completely bugged.
I'm stuck at the "Welcome" screen and whenever I try to do something else, I have the folowing error "The Setup wizard has stopped" (My device is in french so sorry if it's not completely accurate).
I cannot start in recovery mode and I cannot modify the debug USB option...
Any ideas about what should be the next step ?
Thanks !
Brick Huawei G520-0000
Recently I flashed Huawei G520-0000 using CWM recovery with custom ROM I’ve got it from the internet after too many failure times trying to install official firmwares from Huawei support area (it starts unpack in the step 1 then after a while says failure, I tried many firmwares UPDATE.APP, but it was the same thing, so ended me up using custom ROM), after finish flashing the phone with this custom ROM ended up with starting the phone with green background and blue, red squares in center of the screen.
Now the phone stuck at this case and doesn’t continue booting up only frozen and if I rolled the battery out for 5 seconds then put it back and hold volume up and down in the same time the phone goes to the purple screen if there is SD card (dload, UPDATE.APP is located on the SD), it shows progress and the progress stuck at 35%
Any suggestion will be strongly appreciated
Problem resolved
Related
hi, this is my first post....
i have spent the last few days searching this site with no luck, so here goes...
i have a motorola defy android 2.1(stock rom)
it was running great (rooted and overclocked at 1200) until i downloaded a freezing program (freezes orig phone apps, telstra ect)
anyhow i turned off my phone and then when i turned it back on i had no home screen??? (so couldnt access my apps,settings,msgs,calls, nothing)
i could slide the unlock across but after that it was just black with the status bar at the top....
i have done a hard reset (hold volume down and turn on, then wipe data/factory reset)
now my stupid motoblur acc will not let me log in, or create a new account (i have been successful loging into the motoblur website, just not on my phone), it loads almost to the end of the progress bar, then just sits there and does nothing at all, i even left it over night!!!
i have installed these files, in the hope of flashing a new rom (2.3 or 2.3 would be sweet)
Motodrivers131
RSD Lite 4.9
i installed rsd first, and could see my phone (in download mode) but every time i tried to flash a .sbf file i got the message "Failed flashing process. Unable to retrieve initialization values from INI file. (0x7029); phone connected" so i installed Motodrivers131, and now my phone wont even show up in rsd???
im in melbourne, victoria, australia 3133...
im going insane here, any help would be very appreciated...
james
Bump
bump
bump
Uninstall everything, reboot the pc, install Motorola Drivers, install rsd, remove the battery, press and hold VOL UP and put the battery again. Open RSD and try to see your phone now. If it fails, try to press the power button (continue holding VOL UP).
If everything fails, maybe you are out of battery, and the only thing to do is mcgyver trick (see wiki).
ok, i have managed to get into google while in the motoblur sign in thingy, and rooted my phone and used clockwork to flash an update from my sd card
2 problems tho, first one is that im in australia and ive flashed t-mobile 2.2 (usa)
and the second is that everytime i put an sd card into the phone it begins to mount the sd card, then instantly says "sd card is safe to remove" i have tried formatting it on the phone but it says to remove it before i get a chance..... (i have tried 2 diff cards) and have wiped them on my computer!
this is rather annoying as i cant flash it with blueginger like i wanted to, or use a fair few apps or the camera without the sd card present????
any thoughts?
Maybe the drivers are corrupted?
Are you using a T-Mo US Defy unit or an unbranded one?
nah my defy is a telstra branded one from australia......
there has to be a way around this problem...
Hi,
I have a Samsung Galaxy S Plus here which is almost brand new and has only been used for some phone/texts/emails so far.
I connected it to a PC running Samsung Kies and it told me there was a firmware update available for this phone, so i clicked ok and had it install.
During the installation, at 22%, everything freezes and locks up, it remained at 22% for 45 minutes until (after some googling) i was recommended to just turn it off / reboot it.
After rebooting, i constantly get this icon on the screen :
Copy & paste the following in a web browser (as I'm not allowed to place a link or picture apparently)... : img267.imageshack.us/img267/930/fotofg.jpg
I tried removing the battery for 10 seconds and then boot it up again - same screen.
And it doesn't matter if its connected to the PC or not, its always that screen.
And when it IS connected to the pc, samsung Kies shows the 'connecting' screen but it never actually connects.
What do I do ?
How is it possible that someone's phone gets locked/frozen for simply trying to update ?!
orangewall said:
Hi,
I have a Samsung Galaxy S Plus here which is almost brand new and has only been used for some phone/texts/emails so far.
I connected it to a PC running Samsung Kies and it told me there was a firmware update available for this phone, so i clicked ok and had it install.
During the installation, at 22%, everything freezes and locks up, it remained at 22% for 45 minutes until (after some googling) i was recommended to just turn it off / reboot it.
After rebooting, i constantly get this icon on the screen :
Copy & paste the following in a web browser (as I'm not allowed to place a link or picture apparently)... : img267.imageshack.us/img267/930/fotofg.jpg
I tried removing the battery for 10 seconds and then boot it up again - same screen.
And it doesn't matter if its connected to the PC or not, its always that screen.
And when it IS connected to the pc, samsung Kies shows the 'connecting' screen but it never actually connects.
What do I do ?
How is it possible that someone's phone gets locked/frozen for simply trying to update ?!
Click to expand...
Click to collapse
have the same problem ... did u solving ?
XXX.hard-reset.com/samsung-i9000-galaxy-s-hard-reset.html
Copy and paste into address bar not allowed to post links. Substitute xxx for www
Custom solution
Hello,
It's a big problem, but maybe can you blame samsung? However, I don't know if you have CMW, but try to boot that and than install custom rom (a zip rom). After that you can install original firmware.
If that doesn't work find a rom that works with odin, boot in download mode and install that rom, after that install original firmware.
Similar thing append to me but wile using odin i got the same screen.
What i did was connect it gain to the pc, odin detected it and was able to flash the rom.
It was pretty scary i assure you.
My advise is if the phone is brand new take it to your dealer a let them sort this out as it was not your fault at all.
If it's a brand new phone I'd use Samsung's warranty or maybe even return it.
Hey guys, I would really use your advice on this.
I have been following steps posted in this thread http://forum.xda-developers.com/show....php?t=2609560
I managed to reach point number 8, but when I try to restart my phone, it won't show any "FOTA set of red messages" neither Badadroid logo, just regular Bada 2 gets succesfully loaded. I have no idea what am I doing wrong.
So far I have been trying 2 Roms:
http://www.file-upload.net/download-...eroff.zip.html
https://yadi.sk/d/C1iIRo1tSVyVF
With both of them I copied related zImage to phone root directory and the whole zip to root directory of SD card.
Then I flashed BOOTFILES and FOTA using Multiloader, both succesfully (using this tutorial http://forum.xda-developers.com/show....php?t=1732287)
https://yadi.sk/d/Yz7_dfpkC6TkC
https://yadi.sk/d/W4RjnjQRC6TfP
It still doesn't work, when I restart, just regular Bada loads. What should I do? Please help me, I am kind of new with this. Thank you in advance!
EDIT: OK, so I figured out that you have to hold END CALL + VOLUME UP to reach CWM. According to tutorial, Badadroid logo should remain on the screen for like 5 minutes, but it's just a matter of seconds till I reach CWM. Also at the beginning of the installation I get this message: can't mount /cache/recovery/last install. Otherwise installation finishes succesfully. But when I restart the phone, it's Bada again. Pls, what to do?
CatBug
previous problem,
my device is nexus7 2013 wifi edition, and the system is 6.0.1
some days ago i have stopped few google services, then the device begin to reboot again and again.
detail process, power on then i can see the google mark, after that is the ring animation, could be continue for 3 to 4 mins,(could get in to system no more than 30s before), then begin to install the update files, then display ready to login to system. after that skip to the ring animation again, then repeat this process. can not get in to the system at last.
i have tried some methods as below,
1 safe mode , can not get in to it, will go to ring animation again at last
2 recovery mode, it need to flash the device, but i need to backup my data
3 my device is locked, and no rooted
------------------------------------------------------------------here is the split line
then i knew it's impossible to do that, so i try to flash rom myself
i use the software called Perfect brush, with the official rom, after the process begin to flash, it go to 5% of the process, then go to 100% immediately， and completed.
then i start the machine, but it continue to skip to the ring animation after ready to login to system, the same as before.
so it means flash failed?
then how should i do ? to login to the system normally.
thanks everyone. please help me
My daughter has been using this phone, but never backed her photos up. Now it won't boot and she is worried they are lost forever. I've been trying to help, but only seem to make things worse.
1. She never enabled USB debugging, or rooted it
2. She could not tell me whether she had allowed the OTA upgrades.
3. It got into a reboot loop a few days ago. It would start to boot, then say it was optimising a random number of apps (anything between 90 and 158) and then start over. Wileyfox tech support told me that this was due to an incompatibility between Cyanogen and the latest Facebook Update.
4. They sent me a link to the FOTA files with instructions how to progressively upgrade to Android 7 (TOS111B)
5. They couldn't tell me how to determine whether it was running CM12 or CM13 (I now realise that I could have looked at the log files in the recovery partition)
6. I therefore assumed that it was running CM12. I used their instructions to go into recovery and manually update from SD card to ZNH0EAS2NH from there to ZNH2KAS7EB and then to TOS111B
7. Fatally I did not reboot between updates. At the end I had the Wileyfox splash screen black on white, and then got an animation with it red on white. It then got stuck.
8. I then tried using fastboot to go back to the original version of the OS so I could start over. I found the fastboot image and I flashed the boot and system partitions.
9. Now on boot it either gets stuck on the black on white boot screen, or it displays it for a second and then turns off.
Can anyone help me? - I think my daughter will have a nervous breakdown if I don't find a way of recovering her photos. Recovering the photos is more important than unbricking the phone.
jerrytaff said:
My daughter has been using this phone, but never backed her photos up. Now it won't boot and she is worried they are lost forever. I've been trying to help, but only seem to make things worse.
1. She never enabled USB debugging, or rooted it
2. She could not tell me whether she had allowed the OTA upgrades.
3. It got into a reboot loop a few days ago. It would start to boot, then say it was optimising a random number of apps (anything between 90 and 158) and then start over. Wileyfox tech support told me that this was due to an incompatibility between Cyanogen and the latest Facebook Update.
4. They sent me a link to the FOTA files with instructions how to progressively upgrade to Android 7 (TOS111B)
5. They couldn't tell me how to determine whether it was running CM12 or CM13 (I now realise that I could have looked at the log files in the recovery partition)
6. I therefore assumed that it was running CM12. I used their instructions to go into recovery and manually update from SD card to ZNH0EAS2NH from there to ZNH2KAS7EB and then to TOS111B
7. Fatally I did not reboot between updates. At the end I had the Wileyfox splash screen black on white, and then got an animation with it red on white. It then got stuck.
8. I then tried using fastboot to go back to the original version of the OS so I could start over. I found the fastboot image and I flashed the boot and system partitions.
9. Now on boot it either gets stuck on the black on white boot screen, or it displays it for a second and then turns off.
Can anyone help me? - I think my daughter will have a nervous breakdown if I don't find a way of recovering her photos. Recovering the photos is more important than unbricking the phone.
Click to expand...
Click to collapse
Since posting this I have had a partial success. A more complete set of fastboot flashing using the TOS111B fastboot images has got me to a phone that boots. Many of the apps work. However...
a) I get an "unfortunately the process com.android.phone has stopped" appearing almost as fast as I can close the app making it very difficult to get anything off the phone. However, I did manage to set up a google sync to upload the photos.
b) my daughter now tells me that her SMS's are vital.... and the messaging app says " getting message" then closes down
c) I cannot enable developer setting to enable usb debug mode. I can get into the phone status page under settings. Repeated tapping on the android version brings up the nougat splash screen, but the 7 taps (or 700 for that matter) on build number does nothing whatsoever.
Does anyone have any ideas how to recover to a fully working system without doing a factory reset?
I suspect that the sms database would have gone when the cache was cleared. Can anyone confirm that to be the case before I spend any more time trying to recover them?
Hi Jerry ,
Exactly the same problem here. Could you tell me where you've found the TOS111B fastboot images?
Thx!
Have you tried booting into safe mode?
I think you do that by pressing and holding the volume down down button during reboot.
If you can manage that you may be able to dissable the apps that are causing the crash.