Related
I hope that this post is in the correct forum section - apologies if not and apologies if there is already a thread on this subject (I did try searching but nothing that provided a link to a RUU).
Here's what I've done:
Flashed a custom ROM to my UK O2 HTC One X
Then tried to restore it to stock without taking a Clockwork recovery backup (deleted all caches and storage in the process)
Tried to flash with stock RUU found online (1.26.206.2) but RUU software throws an error as the exisiting f/w is 1.29.206.11 and this is what it is expecting
I can access the HOX through fastboot to lock and unlock the device but I cannot see the "SD card" to copy over a custom ROM to at least get some life into the thing (it just sits at the white HTC loading screen until the battery dies).
Ideally I want to return the thing to stock (if anyone has a O2 UK 1.29.206.11 RUU) but failing that is there anyway to get a custom ROM on there (for installation with CWM) without my PC (Windows 7 or Mac available) seeing the HOX storage?
Thanks for reading and any help you can pass on.
brlauk_HOX said:
I hope that this post is in the correct forum section - apologies if not and apologies if there is already a thread on this subject (I did try searching but nothing that provided a link to a RUU).
Here's what I've done:
Flashed a custom ROM to my UK O2 HTC One X
Then tried to restore it to stock without taking a Clockwork recovery backup (deleted all caches and storage in the process)
Tried to flash with stock RUU found online (1.26.206.2) but RUU software throws an error as the exisiting f/w is 1.29.206.11 and this is what it is expecting
I can access the HOX through fastboot to lock and unlock the device but I cannot see the "SD card" to copy over a custom ROM to at least get some life into the thing (it just sits at the white HTC loading screen until the battery dies).
Ideally I want to return the thing to stock (if anyone has a O2 UK 1.29.206.11 RUU) but failing that is there anyway to get a custom ROM on there (for installation with CWM) without my PC (Windows 7 or Mac available) seeing the HOX storage?
Thanks for reading and any help you can pass on.
Click to expand...
Click to collapse
if you can get into to CWM there is an option to mount sd in there somewhere, if you can't get into it maybe try re-flashing it
seanicca said:
if you can get into to CWM there is an option to mount sd in there somewhere, if you can't get into it maybe try re-flashing it
Click to expand...
Click to collapse
Thanks for the reply - I tried that but CWM returns an error when trying to mount the SD card.
Tried flashing 1.26.206.2 through fast boot?
brlauk_HOX said:
Thanks for the reply - I tried that but CWM returns an error when trying to mount the SD card.
Click to expand...
Click to collapse
Cwm 5.8.4.0 allows sd mounting in recovery, try flashing that
sent from my One X using xda venom premium
xmoo said:
Tried flashing 1.26.206.2 through fast boot?
Click to expand...
Click to collapse
DO you mean extracting the 2 img files from the RUU zip and running from fastboot command prompt? If so, the second img file returns a [0000006] error.
brlauk_HOX said:
DO you mean extracting the 2 img files from the RUU zip and running from fastboot command prompt? If so, the second img file returns a [0000006] error.
Click to expand...
Click to collapse
Get the rom.zip and
adb reboot oem-78
fastboot flash zip rom.zip
http://forum.xda-developers.com/showthread.php?p=28665193
Sent from my HTC One X
I'm looking for this Nandroid too but all the links I've found are broken. Can anyone help out? Preferably a CWM backup if at all possible.
brlauk_HOX said:
I hope that this post is in the correct forum section - apologies if not and apologies if there is already a thread on this subject (I did try searching but nothing that provided a link to a RUU).
Here's what I've done:
Flashed a custom ROM to my UK O2 HTC One X
Then tried to restore it to stock without taking a Clockwork recovery backup (deleted all caches and storage in the process)
Tried to flash with stock RUU found online (1.26.206.2) but RUU software throws an error as the exisiting f/w is 1.29.206.11 and this is what it is expecting
I can access the HOX through fastboot to lock and unlock the device but I cannot see the "SD card" to copy over a custom ROM to at least get some life into the thing (it just sits at the white HTC loading screen until the battery dies).
Ideally I want to return the thing to stock (if anyone has a O2 UK 1.29.206.11 RUU) but failing that is there anyway to get a custom ROM on there (for installation with CWM) without my PC (Windows 7 or Mac available) seeing the HOX storage?
Thanks for reading and any help you can pass on.
Click to expand...
Click to collapse
blocka said:
I'm looking for this Nandroid too but all the links I've found are broken. Can anyone help out? Preferably a CWM backup if at all possible.
Click to expand...
Click to collapse
Install directly the RUU 1.26.206.2
Thant said:
Install directly the RUU 1.26.206.2
Click to expand...
Click to collapse
thank you appreciate the link
Thant said:
Install directly the RUU 1.26.206.2
Click to expand...
Click to collapse
BTW my HBOOT version is 0.96, this won't cause any issues will it when it comes to running the RUU?
blocka said:
BTW my HBOOT version is 0.96, this won't cause any issues will it when it comes to running the RUU?
Click to expand...
Click to collapse
Please post the result from command fastboot getvar all and delete IMEI and S/N
Thant said:
Please post the result from command fastboot getvar all and delete IMEI and S/N
Click to expand...
Click to collapse
fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 0.96.0000
INFOversion-baseband: None
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.29.206.11
INFOserialno: xxxxxxxxxxxxx
INFOimei: xxxxxxxxxxxxxxx
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: None
INFObattery-status: good
INFObattery-voltage: 4148mV
INFOdevpower: 100
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 1.172s
fastboot oem readcid
... INFODEBUG: cid: O2___001
blocka said:
fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 0.96.0000
INFOversion-baseband: None
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.29.206.11
INFOserialno: xxxxxxxxxxxxx
INFOimei: xxxxxxxxxxxxxxx
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: None
INFObattery-status: good
INFObattery-voltage: 4148mV
INFOdevpower: 100
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 1.172s
fastboot oem readcid
... INFODEBUG: cid: O2___001
Click to expand...
Click to collapse
Ok in this case Download RUU 2.17.206.2 and run the RUU the RUU 1.26.206.2 will not work for you. Lock the bootloader and run the RUU
Thant said:
Ok in this case Download RUU 2.17.207.2 and run the RUU the RUU 1.267.206.2 will not work for you.
Click to expand...
Click to collapse
Cheers! can you explain to a noob why this is the case? BTW the file in the link is only 15MB, is this the correct file size?
blocka said:
Cheers! can you explain to a noob why this is the case? BTW the file in the link is only 15MB, is this the correct file size?
Click to expand...
Click to collapse
Ok this is bad this RUU is not full must be 500-600 Mb= Surch from google to download the RUU 2.17.206.2 for HTC one X and install this in Android RUU files store is not the full. The case is you have 1.29.206.11 witch is newer vrom 1.26.206.2 and if you try to install it you will receive error wrong RUU.
EDIT: I think you will not find this RUU surch here in xda for nandroid backup for 1.29.206.11 and restor it and dont forget to restor the stock recovery too.
Thant said:
Ok this is bad this RUU is not full must be 500-600 Mb= Surch from google to download the RUU 2.17.206.2 for HTC one X and install this in Android RUU files store is not the full. The case is you have 1.29.206.11 witch is newer vrom 1.26.206.2 and if you try to install it you will receive error wrong RUU.
EDIT: I think you will not find this RUU surch here in xda for nandroid backup for 1.29.206.11 and restor it and dont forget to restor the stock recovery too.
Click to expand...
Click to collapse
Thanks for your help, appreciate it!
I've got the RUU you suggested from HERE
Now to apply this RUU all I need to do is run the file (exe) and follow the bouncing ball?
Then once flashed (back to stock), to install a custom recovery (so I can do a nandroid) is unlock the bootloader, install the recovery, and take the nandroid backup. To get the OTA Update(s), I'll need to relock the bootloader, do the automated system updater, redo nandroid, then onto a custom recovery once HBOOT has been updated via the OTA process?
EDIT: Take a nandroid backup first of course
blocka said:
Thanks for your help, appreciate it!
I've got the RUU you suggested from HERE
Now to apply this RUU all I need to do is run the file (exe) and follow the bouncing ball?
Then once flashed (back to stock), to install a custom recovery (so I can do a nandroid) is unlock the bootloader, install the recovery, and take the nandroid backup. To get the OTA Update(s), I'll need to relock the bootloader, do the automated system updater, redo nandroid, then onto a custom recovery once HBOOT has been updated via the OTA process?
EDIT: Take a nandroid backup first of course
Click to expand...
Click to collapse
NO You can't receive the OTA via custom recovery you need ctock recovery and stock rom unrooted
1) Lock your bootloader
2) Run the RUU
3) Apllay all update to 4.x.206.x 4.2.2 JB
4) Unlock your Bootloader
5) Install Philz custom recovery
6) Do a Nandroid Backup on 4.2.2.JB . Save on secure plase it is better to have 2 copies on nandroid on different place
7) If you wont Install custom rom or root the stock it is your decision and don't forget to flash the boot.img if you install custom rom
Thant said:
Ok in this case Download RUU 2.17.207.2 and run the RUU the RUU 1.26.206.2 will not work for you. Lock the bootloader and run the RUU
Click to expand...
Click to collapse
Hi - was just about to go through the process of reverting to stock when I noticed the RUU and link you suggested
Download RUU 2.17.207.2
Click to expand...
Click to collapse
actually is linked to RUU_ENDEAVOR_U_ICS_40_S_O2_UK_2.17.206.2_Radio_2.1204.135.20_release_275038_signed.exe.
So before I start I need to find out exactly what RUU I need, either 2.17.206.2 or 2.17.207.2.
Thanks for ya help .
Please who has a RUU for the HTC X, with Telekom cid 101 and HBOOT version 1:39?ore can i downgrade ?
software version on the device version 3.14.111.28 radio bootloader radio-5.1204.163U1.30
Put the outcome of
Fastboot getvar version-main
Fasrboot oem readcid
Answer
version-main: 3.14.111.28
Fastboot Oem Readcid T-Mob 101
Hboot Version 1.39.000
-------------------------------------------------------------------
c:\adb>fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 1.39.0000
INFOversion-baseband: 5.1204.163U1.30
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.20.401.1 PLEASE READ NEW VERSION
INFOserialno:
INFOimei:
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: T-MOB101
INFObattery-status: good
INFObattery-voltage: 3692mV
INFOdevpower: 54
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
No ruu available for you. Only a stock backup to restore
http://bugsylawson.com/files/file/328-cwm-nandroid-backup-cid-t-mob101-31411127/
Thanks
Thank you very much im restore with this backup with cwm.
moment pls.
ore can i change miy cid ore downgrade hboot?
i have installes 3.20.401.1 i habe no tcom branding now =) have you a ruu pls for this?
INFOversion-main: 3.20.401.1 PLEASE READ NEW VERSION
No downgrade is impossible.
MD5 mismatch is to be solved ....hold on
Its in the OP of this thread
http://forum.xda-developers.com/showthread.php?t=1975140
now new version
thanks very much can you give me a ruu for this version pls?
i have installes 3.20.401.1 i habe no tcom branding now =) have you a ruu pls for this?
INFOversion-main: 3.20.401.1 PLEASE READ NEW VERSION
why i can update 3.20 version with no branding=)?
i think 3.14 is the last?
pls help and thx for help before this
Huh ! You can't upgrade a phone if the software isn't for your phone. You can't update to higher versions with a 3.20.401 stock rom when the original software should be 3.14.111 ???
answer
i have a nandroid backup nandroid_3.20.401.1
i restore my system with this
is the software version not from the system
crowni said:
i have a nandroid backup nandroid_3.20.401.1
i restore my system with this
Click to expand...
Click to collapse
Yeah but that's not the official one that came with the phone !
The 3.20.401. Is a custom rom or nandroid backup from someone else.
You can't update a 3.14.111 tmob branded phone with a 3.20.401. Rom !
answer
Mr Hofs said:
Yeah but that's not the official one that came with the phone !
The 3.20.401. Is a custom rom or nandroid backup from someone else.
You can't update a 3.14.111 tmob branded phone with a 3.20.401. Rom !
Click to expand...
Click to collapse
i bot my phone i have no branding its original nandroid backup from 3.20
Then it was rooted and rommed already. The original phones software is the one that comes out of the 2 commands i gave you earlier !
The software you have on it 3.20.401 (base of the custom rom) but its not the official one that came with the phone out of the box !
To get back to stock you have 2 options
1: keep a 3.20 clean stock rom on it (but impossible to install official updates)
2: install a nandroid backup for your official main and cid number + stock recovery (able to install official updates)
Choice is yours
Thank you.
Mr Hofs said:
Then it was rooted and rommed already. The original phones software is the one that comes out of the 2 commands i gave you earlier !
The software you have on it 3.20.401 (base of the custom rom) but its not the official one that came with the phone out of the box !
To get back to stock you have 2 options
1: keep a 3.20 clean stock rom on it (but impossible to install official updates)
2: install a nandroid backup for your official main and cid number + stock recovery (able to install official updates)
ok thank you very very much for your help i take step 2 =)
Click to expand...
Click to collapse
Cool !
The stock recovery you need after all restoring is this one
http://db.tt/pO3jumMa
Please Help Red triangle system update.
Good day
I have stock, boot flashed oem lock system performed via TWRP backup wiederhergellt.Nun the Systemupodate invites the phone starts to load the update .. at about 20% it breaks off and you will see a red triangle.
Can you please help with that I can update again via system update [COLOR = "Silver"]
This is the update 3.14.111.28
The Cid is Tmob 101
hboot version 1.39.000
but nothing helped factory reset via fastboot .. systen and fastboot
Red Triangle Upodate Error after Stock restore
Systemupdate Red Triangle no Update Work PLs help
but nothing helped factory reset via fastboot .. systen and fastboot[/QUOTE]Previous sequence.
Viber 3.71 rom with CWM with Alexkernel
flashed cwm
created cwmbackup
in the folder, the restore pack from here Tmob 101 3:14
copied
in cwm factory reset / wipe dalvik / cache
fastboot boot img flashed / erase cache
System start again and ausgehsclatet
stock recovery flashed 3.14 / erase cache
oem lock
system update loads to 20% then the red triangle.
Red Triangle
Systemupdate 3.14.111.28 Red Triangle not Update Work PLs help
Viber 3.71 rom with CWM with Alexkernel
flashed cwm
created cwmbackup
in the folder, the restore pack from here Tmob 101 3:14
copied
in cwm factory reset / wipe dalvik / cache
fastboot boot img flashed / erase cache
System start again and ausgehsclatet
stock recovery flashed 3.14 / erase cache
oem lock
system update loads to 20% then the red triangle.[/QUOTE]
crowni said:
Systemupdate 3.14.111.28 Red Triangle not Update Work PLs help
Viber 3.71 rom with CWM with Alexkernel
flashed cwm
created cwmbackup
in the folder, the restore pack from here Tmob 101 3:14
copied
in cwm factory reset / wipe dalvik / cache
fastboot boot img flashed / erase cache
System start again and ausgehsclatet
stock recovery flashed 3.14 / erase cache
oem lock
system update loads to 20% then the red triangle.
Click to expand...
Click to collapse
[/QUOTE]
What's the output of
fastboot getvar version-main
Sent from my HTC One X using Tapatalk 4 Beta
asnwer
fastboot getvar version-main 3.14.111.28
flase image ore stock recovery?
Try this
Make a full wipe
Factory reset
Wipe cache partition
Wipe dalvik cache
Format cache, system, data
Then restore the nandroid.
Then flash back the stock recovery and do not relock the bootloader.
---------- Post added at 10:57 PM ---------- Previous post was at 10:55 PM ----------
What's the output of
fastboot getvar version-main
Sent from my HTC One X using Tapatalk 4 Beta[/QUOTE]
That was on page 1 already matey
I have rebuilt my HTC one X and now it seems stable using onedroid.
I have tried other roms but had trouble with stability, keyboard or Microphone.
I have:-
FActory reset
flash boot.img (extractedfrom the zip file)
erase cache
Format system/ data everything.
full rom wipe with Philz
Installed zip
Then it asks if I want to unlock or root or something? cant quiet rememberI replied yes.
reboot.
power down
reboot.
Would installing firmware help?
If so which one. (PS the links were down)
And what order.
e.g.
relock (will that mean I can no longer unlock again?)
flash firmware
then boot.img
INFOversion: 0.5a
INFOversion-bootloader: 1.39.0000
INFOversion-baseband:
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOserialno: HT243W120604
INFOimei: 359188048330971
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: HTC__001
Thanks
Fish
Keep your bootloader unlocked, easyer to fix things if needed
1: flash the boot.img of the rom
2: enter recovery and
- factory reset (full reset)
- wipe cache partition
- ADVANCED - wipe dalvik cache
- MOUNTS & STORAGE - format cache, data and system
3: then install the rom.zip and make sure you dont mis a step there ! and please check the MD5 hash number of the downloaded rom to make sure its not a bad download.
hboot on 1.39 should be fine. All roms work on that number.
Ok thanks,
Will follow verbatim.
When Philz asks the root? question before rebbot do I answer yes or no.
so no need for firmware then?
Fish
Choose no, and no you don't need a firmware.
Thanks tried that.
Phone stable, one crash in 2 days but mic still intermittent.
Physically chnged mic and still problem.
Im thinking of trying RUU.
Which one do I need?
INFOversion: 0.5a
INFOversion-bootloader: 1.39.0000
INFOversion-baseband:
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOserialno: HT243W120604
INFOimei: 359188048330971
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: HTC__001
Thanks
the one that matches
fastboot getvar version-main
No main version!!!
C:\HTC>fastboot getvar version-main
version-main:
finished. total time: 0.005s
C:\HTC>
Hmm is this the problem then?
No main version!!
Ive been struggling with intermittent stability faults and trying to go back to stock.so was asked to getvar version-main.
I havnt got one.
C:\HTC>fastboot getvar version-m
version-main:
finished. total time: 0.039s
C:\HTC>fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 1.39.0000
INFOversion-baseband:
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 4161mV
INFOdevpower: 100
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 0.869s
Is there anyway to rectify this? or am I snookered.
If i am not mistaken your Cid corresponds with Europe wwe. That means the 401 region.
So it could be 3.14.401 or higher like 3.18.401 or 3.20.401
Mr Hofs said:
If i am not mistaken your Cid corresponds with Europe wwe. That means the 401 region.
So it could be 3.14.401 or higher like 3.18.401 or 3.20.401
Click to expand...
Click to collapse
OK thanks. It is a UK model,
I got it because the screen was crushed, so had to flash it as could not see the screen and then it would not charge.
A few times when I flashed it it just hung and on one occasion it even got hot.
Although running cyanogen its stable apart from mic.
Do you think the S/W is corrupt?
Which would be safest to try?
and waht are the implications. e.g. if I get the wrong one / go too high I could brick my phone.
Thanks again
Nah nandroid can't brick the phone. I would start with a 3.14.401.31 nand backup. When you boot into OS and touch is not working install a 3.18.401 !
Mr Hofs said:
Nah nandroid can't brick the phone. I would start with a 3.14.401.31 nand backup. When you boot into OS and touch is not working install a 3.18.401 !
Click to expand...
Click to collapse
Ta
Will report back
restoring a nandroid is just the same make sure it's on your sd card, enter restore and then click the folder and voila... (please note you must still flash the boot.img - just to be sure!)
Do I flash boot.img after restore (fastboot flash boot boot.img)?
I would start with a 3.14.401.31 nand backup. When you boot into OS and touch is not working install a 3.18.401 !
SO do I restore the 3.14 nand, then reboot
flash boot.img, reboot
Click to expand...
Click to collapse
. EDIT OOPS thats another command for TWRP?
then back to recovery and re-install 3.18, flash boot etc.?
Thanks
Yep always flash the boot.img from the nand to be safe
Twrp argghh
Well those nandroids are saved with TWRP.
Unfortunately the touch screen version of TWRP does not work with my phone so have to use JB version.
Unfortunately JB does not mount as USB storage, so cannot load nandroid to it.
Tried ONeX adb but would not work as file is not a ZIP file
So I guess i need to flash CWM recovery, copy files over, flash back to TWRP then restore.
Could not find backup for restore.
Did backup, found backup, copied downloaded nandroid (tar.bz file) to folder, still not visible.
So I guess falsh back to CWM again, suss out what to do with file? extract with winzip maybe?) back to TWRP
find directory and files etc, then try to restore again.
Boy is this going to be dirty
EVEN more TWRP
Just realised that I may need to install 2 nandrois, 3.14 then 3.18 BUT one has a boot.img as a seperate download and the other doesnt.
Will try to install the 3.14, the fastboot flash boot boot.img it and see what happens, then Ill be stuck cos no boot.img for tohter?
A nandroid should always contain a boot.img in the folder .....
As predicted touch not working
Now trying 3.18
As predicted touch not working
Now trying 3.18
and the boot .img
is boot.emmc.win
It's a twrp recovery nand. Flash the recovery.img and the boot.emmc.win file.
Fastboot flash boot boot.emmc.win
Its been a while since flashing roms and I was going to sell my one x but needed stock software and unrooting. But I have ended up with my phone stuck in fast boot with it saying re locked at the top. I think i know where I went wrong but its too late. I dont have any backup because it was ages ago and I have tried various stock roms all returning errors. This is what I was following:
"fastboot oem Lock"
2) "fastboot oem rebootRUU"
3) "fastboot flash zip firmware.zip"
4) "fastboot reboot-bootloader"
5) "fastboot flash "unlocktoken Unlocktoken.bin"
6 "fastboot flash recovery openrecovery-twrp-2.6.3.0-4.18.401.2-endeavoru-JB.img
7) fastboot flash boot ( the boot.img from the custom rom)
8) go in to recovery and install the custom rom.
I got stuck at 6 giving me an error, I presume it was the wrong file.
Do I actually have to do fastboot oem Lock, because its relocked?
Could anybody help me out with what stock roms and file I need please? I know there are a lot of posts but each one is idividual and with different firmware.
Thanks Guys
This is some of my info:
c:\fastboot>fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 1.39.0000
INFOversion-baseband: 5.1204.164.30H
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.14.771.34
INFOserialno: ***********************
INFOimei: ********************
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: H3G__001
INFObattery-status: good
INFObattery-voltage: 3759mV
INFOdevpower: 27
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
Will it unlock if I send a new unlock ticket through htc dev website?
si_d_2003 said:
Its been a while since flashing roms and I was going to sell my one x but needed stock software and unrooting. But I have ended up with my phone stuck in fast boot with it saying re locked at the top. I think i know where I went wrong but its too late. I dont have any backup because it was ages ago and I have tried various stock roms all returning errors. This is what I was following:
"fastboot oem Lock"
2) "fastboot oem rebootRUU"
3) "fastboot flash zip firmware.zip"
4) "fastboot reboot-bootloader"
5) "fastboot flash "unlocktoken Unlocktoken.bin"
6 "fastboot flash recovery openrecovery-twrp-2.6.3.0-4.18.401.2-endeavoru-JB.img
7) fastboot flash boot ( the boot.img from the custom rom)
8) go in to recovery and install the custom rom.
I got stuck at 6 giving me an error, I presume it was the wrong file.
Do I actually have to do fastboot oem Lock, because its relocked?
Could anybody help me out with what stock roms and file I need please? I know there are a lot of posts but each one is idividual and with different firmware.
Thanks Guys
This is some of my info:
c:\fastboot>fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 1.39.0000
INFOversion-baseband: 5.1204.164.30H
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.14.771.34
INFOserialno: ***********************
INFOimei: ********************
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: H3G__001
INFObattery-status: good
INFObattery-voltage: 3759mV
INFOdevpower: 27
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
Will it unlock if I send a new unlock ticket through htc dev website?
Click to expand...
Click to collapse
I've got the same phone as you, i'll upload my H3G_001 backup of Jelly Bean
You will need to use Phillz Recovery or Clockwork Mod Recovery
---------- Post added at 03:23 PM ---------- Previous post was at 02:49 PM ----------
wigankev said:
I've got the same phone as you, i'll upload my H3G_001 backup of Jelly Bean
You will need to use Phillz Recovery or Clockwork Mod Recovery
Click to expand...
Click to collapse
https://dl.dropboxusercontent.com/u/92848413/H3G_001%20JellyBean.zip just unzip it flash Phillz or Clockwork Mod Recovery.
wigankev said:
I've got the same phone as you, i'll upload my H3G_001 backup of Jelly Bean
You will need to use Phillz Recovery or Clockwork Mod Recovery
Click to expand...
Click to collapse
Awesome mate, your a legend!
When you say to use phillz or cmr, can I use these because all I can do is access the fastboot screen? Even if I select recovery in fastboot the htc quietly brilliant screen pops up then goes back to fast boot menu.
si_d_2003 said:
Awesome mate, your a legend!
When you say to use phillz or cmr, can I use these because all I can do is access the fastboot screen? Even if I select recovery in fastboot the htc quietly brilliant screen pops up then goes back to fast boot menu.
Click to expand...
Click to collapse
Go on to HTC Dev and get another unlock token, and proceed to unlock again, then flash CWM or Phillz, then recover your phone with the backup i provided. I have also provided the stock htc recovery in the folder seperately.
wigankev said:
Go on to HTC Dev and get another unlock token, and proceed to unlock again, then flash CWM or Phillz, then recover your phone with the backup i provided. I have also provided the stock htc recovery in the folder seperately.
Click to expand...
Click to collapse
Ok Cheers dude, I will give them a while and let you know. Thanks for the help:good:
wigankev said:
Go on to HTC Dev and get another unlock token, and proceed to unlock again, then flash CWM or Phillz, then recover your phone with the backup i provided. I have also provided the stock htc recovery in the folder seperately.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1604439 i recommend using this to unlock bootloader with the token you received from HTC Dev.
Ok, so got it unlocked again, my viper rom was still installed so the phone boots up. Now to get your jelly bean on correct me if Im wrong, your jellybean zip, shall i unzip it? what shall i do with .img file and the others?
si_d_2003 said:
Ok, so got it unlocked again, my viper rom was still installed so the phone boots up. Now to get your jelly bean on correct me if Im wrong, all i do is put the zip on the phones hd the boot into recovery and then select restore? Just tried it and it says no file found, does your back up go into a specific folder? or just select install from zip?
Click to expand...
Click to collapse
No, on Clockword Mod or Phillz recovery you use Backup and Restore option, you don't flash the zip file, i zipped it up so i could upload to dropbox, just flash the 2013-02-05.20.39.08 folder under restore, there should be a folder called Clockword Mod on your SD Card or something like that.
Sorry for being an idiot im just concerned because I was up till 4.30 this morning trying to sort this out. in cwm folder is one called downloads which goes into recoveries folder, does the folder 2013....go in there? Then by flash do you mean going to fast boot- backup/restore - restore? because it says no file found still.
si_d_2003 said:
Sorry for being an idiot im just concerned because I was up till 4.30 this morning trying to sort this out. in cwm folder is one called downloads which goes into recoveries folder, does the folder 2013....go in there? Then by flash do you mean going to fast boot- backup/restore - restore? because it says no file found still.
Click to expand...
Click to collapse
On your storage you should have a file called clockworkmod and inside that you should have another folder in there called backup, so your 2013-02-05.20.39.08 file should be in that backup folder.
wigankev said:
On your storage you should have a file called clockworkmod and inside that you should have another folder in there called backup, so your 2013-02-05.20.39.08 file should be in that backup folder.
Click to expand...
Click to collapse
Sorry there is no back up folder in there. Ive tried installing phillz over cwm it says complete but after flashing and when i reboot its still cwm. and in rom manager when I try to update cwm it gives me an error.
wigankev said:
On your storage you should have a file called clockworkmod and inside that you should have another folder in there called backup, so your 2013-02-05.20.39.08 file should be in that backup folder.
Click to expand...
Click to collapse
So then go into CWM or Phillz recovery then go to Backup and Restore and restore that 2013-02-05.20.39.08 file, then you should be back on stock H3G rom, then just flash the recovery i put in the folder separately, then you should be fully stock, then relock your Hboot/bootloader then you should be able to update your rom OTA to 4.2.2 and hboot to 1.72
Ok, so finally got there in the end. Hopefully. I have one more question and i will leave you alone.....ive sent the lock message and the bootloader now says relocked again. Is this different from locked? Can i get it to say locked instead of relocked as this looks like its been rooted before?
Thanks
si_d_2003 said:
Ok, so finally got there in the end. Hopefully. I have one more question and i will leave you alone.....ive sent the lock message and the bootloader now says relocked again. Is this different from locked? Can i get it to say locked instead of relocked as this looks like its been rooted before?
Thanks
Click to expand...
Click to collapse
Relocked is correct, did you remember to flash the original htc recovery before relocking?
I did, but.....F### its stuck in bootloader loop now. The bloody phone booted and everything then when I restarted it its now stuck looping.
ok after unlocking the phone boots up fine. Is there something wrong when i go to lock it the it wont boot up?
Cheers dude
si_d_2003 said:
Whats the problem do you think? does that mean I have to:
unroot and install the the files you gave me then lock again. I cant even access recovery in the bootloader
Click to expand...
Click to collapse
are you flash the boot.img from your nand backup via fastboot?
Thant said:
are you flash the boot.img from your nand backup via fastboot?
Click to expand...
Click to collapse
No i didnt do that, I just recovered the nand via cwm, then I flashed recovery.img then locked it. It was stuck in loop then as soon as I unlocked it booted.
si_d_2003 said:
No i didnt do that, I just recovered the nand via cwm, then I flashed recovery.img then locked it. It was stuck in loop then as soon as I unlocked it booted.
Click to expand...
Click to collapse
now take the boot.img from nand backup and flash it via fastboot with the command fastboot flash boot nameofboot.img but you must unlock it again and after this relock it again
Ok cool, that looks like its worked. Thanks for that buddy! Do you know if there is any way to change the ****relocked*** back to ***locked***
Hi guys!
Last week, I rooted my phone and installed CM12 nightly, due to the problems of CM12 integration of my 816 dual sim variant, I decided to unroot the phone and restore it to it's stock firmware.
Being the n00b that I am, I locked my bootloader using WinDroid, once the bootloader was locked the phone got stuck at the bootloader screen showing ***Tempered*** ***Relocked*** on top.
After looking up similar problems, I've downloaded various stock RUU in .zip format and they wouldn't flash into my phone.
Today, I've tried re-unlocking the bootloader by flashing the unlock_code.bin through fastboot and it worked, the deviced booted into CM12 boot screen and got stuck there and didn't proceed to home screen.
I restarted the phone into recovery and TWRP worked perfectly, did a delvick and cache wipe, restarted the phone again into recovery to flash the .img restore file and the TeamWin Team also got stuck there. Being desperate, I've flashed CWM hoping it'd work, now all I get is a black screen when I choose to go to recovery for the bootloader. Also, when I restart the phone without going into recovery, CM12 boot screen still shows up and don't proceed to home screen.
and here is my phone info:
INFOversion: 0.5
INFOversion-bootloader: 3.19.0.0000
INFOversion-baseband: 1.13.3230.16.05
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno: XXXXXXX
INFOimei: XXXXX
INFOimei2: XXXXX
INFOmeid: 00000000000000
INFOproduct: a5_dug
INFOplatform: hTCBmsm8226
INFOmodelid: 0P9C70000
INFOcidnum: HTC__J15
INFObattery-status: good
INFObattery-voltage: 0mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader:
INFOhbootpreupdate: 11
INFOgencheckpt: 0
What should I do? Please help a brother out!
Thanks for your time!
Have a good day!
try flashing CWM twice, it sometimes helps. and don't worry, it's not bad if it aint hard bricked
seekfind said:
try flashing CWM twice, it sometimes helps. and don't worry, it's not bad if it aint hard bricked
Click to expand...
Click to collapse
Thanks Seekfind for your reply! I've been trying to flash CWM since an hour now many times and it didn't work. I'm afraid that I have another n00b question, I'm not sure if the device still has root access or not, can I flash SuperSU through fastboot? Also, does restoring the phone back to it's stock ROM require a root?
Thanks!
You need to flash one recovery either TWRP or CWM via ADB
Then install the stock RUU for your ROM, you don't need to have root access in your ROM to go to Stock.
If it's not working, then try flashing the CM12 ROM again after wiping data, cache etc and enable USB Debugging and then try to flash the recovery.
Dark69Slayer said:
You need to flash one recovery either TWRP or CWM via ADB
Then install the stock RUU for your ROM, you don't need to have root access in your ROM to go to Stock.
If it's not working, then try flashing the CM12 ROM again after wiping data, cache etc and enable USB Debugging and then try to flash the recovery.
Click to expand...
Click to collapse
Hey Dark69Slayer, thing is:
1. I cannot access recovery, TWRP or CWM, is there a way to delete them in order to reflash them?
2. When I get access to TWRP -which happens once after every 15 flashes- it gives me an error when I wipe cache or data?
What should I do?
Copy all your data from phone
Flash Stock Recovery
Lock Bootloader
Install Stock RUU ( use HBOOT to install the RUU)