Develop Bugs

[Q] Looking for Endeavour 1.29.206.11 please

I hope that this post is in the correct forum section - apologies if not and apologies if there is already a thread on this subject (I did try searching but nothing that provided a link to a RUU).
Here's what I've done:
Flashed a custom ROM to my UK O2 HTC One X
Then tried to restore it to stock without taking a Clockwork recovery backup (deleted all caches and storage in the process)
Tried to flash with stock RUU found online (1.26.206.2) but RUU software throws an error as the exisiting f/w is 1.29.206.11 and this is what it is expecting
I can access the HOX through fastboot to lock and unlock the device but I cannot see the "SD card" to copy over a custom ROM to at least get some life into the thing (it just sits at the white HTC loading screen until the battery dies).
Ideally I want to return the thing to stock (if anyone has a O2 UK 1.29.206.11 RUU) but failing that is there anyway to get a custom ROM on there (for installation with CWM) without my PC (Windows 7 or Mac available) seeing the HOX storage?
Thanks for reading and any help you can pass on.

brlauk_HOX said:
I hope that this post is in the correct forum section - apologies if not and apologies if there is already a thread on this subject (I did try searching but nothing that provided a link to a RUU).
Here's what I've done:
Flashed a custom ROM to my UK O2 HTC One X
Then tried to restore it to stock without taking a Clockwork recovery backup (deleted all caches and storage in the process)
Tried to flash with stock RUU found online (1.26.206.2) but RUU software throws an error as the exisiting f/w is 1.29.206.11 and this is what it is expecting
I can access the HOX through fastboot to lock and unlock the device but I cannot see the "SD card" to copy over a custom ROM to at least get some life into the thing (it just sits at the white HTC loading screen until the battery dies).
Ideally I want to return the thing to stock (if anyone has a O2 UK 1.29.206.11 RUU) but failing that is there anyway to get a custom ROM on there (for installation with CWM) without my PC (Windows 7 or Mac available) seeing the HOX storage?
Thanks for reading and any help you can pass on.
Click to expand...
Click to collapse
if you can get into to CWM there is an option to mount sd in there somewhere, if you can't get into it maybe try re-flashing it

seanicca said:
if you can get into to CWM there is an option to mount sd in there somewhere, if you can't get into it maybe try re-flashing it
Click to expand...
Click to collapse
Thanks for the reply - I tried that but CWM returns an error when trying to mount the SD card.

Tried flashing 1.26.206.2 through fast boot?

brlauk_HOX said:
Thanks for the reply - I tried that but CWM returns an error when trying to mount the SD card.
Click to expand...
Click to collapse
Cwm 5.8.4.0 allows sd mounting in recovery, try flashing that
sent from my One X using xda venom premium

xmoo said:
Tried flashing 1.26.206.2 through fast boot?
Click to expand...
Click to collapse
DO you mean extracting the 2 img files from the RUU zip and running from fastboot command prompt? If so, the second img file returns a [0000006] error.

brlauk_HOX said:
DO you mean extracting the 2 img files from the RUU zip and running from fastboot command prompt? If so, the second img file returns a [0000006] error.
Click to expand...
Click to collapse
Get the rom.zip and
adb reboot oem-78
fastboot flash zip rom.zip

http://forum.xda-developers.com/showthread.php?p=28665193
Sent from my HTC One X

I'm looking for this Nandroid too but all the links I've found are broken. Can anyone help out? Preferably a CWM backup if at all possible.
brlauk_HOX said:
I hope that this post is in the correct forum section - apologies if not and apologies if there is already a thread on this subject (I did try searching but nothing that provided a link to a RUU).
Here's what I've done:
Flashed a custom ROM to my UK O2 HTC One X
Then tried to restore it to stock without taking a Clockwork recovery backup (deleted all caches and storage in the process)
Tried to flash with stock RUU found online (1.26.206.2) but RUU software throws an error as the exisiting f/w is 1.29.206.11 and this is what it is expecting
I can access the HOX through fastboot to lock and unlock the device but I cannot see the "SD card" to copy over a custom ROM to at least get some life into the thing (it just sits at the white HTC loading screen until the battery dies).
Ideally I want to return the thing to stock (if anyone has a O2 UK 1.29.206.11 RUU) but failing that is there anyway to get a custom ROM on there (for installation with CWM) without my PC (Windows 7 or Mac available) seeing the HOX storage?
Thanks for reading and any help you can pass on.
Click to expand...
Click to collapse

blocka said:
I'm looking for this Nandroid too but all the links I've found are broken. Can anyone help out? Preferably a CWM backup if at all possible.
Click to expand...
Click to collapse
Install directly the RUU 1.26.206.2

Thant said:
Install directly the RUU 1.26.206.2
Click to expand...
Click to collapse
thank you appreciate the link

Thant said:
Install directly the RUU 1.26.206.2
Click to expand...
Click to collapse
BTW my HBOOT version is 0.96, this won't cause any issues will it when it comes to running the RUU?

blocka said:
BTW my HBOOT version is 0.96, this won't cause any issues will it when it comes to running the RUU?
Click to expand...
Click to collapse
Please post the result from command fastboot getvar all and delete IMEI and S/N

Thant said:
Please post the result from command fastboot getvar all and delete IMEI and S/N
Click to expand...
Click to collapse
fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 0.96.0000
INFOversion-baseband: None
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.29.206.11
INFOserialno: xxxxxxxxxxxxx
INFOimei: xxxxxxxxxxxxxxx
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: None
INFObattery-status: good
INFObattery-voltage: 4148mV
INFOdevpower: 100
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 1.172s
fastboot oem readcid
... INFODEBUG: cid: O2___001

blocka said:
fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 0.96.0000
INFOversion-baseband: None
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.29.206.11
INFOserialno: xxxxxxxxxxxxx
INFOimei: xxxxxxxxxxxxxxx
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: None
INFObattery-status: good
INFObattery-voltage: 4148mV
INFOdevpower: 100
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 1.172s
fastboot oem readcid
... INFODEBUG: cid: O2___001
Click to expand...
Click to collapse
Ok in this case Download RUU 2.17.206.2 and run the RUU the RUU 1.26.206.2 will not work for you. Lock the bootloader and run the RUU

Thant said:
Ok in this case Download RUU 2.17.207.2 and run the RUU the RUU 1.267.206.2 will not work for you.
Click to expand...
Click to collapse
Cheers! can you explain to a noob why this is the case? BTW the file in the link is only 15MB, is this the correct file size?

blocka said:
Cheers! can you explain to a noob why this is the case? BTW the file in the link is only 15MB, is this the correct file size?
Click to expand...
Click to collapse
Ok this is bad this RUU is not full must be 500-600 Mb= Surch from google to download the RUU 2.17.206.2 for HTC one X and install this in Android RUU files store is not the full. The case is you have 1.29.206.11 witch is newer vrom 1.26.206.2 and if you try to install it you will receive error wrong RUU.
EDIT: I think you will not find this RUU surch here in xda for nandroid backup for 1.29.206.11 and restor it and dont forget to restor the stock recovery too.

Thant said:
Ok this is bad this RUU is not full must be 500-600 Mb= Surch from google to download the RUU 2.17.206.2 for HTC one X and install this in Android RUU files store is not the full. The case is you have 1.29.206.11 witch is newer vrom 1.26.206.2 and if you try to install it you will receive error wrong RUU.
EDIT: I think you will not find this RUU surch here in xda for nandroid backup for 1.29.206.11 and restor it and dont forget to restor the stock recovery too.
Click to expand...
Click to collapse
Thanks for your help, appreciate it!
I've got the RUU you suggested from HERE
Now to apply this RUU all I need to do is run the file (exe) and follow the bouncing ball?
Then once flashed (back to stock), to install a custom recovery (so I can do a nandroid) is unlock the bootloader, install the recovery, and take the nandroid backup. To get the OTA Update(s), I'll need to relock the bootloader, do the automated system updater, redo nandroid, then onto a custom recovery once HBOOT has been updated via the OTA process?
EDIT: Take a nandroid backup first of course

blocka said:
Thanks for your help, appreciate it!
I've got the RUU you suggested from HERE
Now to apply this RUU all I need to do is run the file (exe) and follow the bouncing ball?
Then once flashed (back to stock), to install a custom recovery (so I can do a nandroid) is unlock the bootloader, install the recovery, and take the nandroid backup. To get the OTA Update(s), I'll need to relock the bootloader, do the automated system updater, redo nandroid, then onto a custom recovery once HBOOT has been updated via the OTA process?
EDIT: Take a nandroid backup first of course
Click to expand...
Click to collapse
NO You can't receive the OTA via custom recovery you need ctock recovery and stock rom unrooted
1) Lock your bootloader
2) Run the RUU
3) Apllay all update to 4.x.206.x 4.2.2 JB
4) Unlock your Bootloader
5) Install Philz custom recovery
6) Do a Nandroid Backup on 4.2.2.JB . Save on secure plase it is better to have 2 copies on nandroid on different place
7) If you wont Install custom rom or root the stock it is your decision and don't forget to flash the boot.img if you install custom rom

Thant said:
Ok in this case Download RUU 2.17.207.2 and run the RUU the RUU 1.26.206.2 will not work for you. Lock the bootloader and run the RUU
Click to expand...
Click to collapse
Hi - was just about to go through the process of reverting to stock when I noticed the RUU and link you suggested
Download RUU 2.17.207.2
Click to expand...
Click to collapse
actually is linked to RUU_ENDEAVOR_U_ICS_40_S_O2_UK_2.17.206.2_Radio_2.1204.135.20_release_275038_signed.exe.
So before I start I need to find out exactly what RUU I need, either 2.17.206.2 or 2.17.207.2.
Thanks for ya help .

[Q] [urgent] Bocked at htc logo

HI every one,
i searched the forum upto some extent but i did't find the solution.
this the status of my htc one x
i have recovery-clockwork. nooting else is working. i formated the sdcard, system, data and cache.
when i try to push any thing to sdcard it is givig the error read-only-file system.
now what are all the steps to be done to recovery back my htc one x to normal mode.
and also please provide the links from where i have to download
Details of mobile(versions):
version: 0.5a
version-bootloader: 1.12.0000
version-baseband: 2.1204.135.20
version-cpld: None
version-microp: None
version-main: 2.17.720.2
product: endeavoru
platform: HBOOT-T30S
modelid: PJ4610000
cidnum: HTC__038
battery-status: low
battery-voltage: 3523mV
devpower: 0
partition-layout: None
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
PLEASE HELP
Thanks, in advance.

Flash cwm recovery 5.8.4.0 (if you don't have it already installed)
Download a ICS rom and copy the boot.img from the rom.zip to the fastboot folder.
Put the phone in fastboot USB mode and flash the boot.img
Go into recovery and do full wipe EXCEPT Sd card ! Then mount sdcard as USB drive and Copy the rom.zip over to it
Flash the rom.zip from recovery and reboot
And stay away from the AT&T ROGERS FORUM that's for a different one x !
We have the ENDEAVORU type phone.....stay in this forum and don't flash anything from the other forum, you might brick the phone !

Thanks for the help
Thanks for the help.
MarcelHofs said:
Flash cwm recovery 5.8.4.0 (if you don't have it already installed)
Download a ICS rom and copy the boot.img from the rom.zip to the fastboot folder.
Put the phone in fastboot USB mode and flash the boot.img
Go into recovery and do full wipe EXCEPT Sd card ! Then mount sdcard as USB drive and Copy the rom.zip over to it
Flash the rom.zip from recovery and reboot
And stay away from the AT&T ROGERS FORUM that's for a different one x !
We have the ENDEAVORU type phone.....stay in this forum and don't flash anything from the other forum, you might brick the phone !
Click to expand...
Click to collapse

msaipraneeth said:
Thanks for the help.
Click to expand...
Click to collapse
But did it work ?

Hope this helps. Everything you need should be in here.
http://forum.xda-developers.com/showthread.php?t=1609190

MarcelHofs said:
But did it work ?
Click to expand...
Click to collapse
Previously I am using the old clockworkmod, now by seeing ur post i updated the recovery and mounted the sdcard. from this rest of the steps to recover is pretty simple.

msaipraneeth said:
Previously I am using the old clockworkmod, now by seeing ur post i updated the recovery and mounted the sdcard. from this rest of the steps to recover is pretty simple.
Click to expand...
Click to collapse
It's very simple

MarcelHofs said:
It's very simple
Click to expand...
Click to collapse
i found custom rom zip file. used this zip to flash the system and boot. camera and beats audio is not working with this rom.
can you provide the link for RRU 2.17.720.2 asia. so that i can update my mobile to official jelly bean released by HTC.
or provide me work around to update my phone to official jelly bean
Thanks.

You can check here, but i don't see it
http://www.htcruu.com/?dir=Endeavor
But if you have the nandroid backup.....it's the same as a ruu !
You have to restore the whole nandroid and not just the system and boot.
You have to do a full wipe from recovery and flash the boot.img from the nandroid and then restore the complete nandroid in recovery ! It's exactly the same as a ruu except the stock recovery is not included so you have to flash that after you restored the nandroid !

msaipraneeth said:
Previously I am using the old clockworkmod, now by seeing ur post i updated the recovery and mounted the sdcard. from this rest of the steps to recover is pretty simple.
Click to expand...
Click to collapse
These are steps followed to recovery my whole HTC one x normal state.
1. Flashed the boot and recovery images form 2.17.720.2 OTA.
2. oem lock
3. Downloaded the RUU 2.17.720.2 from file factory (for this u need primer account. just googled it). As my device main version is 2.17 for ur download the respective ones.
4. Ran the RUU when the mobile is in fastboot mode.
5. That's it my devices is recovered back to 2.17.720.2
6. Software update is done form about section. (with out any issue.)
these steps are simple but, to identify these i have done lot of searching and background work.
at last I did it.
thanks for members helped me and thanks for XDA.
Now i got some idea about the process involved in the booting up of device and upgrade process. if you stuck any of the issue mentioned in the previous post of this thread. reply back with the issue.

[Q] Please help ! bootloop after OTA of rooted phone

Hi guys,
Please help !
I've bought a new phone, htc one x, from someone. barely had time to install few apps, and got this OTA update message.
Without thinking twice - i did it. But it seems that the phone was rooted ! and as I understand now - it's a big no-no .
I've tried to figure out from the forum what to do , but - all the answers seems to include fastboot and ADB, which in turn require
the drivers of the phone to be installed. But my phone is dead ! so I can' t do it.
I'm new to roms and all, and I really need your help .
How can I make my phone work again ? I don't care which ROM , custom or stock , just to make it work .
Any help will be appreciated.
Gena

You can access Fastboot? Hold POWER and VOLUMEN - (down)..?
Sent from my HTC One X using Tapatalk 2

big noob said:
You can access Fastboot? Hold POWER and VOLUMEN - (down)..?
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
Hi , yes, I can access the fast boot, but even trying to restore to factory defaults didn't help.
And I can't istall the fastboot on my pc since it needs to connect to a working phone in debug mode (if I understand correctly)

Google Fastboot files
And place them on your pc..for example
On desktop..
C:\Users\Name\Desktop\
and next step go in that directory via CMD typr this
cd C:\Users\Name\Desktop\Fastboot\
And type this
Fastboot getvar cid
Then you will se your CID
go this thread and follow steps to recover your phone
http://forum.xda-developers.com/showthread.php?t=1975140
Sent from my HTC One X using Tapatalk 2

big noob said:
Google Fastboot files
And place them on your pc..for example
On desktop..
C:\Users\Name\Desktop\
and next step go in that directory via CMD typr this
cd C:\Users\Name\Desktop\Fastboot\
And type this
Fastboot getvar cid
Then you will se your CID
go this thread and follow steps to recover your phone
http://forum.xda-developers.com/showthread.php?t=1975140
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
Thank you very much for your help.
I've did the steps as you say, and finally was able to "see" my phone in fastboot from PC.
but the CID I am getting is 11111111 , and there is no backup that matches it.
Can I overwrite it with some kind of rom ? I don't care to loose all the data, just to get a working phone.

Download clockwordmod recovery img file And flash it via Fastboot..
Fastboot flash recovery recoveryname.img
And then download this file:
Link!
And then access in recovery mount storage and copy that .zip file on your phone Clear and wipe everything except battery stats..And then flash that .zip file

genaddiy said:
Thank you very much for your help.
I've did the steps as you say, and finally was able to "see" my phone in fastboot from PC.
but the CID I am getting is 11111111 , and there is no backup that matches it.
Can I overwrite it with some kind of rom ? I don't care to loose all the data, just to get a working phone.
Click to expand...
Click to collapse
You are S-OFF you can install any RUU try with THIS ONE lock the bootloader and run the RUU as Administrator
post result from command fastboot getvar all and delete your S/N and IMEI from the info for any case
---------- Post added at 02:33 PM ---------- Previous post was at 02:32 PM ----------
big noob said:
Download clockwordmod recovery img file And flash it via Fastboot..
Fastboot flash recovery recoveryname.img
And then download this file:
Link!
And then access in recovery mount storage and copy that .zip file on your phone Clear and wipe everything except battery stats..And then flash that .zip file And try to flash it
Click to expand...
Click to collapse
He can't install OTA from recovery and you can't install OTA from recovery!!!!

Hi Thant, thank you for your help.
So you are saying that big noob's method won't work ?
I've downloaded the RUU, but I did not understand what you've meant by : "lock the bootloader" and when should I post the results of "fastboot getvar all" ? after I run the RUU , or before ?

You should post it before RUU..Well i tryed my method before and .zip flashed successfully..
And you can relock it with this command:
fastboot oem lock

Here's what I've got, no what should I do with it ?
>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.12.0000
(bootloader) version-baseband: 2.1204.135.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.17.401.2
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ461****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3821mV
(bootloader) devpower: 47
(bootloader) partition-layout: None
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.830s

You can relock your bootloader download RUU and run it as administrator

I tried to relock , but it said phone is already locked.
Then I ran RUU and got the following error :
ERROR [159] - The ROM update utility cannot update your Android phone. Please get the correct ROM Update Utility and try again .
But what is the correct for me ? and where do I get it ?

genaddiy said:
I tried to relock , but it said phone is already locked.
Then I ran RUU and got the following error :
ERROR [159] - The ROM update utility cannot update your Android phone. Please get the correct ROM Update Utility and try again .
But what is the correct for me ? and where do I get it ?
Click to expand...
Click to collapse
Try this one
And when you in bootloader what is writen up RELOCKED and ENDEAVORU XE or ENDEAVORU PVT

98552432 231
In the bootloader it says :
*** LOCKED *****
ENDEAVORU XE SHIP S-OFF RL

genaddiy said:
In the bootloader it says :
*** LOCKED *****
ENDEAVORU XE SHIP S-OFF RL
Click to expand...
Click to collapse
ENDEAVORU XE have problems with update you must manually update the firmware and after this to install RUU or custom rom.
Download THIS OTA open the zip and extract firmware.zip to your fastboot folder after this do this
Type: fastboot oem rebootRUU and wait for device to reboot you will see HTC logo
Type: fastboot flash zip firmware.zip and wait for process to complete
Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
Type: fastboot flash zip firmware.zip and wait for process to complete
Type: fastboot reboot
Unlock your bootloader and flash custom recovery if you are going to use custom ROM.

I want to thank you for your patience with a noob like me
I did everything till the last line.
After flashboot reboot, my phone passed the first htc logo that it was stuck on , but now it's stuck on htc one screen (the one with beats audio logo at the bottom) .
Do I need to do the flash custom rom recovery ?

genaddiy said:
I want to thank you for your patience with a noob like me
I did everything till the last line.
After flashboot reboot, my phone passed the first htc logo that it was stuck on , but now it's stuck on htc one screen (the one with beats audio logo at the bottom) .
Do I need to do the flash custom rom recovery ?
Click to expand...
Click to collapse
yes now flash custom recovery philz 5.15.x mount usb storage copy custom rom to the phone install and flash the boot.img and you will have working rom sense or no sense. Now after flash the firmware what is your hboot version 1.39? If yes you are ready to go

ok , just to make sure I understand before I do it a screw something up :
"yes now flash custom recovery philz 5.15.x mount usb storage copy custom rom to the phone install and flash the boot.img and you will have working rom sense or no sense. Now after flash the firmware what is your hboot version 1.39? If yes you are ready to go"
my hboot version is indeed 1.39
so I d/l philz custom recovery .
no I should :
fastboot flash zip philz_touch_6.07.9-endeavoru.zip
then go to the custom recovery ? (how ? ? ? )
then d/l some custom rom (any recomendations ? just a good stable one, possibly stock)
then copy it to phone using fastboot
and then , from custom recovery flash it ?
I'm sorry for all these questions, but I'm afraid to touch the damn thing already ))))

Flash the recovery (its a img file NOT a zip, take out the img if its in the zip)
Fastboot flash recovery recoveryname.img
Fastboot erase cache
Enter the recovery by selecting FASTBOOT in the bootloader and then RECOVERY (navigate with the volume buttons and confirm with the power button)
Go to the mounts and storage menu and mount the sdcard as a mass storage disk (wait a few minutes until it pops up on the pc)
Copy the rom.zip to the sdcard. Take out the boot.img and flash it via fastboot
Fastboot flash boot boot.img
Fastboot erase cache
Enter recovery again and perform a full wipe
Factory reset
Wipe cache partition
Advanced-wipe dalvik cache
Mounts and storage-format cache, data and system
Install the rom.zip
Done !
Roms....just check the android dev section. Many roms to choose and read up for yourself. It's not that difficult ...maximus and arhd are very close to stock.

Thank you for the detailed reply !
When doing Fastboot flash recovery recoveryname.img I got the messege :
FAILED <remote : not allowed>
Is the problem that my phone is locked ? (written locked at the top of fastboot screen) tried to do fastboot oem unlock but getting "Command error !" .
I saw this solution : http://forum.cyanogenmod.com/topic/74316-a-solution-to-fastboot-flash-recovery-not-allowed-error/ , but I'm not sure it will fit my phone (as it talkes about a different one) and what is a PD98IMG.zip file ?

[Q] Help. IMEI lost. Plane mode blocked. No pin enter. No GSM.

Hello,
I'm french so excuse me for my english.
I've done all the HTC update until november 2013.
I've decided to test a new ROM cyanogenmod 10.2
So I've unlocked my bootloader, installed a Clockworkrecovery and flashed a ROM Cyanogen 10.2.
I tried other ROM like Sentinelrom and everything was fine.
My phone was perfectly working.
Since 2 days, I've lost my IMEI and the GSM function of my phone. It never ask the pin code.
I was using it without any problem, on internet with wifi, and suddenly it was blocked in plane mode but wifi, bluetooth still working but no more GSM.
When I do *#06# to see the IMEI, there is the standard window but no IMEI. I know my IMEI because I have the original box of the phone and it's printed ont it.
The plane mode is blocked in desactivation but never totally so it can't work.
I tried many things :
- Flash a new Cyanogen ROM. Works perfectly except the GSM - no IMEI no pin enter.
- Flash some HTC stock ROM (ICS 2.17, JB, 3.16, 4.18, etc.). Works perfectly except the GSM - no IMEI no pin enter.
I don't have any file/folder efs with the IMEI in the phone (search with ES Explorer rooted). I think the problem is here.
I would like to flash a HTC Rom with an RUU file, maybe it could solve my problem but my bootloader version is 1.72 so I can't.
My phone is S-ON so I can't downgrade the bootloader in an older version before 1.3x.
I would like to rewrite the IMEI but I don't know the file, the procedure, etc...
SO I NEED YOUR HELP !
Infos via fastboot getvar all : few number of IMEI are masked to keep my phone identity but I've the complete number.
INFOversion: 0.5a
INFOversion-bootloader: 1.72.0000
INFOversion-baseband: 5.1204.167.31
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.18.401.2
INFOserialno: HT23KW104264
INFOimei: 35918*****73828
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 3844mV
INFOdevpower: 62
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!

Do you flash the boot.img via fastboot of the rom you are running ?

Mr Hofs said:
Do you flash the boot.img via fastboot of the rom you are running ?
Click to expand...
Click to collapse
Yes. Every flash I do, I flash the boot.img who is in the zip file of each ROM with fastboot. I just check but it's the good file
(No problem with the start of the phone.
Usually I flash the recovery.img with fastboot too.)
I think a flash with RUU file works differently. It flash "all in one", even boot and recovery...

Yes but there is no ruu. Only things you can try is to reflash a rom, flash the boot.img and make sure you make a proper full wipe !
Other things to try :
Relock the bootloader and reflash the firmware, unlock and reflash a new rom again. If the imei and signal are still missing it's proper borked !

Mr Hofs said:
Yes but there is no ruu. Only things you can try is to reflash a rom, flash the boot.img and make sure you make a proper full wipe !
Other things to try :
Relock the bootloader and reflash the firmware, unlock and reflash a new rom again. If the imei and signal are still missing it's proper borked !
Click to expand...
Click to collapse
Yep, no RUU.
Any advice for a "very full wipe ? Usually I make "wipe data" / "wipe cache" / "wipe Dalvik cache" with the recovery clockworkMod. I've seen something named SuperWipe. Is it better ?
Same question for the firmware : wich firmware I should use ? If you know a very stable and secure version (combinaison) of ROM with firmware, I would know.
Thanks a lot for all your answers !

The 4.18.401 firmware is the one you need. A full wipe in my book is :
Factory reset
Wipe cache partition
Advanced-wipe dalvik cache
Mounts&storage-format cache, data, system
Basically what you can try is to follow the next thread and flash the 4.18.401 firmware.zip. how to is described there, take your time to read the OP
http://forum.xda-developers.com/showthread.php?t=1957376
After the firmware flash you unlock the bootloader again and reflash the custom recovery and install a new rom with a full wipe.

[Q] One X relocked with no rom on

Its been a while since flashing roms and I was going to sell my one x but needed stock software and unrooting. But I have ended up with my phone stuck in fast boot with it saying re locked at the top. I think i know where I went wrong but its too late. I dont have any backup because it was ages ago and I have tried various stock roms all returning errors. This is what I was following:
"fastboot oem Lock"
2) "fastboot oem rebootRUU"
3) "fastboot flash zip firmware.zip"
4) "fastboot reboot-bootloader"
5) "fastboot flash "unlocktoken Unlocktoken.bin"
6 "fastboot flash recovery openrecovery-twrp-2.6.3.0-4.18.401.2-endeavoru-JB.img
7) fastboot flash boot ( the boot.img from the custom rom)
8) go in to recovery and install the custom rom.
I got stuck at 6 giving me an error, I presume it was the wrong file.
Do I actually have to do fastboot oem Lock, because its relocked?
Could anybody help me out with what stock roms and file I need please? I know there are a lot of posts but each one is idividual and with different firmware.
Thanks Guys
This is some of my info:
c:\fastboot>fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 1.39.0000
INFOversion-baseband: 5.1204.164.30H
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.14.771.34
INFOserialno: ***********************
INFOimei: ********************
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: H3G__001
INFObattery-status: good
INFObattery-voltage: 3759mV
INFOdevpower: 27
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
Will it unlock if I send a new unlock ticket through htc dev website?

si_d_2003 said:
Its been a while since flashing roms and I was going to sell my one x but needed stock software and unrooting. But I have ended up with my phone stuck in fast boot with it saying re locked at the top. I think i know where I went wrong but its too late. I dont have any backup because it was ages ago and I have tried various stock roms all returning errors. This is what I was following:
"fastboot oem Lock"
2) "fastboot oem rebootRUU"
3) "fastboot flash zip firmware.zip"
4) "fastboot reboot-bootloader"
5) "fastboot flash "unlocktoken Unlocktoken.bin"
6 "fastboot flash recovery openrecovery-twrp-2.6.3.0-4.18.401.2-endeavoru-JB.img
7) fastboot flash boot ( the boot.img from the custom rom)
8) go in to recovery and install the custom rom.
I got stuck at 6 giving me an error, I presume it was the wrong file.
Do I actually have to do fastboot oem Lock, because its relocked?
Could anybody help me out with what stock roms and file I need please? I know there are a lot of posts but each one is idividual and with different firmware.
Thanks Guys
This is some of my info:
c:\fastboot>fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 1.39.0000
INFOversion-baseband: 5.1204.164.30H
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.14.771.34
INFOserialno: ***********************
INFOimei: ********************
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: H3G__001
INFObattery-status: good
INFObattery-voltage: 3759mV
INFOdevpower: 27
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
Will it unlock if I send a new unlock ticket through htc dev website?
Click to expand...
Click to collapse
I've got the same phone as you, i'll upload my H3G_001 backup of Jelly Bean
You will need to use Phillz Recovery or Clockwork Mod Recovery
---------- Post added at 03:23 PM ---------- Previous post was at 02:49 PM ----------
wigankev said:
I've got the same phone as you, i'll upload my H3G_001 backup of Jelly Bean
You will need to use Phillz Recovery or Clockwork Mod Recovery
Click to expand...
Click to collapse
https://dl.dropboxusercontent.com/u/92848413/H3G_001%20JellyBean.zip just unzip it flash Phillz or Clockwork Mod Recovery.

wigankev said:
I've got the same phone as you, i'll upload my H3G_001 backup of Jelly Bean
You will need to use Phillz Recovery or Clockwork Mod Recovery
Click to expand...
Click to collapse
Awesome mate, your a legend!
When you say to use phillz or cmr, can I use these because all I can do is access the fastboot screen? Even if I select recovery in fastboot the htc quietly brilliant screen pops up then goes back to fast boot menu.

si_d_2003 said:
Awesome mate, your a legend!
When you say to use phillz or cmr, can I use these because all I can do is access the fastboot screen? Even if I select recovery in fastboot the htc quietly brilliant screen pops up then goes back to fast boot menu.
Click to expand...
Click to collapse
Go on to HTC Dev and get another unlock token, and proceed to unlock again, then flash CWM or Phillz, then recover your phone with the backup i provided. I have also provided the stock htc recovery in the folder seperately.

wigankev said:
Go on to HTC Dev and get another unlock token, and proceed to unlock again, then flash CWM or Phillz, then recover your phone with the backup i provided. I have also provided the stock htc recovery in the folder seperately.
Click to expand...
Click to collapse
Ok Cheers dude, I will give them a while and let you know. Thanks for the help:good:

wigankev said:
Go on to HTC Dev and get another unlock token, and proceed to unlock again, then flash CWM or Phillz, then recover your phone with the backup i provided. I have also provided the stock htc recovery in the folder seperately.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1604439 i recommend using this to unlock bootloader with the token you received from HTC Dev.

Ok, so got it unlocked again, my viper rom was still installed so the phone boots up. Now to get your jelly bean on correct me if Im wrong, your jellybean zip, shall i unzip it? what shall i do with .img file and the others?

si_d_2003 said:
Ok, so got it unlocked again, my viper rom was still installed so the phone boots up. Now to get your jelly bean on correct me if Im wrong, all i do is put the zip on the phones hd the boot into recovery and then select restore? Just tried it and it says no file found, does your back up go into a specific folder? or just select install from zip?
Click to expand...
Click to collapse
No, on Clockword Mod or Phillz recovery you use Backup and Restore option, you don't flash the zip file, i zipped it up so i could upload to dropbox, just flash the 2013-02-05.20.39.08 folder under restore, there should be a folder called Clockword Mod on your SD Card or something like that.

Sorry for being an idiot im just concerned because I was up till 4.30 this morning trying to sort this out. in cwm folder is one called downloads which goes into recoveries folder, does the folder 2013....go in there? Then by flash do you mean going to fast boot- backup/restore - restore? because it says no file found still.

si_d_2003 said:
Sorry for being an idiot im just concerned because I was up till 4.30 this morning trying to sort this out. in cwm folder is one called downloads which goes into recoveries folder, does the folder 2013....go in there? Then by flash do you mean going to fast boot- backup/restore - restore? because it says no file found still.
Click to expand...
Click to collapse
On your storage you should have a file called clockworkmod and inside that you should have another folder in there called backup, so your 2013-02-05.20.39.08 file should be in that backup folder.

wigankev said:
On your storage you should have a file called clockworkmod and inside that you should have another folder in there called backup, so your 2013-02-05.20.39.08 file should be in that backup folder.
Click to expand...
Click to collapse
Sorry there is no back up folder in there. Ive tried installing phillz over cwm it says complete but after flashing and when i reboot its still cwm. and in rom manager when I try to update cwm it gives me an error.

wigankev said:
On your storage you should have a file called clockworkmod and inside that you should have another folder in there called backup, so your 2013-02-05.20.39.08 file should be in that backup folder.
Click to expand...
Click to collapse
So then go into CWM or Phillz recovery then go to Backup and Restore and restore that 2013-02-05.20.39.08 file, then you should be back on stock H3G rom, then just flash the recovery i put in the folder separately, then you should be fully stock, then relock your Hboot/bootloader then you should be able to update your rom OTA to 4.2.2 and hboot to 1.72

Ok, so finally got there in the end. Hopefully. I have one more question and i will leave you alone.....ive sent the lock message and the bootloader now says relocked again. Is this different from locked? Can i get it to say locked instead of relocked as this looks like its been rooted before?
Thanks

si_d_2003 said:
Ok, so finally got there in the end. Hopefully. I have one more question and i will leave you alone.....ive sent the lock message and the bootloader now says relocked again. Is this different from locked? Can i get it to say locked instead of relocked as this looks like its been rooted before?
Thanks
Click to expand...
Click to collapse
Relocked is correct, did you remember to flash the original htc recovery before relocking?

I did, but.....F### its stuck in bootloader loop now. The bloody phone booted and everything then when I restarted it its now stuck looping.

ok after unlocking the phone boots up fine. Is there something wrong when i go to lock it the it wont boot up?
Cheers dude

si_d_2003 said:
Whats the problem do you think? does that mean I have to:
unroot and install the the files you gave me then lock again. I cant even access recovery in the bootloader
Click to expand...
Click to collapse
are you flash the boot.img from your nand backup via fastboot?

Thant said:
are you flash the boot.img from your nand backup via fastboot?
Click to expand...
Click to collapse
No i didnt do that, I just recovered the nand via cwm, then I flashed recovery.img then locked it. It was stuck in loop then as soon as I unlocked it booted.

si_d_2003 said:
No i didnt do that, I just recovered the nand via cwm, then I flashed recovery.img then locked it. It was stuck in loop then as soon as I unlocked it booted.
Click to expand...
Click to collapse
now take the boot.img from nand backup and flash it via fastboot with the command fastboot flash boot nameofboot.img but you must unlock it again and after this relock it again

Ok cool, that looks like its worked. Thanks for that buddy! Do you know if there is any way to change the ****relocked*** back to ***locked***