Related
So ive been doing a lot of reading on rooting phones and the best way to go about doing this, but I still have a few questions about the whole process. First IM going to briefly write what I understand about the process and have it corrected and then ask my questions.
To root:
I will follow this guide http://forums.androidcentral.com/ve...ock-bootloader-root-verizon-galaxy-nexus.html
Basically I will make sure all drivers are updated on my computer (samsung and USB)
Use command prompt to unlock the boot loader and then install superboot for the GN
after this process is done and I reboot the phone I will be unlocked and ready to go
Modding
Done through CWM
1. I will download the mod that I want and place it in my phones internal memory.
2. boot into recovery mode with CWM
3. backup the phone with CWM (can anyone tell me where the back up is saved)
4. factory reset the phone
5. install zip from SD card (which will be the mod)
6. reboot back into recovery mode and install Gapps that I downloaded from the cryogen mod wiki through the "install zip from SD card" option. http://wiki.cyanogenmod.com/index.php?title=Latest_Version
7. Reboot phone and i will be good to go
SO my questions:
1. If i missed anything, can you guys quote my steps and add in what i left out in the correct order?
2. How do I update the phone to 4.0.4. If im guessing correctly, I would rename the file to update.zip, and before i modded my phone and after the factory reset I would install that zip onto the phone? I'm just slightly confused on the process
3. How do I uninstall a mod and go back to stock
4. How do I handle OTA updates? I know that with mods, I cant download the OTA automatically. I would guess i would have to uninstall the mod, download and install the update, and then thats where I dont know what to do
5. Is there a way to back up all my apps so when I install a mod or update a mod I can just have them all reinstalled back in and have all the settings restored, without having to download each individual app and change their settings back to what they were previously?
these are all the questions that come to mind presently. Some may arise later.
Thanks in advance, and if some of my questions have already been answered in a previous thread, can you guys just post a link to that thread?
Sent from my Transformer Prime TF201
You dl'ed android sdk yet or all the fastboot files you need?
Sent from my Galaxy Nexus using xda premium
You have it correct. Use titanium backup to save all your app data. And you have to restore a nand backup if you want to undo a mod you flashed. The mod usually instructs you to backup right before flashing, so you can just revert right back if you want.
I wouldn't worry about ota anymore. Being rooted always leads to you being able to flash the latest ota quicker than if you were stock and waiting for your number to be called. Trust me after years of this that's how it always happens.
corban227 said:
So ive been doing a lot of reading on rooting phones and the best way to go about doing this, but I still have a few questions about the whole process. First IM going to briefly write what I understand about the process and have it corrected and then ask my questions.
To root:
I will follow this guide http://forums.androidcentral.com/ve...ock-bootloader-root-verizon-galaxy-nexus.html
Basically I will make sure all drivers are updated on my computer (samsung and USB)
Use command prompt to unlock the boot loader and then install superboot for the GN
after this process is done and I reboot the phone I will be unlocked and ready to go
Modding
Done through CWM
1. I will download the mod that I want and place it in my phones internal memory.
2. boot into recovery mode with CWM
3. backup the phone with CWM (can anyone tell me where the back up is saved)
4. factory reset the phone
5. install zip from SD card (which will be the mod)
6. reboot back into recovery mode and install Gapps that I downloaded from the cryogen mod wiki through the "install zip from SD card" option. http://wiki.cyanogenmod.com/index.php?title=Latest_Version
7. Reboot phone and i will be good to go
SO my questions:
1. If i missed anything, can you guys quote my steps and add in what i left out in the correct order?
2. How do I update the phone to 4.0.4. If im guessing correctly, I would rename the file to update.zip, and before i modded my phone and after the factory reset I would install that zip onto the phone? I'm just slightly confused on the process
3. How do I uninstall a mod and go back to stock
4. How do I handle OTA updates? I know that with mods, I cant download the OTA automatically. I would guess i would have to uninstall the mod, download and install the update, and then thats where I dont know what to do
5. Is there a way to back up all my apps so when I install a mod or update a mod I can just have them all reinstalled back in and have all the settings restored, without having to download each individual app and change their settings back to what they were previously?
these are all the questions that come to mind presently. Some may arise later.
Thanks in advance, and if some of my questions have already been answered in a previous thread, can you guys just post a link to that thread?
Sent from my Transformer Prime TF201
Click to expand...
Click to collapse
There are some things that don't make sense in what you are doing.
1) Yes, you install the correct drivers;
2) Yes, you unlock your bootloader; however, if you want to save any data, it would be better if you root first (before unlocking your bootloader) -- see link in my sig, backup apps/etc. and even do a full backup. Don't forget to copy all of that OFF your device, as unlocking wipes even /sdcard.
3) If you are going to install a custom ROM, then there is no need to root the stock ROM you currently have, only to overwrite it with a custom ROM. Doesn't make sense.
4) If you are installing a custom ROM, you cannot "update" it to 4.0.4, unless the dev releases a 4.0.4 update for that particular ROM.
5) If you are sticking with the stock ROM, look at the link in my sig for either how to update to 4.0.4, or, better yet since you are unlocking your bootloader (which will wipe all your data anyway), flash the full 4.0.4 ROM.
6) OTA updates are only for stock ROMs.
7) You can use Titanium Backup once you are rooted to back up apps and app data.
efrant said:
There are some things that don't make sense in what you are doing.
1) Yes, you install the correct drivers;
2) Yes, you unlock your bootloader; however, if you want to save any data, it would be better if you root first (before unlocking your bootloader) -- see link in my sig, backup apps/etc. and even do a full backup. Don't forget to copy all of that OFF your device, as unlocking wipes even /sdcard.
3) If you are going to install a custom ROM, then there is no need to root the stock ROM you currently have, only to overwrite it with a custom ROM. Doesn't make sense.
4) If you are installing a custom ROM, you cannot "update" it to 4.0.4, unless the dev releases a 4.0.4 update for that particular ROM.
5) If you are sticking with the stock ROM, look at the link in my sig for either how to update to 4.0.4, or, better yet since you are unlocking your bootloader (which will wipe all your data anyway), flash the full 4.0.4 ROM.
6) OTA updates are only for stock ROMs.
7) You can use Titanium Backup once you are rooted to back up apps and app data.
Click to expand...
Click to collapse
What's the difference between a stock rom and a custom rom? I was looking at milestone 4. What is an example of a stock rom because I would prefer that to be able to still do ota updates.
Sent from my Galaxy Nexus
corban227 said:
What's the difference between a stock rom and a custom rom? I was looking at milestone 4. What is an example of a stock rom because I would prefer that to be able to still do ota updates.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
If you are asking that question, more reading is likely in order before you start flashing things.
But anyway: a stock ROM is the ROM Google puts out. They are found here, and instructions on how to flash are in my signature. All other ROMs are custom ROMs.
Gotcha. Ill look it up tonight
Sent from my Galaxy Nexus
I ended up reading more which lead to me unlocking and installing 4.0.4
Im happy with this now and I dont feel the need to custom mod. I need my phone to be functional all the time with out being too time consuming =D thanks for the help and leading me to my conclusion
I would seriously give aokp a try, I promise its worth it. Its the same as stock there's no extra work needed or anything to worry about or deal with. Its that good.
Id say stick with stock. I tried all the custom roms and while customisation options are good, nothing better than knowing your phone is 100 percent stable and secure with a locked bootloader.
biffsmash said:
Id say stick with stock. I tried all the custom roms and while customisation options are good, nothing better than knowing your phone is 100 percent stable and secure with a locked bootloader.
Click to expand...
Click to collapse
I wouldn't recommend re-locking your bootloader if you have unlocked it. Actually, I would recommend that, every time you buy a Nexus device, the first thing you should do is unlock the bootloader. Don't forget, having an unlocked bootloader does not mean you are not "stock". An unlocked bootloader doesn't affect anything (aside from what I mentioned below).
Why you ask? Good question:
Advantages of a locked bootloader
If you lose your device, no one can easily access your data, but only if, in addition to your bootloader being locked, you have the stock recovery installed AND you have USB Debugging disabled AND you have a password on your device. However, this "risk" (if you can call it that) can be mitigated by many apps that can remotely wipe your device.
Disadvantages of a locked bootloader
You cannot use fastboot commands, so you cannot flash or boot images, which can save your butt in certain occasions.
You cannot try out new radios (assuming no root).
You cannot backup your data (i.e., make an image of your device's memory (assuming no root).
You cannot root (on 4.0.4 and later).
You cannot manually update to the latest version of Android once Google starts rolling it out. You have to wait until Google decides it's your turn, which could be minutes to months after the update becomes available.
+1 to working without me thinking. I'm leaving the boot loader unlocked to install any updates Verizon doesn't push through but other than that its staying stock. Plus I really like vanilla ICS AS IT IS
Sent from my Transformer Prime TF201 using Tapatalk 2
hello, i just got my first android phone so I'm new to this sort of stuff, though I love being able to unlock hidden potential of different devices, so naturally I discovered the ability to root smart phones and all that good stuff.
The model I have is the Samsung Galaxy Gio GT-S5660M. It's running 2.3.4. Gingerbread version.
I've been reading a lot of guides and for the most part rooting and adding additional utilities like flash, etc. seems pretty simple. However, I have not yet been able to find out how to create a back of up of my stock firmware when I bought the phone in case I end up bricking it, or decide I want to return to stock.
I've read many guides that claim to show how to create back ups and recovery points, but I'm still having trouble understanding it.
To be more specific, I would like to create as opposed to download, a back up of the phone in it's current state which is, as I said earlier, stock. I did a factory reset since I had some stuff installed while I was fiddling with it for the first time.
thx
You have to root it before you can back up stock rom so, firstly you root it (you can find guides here on xda)
Then install clockworkmod recovery: warning: DON'T EVER USE ROM MANAGER TO INSTALL CLOCKWORKMOD ON YOUR GIO, IT WILL BRICK YOUR PHONE!! use one of the recoveries found in xda, you will also find guides to install them there.
Then third; backup in clockworkmod using "backup and restore"
Sent from my GT-S5660
iok1 said:
You have to root it before you can back up stock rom so, firstly you root it (you can find guides here on xda)
Then install clockworkmod recovery: warning: DON'T EVER USE ROM MANAGER TO INSTALL CLOCKWORKMOD ON YOUR GIO, IT WILL BRICK YOUR PHONE!! use one of the recoveries found in xda, you will also find guides to install them there.
Then third; backup in clockworkmod using "backup and restore"
Sent from my GT-S5660
Click to expand...
Click to collapse
so first of all, what I'm looking for is called a ROM right?
what I don't get though is how come I need to modify the device before creating the backup. Isn't the phone modified at that point? Or is the stock configuration being stored somewhere on the phone that I can't see without clockwork?
You cannot create a backup without the recovery mod CWM Clockwork Recovery Mod. But to install this you need your device rooted (modified so you can modify and view system files)
gfyrdr said:
so first of all, what I'm looking for is called a ROM right?
what I don't get though is how come I need to modify the device before creating the backup. Isn't the phone modified at that point? Or is the stock configuration being stored somewhere on the phone that I can't see without clockwork?
Click to expand...
Click to collapse
1 - you don't need to search for a rom to backup your stock rom
2 - you need to root your phone in order to be able to backup your rom
3 - you need to install a more advanced recovery (program "similar" to pc BIOS) in order to do a nandroid backup
4 - after you flash that more advanced recovery (aka CWM -> ClockWorkMod), you backup your rom in "backup and restore" menu, backup. It will then store your rom in a folder.
5 - you should strongly consider after that, to install a custom rom made by many of the devs here on XDA in order to have a better experience with your phone...
0M3G4_ said:
1 - you don't need to search for a rom to backup your stock rom
2 - you need to root your phone in order to be able to backup your rom
3 - you need to install a more advanced recovery (program "similar" to pc BIOS) in order to do a nandroid backup
4 - after you flash that more advanced recovery (aka CWM -> ClockWorkMod), you backup your rom in "backup and restore" menu, backup. It will then store your rom in a folder.
5 - you should strongly consider after that, to install a custom rom made by many of the devs here on XDA in order to have a better experience with your phone...
Click to expand...
Click to collapse
+1 That was what I wanted to say
I've already uploaded a stock ROM backup last fall of the same Gingerbread ROM you're running, along with instructions on how to make one yourself or flash mine.
The best advice I can give you is: research, research, and more research.
Good luck,
Darkshado
Sent from my Nexus S using XDA
What software do you recommend to clockworkmod Gio with?
s!mon said:
What software do you recommend to clockworkmod Gio with?
Click to expand...
Click to collapse
I use px-cwm-v2.zip recovery.
You flash it using stock recovery.
thx for the replies. I will give it a try.
Darkshadow, whats the thread's name where you posted the ROM and instructions? I'd like to check that out too.
Also, whats a good rom to consider upgrading to? Something that has the ability to play flash videos.
EDIT:
If I understand correctly, roms are basically whole operating systems that have been customized by the developer. So a rom can be already rooted and have clockwork as well as other custom stuff, and I just need to flash it. The alternative to this is to do everything manualy... root the current OS, add clockwork and whatever else. Correct?
Also, I'm not sure yet if a rooted phone has any extra options on it's own, or if it's only a set up that's sole purpose is to allow other applications to be installed who then will give the user better control over his device.
I've run into a little problem.
I'm following this guide: http://forum.xda-developers.com/showpost.php?p=16963172&postcount=1
I've got Odin and the tar downloaded, but when I go into download mode with my phone and connect it to the PC, it says that the device driver was not successfuly installed, and I get no confirmation in Odin that a connection has been made between the phone and the program.
What am I missing?
Thx.
EDIT:
Nevermind, I needed to install Kies. Don't even need to run it. Apparently it has the driver that's needed.
Okay, I've rooted my phone successfully. Now the next step is to install Clockwork and create a back up.
Now that I understand a little bit the way Odin and flashing ROM works, I think it would be better to just download a stock ROM and in case something goes wrong, I can just flash it the way I flashed the rooted one.
(I think I saw a completely stock ROM somewhere for my model but I don't remember where. A link would be appreciated if it exists.)
Correct me if I'm wrong pls.
Also, if I do that, then is there any reason to install Clockwork since I've read that many ppl have issues with installing it and it's riskier than rooting or installing other software.
Right now I think what I'm most interested in is installing Adobe Flash Player 11 or something of the sort that can play flash videos and streams.
^
http://forum.xda-developers.com/showpost.php?p=19623732&postcount=1
taken from the sticky
i'm also thinking of installing cwm
looking at the sticky, http://forum.xda-developers.com/showpost.php?p=20397988&postcount=8
how outdated is this cwm?
I'm using Opera as my browser so from what I've learned, flash doesn't work with it period. Is skyfire a good alternative?
Also, like I said, I don't think I need the clockwork if I can get a clean stock ROM that I can just flash if something goes wrong. As I don't intend to download many apps or add many phone numbers (memorized instead), a backup isn't really needed.
nvmd, i just went ahead and installed the cwm in that link, there's a 5.0.2.7 though if that is even the newest one
now, i cant seem to backup my phone
it says it cannot mount /system
try dolphin browser
anonxlg said:
nvmd, i just went ahead and installed the cwm in that link, there's a 5.0.2.7 though if that is even the newest one
now, i cant seem to backup my phone
it says it cannot mount /system
try dolphin browser
Click to expand...
Click to collapse
Did you pick the ext4 + rfs version?
Sent from my GT-S5660
Clockwork is not riskier than other things you do. Just follow steps and you see no problems.
anonxlg said:
^
http://forum.xda-developers.com/showpost.php?p=19623732&postcount=1
i'm also thinking of installing cwm
looking at the sticky, http://forum.xda-developers.com/showpost.php?p=20397988&postcount=8
how outdated is this cwm?
Click to expand...
Click to collapse
its an older version, its 5.0.2.7, theres also 5.0.2.8 but these give some problems after installing/wiping, so some people still use the older version.
Hello guys,
I'm new here. I have the same problem as anonxlg. It says can't mount system. I also used the version from the big thread for new users. Can anyone enlighten me on what to do? I've been searching the forum and google, but can't make it work. I feel like a compleet noob now, and I don't feel special about it.
RJ88
Edit: I kept searching, and finally found a working 5.0.2.7 version. First I had another 5.0.2.7 version, but when I tried to install it didn't work. I finally found "signed_cwm-5.0.2.7-flashablezip-ext4+rfs.zip (Flash from Recovery)" on http://forum.xda-developers.com/showthread.php?t=1421650 (through google actually. I have to get used to this site), and I'm making my backup now.
thanks RJA88, backup worked
edit/update
i used the cwm linked and backup worked, i tried installing cm9 beta8 (galaxyics), and it would get stuck after samsung bootscreen (it flashes a white pick or soemthing before full back screen)
i tried restoring backup i made, and it didnt work, some mount error again
i reverted back to 5.0.2.6 and did the restore backup again, and this time it goes up the the galaxy gio gt5660m screen and just stop..
note that i do not know what the rfs/ext4 is for for the gio if that is what is causing problems
i have a droid x2 that i have rooted and switched roms on numerous times, as well as sbfing becoming one of my close friends. not sure what to do with the 3 different pages on rooting applications and methods. does a link to actual step by step instructions on how to root and intall roms exist? last night i rooted and installed twrp using the utility, but could not get it to boot for anything. held power down and all i get is a normal boot . when i went to install AOKP , i used the utility to get into twrp RIGHT after putting FFF on it. i flashed the rom and gapps after wiping data, and i got a blank screen for an hour. i found a tutorial on mounting sd card through twrp and saved it. my question is what is the proper way to root 6.2.2? and will installing roms through working twrp actualy work? if so how do i get twrp to work? thanks in advance guys.
clarity
just to clarify , i have read all of the guides on here and have a bsic understanding (not much) of fastboot and adb. does this device need adb things done to it to work? <--- third question...lol
I used the kindle fire utility. It is a little more complicated than other devices I have rooted/rommed, but not impossible. http://forum.xda-developers.com/showthread.php?t=1399889 is the thread for KFU. You install it on your computer and follow the instructions. I soft bricked mine because I wasn't paying attention and flashed the wrong bootloader, if something like that happens there is another utility for unbrick.
Sent from my Galaxy Nexus using xda premium
Lorenzo VonMatterhorn said:
just to clarify , i have read all of the guides on here and have a bsic understanding (not much) of fastboot and adb. does this device need adb things done to it to work? <--- third question...lol
Click to expand...
Click to collapse
Yes, you use adb but it instructs you what to type.
Sent from my Galaxy Nexus using xda premium
pyroscott said:
I used the kindle fire utility. It is a little more complicated than other devices I have rooted/rommed, but not impossible. http://forum.xda-developers.com/showthread.php?t=1399889 is the thread for KFU. You install it on your computer and follow the instructions. I soft bricked mine because I wasn't paying attention and flashed the wrong bootloader, if something like that happens there is another utility for unbrick.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
i used the utility for my first blunder on this device. is the first step install permanent root? thats what i did first. then install latest twrp. did that second. said it was installed, unplugged from my computer and tried to boot into twrp. nothing. from off just hitting power sould show the triangle sign correct? if so i dont even get this.
Yes the first step should be root... which in my case also installs twrp...
If you're planning to install a custom ROM, there's no point in rooting. FFF and TWRP are more than enough.
aokp
ok well i rooted. and now twrp works flawlessly. but when i try to flash aokp, i wipe data/factory reset, install aokp and then gapps, i get nothing but a black screen after rebooting. after waiting a minute or two, i rebooted into recovery and restored a backup. am i doing something wrong? i started on 6.2.2 if that helps at all.
You should -always- wipe cache and dalvik-cache when flashing ROMs.
When you're upgrading the same ROM from a lower version to a newer one (for example, going from gede 1.65 to 1.7) you may skip factory reset, so long as there isn't a major change (going from normal to linaro, for example).
However, it is good practice to let Titanium Backup handle all of your /data backups and just factory reset every time as well.
You have the two most important steps done.
1. You have TWRP installed and you can boot into it. That is one of the hardest steps it appears.
2. You did a backup before doing anything else.
As Dasanko said you also need to wipe cache and dalvik-cache. When I do a new rom I wipe data, system, cache and dalvik-cache.
Titanium Backup (TiBu) is also awesome to restore your apps. However, you will need to install TiBu to use it to restore other apps. Some ROMS have it installed already and some don't. If you don't have access to TiBu from the Rom your are flashing you will need the GApps installed to get the Play Store. You can then download TiBu be able to restore your chosen apps.
Lorenzo VonMatterhorn said:
i used the utility for my first blunder on this device. is the first step install permanent root? thats what i did first. then install latest twrp. did that second. said it was installed, unplugged from my computer and tried to boot into twrp. nothing. from off just hitting power sould show the triangle sign correct? if so i dont even get this.
Click to expand...
Click to collapse
Yes, you should get the screen with the triangle. I would try flashing the recovery again
Sent from my Galaxy Nexus using xda premium
also when you are installing a new rom I always wipe system so you dont have any errors because that is where the old rom is located. btw cm9 and aokp are both really nice on this device
Hello again, I recently got the push for update from device for the 4.1.1 with the mb1 and had TWRP and when I accepted it it booted to recovery and then nothing. So I went to Rom Manager app then updated to the CWM 6.0.3.0 regular no touch then tried to get into recovery and instead got the yellow triangle so then I had to pull battery because it was in odin download mode so no way out unless cut power. When I rebooted I got the update message again then accepted what the heck, it gave me a count down of 700 sec then in went to recovery with the android i believe CWM 6.0.3.0 and it took the official update from Sprint only to find out later on I have no root after checking with root checker app and trying to boot to recovery.
So my million dollar question is now what. I downloaded the [SAMSUNG GALAXY S3 UNIFIED TOOLKIT V7.0] Drivers, Backup, Root, Recovery + MORE [SPR] but only supports 4.1.1 and I dont know if its safe to Root 4.1.2 which is not listed unless I donate but not even sure if its supported otherwise I would donate.
How do I regain Root access the easiest way?
[2013.02.20][SPH-L710] CF-Auto-Root
http://forum.xda-developers.com/showthread.php?t=1963812
or
[SAMSUNG GALAXY S3 UNIFIED TOOLKIT V7.0]
http://forum.xda-developers.com/showthread.php?t=1746680
or other way to bring back super su, root, cmw, adb ,and all the goodies?
Thanks again m8's
Lanboy
=)
lanboy said:
Hello again, I recently got the push for update from device for the 4.1.1 with the mb1 and had TWRP and when I accepted it it booted to recovery and then nothing. So I went to Rom Manager app then updated to the CWM 6.0.3.0 regular no touch then tried to get into recovery and instead got the yellow triangle so then I had to pull battery because it was in odin download mode so no way out unless cut power. When I rebooted I got the update message again then accepted what the heck, it gave me a count down of 700 sec then in went to recovery with the android i believe CWM 6.0.3.0 and it took the official update from Sprint only to find out later on I have no root after checking with root checker app and trying to boot to recovery.
So my million dollar question is now what. I downloaded the [SAMSUNG GALAXY S3 UNIFIED TOOLKIT V7.0] Drivers, Backup, Root, Recovery + MORE [SPR] but only supports 4.1.1 and I dont know if its safe to Root 4.1.2 which is not listed unless I donate but not even sure if its supported otherwise I would donate.
How to I regain Root access the easiest way?
[2013.02.20][SPH-L710] CF-Auto-Root
http://forum.xda-developers.com/showthread.php?t=1963812
or
[SAMSUNG GALAXY S3 UNIFIED TOOLKIT V7.0]
http://forum.xda-developers.com/showthread.php?t=1746680
or other way to bring back super su, root, cmw, adb ,and all the goodies?
Thanks again m8's
Lanboy
=)
Click to expand...
Click to collapse
Ok, I'm going to answer your question.
First off, I'd recommend looking through CNexus' sticky thread about OTAs (always good to look through the stickies before you post). You'll see exactly why your OTA is failing.
Since you say that you are able to boot into CWM, I'm going to assume that you've done your Odin work. I would recommend going through it again, based on qbking77's thread. Check out the videos and learn how to use Odin to gain root and a custom recovery. (always good to take a refresher course).
Now that you have CWM and have rooted through Odin, you will not be able to update using the OTAs from Sprint(again, look through CNexus' thread).
This is not a bad thing, as Freeza always releases an updated Stock Rooted Rom based on the most recent OTA (normally he gets it done before a number of people, myself included, even get the OTA notification).
I'll give directions on how to flash a Rom below. The instructions will be for TWRP, but CWM has similar options/settings
Turn your phone completely off (hold down power for 3-5 seconds)
Boot your phone into recovery. Hold Up, Menu, and Power for a few seconds (until SAMSUNG appears on your screen and the phone vibrates)
Make a Nandroid backup. I can't emphasize this enough. In flashing, it's almost a certainty that one time, something will mess up. When that happens, you want to be able to restore a backup. In TWRP, just go into Backup Menu and choose where you want it (internal vs. External storage). It takes my phone a few (5-10) minutes to completely backup my data.
In TWRP, click the wipe button, then system. This will completely wipe the Rom from your phone. Doing this will allow you to get a "clean" install, without any settings or leftover files from your old Rom getting in the way. Instead, you could only wipe data (factory reset), which is good enough for most Roms. I'd still recommend a system wipe, though.
Also while in the Wipe menu, wipe Cache and Dalvik Cache.
Go back to the TWRP main menu.
Click Install, then find your Rom zip file (may have to switch from internal to external storage).
Let TWRP do it's thing.
If you're installing a TW-based Rom, chances are it had gapps already installed. If not, you should now flash the correct gapps package from goo.im. Make sure you're flashing the correct one, as if you don't, your google apps will force close upon use.
Reboot into system and give it time to boot (first boot sometimes takes a couple of minutes).
Set up your phone the way you like.
These should be the directions to follow whenever you flash a new Rom. Some Roms have the Aroma installer, so you'll have more options once you choose to flash the Rom zip, but those are typically easy to follow (and vary from Rom to Rom, so I won't be able to give you a good guide on that).
Hope this helps!
Wow! Just had to come out and say, nice writeup!
CNexus said:
Wow! Just had to come out and say, nice writeup!
Click to expand...
Click to collapse
Thanks, CNexus. By-the-way, I'm still working on the addition to your sticky I promised... I haven't forgotten about it.
topherk said:
Thanks, CNexus. By-the-way, I'm still working on the addition to your sticky I promised... I haven't forgotten about it.
Click to expand...
Click to collapse
No problemo, take your time :good:
So its better to use qbkings method instead of [SAMSUNG GALAXY S3 UNIFIED TOOLKIT V7.0]
read this abouy 4.1.2 rooting afterwards, great news...
Originally Posted by Ramer84015
I am on stock recovery and my phone has been updated to v4.1.2 (MB1). Have the files in the OP been updated, or does it matter to get root?
The files will still work exactly the same. Follow the instructions, and you'll be good.
I remember now I used qbking's method had the files in phone TeamEpic-Root-from-Recovery-v5.zip
Thanks for the heads up I got scared after updating but read If you take OTA then you will lose ROOT. This is normal what I don't get is how I was able to get OTA with CWM and not TWRP, but I read somewhere some ppl were able to take the OTA with CWM.
Thanks M8's for coming though in the clutch... now to ROOT my moms Samsung Galaxy Tab2...
Lanboy
=)
Always better to root the right way than using a tool kit, one wrong choice in a tool kit and you have an international brick worth 600 dollars.
Transmitted with a portable device using Xparent Blue Tapatalk 2
Hi,
I'm new here so please go easy on this "noob"
It was my first to unlock and root my phone, followed by flashing a stock ROM (Which is exactly why I rooted it)
I flashed this JB 4.2.2 stock build [ROM] [OTA][GSM] Android 4.2.2 JDQ39: Rooted | Galaxy Nexus > XDA for my Galaxy Nexus
Now...
I can't disable Next-word suggestions in the Language & Input -> Google Keyboard Settings
Also, I noticed a few seconds of lag when pressing the power button to unlock the phone, when viewing recent apps (via the soft-key), and when opening the Camera too
Also, when I choose the "Recent Apps" soft key.. it's as the app that's currently being used is minimised and the homescreen is shown without any icons
The Build came with Busybox pre-installed and now its gone after a day of using my phone... I literally can't find it.
I searched in the play store "BusyBox" and the result is 3 different apps with the same name!
Any Advice?
AMKhatri said:
Hi,
I'm new here so please go easy on this "noob"
It was my first to unlock and root my phone, followed by flashing a stock ROM (Which is exactly why I rooted it)
I flashed this JB 4.2.2 stock build [ROM] [OTA][GSM] Android 4.2.2 JDQ39: Rooted | Galaxy Nexus > XDA for my Galaxy Nexus
Now...
I can't disable Next-word suggestions in the Language & Input -> Google Keyboard Settings
Also, I noticed a few seconds of lag when pressing the power button to unlock the phone, when viewing recent apps (via the soft-key), and when opening the Camera too
Also, when I choose the "Recent Apps" soft key.. it's as the app that's currently being used is minimised and the homescreen is shown without any icons
The Build came with Busybox pre-installed and now its gone after a day of using my phone... I literally can't find it.
I searched in the play store "BusyBox" and the result is 3 different apps with the same name!
Any Advice?
Click to expand...
Click to collapse
go back to recovery, format/wipe /system partition, reflash rom.
For your reference, a good app to install bb is stephen (stericsson)'s busybox installer (play store link). Obviously, it needs root.
Next time, read the stickies.
http://forum.xda-developers.com/showthread.php?t=1812959
How do I get “root”?
If you are booted into a custom recovery (recoveries will be covered later), root is enabled by default. If you want root while booted into Android, you will need to place two files on your system partition: an “su” binary which grants root access, and a superuser app that manages that access. The two that are available are ChainsDD’s Superuser and Chainfire’s SuperSU. Usually these files are packaged up in a zip file that is flashable using a custom recovery, but they can be flashed manually using ADB. Both of these methods will be described below.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=26328017&postcount=123
As you probably noticed by now, you didn't need to flash a full "custom stock ROM" to root.
beekay201 said:
go back to recovery, format/wipe /system partition, reflash rom.
For your reference, a good app to install bb is stephen (stericsson)'s busybox installer (play store link). Obviously, it needs root.
Next time, read the stickies.
http://forum.xda-developers.com/showthread.php?t=1812959
http://forum.xda-developers.com/showpost.php?p=26328017&postcount=123
As you probably noticed by now, you didn't need to flash a full "custom stock ROM" to root.
Click to expand...
Click to collapse
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PS: Do you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
AMKhatri said:
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PSo you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
Click to expand...
Click to collapse
You can wipe the system partition in a custom recovery (dont know if you can with stock). And yes you could flash via ROM manager but I wouldnt recommend it. I am on XenonHD 11.1 and loving it. But roms are a personal choice so there is no 'best' ROM. Just try out.
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
You can wipe the system partition in a custom recovery (dont know if you can with stock). And yes you could flash via ROM manager but I wouldnt recommend it. I am on XenonHD 11.1 and loving it. But roms are a personal choice so there is no 'best' ROM. Just try out.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
The tutorial I followed didn't mention using the ROM manager, but I had not choice.. becuase whenever I went into fastboot mode manually, it got stuck on the screen displaying Google (I waited for minutes without any luck)
How would you recommend CyanogenMod 10.1.2 against the stock 4.2.2 which I have currently?
I read these threads as well whereby they said that there is no "real" solution to the issues:
http://forum.xda-developers.com/showthread.php?t=2178962
http://forum.xda-developers.com/showthread.php?t=2363872
AMKhatri said:
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PS: Do you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
Click to expand...
Click to collapse
Mr., please, read the LINK i gave you! THIS ONE ->>>> http://forum.xda-developers.com/showthread.php?t=1812959
If you read it, you'll stop thinking you need to be doing anything at this point in FASTBOOT interface! Like mrgnex says, you need to be on a custom recovery to format /system. (Have you read the link yet? By now you should know that the /system partition and the /sdcard/ (aka userdata) are 2 different things!)
mrgnex said:
You can wipe the system partition in a custom recovery (dont know if you can with stock). (...) roms are a personal choice so there is no 'best' ROM. Just try out.
Click to expand...
Click to collapse
+1
For your reference, you can't erase /system in stock recovery.
AMKhatri said:
The tutorial I followed didn't mention using the ROM manager, but I had not choice.. becuase whenever I went into fastboot mode manually, it got stuck on the screen displaying Google (I waited for minutes without any luck)
How would you recommend CyanogenMod 10.1.2 against the stock 4.2.2 which I have currently?
I read these threads as well whereby they said that there is no "real" solution to the issues:
http://forum.xda-developers.com/showthread.php?t=2178962
http://forum.xda-developers.com/showthread.php?t=2363872
Click to expand...
Click to collapse
Stop! THERE'S NO NEED FOR FASTBOOT HERE!
Thanks Guys for replying.
Yes, I read the info in the link, it was very helpful.
I'm still confused though.. "Fast boot" and "Recovery" are they the same thing?
I tried a "fix" mentioned by someone about using a live wallpaper such as "Water", I tried it and it's been 1/2 hour and it's really smooth compared to before...
Yes, I do have a custom recovery, actually I don't know why, but It seems I've got two according to ROM Manager.
It says I've got Clockwork Mod Recovery & TWRP.
I also tried going into recovery (Volume up + Down + Power) and it worked this time, when I select recovery, it goes into CWRM
I also did a bit of research about CyanogenMod 10.1.2 and from what I could gather it's liked by people a lot.
I'm guessing that definitely some time ahead it'll get all "laggy" again, Is there any reason according to you why I shouldn't install it compared to the stock 4.2.2 I have?
AMKhatri said:
Thanks Guys for replying.
Yes, I read the info in the link, it was very helpful.
I'm still confused though.. "Fast boot" and "Recovery" are they the same thing?
I tried a "fix" mentioned by someone about using a live wallpaper such as "Water", I tried it and it's been 1/2 hour and it's really smooth compared to before...
Yes, I do have a custom recovery, actually I don't know why, but It seems I've got two according to ROM Manager.
It says I've got Clockwork Mod Recovery & TWRP.
I also tried going into recovery (Volume up + Down + Power) and it worked this time, when I select recovery, it goes into CWRM
I also did a bit of research about CyanogenMod 10.1.2 and from what I could gather it's liked by people a lot.
I'm guessing that definitely some time ahead it'll get all "laggy" again, Is there any reason according to you why I shouldn't install it compared to the stock 4.2.2 I have?
Click to expand...
Click to collapse
So to get things clear:
No fastboot and recovery arent the same thing.
Vol up+down+power brings you into fast boot and not recovery.
Apparently you dont have 2 custom recoverys since you booted into cwm.
Cm10 is great. But there are many great roms out there. You can start off with cm and then (if you please) look further.
I dont see any reason to not install cm10.1.2 since a whole team built and optimized it. So basically it is a better stock.
When you think your phone is slow you should look into the custom kernels. Thats a different story which I will not begin before you want to
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
So to get things clear:
No fastboot and recovery arent the same thing.
Vol up+down+power brings you into fast boot and not recovery.
Apparently you dont have 2 custom recoverys since you booted into cwm.
Cm10 is great. But there are many great roms out there. You can start off with cm and then (if you please) look further.
I dont see any reason to not install cm10.1.2 since a whole team built and optimized it. So basically it is a better stock.
When you think your phone is slow you should look into the custom kernels. Thats a different story which I will not begin before you want to
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Thanks! Now it's definitely clear!
I'll download CM10.1.2 tomorrow and will decide to install it once Stock JB 4.2.2 starts acting up again.
In the meantime I'll read on about kernels, please keep don't close this thread...yet.
clerk usdEuro
I've decided that I will test out the Rom that I have currently (4.2.2) for a few weeks, and then flash CM.
I wanted to know one more thing, Is it bad to flash ROMs to your phone every now and then?
Because I've seen people flashing different ROMs on their phone, I don't wanna damage my phone as I want it to last as long as I can make it.
(by "Bad" I mean... does it reduce the phone's life or it's hardware's life span)
AMKhatri said:
I've decided that I will test out the Rom that I have currently (4.2.2) for a few weeks, and then flash CM.
I wanted to know one more thing, Is it bad to flash ROMs to your phone every now and then?
Because I've seen people flashing different ROMs on their phone, I don't wanna damage my phone as I want it to last as long as I can make it.
(by "Bad" I mean... does it reduce the phone's life or it's hardware's life span)
Click to expand...
Click to collapse
No it can't. I was a flashaholic (until I discovered XenonHD) and my phone didn't got worse. Only overclocking the CPU and gpu can affect the life of the CPU or gpu (or both XD). Just do a fresh install everytime and read the post of the ROM of your choice to see what to do to get it working optimally. If you have any problems just ask.
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
No it can't. I was a flashaholic (until I discovered XenonHD) and my phone didn't got worse. Only overclocking the CPU and gpu can affect the life of the CPU or gpu (or both XD). Just do a fresh install everytime and read the post of the ROM of your choice to see what to do to get it working optimally. If you have any problems just ask.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Thanks...
I'll flash CM in a week or two, as I'm on a tight schedule currently, and I also wanna note down the average battery time I get out of 4.2.2
So... since 4.3 is now out, I was thinking it'd be better for me to flash it other than anything else.
I'll most probably download the stock rom from:
https://developers.google.com/android/nexus/images#yakjujwr66v
So far I came across this thread having the steps to flash 4.3
http://forum.xda-developers.com/showthread.php?t=2377307
But I wanna flash it and lose my data, so that it's as fresh as it can be...
Will that work if I use "wugfresh root toolkit"?
AMKhatri said:
So... since 4.3 is now out, I was thinking it'd be better for me to flash it other than anything else.
I'll most probably download the stock rom from:
https://developers.google.com/android/nexus/images#yakjujwr66v
So far I came across this thread having the steps to flash 4.3
http://forum.xda-developers.com/showthread.php?t=2377307
But I wanna flash it and lose my data, so that it's as fresh as it can be...
Will that work if I use "wugfresh root toolkit"?
Click to expand...
Click to collapse
With the stock package there is no need for a toolkit.
Hell, there's no reason for a toolkit any time.
Sent from my Galaxy Nexus
Pirateghost said:
With the stock package there is no need for a toolkit.
Hell, there's no reason for a toolkit any time.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
What was I thinking...
I apologize guys... I guess I wasn't thinking straight as its past midnight here...
So just to clarify stuff so that I don't end up doing something wrong:
-> Head into Recovery Mode (with usb debugging enabled... connect usb cable to phone and pc)
-> Wipe System
-> Wipe Cache
-> Install from SD card (select .zip file)
right?
Also, I performed a backup of the applications I have via Titanium Backup, They'll work on 4.3 when I restore them right? or do you recommend downloading them from the play store again?
Sorry for being such a noob, and Thanks for your responses!
backup everything from your /sdcard to your computer, titanium backups and a nandroid
the google stock package is NOT flashable in CWM/TWRP
if you follow the GOOGLE instructions it WILL wipe your device (remember that backup you made of everything?)
alternatively you can make sure and have adb/fastboot working on your computer properly, extract all the files out of the zip (including the tar.gz located inside), and in recovery, do a factory reset, then boot to fastboot, fastboot flash system and boot ....
as for Titanium Backup, there is a work around to get it working on 4.3, but root is lacking full power.
Pirateghost said:
backup everything from your /sdcard to your computer, titanium backups and a nandroid
the google stock package is NOT flashable in CWM/TWRP
if you follow the GOOGLE instructions it WILL wipe your device (remember that backup you made of everything?)
alternatively you can make sure and have adb/fastboot working on your computer properly, extract all the files out of the zip (including the tar.gz located inside), and in recovery, do a factory reset, then boot to fastboot, fastboot flash system and boot ....
as for Titanium Backup, there is a work around to get it working on 4.3, but root is lacking full power.
Click to expand...
Click to collapse
Thanks!
I'm now on Android 4.3
I'm full of excitement atm :victory:
I took a backup of my apps using titanium backup, I installed it but can't use it, it says I need root (which I already had before).
I read online somewhere that I need to root again, but I don't wanna lose all my data/ apps I installed again...
Any ideas?
If I use Wugfresh Nexus Root Toolkit... will I lose my data?
Thanks for the continued support!
AMKhatri said:
Thanks!
I'm now on Android 4.3
I'm full of excitement atm :victory:
I took a backup of my apps using titanium backup, I installed it but can't use it, it says I need root (which I already had before).
I read online somewhere that I need to root again, but I don't wanna lose all my data/ apps I installed again...
Any ideas?
If I use Wugfresh Nexus Root Toolkit... will I lose my data?
Thanks for the continued support!
Click to expand...
Click to collapse
Seriously, how hard can it be for you people to waste 5, 5!!! minutes to browse the forums.
http://forum.xda-developers.com/showthread.php?t=2377318
Thanks!
According to a friend's recommendation I used Wugfresh Nexus Root Toolkit to Root, and surprisingly didn't lose any of my data!
Once again, Thanks for all the help everyone... You've all been quite helpful.