Rooting and Modding questions. Final Check - Samsung Galaxy Nexus

So ive been doing a lot of reading on rooting phones and the best way to go about doing this, but I still have a few questions about the whole process. First IM going to briefly write what I understand about the process and have it corrected and then ask my questions.
To root:
I will follow this guide http://forums.androidcentral.com/ve...ock-bootloader-root-verizon-galaxy-nexus.html
Basically I will make sure all drivers are updated on my computer (samsung and USB)
Use command prompt to unlock the boot loader and then install superboot for the GN
after this process is done and I reboot the phone I will be unlocked and ready to go
Modding
Done through CWM
1. I will download the mod that I want and place it in my phones internal memory.
2. boot into recovery mode with CWM
3. backup the phone with CWM (can anyone tell me where the back up is saved)
4. factory reset the phone
5. install zip from SD card (which will be the mod)
6. reboot back into recovery mode and install Gapps that I downloaded from the cryogen mod wiki through the "install zip from SD card" option. http://wiki.cyanogenmod.com/index.php?title=Latest_Version
7. Reboot phone and i will be good to go
SO my questions:
1. If i missed anything, can you guys quote my steps and add in what i left out in the correct order?
2. How do I update the phone to 4.0.4. If im guessing correctly, I would rename the file to update.zip, and before i modded my phone and after the factory reset I would install that zip onto the phone? I'm just slightly confused on the process
3. How do I uninstall a mod and go back to stock
4. How do I handle OTA updates? I know that with mods, I cant download the OTA automatically. I would guess i would have to uninstall the mod, download and install the update, and then thats where I dont know what to do
5. Is there a way to back up all my apps so when I install a mod or update a mod I can just have them all reinstalled back in and have all the settings restored, without having to download each individual app and change their settings back to what they were previously?
these are all the questions that come to mind presently. Some may arise later.
Thanks in advance, and if some of my questions have already been answered in a previous thread, can you guys just post a link to that thread?
Sent from my Transformer Prime TF201

You dl'ed android sdk yet or all the fastboot files you need?
Sent from my Galaxy Nexus using xda premium

You have it correct. Use titanium backup to save all your app data. And you have to restore a nand backup if you want to undo a mod you flashed. The mod usually instructs you to backup right before flashing, so you can just revert right back if you want.
I wouldn't worry about ota anymore. Being rooted always leads to you being able to flash the latest ota quicker than if you were stock and waiting for your number to be called. Trust me after years of this that's how it always happens.

corban227 said:
So ive been doing a lot of reading on rooting phones and the best way to go about doing this, but I still have a few questions about the whole process. First IM going to briefly write what I understand about the process and have it corrected and then ask my questions.
To root:
I will follow this guide http://forums.androidcentral.com/ve...ock-bootloader-root-verizon-galaxy-nexus.html
Basically I will make sure all drivers are updated on my computer (samsung and USB)
Use command prompt to unlock the boot loader and then install superboot for the GN
after this process is done and I reboot the phone I will be unlocked and ready to go
Modding
Done through CWM
1. I will download the mod that I want and place it in my phones internal memory.
2. boot into recovery mode with CWM
3. backup the phone with CWM (can anyone tell me where the back up is saved)
4. factory reset the phone
5. install zip from SD card (which will be the mod)
6. reboot back into recovery mode and install Gapps that I downloaded from the cryogen mod wiki through the "install zip from SD card" option. http://wiki.cyanogenmod.com/index.php?title=Latest_Version
7. Reboot phone and i will be good to go
SO my questions:
1. If i missed anything, can you guys quote my steps and add in what i left out in the correct order?
2. How do I update the phone to 4.0.4. If im guessing correctly, I would rename the file to update.zip, and before i modded my phone and after the factory reset I would install that zip onto the phone? I'm just slightly confused on the process
3. How do I uninstall a mod and go back to stock
4. How do I handle OTA updates? I know that with mods, I cant download the OTA automatically. I would guess i would have to uninstall the mod, download and install the update, and then thats where I dont know what to do
5. Is there a way to back up all my apps so when I install a mod or update a mod I can just have them all reinstalled back in and have all the settings restored, without having to download each individual app and change their settings back to what they were previously?
these are all the questions that come to mind presently. Some may arise later.
Thanks in advance, and if some of my questions have already been answered in a previous thread, can you guys just post a link to that thread?
Sent from my Transformer Prime TF201
Click to expand...
Click to collapse
There are some things that don't make sense in what you are doing.
1) Yes, you install the correct drivers;
2) Yes, you unlock your bootloader; however, if you want to save any data, it would be better if you root first (before unlocking your bootloader) -- see link in my sig, backup apps/etc. and even do a full backup. Don't forget to copy all of that OFF your device, as unlocking wipes even /sdcard.
3) If you are going to install a custom ROM, then there is no need to root the stock ROM you currently have, only to overwrite it with a custom ROM. Doesn't make sense.
4) If you are installing a custom ROM, you cannot "update" it to 4.0.4, unless the dev releases a 4.0.4 update for that particular ROM.
5) If you are sticking with the stock ROM, look at the link in my sig for either how to update to 4.0.4, or, better yet since you are unlocking your bootloader (which will wipe all your data anyway), flash the full 4.0.4 ROM.
6) OTA updates are only for stock ROMs.
7) You can use Titanium Backup once you are rooted to back up apps and app data.

efrant said:
There are some things that don't make sense in what you are doing.
1) Yes, you install the correct drivers;
2) Yes, you unlock your bootloader; however, if you want to save any data, it would be better if you root first (before unlocking your bootloader) -- see link in my sig, backup apps/etc. and even do a full backup. Don't forget to copy all of that OFF your device, as unlocking wipes even /sdcard.
3) If you are going to install a custom ROM, then there is no need to root the stock ROM you currently have, only to overwrite it with a custom ROM. Doesn't make sense.
4) If you are installing a custom ROM, you cannot "update" it to 4.0.4, unless the dev releases a 4.0.4 update for that particular ROM.
5) If you are sticking with the stock ROM, look at the link in my sig for either how to update to 4.0.4, or, better yet since you are unlocking your bootloader (which will wipe all your data anyway), flash the full 4.0.4 ROM.
6) OTA updates are only for stock ROMs.
7) You can use Titanium Backup once you are rooted to back up apps and app data.
Click to expand...
Click to collapse
What's the difference between a stock rom and a custom rom? I was looking at milestone 4. What is an example of a stock rom because I would prefer that to be able to still do ota updates.
Sent from my Galaxy Nexus

corban227 said:
What's the difference between a stock rom and a custom rom? I was looking at milestone 4. What is an example of a stock rom because I would prefer that to be able to still do ota updates.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
If you are asking that question, more reading is likely in order before you start flashing things.
But anyway: a stock ROM is the ROM Google puts out. They are found here, and instructions on how to flash are in my signature. All other ROMs are custom ROMs.

Gotcha. Ill look it up tonight
Sent from my Galaxy Nexus

I ended up reading more which lead to me unlocking and installing 4.0.4
Im happy with this now and I dont feel the need to custom mod. I need my phone to be functional all the time with out being too time consuming =D thanks for the help and leading me to my conclusion

I would seriously give aokp a try, I promise its worth it. Its the same as stock there's no extra work needed or anything to worry about or deal with. Its that good.

Id say stick with stock. I tried all the custom roms and while customisation options are good, nothing better than knowing your phone is 100 percent stable and secure with a locked bootloader.

biffsmash said:
Id say stick with stock. I tried all the custom roms and while customisation options are good, nothing better than knowing your phone is 100 percent stable and secure with a locked bootloader.
Click to expand...
Click to collapse
I wouldn't recommend re-locking your bootloader if you have unlocked it. Actually, I would recommend that, every time you buy a Nexus device, the first thing you should do is unlock the bootloader. Don't forget, having an unlocked bootloader does not mean you are not "stock". An unlocked bootloader doesn't affect anything (aside from what I mentioned below).
Why you ask? Good question:
Advantages of a locked bootloader
If you lose your device, no one can easily access your data, but only if, in addition to your bootloader being locked, you have the stock recovery installed AND you have USB Debugging disabled AND you have a password on your device. However, this "risk" (if you can call it that) can be mitigated by many apps that can remotely wipe your device.
Disadvantages of a locked bootloader
You cannot use fastboot commands, so you cannot flash or boot images, which can save your butt in certain occasions.
You cannot try out new radios (assuming no root).
You cannot backup your data (i.e., make an image of your device's memory (assuming no root).
You cannot root (on 4.0.4 and later).
You cannot manually update to the latest version of Android once Google starts rolling it out. You have to wait until Google decides it's your turn, which could be minutes to months after the update becomes available.

+1 to working without me thinking. I'm leaving the boot loader unlocked to install any updates Verizon doesn't push through but other than that its staying stock. Plus I really like vanilla ICS AS IT IS
Sent from my Transformer Prime TF201 using Tapatalk 2

Related

[Q]How to flash 1.29.401.11 after having installed CWM? [Solved]

EDIT: What the frick! -.- I fond the answer only seconds after posting this in a thread labeled something entirely different. Oh well. For anyone else looking for the answer to this, my below assumption is correct, aside from having to lock the bootloader again.
More detailed description in this thread.
Original post below:
--------------------
Right, so I rooted and installed CWM on my phone to get rid of that incessantly annoying menu-bar. However, only days after, HTC decided that they'd release an OTA to fix a number of things (internal storage space, for one).
Now, if I've understood this right, there is absolutely no way for me to install the OTA, since I've completely replaced the stock recovery. So what I've gathered from different threads, guides and god knows, is this:
- I need to fastboot write the old recovery back
- Lock my bootloader
- Let the phone update
- Unlock
- Install CWM again
Am I correct? For I am assuming that it's not simply as easy as to flash the new RUU ROM with CWM, since CWM can't access radio, for instance.
MoonshineFox said:
EDIT: What the frick! -.- I fond the answer only seconds after posting this in a thread labeled something entirely different. Oh well. For anyone else looking for the answer to this, my below assumption is correct, aside from having to lock the bootloader again.
More detailed description in this thread.
Original post below:
--------------------
Right, so I rooted and installed CWM on my phone to get rid of that incessantly annoying menu-bar. However, only days after, HTC decided that they'd release an OTA to fix a number of things (internal storage space, for one).
Now, if I've understood this right, there is absolutely no way for me to install the OTA, since I've completely replaced the stock recovery. So what I've gathered from different threads, guides and god knows, is this:
- I need to fastboot write the old recovery back
- Lock my bootloader
- Let the phone update
- Unlock
- Install CWM again
Am I correct? For I am assuming that it's not simply as easy as to flash the new RUU ROM with CWM, since CWM can't access radio, for instance.
Click to expand...
Click to collapse
Where to find the old stock recovery back?
phonixloo said:
Where to find the old stock recovery back?
Click to expand...
Click to collapse
You'll find it in the thread I linked.
Or if you want,
1. Do a CWM backup
2. Relock
3. Perform RUU install
4. Unlock
5. Install CWM
6. Restore CWM backup
7 (optional). wipe cache and Dalvik cache
I use this method as your OTA method means losing root and CWM as Unlocking it after the OTA will erase your data partitions.
jonshipman said:
Or if you want,
1. Do a CWM backup
2. Relock
3. Perform RUU install
4. Unlock
5. Install CWM
6. Restore CWM backup
7 (optional). wipe cache and Dalvik cache
I use this method as your OTA method means losing root and CWM as Unlocking it after the OTA will erase your data partitions.
Click to expand...
Click to collapse
Yeah, I didn't actually need to lock the bootloader. It wasn't necessary. Flash old recovery, install OTA, reflash CWM, make sure root works, if not, reflash SU.
I ended up having to factory reset on the unlock again. Bad move

Just picked up the One X, about to install ARHD

Hi guys,
I just picked up the One X international version and am loving every moment. So far, I've unlocked the bootloader from htcdev.com, installed the Clockwork mod recovery, made a backup, and installed SuperSU (in that order).
While waiting for the next version of ARHD to be released, I've got a few questions hopefully someone can help to answer
1) The directions say to manually flash the corresponding boot.img manually before flashing the ROM. Does this mean I do the reboot into fastboot and use the command prompt to type "fastboot boot boot.img"?​
2) In the future when there are new versions of ARHD released, or I want to try a different ROM, do I just flash the new ROM over the existing one and that's it? Will all my settings and contacts still be intact on the phone or will it be erased? If it will be erased is there any way to back up just those info so I can restore on the updated ROM?​
3) If/when I decide to sell the phone, is there a step by step guide somewhere I can follow to restore the phone back to factory conditions? I assume the backup I made of the phone after I installed Clockwork mod recovery will still be unlocked and have Clockwork installed?​
Thanks in advance for any help/suggestions Can't wait to get started with the ROMs!
1) The directions say to manually flash the corresponding boot.img manually before flashing the ROM. Does this mean I do the reboot into fastboot and use the command prompt to type "fastboot boot boot.img"?​
Yup that sounds about right to me.
2) In the future when there are new versions of ARHD released, or I want to try a different ROM, do I just flash the new ROM over the existing one and that's it? Will all my settings and contacts still be intact on the phone or will it be erased? If it will be erased is there any way to back up just those info so I can restore on the updated ROM?​
If coming from ARHD I think you can just flash the new ROM directly onto the phone and you wont or shouldn't loose any data.
In the 'How to Flash' section of the ARHD Thread it reads:
Download "Super Wipe" script & place it on your SD card (optionally if coming from earlier version of my ROM, obligatory if coming from stock or other custom ROM)​ So basically, the Superwipe script wipes the whole phone, you do this when first flashing a ROM onto your phone, when flashing a newer version onto the phone it isn't necessary to perform a Superwipe.
3) If/when I decide to sell the phone, is there a step by step guide somewhere I can follow to restore the phone back to factory conditions? I assume the backup I made of the phone after I installed Clockwork mod recovery will still be unlocked and have Clockwork installed?​
There are guides somewhere, I'll look for them and PM you a link if I can find it, however a lot of people sell their phones rooted and with custom roms on nowadays. Only re-locking them if they're trying to gain back some warranty.
---Edit---
This is a good thread to read through: http://forum.xda-developers.com/showthread.php?t=1799881&highlight=unrooting
A guide to unrooting: http://onexroot.com/category/one-x-unroot/
And here are the shipped RUUs for the Endeavour: http://forum.xda-developers.com/showpost.php?p=23542734&postcount=1
The-Last-Hylian said:
1) The directions say to manually flash the corresponding boot.img manually before flashing the ROM. Does this mean I do the reboot into fastboot and use the command prompt to type "fastboot boot boot.img"?​
Yup that sounds about right to me.
2) In the future when there are new versions of ARHD released, or I want to try a different ROM, do I just flash the new ROM over the existing one and that's it? Will all my settings and contacts still be intact on the phone or will it be erased? If it will be erased is there any way to back up just those info so I can restore on the updated ROM?​
If coming from ARHD I think you can just flash the new ROM directly onto the phone and you wont or shouldn't loose any data.
In the 'How to Flash' section of the ARHD Thread it reads:
Download "Super Wipe" script & place it on your SD card (optionally if coming from earlier version of my ROM, obligatory if coming from stock or other custom ROM)​ So basically, the Superwipe script wipes the whole phone, you do this when first flashing a ROM onto your phone, when flashing a newer version onto the phone it isn't necessary to perform a Superwipe.
3) If/when I decide to sell the phone, is there a step by step guide somewhere I can follow to restore the phone back to factory conditions? I assume the backup I made of the phone after I installed Clockwork mod recovery will still be unlocked and have Clockwork installed?​
There are guides somewhere, I'll look for them and PM you a link if I can find it, however a lot of people sell their phones rooted and with custom roms on nowadays. Only re-locking them if they're trying to gain back some warranty.
---Edit---
This is a good thread to read through: http://forum.xda-developers.com/showthread.php?t=1799881&highlight=unrooting
A guide to unrooting: http://onexroot.com/category/one-x-unroot/
And here are the shipped RUUs for the Endeavour: http://forum.xda-developers.com/showpost.php?p=23542734&postcount=1
Click to expand...
Click to collapse
Awesome, thanks for the reply and links! I have one last question hopefully someone can confirm... I assume once I flash to any custom ROM whenever there is a software update on the phone I should NOT update? Is it safe to update the apps through the Google Play store such as Facebook GMail etc?
Well with venom Rom for hox u can update it is actually the only rom that has over the air updates directly by the people that made the rom also most customizable Rom too.
Sent from my HTC One X using xda app-developers app
HungryPillow said:
Awesome, thanks for the reply and links! I have one last question hopefully someone can confirm... I assume once I flash to any custom ROM whenever there is a software update on the phone I should NOT update? Is it safe to update the apps through the Google Play store such as Facebook GMail etc?
Click to expand...
Click to collapse
It's safe to update any Apps and things through the Play Store yeah, On a lot of ROMs the OTA Updater is disabled, you'll have to flash the latest RUU onto the phone to get the Update.
E.G We had an ARHD ROM that was running off the 1.29.401.11 update, now we've got a version of ARHD that's running off 2.05.401.2 instead as Mike had updated the ROM to include the latest updates, so everytime there is a new update, the ROMs get updated by the Devs and we can reflash on said ROM.
HungryPillow said:
Awesome, thanks for the reply and links! I have one last question hopefully someone can confirm... I assume once I flash to any custom ROM whenever there is a software update on the phone I should NOT update? Is it safe to update the apps through the Google Play store such as Facebook GMail etc?
Click to expand...
Click to collapse
You may safly update anything from Market (Play). You may backup your phonebook in Google account and through settings in phone book (Export to SD or somthing like this). SMS you may backup also to SD card or to email (there is an option in it). Or try ROMcleaner 2.1 it will backup some settings also and user apps.
And when Mike (ARHD developer) release new ROM, if it is based on NEW official update (RUU) with new sw version it is highly recomended to do a full wipe(Super Wipe script is in his thread). It will erase every app and configuration, except you SD card files.
The correct command is fastboot flash boot boot.img, not fastboot boot boot.img
Sent from my HOX running CMX by Tbalden.

Rooted 4.1.2 what's the best way to update to 4.2

What's the best way to update since I can't update with the version that sprint pushed out since I'm rooted. Is it like a hacked version of the update that I can just update with? Yeah I'm a noob at this.
Thanks!
Not sure if your talking about 4.2 which is to my knowledge only with cm 10 or liquidsmooth or aokp most likely or 4.1.2 md4 either case download the appropriate file of your choice and flash from recovery do make sure backup amyways hope that answers your question
Sent from my SPH-L710 using XDA Premium HD app
six3onei said:
What's the best way to update since I can't update with the version that sprint pushed out since I'm rooted. Is it like a hacked version of the update that I can just update with? Yeah I'm a noob at this.
Thanks!
Click to expand...
Click to collapse
I think you mean update to 4.1.2. Check your version in settings about device. If it's 4.1.1 go here :
http://forum.xda-developers.com/showthread.php?p=586
Sent from my SPH-L710
Cm10.1
Sent from my SPH-L710 using xda app-developers app
Deviant Xone (linked in my sig). Awesome 4.2.2 ROM.
If you're going to any AOSP rom, be sure to update your recovery to the latest!
Also - Create a 0 folder in the root of your internal storage and move all of your files into /sdcard/0 (and I mean everything, files, folders, etc.) When you boot into latest recovery, it'll treat the sdcard/0 as your sdcard root folder. Once you flash an AOSP based rom, it will always use sdcard/0 as the root so if you create the 0 folder prior to flashing, you'll have all of your internal memory accessible.
Overstew said:
If you're going to any AOSP rom, be sure to update your recovery to the latest!
Also - Create a 0 folder in the root of your internal storage and move all of your files into /sdcard/0 (and I mean everything, files, folders, etc.) When you boot into latest recovery, it'll treat the sdcard/0 as your sdcard root folder. Once you flash an AOSP based rom, it will always use sdcard/0 as the root so if you create the 0 folder prior to flashing, you'll have all of your internal memory accessible.
Click to expand...
Click to collapse
Apparently you can avoid this by updating your recovery....the emulated 0 folder, I mean
Sent from my SPH-L710
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
I'm running stock rom that I rooted... The phone version as of now is 4.1.2... as of 1 week I recieved an over the air update from sprint. I was thinking its 4.2 something maybe? maybe I wrong. I was wondering how could I get that update to install? Would i have to un-root then re-root?
Thanks!
six3onei said:
I'm running stock rom that I rooted... The phone version as of now is 4.1.2... as of 1 week I recieved an over the air update from sprint. I was thinking its 4.2 something maybe? maybe I wrong. I was wondering how could I get that update to install? Would i have to un-root then re-root?
Thanks!
Click to expand...
Click to collapse
Hey six3onei,
I'm assuming you just got the notification for the OTA (Over-The-Air) update. The newest version of the Stock Rom is MD4 which is still 4.1.2. Android version 4.2.x probably won't come out for your phone for a couple of months (that's my guess with no data to back it up other than my own intuition).
As far as upadating, you actually don't have to apply the OTA to get the latest and greatest for our phone. All you have to do is flash Freeza's Stock Rooted Rom (You'll want the DeOdex MD4 Rom). It'll give you the most up-to-date Stock Rom with Root. I've linked and quoted a previous post I made which will give you directions to flash it. Also, CNexus has done a great guide about OTAs over in the general sub-forum. I suggest giving that a look-through.
Also, just a note on the flashing sequence below: In step 4 below, if you're coming from a stock Rom and you're going to a stock Rom, all you have to do is wipe Cache and Dalvik Cache. If you're going to a different Rom, it's best to do a full wipe (in my opinion).
Ok, let's start at the very beginning (it's a very good place to start).
Before we get started, I'm going to make the following assumptions:
You successfully rooted your phone through Odin.
You currently have a custom recovery (either TWRP or CWM).
You have a Rom you'd like to flash on either your internal storage or your SDcard (I'd recommend the SDcard, but that's your prerogative).
If either of the first two is not true, I'd recommend going back to qbking77's thread and check out the videos on how to use Odin to gain root and a custom recovery.
If number 3 above is not true, download a ROM (nor someone new to flashing/custom Roms, I'd recommend Freeza's stock rooted Rom, as it's identical to stock TW, but just with Root). Once you download a Rom, check it's md5sum to verify that it's a good download. Copy the file to your SD card and get ready to flash (make sure you have decent battery life left, I try to keep at least 50% or more when flashing Roms, although it shouldn't take too long.
I'll give directions on how to flash a Rom below. The instructions will be for TWRP, but CWM has similar options/settings
Turn your phone completely off (hold down power for 3-5 seconds)
Boot your phone into recovery. Hold Up, Menu, and Power for a few seconds (until SAMSUNG appears on your screen and the phone vibrates)
Make a Nandroid backup. I can't emphasize this enough. In flashing, it's almost a certainty that one time, something will mess up. When that happens, you want to be able to restore a backup. In TWRP, just go into Backup Menu and choose where you want it (internal vs. External storage). It takes my phone a few (5-10) minutes to completely backup my data.
In TWRP, click the wipe button, then system. This will completely wipe the Rom from your phone. Doing this will allow you to get a "clean" install, without any settings or leftover files from your old Rom getting in the way. Instead, you could only wipe data (factory reset), which is good enough for most Roms. I'd still recommend a system wipe, though.
Also while in the Wipe menu, wipe Cache and Dalvik Cache.
Go back to the TWRP main menu.
Click Install, then find your Rom zip file (may have to switch from internal to external storage).
Let TWRP do it's thing.
If you're installing a TW-based Rom, chances are it had gapps already installed. If not, you should now flash the correct gapps package from goo.im. Make sure you're flashing the correct one, as if you don't, your google apps will force close upon use.
Reboot into system and give it time to boot (first boot sometimes takes a couple of minutes).
Set up your phone the way you like.
These should be the directions to follow whenever you flash a new Rom. Some Roms have the Aroma installer, so you'll have more options once you choose to flash the Rom zip, but those are typically easy to follow (and vary from Rom to Rom, so I won't be able to give you a good guide on that).
Hope this helps!
Click to expand...
Click to collapse
The rom you want to download off of Freeza's page is:
DeOdex:
Sprint Touchwiz Jelly Bean 4.1.2 L710VPBMD4 | Mirror
MD5: 77262D9D6CF1A6AF30A8981A95A75D57
Click to expand...
Click to collapse

Am I the only one with these bugs?

Hi,
I'm new here so please go easy on this "noob"
It was my first to unlock and root my phone, followed by flashing a stock ROM (Which is exactly why I rooted it)
I flashed this JB 4.2.2 stock build [ROM] [OTA][GSM] Android 4.2.2 JDQ39: Rooted | Galaxy Nexus > XDA for my Galaxy Nexus
Now...
I can't disable Next-word suggestions in the Language & Input -> Google Keyboard Settings
Also, I noticed a few seconds of lag when pressing the power button to unlock the phone, when viewing recent apps (via the soft-key), and when opening the Camera too
Also, when I choose the "Recent Apps" soft key.. it's as the app that's currently being used is minimised and the homescreen is shown without any icons
The Build came with Busybox pre-installed and now its gone after a day of using my phone... I literally can't find it.
I searched in the play store "BusyBox" and the result is 3 different apps with the same name!
Any Advice?
AMKhatri said:
Hi,
I'm new here so please go easy on this "noob"
It was my first to unlock and root my phone, followed by flashing a stock ROM (Which is exactly why I rooted it)
I flashed this JB 4.2.2 stock build [ROM] [OTA][GSM] Android 4.2.2 JDQ39: Rooted | Galaxy Nexus > XDA for my Galaxy Nexus
Now...
I can't disable Next-word suggestions in the Language & Input -> Google Keyboard Settings
Also, I noticed a few seconds of lag when pressing the power button to unlock the phone, when viewing recent apps (via the soft-key), and when opening the Camera too
Also, when I choose the "Recent Apps" soft key.. it's as the app that's currently being used is minimised and the homescreen is shown without any icons
The Build came with Busybox pre-installed and now its gone after a day of using my phone... I literally can't find it.
I searched in the play store "BusyBox" and the result is 3 different apps with the same name!
Any Advice?
Click to expand...
Click to collapse
go back to recovery, format/wipe /system partition, reflash rom.
For your reference, a good app to install bb is stephen (stericsson)'s busybox installer (play store link). Obviously, it needs root.
Next time, read the stickies.
http://forum.xda-developers.com/showthread.php?t=1812959
How do I get “root”?
If you are booted into a custom recovery (recoveries will be covered later), root is enabled by default. If you want root while booted into Android, you will need to place two files on your system partition: an “su” binary which grants root access, and a superuser app that manages that access. The two that are available are ChainsDD’s Superuser and Chainfire’s SuperSU. Usually these files are packaged up in a zip file that is flashable using a custom recovery, but they can be flashed manually using ADB. Both of these methods will be described below.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=26328017&postcount=123
As you probably noticed by now, you didn't need to flash a full "custom stock ROM" to root.
beekay201 said:
go back to recovery, format/wipe /system partition, reflash rom.
For your reference, a good app to install bb is stephen (stericsson)'s busybox installer (play store link). Obviously, it needs root.
Next time, read the stickies.
http://forum.xda-developers.com/showthread.php?t=1812959
http://forum.xda-developers.com/showpost.php?p=26328017&postcount=123
As you probably noticed by now, you didn't need to flash a full "custom stock ROM" to root.
Click to expand...
Click to collapse
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PS: Do you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
AMKhatri said:
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PSo you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
Click to expand...
Click to collapse
You can wipe the system partition in a custom recovery (dont know if you can with stock). And yes you could flash via ROM manager but I wouldnt recommend it. I am on XenonHD 11.1 and loving it. But roms are a personal choice so there is no 'best' ROM. Just try out.
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
You can wipe the system partition in a custom recovery (dont know if you can with stock). And yes you could flash via ROM manager but I wouldnt recommend it. I am on XenonHD 11.1 and loving it. But roms are a personal choice so there is no 'best' ROM. Just try out.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
The tutorial I followed didn't mention using the ROM manager, but I had not choice.. becuase whenever I went into fastboot mode manually, it got stuck on the screen displaying Google (I waited for minutes without any luck)
How would you recommend CyanogenMod 10.1.2 against the stock 4.2.2 which I have currently?
I read these threads as well whereby they said that there is no "real" solution to the issues:
http://forum.xda-developers.com/showthread.php?t=2178962
http://forum.xda-developers.com/showthread.php?t=2363872
AMKhatri said:
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PS: Do you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
Click to expand...
Click to collapse
Mr., please, read the LINK i gave you! THIS ONE ->>>> http://forum.xda-developers.com/showthread.php?t=1812959
If you read it, you'll stop thinking you need to be doing anything at this point in FASTBOOT interface! Like mrgnex says, you need to be on a custom recovery to format /system. (Have you read the link yet? By now you should know that the /system partition and the /sdcard/ (aka userdata) are 2 different things!)
mrgnex said:
You can wipe the system partition in a custom recovery (dont know if you can with stock). (...) roms are a personal choice so there is no 'best' ROM. Just try out.
Click to expand...
Click to collapse
+1
For your reference, you can't erase /system in stock recovery.
AMKhatri said:
The tutorial I followed didn't mention using the ROM manager, but I had not choice.. becuase whenever I went into fastboot mode manually, it got stuck on the screen displaying Google (I waited for minutes without any luck)
How would you recommend CyanogenMod 10.1.2 against the stock 4.2.2 which I have currently?
I read these threads as well whereby they said that there is no "real" solution to the issues:
http://forum.xda-developers.com/showthread.php?t=2178962
http://forum.xda-developers.com/showthread.php?t=2363872
Click to expand...
Click to collapse
Stop! THERE'S NO NEED FOR FASTBOOT HERE!
Thanks Guys for replying.
Yes, I read the info in the link, it was very helpful.
I'm still confused though.. "Fast boot" and "Recovery" are they the same thing?
I tried a "fix" mentioned by someone about using a live wallpaper such as "Water", I tried it and it's been 1/2 hour and it's really smooth compared to before...
Yes, I do have a custom recovery, actually I don't know why, but It seems I've got two according to ROM Manager.
It says I've got Clockwork Mod Recovery & TWRP.
I also tried going into recovery (Volume up + Down + Power) and it worked this time, when I select recovery, it goes into CWRM
I also did a bit of research about CyanogenMod 10.1.2 and from what I could gather it's liked by people a lot.
I'm guessing that definitely some time ahead it'll get all "laggy" again, Is there any reason according to you why I shouldn't install it compared to the stock 4.2.2 I have?
AMKhatri said:
Thanks Guys for replying.
Yes, I read the info in the link, it was very helpful.
I'm still confused though.. "Fast boot" and "Recovery" are they the same thing?
I tried a "fix" mentioned by someone about using a live wallpaper such as "Water", I tried it and it's been 1/2 hour and it's really smooth compared to before...
Yes, I do have a custom recovery, actually I don't know why, but It seems I've got two according to ROM Manager.
It says I've got Clockwork Mod Recovery & TWRP.
I also tried going into recovery (Volume up + Down + Power) and it worked this time, when I select recovery, it goes into CWRM
I also did a bit of research about CyanogenMod 10.1.2 and from what I could gather it's liked by people a lot.
I'm guessing that definitely some time ahead it'll get all "laggy" again, Is there any reason according to you why I shouldn't install it compared to the stock 4.2.2 I have?
Click to expand...
Click to collapse
So to get things clear:
No fastboot and recovery arent the same thing.
Vol up+down+power brings you into fast boot and not recovery.
Apparently you dont have 2 custom recoverys since you booted into cwm.
Cm10 is great. But there are many great roms out there. You can start off with cm and then (if you please) look further.
I dont see any reason to not install cm10.1.2 since a whole team built and optimized it. So basically it is a better stock.
When you think your phone is slow you should look into the custom kernels. Thats a different story which I will not begin before you want to
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
So to get things clear:
No fastboot and recovery arent the same thing.
Vol up+down+power brings you into fast boot and not recovery.
Apparently you dont have 2 custom recoverys since you booted into cwm.
Cm10 is great. But there are many great roms out there. You can start off with cm and then (if you please) look further.
I dont see any reason to not install cm10.1.2 since a whole team built and optimized it. So basically it is a better stock.
When you think your phone is slow you should look into the custom kernels. Thats a different story which I will not begin before you want to
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Thanks! Now it's definitely clear!
I'll download CM10.1.2 tomorrow and will decide to install it once Stock JB 4.2.2 starts acting up again.
In the meantime I'll read on about kernels, please keep don't close this thread...yet.
clerk usdEuro
I've decided that I will test out the Rom that I have currently (4.2.2) for a few weeks, and then flash CM.
I wanted to know one more thing, Is it bad to flash ROMs to your phone every now and then?
Because I've seen people flashing different ROMs on their phone, I don't wanna damage my phone as I want it to last as long as I can make it.
(by "Bad" I mean... does it reduce the phone's life or it's hardware's life span)
AMKhatri said:
I've decided that I will test out the Rom that I have currently (4.2.2) for a few weeks, and then flash CM.
I wanted to know one more thing, Is it bad to flash ROMs to your phone every now and then?
Because I've seen people flashing different ROMs on their phone, I don't wanna damage my phone as I want it to last as long as I can make it.
(by "Bad" I mean... does it reduce the phone's life or it's hardware's life span)
Click to expand...
Click to collapse
No it can't. I was a flashaholic (until I discovered XenonHD) and my phone didn't got worse. Only overclocking the CPU and gpu can affect the life of the CPU or gpu (or both XD). Just do a fresh install everytime and read the post of the ROM of your choice to see what to do to get it working optimally. If you have any problems just ask.
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
No it can't. I was a flashaholic (until I discovered XenonHD) and my phone didn't got worse. Only overclocking the CPU and gpu can affect the life of the CPU or gpu (or both XD). Just do a fresh install everytime and read the post of the ROM of your choice to see what to do to get it working optimally. If you have any problems just ask.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Thanks...
I'll flash CM in a week or two, as I'm on a tight schedule currently, and I also wanna note down the average battery time I get out of 4.2.2
So... since 4.3 is now out, I was thinking it'd be better for me to flash it other than anything else.
I'll most probably download the stock rom from:
https://developers.google.com/android/nexus/images#yakjujwr66v
So far I came across this thread having the steps to flash 4.3
http://forum.xda-developers.com/showthread.php?t=2377307
But I wanna flash it and lose my data, so that it's as fresh as it can be...
Will that work if I use "wugfresh root toolkit"?
AMKhatri said:
So... since 4.3 is now out, I was thinking it'd be better for me to flash it other than anything else.
I'll most probably download the stock rom from:
https://developers.google.com/android/nexus/images#yakjujwr66v
So far I came across this thread having the steps to flash 4.3
http://forum.xda-developers.com/showthread.php?t=2377307
But I wanna flash it and lose my data, so that it's as fresh as it can be...
Will that work if I use "wugfresh root toolkit"?
Click to expand...
Click to collapse
With the stock package there is no need for a toolkit.
Hell, there's no reason for a toolkit any time.
Sent from my Galaxy Nexus
Pirateghost said:
With the stock package there is no need for a toolkit.
Hell, there's no reason for a toolkit any time.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
What was I thinking...
I apologize guys... I guess I wasn't thinking straight as its past midnight here...
So just to clarify stuff so that I don't end up doing something wrong:
-> Head into Recovery Mode (with usb debugging enabled... connect usb cable to phone and pc)
-> Wipe System
-> Wipe Cache
-> Install from SD card (select .zip file)
right?
Also, I performed a backup of the applications I have via Titanium Backup, They'll work on 4.3 when I restore them right? or do you recommend downloading them from the play store again?
Sorry for being such a noob, and Thanks for your responses!
backup everything from your /sdcard to your computer, titanium backups and a nandroid
the google stock package is NOT flashable in CWM/TWRP
if you follow the GOOGLE instructions it WILL wipe your device (remember that backup you made of everything?)
alternatively you can make sure and have adb/fastboot working on your computer properly, extract all the files out of the zip (including the tar.gz located inside), and in recovery, do a factory reset, then boot to fastboot, fastboot flash system and boot ....
as for Titanium Backup, there is a work around to get it working on 4.3, but root is lacking full power.
Pirateghost said:
backup everything from your /sdcard to your computer, titanium backups and a nandroid
the google stock package is NOT flashable in CWM/TWRP
if you follow the GOOGLE instructions it WILL wipe your device (remember that backup you made of everything?)
alternatively you can make sure and have adb/fastboot working on your computer properly, extract all the files out of the zip (including the tar.gz located inside), and in recovery, do a factory reset, then boot to fastboot, fastboot flash system and boot ....
as for Titanium Backup, there is a work around to get it working on 4.3, but root is lacking full power.
Click to expand...
Click to collapse
Thanks!
I'm now on Android 4.3
I'm full of excitement atm :victory:
I took a backup of my apps using titanium backup, I installed it but can't use it, it says I need root (which I already had before).
I read online somewhere that I need to root again, but I don't wanna lose all my data/ apps I installed again...
Any ideas?
If I use Wugfresh Nexus Root Toolkit... will I lose my data?
Thanks for the continued support!
AMKhatri said:
Thanks!
I'm now on Android 4.3
I'm full of excitement atm :victory:
I took a backup of my apps using titanium backup, I installed it but can't use it, it says I need root (which I already had before).
I read online somewhere that I need to root again, but I don't wanna lose all my data/ apps I installed again...
Any ideas?
If I use Wugfresh Nexus Root Toolkit... will I lose my data?
Thanks for the continued support!
Click to expand...
Click to collapse
Seriously, how hard can it be for you people to waste 5, 5!!! minutes to browse the forums.
http://forum.xda-developers.com/showthread.php?t=2377318
Thanks!
According to a friend's recommendation I used Wugfresh Nexus Root Toolkit to Root, and surprisingly didn't lose any of my data!
Once again, Thanks for all the help everyone... You've all been quite helpful.

Installing TWRP

Sorry to beat a dead horse, I come from the nexus forums and haven't used a samsung device in a while. My friend has the Note 4 with MM on it. Is flashing TWRP as simple as just flashing it via odin with his phone as is? Does he need to complete any process first, before being able to flash TWRP via odin?
Thanks all!
Sprint Note 4 already updated to PD1? If latest update is desired, update it first.
FYI: An ounce of prevention is worth a pound of cure!
The bootloader is already unlocked but the reactivation lock may have been locked by user. Goto to Settings/Security/Reactivation lock and disable it. You can also verify this while in download mode, the phone's display show reactivation lock disabled before your proceed.
Enable developer options by tapping build number in About device in Settings 7 times. Go into developer tab and enable USB debugging.
Using latest Odin and latest TWRP is recommended. You should only flash only the specified custom recovery for your device or the touch screen will not be accurate.
TWRP can be found in the original development thread.
https://dl.twrp.me/trltespr/twrp-3.0.2-0-trltespr.img.tar
Use AP slot and make sure the Samsung driver is installed; get that from Samsung support for Note 4. Make sure KIES and SmartSwitch is closed or uninstalled (may not work on rooted phone; manually backup files you wish to keep just in case). Run Odin as administrator; not required for Windows 10.
To flash, press the Odin exe, uncheck the auto reboot option, load the file using the AP slot, power down phone, hold the keys [volume down, menu and power] together until booted in download initial screen, connect the USB, volume up, verify your COM is connected and start. When you see the success, 0 failed, disconnect USB and pull battery, wait at least 30 seconds and replace battery and boot directly into recovery to ensure it sticks. Otherwise, you're back on stock recovery.
If swapping device owner, it's recommended to remove the Google account before factory resetting the device. Consider it as a good practice for all Settings menu selected factory resets. If you trip the factory reset protection circuit, you need to sign in with original Google account & password.
You can use Odin to downgrade to Android Lollipop 5.1 (most recent OK1 build recommended if going back to Lollipop) but you cannot use Odin to downgrade to Android 5.0 Lollipop or KitKat. The bootloader prevents lower security bootloaders from being installed.
Custom ROMs may remove ItsOn but may not remove it from root folder. Unless /carrier/ItsOn folder is deleted, you may suffer continual reboots if factory resetting device at some point. After following and verifying all the above, you may consider factory resetting, including wiping data, internal memory and Android folder in extSdCard to make a clean break with normal un-rooted conditions and Lollipop fragments on phone to prevent random reboots.
Sent from my SM-N910P using Tapatalk
samep said:
Sprint Note 4 already updated to PD1? If latest update is desired, update it first.
FYI: An ounce of prevention is worth a pound of cure!
The bootloader is already unlocked but the reactivation lock may have been locked by user. Goto to Settings/Security/Reactivation lock and disable it. You can also verify this while in download mode, the phone's display show reactivation lock disabled before your proceed.
Enable developer options by tapping build number in About device in Settings 7 times. Go into developer tab and enable USB debugging.
Using latest Odin and latest TWRP is recommended. You should only flash only the specified custom recovery for your device or the touch screen will not be accurate.
TWRP can be found in the original development thread.
https://dl.twrp.me/trltespr/twrp-3.0.2-0-trltespr.img.tar
Use AP slot and make sure the Samsung driver is installed; get that from Samsung support for Note 4. Make sure KIES and SmartSwitch is closed or uninstalled (may not work on rooted phone; manually backup files you wish to keep just in case). Run Odin as administrator; not required for Windows 10.
To flash, press the Odin exe, uncheck the auto reboot option, load the file using the AP slot, power down phone, hold the keys [volume down, menu and power] together until booted in download initial screen, connect the USB, volume up, verify your COM is connected and start. When you see the success, 0 failed, disconnect USB and pull battery, wait at least 30 seconds and replace battery and boot directly into recovery to ensure it sticks. Otherwise, you're back on stock recovery.
If swapping device owner, it's recommended to remove the Google account before factory resetting the device. Consider it as a good practice for all Settings menu selected factory resets. If you trip the factory reset protection circuit, you need to sign in with original Google account & password.
You can use Odin to downgrade to Android Lollipop 5.1 (most recent OK1 build recommended if going back to Lollipop) but you cannot use Odin to downgrade to Android 5.0 Lollipop or KitKat. The bootloader prevents lower security bootloaders from being installed.
Custom ROMs may remove ItsOn but may not remove it from root folder. Unless /carrier/ItsOn folder is deleted, you may suffer continual reboots if factory resetting device at some point. After following and verifying all the above, you may consider factory resetting, including wiping data, internal memory and Android folder in extSdCard to make a clean break with normal un-rooted conditions and Lollipop fragments on phone to prevent random reboots.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Thanks bud. This was really great!
hate to be a stickler, but im a frickin nub.... after doing this how do i get root access?? pls help im new i just paid 10$ FOR A NOTE 4 , mint condition hahah but for real someone help..
CorporalCactus said:
hate to be a stickler, but im a frickin nub.... after doing this how do i get root access?? pls help im new i just paid 10$ FOR A NOTE 4 , mint condition hahah but for real someone help..
Click to expand...
Click to collapse
To get root after getting on desired update, whether it be current update, downgrading (be careful with downgrading; most likely you're only able to downgrade as low as Android 5.1 but that depends on your current bootloader) or upgrading, you flash TWRP and then you would do one of two things:
1) flash a pre-rooted ROM. Custom ROMs in our forum do this.
2) flash custom kernel and complete root with SuperSU zip. Both are flashed in recovery but both should be flashed before booting. Kernel first, then flash SuperSU zip and boot. You would also need to manually remove ItsOn and Knox.
Given the complexity of it, I'd suggest the custom stock ROM for you. The ROM should match your bootloader. I'd recommend stock, aka touchwiz ROMs. They're mostly stock and have less bugs and workarounds than others like CM.
We still don't have highly customized Marshmallow stockish ROMs but I don't think it will be long before we see them. By the time they're here, maybe you're ready.
Read the OP of the custom ROM. If you don't understand or need clarification, this thread is a good place to ask the question. Install this app to check your bootloader (baseband is relevant too):
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
Hint: make sure you're on the the recommended bootloader and baseband first. If you have trouble with TWRP flash sticking, you may not be unchecking auto reboot and pulling battery after successful flash and booting directly into recovery to make it stick properly. You have to wait at least 30 seconds after battery pull and boot directly into recovery.
Sent from my SM-N910P using Tapatalk
samep said:
To get root after getting on desired update, whether it be current update, downgrading (be careful with downgrading; most likely you're only able to downgrade as low as Android 5.1 but that depends on your current bootloader) or upgrading, you flash TWRP and then you would do one of two things:
1) flash a pre-rooted ROM. Custom ROMs in our forum do this.
2) flash custom kernel and complete root with SuperSU zip. Both are flashed in recovery but both should be flashed before booting. Kernel first, then flash SuperSU zip and boot. You would also need to manually remove ItsOn and Knox.
Given the complexity of it, I'd suggest the custom stock ROM for you. The ROM should match your bootloader. I'd recommend stock, aka touchwiz ROMs. They're mostly stock and have less bugs and workarounds than others like CM.
We still don't have highly customized Marshmallow stockish ROMs but I don't think it will be long before we see them. By the time they're here, maybe you're ready.
Read the OP of the custom ROM. If you don't understand or need clarification, this thread is a good place to ask the question. Install this app to check your bootloader (baseband is relevant too):
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
Hint: make sure you're on the the recommended bootloader and baseband first. If you have trouble with TWRP flash sticking, you may not be unchecking auto reboot and pulling battery after successful flash and booting directly into recovery to make it stick properly. You have to wait at least 30 seconds after battery pull and boot directly into recovery.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
damn thanks for this info! youre the man! you know ur stuff thats awesome. im confused regarding the kernel.. i just winged it tbh, i installed TWRP via odin. got it to stick, then flashed SUPERSU and got root. I made a full backup via twrp then i flashed a custom CM rom and it works awesome. i didnt do anything regarding kernels. My question now is, what is the easiest way to swap between roms?? Such as stock Rom to this New CM rom i have. Would i just create backups and restore when i want to switch??
CorporalCactus said:
damn thanks for this info! youre the man! you know ur stuff thats awesome. im confused regarding the kernel.. i just winged it tbh, i installed TWRP via odin. got it to stick, then flashed SUPERSU and got root. I made a full backup via twrp then i flashed a custom CM rom and it works awesome. i didnt do anything regarding kernels. My question now is, what is the easiest way to swap between roms?? Such as stock Rom to this New CM rom i have. Would i just create backups and restore when i want to switch??
Click to expand...
Click to collapse
You could make backups and factory reset before restoring. If you have issues restoring stock backups, wipe internal memory also.
You have to take care to read and adhere to changing trends with CM; they may not be compatible with Marshmallow baseband and bootloader yet but may even require a different kernel to run with Marshmallow bootloader and baseband. I'm not current on the latest and lack experience. Search the specific ROM threads for CM known issues, workarounds and trends.
As far as the kernel question, I did omit the fact you could flash SuperSU to patch the stock kernel; you didn't do any wrong there. I've abandoned use of stock kernel since Android 5.1 required an exploit to root. We didn't always have the boot image patch that SuperSU now includes. For some reason, users are randomly losing root with systemless root. If that happens, just flash SuperSU again; same version or higher should be OK.
Sent from my SM-N910P using Tapatalk
samep said:
You could make backups and factory reset before restoring. If you have issues restoring stock backups, wipe internal memory also.
You have to take care to read and adhere to changing trends with CM; they may not be compatible with Marshmallow baseband and bootloader yet but may even require a different kernel to run with Marshmallow bootloader and baseband. I'm not current on the latest and lack experience. Search the specific ROM threads for CM known issues, workarounds and trends.
As far as the kernel question, I did omit the fact you could flash SuperSU to patch the stock kernel; you didn't do any wrong there. I've abandoned use of stock kernel since Android 5.1 required an exploit to root. We didn't always have the boot image patch that SuperSU now includes. For some reason, users are randomly losing root with systemless root. If that happens, just flash SuperSU again; same version or higher should be OK.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
ugh i messed something up and cant find the restore files for the note 4. after flashing that CM rom, a lot of stuff didnt work so i restored a backup i just made. it bootlooped, i did it again and the phone came on, BUT i cannot place or delete and media from the device using a PC.. not sure why its say the device has either stopped responding or has been disconnected
CorporalCactus said:
ugh i messed something up and cant find the restore files for the note 4. after flashing that CM rom, a lot of stuff didnt work so i restored a backup i just made. it bootlooped, i did it again and the phone came on, BUT i cannot place or delete and media from the device using a PC.. not sure why its say the device has either stopped responding or has been disconnected
Click to expand...
Click to collapse
Did you factory reset and wipe internal memory when restoring the backup?
Put your micro sdcard in a card reader and transfer it. If you're trying to transfer while in recovery, that currently doesn't work.
If you're trying to copy your TWRP backup to micro sdcard, the path should be: TWRP/BACKUPS/(your device s/n recognized by TWRP)/(TWRP Backup folder)
Without proper path, TWRP may not see the backup as official. When saving TWRP backups, the TWRP folder as a whole with desired backups should be saved.
If you can't restore the backup, you can flash a ROM that matches bootloader. Like I said before, factory reset and wipe internal memory and flash the ROM.
Sent from my SM-N910P using Tapatalk
CorporalCactus said:
ugh i messed something up and cant find the restore files for the note 4. after flashing that CM rom, a lot of stuff didnt work so i restored a backup i just made. it bootlooped, i did it again and the phone came on, BUT i cannot place or delete and media from the device using a PC.. not sure why its say the device has either stopped responding or has been disconnected
Click to expand...
Click to collapse
At this point I would just recommend flashing a new ROM man.
Sent from my SM-N910P using Tapatalk

Categories

Resources