hello, i just got my first android phone so I'm new to this sort of stuff, though I love being able to unlock hidden potential of different devices, so naturally I discovered the ability to root smart phones and all that good stuff.
The model I have is the Samsung Galaxy Gio GT-S5660M. It's running 2.3.4. Gingerbread version.
I've been reading a lot of guides and for the most part rooting and adding additional utilities like flash, etc. seems pretty simple. However, I have not yet been able to find out how to create a back of up of my stock firmware when I bought the phone in case I end up bricking it, or decide I want to return to stock.
I've read many guides that claim to show how to create back ups and recovery points, but I'm still having trouble understanding it.
To be more specific, I would like to create as opposed to download, a back up of the phone in it's current state which is, as I said earlier, stock. I did a factory reset since I had some stuff installed while I was fiddling with it for the first time.
thx
You have to root it before you can back up stock rom so, firstly you root it (you can find guides here on xda)
Then install clockworkmod recovery: warning: DON'T EVER USE ROM MANAGER TO INSTALL CLOCKWORKMOD ON YOUR GIO, IT WILL BRICK YOUR PHONE!! use one of the recoveries found in xda, you will also find guides to install them there.
Then third; backup in clockworkmod using "backup and restore"
Sent from my GT-S5660
iok1 said:
You have to root it before you can back up stock rom so, firstly you root it (you can find guides here on xda)
Then install clockworkmod recovery: warning: DON'T EVER USE ROM MANAGER TO INSTALL CLOCKWORKMOD ON YOUR GIO, IT WILL BRICK YOUR PHONE!! use one of the recoveries found in xda, you will also find guides to install them there.
Then third; backup in clockworkmod using "backup and restore"
Sent from my GT-S5660
Click to expand...
Click to collapse
so first of all, what I'm looking for is called a ROM right?
what I don't get though is how come I need to modify the device before creating the backup. Isn't the phone modified at that point? Or is the stock configuration being stored somewhere on the phone that I can't see without clockwork?
You cannot create a backup without the recovery mod CWM Clockwork Recovery Mod. But to install this you need your device rooted (modified so you can modify and view system files)
gfyrdr said:
so first of all, what I'm looking for is called a ROM right?
what I don't get though is how come I need to modify the device before creating the backup. Isn't the phone modified at that point? Or is the stock configuration being stored somewhere on the phone that I can't see without clockwork?
Click to expand...
Click to collapse
1 - you don't need to search for a rom to backup your stock rom
2 - you need to root your phone in order to be able to backup your rom
3 - you need to install a more advanced recovery (program "similar" to pc BIOS) in order to do a nandroid backup
4 - after you flash that more advanced recovery (aka CWM -> ClockWorkMod), you backup your rom in "backup and restore" menu, backup. It will then store your rom in a folder.
5 - you should strongly consider after that, to install a custom rom made by many of the devs here on XDA in order to have a better experience with your phone...
0M3G4_ said:
1 - you don't need to search for a rom to backup your stock rom
2 - you need to root your phone in order to be able to backup your rom
3 - you need to install a more advanced recovery (program "similar" to pc BIOS) in order to do a nandroid backup
4 - after you flash that more advanced recovery (aka CWM -> ClockWorkMod), you backup your rom in "backup and restore" menu, backup. It will then store your rom in a folder.
5 - you should strongly consider after that, to install a custom rom made by many of the devs here on XDA in order to have a better experience with your phone...
Click to expand...
Click to collapse
+1 That was what I wanted to say
I've already uploaded a stock ROM backup last fall of the same Gingerbread ROM you're running, along with instructions on how to make one yourself or flash mine.
The best advice I can give you is: research, research, and more research.
Good luck,
Darkshado
Sent from my Nexus S using XDA
What software do you recommend to clockworkmod Gio with?
s!mon said:
What software do you recommend to clockworkmod Gio with?
Click to expand...
Click to collapse
I use px-cwm-v2.zip recovery.
You flash it using stock recovery.
thx for the replies. I will give it a try.
Darkshadow, whats the thread's name where you posted the ROM and instructions? I'd like to check that out too.
Also, whats a good rom to consider upgrading to? Something that has the ability to play flash videos.
EDIT:
If I understand correctly, roms are basically whole operating systems that have been customized by the developer. So a rom can be already rooted and have clockwork as well as other custom stuff, and I just need to flash it. The alternative to this is to do everything manualy... root the current OS, add clockwork and whatever else. Correct?
Also, I'm not sure yet if a rooted phone has any extra options on it's own, or if it's only a set up that's sole purpose is to allow other applications to be installed who then will give the user better control over his device.
I've run into a little problem.
I'm following this guide: http://forum.xda-developers.com/showpost.php?p=16963172&postcount=1
I've got Odin and the tar downloaded, but when I go into download mode with my phone and connect it to the PC, it says that the device driver was not successfuly installed, and I get no confirmation in Odin that a connection has been made between the phone and the program.
What am I missing?
Thx.
EDIT:
Nevermind, I needed to install Kies. Don't even need to run it. Apparently it has the driver that's needed.
Okay, I've rooted my phone successfully. Now the next step is to install Clockwork and create a back up.
Now that I understand a little bit the way Odin and flashing ROM works, I think it would be better to just download a stock ROM and in case something goes wrong, I can just flash it the way I flashed the rooted one.
(I think I saw a completely stock ROM somewhere for my model but I don't remember where. A link would be appreciated if it exists.)
Correct me if I'm wrong pls.
Also, if I do that, then is there any reason to install Clockwork since I've read that many ppl have issues with installing it and it's riskier than rooting or installing other software.
Right now I think what I'm most interested in is installing Adobe Flash Player 11 or something of the sort that can play flash videos and streams.
^
http://forum.xda-developers.com/showpost.php?p=19623732&postcount=1
taken from the sticky
i'm also thinking of installing cwm
looking at the sticky, http://forum.xda-developers.com/showpost.php?p=20397988&postcount=8
how outdated is this cwm?
I'm using Opera as my browser so from what I've learned, flash doesn't work with it period. Is skyfire a good alternative?
Also, like I said, I don't think I need the clockwork if I can get a clean stock ROM that I can just flash if something goes wrong. As I don't intend to download many apps or add many phone numbers (memorized instead), a backup isn't really needed.
nvmd, i just went ahead and installed the cwm in that link, there's a 5.0.2.7 though if that is even the newest one
now, i cant seem to backup my phone
it says it cannot mount /system
try dolphin browser
anonxlg said:
nvmd, i just went ahead and installed the cwm in that link, there's a 5.0.2.7 though if that is even the newest one
now, i cant seem to backup my phone
it says it cannot mount /system
try dolphin browser
Click to expand...
Click to collapse
Did you pick the ext4 + rfs version?
Sent from my GT-S5660
Clockwork is not riskier than other things you do. Just follow steps and you see no problems.
anonxlg said:
^
http://forum.xda-developers.com/showpost.php?p=19623732&postcount=1
i'm also thinking of installing cwm
looking at the sticky, http://forum.xda-developers.com/showpost.php?p=20397988&postcount=8
how outdated is this cwm?
Click to expand...
Click to collapse
its an older version, its 5.0.2.7, theres also 5.0.2.8 but these give some problems after installing/wiping, so some people still use the older version.
Hello guys,
I'm new here. I have the same problem as anonxlg. It says can't mount system. I also used the version from the big thread for new users. Can anyone enlighten me on what to do? I've been searching the forum and google, but can't make it work. I feel like a compleet noob now, and I don't feel special about it.
RJ88
Edit: I kept searching, and finally found a working 5.0.2.7 version. First I had another 5.0.2.7 version, but when I tried to install it didn't work. I finally found "signed_cwm-5.0.2.7-flashablezip-ext4+rfs.zip (Flash from Recovery)" on http://forum.xda-developers.com/showthread.php?t=1421650 (through google actually. I have to get used to this site), and I'm making my backup now.
thanks RJA88, backup worked
edit/update
i used the cwm linked and backup worked, i tried installing cm9 beta8 (galaxyics), and it would get stuck after samsung bootscreen (it flashes a white pick or soemthing before full back screen)
i tried restoring backup i made, and it didnt work, some mount error again
i reverted back to 5.0.2.6 and did the restore backup again, and this time it goes up the the galaxy gio gt5660m screen and just stop..
note that i do not know what the rfs/ext4 is for for the gio if that is what is causing problems
Related
Is there a basic guide for rooting the epic?
I've rooted my droid a while ago, and loved the rom manager...
is there rom manager support?
Yea there is man. Go to the development thread and one of the stickies is for the wiki development page. That will have the basics and link you to the needed pages with directions. The rom manager we use on epic is clockwork recovery rom manager. Its simple to use and easy to install. Read up though first.
Sent from my SPH-D700 using XDA App
Just look at my post. Works perfect
Sent from my SPH-D700 using XDA App
If you go to the general forum, which is where you posted this, and click on:
Samsung Epic 4G Wiki - CLICK HERE AND USE THIS BEFORE POSTING
Its in there.
problem backing up my current ROM
everytime I use ROM Manager to backup my current ROM it goes to Recovery and then when I reboot the phone nothing shows up my Manage and Restore backups in ROM Manager.
Any thoughts?
Bj
Use backup and restore within cwm, not rom manager.
But you should be able to do this from ROM manager, right?
and what is cwm, i'm new at all this
Rom manager sucks for the epic. You need to use a custom kernel to use rom manager. It won't flash cwm for you on stock kernel.
Bj do you have cwm installed? Clockwork mod is a custom recovery mod. You use to NAND backup, flash, partition, clear battery stats and mire. You can only install it from a pc.
Maybe I'm slow
Maybe I'm slow here.... walk me through this.
I rooted my phone.
I have ROM Manager, which does include cwm. I purchased the paid app for ROM manager, but nothing seems to work, when i try to back up my phone boots to recovery and nothing is saved. when I search for new roms none show up.
I'm using a mac at home, but i rooted my phone on my work pc.
Please help me be able to install custom roms (froyo). please define terms and provide links if possible.
Bj
You rooted your phone good but rom manager will not flash clockwork for you. It says it dies but it won't. The only way to get cwm is to run the one click root plus clockwork. If yo turn your phone off and hold power, camera, and volume down what does the text look like. If you see blue writing and like 4 options that is the stock recovery. If it's green with a good bit of options that is what you want for flashing roms. But the new version of cwm3 is out and that is orange writing. For flashing all you do is put the rom on the root of the sd card, boot into cwm, wipe cache, data, and dalvik three times each. Then go to install zip from sd card, choose zip, and scroll till you find the rom on the sd card and hit the camera button to flash it.
the_bj said:
Maybe I'm slow here.... walk me through this.
I rooted my phone.
I have ROM Manager, which does include cwm. I purchased the paid app for ROM manager, but nothing seems to work, when i try to back up my phone boots to recovery and nothing is saved. when I search for new roms none show up.
I'm using a mac at home, but i rooted my phone on my work pc.
Please help me be able to install custom roms (froyo). please define terms and provide links if possible.
Bj
Click to expand...
Click to collapse
musclehead84 said:
You rooted your phone good but rom manager will not flash clockwork for you. It says it dies but it won't. The only way to get cwm is to run the one click root plus clockwork. If yo turn your phone off and hold power, camera, and volume down what does the text look like. If you see blue writing and like 4 options that is the stock recovery. If it's green with a good bit of options that is what you want for flashing roms. But the new version of cwm3 is out and that is orange writing. For flashing all you do is put the rom on the root of the sd card, boot into cwm, wipe cache, data, and dalvik three times each. Then go to install zip from sd card, choose zip, and scroll till you find the rom on the sd card and hit the camera button to flash it.
Click to expand...
Click to collapse
Basically, do what he said. But, to run most of the Froyo ROMS, you need a DK-28 modem. Now, I'm not the one to provide the information to what that is, but all I know if that you need it.
Directions taken from BThomas22x (the maker of VIPEROM which is what I use):
As for use of Odin, It's actually a lot easier than it seems. I'll give you a quick runthrough.
1. Download and extract Odin, as well as the Modem and PIT files. (You DO NOT flash the ROM through Odin, The ROM is flashed through Clockwork.)
2. Open Odin. At this point, you have to put your phone in download mode. To do so, simply hold the number 1 on the keyboard, and the power button at the same time. Once in download mode, plug the USB cable into the phone. Only plug the phone in AFTER Odin is up and running or Odin won't pick up the phone.
3. Navigate to where you downloaded the modem and pit files and place the PIT file where it says "PIT" and the modem.bin file where it says "phone".
4. On the left side there is an options box. Make sure that "reboot" is the ONLY thing that's checked.
5. Now you're ready to flash the new modem. (Remember, the modem does NOT need to be downloaded, it's just a bonus feature) Hit start and allow it to run through it's process. When finished, the block above the port that your USB is showing will turn either green or red for pass or fail. At this point I haven't heard of anyone failing.
When Odin is done doing it's thing, it will automatically reboot the phone for you. Then you're setup with the new modem!
Click to expand...
Click to collapse
Head over to http://forum.xda-developers.com/showthread.php?t=864445 if you need more help/the download links don't work.
Now, that's the DK-28 modem. YOU NOW MUST USE ROMS WITH THE DK-28 MODEM! I'm pretty sure most of the 2.2 (Froyo) ROMs use DK-28, but someone might want to double check me. It's good to learn how to use Odin anyway since it's your way out if you brick your phone.
I think I was going to include something else, but I'm too tired to remember... lol. Just send me a PM if you need any more help and I'll get back to you later tomorrow or just keep posting here.
Odin gave me a pass.
Now where do I go to get my ROM, can I still use ROM manager or should I go another route?
THanks!
the_bj said:
Odin gave me a pass.
Now where do I go to get my ROM, can I still use ROM manager or should I go another route?
THanks!
Click to expand...
Click to collapse
And also what is the best way to back up my current ROM now?
Forget ROM manager.
Get your roms from the dev forum.
Put them on your sdcard where you can find them.
Flash them with clockwork.
The best way to back up your current rom is to select "backup" from within clockworkmod. It will not, however, backup your kernel. The easiest way to restore a backup is to reflash the original rom, then advanced restore->restore data in cwm.
The only way to get cwm is to run the one click root plus clockwork.
Click to expand...
Click to collapse
That isn't the only way, but it is definitely the easiest if you aren't comfortable fiddling around with a command line on your phone.
DiGi760 said:
Forget ROM manager.
Get your roms from the dev forum.
Put them on your sdcard where you can find them.
Flash them with clockwork.
The best way to back up your current rom is to select "backup" from within clockworkmod. It will not, however, backup your kernel. The easiest way to restore a backup is to reflash the original rom, then advanced restore->restore data in cwm.
That isn't the only way, but it is definitely the easiest if you aren't comfortable fiddling around with a command line on your phone.
Click to expand...
Click to collapse
If i've already rooted can I still use one click root plus CWM and do you have a link for where I can get it?
Yes the one click will still work. It will check if you have root and skip the exploit when it isn't needed. It will then proceed to install busybox, the reidirector, and clockworkmod.
You can find the one-click version 2.5.5 in the dev forum. It is one of the stickies at the top of that forum.
DiGi760 said:
Forget ROM manager.
The best way to back up your current rom is to select "backup" from within clockworkmod. It will not, however, backup your kernel. The easiest way to restore a backup is to reflash the original rom, then advanced restore->restore data in cwm.
.
Click to expand...
Click to collapse
Wow. So this is why my data restores never work...? lol I always get f/cs after I restore something. Thanks for this!
Hi all,
Im an experienced WM developer and switching to Android as a user,
I Got I9003 and working very fine with me, my device is Arabic enabled,
I have flashed my mobile more than 10 times( using I9003JPKE1_OJPKC2_JXKA4 and Odin) because of trying to get Vanilla Unlock and the nice theme here
http://forum.xda-developers.com/showthread.php?t=1112991&page=8
my Questions are:
1.what is the best backup software that restore everything and settings by itself(astro Sux)
2.how to get the ClockWorkMod for my device instead of the stupid glass lock, I followed the instructions
and my device stuck on the samsung screen and keep restarting(what should I do in this case? i tried everything just flashing works and :S)
3. what to do exactly to get theme Ultimate-Bule-tripin in my version?
4. what else i should know
my device info:
2.2.1
kernel [email protected] #1
build: FROYO.JPKE1
Baseband:I9003JXKA4
thanks all in advance.
1. Titanium Backup
Others i dont know If CF-Root doesnt work, no idea (=
thanks man, will the free version do it for me or must be pro?
The Titanium free version hasn't mega-useful Batch operations. So if you have many apps to backup, it'll be incredible long story to backup them one-by-one on free version. So, get Full version, or try MyBackup Pro app, or use a nandroid backup using ClockWorkMod. Btw, CWM isn't a replacement for lockscreen, it's recovery mode mod allowing to do some useful operations (such as backup, wipe caches e.g. etc.)
Or you can use Google and get the full version, i'm not sure if i can give you any link, so i wont, but if you know how to use google you can find it without a problem
Hint: mobilism
#2 question...download ROM manager and select flash clockwork recovery, then it should give you an option to choose your device. Download CWMod for your phone. You should now have latest clockwork.
Sent from my HERO200 using XDA App
my Questions are:
1.what is the best backup software that restore everything and settings by itself(astro Sux).
Ans: I think Titanium Backup will do the work most. Recommend that only restore APK without data as you may face force close in some apps. Beware that it does not backup APN setting. Please use APN Back&Restore in case APN is total wipe out. U can use CWM backup through recovery mode and restore. Beware sometime CWM can get corrupted and data restore will have some force close after reboot
2.how to get the ClockWorkMod for my device instead of the stupid glass lock, I followed the instructions
and my device stuck on the samsung screen and keep restarting(what should I do in this case? i tried everything just flashing works and :S)
Ans: Glass lock has nothing to do with CWM. It is the laucher bug issue. Sometime is best to install 2 or more laucher in your rom. Just flash another laucher through ODIN will work.
3. what to do exactly to get theme Ultimate-Bule-tripin in my version?
Ans: Feedback the bug you are having to the theme developer. They should know how to fix it. Is thier duty to provide solution.
4. what else i should know
Ans: You may find that not all products suite you and not all product developed is perfect. Keep flashing for the right one, learn from mistake, pick-up the error and google your problem for solution. Standby your spare phone in case your phone is totally knock down and cannot be restart.
cheer
As a very good FREE backup tool I'm using My Backup Root (from the market). You need to have your phone rooted but it works very nice.
Thanks a lot guys, you helped me well, I mentioned the CWM because to install the update.zip which requires CWM to install because of the signature, I flashed the CWM several times with different versions but same results on startup I really like the Ultimate-Bule-tripin with the vanilla lock and i'll sell the phone if i couldnt get it
AbuS3ood said:
Thanks a lot guys, you helped me well, I mentioned the CWM because to install the update.zip which requires CWM to install because of the signature, I flashed the CWM several times with different versions but same results on startup I really like the Ultimate-Bule-tripin with the vanilla lock and i'll sell the phone if i couldnt get it
Click to expand...
Click to collapse
I have read the thread,
1) Did you meet the requirement??
Requirements:
-XXKB3 FW
-Deodexed framework is mandatory
2) Have you try install zip from sd card with CWM recovery? CWM provide install zip from sd card, you can explore where have you save the file and execute it. You does not need to rename the file to update.zip.
the problem is i cant install the CWM to my device, every time i install it via odin the device does not start and then i have to flash it, how can i find a version compatible with my device firmware ver?
my device info are :2.2.1
kernel [email protected] #1
build: FROYO.JPKE1
Baseband:I9003JXKA4
so which FW i am????
and i cant see any KB3( btw pleaaaaase tell me which section must have this code????)
Please provide the link to flash CWM for your I9003. I need to look at it.
Update: CWM only work for I9000, there are developer trying to get CWM working on the I9003 device.
I guess whithin 2-3 week time, CWM should be available for your device.
http://forum.xda-developers.com/showthread.php?t=1109424&page=11
here it is:
http://forum.xda-developers.com/showthread.php?t=1120301
thanks in forward, your help appreciated
can u please tell me which FW i have? and which section is supposed to have KB3(KBX)????
ps:my device must have Arabic lang.
You are having the latest ASIAN Froyo Firmware. Your device should be compatible.
http://forum.xda-developers.com/showthread.php?t=1004647.
CWM does not work for your device for now. To solve your problem, try to download Root Explorer Pro version from market (Need to buy). Then you can copy the downloaded theme file into your system.
By the way, i'm from SGS I9000 device. Not from I9003. There might be some different to replace file directory.
Good Luck.
Thank Button, please.
can u please just give me the brief steps to install the theme using the root explorer?
does it need more than rooted device or must be deodexed??
btw i always thank but now it gives me
Sorry, you are limited to five thanks per day
Thanks man, i got it done, i have deodexed my I9003 from this Thread
and then managed to copy the vanilla lock apks via ADB shell, now i can use my Android
I have a AT&T samsung galaxy S3 rooted by using the samsung galaxy toolkit http://forum.xda-developers.com/showthread.php?t=1746665
I'm interested in flashing the following CM10 Nightly rom http://forum.xda-developers.com/showthread.php?t=1778270 to my phone but have a few questions before I proceed.
1) What precautions should I take before flashing a custom rom? I understand I first need to make a nandoid backup (which I have done) and verify that I have the correct rom for my specific phone model that I will be flashing to. If I were to choose the CM10 Nightly rom, the link from the post goes to http://get.cm/?device=d2att which appears to be correct for my AT&T Samsung Galaxy S3 SGH-1747.
2) Since I flashed with the samsung galaxy toolkit, it flashed the following recovery "CWM-Based Recovery v5.5.0.4 - Do I need to use a different recovery in order to use the CM10 Nightly roms or is this one compatible? If not, how do I go about changing to another recovery?
3) What is the steps for flashing properly? Would I need to update kernel or model or just simply download rom, save to SD card, boot to recovery, then flash the rom in zip form?
I appreciate any your responses in advance. I tend to over analyze and I feel i've read enough about the process of flashing custom roms but I want to be certain. Thank you!
It looks like you got all you ducks in a row, on behalf of the community thanks for being a smart user :good:.
1) You nailed it....make absolutely certain you are downloading the correct software for your device, flashing an incompatible ROM can leave you with a really sexy, expensive paper weight. The d2att identifier is unique to the AT&T variant of the SG3 (i747). Before you flash any new rom or kernel (or anything else for that matter in my opinion) make a nandroid or equivalent backup from your recovery. I do this even for the smallest mod, tweak, theme whatever if for nothing else incase i dont like it it an easy undo 'button'. Besides that i like to keep a fairly recent backup on something other than my phone.
2) For all intensive purposes that version of CWM will work, atleast currently. I would recommend you update it however as that version is several builds behind and there are sometimes updates in the more current ROM builds that may not play nice with older recoveries. The easiest way to do this is download Clockwork Rom Manager from the play store, on the main app screen at the very top is the option to install the latest recovery. It will download, preferably on wifi to minimize downloading errors as much as possible, and then install automatically. There is also atleast one other alternative recovery that i know of, TWRP, which is worth checking out in my opinion. Just keep in mind the backups from the different recoveries are NOT interchangeable.
3) It always best to follow any and all directions in the OP of whatever ROM you are installing as most differ. The generally accepted order for flashing goes something like this although everyone will have an opinion on this i'm sure. ROM > Gapps (if required by the rom) > Reboot > Kernel > Reboot. If you are really concerned you can always just flash one at a time allowing a full reboot in between each flash, personally i think this is overkill but thats just my opinion.
One last personal suggestion, I always keep a copy of my rom, kernel, and any required supporting software on my external sd just in case. It comes in handy if for some reason you try something that doesn't work out the way you had hoped and you are away from a computer and your phone is unable to boot into android. Some would argue that a nandroid makes this unnecessary but with 32 gigs in my current setup its not like im hurting for space. Hope this helps to clarify some things for you, good luck!
dntesinfrno, Thank you very much for your reply and kind words
A lot of the information has been posted on the boards but it can be a little confusing and too much information at once.
You mentioned that I can simply use Rom Manager then click "Flash ClockworkMod Recovery", are there any reports of there being problems in using rom manager to flash the recovery or is the S3 fully supported?
As for the kernel flashing.. I'm really only interested in flashing custom roms (CM10), is it necessary to flash the kernel as well when flashing custom roms? I didn't see anything on the other thread stating anything about flashing kernels so i'm guessing it's not needed?
I'm for sure going to take your recommendation and make a backup of current rom and kernel. Would you recommend Rom Manager to backup the current rom? I see an option that says "Backup current rom" in the application. How do you go about backing those up?
Thank you again! :fingers-crossed:
since I have the cwm-based recovery v5.5.0.4 i'm wondering if I were to use rom manager and flash the latest clockworkmod recovery, would it actually stick after the reboot?
found the following thread here and it looked almost identical to mine: http://forum.xda-developers.com/showthread.php?t=1801534&highlight=cwm-based+recovery
Ended up using rom manager to flash clockworkmod and after rebooting multiple times and booting into recovery, the official clockworkmod recovery is installed. (showing "ClockworkMod 6.0.1.2" now)
As for backing up kernel and everything else, will rom manager do that as well?
Thank you
Hi,
I'm new here so please go easy on this "noob"
It was my first to unlock and root my phone, followed by flashing a stock ROM (Which is exactly why I rooted it)
I flashed this JB 4.2.2 stock build [ROM] [OTA][GSM] Android 4.2.2 JDQ39: Rooted | Galaxy Nexus > XDA for my Galaxy Nexus
Now...
I can't disable Next-word suggestions in the Language & Input -> Google Keyboard Settings
Also, I noticed a few seconds of lag when pressing the power button to unlock the phone, when viewing recent apps (via the soft-key), and when opening the Camera too
Also, when I choose the "Recent Apps" soft key.. it's as the app that's currently being used is minimised and the homescreen is shown without any icons
The Build came with Busybox pre-installed and now its gone after a day of using my phone... I literally can't find it.
I searched in the play store "BusyBox" and the result is 3 different apps with the same name!
Any Advice?
AMKhatri said:
Hi,
I'm new here so please go easy on this "noob"
It was my first to unlock and root my phone, followed by flashing a stock ROM (Which is exactly why I rooted it)
I flashed this JB 4.2.2 stock build [ROM] [OTA][GSM] Android 4.2.2 JDQ39: Rooted | Galaxy Nexus > XDA for my Galaxy Nexus
Now...
I can't disable Next-word suggestions in the Language & Input -> Google Keyboard Settings
Also, I noticed a few seconds of lag when pressing the power button to unlock the phone, when viewing recent apps (via the soft-key), and when opening the Camera too
Also, when I choose the "Recent Apps" soft key.. it's as the app that's currently being used is minimised and the homescreen is shown without any icons
The Build came with Busybox pre-installed and now its gone after a day of using my phone... I literally can't find it.
I searched in the play store "BusyBox" and the result is 3 different apps with the same name!
Any Advice?
Click to expand...
Click to collapse
go back to recovery, format/wipe /system partition, reflash rom.
For your reference, a good app to install bb is stephen (stericsson)'s busybox installer (play store link). Obviously, it needs root.
Next time, read the stickies.
http://forum.xda-developers.com/showthread.php?t=1812959
How do I get “root”?
If you are booted into a custom recovery (recoveries will be covered later), root is enabled by default. If you want root while booted into Android, you will need to place two files on your system partition: an “su” binary which grants root access, and a superuser app that manages that access. The two that are available are ChainsDD’s Superuser and Chainfire’s SuperSU. Usually these files are packaged up in a zip file that is flashable using a custom recovery, but they can be flashed manually using ADB. Both of these methods will be described below.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=26328017&postcount=123
As you probably noticed by now, you didn't need to flash a full "custom stock ROM" to root.
beekay201 said:
go back to recovery, format/wipe /system partition, reflash rom.
For your reference, a good app to install bb is stephen (stericsson)'s busybox installer (play store link). Obviously, it needs root.
Next time, read the stickies.
http://forum.xda-developers.com/showthread.php?t=1812959
http://forum.xda-developers.com/showpost.php?p=26328017&postcount=123
As you probably noticed by now, you didn't need to flash a full "custom stock ROM" to root.
Click to expand...
Click to collapse
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PS: Do you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
AMKhatri said:
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PSo you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
Click to expand...
Click to collapse
You can wipe the system partition in a custom recovery (dont know if you can with stock). And yes you could flash via ROM manager but I wouldnt recommend it. I am on XenonHD 11.1 and loving it. But roms are a personal choice so there is no 'best' ROM. Just try out.
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
You can wipe the system partition in a custom recovery (dont know if you can with stock). And yes you could flash via ROM manager but I wouldnt recommend it. I am on XenonHD 11.1 and loving it. But roms are a personal choice so there is no 'best' ROM. Just try out.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
The tutorial I followed didn't mention using the ROM manager, but I had not choice.. becuase whenever I went into fastboot mode manually, it got stuck on the screen displaying Google (I waited for minutes without any luck)
How would you recommend CyanogenMod 10.1.2 against the stock 4.2.2 which I have currently?
I read these threads as well whereby they said that there is no "real" solution to the issues:
http://forum.xda-developers.com/showthread.php?t=2178962
http://forum.xda-developers.com/showthread.php?t=2363872
AMKhatri said:
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PS: Do you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
Click to expand...
Click to collapse
Mr., please, read the LINK i gave you! THIS ONE ->>>> http://forum.xda-developers.com/showthread.php?t=1812959
If you read it, you'll stop thinking you need to be doing anything at this point in FASTBOOT interface! Like mrgnex says, you need to be on a custom recovery to format /system. (Have you read the link yet? By now you should know that the /system partition and the /sdcard/ (aka userdata) are 2 different things!)
mrgnex said:
You can wipe the system partition in a custom recovery (dont know if you can with stock). (...) roms are a personal choice so there is no 'best' ROM. Just try out.
Click to expand...
Click to collapse
+1
For your reference, you can't erase /system in stock recovery.
AMKhatri said:
The tutorial I followed didn't mention using the ROM manager, but I had not choice.. becuase whenever I went into fastboot mode manually, it got stuck on the screen displaying Google (I waited for minutes without any luck)
How would you recommend CyanogenMod 10.1.2 against the stock 4.2.2 which I have currently?
I read these threads as well whereby they said that there is no "real" solution to the issues:
http://forum.xda-developers.com/showthread.php?t=2178962
http://forum.xda-developers.com/showthread.php?t=2363872
Click to expand...
Click to collapse
Stop! THERE'S NO NEED FOR FASTBOOT HERE!
Thanks Guys for replying.
Yes, I read the info in the link, it was very helpful.
I'm still confused though.. "Fast boot" and "Recovery" are they the same thing?
I tried a "fix" mentioned by someone about using a live wallpaper such as "Water", I tried it and it's been 1/2 hour and it's really smooth compared to before...
Yes, I do have a custom recovery, actually I don't know why, but It seems I've got two according to ROM Manager.
It says I've got Clockwork Mod Recovery & TWRP.
I also tried going into recovery (Volume up + Down + Power) and it worked this time, when I select recovery, it goes into CWRM
I also did a bit of research about CyanogenMod 10.1.2 and from what I could gather it's liked by people a lot.
I'm guessing that definitely some time ahead it'll get all "laggy" again, Is there any reason according to you why I shouldn't install it compared to the stock 4.2.2 I have?
AMKhatri said:
Thanks Guys for replying.
Yes, I read the info in the link, it was very helpful.
I'm still confused though.. "Fast boot" and "Recovery" are they the same thing?
I tried a "fix" mentioned by someone about using a live wallpaper such as "Water", I tried it and it's been 1/2 hour and it's really smooth compared to before...
Yes, I do have a custom recovery, actually I don't know why, but It seems I've got two according to ROM Manager.
It says I've got Clockwork Mod Recovery & TWRP.
I also tried going into recovery (Volume up + Down + Power) and it worked this time, when I select recovery, it goes into CWRM
I also did a bit of research about CyanogenMod 10.1.2 and from what I could gather it's liked by people a lot.
I'm guessing that definitely some time ahead it'll get all "laggy" again, Is there any reason according to you why I shouldn't install it compared to the stock 4.2.2 I have?
Click to expand...
Click to collapse
So to get things clear:
No fastboot and recovery arent the same thing.
Vol up+down+power brings you into fast boot and not recovery.
Apparently you dont have 2 custom recoverys since you booted into cwm.
Cm10 is great. But there are many great roms out there. You can start off with cm and then (if you please) look further.
I dont see any reason to not install cm10.1.2 since a whole team built and optimized it. So basically it is a better stock.
When you think your phone is slow you should look into the custom kernels. Thats a different story which I will not begin before you want to
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
So to get things clear:
No fastboot and recovery arent the same thing.
Vol up+down+power brings you into fast boot and not recovery.
Apparently you dont have 2 custom recoverys since you booted into cwm.
Cm10 is great. But there are many great roms out there. You can start off with cm and then (if you please) look further.
I dont see any reason to not install cm10.1.2 since a whole team built and optimized it. So basically it is a better stock.
When you think your phone is slow you should look into the custom kernels. Thats a different story which I will not begin before you want to
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Thanks! Now it's definitely clear!
I'll download CM10.1.2 tomorrow and will decide to install it once Stock JB 4.2.2 starts acting up again.
In the meantime I'll read on about kernels, please keep don't close this thread...yet.
clerk usdEuro
I've decided that I will test out the Rom that I have currently (4.2.2) for a few weeks, and then flash CM.
I wanted to know one more thing, Is it bad to flash ROMs to your phone every now and then?
Because I've seen people flashing different ROMs on their phone, I don't wanna damage my phone as I want it to last as long as I can make it.
(by "Bad" I mean... does it reduce the phone's life or it's hardware's life span)
AMKhatri said:
I've decided that I will test out the Rom that I have currently (4.2.2) for a few weeks, and then flash CM.
I wanted to know one more thing, Is it bad to flash ROMs to your phone every now and then?
Because I've seen people flashing different ROMs on their phone, I don't wanna damage my phone as I want it to last as long as I can make it.
(by "Bad" I mean... does it reduce the phone's life or it's hardware's life span)
Click to expand...
Click to collapse
No it can't. I was a flashaholic (until I discovered XenonHD) and my phone didn't got worse. Only overclocking the CPU and gpu can affect the life of the CPU or gpu (or both XD). Just do a fresh install everytime and read the post of the ROM of your choice to see what to do to get it working optimally. If you have any problems just ask.
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
No it can't. I was a flashaholic (until I discovered XenonHD) and my phone didn't got worse. Only overclocking the CPU and gpu can affect the life of the CPU or gpu (or both XD). Just do a fresh install everytime and read the post of the ROM of your choice to see what to do to get it working optimally. If you have any problems just ask.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Thanks...
I'll flash CM in a week or two, as I'm on a tight schedule currently, and I also wanna note down the average battery time I get out of 4.2.2
So... since 4.3 is now out, I was thinking it'd be better for me to flash it other than anything else.
I'll most probably download the stock rom from:
https://developers.google.com/android/nexus/images#yakjujwr66v
So far I came across this thread having the steps to flash 4.3
http://forum.xda-developers.com/showthread.php?t=2377307
But I wanna flash it and lose my data, so that it's as fresh as it can be...
Will that work if I use "wugfresh root toolkit"?
AMKhatri said:
So... since 4.3 is now out, I was thinking it'd be better for me to flash it other than anything else.
I'll most probably download the stock rom from:
https://developers.google.com/android/nexus/images#yakjujwr66v
So far I came across this thread having the steps to flash 4.3
http://forum.xda-developers.com/showthread.php?t=2377307
But I wanna flash it and lose my data, so that it's as fresh as it can be...
Will that work if I use "wugfresh root toolkit"?
Click to expand...
Click to collapse
With the stock package there is no need for a toolkit.
Hell, there's no reason for a toolkit any time.
Sent from my Galaxy Nexus
Pirateghost said:
With the stock package there is no need for a toolkit.
Hell, there's no reason for a toolkit any time.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
What was I thinking...
I apologize guys... I guess I wasn't thinking straight as its past midnight here...
So just to clarify stuff so that I don't end up doing something wrong:
-> Head into Recovery Mode (with usb debugging enabled... connect usb cable to phone and pc)
-> Wipe System
-> Wipe Cache
-> Install from SD card (select .zip file)
right?
Also, I performed a backup of the applications I have via Titanium Backup, They'll work on 4.3 when I restore them right? or do you recommend downloading them from the play store again?
Sorry for being such a noob, and Thanks for your responses!
backup everything from your /sdcard to your computer, titanium backups and a nandroid
the google stock package is NOT flashable in CWM/TWRP
if you follow the GOOGLE instructions it WILL wipe your device (remember that backup you made of everything?)
alternatively you can make sure and have adb/fastboot working on your computer properly, extract all the files out of the zip (including the tar.gz located inside), and in recovery, do a factory reset, then boot to fastboot, fastboot flash system and boot ....
as for Titanium Backup, there is a work around to get it working on 4.3, but root is lacking full power.
Pirateghost said:
backup everything from your /sdcard to your computer, titanium backups and a nandroid
the google stock package is NOT flashable in CWM/TWRP
if you follow the GOOGLE instructions it WILL wipe your device (remember that backup you made of everything?)
alternatively you can make sure and have adb/fastboot working on your computer properly, extract all the files out of the zip (including the tar.gz located inside), and in recovery, do a factory reset, then boot to fastboot, fastboot flash system and boot ....
as for Titanium Backup, there is a work around to get it working on 4.3, but root is lacking full power.
Click to expand...
Click to collapse
Thanks!
I'm now on Android 4.3
I'm full of excitement atm :victory:
I took a backup of my apps using titanium backup, I installed it but can't use it, it says I need root (which I already had before).
I read online somewhere that I need to root again, but I don't wanna lose all my data/ apps I installed again...
Any ideas?
If I use Wugfresh Nexus Root Toolkit... will I lose my data?
Thanks for the continued support!
AMKhatri said:
Thanks!
I'm now on Android 4.3
I'm full of excitement atm :victory:
I took a backup of my apps using titanium backup, I installed it but can't use it, it says I need root (which I already had before).
I read online somewhere that I need to root again, but I don't wanna lose all my data/ apps I installed again...
Any ideas?
If I use Wugfresh Nexus Root Toolkit... will I lose my data?
Thanks for the continued support!
Click to expand...
Click to collapse
Seriously, how hard can it be for you people to waste 5, 5!!! minutes to browse the forums.
http://forum.xda-developers.com/showthread.php?t=2377318
Thanks!
According to a friend's recommendation I used Wugfresh Nexus Root Toolkit to Root, and surprisingly didn't lose any of my data!
Once again, Thanks for all the help everyone... You've all been quite helpful.
Alright so I'm new at this and haven't managed to brick my phone yet so that's a good sign.
As far as I've learned the process is Root>Recovery>Rom Flash, at least generally.
I rooted it successfully, but when I try to install recovery with ROM Manager it lists only one S3 with a bracketed cell phone provider I don't think I have. So I ditched CWM and went to Goo Manager but when I try to install that, it just hangs on some download page telling me its about to start.
So I'm going to assume the recovery thing is pretty easy to sort out and move on to my next question.
My S3 is unlocked, but I am under Koodo, which is an extension of Telus. My phone model is a I747M, not an I747. As far as I can see they are identical in hardware and software, but I'm really wondering what ROMs I can install. I've researched but didn't find much, and I don't want to blindly flash a i747 rom onto a potentially different phone, and risk anything.
Oh and PS any ROM with the vanilla android (like on the google phones) will do.
Thanks.
Czaran said:
Alright so I'm new at this and haven't managed to brick my phone yet so that's a good sign.
As far as I've learned the process is Root>Recovery>Rom Flash, at least generally.
I rooted it successfully, but when I try to install recovery with ROM Manager it lists only one S3 with a bracketed cell phone provider I don't think I have. So I ditched CWM and went to Goo Manager but when I try to install that, it just hangs on some download page telling me its about to start.
So I'm going to assume the recovery thing is pretty easy to sort out and move on to my next question.
My S3 is unlocked, but I am under Koodo, which is an extension of Telus. My phone model is a I747M, not an I747. As far as I can see they are identical in hardware and software, but I'm really wondering what ROMs I can install. I've researched but didn't find much, and I don't want to blindly flash a i747 rom onto a potentially different phone, and risk anything.
Oh and PS any ROM with the vanilla android (like on the google phones) will do.
Thanks.
Click to expand...
Click to collapse
Hello Noob (I mean that kindly, I used to be one)
I'll help you with what ever you need. I'm Canadian and on Bell i747M. Feel free to ask me any questions and I'll reply as soon as I can. Hopefully I wont be too confusing. I'll just try to break down all your questions in a point form.
First, i747 and i747M are almost identical. With the latest 4.3 ROMS there are differences in the bootloader that will make data not work on your phone. For now, stay away from any stock 4.3 ROM. AOSP ROMs (CM10, Task650) are fine.
Recovery: Through Rom Manager you will want to download the recovery titled "Samsung Galaxy S3 (ATT) " The AT&T version of the S3 is commonly shown as D2ATT(i747). This recovery will work for you. I have had a problem with TWRP myself recently being stuck on the download page. There is another way to install TWRP, but it is a bit more difficult. Try CWM first and if you like I will give you instructions for TWRP.
ROMs: If you want the most common and most stable Vanilla ROMs for your phone you are gonna want Cyanogenmod or Task's ROM. They are very similar with a few different features. Beware, if you ask questions in Task's thread you will be told it is an ATT ROM only. It does work on the i747M though.
Latest Cyanogen: http://download.cyanogenmod.org/?device=d2att
Latest Task : http://forum.xda-developers.com/showthread.php?t=1766684
You will of course lose Touchwiz on these ROMs.
Touchwiz Roms:
STAY AWAY FROM 4.3 ROMS!!!!!!
These ones will do as is. Watch that they are still 4.1.2
http://forum.xda-developers.com/showthread.php?t=1766684 This one has a white theme and is my favorite.
http://forum.xda-developers.com/showthread.php?t=2176793 This one has tons of options.
As always be sure to read the OP in every thread. You will learn lots there. If you want any more info reply and I will try and help.
BCSC said:
Hello Noob (I mean that kindly, I used to be one)
I'll help you with what ever you need. I'm Canadian and on Bell i747M. Feel free to ask me any questions and I'll reply as soon as I can. Hopefully I wont be too confusing. I'll just try to break down all your questions in a point form.
First, i747 and i747M are almost identical. With the latest 4.3 ROMS there are differences in the bootloader that will make data not work on your phone. For now, stay away from any stock 4.3 ROM. AOSP ROMs (CM10, Task650) are fine.
Recovery: Through Rom Manager you will want to download the recovery titled "Samsung Galaxy S3 (ATT) " The AT&T version of the S3 is commonly shown as D2ATT(i747). This recovery will work for you. I have had a problem with TWRP myself recently being stuck on the download page. There is another way to install TWRP, but it is a bit more difficult. Try CWM first and if you like I will give you instructions for TWRP.
ROMs: If you want the most common and most stable Vanilla ROMs for your phone you are gonna want Cyanogenmod or Task's ROM. They are very similar with a few different features. Beware, if you ask questions in Task's thread you will be told it is an ATT ROM only. It does work on the i747M though.
Latest Cyanogen: http://download.cyanogenmod.org/?device=d2att
Latest Task : http://forum.xda-developers.com/showthread.php?t=1766684
You will of course lose Touchwiz on these ROMs.
Touchwiz Roms:
STAY AWAY FROM 4.3 ROMS!!!!!!
These ones will do as is. Watch that they are still 4.1.2
http://forum.xda-developers.com/showthread.php?t=1766684 This one has a white theme and is my favorite.
http://forum.xda-developers.com/showthread.php?t=2176793 This one has tons of options.
As always be sure to read the OP in every thread. You will learn lots there. If you want any more info reply and I will try and help.
Click to expand...
Click to collapse
Awesome, I appreciate the writeup. So I flashed recovery successfully (ROM Manager doesn't seem to have d2att anymore so I used ODIN).
I'll probably go for Cyanogen mod tommorow, I'll post again if I have any questions.
Thanks.
Czaran said:
Awesome, I appreciate the writeup. So I flashed recovery successfully (ROM Manager doesn't seem to have d2att anymore so I used ODIN).
I'll probably go for Cyanogen mod tommorow, I'll post again if I have any questions.
Thanks.
Click to expand...
Click to collapse
CM is a good ROM. There should soon be Kitkat versions available. You will be seeing nightly updates when it does come around. Before you start flashing, you should learn what a 'Nandroid' is. You can take a Nandroid backup in CWM or TWRP. Always save these to an External SD card. If anything ever goes wrong with your ROM, you can just re flash the Nandroid backup and be back to where you were the day you did the backup. The farther you get into flashing the more likely you will need these. Before doing your first Flash, do an Nandroid and copy your photops and stuff off of the phone. When jumping between Stock and AOSP roms, you will need to do a full wipe and will lose what you have not backed up. Be sure to sync contacts to Google....this is the one that has screwed me the most.
BCSC said:
CM is a good ROM. There should soon be Kitkat versions available. You will be seeing nightly updates when it does come around. Before you start flashing, you should learn what a 'Nandroid' is. You can take a Nandroid backup in CWM or TWRP. Always save these to an External SD card. If anything ever goes wrong with your ROM, you can just re flash the Nandroid backup and be back to where you were the day you did the backup. The farther you get into flashing the more likely you will need these. Before doing your first Flash, do an Nandroid and copy your photops and stuff off of the phone. When jumping between Stock and AOSP roms, you will need to do a full wipe and will lose what you have not backed up. Be sure to sync contacts to Google....this is the one that has screwed me the most.
Click to expand...
Click to collapse
Alright, so I have CWM v5.5.0.4, which from what I understand is pretty outdated. It was probably just me following an outdated guide and forgot to look up an updated version. Will I need to update of will it cause any problems? I already backed up my phone on 5.5.0.4 with Nandroid.
Also I feel like I'm misunderstanding the procedure of flashing a new rom. So I downloaded a cm-10.1.3 zip which is is the latest stable build on android 4.2.2. This has an .img inside so this is the rom. I use CWM to flash this onto my phone correct? (Once I figure out if I need to update CWM)
Lastly whats the deal with Gapps? I downloaded the CM Gapps for 10.1 from their wiki. Is this the only way to get Gmail, Maps, and the Google Play Store onto the phone?
From what I understand I think I can just use odin to flash, correct? If so I'd probably prefer that because its the most familiar and noob friendly.
Czaran said:
Alright, so I have CWM v5.5.0.4, which from what I understand is pretty outdated. It was probably just me following an outdated guide and forgot to look up an updated version. Will I need to update of will it cause any problems? I already backed up my phone on 5.5.0.4 with Nandroid.
Also I feel like I'm misunderstanding the procedure of flashing a new rom. So I downloaded a cm-10.1.3 zip which is is the latest stable build on android 4.2.2. This has an .img inside so this is the rom. I use CWM to flash this onto my phone correct? (Once I figure out if I need to update CWM)
Lastly whats the deal with Gapps? I downloaded the CM Gapps for 10.1 from their wiki. Is this the only way to get Gmail, Maps, and the Google Play Store onto the phone?
From what I understand I think I can just use odin to flash, correct? If so I'd probably prefer that because its the most familiar and noob friendly.
Click to expand...
Click to collapse
I wouldn't use Odin. It really will only become necessary if you want to flash back to complete stock.
You do want the latest version of CWM installed or you will run into problems flashing. You can get this 2 ways.
1: through Rom Manager. You will find your specific CWM with these steps. a-Recovery Setup b-ClockworkMod Recovery c-Hit menu button to left of home and pick 'Show All Devices' d- Here scroll until you get 'Samsung Galaxy S3 (AT&T)' D2ATT. e- Click Flash ClockworkMod Recovery. Allow permissions for root. Ignore the touch option unless you want to pay for it. I can teach you the free way.
You will now have the latest CWM
You can download the latest CM-10.2, it is in release candidate stage and is extremely stable. They have been working on it for months. It will give you 4.3 (The good kind, not the one I warned against). After downloading a ROM, you leave it zipped exactly like it is. Do not extract it, just move it to your SD card. You will also want Gapps. Gapps is necessary because it is Google's own software that is legally not allowed to be built into ROMs. It must be installed separately. You can find those here. They help you know which to use with chart depending on which Cyanogen you use http://wiki.cyanogenmod.org/w/Gapps. Again just move the zip over to your internal.
With these 2 zips transferred to your phone you are ready to start. Before you do, make sure you have transferred all your pics and stuff off of the phone. Also be sure to save your contacts. You can now boot into recovery. You should notice recovery version 6.0.4.3. Volume button scrolls menu, Power button selects. You will want to do a Nandroid backup in case anything goes wrong. I know you did one with CWM 5.5 but should do another just to be sure it is with current CWM. You can delete the other one later.
Goto - backup and restore
Goto - backup to external or /storage/sdcard1 (i put both because im already on 4.4 and may have different menu than you.
Let this work and when done continue to flashing ROM
Go to 'choose zip from /sdcard'
Select CM-10-xxxxxxx.zip
After this completes you will do the same with Gapps.zip
After completion of both files you will need to factory reset your phone. Flashing AOSP over Stock will cause boot loops if you do not.
Go back to CWM main menu and select wipe data/factore reset
After completing this go to wipe cache partition and select this.
Finally you want to wipe Dalvik cache. you will find this in CWM under main menu /advanced/wipe dalvik cache.
Upon completion of this you should have CM10 4.3 running. Just exit CWM reboot phone and when booted follow setup instructions.
Let me know if you get stuck somewhere.
BCSC said:
Upon completion of this you should have CM10 4.3 running. Just exit CWM reboot phone and when booted follow setup instructions.
Let me know if you get stuck somewhere.
Click to expand...
Click to collapse
Alright cool. So through Mod Manager, there was not d2att, there was only S3(Metro PCS) which I thought was a bit odd. I found a way to flash an updated recovery via terminal emulator so that went well.
And your steps were very well written and concise. I'm now running CM without a problem.
Thanks for your help!
Czaran said:
Alright cool. So through Mod Manager, there was not d2att, there was only S3(Metro PCS) which I thought was a bit odd. I found a way to flash an updated recovery via terminal emulator so that went well.
And your steps were very well written and concise. I'm now running CM without a problem.
Thanks for your help!
Click to expand...
Click to collapse
Cool terminal emulator was that other way to do it. Hope all is well for you with this. Welcome to flashing. As another tip, if you are going to flash a lot, there is an app called Titanium backup that is well worth the $5 it costs. It saves all your apps and data and after a clean wipe you can just reinstall all your apps in one step. For example after a wipe you will not lose your Angry Birds levels if you restore your titanium data. It's worth a look.