I replaced my housing recently and the touch screen is not responding properly, but the LCD is working fine. Could i buy the touch screen alone and replace them ?
http://www.ebay.com/itm/New-Black-R...sson-Xperia-Arc-X12-DE-/331076351509#shpCntId
Most of the items are together i mean, the LCD + TOuch screen. IS it possible to replace the touch screen alone?
Related
Hi all, i recently bought a new touch panel for my HOX couse the old one is semi working due a fall. With great surprise i see that the original lcd is literally attached to touch glass. So trying to remove original touch, is equal to break original LCD. And this happen to me. However, i bough the a new lcd and finally remount my HOX. But there something strange. The touch is in contact with the display, stange artifacts are visible on the screen on the contact points and the touch has only a semi working response. I've tried to move away the touch from the lcd to be sure that the new components are working...and infact are working well. So i understood thath i must use something to prevent the touch came in contact with the LCD. What can or must i use to complete the remount? Thanks
stalvatero said:
Hi all, i recently bought a new touch panel for my HOX couse the old one is semi working due a fall. With great surprise i see that the original lcd is literally attached to touch glass. So trying to remove original touch, is equal to break original LCD. And this happen to me. However, i bough the a new lcd and finally remount my HOX. But there something strange. The touch is in contact with the display, stange artifacts are visible on the screen on the contact points and the touch has only a semi working response. I've tried to move away the touch from the lcd to be sure that the new components are working...and infact are working well. So i understood thath i must use something to prevent the touch came in contact with the LCD. What can or must i use to complete the remount? Thanks
Click to expand...
Click to collapse
And that is the reason why you can find lcd panel + touch assembly (yes its more expensive), touch panel is already glued to lcd with "special" compound. It is not glued actually, more like adhesive compound.. When you broke lcd you should go for lcd+touch..
But you can check this one, maybe you find some answers :http://forum.xda-developers.com/showthread.php?t=1720900 and here :http://www.repairsuniverse.com/htc-one-x-screen-repair-video.html
I tested the phone's touch screen using the *#*#SERVICE*#*# and it seems that it stops registering any touches right above the dot for the back button.
Does buying a replacement digitizer from ebay works?
Hi, my screen broke and I purchased a digitizer and a screen off ebay seperately. Both seem to be working properly, however when I put the digitizer on the screen and plug both (without reassembling the entire device) the digitizer goes ape**** and starts randomly registering touches. Why is that and how do I fix that?
Did anyone try to change the Touch Screen Digitizer on this device and not the LCD? So, to take off the Touch Screen Digitizer from the LCD and put a new on. If yes, a few tips would be good or if you know a video about it.
Thanks!
Our tablet stopped responding to touch, so I replaced the screen and digitizer (as I have before when the screen cracked). Unfortunately, this did not fix the issue. It boots up just fine, but screen does not respond to touch. What is the next thing I should check?