Touch screen problem on Xperia S - Sony Xperia S, Acro S, Ion

I tested the phone's touch screen using the *#*#SERVICE*#*# and it seems that it stops registering any touches right above the dot for the back button.
Does buying a replacement digitizer from ebay works?

Related

Desire disassemble now Display won't work

Hello,
I disassemble my Desire to replace the cover of it. The AMOLED display and the touch screen worked with no problems. I disassemble every part but had some problems by removing the touch screen so it was broken in one corner. I ignored it, replaced the cover, put all back together and attached connectors for display, keyboard and touchscreen. After that I start the phone but now I get only a black screen. I see nothing on the display but my phone starts because I feel the vibration and the lights of the buttons are glowing.
So, is there any option to fix that or is it now completly broken? I'm really sad because it worked with no problems a few hours ago and because of this cover replacement I have no video screen now.
On Ebay I can get a new AMOLED Display for 40$ (30-40€). Should I try this or is maybe the main PCB broken? The broken glass of the touch screen can not cause this problem, wouldn't it?
Greets,
Burak

[Q] Galaxy Nexus screen don't turn on after a crash

Hi, I've dropped my phone and now the screen does not turn on.
The touch works, i can receive calls (and talk) and the glass is not working.
It seems that something disconnected from inside.
Any suggestion? Open the phone and review something?
Thanks!
Wait what? The touch works but the glass doesn't? They are the same piece. You've got the LCD panel which is the screen display itself and the digitizer which registers touch, in other words the glass component.
Which of the two does not work?
Since he claims he can answer calls, it appears to me the screen is still registering touch input (I assume he swipes the screen even though it stays black).

Dead strip in touch screen after screen replacement.

Hello XDA,
I dropped my phone a while ago and the outer screen got cracked, nothing happened to the screen it self, so i kept using my phone for a month or so before i found a place to replace the outer frame only, the screen used to work perfectly, after i changed the frame, i had touch problems, so i decided to change the whole screen, after changing the screen i had a dead strip, the touch is not responding in that area, here is a screen shot, Could it be a problem with the new screen/digitizer or connection problem? Please direct me.

[Q] How to put together Digitizer and Screen properly

Hi, my screen broke and I purchased a digitizer and a screen off ebay seperately. Both seem to be working properly, however when I put the digitizer on the screen and plug both (without reassembling the entire device) the digitizer goes ape**** and starts randomly registering touches. Why is that and how do I fix that?

Touch screen - digitizer replaced

Our tablet stopped responding to touch, so I replaced the screen and digitizer (as I have before when the screen cracked). Unfortunately, this did not fix the issue. It boots up just fine, but screen does not respond to touch. What is the next thing I should check?

Categories

Resources