I attempted to flash a 4.4.2 rom yesterday but it couldnt and it gave me a status 7 error. I looked it up and people said that you have to update clockworkmod. Well i tried to through terminal but it couldn't. It said something like could not find directory. So if anyone has any idea what I can do pleast tell me.
Using Galaxy s3 sgh-i747 on PA 3.99.1 ROM
Flash Philz Touch from here via Odin (use the tar version in PDA): http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
alright i did it through odin and it worked..now im gonna make a backup again and try flashing a rom. hope it works. thanks for the help
If you can't flash a KK ROM, you may need to update your bootloader. If you're not on a 4.3 bootloader, try and avoid it for now.
audit13 said:
If you can't flash a KK ROM, you may need to update your bootloader. If you're not on a 4.3 bootloader, try and avoid it for now.
Click to expand...
Click to collapse
im on a 4.3 rom but if i get error status 7 again ill just restore my backup and avoid it...is there a 4.3 bootloader? Also i was about to wipe it but its asking me wipe data/factory reset or clean to install a new ROM. I suggest its the 2nd one but if i do it and it doesnt work can i still restore my backup?
orlans21 said:
im on a 4.3 rom but if i get error status 7 again ill just restore my backup and avoid it...is there a 4.3 bootloader? Also i was about to wipe it but its asking me wipe data/factory reset or clean to install a new ROM. I suggest its the 2nd one but if i do it and it doesnt work can i still restore my backup?
Click to expand...
Click to collapse
There is a 4.3 bootloader that would be installed if you ran an OTA update to 4.3 or you manually installed the 4.3 bootloader.
Did you make your backup using Philz? If not, make the backup using Philz, then wipe and install.
audit13 said:
There is a 4.3 bootloader that would be installed if you ran an OTA update to 4.3 or you manually installed the 4.3 bootloader.
Did you make your backup using Philz? If not, make the backup using Philz, then wipe and install.
Click to expand...
Click to collapse
I just made a backup on Philz and im not sure if i installed a 4.3 bootloader manually or OTA. Just to be clear im wiping to install ROM. so the 2nd option
orlans21 said:
I just made a backup on Philz and im not sure if i installed a 4.3 bootloader manually or OTA
Click to expand...
Click to collapse
Doesn't really matter but it's good to know that you need to stay away from any attempts to downgrade the bootloader.
hahah why would i want to downgrade?
orlans21 said:
hahah why would i want to downgrade?
Click to expand...
Click to collapse
I have seen posts where people bricked their phone when trying to return to a stock ROM using Odin.
well...im gonna have to put it back to a stock rom when i get a new phone and give this to my dad...i still have the 4.1 stock downloaded on my computer...i dont even remember how to put it back now lol. so i should try flashing a 4.4.2 rom? which rom do you prefer? i have carbon and liquidsmooth. i want halo like i do on PA and both have it i believe
orlans21 said:
well...im gonna have to put it back to a stock rom when i get a new phone and give this to my dad...i still have the 4.1 stock downloaded on my computer...i dont even remember how to put it back now lol
Click to expand...
Click to collapse
You can't restore to a completely stock ROM not that you have a 4.3 bootloader. AT&T never released a full 4.3 stock ROM, only an update to 4.3 from an earlier stock ROM.
If you did not have a 4.3 bootloader, you could install any stock AT&T ROM such as 4.1.1. Being able to restore to stock 4.1.1 would also allow you to sim unlock your phone for free, if necessary.
audit13 said:
You can't restore to a completely stock ROM not that you have a 4.3 bootloader. AT&T never released a full 4.3 stock ROM, only an update to 4.3 from an earlier stock ROM.
Click to expand...
Click to collapse
well im on rogers and its the same as att. i still have the original samsung touchwiz 4.1 rom just incase anything happens.
Your original post said you have an sgh-i747 which is an AT&T model. If you have a Rogers s3, it's an sgh-i747m.
Regardless of which model you have, you can't downgrade from any 4.3 bootloader which means you can't completely revert back to 4.1.1. The best you could do would be to run 4.1.1 on a 4.3 bootloader.
audit13 said:
Your original post said you have an sgh-i747 which is an AT&T model. If you have a Rogers s3, it's an sgh-i747m.
Regardless of which model you have, you can't downgrade from any 4.3 bootloader which means you can't completely revert back to 4.1.1. The best you could do would be to run 4.1.1 on a 4.3 bootloader.
Click to expand...
Click to collapse
sorry i should have included the m lol. i wont worry about going back to 4.1 until the galaxy s5 comes out and im ready to give it to my dad. but back to focusing on this. im about to attempt to flash a 4.4.2 rom. either liquidsmooth or carbon. what do you like?
I prefer Validus version 4.3 because it includes Nova Launcher and it has a dark UI theme.
but thats 4.3. i wanna be on 4.4 and im installing nova and making it the way i had it before.
wait a second is it a 4.4 rom?
orlans21 said:
but thats 4.3. i wanna be on 4.4 and im installing nova and making it the way i had it before.
wait a second is it a 4.4 rom?
Click to expand...
Click to collapse
It is a 4.4.2-based rom. The release is version 4.3.
hmm interesting...you do recommend it? what great features does it come with?
I like it because it's a very stripped-down ROM, has a dark UI, and is AOSP-based.
It's not radically different from other ROMs but has exactly what I want. I run the same ROM on a Nexus 4 and Motorola Atrix HD.
Related
For those of you who keep getting stuck on the splash screen after trying to restart your phone after installing a 4.3 ROM.
My steps were (and I take no credit for this, I can't remember who had said to do this and I wasn't logged in so I couldn't click the thank you button):
*Note* If you were already on the Stock 4.3 ROM you do not want to flash the 4.0.4, 4.1.1 or 4.1.2 Stock ROM since you will brick your phone. The Stock ROM contains the Bootloader which should never be downgraded. Fyi: the Bootloader is not the Baseband, the Baseband is just what Modem you're using.
1. Use Odin to flash the latest stock ROM
2. Enter the stock recovery and do a factory reset and clear the cache (I did both twice just to make sure)
3. Use Odin to flash the stock rooted ROM.
4. Enter the stock recovery and do a factory reset and clear the cache. (This might not be necessary but I did anyways just to make sure)
5. Use Odin to flash a custom recovery (TWRP 2.6.0.0 was the newest recovery when I did this last week)
6. Enter the custom recovery and wipe everything, then flash whatever 4.3 based ROM and then flash GApps if you want.
*Note* It seemed like the phone was hanging on the splash screen after either the initial boot or the first restart (I can't remember which, it's been a week) but it did boot and reboot fine.
I hope this helps out some people since I found it to be quite irritating that I could install a 4.3 ROM and set everything up but when I went to restart it would hang at the splash screen (going into the recovery and clearing the cache/dalvik cache wasn't helping).
Are you basically saying to revert back to stock settings and redo the entire root process again?
Sent from my SGH-I747 using xda app-developers app
bullet2binary said:
Are you basically saying to revert back to stock settings and redo the entire root process again?
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yeah, from what I had read that seemed to be necessary since I had used Odin to update the bootloader (MF1 since my phone is the M variant) by itself when the newest Stock ROM had come out a while ago. I still flashed the newest Stock ROM (same MF1 bootloader for the M variant) but the first time I did it I forgot to enter the Stock Recovery to do a Factory Reset and Clear the Cache and ended up stuck on the splash screen of a 4.3 ROM after flashing a custom recovery. So I needed to reflash back to stock and start over.
Going into the Stock Recovery and doing a Factory Reset and Clearing Cache is necessary and doesn't take much time at all so you may as well do it just to be sure. I also recommend backing up your IMEI if you haven't done it yet.
spongdangly said:
Yeah, from what I had read that seemed to be necessary since I had used Odin to update the bootloader (MF1 since my phone is the M variant) by itself when the newest Stock ROM had come out a while ago. I still flashed the newest Stock ROM (same MF1 bootloader for the M variant) but the first time I did it I forgot to enter the Stock Recovery to do a Factory Reset and Clear the Cache and ended up stuck on the splash screen of a 4.3 ROM after flashing a custom recovery. So I needed to reflash back to stock and start over.
Going into the Stock Recovery and doing a Factory Reset and Clearing Cache is necessary and doesn't take much time at all so you may as well do it just to be sure. I also recommend backing up your IMEI if you haven't done it yet.
Click to expand...
Click to collapse
This seems to have done the job. Running PAC 4.3 right now. I've rebooted successfully once so far.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Exactly what I ended up doing after nothing else was working. After getting it hanging the first time, even flashing 4.2 roms was giving me boot issues. After reverting back to stock and reflashing I'm now running the 9/1 Pac nightly and the 8/31 kt747 kernel.
I'm probably 10+ reboots in without issue and I flashed the kernel separately!
bullet2binary said:
This seems to have done the job. Running PAC 4.3 right now. I've rebooted successfully once so far.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
exodus454 said:
Exactly what I ended up doing after nothing else was working. After getting it hanging the first time, even flashing 4.2 roms was giving me boot issues. After reverting back to stock and reflashing I'm now running the 9/1 Pac nightly and the 8/31 kt747 kernel.
I'm probably 10+ reboots in without issue and I flashed the kernel separately!
Click to expand...
Click to collapse
I'm glad to hear that this seems to be the proper fix. That's odd that you were having trouble with 4.2 ROMs, but then again I'd been running 4.2 ROMs on my phone since they first started rolling out. It's kind of annoying that everyone's S3 seems to be slightly different then the next.
Yeah this was a weird one all right. Just glad this post had a solution
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
glad i found this otherwise my first noob post would have truly been a noob move. Thanks wouldn't have guessed that fix for a few days at least.
verified it works. but it did require some weird time dealing with a bootloop issue on stock recoveries. had to find a .tar version of CWM to flash via odin for the final result.
Still Stuck at Splash Screen after trying to upgrade to 4.3
Background:
I had been running task's rom since 4.1.x. Upgraded to 4.2 with not problems and I kept the rom current. Tried to upgrade to 4.3 and that is where the problems started. It appeared to work, saw that Google was updating a number of apps but then then I kept getting error messages regarding various about various processes stopping unexpectedly. Rebooted the phone and it came up with Task's kernel splash screen where it remains frozen.
I can get into TWRP (v2.3.3.1) recovery and into Download mode.
I have tried wiping Cache and Dalvik Cache
I have wiped System
I have done a Factory Reset
I have Formatted Data
I have used Odin twice to get back to stock (I747UCDLK3) and both times it says "passed."
When I try to reboot it, however, it comes back to Task's Kernel splash screen (I do not see the Samsung screen)
Any help or suggestions would be great.
UPDATED: Found an older update from April and was able to restore it. Still wondering why 4.3 wouldn't take.
This Works
I was skeptical, but this actually works! Now running Task's 4.3 on my bell i747m without any problems!
Thanks for the tip OP :good:
spongdangly said:
For those of you who keep getting stuck on the splash screen after trying to restart your phone after installing a 4.3 ROM.
My steps were (and I take no credit for this, I can't remember who had said to do this and I wasn't logged in so I couldn't click the thank you button):
1. Use Odin to flash the latest stock ROM
2. Enter the stock recovery and do a factory reset and clear the cache (I did both twice just to make sure)
3. Use Odin to flash the stock rooted ROM.
4. Enter the stock recovery and do a factory reset and clear the cache. (This might not be necessary but I did anyways just to make sure)
5. Use Odin to flash a custom recovery (TWRP 2.6.0.0 was the newest recovery when I did this last week)
6. Enter the custom recovery and wipe everything, then flash whatever 4.3 based ROM and then flash GApps if you want.
*Note* It seemed like the phone was hanging on the splash screen after either the initial boot or the first restart (I can't remember which, it's been a week) but it did boot and reboot fine.
I hope this helps out some people since I found it to be quite irritating that I could install a 4.3 ROM and set everything up but when I went to restart it would hang at the splash screen (going into the recovery and clearing the cache/dalvik cache wasn't helping).
I hope I posted this in the right section but apologies if it's not.
Click to expand...
Click to collapse
If this works you're a life saver! I've been posting around 4.3 threads about this for weeks and no one came up with a decent answer....
Tried reflashing stock with root but didn't work... i'll try your way, see if that works
Gonna try this tonight!!!
Thanks!
I posted in the CM thread about this, but thought I would pass it along.. I didn't have to go back to stock non-rooted. What I did:
I odin'd Mr. Robinson's LK3 rooted
Factory reset from the 3e recovery
Rebooted
Odin'd twrp
Restored nandroid of CM
Good to go.
Solved
Thanks, also works for i727 skyrocket
wont this brick people phones flashing back 4.1.1 stock ? im on stock 4.3 stuck on samsung galaxy s3 logo meaning flashing back to latest stock rom using odin 4.1.2? 4.3 stock rom or 4.3 custom roms?
Kastro1784 said:
wont this brick people phones flashing back 4.1.1 stock ? im on stock 4.3 stuck on samsung galaxy s3 logo meaning flashing back to latest stock rom using odin 4.1.2? 4.3 stock rom or 4.3 custom roms?
Click to expand...
Click to collapse
spongdangly said:
1. Use Odin to flash the latest stock ROM
Click to expand...
Click to collapse
If you were already on the Stock 4.3 ROM you do not want to flash the 4.0.4, 4.1.1 or 4.1.2 Stock ROM since you will brick your phone.
I'll add a note to the OP about not attempting to downgrade to an older Stock ROM though.
spongdangly said:
If you were already on the Stock 4.3 ROM you do not want to flash the 4.0.4, 4.1.1 or 4.1.2 Stock ROM since you will brick your phone.
I'll add a note to the OP about not attempting to downgrade to an older Stock ROM though.
Click to expand...
Click to collapse
what framware did you flash to get 4.3 back working ? a leaked 4.3 Rom with no root ? thien reflash the stock 4.3 ?
Kastro1784 said:
what framware did you flash to get 4.3 back working ? a leaked 4.3 Rom with no root ? thien reflash the stock 4.3 ?
Click to expand...
Click to collapse
When I had done this back in August, I flashed the Rogers 4.1.2 Stock ROM since that was the latest stock firmware at the time and I have a Canadian S3.
If you had already flashed or been on the Stock AT&T 4.3 ROM, I'd recommend reflashing the latest Stock AT&T 4.3 ROM and following the instructions in the OP. Just make sure that you don't attempt to flash an older version of the Stock ROM that you were already on since you will brick your phone. The Stock ROM contains the bootloader and that cannot be downgraded. I don't have an American S3 since I'm Canadian so I don't know which 4.3 bootloader is the newest although I'm sure a quick search would answer that for you.
spongdangly said:
When I had done this back in August, I flashed the Rogers 4.1.2 Stock ROM since that was the latest stock firmware at the time and I have a Canadian S3.
If you had already flashed or been on the Stock AT&T 4.3 ROM, I'd recommend reflashing the latest Stock AT&T 4.3 ROM and following the instructions in the OP. Just make sure that you don't attempt to flash an older version of the Stock ROM that you were already on since you will brick your phone. The Stock ROM contains the bootloader and that cannot be downgraded. I don't have an American S3 since I'm Canadian so I don't know which 4.3 bootloader is the newest although I'm sure a quick search would answer that for you.
Click to expand...
Click to collapse
There is no latest Stock AT&T 4.3 ROM right now to reflash if you're already on the Stock AT&T 4.3 ROM. We cannot keep telling people this. If so, tell us how, because no one has, as of yet.
I've seen entirely too many posts telling people who are having trouble or phone is soft bricked on the Stock AT&T 4.3 ROM to flash or Odin back to stock. Then when asked how, the discussion ends.
That's also one of the reasons why I refuse to upgrade to 4.3 right now. At least I can still Odin back to stock as an option if something does goes wrong, but who am I to tell anyone to stay away from the latest toy, I mean update?
shortydoggg said:
There is no latest Stock AT&T 4.3 ROM right now to reflash if you're already on the Stock AT&T 4.3 ROM. We cannot keep telling people this. If so, tell us how, because no one has, as of yet.
I've seen entirely too many posts telling people who are having trouble or phone is soft bricked on the Stock AT&T 4.3 ROM to flash or Odin back to stock. Then when asked how, the discussion ends.
That's also one of the reasons why I refuse to upgrade to 4.3 right now. At least I can still Odin back to stock as an option if something does goes wrong, but who am I to tell anyone to stay away from the latest toy, I mean update?
Click to expand...
Click to collapse
I'm sorry that I'm unable to help. As I had mentioned I have a Canadian Rogers phone (since I'm in Canada) so I don't know what's going on with the AT&T Stock 4.3 ROMs other then the fact that lots of people are having problems.
If you never flashed or did an OTA update to 4.3 then I'd suggest flashing the Stock 4.1.2 ROM. That or try what Ozark_8125 did since it saves you a couple steps (just make sure that LK3 isn't an older ROM than the one you were on).
If you're unsure what bootloader is currently on your phone and your phone is rooted I'd highly recommend downloading one of the many Root Check apps from the Play Store to verify which bootloader you're currently on.
*Note* I don't know which bootloader is for the 4.1.2 AT&T ROM nor do I know which bootloader came with the 4.3 ROMs. I'm sure a simple search would answer that for you.
Ozark_8125 said:
I posted in the CM thread about this, but thought I would pass it along.. I didn't have to go back to stock non-rooted. What I did:
I odin'd Mr. Robinson's LK3 rooted
Factory reset from the 3e recovery
Rebooted
Odin'd twrp
Restored nandroid of CM
Good to go.
Click to expand...
Click to collapse
Samsung fixed my phone free thanks for the help
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Hey guys,
I'm trying to go back to a stock Touchwiz ROM from CyanogenMod 10.2. My only problem is, I can't Odin back to a stock from because the only Odin compatible file I have is 4.1.1 which my phone will no longer go to since my baseband was updated after trying a former 4.3 ROM.
Can anyone link me to a 4.3 ROM that I can flash in Odin? I'm asking because most of the ROM's I'm finding that are 4.3 require you to be on a TW ROM before flashing their ROM. Thanks.
n_alvarez2007 said:
Hey guys,
I'm trying to go back to a stock Touchwiz ROM from CyanogenMod 10.2. My only problem is, I can't Odin back to a stock from because the only Odin compatible file I have is 4.1.1 which my phone will no longer go to since my baseband was updated after trying a former 4.3 ROM.
Can anyone link me to a 4.3 ROM that I can flash in Odin? I'm asking because most of the ROM's I'm finding that are 4.3 require you to be on a TW ROM before flashing their ROM. Thanks.
Click to expand...
Click to collapse
Go to http://www.sammobile.com/firmwares/and put in your phone info and download the stock file.
Satstalker said:
Go to http://www.sammobile.com/firmwares/and put in your phone info and download the stock file.
Click to expand...
Click to collapse
This link is useless for me as it does not have a 4.3 stock rom listed in their official firmwares. They have only up to 4.1.2 which I cannot Odin back to since my baseband was already updated.
n_alvarez2007 said:
This link is useless for me as it does not have a 4.3 stock rom listed in their official firmwares. They have only up to 4.1.2 which I cannot Odin back to since my baseband was already updated.
Click to expand...
Click to collapse
Maybe there is no update for your carrier yet! A thanks would be nice for trying to help you. But hey next time i wont even reply
|ROM|Bootloader|Kernel|Modem| AT&T Official 4.3 MJB |24 Nov 2013| There you go all stock. make sure you hit the thanks button for everyone (not my files I just found them)
You cant flash this in odin but can use TWRP or CWM. will get you back all stock. Good luck...
theramsey3 said:
|ROM|Bootloader|Kernel|Modem| AT&T Official 4.3 MJB |24 Nov 2013| There you go all stock. make sure you hit the thanks button for everyone (not my files I just found them)
You cant flash this in odin but can use TWRP or CWM. will get you back all stock. Good luck...
Click to expand...
Click to collapse
Do I have to be on a stock rom to use this? I'm currently on Quantum V3 and I don't have access to a stock rom to revert to since my baseband was updated.
n_alvarez2007 said:
Do I have to be on a stock rom to use this? I'm currently on Quantum V3 and I don't have access to a stock rom to revert to since my baseband was updated.
Click to expand...
Click to collapse
No you don't have to be on the stock rom to use that, but the bootloaders are for 4.3 so if you haven't updated yet this will update you.
You can flash any rom you want to as long as you do not mess with the bootloader you will be OK. I do not know if this work on anything besides an at&t phone using it on anything else is done so at your own risk just the same as using it.
What about the recovery? any way to get a stock recovery image?
Is it possible to come back from a 4.4 rom to say 4.2 or 4.3 stock ROM? Can I ODIN back?
Currently not able to get MMS/Group messaging to work on the current 4.4 rom. Tried updating modem, adjusting settings...still no luck and I need it for work. Appreciate any help
Which phone do you have?
audit13 said:
Which phone do you have?
Click to expand...
Click to collapse
AT&T S3
You can go 4.4 -> 4.3. However, you cant get the unrooted stock rom of 4.3, since Samsung/AT&T didn't ever release to the public (It was all OTA).
If you went 4.2->4.3 OTA, then your bootloader was upgraded. As you've seen on these forums, downgrading from 4.3 to 4.2/4.1 is a big no-no unless you want a brick.
Example:
4.2 ---(OTA UPGRADE)--> 4.3.
Rooted+cyanogen 4.3
cyanogen 4.3-> cyanogen 4.4
cyanogen 4.4-> cyanogen 4.3
cyanogen 4.3
( ^ what I have done)
NOTE: After I got the OTA, I have never tried going back to stock. You can use rooted roms that are CLOSE to stock. But I wouldn't suggest going stock because of knox and blah blah blah.
Were you ever on stock AT&T 4.3? If you were, your bootlaoder was probably updated so you can't install an older bootloader. You can load a older AT&T ROM using mobile Odin which does not flash a bootloader or modem.
I never went to 4.3...straight from 4.2 to 4.4
audit13 said:
Were you ever on stock AT&T 4.3? If you were, your bootlaoder was probably updated so you can't install an older bootloader. You can load a older AT&T ROM using mobile Odin which does not flash a bootloader or modem.
Click to expand...
Click to collapse
So I could go back to a 4.2 TW rom if I was never on 4.3 OTA? (or any 4.3 for that matter)
blackwrx02 said:
So I could go back to a 4.2 TW rom if I was never on 4.3 OTA? (or any 4.3 for that matter)
Click to expand...
Click to collapse
Yes, you just need to find a stock AT&T ROM that is flashable in Odin.
I'm currently running beanstalk 4.4.1 rooted with twrp installed. I did the 4.3 OTA update before I went with the custom roms.
what is my options as far as going back to stock 4.3? I've read several threads but non of them were the exact scenario that im in. Any help is appreciated.
Are you running an AT&T phone? If you are, you cannot flash any rom that tries to flash a bootloader that is older than 4.3. If you do, it will brick the phone.
audit13 said:
Are you running an AT&T phone? If you are, you cannot flash any rom that tries to flash a bootloader that is older than 4.3. If you do, it will brick the phone.
Click to expand...
Click to collapse
yes it is at&t. Also I do have my original backup but twrp doesn't recognize it
Why not load a 4.3-based ROM? If you want to go back to stock, you could try using mobile Odin to load a stock ROM.
so i have a rooted at&T galaxy s3 on the latest stock firmware which i guess is 4.3. i tried flashing resurrection rom which was kit kat and it failed. so i restored my back up and the phone would get stuck on the splash screen. so i formated the whole phone and forgot to save my backup to my sdcard. twrp now says that i have no OS installed and also says i am not rooted anymore. im scared and need a little assistance. i just want to get it going.
Just flash the latest TWRP, copy a custom ROM to your phone, boot into TWRP, and flash it.
audit13 said:
Just flash the latest TWRP, copy a custom ROM to your phone, boot into TWRP, and flash it.
Click to expand...
Click to collapse
i bought a micro sc card reader and transfered a superuser zip and an old 4.3 beanstalk rom. it flashed fine last night. i used my phone all day and downloaded the latest 4.3 beanstalk rom and just tried to flash it and it FAILED. This is the second time i had a flash fail. I tried flashing that old beanstalk rom again and it failed too! what the heck???? my battery is a little low.....does twrp have some kind of safety built in where it wont flash if bettery is low?
ok...so i flashed cwm because im more familiar it than twrp. then i flashed an old slimbean 4.3 rom i had. everything worked fine and the phone booted up perfectly. i dont want slim bean so i rebooted into cwm and tried to flash the newest 4.3 beanstalk rom and it failed.....why?
scorey03 said:
ok...so i flashed cwm because im more familiar it than twrp. then i flashed an old slimbean 4.3 rom i had. everything worked fine and the phone booted up perfectly. i dont want slim bean so i rebooted into cwm and tried to flash the newest 4.3 beanstalk rom and it failed.....why?
Click to expand...
Click to collapse
Did you install the latest CWM? Is the 4.3 Beanstalk based on Kit Kat?
audit13 said:
Did you install the latest CWM? Is the 4.3 Beanstalk based on Kit Kat?
Click to expand...
Click to collapse
no its not based on kitkat. i flashed an older version of cwm via odin. i figured i could just update it with rom manager. i tried to update cwm to the latest verion and it fails everytime. so...i downloaded root checker from the play store and it says im not rooted. i need to fix this lol
im running a custom rom but yet root checker says its not rooted...hmm
Flash the latest Philz and. Validus as I know that is a rooted ROM. Personally, I don't use ROM manager.
scorey03 said:
im running a custom rom but yet root checker says its not rooted...hmm
Click to expand...
Click to collapse
What custom Rom is this?
Sent from my HTC One using Tapatalk
I'm on slimbean 4.3 and I've lost root. I want root back so I can get rid of this ROM. Ive flashed supersu multiple times with cwm..but I still do not have root access.
So I guess my question now is.....how do I get back to stock rooted? Im on slimbean 4.3 without root access.
scorey03 said:
I'm on slimbean 4.3 and I've lost root. I want root back so I can get rid of this ROM. Ive flashed supersu multiple times with cwm..but I still do not have root access.
Click to expand...
Click to collapse
Rooting is not needed to flash another ROM. Just boot into recovery, wipe, and flash another ROM.
audit13 said:
Rooting is not needed to flash another ROM. Just boot into recovery, wipe, and flash another ROM.
Click to expand...
Click to collapse
I tried and it failed......
scorey03 said:
I tried and it failed......
Click to expand...
Click to collapse
What rom and which recovery did you try?
I suggest you Odin to stock and try all this again
Sent from my ATT Samsung Galaxy SIII using TapaTalk
crazymonkey05 said:
I suggest you Odin to stock and try all this again
Sent from my ATT Samsung Galaxy SIII using TapaTalk
Click to expand...
Click to collapse
I agree 100%. Can you tell me where I can get stock 4.3 firmware?
Here is a repository with a lot of stock firmwares http://forum.xda-developers.com/showthread.php?t=1968625
Sent from my ATT Samsung Galaxy SIII using TapaTalk
scorey03 said:
I agree 100%. Can you tell me where I can get stock 4.3 firmware?
Click to expand...
Click to collapse
There is no stock ATT 4.3 ROM because ATT only released 4.3 as an OTA update. Do not flash any 4.3 firmware (even from sammmobile.com) unless it has been compiled for installation via Odin. Check the development threads for firmware that can be flashed via Odin.
crazymonkey05 said:
Here is a repository with a lot of stock firmwares http://forum.xda-developers.com/showthread.php?t=1968625
Sent from my ATT Samsung Galaxy SIII using TapaTalk
Click to expand...
Click to collapse
ok. im going to flash I747UCUEMJ2.7z which came from that link/thread you posted via odin.
If you got the phone on 4.3 you need to flash mjb or else you will brick the device
Sent from my ATT Samsung Galaxy SIII using TapaTalk