Finally got Superuser installed and TWRP recovery working - Ran the Knox script. What ROMS will work with the new 4.3 OTA MJB besides slimrom?
I understand that if I update the ROM it shouldn't include a bootloader that is why I am asking this question???
Also since I have been using the stock 4.3 my battery is draining like a sieve. Anyone else having this issue?
Thanks,
Any rom designed for the d2att should work as long as the ROM is compatible with the bootloader.
Ok would any of the 4.3 or higher roms work?
neojim913 said:
Ok would any of the 4.3 or higher roms work?
Click to expand...
Click to collapse
Yes. The 4.4.2 ROMs I tried work with the 4.1.2 bootloader too.
but i have the 4.3 bootloader.
neojim913 said:
but i have the 4.3 bootloader.
Click to expand...
Click to collapse
Look at the updater script of the ROM to see which bootloaders are supported.
where is that located. Also have you tried the quantum 4.4.2 rom?
neojim913 said:
where is that located. Also have you tried the quantum 4.4.2 rom?
Click to expand...
Click to collapse
I haven't tried that ROM but I have tried Cyanfox and Validus, both of which are based on 4.4.2. I think all ROMs will work with your phone's 4.3 bootloader.
The updater script is located \Meta-INF\com\Google\android\
Ok. I have the same concern. Rooted 4.3 att stock rom. I wonder if cyanogen rom 4.3 or 4.4 would work?
IISaintII said:
Ok. I have the same concern. Rooted 4.3 att stock rom. I wonder if cyanogen rom 4.3 or 4.4 would work?
Click to expand...
Click to collapse
You should install a custom recovery first, then install a custom ROM.
Another question: Does the modem affect the rom in any way? I am on MJB from the last OTA update. I am just a little nervous because now that I am on 4.3 I cant use ODIN to flash the old stock rom anymore. All I have is a Nan backup of the current stock rom from ATT.
Yes. I installed cmw touch when I rooted. BTW I flashed CM11-M3. Working fine. But my GPS is screwed since I went back to stock 4.1.2 via Odin.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I thought you could not go back to 4.1.2?
neojim913 said:
I thought you could not go back to 4.1.2?
Click to expand...
Click to collapse
You can install an older ROM by using mobile Odin since mobile Odin does not flash a bootloader or modem.
mobile odin is 5 bucks. is there another alternative? I saw mobile odin lite but I was not sure what kernel to use? I have twrp recovery installed. is this a good recovery to use?
Quantum & Quantum Kernal
Quantum and quantum kernal are what I've been using since the first day I rooted me phone.
I recommend using them if your looking for a fast energy saving 4.4.2 KitKat rom.
I also used Odin on my PC to do my initial root/bootload/ROM etc. I'm sure you can Google and find an installer. Its what I did.
By the way Quantum is Spectacular!!!!
---------- Post added at 03:00 PM ---------- Previous post was at 02:45 PM ----------
Install ClockworkMod 6.0.4.7 before any custom ROM!!!
It allows you to backup your current setup and recover to you working setup if needed on bad flash.
I also recmend the ROM Manager app from the play store it helps a lot.
Killadro said:
Quantum and quantum kernal are what I've been using since the first day I rooted me phone.
I recommend using them if your looking for a fast energy saving 4.4.2 KitKat rom.
I also used Odin on my PC to do my initial root/bootload/ROM etc. I'm sure you can Google and find an installer. Its what I did.
By the way Quantum is Spectacular!!!!
---------- Post added at 03:00 PM ---------- Previous post was at 02:45 PM ----------
Install ClockworkMod 6.0.4.7 before any custom ROM!!!
It allows you to backup your current setup and recover to you working setup if needed on bad flash.
Also are you using the 4.3 OTA MJB update?
I also recmend the ROM Manager app from the play store it helps a lot.
Click to expand...
Click to collapse
Have you looked at PhilZ Touch 6 Recovery CWM Advanced Edition 6.x. This looks like it is replacing the current CWM. http://forum.xda-developers.com/showthread.php?t=2201860. Do you have any thoughts on this?
What version of ODin are you using? I have never tried this method except for restore my phone back to factory image. Which now looks like we can no longer do?
As for Quantum I was unable to locate a link where to download this ROM from on the XDA site. There is only a link to the changelog not to the rom itself. http://forum.xda-developers.com/showthread.php?t=2390147
Also thanks for responding to me. I just want to make sure I know what I am doing before I do it. I really dont want a brick.
I went to stock 4.1.1 before i went to 4.3.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
neojim913 said:
I thought you could not go back to 4.1.2?
Click to expand...
Click to collapse
The MJB bootloader in the official OTA 4.3 will prevent you from using an older bootloader. Odin .tar files of stock ROMs prior to 4.3 include bootloaders, installing them will brick your phone. The MJ2 bootloader from the leaked version of the 4.3 update will allow you to go back to 4.1.1 or 4.1.2. I have seen one mention of one of the devs using a difficult way to revert to older stock even after having the official 4.3 bootloader.
There is not a Odin .tar for the OTA 4.3 but enewman17 has provided a method to return to it from a custom ROM. AT&T I747 UCUEMJB Stock Restore
neojim913 said:
Have you looked at PhilZ Touch 6 Recovery CWM Advanced Edition 6.x. This looks like it is replacing the current CWM. http://forum.xda-developers.com/showthread.php?t=2201860. Do you have any thoughts on this?
What version of ODin are you using? I have never tried this method except for restore my phone back to factory image. Which now looks like we can no longer do?
As for Quantum I was unable to locate a link where to download this ROM from on the XDA site. There is only a link to the changelog not to the rom itself. http://forum.xda-developers.com/showthread.php?t=2390147
Also thanks for responding to me. I just want to make sure I know what I am doing before I do it. I really dont want a brick.
Click to expand...
Click to collapse
Latest Quantum is v3.5 and link is http://d-h.st/users/TommyTarts/?fld_id=33215#files Blue color name on first page of Quantum thread is actually link
Related
Hey guys,
I'm trying to go back to a stock Touchwiz ROM from CyanogenMod 10.2. My only problem is, I can't Odin back to a stock from because the only Odin compatible file I have is 4.1.1 which my phone will no longer go to since my baseband was updated after trying a former 4.3 ROM.
Can anyone link me to a 4.3 ROM that I can flash in Odin? I'm asking because most of the ROM's I'm finding that are 4.3 require you to be on a TW ROM before flashing their ROM. Thanks.
n_alvarez2007 said:
Hey guys,
I'm trying to go back to a stock Touchwiz ROM from CyanogenMod 10.2. My only problem is, I can't Odin back to a stock from because the only Odin compatible file I have is 4.1.1 which my phone will no longer go to since my baseband was updated after trying a former 4.3 ROM.
Can anyone link me to a 4.3 ROM that I can flash in Odin? I'm asking because most of the ROM's I'm finding that are 4.3 require you to be on a TW ROM before flashing their ROM. Thanks.
Click to expand...
Click to collapse
Go to http://www.sammobile.com/firmwares/and put in your phone info and download the stock file.
Satstalker said:
Go to http://www.sammobile.com/firmwares/and put in your phone info and download the stock file.
Click to expand...
Click to collapse
This link is useless for me as it does not have a 4.3 stock rom listed in their official firmwares. They have only up to 4.1.2 which I cannot Odin back to since my baseband was already updated.
n_alvarez2007 said:
This link is useless for me as it does not have a 4.3 stock rom listed in their official firmwares. They have only up to 4.1.2 which I cannot Odin back to since my baseband was already updated.
Click to expand...
Click to collapse
Maybe there is no update for your carrier yet! A thanks would be nice for trying to help you. But hey next time i wont even reply
|ROM|Bootloader|Kernel|Modem| AT&T Official 4.3 MJB |24 Nov 2013| There you go all stock. make sure you hit the thanks button for everyone (not my files I just found them)
You cant flash this in odin but can use TWRP or CWM. will get you back all stock. Good luck...
theramsey3 said:
|ROM|Bootloader|Kernel|Modem| AT&T Official 4.3 MJB |24 Nov 2013| There you go all stock. make sure you hit the thanks button for everyone (not my files I just found them)
You cant flash this in odin but can use TWRP or CWM. will get you back all stock. Good luck...
Click to expand...
Click to collapse
Do I have to be on a stock rom to use this? I'm currently on Quantum V3 and I don't have access to a stock rom to revert to since my baseband was updated.
n_alvarez2007 said:
Do I have to be on a stock rom to use this? I'm currently on Quantum V3 and I don't have access to a stock rom to revert to since my baseband was updated.
Click to expand...
Click to collapse
No you don't have to be on the stock rom to use that, but the bootloaders are for 4.3 so if you haven't updated yet this will update you.
You can flash any rom you want to as long as you do not mess with the bootloader you will be OK. I do not know if this work on anything besides an at&t phone using it on anything else is done so at your own risk just the same as using it.
What about the recovery? any way to get a stock recovery image?
Could some one answer a few questions I have on how to go from rooted 4.1.1 to latest build. I have read and DL'd the zip from the "[LEAK] AT&T 4.3 UCUEMJ2 (Root & Knox versions)" thread and was wondering if the the rom can be loaded directly from CM recovery. Is the new bootloader required or optional?
Thanks
Zb
Model
SGH-I747
Android Version
4.1.1
Baseband
I747UCDLK3
Build
JR003L.I747UCDLK3
Recovery
CM 6
ZKornecki said:
Could some one answer a few questions I have on how to go from rooted 4.1.1 to latest build. I have read and DL'd the zip from the "[LEAK] AT&T 4.3 UCUEMJ2 (Root & Knox versions)" thread and was wondering if the the rom can be loaded directly from CM recovery. Is the new bootloader required or optional?
Thanks
Zb
Model
SGH-I747
Android Version
4.1.1
Baseband
I747UCDLK3
Build
JR003L.I747UCDLK3
Recovery
CM 6
Click to expand...
Click to collapse
Have you checked to see if you can get OTA update or update via the latest version of Kies? I was able to update from 4.1.1 to 4.3 with 2 different pre-rooted i747s - one officially via OTA and the other by flashing the same zips you refer to via cm recovery so maybe that answers your question. Before taking the one-way trip to 4.3, however, be sure you are done messing with your phone at the older firmware including unlocking, if required, as you may not be able to go back.
Larry2999 said:
Have you checked to see if you can get OTA update or update via the latest version of Kies? I was able to update from 4.1.1 to 4.3 with 2 different pre-rooted i747s - one officially via OTA and the other by flashing the same zips you refer to via cm recovery so maybe that answers your question. Before taking the one-way trip to 4.3, however, be sure you are done messing with your phone at the older firmware including unlocking, if required, as you may not be able to go back.
Click to expand...
Click to collapse
I wasn't able to update via Kies. If I use CM recovery is there a specific order I need to install with and can I install the new bootloader with CM Recovery or do I need to use odin?
ZKornecki said:
I wasn't able to update via Kies. If I use CM recovery is there a specific order I need to install with and can I install the new bootloader with CM Recovery or do I need to use odin?
Click to expand...
Click to collapse
I'm not aware there is any Odin flashable file for 4.3 yet. You may follow the steps in the link below for manual update via CM...
http://www.smartphonejam.com/2013/1...fficial-android43-i747ucuemjb-ota-update.html
You didn't say if you tried the OTA update? If you want to remain on stock, this is always the safest bet. If you are currently on official 4.1.1 you should be able to get this via WiFi with a valid AT&T sim card in your phone.
Me personally would avoid the official OTA update unless you're absolutely sure you want to keep it. Once you take the bootloader MJB you cannot flash any stock rom anymore unless you have an I747M then you can only flash the official 4.3.
I am on the MJ2 leak bootloader and have no issues, running S3Rx with the MJB modem phone runs great, if something happens I can simply flash anything I want to with Odin.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
theramsey3 said:
Me personally would avoid the official OTA update unless you're absolutely sure you want to keep it. Once you take the bootloader MJB you cannot flash any stock rom anymore unless you have an I747M then you can only flash the official 4.3.
I am on the MJ2 leak bootloader and have no issues, running S3Rx with the MJB modem phone runs great, if something happens I can simply flash anything I want to with Odin.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Exactly. I have also stayed away from the official 4.3. I have no idea why so many people around here just insist that their phone be on the latest update. Ok, the ones that had some major issues previously I could see, and yes you're going to have your exceptions whose phones will work just fine on 4.3. But all this 4.3 has done is create even more issues, with no flash-able firmware to go back to when something goes wrong. Some say there is no major reason not to update, but I say that there is no major reason to update, as most never give a reason to why they want to update. I just don't get it, other than these updates have become like new toys, just something new to play with.
shortydoggg said:
Exactly. I have also stayed away from the official 4.3. I have no idea why so many people around here just insist that their phone be on the latest update. Ok, the ones that had some major issues previously I could see, and yes you're going to have your exceptions whose phones will work just fine on 4.3. But all this 4.3 has done is create even more issues, with no flash-able firmware to go back to when something goes wrong. Some say there is no major reason not to update, but I say that there is no major reason to update, as most never give a reason to why they want to update. I just don't get it, other than these updates have become like new toys, just something new to play with.
Click to expand...
Click to collapse
shortydoggg thanks for your post and you actually hit the nail on the head. I can't think of reason I NEED to update, I just get bored and like to play. My warranty is up so voiding that isn't an issue and my 4.1.1 runs just fine, but by playing I learn so I like to play. 4.3 has a few nice features but if prevents the phone from being re-flashed then the risks most-likely aren't worth the benefits. I am just doing my due diligence, researching and asking questions. I really appreciate all the input and advice I get from forums such as this so I can make an intelligent decision.
ZKornecki said:
shortydoggg thanks for your post and you actually hit the nail on the head. I can't think of reason I NEED to update, I just get bored and like to play. My warranty is up so voiding that isn't an issue and my 4.1.1 runs just fine, but by playing I learn so I like to play. 4.3 has a few nice features but if prevents the phone from being re-flashed then the risks most-likely aren't worth the benefits. I am just doing my due diligence, researching and asking questions. I really appreciate all the input and advice I get from forums such as this so I can make an intelligent decision.
Click to expand...
Click to collapse
If you really want to try and want it to be reversible you can use the 4.3 leaked MJ2 bootloader if you decide you don't like the 4.3 stuff you can simply Odin back to stock. But if you use the MJB bootloader you cannot.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
theramsey3 said:
Me personally would avoid the official OTA update unless you're absolutely sure you want to keep it. Once you take the bootloader MJB you cannot flash any stock rom anymore unless you have an I747M then you can only flash the official 4.3.
I am on the MJ2 leak bootloader and have no issues, running S3Rx with the MJB modem phone runs great, if something happens I can simply flash anything I want to with Odin.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I was running the same set up with MJ2 OS on MJB modem and the system was running fine until I recently flashed TWRP and SU to root and now the phone keeps booting to TWRP. I've run reset and reboot to system several times and even reflashed the system and modem files to attempt a reset but the same thing keeps happening - booting to TWRP. Will appreciate all steers on how I can rectify this.
Thanks
Larry2999 said:
I was running the same set up with MJ2 OS on MJB modem and the system was running fine until I recently flashed TWRP and SU to root and now the phone keeps booting to TWRP. I've run reset and reboot to system several times and even reflashed the system and modem files to attempt a reset but the same thing keeps happening - booting to TWRP. Will appreciate all steers on how I can rectify this.
Thanks
Click to expand...
Click to collapse
You're on the MJ2 leak bootloader you can use Odin to flash a stock image on the phone if you can get it into download/Odin mode.
Sent from my SAMSUNG-SGH-I747 running S3Rx MJ2 bootloader MJB modem and it is smooth
---------- Post added at 09:31 PM ---------- Previous post was at 09:29 PM ----------
If it won't let you into download mode then format the internal SD card which should erase everything for the most part and flash everything fresh.
Sent from my SAMSUNG-SGH-I747 running S3Rx MJ2 bootloader MJB modem and it is smooth
theramsey3 said:
You're on the MJ2 leak bootloader you can use Odin to flash a stock image on the phone if you can get it into download/Odin mode.
Sent from my SAMSUNG-SGH-I747 running S3Rx MJ2 bootloader MJB modem and it is smooth
---------- Post added at 09:31 PM ---------- Previous post was at 09:29 PM ----------
If it won't let you into download mode then format the internal SD card which should erase everything for the most part and flash everything fresh.
Sent from my SAMSUNG-SGH-I747 running S3Rx MJ2 bootloader MJB modem and it is smooth
Click to expand...
Click to collapse
Thanks. It does get into download mode. Is there an Odin flashable file for the MJ2 and, if so, where can I find this? I'm wary about flashing an older ROM (e.g. 4.1.1) to avoid any further conflicts as I still have the official MJB modem or can this be done safely?
I've tried clearing the system and reflashing but it was the same result or perhaps I wasn't doing this the right way?
Larry2999 said:
Thanks. It does get into download mode. Is there an Odin flashable file for the MJ2 and, if so, where can I find this? I'm wary about flashing an older ROM (e.g. 4.1.1) to avoid any further conflicts as I still have the official MJB modem or can this be done safely?
I've tried clearing the system and reflashing but it was the same result or perhaps I wasn't doing this the right way?
Click to expand...
Click to collapse
I have been told by very reliable sources that you can Odin to an older version safely regardless of modem as long as the bootloader isn't MJB or MK5 so I am pretty confident it is safe. At this point there isn't too much to loose.
Sent from my SAMSUNG-SGH-I747 running S3Rx MJ2 bootloader MJB modem and it is smooth
---------- Post added at 11:47 PM ---------- Previous post was at 11:42 PM ----------
While you're there I would flash 4.1.1 and do the free unlock. If my laptop charger wasn't broken I would test it for you I would love to unlock my phone.
Sent from my SAMSUNG-SGH-I747 running S3Rx MJ2 bootloader MJB modem and it is smooth
theramsey3 said:
I have been told by very reliable sources that you can Odin to an older version safely regardless of modem as long as the bootloader isn't MJB or MK5 so I am pretty confident it is safe. At this point there isn't too much to loose.
Sent from my SAMSUNG-SGH-I747 running S3Rx MJ2 bootloader MJB modem and it is smooth
---------- Post added at 11:47 PM ---------- Previous post was at 11:42 PM ----------
While you're there I would flash 4.1.1 and do the free unlock. If my laptop charger wasn't broken I would test it for you I would love to unlock my phone.
Sent from my SAMSUNG-SGH-I747 running S3Rx MJ2 bootloader MJB modem and it is smooth
Click to expand...
Click to collapse
Thanks. Just tried Odining to 4.1.1 but it failed, however. Would you recommend wiping the system in TWRP and booting to download to try again?
Larry2999 said:
Thanks. Just tried Odining to 4.1.1 but it failed, however. Would you recommend wiping the system in TWRP and booting to download to try again?
Click to expand...
Click to collapse
Odining to an older ROM is apparently not an option as this is isn't working. Thankfully, the phone is still booting into both download and recovery modes without difficulty so there is hope. I flashed CWM recovery via Odin thinking the problem may perhaps be with TWRP. However, the result was the same and the phone kept booting back into recovery mode rather than to the system. I also tried to see if was the bootloader so I flashed the MJB bootloader as well as reflashed the MJ2 system zip. The flashings were successful so, at least, it's unlikely to be a bootloader conflict but still the system will not boot.
Will greatly appreciate steers from the community on how to get the thing back working. n Thanks
Larry2999 said:
Odining to an older ROM is apparently not an option as this is isn't working. Thankfully, the phone is still booting into both download and recovery modes without difficulty so there is hope. I flashed CWM recovery via Odin thinking the problem may perhaps be with TWRP. However, the result was the same and the phone kept booting back into recovery mode rather than to the system. I also tried to see if was the bootloader so I flashed the MJB bootloader as well as reflashed the MJ2 system zip. The flashings were successful so, at least, it's unlikely to be a bootloader conflict but still the system will not boot.
Will greatly appreciate steers from the community on how to get the thing back working. n Thanks
Click to expand...
Click to collapse
Finally got it back up and running today. Cant be sure what really led to the soft brick but I simply wiped out everything in TWRP mode and then re-flashed the (MJ2) system, modem and kernel zips. This time it worked, I'd tried the same thing before but without the kernel. Now I'm back to the same configuration as before.
I attempted to flash a 4.4.2 rom yesterday but it couldnt and it gave me a status 7 error. I looked it up and people said that you have to update clockworkmod. Well i tried to through terminal but it couldn't. It said something like could not find directory. So if anyone has any idea what I can do pleast tell me.
Using Galaxy s3 sgh-i747 on PA 3.99.1 ROM
Flash Philz Touch from here via Odin (use the tar version in PDA): http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
alright i did it through odin and it worked..now im gonna make a backup again and try flashing a rom. hope it works. thanks for the help
If you can't flash a KK ROM, you may need to update your bootloader. If you're not on a 4.3 bootloader, try and avoid it for now.
audit13 said:
If you can't flash a KK ROM, you may need to update your bootloader. If you're not on a 4.3 bootloader, try and avoid it for now.
Click to expand...
Click to collapse
im on a 4.3 rom but if i get error status 7 again ill just restore my backup and avoid it...is there a 4.3 bootloader? Also i was about to wipe it but its asking me wipe data/factory reset or clean to install a new ROM. I suggest its the 2nd one but if i do it and it doesnt work can i still restore my backup?
orlans21 said:
im on a 4.3 rom but if i get error status 7 again ill just restore my backup and avoid it...is there a 4.3 bootloader? Also i was about to wipe it but its asking me wipe data/factory reset or clean to install a new ROM. I suggest its the 2nd one but if i do it and it doesnt work can i still restore my backup?
Click to expand...
Click to collapse
There is a 4.3 bootloader that would be installed if you ran an OTA update to 4.3 or you manually installed the 4.3 bootloader.
Did you make your backup using Philz? If not, make the backup using Philz, then wipe and install.
audit13 said:
There is a 4.3 bootloader that would be installed if you ran an OTA update to 4.3 or you manually installed the 4.3 bootloader.
Did you make your backup using Philz? If not, make the backup using Philz, then wipe and install.
Click to expand...
Click to collapse
I just made a backup on Philz and im not sure if i installed a 4.3 bootloader manually or OTA. Just to be clear im wiping to install ROM. so the 2nd option
orlans21 said:
I just made a backup on Philz and im not sure if i installed a 4.3 bootloader manually or OTA
Click to expand...
Click to collapse
Doesn't really matter but it's good to know that you need to stay away from any attempts to downgrade the bootloader.
hahah why would i want to downgrade?
orlans21 said:
hahah why would i want to downgrade?
Click to expand...
Click to collapse
I have seen posts where people bricked their phone when trying to return to a stock ROM using Odin.
well...im gonna have to put it back to a stock rom when i get a new phone and give this to my dad...i still have the 4.1 stock downloaded on my computer...i dont even remember how to put it back now lol. so i should try flashing a 4.4.2 rom? which rom do you prefer? i have carbon and liquidsmooth. i want halo like i do on PA and both have it i believe
orlans21 said:
well...im gonna have to put it back to a stock rom when i get a new phone and give this to my dad...i still have the 4.1 stock downloaded on my computer...i dont even remember how to put it back now lol
Click to expand...
Click to collapse
You can't restore to a completely stock ROM not that you have a 4.3 bootloader. AT&T never released a full 4.3 stock ROM, only an update to 4.3 from an earlier stock ROM.
If you did not have a 4.3 bootloader, you could install any stock AT&T ROM such as 4.1.1. Being able to restore to stock 4.1.1 would also allow you to sim unlock your phone for free, if necessary.
audit13 said:
You can't restore to a completely stock ROM not that you have a 4.3 bootloader. AT&T never released a full 4.3 stock ROM, only an update to 4.3 from an earlier stock ROM.
Click to expand...
Click to collapse
well im on rogers and its the same as att. i still have the original samsung touchwiz 4.1 rom just incase anything happens.
Your original post said you have an sgh-i747 which is an AT&T model. If you have a Rogers s3, it's an sgh-i747m.
Regardless of which model you have, you can't downgrade from any 4.3 bootloader which means you can't completely revert back to 4.1.1. The best you could do would be to run 4.1.1 on a 4.3 bootloader.
audit13 said:
Your original post said you have an sgh-i747 which is an AT&T model. If you have a Rogers s3, it's an sgh-i747m.
Regardless of which model you have, you can't downgrade from any 4.3 bootloader which means you can't completely revert back to 4.1.1. The best you could do would be to run 4.1.1 on a 4.3 bootloader.
Click to expand...
Click to collapse
sorry i should have included the m lol. i wont worry about going back to 4.1 until the galaxy s5 comes out and im ready to give it to my dad. but back to focusing on this. im about to attempt to flash a 4.4.2 rom. either liquidsmooth or carbon. what do you like?
I prefer Validus version 4.3 because it includes Nova Launcher and it has a dark UI theme.
but thats 4.3. i wanna be on 4.4 and im installing nova and making it the way i had it before.
wait a second is it a 4.4 rom?
orlans21 said:
but thats 4.3. i wanna be on 4.4 and im installing nova and making it the way i had it before.
wait a second is it a 4.4 rom?
Click to expand...
Click to collapse
It is a 4.4.2-based rom. The release is version 4.3.
hmm interesting...you do recommend it? what great features does it come with?
I like it because it's a very stripped-down ROM, has a dark UI, and is AOSP-based.
It's not radically different from other ROMs but has exactly what I want. I run the same ROM on a Nexus 4 and Motorola Atrix HD.
I haven't tried a new ROM in forever because I was satisfied with what I'd been using. Lately, though, my 4.1.2 ROM (SpeedBean All-Star) has gotten very slow and is starting to drain the battery faster than it used to. If I decide to try out a newer ROM (4.3 or 4.4), is there anything special I need to do apart from the usual wiping of everything?
trpnblies7 said:
I haven't tried a new ROM in forever because I was satisfied with what I'd been using. Lately, though, my 4.1.2 ROM (SpeedBean All-Star) has gotten very slow and is starting to drain the battery faster than it used to. If I decide to try out a newer ROM (4.3 or 4.4), is there anything special I need to do apart from the usual wiping of everything?
Click to expand...
Click to collapse
If you're running a custom 4.1.2 rom you should only have to update to a newer 4.3+ compatiable recovery, such as TWRP 2.7.0.0 or CWM 6.0.3.7+, if you don't update the recovery it will most likely end up with boot looping after flashing a 4.3+ rom or possible file system corruption which ends up usually needing to go back to full stock rom to fix.
Almite said:
If you're running a custom 4.1.2 rom you should only have to update to a newer 4.3+ compatiable recovery, such as TWRP 2.7.0.0 or CWM 6.0.3.7+, if you don't update the recovery it will most likely end up with boot looping after flashing a 4.3+ rom or possible file system corruption which ends up usually needing to go back to full stock rom to fix.
Click to expand...
Click to collapse
Thanks! I do already have the newest TWRP, so that shouldn't be an issue.
I found Slim 4.3.1 is the most stable with low battery and memory consumption if you want to try. Looks like 4.4 Kitkat but without bugs and shut downs.
Good luck!
---------- Post added at 03:00 PM ---------- Previous post was at 02:39 PM ----------
trpnblies7 said:
Thanks! I do already have the newest TWRP, so that shouldn't be an issue.
Click to expand...
Click to collapse
TWRP 2.7 lets a new ROMs to overwrite system setting in root directory (preload?) and prevents them from changing back to default. Restore from backup won't help. I've had a few problems with KitKat Roms after they changed a system sound settings to "LOW". Has used ODIN to reflush back to stock.
A new build of Beanstalk KitKat by "soundofmath" works very well on my Hercules. Can't find any bugs. The only problem is battery life but this is a common problem with all KitKats.I went with "conservative" and "row" kernel setting and it helps a little.
hello
Almite said:
If you're running a custom 4.1.2 rom you should only have to update to a newer 4.3+ compatiable recovery, such as TWRP 2.7.0.0 or CWM 6.0.3.7+, if you don't update the recovery it will most likely end up with boot looping after flashing a 4.3+ rom or possible file system corruption which ends up usually needing to go back to full stock rom to fix.
Click to expand...
Click to collapse
hi if i have an android version 4.1.2 and CWM with kernel version 3.0.31 what can i do if a want to update CWM ?
yamilexcolon said:
hi if i have an android version 4.1.2 and CWM with kernel version 3.0.31 what can i do if a want to update CWM ?
Click to expand...
Click to collapse
Sounds like you are on stock rom, if so you would want to follow one of these guides here or here on getting rooted - you need a custom recovery to be able to install any custom rom, figure out what rom you plan on installing and check it's thread for what recovery version is needed.
Almite said:
Sounds like you are on stock rom, if so you would want to follow one of these guides here or here on getting rooted - you need a custom recovery to be able to install any custom rom, figure out what rom you plan on installing and check it's thread for what recovery version is needed.
Click to expand...
Click to collapse
but the android version has something to do with this
---------- Post added at 07:35 PM ---------- Previous post was at 07:31 PM ----------
yamilexcolon said:
but the android version has something to do with this
Click to expand...
Click to collapse
the real problem i have is that i have already rooted i installed a rom called tweakwiz but since then my phone vibrates for no reason im trying to figure out what to do with this problem i have try to install another rom but the installation always abort and maybe i thought is because i have an old version of CWM idk but if you have a answer about this problem im having please let me know thank you
yamilexcolon said:
the real problem i have is that i have already rooted i installed a rom called tweakwiz but since then my phone vibrates for no reason im trying to figure out what to do with this problem i have try to install another rom but the installation always abort and maybe i thought is because i have an old version of CWM idk but if you have a answer about this problem im having please let me know thank you
Click to expand...
Click to collapse
What rom (link to it) are you installing?, also it cant hurt to update your recovery if using CWM to the lastest, but if you want to use TWRP then with a 4.1.2 rom use TWRP 2.5.0.0 or 2.6.0.0, or if a 4.3+ based rom use TWRP 2.7.0.0
so i have a rooted at&T galaxy s3 on the latest stock firmware which i guess is 4.3. i tried flashing resurrection rom which was kit kat and it failed. so i restored my back up and the phone would get stuck on the splash screen. so i formated the whole phone and forgot to save my backup to my sdcard. twrp now says that i have no OS installed and also says i am not rooted anymore. im scared and need a little assistance. i just want to get it going.
Just flash the latest TWRP, copy a custom ROM to your phone, boot into TWRP, and flash it.
audit13 said:
Just flash the latest TWRP, copy a custom ROM to your phone, boot into TWRP, and flash it.
Click to expand...
Click to collapse
i bought a micro sc card reader and transfered a superuser zip and an old 4.3 beanstalk rom. it flashed fine last night. i used my phone all day and downloaded the latest 4.3 beanstalk rom and just tried to flash it and it FAILED. This is the second time i had a flash fail. I tried flashing that old beanstalk rom again and it failed too! what the heck???? my battery is a little low.....does twrp have some kind of safety built in where it wont flash if bettery is low?
ok...so i flashed cwm because im more familiar it than twrp. then i flashed an old slimbean 4.3 rom i had. everything worked fine and the phone booted up perfectly. i dont want slim bean so i rebooted into cwm and tried to flash the newest 4.3 beanstalk rom and it failed.....why?
scorey03 said:
ok...so i flashed cwm because im more familiar it than twrp. then i flashed an old slimbean 4.3 rom i had. everything worked fine and the phone booted up perfectly. i dont want slim bean so i rebooted into cwm and tried to flash the newest 4.3 beanstalk rom and it failed.....why?
Click to expand...
Click to collapse
Did you install the latest CWM? Is the 4.3 Beanstalk based on Kit Kat?
audit13 said:
Did you install the latest CWM? Is the 4.3 Beanstalk based on Kit Kat?
Click to expand...
Click to collapse
no its not based on kitkat. i flashed an older version of cwm via odin. i figured i could just update it with rom manager. i tried to update cwm to the latest verion and it fails everytime. so...i downloaded root checker from the play store and it says im not rooted. i need to fix this lol
im running a custom rom but yet root checker says its not rooted...hmm
Flash the latest Philz and. Validus as I know that is a rooted ROM. Personally, I don't use ROM manager.
scorey03 said:
im running a custom rom but yet root checker says its not rooted...hmm
Click to expand...
Click to collapse
What custom Rom is this?
Sent from my HTC One using Tapatalk
I'm on slimbean 4.3 and I've lost root. I want root back so I can get rid of this ROM. Ive flashed supersu multiple times with cwm..but I still do not have root access.
So I guess my question now is.....how do I get back to stock rooted? Im on slimbean 4.3 without root access.
scorey03 said:
I'm on slimbean 4.3 and I've lost root. I want root back so I can get rid of this ROM. Ive flashed supersu multiple times with cwm..but I still do not have root access.
Click to expand...
Click to collapse
Rooting is not needed to flash another ROM. Just boot into recovery, wipe, and flash another ROM.
audit13 said:
Rooting is not needed to flash another ROM. Just boot into recovery, wipe, and flash another ROM.
Click to expand...
Click to collapse
I tried and it failed......
scorey03 said:
I tried and it failed......
Click to expand...
Click to collapse
What rom and which recovery did you try?
I suggest you Odin to stock and try all this again
Sent from my ATT Samsung Galaxy SIII using TapaTalk
crazymonkey05 said:
I suggest you Odin to stock and try all this again
Sent from my ATT Samsung Galaxy SIII using TapaTalk
Click to expand...
Click to collapse
I agree 100%. Can you tell me where I can get stock 4.3 firmware?
Here is a repository with a lot of stock firmwares http://forum.xda-developers.com/showthread.php?t=1968625
Sent from my ATT Samsung Galaxy SIII using TapaTalk
scorey03 said:
I agree 100%. Can you tell me where I can get stock 4.3 firmware?
Click to expand...
Click to collapse
There is no stock ATT 4.3 ROM because ATT only released 4.3 as an OTA update. Do not flash any 4.3 firmware (even from sammmobile.com) unless it has been compiled for installation via Odin. Check the development threads for firmware that can be flashed via Odin.
crazymonkey05 said:
Here is a repository with a lot of stock firmwares http://forum.xda-developers.com/showthread.php?t=1968625
Sent from my ATT Samsung Galaxy SIII using TapaTalk
Click to expand...
Click to collapse
ok. im going to flash I747UCUEMJ2.7z which came from that link/thread you posted via odin.
If you got the phone on 4.3 you need to flash mjb or else you will brick the device
Sent from my ATT Samsung Galaxy SIII using TapaTalk