Develop Bugs

How to install Clock Work Mod on a100 with unlocked boot loader !

DISCLAIMER
Thank you to all the DEV'S who have made this possible BIG UPS TO YOU
This worked for me, and in theory if my instructions are followed carefully it will work for you.
However if your results are not the same I am in no way responsible for any dammage done to your tablet!
THE GOOD STUFF
This was tested on Acer A100 on the latest ICS LEAK found here http://forum.xda-developers.com/showthread.php?t=1510706
Also my PC is running windows 7 x64
(Follow install instructions carefully)
First install the latest ICS leak http://vache-android.com/v1/index.ph...files&file=148
Once complete do a factory data reset on your device from the settings/backup and restore menu on the tablet
When that is complete, Root your Device using the method found here http://forum.xda-developers.com/showthread.php?t=1531646
( again Follow instructions Carefully )
BE ABSOLUTELY SURE YOUR DEVICE IS ROOTED BEFORE YOU GO ANY FURTHER!!
Unlock your BOOTLOADER using the method here http://forum.xda-developers.com/showthread.php?t=1557445
(Really be careful here!)
This is where it gets tricky download http://forum.tegraowners.com/viewtopic.php?f=7&t=369 for your OS and extract recovery_thor17_403.img to the root of your platform-tools folder for instance mine is C:\android-sdk\platform-tools
Once completed on your PC open a command prompt as an administrator and navigate to your platform-tools folder from cmd prompt e.g. cd c:\android-sdk\platform-tools and hit enter
next type the following commands:
adb reboot bootloader
once in bootloader mode type:
fastboot flash recovery recovery_thor17_403.img
and hit enter you will see it flash to your device within a couple of seconds.
once complete with the tablet in upright landscape mode ( home button on the right hand side ) power the device down and power it back on while holding the leftmost volume button firmly when it vibrates you may release the power button.
continue to hold the volume button until you see Booting recovery kernel image on the screen.
if all went well you now have cwm on your device
now for rom manager!
boot back into android OS and navigate to the google market, search for rom manager in the upper search pane.
download the app and install
open the app and press ok
next press flask clockworkmod recovery
next confirm your phone model
a popup will say your device is not officially supported press yes
next confirm version 3.x+
and you should be good to go
Sent from my A100 using xda premium

masterpker2 said:
First check out this post http://www.acertabletforum.com/foru...rkmod-recovery-your-acer-iconia-tab-a200.html
Download the updated file from the above website, extract it to your desktop, and run acera200simpletool.bat and follow the onscreen instructions.
Once complete download the rom manager app from the market and install it.
Once installed open from manager and choose flash clockwork mod recovery from the top of the list, then confirm your device is Acer a100. It will say there is currently no recovery for your device and ask if you installed a custom one, choose yes and select the second option it should say 3.x.x or something to that effect. Again confirm your selection and tada you now have cwm and a working from manager. I have tested this and made a complete backup already. Cheers
Sent from my A100 using xda premium
Click to expand...
Click to collapse
hello masterpcker...Did you install anything else first? Were you just using the standard a100 root? Also, did you unlock your bootloader beforehand? thanks so much friend

Yes I unlocked my boot loader first, and my device was rooted so all I did was run the .bat file from the above website and choose option 3 install recovery only. I am about to try a modded a500 from and see what it does.
Sent from my A100 using xda premium

masterpker2 said:
Yes I unlocked my boot loader first, and my device was rooted so all I did was run the .bat file from the above website and choose option 3 install recovery only. I am about to try a modded a500 from and see what it does.
Sent from my A100 using xda premium
Click to expand...
Click to collapse
I will be eager to hear how that comes out! I wish you the best of luck, but I'm not real confident. let us know the outcome if you don't mind....good luck!

For some reason I followed the directions to install CWM and it doesn't work.
When I try to boot to recovery all I see is the android mascot on it's back with a warning sign. If I press the home button it brings up the Android System Recovery, which I believe is the stock recovery. I'm not even sure how to select the items. I can only highlight the menu items using the volume keys.
It doesn't look like the cwm that I have flashed on my atrix.
Any ideas?
Edit...
Btw, I did unlock my bootloader

Well the a500 modded rom was a bust, it just booted to a really colorful screen lol. But my Android backup worked great for reinstall
Sent from my A100 using xda premium

Myster1ous what os are you running and what method for root did you use?
Sent from my A100 using xda premium

masterpker2 said:
Myster1ous what os are you running and what method for root did you use?
Sent from my A100 using xda premium
Click to expand...
Click to collapse
Running Windows 7, I did the root method from here
http://forum.xda-developers.com/showthread.php?t=1531646

Did you try running the script as administrator?
Sent from my A100 using xda premium

masterpker2 said:
Did you try running the script as administrator?
Sent from my A100 using xda premium
Click to expand...
Click to collapse
I did, nothing still. I'm going to have to look at the batch file and manually input in the commands. Maybe that will do a difference

myster1ous said:
I did, nothing still. I'm going to have to look at the batch file and manually input in the commands. Maybe that will do a difference
Click to expand...
Click to collapse
Did you ever get it to work properly? I am having the same problem now.
@masterpker2...are you running linux? i am running windows 7 here and i am getting a [cant install recovery.img] from the a200 batch.....did you have any problems with this to begin with? thanks

I had to dd it to the correct partition and then I was able to get in, but I don't recommend doing it that way!

shadowofzeus said:
I had to dd it to the correct partition and then I was able to get in, but I don't recommend doing it that way!
Click to expand...
Click to collapse
did you have the same problem as we are having? is everything working correctly with you now? thanks

Followed instructions... works perfectly on Win 7 x64... thanks man!! Nandroid in Progress ...

A101
And for the A101, this method will not work?

oneovakindoldys2 said:
Did you ever get it to work properly? I am having the same problem now.
@masterpker2...are you running linux? i am running windows 7 here and i am getting a [cant install recovery.img] from the a200 batch.....did you have any problems with this to begin with? thanks
Click to expand...
Click to collapse
Nope, never got it working.
shadowofzeus said:
I had to dd it to the correct partition and then I was able to get in, but I don't recommend doing it that way!
Click to expand...
Click to collapse
What's the syntax did you use to dd to the device?
I found this dd syntax in the other thread. That the same one you used?
Code:
su
dd if=/mnt/external_sd/recovery.img of=/dev/block/mmcblk0p1

-Extract the zip folder "recoverycwma100" ( It's a recovery into Acer a200 simple tool )
-Copy ''recovery.img'' into your external sd card
-open a terminal emulator to your A100 ( root acces !!! )
- Write the following commands :
su
dd if = / mnt / external_sd / recovery.img of = / dev/block/mmcblk0p1
-wait a message '' xxxx bytes transferred in... ''
-exit terminal
-open root explorer with a mount system
-rename the file '' install-recovery.sh'' into /etc/ it '' install-recovery.bak''
Reboot into recovery with volum down + power , and Enjoy

leclasheur22 said:
-Extract the zip folder "recoverycwma100" ( It's a recovery into Acer a200 simple tool )
-Copy ''recovery.img'' into your external sd card
-open a terminal emulator to your A100 ( root acces !!! )
- Write the following commands :
su
dd if = / mnt / external_sd / recovery.img of = / dev/block/mmcblk0p1
-wait a message '' xxxx bytes transferred in... ''
-exit
Reboot into recovery with volum down + power , and Enjoy
Click to expand...
Click to collapse
Can't we just go into fastboot and use fastboot flash recovery recovery.img?

If you're running linux or just want to use adb it's way more simple than it looks.
Code:
Adb reboot-bootloader
fastboot flash recovery recovery.img
fastboot reboot
And if you brick your device by accidently installing the wrong boot.img
find your respected rom .zip file that you are currently using and use this.
Code:
Adb reboot-bootloader
fastboot flash boot boot.img
fastboot reboot

blmvxer said:
If you're running linux or just want to use adb it's way more simple than it looks.
Code:
Adb reboot-bootloader
fastboot flash recovery recovery.img
fastboot reboot
And if you brick your device by accidently installing the wrong boot.img
find your respected rom .zip file that you are currently using and use this.
Code:
Adb reboot-bootloader
fastboot flash boot boot.img
fastboot reboot
Click to expand...
Click to collapse
I can confirm that I have already flashed the recovery.img via fastboot, however cwm still fails on my particular tab. I did a full factory reset and flashed the entire new ics through recovery with the exact same results. I will be investigating the cause of some tabs doing this later tonight when I get home from work. If someone figures this out please post. I have gotten the recovery.img to flash via the a200cwm, however android exclamation upon recovery attempt. i have tried all three paths with no success. I am almost certain that it is a problem with the rooting method, but i won't have time to have a look until tonight. thanks and goodluck! I think the problem could be because of installing different rooting methods in the past, however I have yet to find a way to solve it.

[Q] huawei ascend p6 multiloader

I think i have bricked my p6 after flashing boot(b125).img from fastboot and its stuck and restarting at bootscreen. Pls someone help with heawei multiloader as am told it can fix bricked phone from usb. File now no more assessible from huawei website. pls help.

Hey do you have twrp recovery installed? Have you already tried to get into your stock recovery ?( Holding volume up/down button simultanesly during boot)

nourudeen said:
I think i have bricked my p6 after flashing boot(b125).img from fastboot and its stuck and restarting at bootscreen. Pls someone help with heawei multiloader as am told it can fix bricked phone from usb. File now no more assessible from huawei website. pls help.
Click to expand...
Click to collapse
WisdomSeeker said:
Hey do you have twrp recovery installed? Have you already tried to get into your stock recovery ?( Holding volume up/down button simultanesly during boot)
Click to expand...
Click to collapse
my phone never came with any stock recovery. had 'factory mode' not recovery when holding those bottons. In factory mode, no option for flashing anything. Now phone only restarts on bootscreen and then on-off. initially tried flashing TWRP just befor bricking phone but adb gave error like this 'partition not support flash and i had already flash a boot.img for b125

b608 version of my phone was a brick was b118 installed, there is a solution?
sorry my poor english, I'm from Turkey, please help, please..

Both of you should try to flash the stock recovery! You can download it here www).androidfilehost.(com)/?fid=23252070760973625 (just remove the brackets) .
Then follow these steps:
1. Put your device in fastboot mode ( > adb reboot bootloader )
2. Flash recovery via fastboot ( fastboot flash recovery recovery.img )
3. Reboot via fastboot ( fastboot reboot )
Afterwards try to reboot to your stock recovery . Then you can simply install over the update.app a fresh Huawei Firmware
Greetings Wisdomseeker

WisdomSeeker said:
Both of you should try to flash the stock recovery! You can download it here www).androidfilehost.(com)/?fid=23252070760973625 (just remove the brackets) .
Then follow these steps:
1. Put your device in fastboot mode ( > adb reboot bootloader )
2. Flash recovery via fastboot ( fastboot flash recovery recovery.img )
3. Reboot via fastboot ( fastboot reboot )
Afterwards try to reboot to your stock recovery . Then you can simply install over the update.app a fresh Huawei Firmware
Greetings Wisdomseeker
Click to expand...
Click to collapse
well wisdom, like i said, its restarting at boot screen so i cant get to fastboot. i sometimes able to enter an android (3e) recovery and try installing what u said but each time, installation is stopped. Got a certain miui rom and halfway it says NOT VALID OTA PACKAGE. SCATTER FILE MISSING. All other package rom or other recovery refuse to install and say ERROR. i have tried this your files but not possible.

nourudeen said:
well wisdom, like i said, its restarting at boot screen so i cant get to fastboot. i sometimes able to enter an android (3e) recovery and try installing what u said but each time, installation is stopped. Got a certain miui rom and halfway it says NOT VALID OTA PACKAGE. SCATTER FILE MISSING. All other package rom or other recovery refuse to install and say ERROR. i have tried this your files but not possible.
Click to expand...
Click to collapse
Maybe you should try To use another SD card Or mabye Format the current one and then add the update.APP To it
PHP:

WisdomSeeker said:
Maybe you should try To use another SD card Or mabye Format the current one and then add the update.APP To it
PHP:
Click to expand...
Click to collapse
No luck! I think the huawei multiloader will do the work. Any Idea where i can download?

nourudeen said:
No luck! I think the huawei multiloader will do the work. Any Idea where i can download?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2618253

I dont understand... When i start multiloader.exe it seems to go.. But i can only download update.app file with che left One button.the center button let me either download the ROM and the right button keep the tool off. What i have to do for use this magic program?

[NOOB FRIENDLY] [ROOT] How to Unlock bootloader, Install CWM and Root Yureka

Note - This will wipe all your data and Format Internal memory ! So keep a backup !
Steps :
Step 1. Download the file ADB and extract it to a folder on your desktop. Switch off your Micromax Yureka Android smartphone.
Step 2. Now connect your to the PC with USB cable and the LED near the speaker at the top goes red.
Step 3. As soon as the LED glows keep the vol up button pressed. You will see the fastboot screen.
Step 4. ON computer, open the downloaded folder 'ADB' and hold Shift button and right click on the empty
space of the folder and select “Open Command prompt window here”.
Step 5. Now in the command prompt window type the following command.
fastboot -i 0x1ebf oem unlock
This may delete all your data including the internal memory. Your bootloader is now unlocked.
Step 6. Now the next step is to install the CWM recovery. Download the CWM recovery and save/copy it on your ADB folder. Again hold Shift button and right click on the empty space of the folder and select “Open Command prompt window here”.
Step 7. Now type this on your command window:-
fastboot -i 0x1ebf flash recovery recovery-yu.img
You have successfully Install cwm recovery now ! Just press Volume up + Volume down + Power button to access CWM mode !
Step 8. Download the Superuser.zip file from here and move the file on your phone SD card.
Step 9. Once the SuperSu zip file is moved on your phone. Switch off you phone and boot in CWM recovery mode. TO do this press volume up + volume down + power button .
Step 10. Now your phone will boot on Recovery mode, for the main screen of the recover main menu Select Install zip from Sd card and Select Superuser.zip file that you copied on your phone Sd card.
Step 11. Once the files is installed, Reboot your Device.
Now your have to rooted Micromax YU Yureka.
Enjoy !
Download Link:
ADB : https://drive.google.com/folderview?id=0B05Crz57q4zgaTA4U0xtUFpmYlk&usp=sharing
CWM Recovery : https://drive.google.com/file/d/0B05Crz57q4zgd1FCdlk5NnMzV1U/view?usp=sharing
SuperSu : https://drive.google.com/file/d/0B05Crz57q4zgOHllSndBUTdYeHc/view?usp=sharing
Hit thanks, if helped

can you share the link of TWRP Recovery also...!!!
Triggered from my Nexus 10

Tried not working
Sent from my YUREKA using XDA Free mobile app

amitroutray said:
can you share the link of TWRP Recovery also...!!!
Triggered from my Nexus 10
Click to expand...
Click to collapse
TWRP recovery is now official for yu yureka. You can get flash it easily using 'TWRP Manager' app, which is available in play store.
Download Link of App : https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager
Install the app and choose your device and flash !
Hit thanks, if Helped

pbvayadande said:
Tried not working
Sent from my YUREKA using XDA Free mobile app
Click to expand...
Click to collapse
You must be doing something wrong. Double check it !
Hit thanks, if helped !

I did today morning worked. Installed cwm recovery and also rooted.
Thanks.
Sent from my YUREKA using XDA Free mobile app

pbvayadande said:
Tried not working
Sent from my YUREKA using XDA Free mobile app
Click to expand...
Click to collapse
Always check the MD5 before doing anything.
Triggered from YU

waiting for device error coming
waiting for device error coming

mfu007 said:
waiting for device error coming
Click to expand...
Click to collapse
Enable USB Debugging before connecting to your pc and give permissions (if asked, it will be displayed on your mobile screen) !
Hit thanks, if helped

prince.d.emperor said:
Enable USB Debugging before connecting to your pc and give permissions (if asked, it will be displayed on your mobile screen) !
Hit thanks, if helped
Click to expand...
Click to collapse
usb debugging enabled then also waiting for device is coming.i am using win 8 64bit.please help me

mfu007 said:
usb debugging enabled then also waiting for device is coming.i am using win 8 64bit.please help me
Click to expand...
Click to collapse
Device is not being recognised by your pc. Open command prompt in that folder and type 'adb devices' and press enter. You will get the name of your device (if recognised). If you don't get any name, then your Yureka is not being recognised and you need to install adb drivers for yureka.
You can try this one. Link : http://www.koushikdutta.com/post/universal-adb-driver
Hit thanks, if helped

I did by running bat file....
While in fastboot method I had error waiting for device
Sent from my YUREKA using XDA Free mobile app

pbvayadande said:
I did by running bat file....
While in fastboot method I had error waiting for device
Sent from my YUREKA using XDA Free mobile app
Click to expand...
Click to collapse
how.. can you explain

The instructions are incomplete so there will be no rooting unless you install proper micromax drivers for adb . Looks like the instructions were emailed and posted by someone else. Disabling driver signature enforcement is also not helpful .Tried it on 4 different systems and a fresh vm with x86,x64 win7 & win8 . drivers from koushik also does not work

abs0lut3z33r0 said:
The instructions are incomplete so there will be no rooting unless you install proper micromax drivers for adb . Looks like the instructions were emailed and posted by someone else. Disabling driver signature enforcement is also not helpful .Tried it on 4 different systems and a fresh vm with x86,x64 win7 & win8 . drivers from koushik also does not work
Click to expand...
Click to collapse
Can you please provide me the link of drivers which will help?

How I did by running bat
Links given below
http://www.informationlord.com/unlock-bootloader-micromax-yu/
http://www.informationlord.com/install-cwm-micromax-yu/
Try this simple way
Sent from my YUREKA using XDA Free mobile app

Universal naked driver along with minimal adb and fastboot worked .

Can anyone explained how I remain in Stock recovery when rooting...??
thanks in advance
Triggered from my Nexus 10

amitroutray said:
Can anyone explained how I remain in Stock recovery when rooting...??
thanks in advance
Triggered from my Nexus 10
Click to expand...
Click to collapse
This will help you out!!! http://forum.xda-developers.com/yureka/general/20-2-2015-root-flashing-custom-recovery-t3035281

amitroutray said:
Can anyone explained how I remain in Stock recovery when rooting...??
thanks in advance
Triggered from my Nexus 10
Click to expand...
Click to collapse
Get the stock recovery backed up from /dev/block/platform/xyz.. Then flash cwm, root, then flash stock recovery
-------------------------------------------
HIT Thanks if you like my post
-------------------------------------------
My work:
[TOOL]Kernel/Boot.img (un)packer
[ZIP]Flashable zip to bypass lockscreen for LG E975
[TOOL]ANDROID's COMPLETE TOOLBOX
Baseband Fix fir LG F180X converted to International E975

[stock q&a][miui7] ask anything niob friendly[2016]

Hello,
Hey all if u have newly rooted your xiaomi redmi 1s or want to root it and u have any questions about the roms or stock miui queries post here
Thanks.

HELP!! Cannot root my Redmi 1S
I have tried multiple times to root my Redmi 1S and have failed. I keep getting, "Install update.zip failed". The screens shows 99% and then the error message pops up. I ame on Miui Covery 2.0.1 and Miui 7.2.1.0. I am trying to install TWRP on the phone and switch over to CM11 or CM12. Any ideas on how I can resolve this error and root my phone?

I installed cm13 and SD card as adapted storage .How to flash a new ROM using twrp because it's not showing SD card.

dxsyrz said:
I installed cm13 and SD card as adapted storage .How to flash a new ROM using twrp because it's not showing SD card.
Click to expand...
Click to collapse
There won't be any sdcard bro!! You have formatted the sd card as adaptive storage i.e., your sdcard is now a part of android system. So twrp will not show your sdcard anymore.

Suggestions needed guys!!
Want to root latest stock global rom
Sent from my HM 1S using Tapatalk

sonjamin said:
I have tried multiple times to root my Redmi 1S and have failed. I keep getting, "Install update.zip failed". The screens shows 99% and then the error message pops up. I ame on Miui Covery 2.0.1 and Miui 7.2.1.0. I am trying to install TWRP on the phone and switch over to CM11 or CM12. Any ideas on how I can resolve this error and root my phone?
Click to expand...
Click to collapse
Bro leave that stock method its just not happening try to flash recovery through fastboot mode u will need a pc but its safe and works 100% follow the steps carefully
1)Download latest TWRP Recovery from official site and keep it on ur desktop
2)Download Minimal ADB and Fastboot if u havent and install it in ur pc in the C: drive
3)Place the downloaded twrp 3....img to the folder u just installed ADB Fastboot
4)Rename the twrp 3.0....img to recovery.img
5)Boot phone to fastboot mode by swithing off the mob and the pressing vol down + powet button simultaneously the phone wld boot to fastboot and u wld see a dead boy Fastboot writtn below him
4)Connect Phone to PC and make sure u have installed the drivers of 1S
6)Opem Adb fastboot by going to the dir u installed it and opening MAF.exe
Type the following commands one by one
1) fastboot devices
If ur device is listed u may proceed or else check for correct drivers
2) fastboot flash recovery recovery.img
It wld start flashing and it wld be done in just 2 secs
3) after this all is done open phone back and remove battery remove usb cable and the again insert battery and press vol up+ power button simultaneously and the phone wld boot to twrp the it wld ask allow modifications then swipe it to completely wipe stock rec out.
You're Done
Hit Thanks if Helped
Sent from my CP8298_I00 using XDA-Developers mobile app

manudduke said:
Suggestions needed guys!!
Want to root latest stock global rom
Sent from my HM 1S using Tapatalk
Click to expand...
Click to collapse
See my post dude
Sent from my CP8298_I00 using XDA-Developers mobile app

Msf107252 said:
Bro leave that stock method its just not happening try to flash recovery through fastboot mode u will need a pc but its safe and works 100% follow the steps carefully
1)Download latest TWRP Recovery from official site and keep it on ur desktop
2)Download Minimal ADB and Fastboot if u havent and install it in ur pc in the C: drive
3)Place the downloaded twrp 3....img to the folder u just installed ADB Fastboot
4)Rename the twrp 3.0....img to recovery.img
5)Boot phone to fastboot mode by swithing off the mob and the pressing vol down + powet button simultaneously the phone wld boot to fastboot and u wld see a dead boy Fastboot writtn below him
4)Connect Phone to PC and make sure u have installed the drivers of 1S
6)Opem Adb fastboot by going to the dir u installed it and opening MAF.exe
Type the following commands one by one
1) fastboot devices
If ur device is listed u may proceed or else check for correct drivers
2) fastboot flash recovery recovery.img
It wld start flashing and it wld be done in just 2 secs
3) after this all is done open phone back and remove battery remove usb cable and the again insert battery and press vol up+ power button simultaneously and the phone wld boot to twrp the it wld ask allow modifications then swipe it to completely wipe stock rec out.
You're Done
Hit Thanks if Helped
Sent from my CP8298_I00 using XDA-Developers mobile app
Click to expand...
Click to collapse
manudduke said:
Suggestions needed guys!!
Want to root latest stock global rom
Sent from my HM 1S using Tapatalk
Click to expand...
Click to collapse
See my quote bro
Sent from my CP8298_I00 using XDA-Developers mobile app

Help with rooting H815 on latest V20G

Sorry if this has been already posted, I personally can't seem to find help though.
Got a notification on my H815 for a new software update (v20G). I was previously on v20D, with an unlocked bootloader , root and twrp installed. Security patch was from January , so I decided to update via LG Bridge ( with twrp installed I could not update normally).
I managed to update but in the process I lost both my custom recovery and root. I reinstalled TWRP but I have no idea what I should do to reinstall root without losing the update. Does anyone know what I could do?
Thanks for helping!

I am in the same boat actually . I want to root v20g eur but i am in the air right now . Any help would be great

cyrus_0ne said:
I am in the same boat actually . I want to root v20g eur but i am in the air right now . Any help would be great
Click to expand...
Click to collapse
Managed to root! It was actually very simple, I just had to flash the latest SuperSu zip using Twrp. Here it is: http://forum.xda-developers.com/showthread.php?t=1538053

V20g
Hello how root v20g-eur-xx?

Fredo2 said:
Hello how root v20g-eur-xx?
Click to expand...
Click to collapse
Unlock boot loader, install TWRP recovery and flash superSU.zip

StefanG73 said:
Unlock boot loader, install TWRP recovery and flash superSU.zip
Click to expand...
Click to collapse
bootloader unlocked, how easy instal twrp?

Fredo2 said:
bootloader unlocked, how easy instal twrp?
Click to expand...
Click to collapse
Download twrp 3.0.2.0 and save it in the same directory as your adb files then open a command window and type -
adb devices ( press enter )
adb reboot bootloader ( press enter )
( You should now be in fastboot mode )
Rename twrp3.0.2.0 to just twrp and then do this command -
fastboot flash recovery twrp.img

so I install twrp
Sorry for my bad English.
Install on PC ADB package
Download TWRP 3
Download UPDATE-SuperSU-v2.76-20160630161323.zip
Copy twrp3.img and supersu on lg g4
Copy twrp3.img in pc adb foleder
LG G4 drivers must be installed.
Starting CMD Admin. Browse to ADB folder and paste comмands:
adb reboot bootloader - this reboot phone in download mode
fastboot boot twrp3.img - TWRP started but did not install.
When you started twrp, choose Install / Install Image and choose twrp3.img.
After installed twrp, install UPDATE-SuperSU-v2.76-20160630161323.zip
Reboot phone.
that is all

Xceeder said:
Download twrp 3.0.2.0 and save it in the same directory as your adb files then open a command window and type -
adb devices ( press enter )
adb reboot bootloader ( press enter )
( You should now be in fastboot mode )
Rename twrp3.0.2.0 to just twrp and then do this command -
fastboot flash recovery twrp.img
Click to expand...
Click to collapse
already installed thanks
---------- Post added at 11:44 AM ---------- Previous post was at 11:41 AM ----------
StefanG73 said:
Sorry for my bad English.
Install on PC ADB package
Download TWRP 3
Download UPDATE-SuperSU-v2.76-20160630161323.zip
Copy twrp3.img and supersu on lg g4
Copy twrp3.img in pc adb foleder
LG G4 drivers must be installed.
Starting CMD Admin. Browse to ADB folder and paste comмands:
adb reboot bootloader - this reboot phone in download mode
fastboot boot twrp3.img - TWRP started but did not install.
When you started twrp, choose Install / Install Image and choose twrp3.img.
After installed twrp, install UPDATE-SuperSU-v2.76-20160630161323.zip
Reboot phone.
that is all
Click to expand...
Click to collapse
thanks, you from Romania?

No. From Bulgaria
Sent from my LG-H815 using Tapatalk

StefanG73 said:
No. From Bulgaria
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
ok