Related
Please power.
I'm clueless and I'm starting to lose in that amount of instructions on how to KitKat .
I need 100 % how to flash KitKat , where they will work GAPPS + ROOT + TWRP .
I would be very grateful for the clear instructions with links to everything needed .
I think it would help many users B125
Thanks:good:
Gahhhhhhhhhhh!
DEVELOPMENT SECTION. MEANT FOR DEVELOPMENT?!
This is a Question, so it goes in Q&A?
Extract update.app from ZIP, put update.app in dload folder and press power+volume up/down until it starts updattig.
ZuperStyler said:
Extract update.app from ZIP, put update.app in dload folder and press power+volume up/down until it starts updattig.
Click to expand...
Click to collapse
Thanks to that , I really learned a lot, it would deceive .
To me it is also the root + TWRP + gapps
ROOT : http://forum.xda-developers.com/showthread.php?t=2390491
KitKat : http://huaweinews.com/2014/01/android-4-4-beta-ascend-p6/
TWRP Recovery for KitKat : http://forum.xda-developers.com/showthread.php?t=2632542
ZuperStyler said:
ROOT : http://forum.xda-developers.com/showthread.php?t=2390491
KitKat : http://huaweinews.com/2014/01/android-4-4-beta-ascend-p6/
TWRP Recovery for KitKat : http://forum.xda-developers.com/showthread.php?t=2632542
Click to expand...
Click to collapse
And which of those four instructions to root, for kitkat which is functional ?
Try them all, start with the first one.
ZuperStyler said:
Try them all, start with the first one.
Click to expand...
Click to collapse
I am now on the B125 with TWRP , it probably will not go to flash version dload it?
Please where is the link to the gapps ?
Eroot does not work, it has been said here already .
Sorry but your advice is about as much as if you try it yourself
Download the KitKat update.app and place it in the dload folder (I'd advice you to place the dload folder on your internal SD).
Optional: Factory reset (this fixed reboot issue for me)
Then do a local update.
After that, download the kitkat twrp on your pc and extract the .img
Plug in your phone, and enable usb debugging
Get ADB, then shift + rightclick the folder and select open command prompt here.
Type:
adb reboot bootloader
fastboot flash recovery recovery_twrp.img
fastboot reboot
After that, reboot your phone in recoverymode and flash gapps. At reboot, it will ask you if you want to root. Do that.
Done!
Hope I helped.
Sent from my P6-U00 using xda app-developers app
lootjelo said:
Download the KitKat update.app and place it in the dload folder (I'd advice you to place the dload folder on your internal SD).
Optional: Factory reset (this fixed reboot issue for me)
Then do a local update.
After that, download the kitkat twrp on your pc and extract the .img
Plug in your phone, and enable usb debugging
Get ADB, then shift + rightclick the folder and select open command prompt here.
Type:
adb reboot bootloader
fastboot flash recovery recovery_twrp.img
fastboot reboot
After that, reboot your phone in recoverymode and flash gapps. At reboot, it will ask you if you want to root. Do that.
Done!
Hope I helped.
Sent from my P6-U00 using xda app-developers app
Click to expand...
Click to collapse
But a cant boot into adb if i have twrp
Edit: have it, missed drivers-hisuite helps
jkmaxfli said:
But a cant boot into adb if i have twrp
Edit: have it, missed drivers-hisuite helps
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=9H3p5DJrW7o heres a video of some russian doing everything, I hope you figure out what he does, unless you speak russian.
jkmaxfli said:
But a cant boot into adb if i have twrp
Edit: have it, missed drivers-hisuite helps
Click to expand...
Click to collapse
So it worked?
Sent from my P6-U00 using xda app-developers app
Hi There, I Tried To Install The TWRP Recovery Using Recovery Tools - Flasher, It Succeeded, And Asked To Reboot My Phone, Now My Huawei Ascend P6 Is Not Booting, Its Stuck On The "Huawei Ascend" Screen, I Cant Access Recory Or Booot My Phone. Can You Help Me Please?
You should have followed the tutorials to flash TWRP on here... Does adb recognize your phone?
Sent from my P6-U06 using XDA Premium 4 mobile app
lootjelo said:
You should have followed the tutorials to flash TWRP on here... Does adb recognize your phone?
Sent from my P6-U06 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I Tried And It Didnt Work, Kept On Getting Stuck On Waiting For Device, And No, adb Cant See My Phone
If you can't boot into any mode, your best bet would be bringing it to service and playing dumb about as to why your phone is bricked...
Sent from my P6-U06 using XDA Premium 4 mobile app
lootjelo said:
If you can't boot into any mode, your best bet would be bringing it to service and playing dumb about as to why your phone is bricked...
Sent from my P6-U06 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Isnt There Anything Else I Can Try Before Taking It To Service? I Live Too Far From The Nearest Store I Can take It To, It Would Cost a Lot For Me To Take It There.
mcselowa said:
Isnt There Anything Else I Can Try Before Taking It To Service? I Live Too Far From The Nearest Store I Can take It To, It Would Cost a Lot For Me To Take It There.
Click to expand...
Click to collapse
I really wouldn't know: you can't boot into recovery and adb doesn't recognise it... Did you install the drivers for your phone on your pc? Try installing HiSuite... Then check if adb recognises your phone.
Sent from my amazing Ascend P6
lootjelo said:
I really wouldn't know: you can't boot into recovery and adb doesn't recognise it... Did you install the drivers for your phone on your pc? Try installing HiSuite... Then check if adb recognises your phone.
Sent from my amazing Ascend P6
Click to expand...
Click to collapse
I Have HiSuite, But Before My Phone Got Bricked, HiSuite Could See It, But adb Couldnt, Now Both Cant See It
mcselowa said:
I Have HiSuite, But Before My Phone Got Bricked, HiSuite Could See It, But adb Couldnt, Now Both Cant See It
Click to expand...
Click to collapse
Sorry man: then I wouldn't know what to do anymore...
Sent from my amazing Ascend P6.
Powered by MIUI v5.
mcselowa said:
I Have HiSuite, But Before My Phone Got Bricked, HiSuite Could See It, But adb Couldnt, Now Both Cant See It
Click to expand...
Click to collapse
Have you tried using the 3 buttons combo to flash stock firmware?
Download any UPDATE.APP put inside your sdcard inside a folder named dload so it should look like:
sdcard/dload/UPDATE.APP
Then just keep pressing Power+Volume UP+Volume Down buttons at the same time. this will force your phone to to into recovery (either TWRP or Stock). If this does not work try the following.
While Pressing both Power+Volume Down buttons connect your phone to the PC, it will look like the phone is again "stucked" in Huawei Ascend Logo, then usging a cmd inside the fastboot and adb folder type
fastboot devices
If you get any reply from cmd just flash twrp recovery again (manually this time)
How can he try update.app solution if he has custom recovery, he does not have a stock recovery, so your solution is pointless.
dekosteka said:
How can he try update.app solution if he has custom recovery, he does not have a stock recovery, so your solution is pointless.
Click to expand...
Click to collapse
Pointless?
Have actually read what I wrote? He said, the program he used told him it succeed and now his phone is stuck. So it migth have worked or not, meaning that TWRP might or not be succesfully installed in his phone. And I also wrote that if that doesn't work (Meaning he can't boot to recovery by the combo) he can try to reboot the phone to fastboot and flash again either TWRP or Stock Recovery back to the phone...
So your reply was the pointless one here, not mine...
jimbo77 said:
Have you tried using the 3 buttons combo to flash stock firmware?
Download any UPDATE.APP put inside your sdcard inside a folder named dload so it should look like:
sdcard/dload/UPDATE.APP
Then just keep pressing Power+Volume UP+Volume Down buttons at the same time. this will force your phone to to into recovery (either TWRP or Stock). If this does not work try the following.
While Pressing both Power+Volume Down buttons connect your phone to the PC, it will look like the phone is again "stucked" in Huawei Ascend Logo, then usging a cmd inside the fastboot and adb folder type
fastboot devices
If you get any reply from cmd just flash twrp recovery again (manually this time)
Click to expand...
Click to collapse
I Tried The 2nd Option And The Phone Appears On My PC As Android Single ADB Interface, And After Attempting The Command All I Got Was What is On The Picture I Attached
mcselowa said:
I Tried The 2nd Option And The Phone Appears On My PC As Android Single ADB Interface, And After Attempting The Command All I Got Was What is On The Picture I Attached
Click to expand...
Click to collapse
That's fine! That means your phone is booting into fastboot.
So now you should try to manually install TWRP to the phone just download TWRP recovery from this Thread:
http://forum.xda-developers.com/showthread.php?t=2534420
make sure to download latest version, and then rename it to twrp-recovery.img
After that put the file inside the folder where you have fastboot and adb.
type again fastboot devices and make sure you get the same output from CMD (a lot of ? signs)
and then type:
fastboot flash recovery twrp-recovery.img
after that
fastboot reboot
the phone will try to boot into system, if it fails try the three button combo and the you should be able to boot into TWRP Recovery.
Good Luck!
jimbo77 said:
That's fine! That means your phone is booting into fastboot.
So now you should try to manually install TWRP to the phone just download TWRP recovery from this Thread:
http://forum.xda-developers.com/showthread.php?t=2534420
make sure to download latest version, and then rename it to twrp-recovery.img
After that put the file inside the folder where you have fastboot and adb.
type again fastboot devices and make sure you get the same output from CMD (a lot of ? signs)
and then type:
fastboot flash recovery twrp-recovery.img
after that
fastboot reboot
the phone will try to boot into system, if it fails try the three button combo and the you should be able to boot into TWRP Recovery.
Good Luck!
Click to expand...
Click to collapse
Im Now Trying To Flash The Recovery, @ 1st It Says Failed(Remote: Flash Failure, errno2) Second Time I Typed Fastboot devices again And It Returns ??????????? Fastboot, Which Is Diff From Previous Result. Then I Try To Flash Again And Its Stuck Saying : Sending 'recovery' (8262)...
mcselowa said:
Im Now Trying To Flash The Recovery, @ 1st It Says Failed(Remote: Flash Failure, errno2) Second Time I Typed Fastboot devices again And It Returns ??????????? Fastboot, Which Is Diff From Previous Result. Then I Try To Flash Again And Its Stuck Saying : Sending 'recovery' (8262)...
Click to expand...
Click to collapse
If TWRP fails try to flash stock recovery just name the file as recovery.img and use
fastboot flash recovery recovery.img
if that also fails, the I guess you last chance is to take to a repair center my friend...
jimbo77 said:
If TWRP fails try to flash stock recovery just name the file as recovery.img and use
fastboot flash recovery recovery.img
if that also fails, the I guess you last chance is to take to a repair center my friend...
Click to expand...
Click to collapse
Thank You Soo Much, It Finally Worked, I Changed Cables And It Worked. I Am So Grateful Right Now!
does it works for mate in b907 (4.2.2) ?
Thx
So, You have bricked your phone by installing Xposed installer ? Thinking to download and flash stock rom ? Wait wait, why waste 500mb+ data if you can do it within 16-17mb!!
Requirements-
1. Redmi 1S (bricked after installing xposed installer)
2. Windows Computer
3. USB cable
2. An internet connections to download some files.
3. Patience
4. Brain
So, lets start -
At first download these files-
Xposed Disabler zip file-
http://www6.zippyshare.com/v/39722154/file.html
Fastboot files-
http://www27.zippyshare.com/v/94099837/file.html
USB Drivers-
http://pdanet.co/a/
TWRP 2.8.3.0 Recovery -
http://d-h.st/BTG
Now,
> Install the PDAnet driver package.
> Make a folder in desktop and name it "R1S"
> Then extract the fastboot.zip file in R1S folder,
> Put the TWRP img file in R1S also (Extract it, if it is in a zip file and take out the ".img" file and put it),
> Connect Redmi 1S to PC
> Press power button + volume down button until u see a Xiaomi bunny with "Fastboot" logo.
> Now go back to PC,
> Open the R1S folder
> Rename the TWRP to "recovery"
> Now, Press shift and right click simultaneously, then select "open command prompt here"
> Type -
fastboot flash recovery recovery.img
Press enter.
> After that, disconnect it from PC.
> Take out the sd card from it and connect to computer via card reader, and copy the xposed Disabler.zip to sd card.
> Put it back to Redmi 1S
> Now, Press power button + volume up button for 15secs
> You will see the TWRP logo,
> Then select "Install" from the menu.
> Now browse and select the xposed disabler.zip file you've copied just before,
> swipe to confirm,
> Reboot.
> Hit the "like" button if it helped.
Enjoy :sly: :sly:
And don't install xposed installer again. Install WSM tools instead of xposed.
NB:- this tutorial will void your warranty, So if you want to regain warranty, just download the stock "MI recovery.img" and flash it. (Same method, like TWRP flashing)
Sent from my HM 1SW using XDA Premium 4 mobile app
great thanks
Thank You, This Worked.
If I had found this method sooner, I wouldn't had to waste 2hrs trying to flash my redmi1s with MIUI ROM and failing.
Thanks Again 'Arkaprovaz'.
For those who get the error "AdbWinApi.dll is missing" after typing this command, fastboot flash recovery recovery.img
Please, copy the "AdbWinApi.dll" file from the "AdbWinApi.rar" and paste it in the R1S folder which you had created previously. Now try executing the command. It shouldn't throw the error again.
thanks a lot man successfully recover my redmi 1s:good:
done flash TWRP RECOVERY IN PC BUT SUDDENLY NOW MY PC DOESN'T RECOGNIZE MY PHONE BY U
done flash TWRP RECOVERY IN PC BUT SUDDENLY NOW MY PC DOESN'T RECOGNIZE MY PHONE BY USB CABLE IT SAYS "usb device not recognized the last device you connected to this computer is malfunctioned and windows doesn't recognise it"
ABHIUSHA said:
done flash TWRP RECOVERY IN PC BUT SUDDENLY NOW MY PC DOESN'T RECOGNIZE MY PHONE BY USB CABLE IT SAYS "usb device not recognized the last device you connected to this computer is malfunctioned and windows doesn't recognise it"
Click to expand...
Click to collapse
reinstal usb driver may solved your problem
Does mean Xposed Tools will brick Redmi on any rom, like PAC, or just MIUI (which has WSM Tools, ofcourse)?
can I install xposed on mokee rom?
bagosbanget said:
can I install xposed on mokee rom?
Click to expand...
Click to collapse
I just installed on PAC with no problems. So, it should bricking only MIUI roms.
please help me
i am trying this method but when type in cmd mode fastboot is not recognized as an internal external command, operable program or batch file.
Thanks to all participants in this thread. I was about to lose my redmi 1s after installing Xposed tools when
this guide came to my help.
TY !
Thank you.I wiped internal storage and flashed stock recovery without realizing that my update.zip is gone.I also wiped system and everyhing before and without your tutorial with cmd I was lost because a phone with no os and just a stock recovery(which doesn't have mount option or anything similar) it's really bad.Thanks again !
thanx...
great ..
pc not recognising my device..
pc donot recognise my device what to do now.....
how to get it recognised....
how to install drivers...
Simplest way.
if you have installed Xposed, it shows that you are rooted and have a custom recovery too. In this case If you have custom recovery installed already you skip all the steps and just download XposedDisabler.zip and copy it to your SD card set it in your phone and flash it with any custom recovery and you are done.
Hope it helped.
Great Dude Thanks
cant able to unbrick my redmi 1s bricked with wsm tools ....
when i try command it shows " waiting for device" ....
any solution .... help me bro ....
ishanmakhija said:
when i try command it shows " waiting for device" ....
any solution .... help me bro ....
Click to expand...
Click to collapse
Install Device Driver properly
i followed all the steps of unbricking but not able to unbrick after Press power button + volume up button for 15secs step as not getting twrp logo can u resolve by giving any solution quickly by mailing to me @ [email protected] as quickly as possible
Bricked Redmi 1S Bricked.
Hi Friends,
I have bricked Redmi 1s by installing xposed framework.Also wiped cache, wiped user data and wiped all data.
Pls help me starting Redmi 1S.
Thanks in advance.
Prakash
Note - This will wipe all your data and Format Internal memory ! So keep a backup !
Steps :
Step 1. Download the file ADB and extract it to a folder on your desktop. Switch off your Micromax Yureka Android smartphone.
Step 2. Now connect your to the PC with USB cable and the LED near the speaker at the top goes red.
Step 3. As soon as the LED glows keep the vol up button pressed. You will see the fastboot screen.
Step 4. ON computer, open the downloaded folder 'ADB' and hold Shift button and right click on the empty
space of the folder and select “Open Command prompt window here”.
Step 5. Now in the command prompt window type the following command.
fastboot -i 0x1ebf oem unlock
This may delete all your data including the internal memory. Your bootloader is now unlocked.
Step 6. Now the next step is to install the CWM recovery. Download the CWM recovery and save/copy it on your ADB folder. Again hold Shift button and right click on the empty space of the folder and select “Open Command prompt window here”.
Step 7. Now type this on your command window:-
fastboot -i 0x1ebf flash recovery recovery-yu.img
You have successfully Install cwm recovery now ! Just press Volume up + Volume down + Power button to access CWM mode !
Step 8. Download the Superuser.zip file from here and move the file on your phone SD card.
Step 9. Once the SuperSu zip file is moved on your phone. Switch off you phone and boot in CWM recovery mode. TO do this press volume up + volume down + power button .
Step 10. Now your phone will boot on Recovery mode, for the main screen of the recover main menu Select Install zip from Sd card and Select Superuser.zip file that you copied on your phone Sd card.
Step 11. Once the files is installed, Reboot your Device.
Now your have to rooted Micromax YU Yureka.
Enjoy !
Download Link:
ADB : https://drive.google.com/folderview?id=0B05Crz57q4zgaTA4U0xtUFpmYlk&usp=sharing
CWM Recovery : https://drive.google.com/file/d/0B05Crz57q4zgd1FCdlk5NnMzV1U/view?usp=sharing
SuperSu : https://drive.google.com/file/d/0B05Crz57q4zgOHllSndBUTdYeHc/view?usp=sharing
Hit thanks, if helped
can you share the link of TWRP Recovery also...!!!
Triggered from my Nexus 10
Tried not working
Sent from my YUREKA using XDA Free mobile app
amitroutray said:
can you share the link of TWRP Recovery also...!!!
Triggered from my Nexus 10
Click to expand...
Click to collapse
TWRP recovery is now official for yu yureka. You can get flash it easily using 'TWRP Manager' app, which is available in play store.
Download Link of App : https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager
Install the app and choose your device and flash !
Hit thanks, if Helped
pbvayadande said:
Tried not working
Sent from my YUREKA using XDA Free mobile app
Click to expand...
Click to collapse
You must be doing something wrong. Double check it !
Hit thanks, if helped !
I did today morning worked. Installed cwm recovery and also rooted.
Thanks.
Sent from my YUREKA using XDA Free mobile app
pbvayadande said:
Tried not working
Sent from my YUREKA using XDA Free mobile app
Click to expand...
Click to collapse
Always check the MD5 before doing anything.
Triggered from YU
waiting for device error coming
waiting for device error coming
mfu007 said:
waiting for device error coming
Click to expand...
Click to collapse
Enable USB Debugging before connecting to your pc and give permissions (if asked, it will be displayed on your mobile screen) !
Hit thanks, if helped
prince.d.emperor said:
Enable USB Debugging before connecting to your pc and give permissions (if asked, it will be displayed on your mobile screen) !
Hit thanks, if helped
Click to expand...
Click to collapse
usb debugging enabled then also waiting for device is coming.i am using win 8 64bit.please help me
mfu007 said:
usb debugging enabled then also waiting for device is coming.i am using win 8 64bit.please help me
Click to expand...
Click to collapse
Device is not being recognised by your pc. Open command prompt in that folder and type 'adb devices' and press enter. You will get the name of your device (if recognised). If you don't get any name, then your Yureka is not being recognised and you need to install adb drivers for yureka.
You can try this one. Link : http://www.koushikdutta.com/post/universal-adb-driver
Hit thanks, if helped
I did by running bat file....
While in fastboot method I had error waiting for device
Sent from my YUREKA using XDA Free mobile app
pbvayadande said:
I did by running bat file....
While in fastboot method I had error waiting for device
Sent from my YUREKA using XDA Free mobile app
Click to expand...
Click to collapse
how.. can you explain
The instructions are incomplete so there will be no rooting unless you install proper micromax drivers for adb . Looks like the instructions were emailed and posted by someone else. Disabling driver signature enforcement is also not helpful .Tried it on 4 different systems and a fresh vm with x86,x64 win7 & win8 . drivers from koushik also does not work
abs0lut3z33r0 said:
The instructions are incomplete so there will be no rooting unless you install proper micromax drivers for adb . Looks like the instructions were emailed and posted by someone else. Disabling driver signature enforcement is also not helpful .Tried it on 4 different systems and a fresh vm with x86,x64 win7 & win8 . drivers from koushik also does not work
Click to expand...
Click to collapse
Can you please provide me the link of drivers which will help?
How I did by running bat
Links given below
http://www.informationlord.com/unlock-bootloader-micromax-yu/
http://www.informationlord.com/install-cwm-micromax-yu/
Try this simple way
Sent from my YUREKA using XDA Free mobile app
Universal naked driver along with minimal adb and fastboot worked .
Can anyone explained how I remain in Stock recovery when rooting...??
thanks in advance
Triggered from my Nexus 10
amitroutray said:
Can anyone explained how I remain in Stock recovery when rooting...??
thanks in advance
Triggered from my Nexus 10
Click to expand...
Click to collapse
This will help you out!!! http://forum.xda-developers.com/yureka/general/20-2-2015-root-flashing-custom-recovery-t3035281
amitroutray said:
Can anyone explained how I remain in Stock recovery when rooting...??
thanks in advance
Triggered from my Nexus 10
Click to expand...
Click to collapse
Get the stock recovery backed up from /dev/block/platform/xyz.. Then flash cwm, root, then flash stock recovery
-------------------------------------------
HIT Thanks if you like my post
-------------------------------------------
My work:
[TOOL]Kernel/Boot.img (un)packer
[ZIP]Flashable zip to bypass lockscreen for LG E975
[TOOL]ANDROID's COMPLETE TOOLBOX
Baseband Fix fir LG F180X converted to International E975
Hi,
My phone is bricked, cause i used twrp temporaly, to install a new rom, but after an unexpected wipe my phone lost OS files so i'm just able to use adb & fastboot with the fastboot mode, so lock & unlock oem principaly. Please help me it's very very important cause i need to use this phone ...
Thanks.
Is your bootloader (still) unlocked and do you have access to fastboot?
Veran125 said:
Is your bootloader (still) unlocked and do you have access to fastboot?
Click to expand...
Click to collapse
Yes, bootloader's still unlocked and i have acces to fastboot.
Find "Mi A2 Lite toolkit V 1.0.4.2" and use it to flash stock 8.1, it will do all the magic with a few clicks, just don't interrupt it until your phone restarts and you get the "Welcome" screen. After you can do the upgrade to Pie via OTA.
mr_techno said:
Find "Mi A2 Lite toolkit V 1.0.4.2" and use it to flash stock 8.1, it will do all the magic with a few clicks, just don't interrupt it until your phone restarts and you get the "Welcome" screen. After you can do the upgrade to Pie via OTA.
Click to expand...
Click to collapse
Thanks for your magic answer, but i can't find your toolkit, BUT i found this https://forum.xda-developers.com/mi...ol-tool-one-driversunlocktwrpfactory-t3866191. Is it good also ?
You can just get newest fastboot rom, and then flash with Miflash
Veran125 said:
You can just get newest fastboot rom, and then flash with Miflash
Click to expand...
Click to collapse
If it was too simply ... I think i did that already, But fastboot room, what do you mean with that ?
I just want, now, to be sure, can i save my phone ? It's not dead ?
Cause it's a very good phone and i don't want to loose it, really.
Nope, it's not dead, even with locked bootloader it wouldn't be. But now that you've got an unlocked bootloader, it's very easy to restore
I'm more happy so, 5 hours ( no fake really ) i search a solution .... SO
I found a global rom without .bat files in this folder so i got an error with Mi Flash Tool .. Tell me more about your idea
What's the error if I may ask?
Veran125 said:
What's the error if I may ask?
Click to expand...
Click to collapse
Can not found ( don't remember the file name).bat
FamosoFT said:
Hi,
My phone is bricked, cause i used twrp temporaly, to install a new rom, but after an unexpected wipe my phone lost OS files so i'm just able to use adb & fastboot with the fastboot mode, so lock & unlock oem principaly. Please help me it's very very important cause i need to use this phone ...
Thanks.
Click to expand...
Click to collapse
-Tente isso:
Download this official rom: https://en.miui.com/download-354.html
Download this Mi Flash Tool: http://api.en.miui.com/url/MiFlashTool
*I'm assuming you already have the ADB drivers installed on your PC
*Remember to check the CLEAN ALL option
-If the above method does not work, do the following:
* It will only work if you do not have TWRP installed, if it is with twrp installed, I recommend reinstalling the original recovery *
1-Turn off the device and press (POWER BUTTON + VOLUME UP). At that point, the android doll will appear and spelled 'NO COMMAND'
2-Press only (POWER BUTTON) and click quickly (VOLUME UP BUTTON). In this screen you will see the recovery options, use the volume buttons to go to the WIPE DATA/FACTORY RESET option, confirm with YES and restart the device.
3- Wait patiently for 3/5 minutes.
-If none of this works and you can still access twrp, I recommend you try installing a GSI rom using this method: https://forum.xda-developers.com/mi-a2-lite/how-to/guide-functional-twrp-magisk-pie-gsi-t3900119
I recommend this GSI rom (I'm using this now): https://get.resurrectionremix.com/?dir=gsi (choose 'arm64-ab')
This will give you a working system and make it easier to return to stock.
Hope one of these methods helped!
Hi all,
The problem was my PC i had not the .bat files so it couldn't work ...
Thanks @Bruno_Designer for your message, but i hate RROS but you're solution was good
FamosoFT said:
Hi,
My phone is bricked, cause i used twrp temporaly, to install a new rom, but after an unexpected wipe my phone lost OS files so i'm just able to use adb & fastboot with the fastboot mode, so lock & unlock oem principaly. Please help me it's very very important cause i need to use this phone ...
Thanks.
Click to expand...
Click to collapse
If u alredy used twrp den u have adb.
U need mi flash tool.
Download any one of the full fastboot roms for Mi A2 Lie below:
9.6.4.0: https://xiaomifirmware.com/download/10399/
9.6.10.0: https://xiaomifirmware.com/download/10867/
10.0.3: https://xiaomifirmware.com/download/11586/
So to revive ur fone, u do dis. Dis was how i did mine.
1. After downloading a rom of choice, u extract on ur pc using winrar, 7zip or izarc. U basically open the archive using any of these software n copy out the folder contained. The name usually starts with "daisy global ...."
2. U open the extracted rom folder. U will see a bunch of files including "flash_all.bat" etc and a folder called "images".
3. Click on the address bar of d rom folder and copy the address. Den open "mi flash tool" and paste d copied address in the mi flash tool address bar n click on refresh.
4. Boot ur phone to fastboot mode, using "power" & "volume down" buttons together.
connect d phone to ur pc via usb cable.
5. Open ur adb folder and open the adb command window.
Type in the following, one after the other n click enter:
" fastboot devices " dis to confirm the adb connection
" fastboot oem edl " dis to enter edl mode. Ur fone led starts blinking at 1sec intervals.
6. Back to mi flash tool, u click on "refresh". After a second ur fone should be seen as a COM port "COM 10"
7. At d bottom right, u shd find 3 options. Selct "clean all". This shd leave ur bootloader unlocked after the process.
8. U click on "flash" button at the top right. All things going well, within 10 mins the process shd be done and u will see "green" indicator with "success".
9. Hold ur fone n press d power botton for 10 secs. Then ur fone shd power up. Give ur fone exactly about 5 mins to come up "look at the clock & dnt assume"
Dis is an edit of others tutorials. But this is exactly how it worked for me. As long as u use any of the 3 roms i linked u.
Unless i use edl mode, it jus doesnt work for me.
Good luck. Leta know how it goes. And pls click thanks if i helped u.
Problem solved
Thread closed at OP request