MTP mode !! ZL C6502 - Sony Xperia ZL

Dear friends,
I have a red light issue and my phone is dead on my phone and i'm trying to reload new firmware (C6502_10.3.A.0.423_Customized_MEA) but it's says that :
10/003/2014 23:03:09 - INFO - Selected C6502 / 10.3.A.0.423 / Customized_MEA
10/003/2014 23:03:09 - INFO - Preparing files for flashing
10/003/2014 23:03:38 - INFO - Please connect your device into flashmode.
10/007/2014 23:07:00 - INFO - Device connected with USB debugging off
10/007/2014 23:07:00 - INFO - For 2011 devices line, be sure you are not in MTP mode
the main problem that i Can't boot it to change any settings.
please you help

I think you don't know what flashmode is?
Gesendet von meinem C6503 mit Tapatalk
---------- Post added at 01:47 AM ---------- Previous post was at 01:44 AM ----------
Turn phone off. Press and hold volume down key and plug in the cable. After flashtool recognized your device in flashmode (5sec) you can release the volume key
Gesendet von meinem C6503 mit Tapatalk

SafiXS said:
I think you don't know what flashmode is?
Gesendet von meinem C6503 mit Tapatalk
---------- Post added at 01:47 AM ---------- Previous post was at 01:44 AM ----------
Turn phone off. Press and hold volume down key and plug in the cable. After flashtool recognized your device in flashmode (5sec) you can release the volume key
Gesendet von meinem C6503 mit Tapatalk
Click to expand...
Click to collapse
Thank u Safixs but when I press the vol down button and connect the cable the red light blinks one time then the flashtool says ( INFO - For 2011 devices line, be sure you are not in MTP mode) and the problem is that I cannot boot my phone to change the MTP settings?

giggso11 said:
Thank u Safixs but when I press the vol down button and connect the cable the red light blinks one time then the flashtool says ( INFO - For 2011 devices line, be sure you are not in MTP mode) and the problem is that I cannot boot my phone to change the MTP settings?
Click to expand...
Click to collapse
but zl is not a 2011 device ! ignore the message
back button press - insert usb at the same time it will detect ur phone .
what happens after this message ?

demonicjas said:
but zl is not a 2011 device ! ignore the message
back button press - insert usb at the same time it will detect ur phone .
what happens after this message ?
Click to expand...
Click to collapse
I cannot press back button because as i said before my phone cannot boot at all when I connect it through USB or wall charger it shown only red light.
I'm trying all the ways just to boot my phone, I did see some guys managed to boot it.

giggso11 said:
I cannot press back button because as i said before my phone cannot boot at all when I connect it through USB or wall charger it shown only red light.
I'm trying all the ways just to boot my phone, I did see some guys managed to boot it.
Click to expand...
Click to collapse
sorry i made a mistake
press vol down and plug in cable
if still u have issue maybe its driver related ?
try another pc maybe ?
if ur phone recognizes in flashtool then it should work :S
u dont need to worry about the mtp crap for 2013 devices

demonicjas said:
sorry i made a mistake
press vol down and plug in cable
if still u have issue maybe its driver related ?
try another pc maybe ?
if ur phone recognizes in flashtool then it should work :S
u dont need to worry about the mtp crap for 2013 devices
Click to expand...
Click to collapse
I have tried all that my pc Reads the phone as a USB device and the flash tool cannot read my phone correctly, I managed to run my phone but what i do is I opened my Xperia ZL back Cover, and when I Connect it to the USB and remove the power cable (R2C5) the phone works and it shows Sony logo then it's restart and it keeps doing do u know about the chipset of ZL phone??

Dead battery issue. Go to a sony repair center.
Sent from my C6503 using xda app-developers app

Flashtool needs usb debugging enabled, if I remember correctly. And fastboot seems to need a special usb mode. I you can't boot to change those values maybe a repair in PC companion will help.
Xperia ZL, 4.2.2 Stock (.67), rooted

let me describe what I did :
1. open back cover.
2. unplug Power cable.
3. plug USB cable.
4. fun flash tool on PC.
5. Hold Vol down and connect USB cable.
6. it did flash my phone.
But now my phone stuck on Flash mode. I did Vol up and connect USB cable but it did'nt help at all it get me to blue light ??
the flashtool ask me to turn off my phone and press home button and connect the USB cable?? I don't have Home button coz my phone is not booted!!!!
Any suggestions to boot on normal mode not flash mode.

giggso11 said:
let me describe what I did :
1. open back cover.
2. unplug Power cable.
3. plug USB cable.
4. fun flash tool on PC.
5. Hold Vol down and connect USB cable.
6. it did flash my phone.
But now my phone stuck on Flash mode. I did Vol up and connect USB cable but it did'nt help at all it get me to blue light ??
the flashtool ask me to turn off my phone and press home button and connect the USB cable?? I don't have Home button coz my phone is not booted!!!!
Any suggestions to boot on normal mode not flash mode.
Click to expand...
Click to collapse
try the above solution and see if it works ..repair via pc companion

It's the same its boot in the flash mode as you can see below:
INFO - Device connected in flash mode
but when I use BLU its that i have to press the home button?? I cannot run the home button

That's crazy.
First: flashtool don't want home, it want the back button
Second: zl don't have back button when it's off, it's the volume down key
Third: you don't have a friend who had knowledge about flashing Android's? You are on the best way to kill your zl, when it's not killed right now
Gesendet von meinem C6503 mit Tapatalk

Related

[Q] Flashtool not get into flashmode

I've tried to flash "LT15_LT18_70_Baseband.ftf" on Arc phone using flashtool 8.0.0 x64, flashtoox64.exe.
I pressed flash button and check flashmod and OK, select "LT15_LT18_70_Baseband.ftf" and selected all sins and ok. Then I got usb connection guide screen and I plugged usb in arc as described at usb connection guide screen.
But the "usb connection guide screen" didn't disappear and I got these logs at flashtool application.
Please connect your device into flashmode.
- Device connected in fastboot mode
INFO - List of connected devices (Device Id) :
INFO - - USB\VID_0FCE&PID_0DDE\CB5A1FWGV2&ZLP Driver installed : true
INFO - List of ADB devices :
INFO - - none
INFO - List of fastboot devices :
INFO - - none
INFO - Device disconnected
And I tried usb connection with "flash.exe", then I got this attached picture, and still the "usb connection guide screen" didn't disappear as shown in the attached picture.
Please let me know how to connect my arc phone into flashmode.
Thanks in advance.
Have you put it in flash mode? I.e. Turn off the phone hold the menu button then connect the USB?
Sent from my LT18i using XDA
No, I pressed "Back" button as described at flashtool.
comocandle said:
No, I pressed "Back" button as described at flashtool.
Click to expand...
Click to collapse
Press and hold.
Yes, I pressed and holding "Back" button I plugged usb.
But still flashtool shows "INFO - Device connected in fastboot mode".
Phone should be in Mass Storage Mode (MSC) and you need to switch off your phone. Press and hold Back when flashtool tells you to do so, plug in the USB and release Back only when instructed.
xtacy!/ Yes, I checked MSC, and pressed and hold "Back" button when the guide picture appear.
I also tried at safe with networking, but same result.
" INFO - Device connected in fastboot mode "
This log was loaded.
Try using Media Transfer mode.. To be honest, i never used MSC mode in my lifetime while flashing with FT and has always been in MT mode..
Sent from my LT15i using XDA
Same here. I've never really used MSC mode. I prefer MTP. But the instructions say to use the former. Oh well.
Swyped from my SE Xperia arc (LT15i) using Tapatalk 2
gire.prasad/ Thanks.
I changed twice, then it works.
If it tells you you're on Fastboot mode, then it's not the correct key you're holding. If it needs flashmode, your led should turn green, if it turns blue, it's on Fastboot mode.
You can try this by powering off your phone and trying holding down keys until the green led is on. (Dunno which one is for Arc, I have a Pro).

[Q] Xperia S - red led

Hello sorry my english is bad. I got problem with my phone. Phone dont turn on, when i connect to wall charger or pc only red led turn on. Pc see phone as semc usb device. When a try to flash with flashtool only this show device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode how i can turn on debugging usb when i cant run the phone. Seus dont see phone. Please help.:crying:
Try this method
If it helps you then thank me
First off everything remove the SIM card and let the phone rest for five minutes and put the SIM and
Press the power button and volume up button at the same time for little long time your phone wil start as normal
Some times **** happens bro
Sent from my LT26i using xda app-developers app
Dont work for me
lukasz8504 said:
Hello sorry my english is bad. I got problem with my phone. Phone dont turn on, when i connect to wall charger or pc only red led turn on. Pc see phone as semc usb device. When a try to flash with flashtool only this show device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode how i can turn on debugging usb when i cant run the phone. Seus dont see phone. Please help.:crying:
Click to expand...
Click to collapse
Connect in flashtool, relock bootloader. Use seus to install fresh fw.
lukasz8504 said:
Dont work for me
Click to expand...
Click to collapse
Ok i find this tread http://forum.xda-developers.com/showthread.php?t=1527159 but when i try to enter flashmode i see this message device conected with usb debugging off for 2011 devices line be sure you are not in mtp mode
Try to use a different charger. I got the same bug with a sola . It worked with a samsung wallcharger. The sola was not loading with the sony charger when i turned it of. Other's reported this bug when phone turns off because of empty battery.
I try charger from se x10, xperia s, iphone 3gs and zte blade and nothing change still red led and after few minute red turn off and then pc see phone but in flashtool only this message device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode
lukasz8504 said:
I try charger from se x10, xperia s, iphone 3gs and zte blade and nothing change still red led and after few minute red turn off and then pc see phone but in flashtool only this message device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode
Click to expand...
Click to collapse
I think your phone hard bricked !
In this situation if you couldn't reset your phone by holding power+volume up till it 3 times vibrate , try power+volume down when you connected to pc sometimes it reset your phone.
try power+volume up when you plugged in wall charger till 3 times vibrate ( in some situations it happens after 30 second you hold both.
If none on this reset your phone , its only way that you send it to repare service of sony to re write your bootloader by JTAG box. I had the same problem when I install an improper kernel and I search all of net and try all thing I found but after 2 week I can't solve the problem and only way to back your phone to work is, re writing your bootloader by JTAG box
Anybody can help? maybe trim area problem??
that happened to me once. I removed the battery, connected the wall charger, and then put the battery back. It was the last thing I tried and it worked.
(Yes, I had to open the phone, so I don't have warranty)
waiflih said:
that happened to me once. I removed the battery, connected the wall charger, and then put the battery back. It was the last thing I tried and it worked.
(Yes, I had to open the phone, so I don't have warranty)
Click to expand...
Click to collapse
I try this and red led blink now
Can you now plug in to pc holding volume down to get flash mode though?
Sent from my LT26i using Tapatalk 2
When i connect to pc with volume down in flashtool see for devices 2011... mtp mode, device manager show semc flash device and somthing new sony ericsson seehcri control device
Does the led stop going red then?
Sent from my LT26i using Tapatalk 2
Yes when connect to pc red led turn off, flashtool see phono but not in flashmode
Did you repaired it bro
No my phone is in second service and i must wait. I find possible solution but cant try it. http://forum.xda-developers.com/showthread.php?t=1910029
Are you sure you're connecting.phone to PC in flashmode? (holding down the volume button while plugging in the phone)
Good luck there then
lukasz8504 said:
Hello sorry my english is bad. I got problem with my phone. Phone dont turn on, when i connect to wall charger or pc only red led turn on. Pc see phone as semc usb device. When a try to flash with flashtool only this show device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode how i can turn on debugging usb when i cant run the phone. Seus dont see phone. Please help.:crying:
Click to expand...
Click to collapse
I had this pr0blem but s0lved it ..!!"
Jxt remove y0ur sim card wait f0r 10 sec0ndz Then v0lume up + P0wer f0r 5 sec0ndz and the ph0ne will vibrate 3 times after that release butt0nz n p0wer 0n the device d0nt plug in the charger then it will turn 0n and say shutting d0wn and after when it shut down plug it ........ Pr0b s0lved

[Help] Can't put Xperia ion in fasrboot

i want to unlock bootloader of xperia ion LT28h(6.1.E0.233) android version 4.0.4 . i got my key from http://unlockbootloader.sonymobile.com
but when i try to put my ion in fastboot by holding the volum up key and connect it with pc the blue led shine for some second and then red led shine and phone is charging...
viral316 said:
i want to unlock bootloader of xperia ion LT28h(6.1.E0.233) android version 4.0.4 . i got my key from http://unlockbootloader.sonymobile.com
but when i try to put my ion in fastboot by holding the volum up key and connect it with pc the blue led shine for some second and then red led shine and phone is charging...
Click to expand...
Click to collapse
Did you check if Unlocking bootloader is allowed first in the service menu ?
Karim Kahale said:
Did you check if Unlocking bootloader is allowed first in the service menu ?
Click to expand...
Click to collapse
Yes mate I Check. It say allow unlock bootloader : Yes.
See the screenshot.
Sent from my LT28h using Tapatalk 2
viral316 said:
Yes mate I Check. It say allow unlock bootloader : Yes.
See the screenshot.
Sent from my LT28h using Tapatalk 2
Click to expand...
Click to collapse
Are you sure then that you're holding the right keys, maybe you should try different buttons.
Karim Kahale said:
Are you sure then that you're holding the right keys, maybe you should try different buttons.
Click to expand...
Click to collapse
Yes mate i search a lot and for xperia ion
Volume Up + USB cable connected to PC -> FASTBOOT MODE (BLUE LED will light up)
Volume Down + USB cable connected to PC -> FLASHMODE (GREEN LED will light up)
when i connect it to pc while holding volum up key the blue led light up for around 10 second and then its off and red led light up and phone is charging...
viral316 said:
Yes mate i search a lot and for xperia ion
Volume Up + USB cable connected to PC -> FASTBOOT MODE (BLUE LED will light up)
Volume Down + USB cable connected to PC -> FLASHMODE (GREEN LED will light up)
when i connect it to pc while holding volum up key the blue led light up for around 10 second and then its off and red led light up and phone is charging...
Click to expand...
Click to collapse
1-Download first Android SDK
2- Open device manager in windows
3- Connect usb cable to your phone pushing vol up button
4- Device manager will show you fastboot device for 2-3 sec (before the phone goes to charge mode). Right click on fastboot device and install drivers from C:\Android\sdk\extras\google\usb_driver
4) Reconnect usb cable pushing volup button
Karim Kahale said:
1-Download first Android SDK
2- Open device manager in windows
3- Connect usb cable to your phone pushing vol up button
4- Device manager will show you fastboot device for 2-3 sec (before the phone goes to charge mode). Right click on fastboot device and install drivers from C:\Android\sdk\extras\google\usb_driver
4) Reconnect usb cable pushing volup button
Click to expand...
Click to collapse
it did't work mate...
but i download SE Bootloader_Unlocking_Relocking_1.6 and in this i found Flashtool-drivers and i install this driver and it work...now i can put my ion in fastboot mod...Thanks...
Regards
Viral

[Q] Help! My screen wont turn on and it phone only virbrates

Hey everyone i kinda fixed my power problem, i'm currently using a small pin to turn my phone on but now i have another problem. My phone only vibrates and then the screen does nothing. Like i said i have only just put a new flex cable in. Also when i plug my phone into a laptop, it keeps connections and disconnected. CAN ANYONE HELP? The phone will power on but nothing happens with the screen and it wont stay connected to the computer
Download flashtool and when you have downloaded flashtool install the drivers in the flashtool folder and download a ftf file for your phone and put it in flashtool folder then firmwares then open flashtool and press the flash icon then press flashmode and select your ftf file then press flash then follow the instructions.
Sent from my R800i using xda app-developers app
FaiselW said:
Download flashtool and when you have downloaded flashtool install the drivers in the flashtool folder and download a ftf file for your phone and put it in flashtool folder then firmwares then open flashtool and press the flash icon then press flashmode and select your ftf file then press flash then follow the instructions.
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Thankyou for the comment but how can i do this when my phone wont stay connected to my computer?
Open flashtool and hold the back button while plugging in your phone and it should say phone connected in flash mode
Sent from my R800i using xda app-developers app
FaiselW said:
Open flashtool and hold the back button while plugging in your phone and it should say phone connected in flash mode
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Im trying this right now but nothing is happening, it is just telling me to unplug in and do the steps and thats it. Am i doing anything wrong? I have installed all the drivers and using a .ftf file. The phones screen is doing nothing and it has a orange light when the usb is plugged in.
Do not connect your phone then press the flash icon then select your ftf file then press flash and it will say preparing files for flashing you should then get a message showing up and press back while plugging in phone
Sent from my R800i using xda app-developers app
FaiselW said:
Do not connect your phone then press the flash icon then select your ftf file then press flash and it will say preparing files for flashing you should then get a message showing up and press back while plugging in phone
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
I have done all that, the last things it says on the log is this and then nothing happends
Preparing files for flashing
04/031/2013 18:31:14 - INFO - Please connect your device into flashmode.
04/032/2013 18:32:03 - INFO - Device connected with USB debugging off
04/032/2013 18:32:03 - INFO - For 2011 devices line, be sure you are not in MTP mode
Vinixdzn said:
Hey everyone i kinda fixed my power problem, i'm currently using a small pin to turn my phone on but now i have another problem. My phone only vibrates and then the screen does nothing. Like i said i have only just put a new flex cable in. Also when i plug my phone into a laptop, it keeps connections and disconnected. CAN ANYONE HELP? The phone will power on but nothing happens with the screen and it wont stay connected to the computer
Click to expand...
Click to collapse
I too had that problem once, it was because of the cable, i changed the data cable and the problem solved for me...
and for flashing FTF follow the tutorial by FMA965 here: http://forum.xda-developers.com/showthread.php?t=2054486
this tutorial is the easy one... and thank fma965
velan1 said:
I too had that problem once, it was because of the cable, i changed the data cable and the problem solved for me...
and for flashing FTF follow the tutorial by FMA965 here: http://forum.xda-developers.com/showthread.php?t=2054486
this tutorial is the easy one... and thank fma965
Click to expand...
Click to collapse
Thankyou but on the tut is says when you plug in the usb the LED light should be green but mines orange
Vinixdzn said:
Thankyou but on the tut is says when you plug in the usb the LED light should be green but mines orange
Click to expand...
Click to collapse
try remove the battery insert it again and connect holding the back button when it asks to connect ur phone to flash...
velan1 said:
try remove the battery insert it again and connect holding the back button when it asks to connect ur phone to flash...
Click to expand...
Click to collapse
I have done all that, this is the last thing that appears on the log
Preparing files for flashing
04/031/2013 18:31:14 - INFO - Please connect your device into flashmode.
04/032/2013 18:32:03 - INFO - Device connected with USB debugging off
04/032/2013 18:32:03 - INFO - For 2011 devices line, be sure you are not in MTP mode
Vinixdzn said:
I have done all that, this is the last thing that appears on the log
Preparing files for flashing
04/031/2013 18:31:14 - INFO - Please connect your device into flashmode.
04/032/2013 18:32:03 - INFO - Device connected with USB debugging off
04/032/2013 18:32:03 - INFO - For 2011 devices line, be sure you are not in MTP mode
Click to expand...
Click to collapse
that log will appear if you connect your phone turned on during the flash.
you may already know that you have switch off your mobile and connect to pc by holding back button to flash.
since it show this log it seems your phone is turned on, don't know your problem hope someone helps you...
velan1 said:
that log will appear if you connect your phone turned on during the flash.
you may already know that you have switch off your mobile and connect to pc by holding back button to flash.
since it show this log it seems your phone is turned on, don't know your problem hope someone helps you...
Click to expand...
Click to collapse
This is what it says, 04/031/2013 19:31:42 - INFO - Selected R800i / 4.0.2.A.0.62 / (1253-4437)
04/031/2013 19:31:42 - INFO - Preparing files for flashing
04/031/2013 19:31:45 - INFO - Please connect your device into flashmode.
04/032/2013 19:32:07 - INFO - Device connected with USB debugging off
04/032/2013 19:32:07 - INFO - For 2011 devices line, be sure you are not in MTP mode
velan1 said:
that log will appear if you connect your phone turned on during the flash.
you may already know that you have switch off your mobile and connect to pc by holding back button to flash.
since it show this log it seems your phone is turned on, don't know your problem hope someone helps you...
Click to expand...
Click to collapse
I think i know what the problem is, my debugging mode is not on, do you know how i can turn it on without using the phone?
Vinixdzn said:
I think i know what the problem is, my debugging mode is not on, do you know how i can turn it on without using the phone?
Click to expand...
Click to collapse
Debugging mode have nothing with your problem. It only means that you didn't entered in flashmode.
I think you have problem with flex cable, maybe you should reopen your Play and check flex cable again.
Try to hold search when plugining in phone, flashtool should report that you are in fastboot mode. If flashtool again report error (that "debugging not on") it means that maybe your keyboard is not working. Or flex. Or both.
But make sure you also try different usb cable and/or different usb port on motherboard (mainly back ports, sometime front ports can be jirky for unknown reason)
Bakisha said:
Debugging mode have nothing with your problem. It only means that you didn't entered in flashmode.
I think you have problem with flex cable, maybe you should reopen your Play and check flex cable again.
Try to hold search when plugining in phone, flashtool should report that you are in fastboot mode. If flashtool again report error (that "debugging not on") it means that maybe your keyboard is not working. Or flex. Or both.
But make sure you also try different usb cable and/or different usb port on motherboard (mainly back ports, sometime front ports can be jirky for unknown reason)
Click to expand...
Click to collapse
Cheers for the information, i have seen somewhere that when you plug in your usb into your phone, the LED colour should be green but mines orange atm and i have only recently just put a new flex cable in. My phone doesn't seem to be getting any better
Hold down back button while plugging in your phone
Sent from my R800i using xda app-developers app

[Q] xperia play r800i strangely bricked

my xperia play r800i wont boot, it show signs of charging e.g blinking red light, red light, amber light, green light but wont boot, when i remove the battery and re insert it it will vibrate and then nothing, not even the backlight turns on just a black screen, i cannot get it to go into fastboot mode strangely so i am unable to unlock the bootloader and therefore unable to flash it back to stock, if some-one could point me to a video guide on how to get it to go to fastboot mode. with the pc companion tool it first saw it as "null" device but after updating it to latest firmware through it it reconises it as an r800 xperia play yet i am unable to browse files at all on it. i have also re updated it through update service but again nothing. this phone is out of warranty so that isn't an option. if anyone could help it would be awesome.
spazmoid said:
my xperia play r800i wont boot, it show signs of charging e.g blinking red light, red light, amber light, green light but wont boot, when i remove the battery and re insert it it will vibrate and then nothing, not even the backlight turns on just a black screen, i cannot get it to go into fastboot mode strangely so i am unable to unlock the bootloader and therefore unable to flash it back to stock, if some-one could point me to a video guide on how to get it to go to fastboot mode. with the pc companion tool it first saw it as "null" device but after updating it to latest firmware through it it reconises it as an r800 xperia play yet i am unable to browse files at all on it. i have also re updated it through update service but again nothing. this phone is out of warranty so that isn't an option. if anyone could help it would be awesome.
Click to expand...
Click to collapse
just to be clear to put it into fast boot mode i have attempeted the following
remove battery, wait 5 seconds, reinsert battery, hold search and power simltaniously, nothing
remove battery, wait 5 seconds, reinsert battery, press power until vibration while holding search, nothing
remove battery, hold search, reinsert battery still holding search, hold power button while still holding search, nothing
remove battery, wait 5 seconds, reinsert battery, hold search, insert usb, begins charging... no blue light
it shows no sign of charging after i "turn it on" the light goes out but i know that the front plate, i.e screen,menu buttons is not completely unresponsive as if i hold the return button when i insert the usb it recognizes it different as i was trying to flash it earlyer and it is required in the updating process, please help
it seems if i leave it plugged in via usb it will randomly disconnect and reconnect from the computer and yes pc companion will say that the device is detected every time. its almost as if it is stuck in an invisible and very fast bootloop as it disconnects and reconnects at about 5 second intervals, this only happens after it has been "turned on"
it also appears that the battery drains very rapidly as after only a few minuets of removing battery holding power ect. it will no longer "turn on" and no light will turn on through a usb socket but when plugged into the wall after a short pause it shows the amber charging light. could this be a battery problem? con the xperia play normally boot off wall power without a battery? if so then it is the devices problem as mine cannot but if it cant normally then maybe its the battery, i have a new one ordered and will arive soon and i will keep you posted.
spazmoid said:
just to be clear to put it into fast boot mode i have attempeted the following
remove battery, wait 5 seconds, reinsert battery, hold search and power simltaniously, nothing
remove battery, wait 5 seconds, reinsert battery, press power until vibration while holding search, nothing
remove battery, hold search, reinsert battery still holding search, hold power button while still holding search, nothing
remove battery, wait 5 seconds, reinsert battery, hold search, insert usb, begins charging... no blue light
Click to expand...
Click to collapse
U can restore ur device with flashtools
U can download it from flashtool.net
After u downloaded flashtool and installed right drivers go here : http://forum.xda-developers.com/showthread.php?t=2184897
and download one of r800i .ftf file
Then turn off ur phone and hold back button and plugin usb power led should turn to green
After that open flashtools and click on flash button on top left then select flashmode and find ftf file and select flash
Sent from my R800i using xda premium
if its not clear it is acting extremely erratically with no clear logic but a few things are constant. no boot. no fastboot mode, charging light, pc companion recognizes it. have tried to be as detailed as possible so that someone may be able to pinpoint my problem.
raminta said:
U can restore ur device with flashtools
U can download it from flashtool.net
After u downloaded flashtool and installed right drivers go here : http://forum.xda-developers.com/showthread.php?t=2184897
and download one of r800i .ftf file
Then turn off ur phone and hold back button and plugin usb power led should turn to green
After that open flashtools and click on flash button on top left then select flashmode and find ftf file and select flash
Sent from my R800i using xda premium
Click to expand...
Click to collapse
i have installed "emma" and done as you said, it recognises my phone but also recognises that it is "locked" and points me towards the sony site where you unlock the boot-loader but i cannont follow the instructions there as i can not get it to go into fastboot mode.
spazmoid said:
i have installed "emma" and done as you said, it recognises my phone but also recognises that it is "locked" and points me towards the sony site where you unlock the boot-loader but i cannont follow the instructions there as i can not get it to go into fastboot mode.
Click to expand...
Click to collapse
If u use flashtool u can restore ur phone without unlocked bootloader because Flashmode doesn't require unlocked bootloader
Sent from my R800i using xda premium
raminta said:
If u use flashtool u can restore ur phone without unlocked bootloader because Flashmode doesn't require unlocked bootloader
Sent from my R800i using xda premium
Click to expand...
Click to collapse
could you plese link to a download as whenever i look for flashtools i just get emma
spazmoid said:
my xperia play r800i wont boot, it show signs of charging e.g blinking red light, red light, amber light, green light but wont boot, when i remove the battery and re insert it it will vibrate and then nothing, not even the backlight turns on just a black screen, i cannot get it to go into fastboot mode strangely so i am unable to unlock the bootloader and therefore unable to flash it back to stock, if some-one could point me to a video guide on how to get it to go to fastboot mode. with the pc companion tool it first saw it as "null" device but after updating it to latest firmware through it it reconises it as an r800 xperia play yet i am unable to browse files at all on it. i have also re updated it through update service but again nothing. this phone is out of warranty so that isn't an option. if anyone could help it would be awesome.
Click to expand...
Click to collapse
btw what you did with your device that it bricked like this
kks111 said:
btw what you did with your device that it bricked like this
Click to expand...
Click to collapse
nothing, thats the strange thing, i just put it on charge one day and then... poof, dead
I've got the exact same issue, but i know how you could get into flashmode or fastboot mode.
Pull the battery out and insert the usb cable (when connected to the Pc of course) and put the usb cable in the phone while holding either back or the search button. Nownit should be in the sepected mode
Gesendet von meinem Nexus 5 mit Tapatalk
Spatinator said:
I've got the exact same issue, but i know how you could get into flashmode or fastboot mode.
Pull the battery out and insert the usb cable (when connected to the Pc of course) and put the usb cable in the phone while holding either back or the search button. Nownit should be in the sepected mode
Gesendet von meinem Nexus 5 mit Tapatalk
Click to expand...
Click to collapse
thanks ill try that, does a blue light on the top come on in fastboot mode?
spazmoid said:
thanks ill try that, does a blue light on the top come on in fastboot mode?
Click to expand...
Click to collapse
that diddnt work as flashtool did not recognise it at all and nothing happend on the phone
plud when in flashmode flashtool failed because it said
checking headers
error
error-error flashing aborted
spazmoid said:
plud when in flashmode flashtool failed because it said
checking headers
error
error-error flashing aborted
Click to expand...
Click to collapse
the exact text was
04/010/2014 18:10:34 - INFO - Device connected in flash mode
04/011/2014 18:11:03 - INFO - Selected null
04/011/2014 18:11:03 - INFO - Flash canceled
04/018/2014 18:18:32 - INFO - Device disconnected
04/020/2014 18:20:47 - INFO - Device connected with USB debugging off
04/020/2014 18:20:47 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/020/2014 18:20:59 - INFO - Device disconnected
04/022/2014 18:22:33 - INFO - Device connected in flash mode
04/023/2014 18:23:28 - INFO - Selected Bundle for Xperia Play. FW release : Release. Customization : Generic UK
04/023/2014 18:23:28 - INFO - Preparing files for flashing
04/023/2014 18:23:28 - INFO - Please connect your device into flashmode.
04/023/2014 18:23:29 - INFO - Opening device for R/W
04/023/2014 18:23:29 - INFO - Device connected in flash mode
04/023/2014 18:23:29 - INFO - Start Flashing
04/023/2014 18:23:29 - INFO - Processing loader.sin
04/023/2014 18:23:29 - INFO - Checking header
04/023/2014 18:23:29 - INFO - Ending flash session
04/023/2014 18:23:29 - ERROR -
04/023/2014 18:23:29 - ERROR - Error flashing. Aborted
anyone got a solution?
If your bootloader is unlocked, use this method, BUT BE SURE to carrefully READ the steps, ESPECIALLY the steps "when to connect cable to phone"
http://forum.xda-developers.com/showthread.php?t=1504809
senadin001 said:
If your bootloader is unlocked, use this method, BUT BE SURE to carrefully READ the steps, ESPECIALLY the steps "when to connect cable to phone"
http://forum.xda-developers.com/showthread.php?t=1504809
Click to expand...
Click to collapse
i already said my bootloader wasn't unlocked
spazmoid said:
i already said my bootloader wasn't unlocked
Click to expand...
Click to collapse
Than do the steps from link i posted
senadin001 said:
Than do the steps from link i posted
Click to expand...
Click to collapse
i said that i already tried this to no avail
Does your flashmode stop after a little bit of time? It does on mine, that's really strange
Gesendet von meinem Nexus 5 mit Tapatalk
---------- Post added at 07:53 AM ---------- Previous post was at 07:46 AM ----------
Try to get into fastboot mode with that method i told you above. Then try to unlock your bootloader.
Pull battery out -> insert usb cable first in computer -> connect it to the Play while holding the search button -> put the battery in while still holding the search button -> then you can release the button and you should be in fastboot mode.
That's at least how it worked for me. I then flashed new software. Mine can boot to the kernel where it then shows an image and shuts down. No matter what kernel/rom I am trying.
Gesendet von meinem Nexus 5 mit Tapatalk
Here a link to my thread
http://forum.xda-developers.com/showthread.php?t=2668432

Categories

Resources