Hello sorry my english is bad. I got problem with my phone. Phone dont turn on, when i connect to wall charger or pc only red led turn on. Pc see phone as semc usb device. When a try to flash with flashtool only this show device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode how i can turn on debugging usb when i cant run the phone. Seus dont see phone. Please help.:crying:
Try this method
If it helps you then thank me
First off everything remove the SIM card and let the phone rest for five minutes and put the SIM and
Press the power button and volume up button at the same time for little long time your phone wil start as normal
Some times **** happens bro
Sent from my LT26i using xda app-developers app
Dont work for me
lukasz8504 said:
Hello sorry my english is bad. I got problem with my phone. Phone dont turn on, when i connect to wall charger or pc only red led turn on. Pc see phone as semc usb device. When a try to flash with flashtool only this show device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode how i can turn on debugging usb when i cant run the phone. Seus dont see phone. Please help.:crying:
Click to expand...
Click to collapse
Connect in flashtool, relock bootloader. Use seus to install fresh fw.
lukasz8504 said:
Dont work for me
Click to expand...
Click to collapse
Ok i find this tread http://forum.xda-developers.com/showthread.php?t=1527159 but when i try to enter flashmode i see this message device conected with usb debugging off for 2011 devices line be sure you are not in mtp mode
Try to use a different charger. I got the same bug with a sola . It worked with a samsung wallcharger. The sola was not loading with the sony charger when i turned it of. Other's reported this bug when phone turns off because of empty battery.
I try charger from se x10, xperia s, iphone 3gs and zte blade and nothing change still red led and after few minute red turn off and then pc see phone but in flashtool only this message device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode
lukasz8504 said:
I try charger from se x10, xperia s, iphone 3gs and zte blade and nothing change still red led and after few minute red turn off and then pc see phone but in flashtool only this message device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode
Click to expand...
Click to collapse
I think your phone hard bricked !
In this situation if you couldn't reset your phone by holding power+volume up till it 3 times vibrate , try power+volume down when you connected to pc sometimes it reset your phone.
try power+volume up when you plugged in wall charger till 3 times vibrate ( in some situations it happens after 30 second you hold both.
If none on this reset your phone , its only way that you send it to repare service of sony to re write your bootloader by JTAG box. I had the same problem when I install an improper kernel and I search all of net and try all thing I found but after 2 week I can't solve the problem and only way to back your phone to work is, re writing your bootloader by JTAG box
Anybody can help? maybe trim area problem??
that happened to me once. I removed the battery, connected the wall charger, and then put the battery back. It was the last thing I tried and it worked.
(Yes, I had to open the phone, so I don't have warranty)
waiflih said:
that happened to me once. I removed the battery, connected the wall charger, and then put the battery back. It was the last thing I tried and it worked.
(Yes, I had to open the phone, so I don't have warranty)
Click to expand...
Click to collapse
I try this and red led blink now
Can you now plug in to pc holding volume down to get flash mode though?
Sent from my LT26i using Tapatalk 2
When i connect to pc with volume down in flashtool see for devices 2011... mtp mode, device manager show semc flash device and somthing new sony ericsson seehcri control device
Does the led stop going red then?
Sent from my LT26i using Tapatalk 2
Yes when connect to pc red led turn off, flashtool see phono but not in flashmode
Did you repaired it bro
No my phone is in second service and i must wait. I find possible solution but cant try it. http://forum.xda-developers.com/showthread.php?t=1910029
Are you sure you're connecting.phone to PC in flashmode? (holding down the volume button while plugging in the phone)
Good luck there then
lukasz8504 said:
Hello sorry my english is bad. I got problem with my phone. Phone dont turn on, when i connect to wall charger or pc only red led turn on. Pc see phone as semc usb device. When a try to flash with flashtool only this show device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode how i can turn on debugging usb when i cant run the phone. Seus dont see phone. Please help.:crying:
Click to expand...
Click to collapse
I had this pr0blem but s0lved it ..!!"
Jxt remove y0ur sim card wait f0r 10 sec0ndz Then v0lume up + P0wer f0r 5 sec0ndz and the ph0ne will vibrate 3 times after that release butt0nz n p0wer 0n the device d0nt plug in the charger then it will turn 0n and say shutting d0wn and after when it shut down plug it ........ Pr0b s0lved
Related
Hey everyone i kinda fixed my power problem, i'm currently using a small pin to turn my phone on but now i have another problem. My phone only vibrates and then the screen does nothing. Like i said i have only just put a new flex cable in. Also when i plug my phone into a laptop, it keeps connections and disconnected. CAN ANYONE HELP? The phone will power on but nothing happens with the screen and it wont stay connected to the computer
Download flashtool and when you have downloaded flashtool install the drivers in the flashtool folder and download a ftf file for your phone and put it in flashtool folder then firmwares then open flashtool and press the flash icon then press flashmode and select your ftf file then press flash then follow the instructions.
Sent from my R800i using xda app-developers app
FaiselW said:
Download flashtool and when you have downloaded flashtool install the drivers in the flashtool folder and download a ftf file for your phone and put it in flashtool folder then firmwares then open flashtool and press the flash icon then press flashmode and select your ftf file then press flash then follow the instructions.
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Thankyou for the comment but how can i do this when my phone wont stay connected to my computer?
Open flashtool and hold the back button while plugging in your phone and it should say phone connected in flash mode
Sent from my R800i using xda app-developers app
FaiselW said:
Open flashtool and hold the back button while plugging in your phone and it should say phone connected in flash mode
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Im trying this right now but nothing is happening, it is just telling me to unplug in and do the steps and thats it. Am i doing anything wrong? I have installed all the drivers and using a .ftf file. The phones screen is doing nothing and it has a orange light when the usb is plugged in.
Do not connect your phone then press the flash icon then select your ftf file then press flash and it will say preparing files for flashing you should then get a message showing up and press back while plugging in phone
Sent from my R800i using xda app-developers app
FaiselW said:
Do not connect your phone then press the flash icon then select your ftf file then press flash and it will say preparing files for flashing you should then get a message showing up and press back while plugging in phone
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
I have done all that, the last things it says on the log is this and then nothing happends
Preparing files for flashing
04/031/2013 18:31:14 - INFO - Please connect your device into flashmode.
04/032/2013 18:32:03 - INFO - Device connected with USB debugging off
04/032/2013 18:32:03 - INFO - For 2011 devices line, be sure you are not in MTP mode
Vinixdzn said:
Hey everyone i kinda fixed my power problem, i'm currently using a small pin to turn my phone on but now i have another problem. My phone only vibrates and then the screen does nothing. Like i said i have only just put a new flex cable in. Also when i plug my phone into a laptop, it keeps connections and disconnected. CAN ANYONE HELP? The phone will power on but nothing happens with the screen and it wont stay connected to the computer
Click to expand...
Click to collapse
I too had that problem once, it was because of the cable, i changed the data cable and the problem solved for me...
and for flashing FTF follow the tutorial by FMA965 here: http://forum.xda-developers.com/showthread.php?t=2054486
this tutorial is the easy one... and thank fma965
velan1 said:
I too had that problem once, it was because of the cable, i changed the data cable and the problem solved for me...
and for flashing FTF follow the tutorial by FMA965 here: http://forum.xda-developers.com/showthread.php?t=2054486
this tutorial is the easy one... and thank fma965
Click to expand...
Click to collapse
Thankyou but on the tut is says when you plug in the usb the LED light should be green but mines orange
Vinixdzn said:
Thankyou but on the tut is says when you plug in the usb the LED light should be green but mines orange
Click to expand...
Click to collapse
try remove the battery insert it again and connect holding the back button when it asks to connect ur phone to flash...
velan1 said:
try remove the battery insert it again and connect holding the back button when it asks to connect ur phone to flash...
Click to expand...
Click to collapse
I have done all that, this is the last thing that appears on the log
Preparing files for flashing
04/031/2013 18:31:14 - INFO - Please connect your device into flashmode.
04/032/2013 18:32:03 - INFO - Device connected with USB debugging off
04/032/2013 18:32:03 - INFO - For 2011 devices line, be sure you are not in MTP mode
Vinixdzn said:
I have done all that, this is the last thing that appears on the log
Preparing files for flashing
04/031/2013 18:31:14 - INFO - Please connect your device into flashmode.
04/032/2013 18:32:03 - INFO - Device connected with USB debugging off
04/032/2013 18:32:03 - INFO - For 2011 devices line, be sure you are not in MTP mode
Click to expand...
Click to collapse
that log will appear if you connect your phone turned on during the flash.
you may already know that you have switch off your mobile and connect to pc by holding back button to flash.
since it show this log it seems your phone is turned on, don't know your problem hope someone helps you...
velan1 said:
that log will appear if you connect your phone turned on during the flash.
you may already know that you have switch off your mobile and connect to pc by holding back button to flash.
since it show this log it seems your phone is turned on, don't know your problem hope someone helps you...
Click to expand...
Click to collapse
This is what it says, 04/031/2013 19:31:42 - INFO - Selected R800i / 4.0.2.A.0.62 / (1253-4437)
04/031/2013 19:31:42 - INFO - Preparing files for flashing
04/031/2013 19:31:45 - INFO - Please connect your device into flashmode.
04/032/2013 19:32:07 - INFO - Device connected with USB debugging off
04/032/2013 19:32:07 - INFO - For 2011 devices line, be sure you are not in MTP mode
velan1 said:
that log will appear if you connect your phone turned on during the flash.
you may already know that you have switch off your mobile and connect to pc by holding back button to flash.
since it show this log it seems your phone is turned on, don't know your problem hope someone helps you...
Click to expand...
Click to collapse
I think i know what the problem is, my debugging mode is not on, do you know how i can turn it on without using the phone?
Vinixdzn said:
I think i know what the problem is, my debugging mode is not on, do you know how i can turn it on without using the phone?
Click to expand...
Click to collapse
Debugging mode have nothing with your problem. It only means that you didn't entered in flashmode.
I think you have problem with flex cable, maybe you should reopen your Play and check flex cable again.
Try to hold search when plugining in phone, flashtool should report that you are in fastboot mode. If flashtool again report error (that "debugging not on") it means that maybe your keyboard is not working. Or flex. Or both.
But make sure you also try different usb cable and/or different usb port on motherboard (mainly back ports, sometime front ports can be jirky for unknown reason)
Bakisha said:
Debugging mode have nothing with your problem. It only means that you didn't entered in flashmode.
I think you have problem with flex cable, maybe you should reopen your Play and check flex cable again.
Try to hold search when plugining in phone, flashtool should report that you are in fastboot mode. If flashtool again report error (that "debugging not on") it means that maybe your keyboard is not working. Or flex. Or both.
But make sure you also try different usb cable and/or different usb port on motherboard (mainly back ports, sometime front ports can be jirky for unknown reason)
Click to expand...
Click to collapse
Cheers for the information, i have seen somewhere that when you plug in your usb into your phone, the LED colour should be green but mines orange atm and i have only recently just put a new flex cable in. My phone doesn't seem to be getting any better
Hold down back button while plugging in your phone
Sent from my R800i using xda app-developers app
My Xperia Play won't turn on.
When I press the power button, it vibrates like it's turning on but nothing comes on the screen.
The phone charges ok - shows a red LED when charging and green when full.
If I plug it into the PC it detects something but PC Companion doesn't recognise it as an Xperia Play - it just says Phone detected, then gives list of things to do on the phone's screen (pull down status bar and click connect) but I can't do this as the phone doesn't show anything on the screen.
I've tried loading flashtool to re-flash an FTF file, but it won't work unless USB debugging is turned on - again, I can't do because the phone doesn't boot up or show anything on the screen.
Can anyone think of anything that I can do to try and get it working again?
danlat1415 said:
My Xperia Play won't turn on.
I've tried loading flashtool to re-flash an FTF file, but it won't work unless USB debugging is turned on - again, I can't do because the phone doesn't boot up or show anything on the screen.
Click to expand...
Click to collapse
To flash stock ftf, you must turn off phone, select ftf from flashtool, and when flashtool ask you to, press back on phone and while keeping it pressed, plug usb cable
It also can be hardware problem, most probably flex cable (most vurnerable peace in Play)
Bakisha said:
To flash stock ftf, you must turn off phone, select ftf from flashtool, and when flashtool ask you to, press back on phone and while keeping it pressed, plug usb cable
It also can be hardware problem, most probably flex cable (most vurnerable peace in Play)
Click to expand...
Click to collapse
Thanks.
I replaced the fed cable as that's what I thought at first. Still same problem though.
Flashtools says phone is connected but debugging off so won't work.
danlat1415 said:
Thanks.
I replaced the fed cable as that's what I thought at first. Still same problem though.
Flashtools says phone is connected but debugging off so won't work.
Click to expand...
Click to collapse
If flashtool report that debugging is of that only means you are not in flash mode.
Can you enter fastboot mode? (press and hold search then plug usb)
If flashtool again report debugging is off, then that means you can't enter in fastboot mode either.
-Your keyboard don't work
-Flex cable from keyboard don't work
-Slider flex cable don't work. If you replaced it, do it again. If someone else replace it, claim your warranty and let him reopen and recheck flex slider cable
-Again, as your screen don't work, it means either screen is broken, or (guess what?) flex cable is faulty
danlat1415 said:
Thanks.
I replaced the fed cable as that's what I thought at first. Still same problem though.
Flashtools says phone is connected but debugging off so won't work.
Click to expand...
Click to collapse
If PC Companion fails try this http://www.sonymobile.com/gb/tools/update-service/, I helped out quite a few people with this link. Hopefully it will help you.
Hello guys. I just got this Xperia Acro S with the red light when it is connected to the charger. The phone was working all right and then it suddenly went off. When it is connected to the wall charger (Samsung or Sony charger) it gives a red led for a while, depends on how long it was disconnected from the charger and then the led goes off. If I connect to the pc, I get SEMC Flash Device. I tried everything I saw in lots of forums and nothing helped. If I hold the Volume + with power button, I don't get any vibration, no matter how long I hold. The same thing with the Volume - and the same with the Volume + - and the power button together. If I connect to the pc, the red led will come on, then after a while it will go off and only then the pc sees the device as SEMC Flash. I tried to remove the battery and reconnected it, but still no results as well. The flashtool says For 2011 devices line, be sure you are not in MTP mode. SUS doesn't see the phone, but the PC companion behaves strangly. When it says connect the phone, I plug it in and then the Pc companion says: Please update Pc companion. When I check for latest version it tells me that is the latest one. It can't be an old version, because I just downloaded it from the sony website. If I launch the repair services, it says press volume down and connect usb. I did that but the phone keeps entering into SEMC Flash mode. Please help me out
I've looked around on several forums and it seems that this problem has been around for a while but every thread I see is for a rooted XPlay while mine isn't rooted or unlocked BL so I decided to make a thread
Problem:Woke up, pressed power button, phone vibrates, nothing.I've tried taking battery out and putting back in and it didn't work
I have tried charging it too but nothing
Status: No Root Access Locked BL
basically i can't find anything, I sent it to a repair shop but they called back and said that they can't identify the problem so I'm going round either tomorrow or later today to pick it up, I'll keep note of any methods and try them when i get the phone back
So has anyone got any idea of how to fix it or had a similar problem?
DopeAssSwagGuy said:
I've looked around on several forums and it seems that this problem has been around for a while but every thread I see is for a rooted XPlay while mine isn't rooted or unlocked BL so I decided to make a thread
Problem:Woke up, pressed power button, phone vibrates, nothing.I've tried taking battery out and putting back in and it didn't work
I have tried charging it too but nothing
Status: No Root Access Locked BL
basically i can't find anything, I sent it to a repair shop but they called back and said that they can't identify the problem so I'm going round either tomorrow or later today to pick it up, I'll keep note of any methods and try them when i get the phone back
So has anyone got any idea of how to fix it or had a similar problem?
Click to expand...
Click to collapse
Download and install Sony's PC Companion
Download and install flashtool ( flashtool.net )
Try to repair with PC Companion first
IF that doesn't work, start flashtool and connect phone in fastboot mode (power off, hold search button and plug in usb cable to pc). Flashtoolt should report that it is in fastboot mode.
If that doesn't work try as previous, but in flash mode (hold back button, then plug usb cable to pc)
If that doesn't work, connect phone to pc and start to power on. Does windows play sound of usb device connected? Look under device manager in windows is there any unknown item listed.
Bakisha said:
Download and install Sony's PC Companion
Download and install flashtool ( flashtool.net )
Try to repair with PC Companion first
IF that doesn't work, start flashtool and connect phone in fastboot mode (power off, hold search button and plug in usb cable to pc). Flashtoolt should report that it is in fastboot mode.
If that doesn't work try as previous, but in flash mode (hold back button, then plug usb cable to pc)
If that doesn't work, connect phone to pc and start to power on. Does windows play sound of usb device connected? Look under device manager in windows is there any unknown item listed.
Click to expand...
Click to collapse
I guessing i dont need root or an Unlocked BL for flashtool?
But I do have a problem, I think my usb cable is busted as its gone a bit wierd so i will have to wait longer to try these out.
Bakisha said:
Download and install Sony's PC Companion
Download and install flashtool ( flashtool.net )
Try to repair with PC Companion first
IF that doesn't work, start flashtool and connect phone in fastboot mode (power off, hold search button and plug in usb cable to pc). Flashtoolt should report that it is in fastboot mode.
If that doesn't work try as previous, but in flash mode (hold back button, then plug usb cable to pc)
If that doesn't work, connect phone to pc and start to power on. Does windows play sound of usb device connected? Look under device manager in windows is there any unknown item listed.
Click to expand...
Click to collapse
HMM excuse me . i try as you said . that fastboot mode by pressing the search key . and it work .[i having same problem]
here the story of my problem : http://forum.xda-developers.com/xperia-play/help/how-to-recover-xperia-play-fail-custom-t2814347
hmm ... then what i must do to make it live back .. T.T
Hi guys,
My C1905 stopped working yesterday. When I'am trying to turn it on by pressing power button, it vibrates once and screen remains black. I tried to repair it using PC Companion. I can't, when i'm entering flashmode, pressing Volume Down and then connecting device to PC, LED becomes green but PC can't recognize my phone. I'm trying this also using Flashtool. The same effect. Bootloader is locked, i've never modified my ROM. Fastboot is working.
kobas said:
Hi guys,
My C1905 stopped working yesterday. When I'am trying to turn it on by pressing power button, it vibrates once and screen remains black. I tried to repair it using PC Companion. I can't, when i'm entering flashmode, pressing Volume Down and then connecting device to PC, LED becomes green but PC can't recognize my phone. I'm trying this also using Flashtool. The same effect. Bootloader is locked, i've never modified my ROM. Fastboot is working.
Click to expand...
Click to collapse
At first make sure you have installed flashtool drivers.
remove the battery & wait for 1 min then insert. open flashtool selct flashmode select ftf file. wait it will ask you to connect your mobile to pc. Then Connect your mobile to pc while pressing the volume down button. thats all.
TUTORIAL - http://forum.xda-developers.com/showthread.php?t=2697277
Video Tutorial - https://www.youtube.com/watch?v=YsPtdooarJk
Sureshtuty said:
At first make sure you have installed flashtool drivers.
remove the battery & wait for 1 min then insert. open flashtool selct flashmode select ftf file. wait it will ask you to connect your mobile to pc. Then Connect your mobile to pc while pressing the volume down button. thats all.
TUTORIAL - http://forum.xda-developers.com/showthread.php?t=2697277
Video Tutorial - https://www.youtube.com/watch?v=YsPtdooarJk
Click to expand...
Click to collapse
I did every step. Neither PC companion, nor flashtool detects my phone in flashmode. Ive installed drivers, charged battery etc. It did not worked. Can i flash using fastboot?
kobas said:
I did every step. Neither PC companion, nor flashtool detects my phone in flashmode. Ive installed drivers, charged battery etc. It did not worked. Can i flash using fastboot?
Click to expand...
Click to collapse
if the notification light is not turning at all than your phone is as good as a dummy
B_D_BATMAN said:
if the notification light is not turning at all than your phone is as good as a dummy
Click to expand...
Click to collapse
Alter connecting to PC, the light becomes red for about one second or less, then turns into green and stays that way, even if i disconnect my phone, light keeps staying green untill i remove bariery.
your device is not hard bricked. because it is vibrating & led is working. you can solve the problem by flashing ftf with flashtool. try again in another pc
Sureshtuty said:
your device is not hard bricked. because it is vibrating & led is working. you can solve the problem by flashing ftf with flashtool. try again in another pc
Click to expand...
Click to collapse
now my PC detects it as ZEUS Flash Device. LED stopped ligthing. Vibrations after turining the device on stopped also. What happened? I did completely nothing.