Xperia Acro S red led SEMC Flash - Sony Xperia S, Acro S, Ion

Hello guys. I just got this Xperia Acro S with the red light when it is connected to the charger. The phone was working all right and then it suddenly went off. When it is connected to the wall charger (Samsung or Sony charger) it gives a red led for a while, depends on how long it was disconnected from the charger and then the led goes off. If I connect to the pc, I get SEMC Flash Device. I tried everything I saw in lots of forums and nothing helped. If I hold the Volume + with power button, I don't get any vibration, no matter how long I hold. The same thing with the Volume - and the same with the Volume + - and the power button together. If I connect to the pc, the red led will come on, then after a while it will go off and only then the pc sees the device as SEMC Flash. I tried to remove the battery and reconnected it, but still no results as well. The flashtool says For 2011 devices line, be sure you are not in MTP mode. SUS doesn't see the phone, but the PC companion behaves strangly. When it says connect the phone, I plug it in and then the Pc companion says: Please update Pc companion. When I check for latest version it tells me that is the latest one. It can't be an old version, because I just downloaded it from the sony website. If I launch the repair services, it says press volume down and connect usb. I did that but the phone keeps entering into SEMC Flash mode. Please help me out

Related

[Q] Xperia S - red led

Hello sorry my english is bad. I got problem with my phone. Phone dont turn on, when i connect to wall charger or pc only red led turn on. Pc see phone as semc usb device. When a try to flash with flashtool only this show device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode how i can turn on debugging usb when i cant run the phone. Seus dont see phone. Please help.:crying:
Try this method
If it helps you then thank me
First off everything remove the SIM card and let the phone rest for five minutes and put the SIM and
Press the power button and volume up button at the same time for little long time your phone wil start as normal
Some times **** happens bro
Sent from my LT26i using xda app-developers app
Dont work for me
lukasz8504 said:
Hello sorry my english is bad. I got problem with my phone. Phone dont turn on, when i connect to wall charger or pc only red led turn on. Pc see phone as semc usb device. When a try to flash with flashtool only this show device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode how i can turn on debugging usb when i cant run the phone. Seus dont see phone. Please help.:crying:
Click to expand...
Click to collapse
Connect in flashtool, relock bootloader. Use seus to install fresh fw.
lukasz8504 said:
Dont work for me
Click to expand...
Click to collapse
Ok i find this tread http://forum.xda-developers.com/showthread.php?t=1527159 but when i try to enter flashmode i see this message device conected with usb debugging off for 2011 devices line be sure you are not in mtp mode
Try to use a different charger. I got the same bug with a sola . It worked with a samsung wallcharger. The sola was not loading with the sony charger when i turned it of. Other's reported this bug when phone turns off because of empty battery.
I try charger from se x10, xperia s, iphone 3gs and zte blade and nothing change still red led and after few minute red turn off and then pc see phone but in flashtool only this message device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode
lukasz8504 said:
I try charger from se x10, xperia s, iphone 3gs and zte blade and nothing change still red led and after few minute red turn off and then pc see phone but in flashtool only this message device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode
Click to expand...
Click to collapse
I think your phone hard bricked !
In this situation if you couldn't reset your phone by holding power+volume up till it 3 times vibrate , try power+volume down when you connected to pc sometimes it reset your phone.
try power+volume up when you plugged in wall charger till 3 times vibrate ( in some situations it happens after 30 second you hold both.
If none on this reset your phone , its only way that you send it to repare service of sony to re write your bootloader by JTAG box. I had the same problem when I install an improper kernel and I search all of net and try all thing I found but after 2 week I can't solve the problem and only way to back your phone to work is, re writing your bootloader by JTAG box
Anybody can help? maybe trim area problem??
that happened to me once. I removed the battery, connected the wall charger, and then put the battery back. It was the last thing I tried and it worked.
(Yes, I had to open the phone, so I don't have warranty)
waiflih said:
that happened to me once. I removed the battery, connected the wall charger, and then put the battery back. It was the last thing I tried and it worked.
(Yes, I had to open the phone, so I don't have warranty)
Click to expand...
Click to collapse
I try this and red led blink now
Can you now plug in to pc holding volume down to get flash mode though?
Sent from my LT26i using Tapatalk 2
When i connect to pc with volume down in flashtool see for devices 2011... mtp mode, device manager show semc flash device and somthing new sony ericsson seehcri control device
Does the led stop going red then?
Sent from my LT26i using Tapatalk 2
Yes when connect to pc red led turn off, flashtool see phono but not in flashmode
Did you repaired it bro
No my phone is in second service and i must wait. I find possible solution but cant try it. http://forum.xda-developers.com/showthread.php?t=1910029
Are you sure you're connecting.phone to PC in flashmode? (holding down the volume button while plugging in the phone)
Good luck there then
lukasz8504 said:
Hello sorry my english is bad. I got problem with my phone. Phone dont turn on, when i connect to wall charger or pc only red led turn on. Pc see phone as semc usb device. When a try to flash with flashtool only this show device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode how i can turn on debugging usb when i cant run the phone. Seus dont see phone. Please help.:crying:
Click to expand...
Click to collapse
I had this pr0blem but s0lved it ..!!"
Jxt remove y0ur sim card wait f0r 10 sec0ndz Then v0lume up + P0wer f0r 5 sec0ndz and the ph0ne will vibrate 3 times after that release butt0nz n p0wer 0n the device d0nt plug in the charger then it will turn 0n and say shutting d0wn and after when it shut down plug it ........ Pr0b s0lved

[HARD BRICK] can't get in CWM or turn off sony xperia S LT26i

Hello guys, I have a Xperia S LT26i in the Italian official version of software 6.1.a.2.55 rooted by E-Root v1.0.14 ( locked bootloader )
i wiped battery stats (after wiping data...cache ...all what we can wipe, mount and unmount every thing from the clockworkmod )
i reboot the mobile from the recovery then it crash in the Sony logo it crashes in the sony logo which stays a long time i forced restart by pressing Power button+volume(+) ( tried one viration and three vibrations )
Then the sony logo appeared and won't go away.. I cant boot anything. doesnt respond to hard reset (3 vibrates)
PC wont recognize my phone.
then the same thing happened until nothing displays on the screen and the notification led litghs red lights red when I connect with pc or AC power
then the mobile doesn't turn on or start on recovery mode again and is not recognized by Windows on Flashtool or on the SEUS
i tried to remove/insert battery, waiting to battery drain, charging the mobile without results
what should I do?
hold vol - when phone is powered off and connect usb cable (led should become green), than use flashtool to reflash any stock ROM
aiola1982 said:
hold vol - when phone is powered off and connect usb cable (led should become green), than use flashtool to reflash any stock ROM
Click to expand...
Click to collapse
When I hold vol(-), connect the phone to pc led become red most times and once in a way it become green for a short time then comeback to red not the time to do a full repair sony update Service or full flash with flashtool i did a successfull repair with the Sony update Service but stopped in the middle and then continued they said that's the phone is repaired successfully but i still have the problem ( won't turn on won't start recovery )
Can you try with another cable? Maybe the one you used is damaged. The phone normaly doesn't exit flashmode when recovery / repair is started.
If this doesn't help give it a try with newest flashtool, get a ftf file for stock fw .55 or any other version you want (would prefer any ICS version). Prepare everything in flashtool until you're told to connect the phone in flashmode than do so ( hold vol(-) ..., or do a soft reset and hold vol (-) with connected usb cable. If your phone enters flashmode (green led), flashtool should start flashing immediately.

Fastboot mode don't work on my Acro S

Hi,
I can't get into fastboot mode on my Sony Acro S. I hold the volume up button and then insert the USB cable. The blue led light up and everything seams to be ok but after some seconds the led get dark and the phone shows the Sony logo. The computer recognize the phone and the device manager shows an unknown device but It disapear after a while...
Anyone that have seen this before and maybe have a solution?
//Robert
That means your computers system is unable to install essential fastboot drivers for your phone. Try alternative USB ports.
If still it doesn't work then try it on another system. Also have a look on this,
http://forum.xda-developers.com/showthread.php?t=2447319

[Q] xperia play r800i USB port dont work

hi ppl
usb not recognize, not even the "unknow device" just like nothing conected. only logo "sonyericson" show. if use hot keys to flash mode or fastboot mode, the phone stay stuck in a blackscreen and a green light or blue light in the power button, depending what condition u start.
used flashtools, and pc companion tryin to fix, but not work if no usb is detected.

How to recover a hard bricked Xperia XA1 G3112

Could anyone please help me recovery my hard bricked Xperia XA1 G3112. because I flashed boot image but it went bad
Bootloader is unlocked.
USB Debuggung is on.
The phone can't go to fastboot neither flash mode. no vibration. no blue LED. no green LED.
When connecting the phone to the computer steady red LED go on with sound from the computer detecting a device then disconnect sound every 30 second then reconnected and so on...
on device manager it shows: USB Serial Device COM3.
on flash tool it shows: Device connected with USB debugging off , For 2011 devices line, be sure you are not in MTP mode.
I removed the back cover disconnected the battery then reconnected it then tried to go to fastboot/falsh mode but it didn't go.
I really appreciate any suggestions/help
Please anyone help is the phone completely dead or there's any chance to recover it. only if I could put it in flash mode or fastboot mode will be great
Good evening, I'm living the same thing. In my case, it's the XA1 G3123, but the problem it's the same. The only thing I could see was the red led...
I've tried Emma, Flashtool, Xperia Companion, and none of them recognized the device. Do you know if Is there any software that see a device aparently dead?
Adriano2015 said:
Good evening, I'm living the same thing. In my case, it's the XA1 G3123, but the problem it's the same. The only thing I could see was the red led...
I've tried Emma, Flashtool, Xperia Companion, and none of them recognized the device. Do you know if Is there any software that see a device aparently dead?
Click to expand...
Click to collapse
It's sad that this forum has 4 billion members and no one could help ? I wished that if someone on this forum could confirm that the phone is completely dead or what?
Anyway. I bought a new iPhone and that android junk is still in the drawer ?
First, make sure you have the drivers (flashtool and fastboot) installed.
Then download the ROM corresponding to your XA1, it can be by Flashtool or Xperifirm.
Also have at least 20% battery.
With all of this, with XA1 turned off, open Flashtool,
click the lightning button,
choose Flashmode,
select the downloaded ROM (ftf),
click Flash,
as soon as Flashtool prompts you connect to the PC by pressing the volume button at the same time
(can not remember if it is volume - or volume +, the important thing is that the notification light turns green)
and wait for the process to finish.
It works most of the time.
boyrock said:
First, make sure you have the drivers (flashtool and fastboot) installed.
Then download the ROM corresponding to your XA1, it can be by Flashtool or Xperifirm.
Also have at least 20% battery.
With all of this, with XA1 turned off, open Flashtool,
click the lightning button,
choose Flashmode,
select the downloaded ROM (ftf),
click Flash,
as soon as Flashtool prompts you connect to the PC by pressing the volume button at the same time
(can not remember if it is volume - or volume +, the important thing is that the notification light turns green)
and wait for the process to finish.
It works most of the time.
Click to expand...
Click to collapse
Thanks for the instruction. I did this . but it didn't work, when I press flash a window pops up showing animated "press volume downd and connect your phone to the PC but when I do that nothing happens. the LED light stays red when connection the USB cable. it does not go to flash mode.
I had also tried volume up but that didn't works either.
the phone seems not able to go to flash mode neither fastboot mode.
I also tried removing the battery, press volume down , connect the usb cable then connect the battery back but didn't works.
I tried pressing both volume up and down then connect the usb cable with the battery connected and disconnected but that didn't work either.
I have tried so many combinations buttons with battery in and out. but didn't work.
there's always steady red LED on when connecting the usb cable to pc or to the charger.
I checked all drivers installed correctly. but the problem is the phone does not go to fastboot neither flash mode.
I also don't know more what to do, because none of the buttons or its combinations result in something beyond the same red led. I've installed the usb vcom preload drivers, MTK 67xx drivers and I also tried to desconect the battery and once again changes nothing.
The only thing that happens is the device connecting and disconnecting every 30 seconds in the hardware manager, and no programms or flashers like Flash Tool recognize the smartphone.
If anyone could give any ideas would be helpful, considering my knowledge in cell phones hardware is very low.
https://developer.sony.com/develop/open-devices/get-started/flash-tool/
hld power and vol up, device vibration once, keep holding, release buttons when vibrated three times
phone shut down, no more led
plug usb in pc, not mobile, hold volume down and plug in mobile too after you launched emma
https://developer.sony.com/develop/open-devices/get-started/flash-tool/
emma will detect your device in flashmode and offer you a rom to download and flash, problem solved
maybe not the latest rom for your country but the most common for the device to unbrick
did u find any solution
kosrat-kj said:
did u find any solution
Click to expand...
Click to collapse
Nope.
albertineso said:
Could anyone please help me recovery my hard bricked Xperia XA1 G3112. because I flashed boot image but it went bad
Bootloader is unlocked.
USB Debuggung is on.
The phone can't go to fastboot neither flash mode. no vibration. no blue LED. no green LED.
When connecting the phone to the computer steady red LED go on with sound from the computer detecting a device then disconnect sound every 30 second then reconnected and so on...
on device manager it shows: USB Serial Device COM3.
on flash tool it shows: Device connected with USB debugging off , For 2011 devices line, be sure you are not in MTP mode.
I removed the back cover disconnected the battery then reconnected it then tried to go to fastboot/falsh mode but it didn't go.
I really appreciate any suggestions/help
Click to expand...
Click to collapse
I think that is a battery problem... i'm not sure
MCGARCI88 said:
I think that is a battery problem... i'm not sure
Click to expand...
Click to collapse
Hi,
No, it's not a battery problem, don't change it, that's not the solution... I have the same problem with my XA1 G3121, and I buy a new battery the last week, but nothing change, my phone is always blocked ... the red light stay red when i connect the phone to the PC (or when I connect it to the charger), and directly off when i disconnect it, but the problem stay the same,I can't change the red light in green or blue...
Sorry for my poor English, I'm french and I know sometimes it's difficult to understand my english...
I will see if I can test the Test point because it's the last than I don't test to ressucite my XA1.
If you find a solution to ressucite it, please write me how you do please...
luluberlu81 said:
Hi,
No, it's not a battery problem, don't change it, that's not the solution... I have the same problem with my XA1 G3121, and I buy a new battery the last week, but nothing change, my phone is always blocked ... the red light stay red when i connect the phone to the PC (or when I connect it to the charger), and directly off when i disconnect it, but the problem stay the same,I can't change the red light in green or blue...
Sorry for my poor English, I'm french and I know sometimes it's difficult to understand my english...
I will see if I can test the Test point because it's the last than I don't test to ressucite my XA1.
If you find a solution to ressucite it, please write me how you do please...
Click to expand...
Click to collapse
The sony mobiles are comlicated, i had a xperia z1 with the same issue, and I couldn't fix it, now I have a z5 compact with broken screen, I replaced the screen, and the backlight stopped working... don't worry my english is poor too, i'm spanish
HI!
Another one with same problem! Xperia Xa1 g3123 dead, red led.
During flashing there where a problem (didnĀ“t screenshoot, so, i dont know which one) now, its dead!
I found this guide for z ultra and z1 in this forum. But im not sure it will works with mine.
https://forum.xda-developers.com/showthread.php?t=2646405
luluberlu81 said:
Hi,
No, it's not a battery problem, don't change it, that's not the solution... I have the same problem with my XA1 G3121, and I buy a new battery the last week, but nothing change, my phone is always blocked ... the red light stay red when i connect the phone to the PC (or when I connect it to the charger), and directly off when i disconnect it, but the problem stay the same,I can't change the red light in green or blue...
Sorry for my poor English, I'm french and I know sometimes it's difficult to understand my english...
I will see if I can test the Test point because it's the last than I don't test to ressucite my XA1.
If you find a solution to ressucite it, please write me how you do please...
Click to expand...
Click to collapse
please I've gotten the same problem with my xa1 g3121 too, please were you able to revive your phone...?
Needs help....
Adriano2015 said:
Good evening, I'm living the same thing. In my case, it's the XA1 G3123, but the problem it's the same. The only thing I could see was the red led...
I've tried Emma, Flashtool, Xperia Companion, and none of them recognized the device. Do you know if Is there any software that see a device aparently dead?
Click to expand...
Click to collapse
Same problem here, g3121 totally dead, red light only, nothing else...
tried everything but no avail....
boyrock said:
First, make sure you have the drivers (flashtool and fastboot) installed.
Then download the ROM corresponding to your XA1, it can be by Flashtool or Xperifirm.
Also have at least 20% battery.
With all of this, with XA1 turned off, open Flashtool,
click the lightning button,
choose Flashmode,
select the downloaded ROM (ftf),
click Flash,
as soon as Flashtool prompts you connect to the PC by pressing the volume button at the same time
(can not remember if it is volume - or volume +, the important thing is that the notification light turns green)
and wait for the process to finish.
It works most of the time.
Click to expand...
Click to collapse
i am a newbie. my xperia xa1 lost connection while updating to oreo 8.0. now it has a black screen. when charged or connected to the computer the xa1 has the red light turning but still black screen. i downloaded the latest flashtool and the stock firmware for G3116 but flashtool is saying that there are no drivers loaded.
17/047/2020 20:47:18 - INFO - Flashtool 0.9.31.0
17/047/2020 20:47:18 - INFO - Searching for a web proxy
17/047/2020 20:47:18 - INFO - No proxy found, using direct connection
17/047/2020 20:47:19 - INFO - Loading devices database
17/047/2020 20:47:20 - INFO - Loaded 129 devices
17/047/2020 20:47:20 - INFO - Starting phone detection
17/047/2020 20:47:22 - INFO - Device disconnected
17/047/2020 20:47:40 - INFO - List of connected devices (Device Id) :
17/047/2020 20:47:40 - INFO - List of ADB devices :
17/047/2020 20:47:44 - INFO - - none
17/047/2020 20:47:44 - INFO - List of fastboot devices :
17/047/2020 20:47:44 - INFO - - none
i alreaady installed fastboot but the phone is still not detected by flashtool, emma and companion. what are the drivers for the xa1 inside the flashtool driver package folder?
both in emma and companion are saying that my phone is locked out.
please help me.
XA1 Drivers for Flashtool
boyrock said:
First, make sure you have the drivers (flashtool and fastboot) installed.
Then download the ROM corresponding to your XA1, it can be by Flashtool or Xperifirm.
Also have at least 20% battery.
With all of this, with XA1 turned off, open Flashtool,
click the lightning button,
choose Flashmode,
select the downloaded ROM (ftf),
click Flash,
as soon as Flashtool prompts you connect to the PC by pressing the volume button at the same time
(can not remember if it is volume - or volume +, the important thing is that the notification light turns green)
and wait for the process to finish.
It works most of the time.
Click to expand...
Click to collapse
i am a newbie. my xperia xa1 lost connection while updating to oreo 8.0. now it has a black screen. when charged or connected to the computer the xa1 has the red light turning but still black screen. i downloaded the latest flashtool and the stock firmware for G3116 but flashtool is saying that there are no drivers loaded.
17/047/2020 20:47:18 - INFO - Flashtool 0.9.31.0
17/047/2020 20:47:18 - INFO - Searching for a web proxy
17/047/2020 20:47:18 - INFO - No proxy found, using direct connection
17/047/2020 20:47:19 - INFO - Loading devices database
17/047/2020 20:47:20 - INFO - Loaded 129 devices
17/047/2020 20:47:20 - INFO - Starting phone detection
17/047/2020 20:47:22 - INFO - Device disconnected
17/047/2020 20:47:40 - INFO - List of connected devices (Device Id) :
17/047/2020 20:47:40 - INFO - List of ADB devices :
17/047/2020 20:47:44 - INFO - - none
17/047/2020 20:47:44 - INFO - List of fastboot devices :
17/047/2020 20:47:44 - INFO - - none
i alreaady installed fastboot but the phone is still not detected by flashtool, emma and companion. what are the drivers for the xa1 inside the flashtool driver package folder?
both in emma and companion are saying that my phone is locked out.
please help me.
I know this is a old thread but people you must understand, what happened is that your Sony phone disconnected while flashing the boot.img (so now the phone has no software at all! ) No rom is easy fix, but no bootloader (boot.img) you are sol
These phones have a tendency to do this if you chose the wrong settings before flashing.
So basically you have a lifeless brick (the phone doesn't know it's a phone) that's why it doesn't do nothing but have a red light, the only FIX is JTAG jtagging the device or to swapp the motherboard i have a xa1 ultra from 2018 i bricked, 4 years later i bought a motherboard and swapped it and voila back up and running.
So please flash and root responsibly most soft bricked can be fixed but when you delete the boot.img, only JTAG can save you good luck!!

Categories

Resources