[Q] Flashtool not get into flashmode - Xperia Arc Q&A, Help & Troubleshooting

I've tried to flash "LT15_LT18_70_Baseband.ftf" on Arc phone using flashtool 8.0.0 x64, flashtoox64.exe.
I pressed flash button and check flashmod and OK, select "LT15_LT18_70_Baseband.ftf" and selected all sins and ok. Then I got usb connection guide screen and I plugged usb in arc as described at usb connection guide screen.
But the "usb connection guide screen" didn't disappear and I got these logs at flashtool application.
Please connect your device into flashmode.
- Device connected in fastboot mode
INFO - List of connected devices (Device Id) :
INFO - - USB\VID_0FCE&PID_0DDE\CB5A1FWGV2&ZLP Driver installed : true
INFO - List of ADB devices :
INFO - - none
INFO - List of fastboot devices :
INFO - - none
INFO - Device disconnected
And I tried usb connection with "flash.exe", then I got this attached picture, and still the "usb connection guide screen" didn't disappear as shown in the attached picture.
Please let me know how to connect my arc phone into flashmode.
Thanks in advance.

Have you put it in flash mode? I.e. Turn off the phone hold the menu button then connect the USB?
Sent from my LT18i using XDA

No, I pressed "Back" button as described at flashtool.

comocandle said:
No, I pressed "Back" button as described at flashtool.
Click to expand...
Click to collapse
Press and hold.

Yes, I pressed and holding "Back" button I plugged usb.
But still flashtool shows "INFO - Device connected in fastboot mode".

Phone should be in Mass Storage Mode (MSC) and you need to switch off your phone. Press and hold Back when flashtool tells you to do so, plug in the USB and release Back only when instructed.

xtacy!/ Yes, I checked MSC, and pressed and hold "Back" button when the guide picture appear.
I also tried at safe with networking, but same result.
" INFO - Device connected in fastboot mode "
This log was loaded.

Try using Media Transfer mode.. To be honest, i never used MSC mode in my lifetime while flashing with FT and has always been in MT mode..
Sent from my LT15i using XDA

Same here. I've never really used MSC mode. I prefer MTP. But the instructions say to use the former. Oh well.
Swyped from my SE Xperia arc (LT15i) using Tapatalk 2

gire.prasad/ Thanks.
I changed twice, then it works.

If it tells you you're on Fastboot mode, then it's not the correct key you're holding. If it needs flashmode, your led should turn green, if it turns blue, it's on Fastboot mode.
You can try this by powering off your phone and trying holding down keys until the green led is on. (Dunno which one is for Arc, I have a Pro).

Related

[Q]Flashmode with Xperia Play 800a

Hi, I was wondering if my phone is capable of entering flash mode.
I have a Xperia Play 800a phone, from Rogers
Additional Info:
Tried Gingerbreak initially to root, not knowing it wouldn't work
Moved on to FlashTools, to attempt flashmode
Then to Root MANY ANDROID! [Upd: 20.09.2012].
Afterwards, I think the option to root (zergRush) using Flashtools got enabled, clicked that, phone got rooted
Busy Box v1.19.0 installed
Android version: 2.3.4
Build number: 4.0.2.A.0.42
Baseband: -56
Kernel: 2.6.32.9.-perf
Root Access Allowed
Using FlashTools:
I've read multiple threads of how to get into flash mode (Unplug your device, power off the device, hold back button or home button (also tried pressing button consistently), I've tried pretty much every button, and then plugged in the USB cable. I even took my battery out for 5-10 seconds, still no luck.
Once I plug my USB cable back in to my phone, while still holding back button or search button, the Sony Ericsson screen pops up, I get a dundun sound from the PC, then my light turns green and the phone begins charging, no flashing/action from FlashTools begins.
This is the message I received from FlashTools
28/022/2012 17:22:09 - INFO - Device disconnected
28/027/2012 17:27:36 - INFO - Device connected with USB debugging off
28/027/2012 17:27:36 - INFO - For 2011 devices line, be sure you are not in MTP mode
Another method I attempted was going into SDK tools folder, opening cmd in the platforms-tools, using the command "adb reboot-bootloader" and it just restarts my phone normally.
fastboot commands don't work either
I've checked my phone to make sure I'm in Mass storage mode, and USB Debugging is enabled.
I visited this site as well http://unlockbootloader.sonymobile.com/instructions
Entered this number into my phone
*#*#7378423#*#*
Looked under Configuration
Rooting status: Bootloader unlock allowed: No
Could this possibly mean phone isn't able to enter flashmode?
Greed2k said:
Hi, I was wondering if my phone is capable of entering flash mode.
I have a Xperia Play 800a phone, from Rogers
Additional Info:
Tried Gingerbreak initially to root, not knowing it wouldn't work
Moved on to FlashTools, to attempt flashmode
Then to Root MANY ANDROID! [Upd: 20.09.2012].
Afterwards, I think the option to root (zergRush) using Flashtools got enabled, clicked that, phone got rooted
Busy Box v1.19.0 installed
Android version: 2.3.4
Build number: 4.0.2.A.0.42
Baseband: -56
Kernel: 2.6.32.9.-perf
Root Access Allowed
Using FlashTools:
I've read multiple threads of how to get into flash mode (Unplug your device, power off the device, hold back button or home button (also tried pressing button consistently), I've tried pretty much every button, and then plugged in the USB cable. I even took my battery out for 5-10 seconds, still no luck.
Once I plug my USB cable back in to my phone, while still holding back button or search button, the Sony Ericsson screen pops up, I get a dundun sound from the PC, then my light turns green and the phone begins charging, no flashing/action from FlashTools begins.
This is the message I received from FlashTools
28/022/2012 17:22:09 - INFO - Device disconnected
28/027/2012 17:27:36 - INFO - Device connected with USB debugging off
28/027/2012 17:27:36 - INFO - For 2011 devices line, be sure you are not in MTP mode
Another method I attempted was going into SDK tools folder, opening cmd in the platforms-tools, using the command "adb reboot-bootloader" and it just restarts my phone normally.
fastboot commands don't work either
I've checked my phone to make sure I'm in Mass storage mode, and USB Debugging is enabled.
I visited this site as well http://unlockbootloader.sonymobile.com/instructions
Entered this number into my phone
*#*#7378423#*#*
Looked under Configuration
Rooting status: Bootloader unlock allowed: No
Could this possibly mean phone isn't able to enter flashmode?
Click to expand...
Click to collapse
Im assuming you have the xperia play drivers installed. You can enter flashmode but you cant enter fastboot mode thats disabled because your bootloader is locked. To enter flashmode power off your xperia play (without removing the battery). As soon as your xperia play is off press and hold the back button and connect the usb cable to the pc before the xperia play boots up. If you look at the power button it should have the color green=flashmode thats what you should be looking for. Blue is fastboot mode these are indicators what mode your xperia play is in. You need green for flashmode.
chery2k said:
Im assuming you have the xperia play drivers installed. You can enter flashmode but you cant enter fastboot mode thats disabled because your bootloader is locked. To enter flashmode power off your xperia play (without removing the battery). As soon as your xperia play is off press and hold the back button and connect the usb cable to the pc before the xperia play boots up. If you look at the power button it should have the color green=flashmode thats what you should be looking for. Blue is fastboot mode these are indicators what mode your xperia play is in. You need green for flashmode.
Click to expand...
Click to collapse
When you say Xperia play drivers, what exactly are you referring to?
And yes I do follow those steps of turning off the phone, and holding the back button, and plugging the USB cable. The light still stays green, no matter what I do.
Maybe I'm missing those Xperia play drivers?
Greed2k said:
When you say Xperia play drivers, what exactly are you referring to?
And yes I do follow those steps of turning off the phone, and holding the back button, and plugging the USB cable. The light still stays green, no matter what I do.
Maybe I'm missing those Xperia play drivers?
Click to expand...
Click to collapse
U need to turn on usb debugging and allow unknown sources. settings-applications- there both in there i think it is and u can still get ur bootloader unlocked. U just gotta pay for it
Sent from my GT-I9300
wedgess said:
U need to turn on usb debugging and allow unknown sources. settings-applications- there both in there i think it is and u can still get ur bootloader unlocked. U just gotta pay for it
Sent from my GT-I9300
Click to expand...
Click to collapse
Yeah, USB debugging and allow unknown sources are ticked off, I guess I'll have to pay for it if I want it unlocked -__-
Thanks for the help though
No, u gotta tick them ON for flashtool to work.
Nothing to do with bootloaders.
CyberScopes said:
No, u gotta tick them ON for flashtool to work.
Nothing to do with bootloaders.
Click to expand...
Click to collapse
I have a check mark in those boxes, sorry for the misunderstanding.

Select kernel to flash

Hello,
In flashtool, i can't select kernel to flash, when press home button, apears green led but apers this error and i cant do nothing. I have bootloader unlocked by Alessandrissimo.
17/019/2013 04:19:59 - INFO - Device disconnected
17/020/2013 04:20:03 - INFO - Device connected in flash mode
17/020/2013 04:20:05 - ERROR - This action can only be done in fastboot mode
17/020/2013 04:20:11 - ERROR - This action can only be done in fastboot mode
17/020/2013 04:20:12 - ERROR - This action can only be done in fastboot mode
17/020/2013 04:20:16 - INFO - Finished Fastboot Toolbox
17/020/2013 04:20:44 - INFO - Device disconnected
17/021/2013 04:21:01 - INFO - Device connected with USB debugging off
17/021/2013 04:21:01 - INFO - For 2011 devices line, be sure you are not in MTP mode
Help please
Put your phone into fastboot mode (blue LED). Only then you can install custom kernel.
Sent from LT18i with custom firmware by myself.
Click and hold menu button while conecting USB cable into computer
Sent from Arc S using XDA Premium
Yes but only appears the green light when i click in menu =S
Punk44 said:
Yes but only appears the green light when i click in menu =S
Click to expand...
Click to collapse
Did you HOLD on the menu key while plugging in the usb connector to the pc??
Turn off your phone, connect USB to your PC, hold down Menu button, then connect cable to your phone.

[Q] Help! My screen wont turn on and it phone only virbrates

Hey everyone i kinda fixed my power problem, i'm currently using a small pin to turn my phone on but now i have another problem. My phone only vibrates and then the screen does nothing. Like i said i have only just put a new flex cable in. Also when i plug my phone into a laptop, it keeps connections and disconnected. CAN ANYONE HELP? The phone will power on but nothing happens with the screen and it wont stay connected to the computer
Download flashtool and when you have downloaded flashtool install the drivers in the flashtool folder and download a ftf file for your phone and put it in flashtool folder then firmwares then open flashtool and press the flash icon then press flashmode and select your ftf file then press flash then follow the instructions.
Sent from my R800i using xda app-developers app
FaiselW said:
Download flashtool and when you have downloaded flashtool install the drivers in the flashtool folder and download a ftf file for your phone and put it in flashtool folder then firmwares then open flashtool and press the flash icon then press flashmode and select your ftf file then press flash then follow the instructions.
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Thankyou for the comment but how can i do this when my phone wont stay connected to my computer?
Open flashtool and hold the back button while plugging in your phone and it should say phone connected in flash mode
Sent from my R800i using xda app-developers app
FaiselW said:
Open flashtool and hold the back button while plugging in your phone and it should say phone connected in flash mode
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Im trying this right now but nothing is happening, it is just telling me to unplug in and do the steps and thats it. Am i doing anything wrong? I have installed all the drivers and using a .ftf file. The phones screen is doing nothing and it has a orange light when the usb is plugged in.
Do not connect your phone then press the flash icon then select your ftf file then press flash and it will say preparing files for flashing you should then get a message showing up and press back while plugging in phone
Sent from my R800i using xda app-developers app
FaiselW said:
Do not connect your phone then press the flash icon then select your ftf file then press flash and it will say preparing files for flashing you should then get a message showing up and press back while plugging in phone
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
I have done all that, the last things it says on the log is this and then nothing happends
Preparing files for flashing
04/031/2013 18:31:14 - INFO - Please connect your device into flashmode.
04/032/2013 18:32:03 - INFO - Device connected with USB debugging off
04/032/2013 18:32:03 - INFO - For 2011 devices line, be sure you are not in MTP mode
Vinixdzn said:
Hey everyone i kinda fixed my power problem, i'm currently using a small pin to turn my phone on but now i have another problem. My phone only vibrates and then the screen does nothing. Like i said i have only just put a new flex cable in. Also when i plug my phone into a laptop, it keeps connections and disconnected. CAN ANYONE HELP? The phone will power on but nothing happens with the screen and it wont stay connected to the computer
Click to expand...
Click to collapse
I too had that problem once, it was because of the cable, i changed the data cable and the problem solved for me...
and for flashing FTF follow the tutorial by FMA965 here: http://forum.xda-developers.com/showthread.php?t=2054486
this tutorial is the easy one... and thank fma965
velan1 said:
I too had that problem once, it was because of the cable, i changed the data cable and the problem solved for me...
and for flashing FTF follow the tutorial by FMA965 here: http://forum.xda-developers.com/showthread.php?t=2054486
this tutorial is the easy one... and thank fma965
Click to expand...
Click to collapse
Thankyou but on the tut is says when you plug in the usb the LED light should be green but mines orange
Vinixdzn said:
Thankyou but on the tut is says when you plug in the usb the LED light should be green but mines orange
Click to expand...
Click to collapse
try remove the battery insert it again and connect holding the back button when it asks to connect ur phone to flash...
velan1 said:
try remove the battery insert it again and connect holding the back button when it asks to connect ur phone to flash...
Click to expand...
Click to collapse
I have done all that, this is the last thing that appears on the log
Preparing files for flashing
04/031/2013 18:31:14 - INFO - Please connect your device into flashmode.
04/032/2013 18:32:03 - INFO - Device connected with USB debugging off
04/032/2013 18:32:03 - INFO - For 2011 devices line, be sure you are not in MTP mode
Vinixdzn said:
I have done all that, this is the last thing that appears on the log
Preparing files for flashing
04/031/2013 18:31:14 - INFO - Please connect your device into flashmode.
04/032/2013 18:32:03 - INFO - Device connected with USB debugging off
04/032/2013 18:32:03 - INFO - For 2011 devices line, be sure you are not in MTP mode
Click to expand...
Click to collapse
that log will appear if you connect your phone turned on during the flash.
you may already know that you have switch off your mobile and connect to pc by holding back button to flash.
since it show this log it seems your phone is turned on, don't know your problem hope someone helps you...
velan1 said:
that log will appear if you connect your phone turned on during the flash.
you may already know that you have switch off your mobile and connect to pc by holding back button to flash.
since it show this log it seems your phone is turned on, don't know your problem hope someone helps you...
Click to expand...
Click to collapse
This is what it says, 04/031/2013 19:31:42 - INFO - Selected R800i / 4.0.2.A.0.62 / (1253-4437)
04/031/2013 19:31:42 - INFO - Preparing files for flashing
04/031/2013 19:31:45 - INFO - Please connect your device into flashmode.
04/032/2013 19:32:07 - INFO - Device connected with USB debugging off
04/032/2013 19:32:07 - INFO - For 2011 devices line, be sure you are not in MTP mode
velan1 said:
that log will appear if you connect your phone turned on during the flash.
you may already know that you have switch off your mobile and connect to pc by holding back button to flash.
since it show this log it seems your phone is turned on, don't know your problem hope someone helps you...
Click to expand...
Click to collapse
I think i know what the problem is, my debugging mode is not on, do you know how i can turn it on without using the phone?
Vinixdzn said:
I think i know what the problem is, my debugging mode is not on, do you know how i can turn it on without using the phone?
Click to expand...
Click to collapse
Debugging mode have nothing with your problem. It only means that you didn't entered in flashmode.
I think you have problem with flex cable, maybe you should reopen your Play and check flex cable again.
Try to hold search when plugining in phone, flashtool should report that you are in fastboot mode. If flashtool again report error (that "debugging not on") it means that maybe your keyboard is not working. Or flex. Or both.
But make sure you also try different usb cable and/or different usb port on motherboard (mainly back ports, sometime front ports can be jirky for unknown reason)
Bakisha said:
Debugging mode have nothing with your problem. It only means that you didn't entered in flashmode.
I think you have problem with flex cable, maybe you should reopen your Play and check flex cable again.
Try to hold search when plugining in phone, flashtool should report that you are in fastboot mode. If flashtool again report error (that "debugging not on") it means that maybe your keyboard is not working. Or flex. Or both.
But make sure you also try different usb cable and/or different usb port on motherboard (mainly back ports, sometime front ports can be jirky for unknown reason)
Click to expand...
Click to collapse
Cheers for the information, i have seen somewhere that when you plug in your usb into your phone, the LED colour should be green but mines orange atm and i have only recently just put a new flex cable in. My phone doesn't seem to be getting any better
Hold down back button while plugging in your phone
Sent from my R800i using xda app-developers app

[Q] xperia play r800i strangely bricked

my xperia play r800i wont boot, it show signs of charging e.g blinking red light, red light, amber light, green light but wont boot, when i remove the battery and re insert it it will vibrate and then nothing, not even the backlight turns on just a black screen, i cannot get it to go into fastboot mode strangely so i am unable to unlock the bootloader and therefore unable to flash it back to stock, if some-one could point me to a video guide on how to get it to go to fastboot mode. with the pc companion tool it first saw it as "null" device but after updating it to latest firmware through it it reconises it as an r800 xperia play yet i am unable to browse files at all on it. i have also re updated it through update service but again nothing. this phone is out of warranty so that isn't an option. if anyone could help it would be awesome.
spazmoid said:
my xperia play r800i wont boot, it show signs of charging e.g blinking red light, red light, amber light, green light but wont boot, when i remove the battery and re insert it it will vibrate and then nothing, not even the backlight turns on just a black screen, i cannot get it to go into fastboot mode strangely so i am unable to unlock the bootloader and therefore unable to flash it back to stock, if some-one could point me to a video guide on how to get it to go to fastboot mode. with the pc companion tool it first saw it as "null" device but after updating it to latest firmware through it it reconises it as an r800 xperia play yet i am unable to browse files at all on it. i have also re updated it through update service but again nothing. this phone is out of warranty so that isn't an option. if anyone could help it would be awesome.
Click to expand...
Click to collapse
just to be clear to put it into fast boot mode i have attempeted the following
remove battery, wait 5 seconds, reinsert battery, hold search and power simltaniously, nothing
remove battery, wait 5 seconds, reinsert battery, press power until vibration while holding search, nothing
remove battery, hold search, reinsert battery still holding search, hold power button while still holding search, nothing
remove battery, wait 5 seconds, reinsert battery, hold search, insert usb, begins charging... no blue light
it shows no sign of charging after i "turn it on" the light goes out but i know that the front plate, i.e screen,menu buttons is not completely unresponsive as if i hold the return button when i insert the usb it recognizes it different as i was trying to flash it earlyer and it is required in the updating process, please help
it seems if i leave it plugged in via usb it will randomly disconnect and reconnect from the computer and yes pc companion will say that the device is detected every time. its almost as if it is stuck in an invisible and very fast bootloop as it disconnects and reconnects at about 5 second intervals, this only happens after it has been "turned on"
it also appears that the battery drains very rapidly as after only a few minuets of removing battery holding power ect. it will no longer "turn on" and no light will turn on through a usb socket but when plugged into the wall after a short pause it shows the amber charging light. could this be a battery problem? con the xperia play normally boot off wall power without a battery? if so then it is the devices problem as mine cannot but if it cant normally then maybe its the battery, i have a new one ordered and will arive soon and i will keep you posted.
spazmoid said:
just to be clear to put it into fast boot mode i have attempeted the following
remove battery, wait 5 seconds, reinsert battery, hold search and power simltaniously, nothing
remove battery, wait 5 seconds, reinsert battery, press power until vibration while holding search, nothing
remove battery, hold search, reinsert battery still holding search, hold power button while still holding search, nothing
remove battery, wait 5 seconds, reinsert battery, hold search, insert usb, begins charging... no blue light
Click to expand...
Click to collapse
U can restore ur device with flashtools
U can download it from flashtool.net
After u downloaded flashtool and installed right drivers go here : http://forum.xda-developers.com/showthread.php?t=2184897
and download one of r800i .ftf file
Then turn off ur phone and hold back button and plugin usb power led should turn to green
After that open flashtools and click on flash button on top left then select flashmode and find ftf file and select flash
Sent from my R800i using xda premium
if its not clear it is acting extremely erratically with no clear logic but a few things are constant. no boot. no fastboot mode, charging light, pc companion recognizes it. have tried to be as detailed as possible so that someone may be able to pinpoint my problem.
raminta said:
U can restore ur device with flashtools
U can download it from flashtool.net
After u downloaded flashtool and installed right drivers go here : http://forum.xda-developers.com/showthread.php?t=2184897
and download one of r800i .ftf file
Then turn off ur phone and hold back button and plugin usb power led should turn to green
After that open flashtools and click on flash button on top left then select flashmode and find ftf file and select flash
Sent from my R800i using xda premium
Click to expand...
Click to collapse
i have installed "emma" and done as you said, it recognises my phone but also recognises that it is "locked" and points me towards the sony site where you unlock the boot-loader but i cannont follow the instructions there as i can not get it to go into fastboot mode.
spazmoid said:
i have installed "emma" and done as you said, it recognises my phone but also recognises that it is "locked" and points me towards the sony site where you unlock the boot-loader but i cannont follow the instructions there as i can not get it to go into fastboot mode.
Click to expand...
Click to collapse
If u use flashtool u can restore ur phone without unlocked bootloader because Flashmode doesn't require unlocked bootloader
Sent from my R800i using xda premium
raminta said:
If u use flashtool u can restore ur phone without unlocked bootloader because Flashmode doesn't require unlocked bootloader
Sent from my R800i using xda premium
Click to expand...
Click to collapse
could you plese link to a download as whenever i look for flashtools i just get emma
spazmoid said:
my xperia play r800i wont boot, it show signs of charging e.g blinking red light, red light, amber light, green light but wont boot, when i remove the battery and re insert it it will vibrate and then nothing, not even the backlight turns on just a black screen, i cannot get it to go into fastboot mode strangely so i am unable to unlock the bootloader and therefore unable to flash it back to stock, if some-one could point me to a video guide on how to get it to go to fastboot mode. with the pc companion tool it first saw it as "null" device but after updating it to latest firmware through it it reconises it as an r800 xperia play yet i am unable to browse files at all on it. i have also re updated it through update service but again nothing. this phone is out of warranty so that isn't an option. if anyone could help it would be awesome.
Click to expand...
Click to collapse
btw what you did with your device that it bricked like this
kks111 said:
btw what you did with your device that it bricked like this
Click to expand...
Click to collapse
nothing, thats the strange thing, i just put it on charge one day and then... poof, dead
I've got the exact same issue, but i know how you could get into flashmode or fastboot mode.
Pull the battery out and insert the usb cable (when connected to the Pc of course) and put the usb cable in the phone while holding either back or the search button. Nownit should be in the sepected mode
Gesendet von meinem Nexus 5 mit Tapatalk
Spatinator said:
I've got the exact same issue, but i know how you could get into flashmode or fastboot mode.
Pull the battery out and insert the usb cable (when connected to the Pc of course) and put the usb cable in the phone while holding either back or the search button. Nownit should be in the sepected mode
Gesendet von meinem Nexus 5 mit Tapatalk
Click to expand...
Click to collapse
thanks ill try that, does a blue light on the top come on in fastboot mode?
spazmoid said:
thanks ill try that, does a blue light on the top come on in fastboot mode?
Click to expand...
Click to collapse
that diddnt work as flashtool did not recognise it at all and nothing happend on the phone
plud when in flashmode flashtool failed because it said
checking headers
error
error-error flashing aborted
spazmoid said:
plud when in flashmode flashtool failed because it said
checking headers
error
error-error flashing aborted
Click to expand...
Click to collapse
the exact text was
04/010/2014 18:10:34 - INFO - Device connected in flash mode
04/011/2014 18:11:03 - INFO - Selected null
04/011/2014 18:11:03 - INFO - Flash canceled
04/018/2014 18:18:32 - INFO - Device disconnected
04/020/2014 18:20:47 - INFO - Device connected with USB debugging off
04/020/2014 18:20:47 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/020/2014 18:20:59 - INFO - Device disconnected
04/022/2014 18:22:33 - INFO - Device connected in flash mode
04/023/2014 18:23:28 - INFO - Selected Bundle for Xperia Play. FW release : Release. Customization : Generic UK
04/023/2014 18:23:28 - INFO - Preparing files for flashing
04/023/2014 18:23:28 - INFO - Please connect your device into flashmode.
04/023/2014 18:23:29 - INFO - Opening device for R/W
04/023/2014 18:23:29 - INFO - Device connected in flash mode
04/023/2014 18:23:29 - INFO - Start Flashing
04/023/2014 18:23:29 - INFO - Processing loader.sin
04/023/2014 18:23:29 - INFO - Checking header
04/023/2014 18:23:29 - INFO - Ending flash session
04/023/2014 18:23:29 - ERROR -
04/023/2014 18:23:29 - ERROR - Error flashing. Aborted
anyone got a solution?
If your bootloader is unlocked, use this method, BUT BE SURE to carrefully READ the steps, ESPECIALLY the steps "when to connect cable to phone"
http://forum.xda-developers.com/showthread.php?t=1504809
senadin001 said:
If your bootloader is unlocked, use this method, BUT BE SURE to carrefully READ the steps, ESPECIALLY the steps "when to connect cable to phone"
http://forum.xda-developers.com/showthread.php?t=1504809
Click to expand...
Click to collapse
i already said my bootloader wasn't unlocked
spazmoid said:
i already said my bootloader wasn't unlocked
Click to expand...
Click to collapse
Than do the steps from link i posted
senadin001 said:
Than do the steps from link i posted
Click to expand...
Click to collapse
i said that i already tried this to no avail
Does your flashmode stop after a little bit of time? It does on mine, that's really strange
Gesendet von meinem Nexus 5 mit Tapatalk
---------- Post added at 07:53 AM ---------- Previous post was at 07:46 AM ----------
Try to get into fastboot mode with that method i told you above. Then try to unlock your bootloader.
Pull battery out -> insert usb cable first in computer -> connect it to the Play while holding the search button -> put the battery in while still holding the search button -> then you can release the button and you should be in fastboot mode.
That's at least how it worked for me. I then flashed new software. Mine can boot to the kernel where it then shows an image and shuts down. No matter what kernel/rom I am trying.
Gesendet von meinem Nexus 5 mit Tapatalk
Here a link to my thread
http://forum.xda-developers.com/showthread.php?t=2668432

How to recover a hard bricked Xperia XA1 G3112

Could anyone please help me recovery my hard bricked Xperia XA1 G3112. because I flashed boot image but it went bad
Bootloader is unlocked.
USB Debuggung is on.
The phone can't go to fastboot neither flash mode. no vibration. no blue LED. no green LED.
When connecting the phone to the computer steady red LED go on with sound from the computer detecting a device then disconnect sound every 30 second then reconnected and so on...
on device manager it shows: USB Serial Device COM3.
on flash tool it shows: Device connected with USB debugging off , For 2011 devices line, be sure you are not in MTP mode.
I removed the back cover disconnected the battery then reconnected it then tried to go to fastboot/falsh mode but it didn't go.
I really appreciate any suggestions/help
Please anyone help is the phone completely dead or there's any chance to recover it. only if I could put it in flash mode or fastboot mode will be great
Good evening, I'm living the same thing. In my case, it's the XA1 G3123, but the problem it's the same. The only thing I could see was the red led...
I've tried Emma, Flashtool, Xperia Companion, and none of them recognized the device. Do you know if Is there any software that see a device aparently dead?
Adriano2015 said:
Good evening, I'm living the same thing. In my case, it's the XA1 G3123, but the problem it's the same. The only thing I could see was the red led...
I've tried Emma, Flashtool, Xperia Companion, and none of them recognized the device. Do you know if Is there any software that see a device aparently dead?
Click to expand...
Click to collapse
It's sad that this forum has 4 billion members and no one could help ? I wished that if someone on this forum could confirm that the phone is completely dead or what?
Anyway. I bought a new iPhone and that android junk is still in the drawer ?
First, make sure you have the drivers (flashtool and fastboot) installed.
Then download the ROM corresponding to your XA1, it can be by Flashtool or Xperifirm.
Also have at least 20% battery.
With all of this, with XA1 turned off, open Flashtool,
click the lightning button,
choose Flashmode,
select the downloaded ROM (ftf),
click Flash,
as soon as Flashtool prompts you connect to the PC by pressing the volume button at the same time
(can not remember if it is volume - or volume +, the important thing is that the notification light turns green)
and wait for the process to finish.
It works most of the time.
boyrock said:
First, make sure you have the drivers (flashtool and fastboot) installed.
Then download the ROM corresponding to your XA1, it can be by Flashtool or Xperifirm.
Also have at least 20% battery.
With all of this, with XA1 turned off, open Flashtool,
click the lightning button,
choose Flashmode,
select the downloaded ROM (ftf),
click Flash,
as soon as Flashtool prompts you connect to the PC by pressing the volume button at the same time
(can not remember if it is volume - or volume +, the important thing is that the notification light turns green)
and wait for the process to finish.
It works most of the time.
Click to expand...
Click to collapse
Thanks for the instruction. I did this . but it didn't work, when I press flash a window pops up showing animated "press volume downd and connect your phone to the PC but when I do that nothing happens. the LED light stays red when connection the USB cable. it does not go to flash mode.
I had also tried volume up but that didn't works either.
the phone seems not able to go to flash mode neither fastboot mode.
I also tried removing the battery, press volume down , connect the usb cable then connect the battery back but didn't works.
I tried pressing both volume up and down then connect the usb cable with the battery connected and disconnected but that didn't work either.
I have tried so many combinations buttons with battery in and out. but didn't work.
there's always steady red LED on when connecting the usb cable to pc or to the charger.
I checked all drivers installed correctly. but the problem is the phone does not go to fastboot neither flash mode.
I also don't know more what to do, because none of the buttons or its combinations result in something beyond the same red led. I've installed the usb vcom preload drivers, MTK 67xx drivers and I also tried to desconect the battery and once again changes nothing.
The only thing that happens is the device connecting and disconnecting every 30 seconds in the hardware manager, and no programms or flashers like Flash Tool recognize the smartphone.
If anyone could give any ideas would be helpful, considering my knowledge in cell phones hardware is very low.
https://developer.sony.com/develop/open-devices/get-started/flash-tool/
hld power and vol up, device vibration once, keep holding, release buttons when vibrated three times
phone shut down, no more led
plug usb in pc, not mobile, hold volume down and plug in mobile too after you launched emma
https://developer.sony.com/develop/open-devices/get-started/flash-tool/
emma will detect your device in flashmode and offer you a rom to download and flash, problem solved
maybe not the latest rom for your country but the most common for the device to unbrick
did u find any solution
kosrat-kj said:
did u find any solution
Click to expand...
Click to collapse
Nope.
albertineso said:
Could anyone please help me recovery my hard bricked Xperia XA1 G3112. because I flashed boot image but it went bad
Bootloader is unlocked.
USB Debuggung is on.
The phone can't go to fastboot neither flash mode. no vibration. no blue LED. no green LED.
When connecting the phone to the computer steady red LED go on with sound from the computer detecting a device then disconnect sound every 30 second then reconnected and so on...
on device manager it shows: USB Serial Device COM3.
on flash tool it shows: Device connected with USB debugging off , For 2011 devices line, be sure you are not in MTP mode.
I removed the back cover disconnected the battery then reconnected it then tried to go to fastboot/falsh mode but it didn't go.
I really appreciate any suggestions/help
Click to expand...
Click to collapse
I think that is a battery problem... i'm not sure
MCGARCI88 said:
I think that is a battery problem... i'm not sure
Click to expand...
Click to collapse
Hi,
No, it's not a battery problem, don't change it, that's not the solution... I have the same problem with my XA1 G3121, and I buy a new battery the last week, but nothing change, my phone is always blocked ... the red light stay red when i connect the phone to the PC (or when I connect it to the charger), and directly off when i disconnect it, but the problem stay the same,I can't change the red light in green or blue...
Sorry for my poor English, I'm french and I know sometimes it's difficult to understand my english...
I will see if I can test the Test point because it's the last than I don't test to ressucite my XA1.
If you find a solution to ressucite it, please write me how you do please...
luluberlu81 said:
Hi,
No, it's not a battery problem, don't change it, that's not the solution... I have the same problem with my XA1 G3121, and I buy a new battery the last week, but nothing change, my phone is always blocked ... the red light stay red when i connect the phone to the PC (or when I connect it to the charger), and directly off when i disconnect it, but the problem stay the same,I can't change the red light in green or blue...
Sorry for my poor English, I'm french and I know sometimes it's difficult to understand my english...
I will see if I can test the Test point because it's the last than I don't test to ressucite my XA1.
If you find a solution to ressucite it, please write me how you do please...
Click to expand...
Click to collapse
The sony mobiles are comlicated, i had a xperia z1 with the same issue, and I couldn't fix it, now I have a z5 compact with broken screen, I replaced the screen, and the backlight stopped working... don't worry my english is poor too, i'm spanish
HI!
Another one with same problem! Xperia Xa1 g3123 dead, red led.
During flashing there where a problem (didnĀ“t screenshoot, so, i dont know which one) now, its dead!
I found this guide for z ultra and z1 in this forum. But im not sure it will works with mine.
https://forum.xda-developers.com/showthread.php?t=2646405
luluberlu81 said:
Hi,
No, it's not a battery problem, don't change it, that's not the solution... I have the same problem with my XA1 G3121, and I buy a new battery the last week, but nothing change, my phone is always blocked ... the red light stay red when i connect the phone to the PC (or when I connect it to the charger), and directly off when i disconnect it, but the problem stay the same,I can't change the red light in green or blue...
Sorry for my poor English, I'm french and I know sometimes it's difficult to understand my english...
I will see if I can test the Test point because it's the last than I don't test to ressucite my XA1.
If you find a solution to ressucite it, please write me how you do please...
Click to expand...
Click to collapse
please I've gotten the same problem with my xa1 g3121 too, please were you able to revive your phone...?
Needs help....
Adriano2015 said:
Good evening, I'm living the same thing. In my case, it's the XA1 G3123, but the problem it's the same. The only thing I could see was the red led...
I've tried Emma, Flashtool, Xperia Companion, and none of them recognized the device. Do you know if Is there any software that see a device aparently dead?
Click to expand...
Click to collapse
Same problem here, g3121 totally dead, red light only, nothing else...
tried everything but no avail....
boyrock said:
First, make sure you have the drivers (flashtool and fastboot) installed.
Then download the ROM corresponding to your XA1, it can be by Flashtool or Xperifirm.
Also have at least 20% battery.
With all of this, with XA1 turned off, open Flashtool,
click the lightning button,
choose Flashmode,
select the downloaded ROM (ftf),
click Flash,
as soon as Flashtool prompts you connect to the PC by pressing the volume button at the same time
(can not remember if it is volume - or volume +, the important thing is that the notification light turns green)
and wait for the process to finish.
It works most of the time.
Click to expand...
Click to collapse
i am a newbie. my xperia xa1 lost connection while updating to oreo 8.0. now it has a black screen. when charged or connected to the computer the xa1 has the red light turning but still black screen. i downloaded the latest flashtool and the stock firmware for G3116 but flashtool is saying that there are no drivers loaded.
17/047/2020 20:47:18 - INFO - Flashtool 0.9.31.0
17/047/2020 20:47:18 - INFO - Searching for a web proxy
17/047/2020 20:47:18 - INFO - No proxy found, using direct connection
17/047/2020 20:47:19 - INFO - Loading devices database
17/047/2020 20:47:20 - INFO - Loaded 129 devices
17/047/2020 20:47:20 - INFO - Starting phone detection
17/047/2020 20:47:22 - INFO - Device disconnected
17/047/2020 20:47:40 - INFO - List of connected devices (Device Id) :
17/047/2020 20:47:40 - INFO - List of ADB devices :
17/047/2020 20:47:44 - INFO - - none
17/047/2020 20:47:44 - INFO - List of fastboot devices :
17/047/2020 20:47:44 - INFO - - none
i alreaady installed fastboot but the phone is still not detected by flashtool, emma and companion. what are the drivers for the xa1 inside the flashtool driver package folder?
both in emma and companion are saying that my phone is locked out.
please help me.
XA1 Drivers for Flashtool
boyrock said:
First, make sure you have the drivers (flashtool and fastboot) installed.
Then download the ROM corresponding to your XA1, it can be by Flashtool or Xperifirm.
Also have at least 20% battery.
With all of this, with XA1 turned off, open Flashtool,
click the lightning button,
choose Flashmode,
select the downloaded ROM (ftf),
click Flash,
as soon as Flashtool prompts you connect to the PC by pressing the volume button at the same time
(can not remember if it is volume - or volume +, the important thing is that the notification light turns green)
and wait for the process to finish.
It works most of the time.
Click to expand...
Click to collapse
i am a newbie. my xperia xa1 lost connection while updating to oreo 8.0. now it has a black screen. when charged or connected to the computer the xa1 has the red light turning but still black screen. i downloaded the latest flashtool and the stock firmware for G3116 but flashtool is saying that there are no drivers loaded.
17/047/2020 20:47:18 - INFO - Flashtool 0.9.31.0
17/047/2020 20:47:18 - INFO - Searching for a web proxy
17/047/2020 20:47:18 - INFO - No proxy found, using direct connection
17/047/2020 20:47:19 - INFO - Loading devices database
17/047/2020 20:47:20 - INFO - Loaded 129 devices
17/047/2020 20:47:20 - INFO - Starting phone detection
17/047/2020 20:47:22 - INFO - Device disconnected
17/047/2020 20:47:40 - INFO - List of connected devices (Device Id) :
17/047/2020 20:47:40 - INFO - List of ADB devices :
17/047/2020 20:47:44 - INFO - - none
17/047/2020 20:47:44 - INFO - List of fastboot devices :
17/047/2020 20:47:44 - INFO - - none
i alreaady installed fastboot but the phone is still not detected by flashtool, emma and companion. what are the drivers for the xa1 inside the flashtool driver package folder?
both in emma and companion are saying that my phone is locked out.
please help me.
I know this is a old thread but people you must understand, what happened is that your Sony phone disconnected while flashing the boot.img (so now the phone has no software at all! ) No rom is easy fix, but no bootloader (boot.img) you are sol
These phones have a tendency to do this if you chose the wrong settings before flashing.
So basically you have a lifeless brick (the phone doesn't know it's a phone) that's why it doesn't do nothing but have a red light, the only FIX is JTAG jtagging the device or to swapp the motherboard i have a xa1 ultra from 2018 i bricked, 4 years later i bought a motherboard and swapped it and voila back up and running.
So please flash and root responsibly most soft bricked can be fixed but when you delete the boot.img, only JTAG can save you good luck!!

Categories

Resources