[Q] LK3 and MB1 on 4.1.2 - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

Hey guys,
I am on Baseband version I747UCDLK3, and Build number JZO54K.I747VRBMB1, 4.1.2. Running Hyperdrive RLS16. I have been seeing some posts this morning about being able to flash and get to 4.3 but still be able to have the option to flash back to Stock root injected 4.1.1 if I want. I need some more info on this if you guys could help me. Im going to be searching these posts all day so dont think Im just being lazy, but there is a lot of posts here. Do you think I should just wait until there is a confirmed fix for all of this and just flash 4.1.2 ROMS for now? THanks community.

electrojas said:
Hey guys,
I am on Baseband version I747UCDLK3, and Build number JZO54K.I747VRBMB1, 4.1.2. Running Hyperdrive RLS16. I have been seeing some posts this morning about being able to flash and get to 4.3 but still be able to have the option to flash back to Stock root injected 4.1.1 if I want. I need some more info on this if you guys could help me. Im going to be searching these posts all day so dont think Im just being lazy, but there is a lot of posts here. Do you think I should just wait until there is a confirmed fix for all of this and just flash 4.1.2 ROMS for now? THanks community.
Click to expand...
Click to collapse
Flash all the 4.3 ROMs you want, just be sure not to flash the bootloader. The ROMs here are stock rooted and do not contain the bootloader. http://forum.xda-developers.com/showthread.php?t=2540998. You can come back from these no problem. And to confuse things even further, even if you did flash the official 4.3 with the bootloader, you could still flash 4.1.x ROMs as long as they do not contain a bootloader.

Related

[Q] Need to go back to 4.1.2 stock

Ok, long story short, I need to go back to stock ROM. I am currently running the deadly venom ROM 4.1.2. I have been reading in the forums, but I am getting a little confused. There are so many different topics regarding this. I just don't want to brick my phone. So, do i need to just find the 4.1.2 stock firmware and then use odin to flash it? Or do I need to go back to 4.1.1 and the use OTA update? I didn't know if I went back to 4.1.1 it would brick my phone since i'm on 4.1.2. Thanks in advance for the help.
Download 4.1.2 stock for your phone/carrier and flash with Odin downgrading not necessary
Sent from my SGH-I747M using Tapatalk
OK, thanks for the info. I will give it a shot.

[Q] 4.3 Stock for Odin?

Hey guys,
I'm trying to go back to a stock Touchwiz ROM from CyanogenMod 10.2. My only problem is, I can't Odin back to a stock from because the only Odin compatible file I have is 4.1.1 which my phone will no longer go to since my baseband was updated after trying a former 4.3 ROM.
Can anyone link me to a 4.3 ROM that I can flash in Odin? I'm asking because most of the ROM's I'm finding that are 4.3 require you to be on a TW ROM before flashing their ROM. Thanks.
n_alvarez2007 said:
Hey guys,
I'm trying to go back to a stock Touchwiz ROM from CyanogenMod 10.2. My only problem is, I can't Odin back to a stock from because the only Odin compatible file I have is 4.1.1 which my phone will no longer go to since my baseband was updated after trying a former 4.3 ROM.
Can anyone link me to a 4.3 ROM that I can flash in Odin? I'm asking because most of the ROM's I'm finding that are 4.3 require you to be on a TW ROM before flashing their ROM. Thanks.
Click to expand...
Click to collapse
Go to http://www.sammobile.com/firmwares/and put in your phone info and download the stock file.
Satstalker said:
Go to http://www.sammobile.com/firmwares/and put in your phone info and download the stock file.
Click to expand...
Click to collapse
This link is useless for me as it does not have a 4.3 stock rom listed in their official firmwares. They have only up to 4.1.2 which I cannot Odin back to since my baseband was already updated.
n_alvarez2007 said:
This link is useless for me as it does not have a 4.3 stock rom listed in their official firmwares. They have only up to 4.1.2 which I cannot Odin back to since my baseband was already updated.
Click to expand...
Click to collapse
Maybe there is no update for your carrier yet! A thanks would be nice for trying to help you. But hey next time i wont even reply
|ROM|Bootloader|Kernel|Modem| AT&T Official 4.3 MJB |24 Nov 2013| There you go all stock. make sure you hit the thanks button for everyone (not my files I just found them)
You cant flash this in odin but can use TWRP or CWM. will get you back all stock. Good luck...
theramsey3 said:
|ROM|Bootloader|Kernel|Modem| AT&T Official 4.3 MJB |24 Nov 2013| There you go all stock. make sure you hit the thanks button for everyone (not my files I just found them)
You cant flash this in odin but can use TWRP or CWM. will get you back all stock. Good luck...
Click to expand...
Click to collapse
Do I have to be on a stock rom to use this? I'm currently on Quantum V3 and I don't have access to a stock rom to revert to since my baseband was updated.
n_alvarez2007 said:
Do I have to be on a stock rom to use this? I'm currently on Quantum V3 and I don't have access to a stock rom to revert to since my baseband was updated.
Click to expand...
Click to collapse
No you don't have to be on the stock rom to use that, but the bootloaders are for 4.3 so if you haven't updated yet this will update you.
You can flash any rom you want to as long as you do not mess with the bootloader you will be OK. I do not know if this work on anything besides an at&t phone using it on anything else is done so at your own risk just the same as using it.
What about the recovery? any way to get a stock recovery image?

[Q] Can't update from 4.1.2

I have a VM l710 that came with 4.3. I managed to install ClockworkMod v6.0.4.3 and flashed Slimbean. I had a few issues with Slimbean so I decided that I wanted to go back to stock. But, of course, I forgot to run a back up in CM. I eventually found an OTA update for my phone that was 4.1.2. I installed it and everything works well. Its rooted and I still have CM. I get update notifications every so often but it does not seem to update my phone and now I am stuck at 4.1.2.
Is there a way I can update to 4.3?
Would I be able to find an OTA of 4.3, flash it, and then use knox remover? Or 4.1.2 --> 4.2 --> 4.3 if 4.1 --> 4.3 is too big of a jump?
Sorry if this question has been answered before, I tried google but since I had 4.3 before and now have 4.1.2 I don't want to mess up a bootloader or something.
Thank you
Every custom 4.3 Rom in the development section is Knox free, just flash the one you like.
metalfan78 said:
Every custom 4.3 Rom in the development section is Knox free, just flash the one you like.
Click to expand...
Click to collapse
Thanks. I updated with this ROM.
Everything works well except mobile data. I flashed the recommended modem but it didn't help.
Any recommendations for this?
EDIT: flashed an MK5 modem, everything works now.
DId you update your PRL/Profile? You can also try ##72786# on your dial pad.

[Q] Back to 4.3 Stock Rom to Unlock the phone?? HELP

Hello everyone,
I have searched the site for some ways to unlock my device. I am running liquidsmooth 4.4.4 and as far as I know there is no way to unlock customs Roms running 4.3/4.4, unless you go back to the original stock rom and use either AT&T or third party site unlock code. So, I called AT&T and they provided me with the unlock code and they told me the same thing, the unlock code will not work until you go back to the original factory stock rom!
So, I have been searching here for the right 4.3 stock rom and I found out many posts and I got confused which to use. I would highly appropriate it if any one can help me and direct me to the right source/process for 4.3 stock rom steps and installation so I won't brick my phone.
Thanks in advance
GueSs_me said:
Hello everyone,
I have searched the site for some ways to unlock my device. I am running liquidsmooth 4.4.4 and as far as I know there is no way to unlock customs Roms running 4.3/4.4, unless you go back to the original stock rom and use either AT&T or third party site unlock code. So, I called AT&T and they provided me with the unlock code and they told me the same thing, the unlock code will not work until you go back to the original factory stock rom!
So, I have been searching here for the right 4.3 stock rom and I found out many posts and I got confused which to use. I would highly appropriate it if any one can help me and direct me to the right source/process for 4.3 stock rom steps and installation so I won't brick my phone.
Thanks in advance
Click to expand...
Click to collapse
If your bootloaders are on 4.4, you can't downgrade them (or you'll brick!).
You can use Terminal Emulator to know which one you're on:
Code:
getprop ro.bootloader
Once you know which one you have, you can go ahead and grab its stock version.
http://forum.xda-developers.com/showthread.php?t=1968625
i think this thread provides stock downloads.
good luck.
err on the side of kindness
BWolf56 said:
If your bootloaders are on 4.4, you can't downgrade them (or you'll brick!).
You can use Terminal Emulator to know which one you're on:
Code:
getprop ro.bootloader
Once you know which one you have, you can go ahead and grab its stock version.
Click to expand...
Click to collapse
Thanks for the reply, I checked the bootloader as you said and I got ( I747UCDLK3 ). So, I am guessing that I am still on 4.3 because the last bootloader update was through this process:
http://forum.xda-developers.com/showthread.php?t=2387423
I tried to flash the stock file update4.3.zip on that thread using TWRP but it did not work.
Any idea?
Thanks again
mrrocketdog said:
http://forum.xda-developers.com/showthread.php?t=1968625
i think this thread provides stock downloads.
good luck.
err on the side of kindness
Click to expand...
Click to collapse
Thanks for your kind reply. Is there any different to choose between the download options. I know it says the first one is the newest one, I am downloading
http://forum.xda-developers.com/showthread.php?t=2496425
So I hope it is the right one!?
I already have the stock rom 4.3 from
http://forum.xda-developers.com/showthread.php?t=2387423
But as I said on the previous reply not sure why I can't flash the update43.zip through the recovery?
Best,,,,
GueSs_me said:
Thanks for the reply, I checked the bootloader as you said and I got ( I747UCDLK3 ). So, I am guessing that I am still on 4.3 because the last bootloader update was through this process:
http://forum.xda-developers.com/showthread.php?t=2387423
I tried to flash the stock file update4.3.zip on that thread using TWRP but it did not work.
Any idea?
Thanks again
Click to expand...
Click to collapse
LK3 is 4.1.1. I'm guessing the 4.3 bootloaders update didn't work at all.
Now that you know you have LK3, just grab the stock firmware and flash it. (backup first)
thanks @BWolf56.
:GOOD:
err on the side of kindness
BWolf56 said:
LK3 is 4.1.1. I'm guessing the 4.3 bootloaders update didn't work at all.
Now that you know you have LK3, just grab the stock firmware and flash it. (backup first)
Click to expand...
Click to collapse
This is really strange. So, if I may ask, how my bootloader is still 4.1.1 and I am able to flash 4.3/4.4 roms? Also, if I install I747UCDLK3 can I go back to 4.3 custom roms without updating the bootloader!!! because that what I did last time I follwed the steps in below web site to be able to flash 4.3 rom,,,,, but apparently I am still on 4.1.1 bootloader!!
http://forum.xda-developers.com/showthread.php?t=2387423
4.3 roms could still be flashed on older firmware. 4.4 roms too as long as they are not touchwiz. If its a touchwiz 4.4.2 rom you must have at least 4.3 firmware though.
Hi i want to know if i can flash an original 4.3 firmware my bootloader is I747MVLUFNE6 can i go back or i will brick my phone if i tried?
No you cannot downgrade firmware. You can only flash the same or newer builds. Or you can flash older roms and kernels, but nothing else.

What is the quickest way to upgrade everything to the latest note 2 software version?

Hi im a newbie and I wast just wondering if anyone knew where I can find the latest firmware update? I have an att note 2 that I flashed back to stock 4.1.1 and then rooted it but im having a hard time flashing all the latest custom roms like they keep failing! So my only guess is that my modem or kernel or baseband or bootloader needs to be updated or something! So my question is is there a way I can keep root and update these and if so how would I go bout doing so? Any answers would be much appreciated!
The simplest, but not fastest, would be to flash back to a completely stock 4.1.1 from and run ota updates until the phone is running 4.4.2.

Categories

Resources