Develop Bugs

Sprint Note 2 bricked

Hello everyone i got a note 2 sprint bricked. I used odin and it keeps saying failed at sboot.bin right after recovery.please help if you can thanks.

carshass said:
Hello everyone i got a note 2 sprint bricked. I used odin and it keeps saying failed at sboot.bin right after recovery.please help if you can thanks.
Click to expand...
Click to collapse
You need to post more info if possible but it sounds like you are trying to downgrade from MA7 to an earlier firmware like LK8. The update included a security patch so it won't let you go back to insecure. Try pulling the sboot out of whatever you are trying to flash or stick with MA7
Sent from my SPH-L900 using xda app-developers app

Try downloading another .tar file for ljc. I had the same issue. I believe i got a working one directly from samfirmware
Sent from my SPH-L900 using xda app-developers app

oook,, so im new to the note2 just came from a gs2 with jellybam on it...soo im running jellybomb and i flashed venum ice reborn 1.5 it seemed to fash fine until reboot,, then it just hung on the note2 bootup screen. i hold down home and power and it says up to download custom rom down to restart... both jut hang. help?
i got as far as trying to find odin but i couldnt and stopped.

shangus1 said:
oook,, so im new to the note2 just came from a gs2 with jellybam on it...soo im running jellybomb and i flashed venum ice reborn 1.5 it seemed to fash fine until reboot,, then it just hung on the note2 bootup screen. i hold down home and power and it says up to download custom rom down to restart... both jut hang. help?
i got as far as trying to find odin but i couldnt and stopped.
Click to expand...
Click to collapse
umm ya i see why i didnt get a reply.. all i had to do was hold volume up home power and the n re flash... its amazing what you can figure out inhere when ignored lolz

carshass said:
Hello everyone i got a note 2 sprint bricked. I used odin and it keeps saying failed at sboot.bin right after recovery.please help if you can thanks.
Click to expand...
Click to collapse
I've been having the same problem for a couple days now. I can install a custom rom but I can't figure out how to get back to stock.
You need to post more info if possible but it sounds like you are trying to downgrade from MA7 to an earlier firmware like LK8
Click to expand...
Click to collapse
That might be the problem I'm having.
EDIT:
Yep, that was it. Thanks!

carshass said:
Hello everyone i got a note 2 sprint bricked. I used odin and it keeps saying failed at sboot.bin right after recovery.please help if you can thanks.
Click to expand...
Click to collapse
It's not brick cuz odin can still see your phone. If you dont have TWRP on it, go to www.twrp.com and download the tar file for sprint note 2. Then use Odin to flash it. Once you are done that, go here http://forum.xda-developers.com/showthread.php?t=2086769 to get either the old LJC or MA7 and put it in your phone either internal or external SD. Do the wipe cache/factory reset first. Then flash it. It will go back to stock rom.

Help
Hello even though its old I figured I would post here first instead of starting a new thread, my friend has a Note 2 for Sprint never rooted or custom ROM flashed and he said it was sitting on the charger and when he woke up in the morning it was off and after attempting to power the device on it stays stuck on the Samsung logo. I cant get Kies to recognize the device at all not matter what pc is use however it shows up in Odin but it fails everything from stock files ( older and current ) , different versions of Odin, recoveries and I even tried a " unbrick .tar file " . Any help at all would be appreciated I will include pics

demorik said:
Hello even though its old I figured I would post here first instead of starting a new thread, my friend has a Note 2 for Sprint never rooted or custom ROM flashed and he said it was sitting on the charger and when he woke up in the morning it was off and after attempting to power the device on it stays stuck on the Samsung logo. I cant get Kies to recognize the device at all not matter what pc is use however it shows up in Odin but it fails everything from stock files ( older and current ) , different versions of Odin, recoveries and I even tried a " unbrick .tar file " . Any help at all would be appreciated I will include pics
Click to expand...
Click to collapse
Can you odin a custom recovery and boot into it?
1. Put phone in download mode
2. In odin program uncheck reboot and flash recovery
3. After flash disconnect phone and pull battery
4. Quickly insert and remove battery multiple times (if you just reinsert battery it will automatically boot)
5. Boot phone into recovery backup any important data that is on your internal sdcard
6. Do factory reset then flash billards stock mc2 with counter reset (do not wipe cache after flashing this)
7. Flash superuser zip found in billards Op
8. Reboot phone and freakout when see the screen do odd things and reboot (this is normal)
Now it will bootup on stock rooted mc2.
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
Can you odin a custom recovery and boot into it?
1. Put phone in download mode
2. In odin program uncheck reboot and flash recovery
3. After flash disconnect phone and pull battery
4. Quickly insert and remove battery multiple times (if you just reinsert battery it will automatically boot)
5. Boot phone into recovery backup any important data that is on your internal sdcard
6. Do factory reset then flash billards stock mc2 with counter reset (do not wipe cache after flashing this)
7. Flash superuser zip found in billards Op
8. Reboot phone and freakout when see the screen do odd things and reboot (this is normal)
Now it will bootup on stock rooted mc2.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have tried but I never tried to uncheck anything in Odin, I will try it later and post the results thanks.

say my brother it still doesnt let me boot into recovery what do i do...
jlmancuso said:
Can you odin a custom recovery and boot into it?
1. Put phone in download mode
2. In odin program uncheck reboot and flash recovery
3. After flash disconnect phone and pull battery
4. Quickly insert and remove battery multiple times (if you just reinsert battery it will automatically boot)
5. Boot phone into recovery backup any important data that is on your internal sdcard
6. Do factory reset then flash billards stock mc2 with counter reset (do not wipe cache after flashing this)
7. Flash superuser zip found in billards Op
8. Reboot phone and freakout when see the screen do odd things and reboot (this is normal)
Now it will bootup on stock rooted mc2.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse

[Q] stock/no root phone won't boot, only DL mode works

Hello,
My unrooted At&T galaxy s3 will not go past the Samsung Galaxy SIII splash screen. When I enter recovery it just gives me a dead android guy.
I had this problem before and to fix it, I used odin to flash the stock 4.0.4, then I flashed 4.1.1 (I think these are the correct versions, I followed instructions here), then my phone wouldn't OTA update to touchwiz 4.3 so I flashed it using recovery mode using instructions and files I found here. The phone worked fine for a few weeks after that, but then started to reboot randomly and delete apps. Eventually it just stopped working all together which is where I am now.
I tried to install TWRP using odin which odin says worked but when I try to go to recovery mode I still just see the dead android guy. The phone did not have USB debugging mode turned on so I am not sure if I could install a custom recovery at all.
I tried the CF-auto root that I found here which got partway through and then failed.
Do you guys have any suggestions? Is there a stock touchwiz 4.3 rom that I could flash using odin??
Thank you very much, please let me know if you require any more information, I really want to get my phone working again.

korarchaeota said:
Hello,
My unrooted At&T galaxy s3 will not go past the Samsung Galaxy SIII splash screen. When I enter recovery it just gives me a dead android guy.
I had this problem before and to fix it, I used odin to flash the stock 4.0.4, then I flashed 4.1.1 (I think these are the correct versions, I followed instructions here), then my phone wouldn't OTA update to touchwiz 4.3 so I flashed it using recovery mode using instructions and files I found here. The phone worked fine for a few weeks after that, but then started to reboot randomly and delete apps. Eventually it just stopped working all together which is where I am now.
I tried to install TWRP using odin which odin says worked but when I try to go to recovery mode I still just see the dead android guy. The phone did not have USB debugging mode turned on so I am not sure if I could install a custom recovery at all.
I tried the CF-auto root that I found here which got partway through and then failed.
Do you guys have any suggestions? Is there a stock touchwiz 4.3 rom that I could flash using odin??
Thank you very much, please let me know if you require any more information, I really want to get my phone working again.
Click to expand...
Click to collapse
It almost sounds like you're dealing with a situation I'm having on my galaxy tab. It has the internal SD chip going bad. I had to use a rom specially made to boot from a partitioned external sd card. Sorry, I can't help more, but the symptoms seem similar.
Sent from my SCH-I800 using Tapatalk

Thank you for your reply. Where did you obtain a rom that could boot from the external sd card?
wrenhal said:
It almost sounds like you're dealing with a situation I'm having on my galaxy tab. It has the internal SD chip going bad. I had to use a rom specially made to boot from a partitioned external sd card. Sorry, I can't help more, but the symptoms seem similar.
Sent from my SCH-I800 using Tapatalk
Click to expand...
Click to collapse

Try flashing the TWRP again with Odin, but make sure the auto reboot option on the left is unchecked in Odin. After flashing, unplug the phone and then hold volume up + menu + power buttons at the same time until it reboots.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app

shortydoggg said:
Try flashing the TWRP again with Odin, but make sure the auto reboot option on the left is unchecked in Odin. After flashing, unplug the phone and then hold volume up + menu + power buttons at the same time until it reboots.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I just tried it with only F. Reset Time checked, it installs it and says a green Pass!. I then unplugged it, tried to hold volume up + menu + power buttons for a while but nothing happened. I pulled the battery and then did volume up + menu + power buttons and went straight back to dead android guy. Any ideas?

Only other thing right now is to make sure you have the latest odin, which is 3.09
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app

shortydoggg said:
Only other thing right now is to make sure you have the latest odin, which is 3.09
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Trying everything with the new version of Odin results in all the same results.
Does anyone know if there is a tar (Odin flashable) version of update43.zip found in this thread?
http://forum.xda-developers.com/showthread.php?t=2387423
Thanks!

korarchaeota said:
Trying everything with the new version of Odin results in all the same results.
Does anyone know if there is a tar (Odin flashable) version of update43.zip found in this thread?
http://forum.xda-developers.com/showthread.php?t=2387423
Thanks!
Click to expand...
Click to collapse
No there's no Odin flash-able there.
Sorry, we don't seem to have any answers for your problem. It seems like it may be more of a hardware issue than software.

Did you phone boot after flashing stock 4.04?

audit13 said:
Did you phone boot after flashing stock 4.04?
Click to expand...
Click to collapse
Yes it did, the first time that this started happening. But I was unable to do that again, I thought since I flashed all the way to 4.3 and I read that once you go to 4.3 you can't go back. Is that correct?
Thank you for your help. I was hoping to try an odin flashable touchwiz 4.3 but I can't seem to find one.

So you had 4.04 on your phone and you used OTA updates to get to 4.3? If this is correct, then you can't flash a stock AT&T 4.3 ROM because it has never been made available to the public; therefore, the only 4.3 ROMs that may work are based on the leaked AT&T 4.3 ROM or compiled from an OTA update.
Once of these ROMs may get your phone going again: http://forum.xda-developers.com/showthread.php?t=2498233

audit13 said:
So you had 4.04 on your phone and you used OTA updates to get to 4.3? If this is correct, then you can't flash a stock AT&T 4.3 ROM because it has never been made available to the public; therefore, the only 4.3 ROMs that may work are based on the leaked AT&T 4.3 ROM or compiled from an OTA update.
Once of these ROMs may get your phone going again: http://forum.xda-developers.com/showthread.php?t=2498233
Click to expand...
Click to collapse
Thank you for your suggestion, all the ones I tried there need recovery to flash...not odin. Is it possibly to make an odin file from a recovery flash file??
Thanks!

korarchaeota said:
Thank you for your suggestion, all the ones I tried there need recovery to flash...not odin. Is it possibly to make an odin file from a recovery flash file??
Thanks!
Click to expand...
Click to collapse
Did you try installing Philz Touch from Odin? As was suggested earlier, don't use auto reboot. Once Philz has been installed and you see Reset in the window, disconnect the USB cable, remove the battery, replace the battery, boot into recovery, wipe and flash a custom ROM. This may help you get your phone working for now.

audit13 said:
Did you try installing Philz Touch from Odin? As was suggested earlier, don't use auto reboot. Once Philz has been installed and you see Reset in the window, disconnect the USB cable, remove the battery, replace the battery, boot into recovery, wipe and flash a custom ROM. This may help you get your phone working for now.
Click to expand...
Click to collapse
Thank you for your suggestion, but I still get the dead android guy after flashing and trying to go into recovery. Any other ideas??

korarchaeota said:
Thank you for your suggestion, but I still get the dead android guy after flashing and trying to go into recovery. Any other ideas??
Click to expand...
Click to collapse
Did you try philz or cwm? I am not sure why stock recovery is not being overwritten.

audit13 said:
Did you try philz or cwm? I am not sure why stock recovery is not being overwritten.
Click to expand...
Click to collapse
I tried twrp and philz, I haven't tried cwm yet, should I? Is it not working because I didn't enable USB debugging before it stopped working?
Thanks for your help!

korarchaeota said:
I tried twrp and philz, I haven't tried cwm yet, should I? Is it not working because I didn't enable USB debugging before it stopped working?
Thanks for your help!
Click to expand...
Click to collapse
Nope, USB debugging will not make a difference.
The latest Philz Touch is based on the latest CWM. After your flash Philz, are you letting the phone auto reboot on its own after flashing in Odin?
I know of no way to convert a custom ROM so it can be flashed in Odin.

[Q] TWRP 2.6.3.1 Asks for password

I woke up this morning to my phone perpetually rebooting.
I was running a nightly of CM 11.
Now when I try to go into Recovery I get a screen that asks for a password. I have no idea what that password is as I did not set one. I tried wiping data to no avail. I tried flashing a new recovery via Odin this did not work (Odin said successful but the screen on the phone never showed the transfer of the file). No matter what wipe method I use in recovery it just says fail, doesn't work at all and hangs or will say it can't mount. I have searched and searched and tried and tried and I'm stuck. I even tried ADB that didn't work either. Please help!

Try flashing Philz Touch (based on CWM) over TWRP via Odin. I have always had good luck with CWM and Philz.
Download the tar version: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att

audit13 said:
Try flashing Philz Touch (based on CWM) over TWRP via Odin. I have always had good luck with CWM and Philz.
Download the tar version: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
Click to expand...
Click to collapse
I tried this already. I cannot flash ANYTHING via ODIN. Odin states that the process completed but the bar on the phone on the download screen never shows up to show that it has accepted a file.

therecker said:
I tried this already. I cannot flash ANYTHING via ODIN. Odin states that the process completed but the bar on the phone on the download screen never shows up to show that it has accepted a file.
Click to expand...
Click to collapse
Did you unchecked F . reset and unchecked auto reboot when you flashed recovery in Odin? After you flash the file you have to pull the battery then replace it and boot to recovery do not allow the phone to boot to OS or you have to flash again as your recovery will only stick if you pull the battery and boot to recovery after flashing it. After you get into it the first time all will be well with the world again you can flash your heart out.
I had twrp ask me for a password once I hit the back arrow key and told it to mount my external SD card then flashed my rom, bootloader, kernel and modem then rebooted no problem.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

theramsey3 said:
Did you unchecked F . reset and unchecked auto reboot when you flashed recovery in Odin? After you flash the file you have to pull the battery then replace it and boot to recovery do not allow the phone to boot to OS or you have to flash again as your recovery will only stick if you pull the battery and boot to recovery after flashing it. After you get into it the first time all will be well with the world again you can flash your heart out.
I had twrp ask me for a password once I hit the back arrow key and told it to mount my external SD card then flashed my rom, bootloader, kernel and modem then rebooted no problem.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
This did not work. When I use ODIN all that is happening is that ODIN says it has succeeded but the little progress bar that usually shows up on the phone when you are in download mode never comes up. I did try this method though and it didn't work.
I restarted the phone in ODIN mode then opened ODIN then connected the USB cable then unchecked the two boxes you mentioned then flashed a new non TWRP recovery then waited for ODIN to say successful then the phone never showed the progress bar so I waited 2 mins until I pulled the battery then I restarted phone directly to recovery and still have the password prompt. Even after hitting cancel I cannot interact with recovery because every option I choose just says fail. I cannot even mount external sd card.

What phone do you have? What was the most recent stock ROM on your phone? Maybe you can flash a stock ROM.

There is a copy of the stock Samsung 3e recovery (which we can't use to flash zips with) I'm curious if maybe it can overwrite what you have going on? On the password screen I wasn't hitting cancel I was simply hitting the back arrow key. I will see if I have a copy of the stock recovery, just maybe you can flash it then flash another recovery after that so you can fix your phone.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

I have Samsung Galaxy S 3 At&T (d2att) SGH-I747 whichever one of those you want. The most recent stock rom on the phone was when I bought it brand new a few months after it came out. I tried installing a stock rom. I tried this using ODIN and it failed. The issue here is that TWRP somehow encrypted the entire file system so NOTHING at all in recovery works. When I use ODIN mode it never shows on my phone that it is accepting a transfer from the computer. When I tried the stock rom via ODIN method it actually failed in ODIN instead of telling me it succeeded and then just not work. It failed at the point when it says Firmware Update Start...aboot.mbn...NAND Write Start!...Complete(Write) operation failed. I am up for any suggestions but I need them to be detailed instructions because I have tried so many things I need to know what exact steps to follow.

I believe the aboot file is a bootloader. Did you ever have a stock 4.3 ROM on the phone? If you did, it probably has the stock 4.3 AT&T bootloader which cannot be downgraded without bricking the phone which means you cannot flash a ROM with an older bootloader via Odin.

audit13 said:
I believe the aboot file is a bootloader. Did you ever have a stock 4.3 ROM on the phone? If you did, it probably has the stock 4.3 AT&T bootloader which cannot be downgraded without bricking the phone which means you cannot flash a ROM with an older bootloader via Odin.
Click to expand...
Click to collapse
To my knowledge I never had a stock 4.3 ROM on the phone. The only stock ROM to touch this phone was the one that came on it. So be specific what are you actually suggesting in this post that I do?

therecker said:
To my knowledge I never had a stock 4.3 ROM on the phone. The only stock ROM to touch this phone was the one that came on it. So be specific what are you actually suggesting in this post that I do?
Click to expand...
Click to collapse
I am surprised that the aboot file was giving you a problem because the bootloader can be downgraded as long as it is not a 4.3 bootloader.
Do you recall exactly which ROM was on the phone when you got it? Where did you get the stock ROM?

audit13 said:
I am surprised that the aboot file was giving you a problem because the bootloader can be downgraded as long as it is not a 4.3 bootloader.
Do you recall exactly which ROM was on the phone when you got it? Where did you get the stock ROM?
Click to expand...
Click to collapse
It was a CM11 Nightly ROM from the very beginning of February. And before that it was a CM10.2 Stable ROM.

Which stock ROM was on your phone before you loaded a custom ROM?

audit13 said:
Which stock ROM was on your phone before you loaded a custom ROM?
Click to expand...
Click to collapse
I have no idea. It was when I first got the phone in November of 2012.

Sounds like your phone may be running a 4.3 bootloader which means your bootloader is locked and cannot be downgraded. This may explain why you are getting errors when trying to flash Odin. There is no stock AT&T 4.3 ROM that can be flashed via Odin.

Soft-bricked? Odin passes but still stuck on loadup

AT & T Galaxy Note 2 SGH-13I7
So I'm at a loss on what to do with my phone at this point..
Everything was running great until yesterday, I attempted to root it, the root attempt was unsuccesful but the phone still worked just fine and It even got shut off and turned on a few times after the failed attempt. But one time it froze up after installing an app and after that the phone got stuck on the boot screen.
So this morning I flashed the stock 4.1.2 Rom and it worked again, then I updated the phone on the device itself. OTA is what you would call it I believe. And now I'm back to where I started. The phone gets stuck on the galaxy note 2 loading screen and it wont start.
I cannot enter recovery mode in order to wipe the settings and clear the cache.
I can enter download mode however, and my attempts at flashing the stock firmware PASS on Odin but the phone only gets stuck on the loading screen again afterwards
Does anyone know what I should do?
Your help is greatly appreciated. Thanks a bunch
Is there any way I might be able to enter a recovery mode using an micro SD card?

To which rom you updated? Know that from newest version there is no going back.
Sent from my GT-N7100

note2nooby said:
To which rom you updated? Know that from newest version there is no going back.
Edit : there's a way(maybe) to get to download mode. But not sure if it will work on your phone. There is a thing called jig kick USB. You can build one yourself.
Sent from my GT-N7100
Click to expand...
Click to collapse
Thats probably my problem then. I was running 4.3 and the stock firmware I installed was 4.1.
Is jig kick USB used to get into download mode, if thats the case then I am already able to do that. Just not get into recovery mode.

Yes I noticed later that you can access download mode. So try to flash the rom you updated to but for your carier as your phone is from at&t you should use their rom. I don't have carrier phone so I speak theoretically. But I guess you understand what I mean.
Sent from my GT-N7100

note2nooby said:
Yes I noticed later that you can access download mode. So try to flash the rom you updated to but for your carier as your phone is from at&t you should use their rom. I don't have carrier phone so I speak theoretically. But I guess you understand what I mean.
Sent from my GT-N7100
Click to expand...
Click to collapse
I just got the AT & T ROM from sammobile and flashed it with Odin, it says it passes, but once the phone reboots it just gets stuck on the loading screen again
Thanks for your help by the way

BicyclingSloth said:
I just got the AT & T ROM from sammobile and flashed it with Odin, it says it passes, but once the phone reboots it just gets stuck on the loading screen again
Thanks for your help by the way
Click to expand...
Click to collapse
newest at&t rom is mk6 you will find it in the at&t Dev section an odin one pre rooted is available.
Sent from my GT-N7105 using Tapatalk

cnote74 said:
newest at&t rom is mk6 you will find it in the at&t Dev section an odin one pre rooted is available.
Sent from my GT-N7105 using Tapatalk
Click to expand...
Click to collapse
mine is the same n7105, so how did this go, did it worked?
mine n7105 says passed and once rebooted don't pass n7105 logo, i can only enter download mode,

I'm having the exact same issue, 7100 Sprint. Odin flashes pass but still stuck on SGNII screen, can't flash recovery or ROM. Had 4.1.2 and accepted OTA mistakenly.

I literally just had this problem with my SGH-I317 and fixed it with this:
http://forum.xda-developers.com/showthread.php?t=2589891 go down to where it says "If you are running the official *MK6* firmware"

ive had something similar. had odin pass. no cwm / twrp access only stock recovery and stock downloader mode.
you need to flash a stock rom to get it back, then boot into it. connect pc. (a different usb port sometimes) get ODIN to reboot it into downloader mode. I had major problems getting to that point. but got it from flashing a stock rom. I have also had this old CM10 rom that fix's all partitions etc. i cant remember the name of it now.
a couple of times ive had issues getting into custom recovery. when you hold power +vol up + home key. when u do keep holding power. it loops boot and loops back again. when u release. make sure you hold power for like 1-2 seconds on logo. dont release power button before logo appears. wait a second after it appears. get it every time now.

Try to flash latest TWRP trough ODIN and check if you can boot in to recovery after that.

Need serious help unrooting/fixing my Samsung Galaxy S3 SGH-1747

I have a Samsung Galaxy S3 AT&T and for about a year and a half always wanted to root it but had no idea how. I had an iPhone a while back and used to jailbreak it I became an expert at it. Rooting is not so easy compared at least with the problems I've been experiencing
I started by watching hundreds of root videos and ended up rooting it with Odin and Kit Kat tar file im not sure of the specific file but I'm almost 100% it was my version 4.4.2 that I flashed.
After I did this I downloaded the basics and tried to get TWRP but gooManager wasnt working for some reason.
I tried to flash the Cyanongen 11 onto my phone using the installer for the comp and on google play store and it worked up until the end I got the dead droid symbol for a bit and it finished downloading to show the "ROM may flash stock recover on boot. Fix?" error message and I selected no and "Root Access Possibly Lost Fix?" I also selected no. My phone booted with no custom rom still rooted and most of my apps are unresponsive and close randomly except facebook and youtube.
I decided I wanted to return it to stock rom and try again but when I downloaded the stock tar file and tried to flash it I got this
I'm not sure what to do because I cant return it to stock rom, clockmod recovery has stopped working, and every video I watch about how to fix it is only making it worse.
If you have any idea what I can do or what I'm doing wrong let me know.

Odin failed because you cannot flash older firmware. Your best bet is to reflash recovery via Odin, then if you want stock go to enewman17's stock rom/system dump thread in development and flash the rom and factory reset.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

DocHoliday77 said:
Odin failed because you cannot flash older firmware. Your best bet is to reflash recovery via Odin, then if you want stock go to enewman17's stock rom/system dump thread in development and flash the rom and factory reset.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
I tried to flash cwm recovery onto my phone usb debugging selected and now odin doesnt even show that my phones recognized. This is so frustrating.

I suggest installing Philz Touch recovery via Odin and using Philz to flash a custom ROM to at least get your phone up and running.

devito35 said:
I tried to flash cwm recovery onto my phone usb debugging selected and now odin doesnt even show that my phones recognized. This is so frustrating.
Click to expand...
Click to collapse
If Kies is on your computer, remove it. Have you tried reinstalling drivers?
Sent from my SAMSUNG-SGH-I747 using Tapatalk