Develop Bugs

Phone keeps booting into Recovery Mode

I accidentally flashed the kernel for my old SGS II International to my Epic 4G Touch, but I managed to get it back to stock eventually. Everything was fine for the past couple months, and today I finally decided to install the system update(which I just put off for awhile despite all the prompts). Then it gave me that white triangle and when I rebooted into recovery mode. Now it just stays in recovery mode no matter what I do. Reboot option? Reboots back into recovery? Factory reset option? Boots back into recovery.
The ok button should be the power button right? This is a bit different from my old SGS

i would try pulling the battery and attempting to boot into download

yea, try & get into download mode... power off>vol dn+power until download mode is on the screen. then use ODIN/HEIMDALL to flash a stock tar file.

I should have mentioned that I did remove the battery and leave it out for a few minutes several times. It just kept booting back into recovery. I did eventually find the jig I made which was able to force it into download mode. But heimdall just keeps giving me this "ERROR: Claiming interface failed!" message even though it can detect the phone.

So no one has any idea what to do about this?

Did you try odin? If that fails put a rom(.zip) in sd card and flash from revovery.
Edit: if you are goin to switch from heimdall to odin you have to unistall heimdalls drivers. There are instructions on how to do this in heimdalls readme file.

javi_emma said:
Did you try odin? If that fails put a rom(.zip) in sd card and flash from revovery.
Edit: if you are goin to switch from heimdall to odin you have to unistall heimdalls drivers. There are instructions on how to do this in heimdalls readme file.
Click to expand...
Click to collapse
No, I didn't try Odin because I'm using OS X. I guess I'm going to have to make a windows boot partition. sigh
Well I guess I'll try to flash a rom from recovery first.

Well this is odd. It won't let me write anything to the sd card I normally use in it. It says it's read only. But uh....it always copied things fine if it was IN either this phone or my SGS II International when I tried to copy things.
I should just be able to put the rom on any micro SD card right? I have another 4 GB laying around here I can use if so.

Correct any sd should work!
Sent from my SPH-D710 using Tapatalk

And once again I highlight "apply update from sdcard" and hit the power button...just reboots into recovery mode for the millionth time without doing anything.

Gradius said:
And once again I highlight "apply update from sdcard" and hit the power button...just reboots into recovery mode for the millionth time without doing anything.
Click to expand...
Click to collapse
You may have to go the route of installing Odin and flashing a full stock tar that includes ROM, kernel, and modem so it overwrites everything in that one flash. I don't think it is something you can do by flashing in a recovery
Sent from my Nexus S 4G using xda premium

Gradius said:
And once again I highlight "apply update from sdcard" and hit the power button...just reboots into recovery mode for the millionth time without doing anything.
Click to expand...
Click to collapse
You have the stock recovery. That why. U can't flash an unsigned from from there. You are gonna have to Odin something. Either a full tar or maybe a kernel with cwm to flash something.
Sent from my Nexus S 4G using xda premium

Well anyone want to recommend/link me a tar? I'm making a windows partition right now so I can run Odin.
And yeah I figured it was because I put it back to stock that it wasn't working. But if it's back on stock why am I still getting the white triangle with the orange exclamation?

In fact if it's back to stock the past couple months and been working fine then why did it decide to screw up when I tried to install the OS update?

Gradius said:
In fact if it's back to stock the past couple months and been working fine then why did it decide to screw up when I tried to install the OS update?
Click to expand...
Click to collapse
The OTA updates are not always perfect. It is possible that there was something lingering from before. Let me try to find a link to a one click stock restore for you ...
Sent from my SPH-D710 using xda premium

Here is sfhub's EL29 full stock Gingerbread restore ...
http://forum.xda-developers.com/showthread.php?t=1433101
Sent from my SPH-D710 using xda premium

Haha, double post, haha
Sent from my SPH-D710 using Tapatalk

[Q] Cannot flash t889v modem on t889v

Hi I recently purchased a note II t889v, I didn't have a micro sim at the time to test it properly. I am stuck on edge:2 while on rogers. I then noticed that it had been flashed by the previous owner. So I looked around the forums.
Details:
-In download mode model is listed as sgh-t889v_NA_VTR
-I have tried to reflash to stock MCT T889VVLALJ4 gets stuck in boot loop
-extracted the modem.bin and flashed using odin and cwm flash. sometimes boots up to lock screen but crashes then reboots or freezes
-using t-mob t889 modem(T889UVALJ1_Modem.zip) allows me to start the and use the phone, but limits to edge:2
-IMEI is listed in the status
I'm trying to get the phone to connect to UMTS.
Any help or input would be appreciated thank you in advance.

Flash this modem http://d-h.st/qs1
Cheunk said:
Hi I recently purchased a note II t889v, I didn't have a micro sim at the time to test it properly. I am stuck on edge:2 while on rogers. I then noticed that it had been flashed by the previous owner. So I looked around the forums.
Details:
-In download mode model is listed as sgh-t889v_NA_VTR
-I have tried to reflash to stock MCT T889VVLALJ4 gets stuck in boot loop
-extracted the modem.bin and flashed using odin and cwm flash. sometimes boots up to lock screen but crashes then reboots or freezes
-using t-mob t889 modem(T889UVALJ1_Modem.zip) allows me to start the and use the phone, but limits to edge:2
-IMEI is listed in the status
I'm trying to get the phone to connect to UMTS.
Any help or input would be appreciated thank you in advance.
Click to expand...
Click to collapse

I have already tried flashing that modem also. I'm one of the 6 people who downloaded it lol. as soon as it was released by ptmr on his jedi 3 rom. gets stuck in boot loop also. only modem so far that didn't boot loop was the t-mobile modem t889.

Cheunk said:
I have already tried flashing that modem also. I'm one of the 6 people who downloaded it lol. as soon as it was released by ptmr on his jedi 3 rom. gets stuck in boot loop also. only modem so far that didn't boot loop was the t-mobile modem t889.
Click to expand...
Click to collapse
Does the phone have the correct imei... Look behind your battery and compare with about device menu
Sent from my SGH-T889 using xda premium

deeznutz1977 said:
Does the phone have the correct imei... Look behind your battery and compare with about device menu
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
Yes I have ch3cked the imei on the phone and battery also. They both match. Unless somehow the efs may be corrupted by the previous owner. I'm still boggled why I get stuck in boot loop flashing the modem meant for my phone.

boot back to recovery do the factory reset , reboot . This will help

simplelife said:
boot back to recovery do the factory reset , reboot . This will help
Click to expand...
Click to collapse
tried still stuck on boot loop. If it I flash the modem after I have started the system. without factory reset it get to the lockscreen then it reboots. after factory reset it doesn't even get to lockscreen.

Now try flash stock T889V via Odin . When in bootloop boot your note into recovery .Then factory reset , reboot.

simplelife said:
Now try flash stock T889V via Odin . When in bootloop boot your note into recovery .Then factory reset , reboot.
Click to expand...
Click to collapse
nope still stuck in a boot loop

Cheunk said:
nope still stuck in a boot loop
Click to expand...
Click to collapse
Can you explain step by step what you did.Thanks.

yup stuck in the loop too.

simplelife said:
Can you explain step by step what you did.Thanks.
Click to expand...
Click to collapse
1. downloaded the T889VVLALJ4_T889VYVLALJ4_MCT firmware from sammobile
2. downloaded odin 3.07
3. put phone into download mode using voldown+home+power
4. opened odin
5. plugged in usb.
6. waited for com to show up and looked for added msg.
7. clicked pda selected the T889VVLALJ4_T889VYVLALJ4_T889VVLALJ4_HOME.tar.md5 file
8. ensured auto boot and f reset only checked.
9. pressed start.
10. phone reboots into a boot loop
11. hold volup+home+power go into stock recovery and factory reset
12. reboot system
13. still in bootloop
also I don't know if this will help solve the issue. with odin I cannot flash any modems other than t889v(LJ4). whenever I try to flash t889(LJ1) modem it fails in odin but works when using CWM.

Cheunk said:
1. downloaded the T889VVLALJ4_T889VYVLALJ4_MCT firmware from sammobile
2. downloaded odin 3.07
3. put phone into download mode using voldown+home+power
4. opened odin
5. plugged in usb.
6. waited for com to show up and looked for added msg.
7. clicked pda selected the T889VVLALJ4_T889VYVLALJ4_T889VVLALJ4_HOME.tar.md5 file
8. ensured auto boot and f reset only checked.
9. pressed start.
10. phone reboots into a boot loop
11. hold volup+home+power go into stock recovery and factory reset
12. reboot system
13. still in bootloop
Click to expand...
Click to collapse
That exactly I did .I will test again when I home
Edit: I saw Mr.Robinson has root stock T889V firmware , you may give it a shot . Link to his thread :
http://forum.xda-developers.com/showthread.php?t=1975560

simplelife said:
That exactly I did .I will test again when I home
Edit: I saw Mr.Robinson has root stock T889V firmware , you may give it a shot . Link to his thread :
http://forum.xda-developers.com/showthread.php?t=1975560
Click to expand...
Click to collapse
I've also tried that one same result.

I just flash back to stock firmware via Odin without any issue. Honestly,dont know what go wrong at your side .
Hope someone more experience help here.

simplelife said:
I just flash back to stock firmware via Odin without any issue. Honestly,dont know what go wrong at your side .
Hope someone more experience help here.
Click to expand...
Click to collapse
I hope so too. I just don't understand why the phone won't boot up unless I use the t-mobile modem. but I only get stuck on edge:2

I just noticed that when I boot up after installing a stock rom I'm still rooted does that mean anything?

i get bootloop too on the t889v without the t889v mdm. so strange.

Cheunk said:
I just noticed that when I boot up after installing a stock rom I'm still rooted does that mean anything?
Click to expand...
Click to collapse
You will got root if you flash MrRobinson stock rom.

simplelife said:
You will got root if you flash MrRobinson stock rom.
Click to expand...
Click to collapse
I know. I'm talking about when I use the stock one from sammobile.

[Q] Sprint Note 2 (SPH-L900) Bricked after attempted 4.3 Update

I've been having issue with my Sprint Note 2 for a while. I've also posted this to Reddit and other parts of the forum but so far have gotten no way to fix my issue. Here's the link to Reddit: http://www.reddit.com/r/techsupport...nt_note_2_sphl900_bricked_after_attempted_43/
Sorry, I didn't want to type that all up again and having to deal with formatting and such.
Basically, the gist of it, from what I can gather is that I have accidentally loaded the 4.3 bootloader with KNOX and it is currently preventing me from doing anything productive (flashing CWMR, rooting, installing stock, etc). I read here on the forum that there were ways to do so, especially this post: http://forum.xda-developers.com/showthread.php?p=46861777
I was wondering if there were steps for the Sprint Note 2 SPH-L900?
Any help in debricking my phone is appreciated.

Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.

QuantumInteger said:
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.
Click to expand...
Click to collapse
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe

louforgiveno said:
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe
Click to expand...
Click to collapse
I tried 3.07, 3.09, and even barebone 1.85 that came with CF auto root. It doesn't work. I can't load recovery just fine (according to ODIN) but I can't get into Recovery.

Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone

Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse
...My God..... What ever you did, it worked. Turns out, Caboomi's file didn't work too well. I couldn't get CWMR working at all even after converting to .tar. I used TWRP instead and it works. Problem was that it asked me for my password, which I don't know since I tried everything, so I had to resort to wiping everything. I installed the file jlmancuso suggested, loading it onto SD card then flashing using TWRP, and now my Samsung Note 2 is debricked.
Your file was a godsend. Thank you!

No recovery stuck on bootloop
im having the same issue could you post that dropbox link again

So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse

rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader

Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MJA bootloader
Click to expand...
Click to collapse
MJA ? Isn't that an s4 bootloader?

louforgiveno said:
MJA ? Isn't that an s4 bootloader?
Click to expand...
Click to collapse
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out

my friend 's L900 bricked too ，but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ？ my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ？ from Pit ？ bootloader ？PDA ？PHONE ？ or others ？
Sent from my SPH-L900 using xda app-developers app
---------- Post added at 06:23 PM ---------- Previous post was at 06:14 PM ----------
Keithgordon said:
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out
Click to expand...
Click to collapse
my friend 's L900 bricked too ，but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ？ my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ？ from Pit ？ bootloader ？PDA ？PHONE ？ or others ？
Sent from my SPH-L900 using xda app-developers app

yea I still cant dowload it sorry for being a pest.
Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader
Click to expand...
Click to collapse

hello if you are online i need some help i dl the 4.3 note 2 update it has a different build than the one sprint has there are some features that are not on this build is there any way for me to get the ota from sprint
rckingws6 said:
yea I still cant dowload it sorry for being a pest.
Click to expand...
Click to collapse

rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.

QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse
i need some help

yea i can get into twrp recovery now but my sdcard wont mount thats why im trying to use odin
QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse

For those of you who have bricked Note 2s (SPH-L900), I'm going to drop a DropBox link here to a folder of ALL of the files that I used to unbrick my phone. I experimented with multiple methods (and several sleepless nights). Some of them will be useful to you, not all. I have the Android SDK and Caboomi's converter for .img to .tar. It doesn't work too well for CWMR just FYI. ODIN-OC will attempt to load stock MC2 onto your phone but it won't work if it's bricked. Arc Converter is a program I used to try convert the MK4 .zip file to .tar to try and flash an update using ODIN. It didn't work. The steps that I took to unbrick my phone will be posted after the link.
https://www.dropbox.com/sh/c2bfpfdf0qbs6bu/ZiNC-BF5kf
Be patient. Some of the files are still updating.
Steps:
1) Put your phone into Download mode by holding volume down + power + home button at bootup
2) Use ODIN (3.07 or 3.09) to load the 4.3_Unbrick.tar file. This will take a bit of time so be patient. Once the phone boots up again, you'll get past the boot screen that says "Samsung Galaxy Note II" and you'll get the Samsung logo with the spinning icon but it will loop. This is normal.
3) Next, power off (yank the battery and cable, leave battery out but plug the cable back in) and reboot into download.
4) Flash the TWRP .tar file (don't try converting the CWMR to .tar, it won't work) then reboot.
5) Hold volume up + power + home button (be patient here)
6) You should see the Team Win logo. You're now in recovery. The TWRP may ask you for the password. It is NOT the passcode to your lockscreen or your Google password. I have no idea what it is. At this point, you'd have to wipe your phone (internal only) if you want to flash the stock recovery.
7) Load the MC2 stock recovery file with counter reset onto a microSD card and mount it onto the phone (play around with TWRP, if it doesn't see the SD card the first time, restart or play with the mount function). Just be careful not to wipe your microSD card.
8) Flash the stock recovery (give it time) and it'll restart. You should be back at 4.1.2.
EXTRA STEPS
If you're still interested in 4.3, load the MK4 update onto the microSD card as well. BEFORE you go through the activation process for the 4.1.2 firmware at boot, boot into recovery. Flash the 4.3 update using stock recovery. This should put you onto 4.3 after the phone reboots. You should now have stock 4.3 (no root).

Sorry for all the download errors, I am uploading to my websight right now and as soon as it uploads, I will post the URL, it should download much faster too. I didnt realize so many people needed it

[Q] Sprint Note 2 hosed after flashing stuff

Note 2 Hangs at "SAMSUNG NOTE II" part of boot process.
- 1 year ago installed clockwork and rooted.
- a few days ago accepted OTA to 4.3 Android, lost root.
- Accidentally ODINed this ROM onto phone tonight root66_SPR_L900VPALJ1.tar.md5
- Hung on reboot at purple SAMSUNG boot screen
- Rebooted to clockwork tried "reset something (something like that)"
- It then booted and came up fine with Android 4.1.1. Everything seemed fine but of course I didn't want to be stuck at 4.1.1 and was pondering my next step when suddenly...
- Note 2 asked to apply OTA update (I think the 4.3 OTA was being tried again) I accepted thinking it might fix everything.
- After that it came up and hung at SAMSUNG NOTE II
- Tried rebooting to Clockwork, doesn't work at all now.
- I can ODIN various things including Clockwork, ODIN passes but nothing actually seems to work.
Stuck now.

I am wife of OP
wallywallywally said:
Note 2 Hangs at "SAMSUNG NOTE II" part of boot process.
Stuck now.
Click to expand...
Click to collapse
I am wife of OP, and usually get the fun of flashing the phones but I was working on my own at the time the above occurred. The only thing I can think of to fix the borked phone would be to get a decent stock rom image that can be flashed with ODIN. We can still put it in upload mode, but not into the bootloader menu. Anyone have a working link to an image that may work?

Try this.
Download stock mc2 with counter reset from development section and place on your external sdcard
1. Put phone in download/odin mode
2. Flash custom recovery but make sure the reboot option is not checked
3. After successful flash disconnect from pc and pull battery.
4. Reinstall battery while pressing vol+, menu, power. Should go into your recovery
5. Wipe everything (system, cache, data, internal storage)
6. Flash mc2 stock with counter reset
7. Reboot and you will be back on stock mc2 with stock recovery and firmware
8. Power off and boot into download/odin and flash your recovery
Now you can boot into recovery and flash whatever you want. If you want stock 4.3 dont use ota try one of the ones here on xda. If you want note 3 features use synergy r3 if you want plain stock use lorjays.
Sent from my SPH-L900 using XDA Premium 4 mobile app

MK4 (4.3) http://www.mediafire.com/download/7viivd985s7cp8l/L900VPUBMK4_L900SPTBMK4_HOME.tar.zip
Sent from my SPH-L900 using xda app-developers app

[Q] Note 2 bricked after 4.4 update, can't get into recovery

After trying to update to kit kat my note 2 will not get past the "note 2" splash screen. What sucks even worse is that I can't get into recovery to install a new rom. I've been searching tons of threads and whatnot across XDA and other websites but nothing has worked.
What I've tried:
-Flashing TWRP, CWM, Philz recoveries. Odin says they succeeded but I still can't get to any of them.
-Flashing srock roms downloaded from multiple sources. When I try this I get an error in odin, usually fails right after sboot.bin
-Using other versions of Odin, different usb's, etc. Same stuff happens no matter what.
-Kies, but it won't connect and says device is unsupported.
-Android toolkit, but i couldn't really do much with it in this state
-I even tried re-partitioning with some t0lte pit file. This really didn't change anything.
-I found an "mk4_recovery.tar" file in a thread on here. That finished and succeeded, but I still can't get anywhere, However I did notice that this changed the "current binary" on my phone from "custom" to "official samsung binary." I'm not sure if that is important or not.
I feel like I am running out of options and my phone is hard-bricked. You guys are my last hope and I'm hoping there's something you guys can help me with!! If you have anything I can try please let me know!!!

SCAND1UM said:
After trying to update to kit kat my note 2 will not get past the "note 2" splash screen. What sucks even worse is that I can't get into recovery to install a new rom. I've been searching tons of threads and whatnot across XDA and other websites but nothing has worked.
What I've tried:
-Flashing TWRP, CWM, Philz recoveries. Odin says they succeeded but I still can't get to any of them.
-Flashing srock roms downloaded from multiple sources. When I try this I get an error in odin, usually fails right after sboot.bin
-Using other versions of Odin, different usb's, etc. Same stuff happens no matter what.
-Kies, but it won't connect and says device is unsupported.
-Android toolkit, but i couldn't really do much with it in this state
-I even tried re-partitioning with some t0lte pit file. This really didn't change anything.
-I found an "mk4_recovery.tar" file in a thread on here. That finished and succeeded, but I still can't get anywhere, However I did notice that this changed the "current binary" on my phone from "custom" to "official samsung binary." I'm not sure if that is important or not.
I feel like I am running out of options and my phone is hard-bricked. You guys are my last hope and I'm hoping there's something you guys can help me with!! If you have anything I can try please let me know!!!
Click to expand...
Click to collapse
This happened to me today too. I didn't like the OTA 4.4 so I was trying to get a custom rom again. Thanks to jlmancuso he made the best solution here:
http://forum.xda-developers.com/showpost.php?p=53035491&postcount=287&nocache=1&z=4473536636214703
Simply download the attached file. It is BRICKED heaven! (worked for me.) and have your recovery (twrp, philz, cwm) file. And have Odin.
1) Extract all files fix / recovery (if haven't already) / and odin (again if haven't already)
2) Open Odin in PDA put in the "fix" file. BEFORE continuing, UNCHECK Auto Reboot. (HAS TO BE UNCHECKED)
3) Connect phone to computer
4) Once the file has finished (Odin will say pass) disconnect the phone.
DO NOT TAKE THE BATTERY OUT
5) Put it back in Recovery Mode (home / volume up / power )
Give it a minute and it will load a custom recovery.
If you were stuck at a bootloop you probably don't have a rom on your phone (cleaned and empty).
If so try flashing this in Odin as well (https://drive.google.com/file/d/0B0CWousOd0ntTHl2RmxPbHJWODQ/edit?usp=sharing}
When the custom recovery loads you can flash what you want.
Odin will not let you downgrade from NE2 to anything below (bootloader). I suggest flash over Philz and flash that way.
http://forum.xda-developers.com/showthread.php?t=2768847
Has a NE2 rooted already. Flash this and save a backup. YOU WILL NEED IT.
Once in the custom recovery that comes up I suggest to flash the M2 Stock with Count Reset. (back to complete stock) then can do what you want from there.
**If the custom recovery does not show up**
Repeat the steps above (Odin / add fix to PDA / Uncheck Auto Reboot / Connect Phone / start flash)
Then again DO NOT PULL BATTERY ... (once it shows pass) disconnect and reboot back in download mode ( home / volume down / power )
Flash over your recovery ... (do not pull battery) and try the Recovery Mode ... my first time I thought it was still stuck in bootloop so give it a second.

michael85tx said:
Once in the custom recovery that comes up I suggest to flash the M2 Stock with Count Reset. (back to complete stock) then can do what you want from there.
Click to expand...
Click to collapse
What a nightmare!
I odined back to stock MK4, did the 4.4.2 OTA last night. Then did the CF Auto Root via odin, installed custom recovery. The phone is currently on pageplus network. I started messing around, did the GSM Mod, then tried the international and domestic sim unlock procedures. The result was not satisfying, so I tried flashing different modems. Eventually CDMA works, but GSM not. So I made a huge mistake by attempting to downgrade from NE2. And of course failed. Now the phone can't register on either CDMA or GSM.
So once I flash M2 Stock with Count Reset, I can play with the 4.4.2 OTA zip again to get a 100% 4.4.2 system?

michael85tx said:
This happened to me today too. I didn't like the OTA 4.4 so I was trying to get a custom rom again. Thanks to jlmancuso he made the best solution here:
http://forum.xda-developers.com/showpost.php?p=53035491&postcount=287&nocache=1&z=4473536636214703
Simply download the attached file. It is BRICKED heaven! (worked for me.) and have your recovery (twrp, philz, cwm) file. And have Odin.
1) Extract all files fix / recovery (if haven't already) / and odin (again if haven't already)
2) Open Odin in PDA put in the "fix" file. BEFORE continuing, UNCHECK Auto Reboot. (HAS TO BE UNCHECKED)
3) Connect phone to computer
4) Once the file has finished (Odin will say pass) disconnect the phone.
DO NOT TAKE THE BATTERY OUT
5) Put it back in Recovery Mode (home / volume up / power )
Give it a minute and it will load a custom recovery.
If you were stuck at a bootloop you probably don't have a rom on your phone (cleaned and empty).
If so try flashing this in Odin as well (https://drive.google.com/file/d/0B0CWousOd0ntTHl2RmxPbHJWODQ/edit?usp=sharing}
When the custom recovery loads you can flash what you want.
Odin will not let you downgrade from NE2 to anything below (bootloader). I suggest flash over Philz and flash that way.
http://forum.xda-developers.com/showthread.php?t=2768847
Has a NE2 rooted already. Flash this and save a backup. YOU WILL NEED IT.
Once in the custom recovery that comes up I suggest to flash the M2 Stock with Count Reset. (back to complete stock) then can do what you want from there.
**If the custom recovery does not show up**
Repeat the steps above (Odin / add fix to PDA / Uncheck Auto Reboot / Connect Phone / start flash)
Then again DO NOT PULL BATTERY ... (once it shows pass) disconnect and reboot back in download mode ( home / volume down / power )
Flash over your recovery ... (do not pull battery) and try the Recovery Mode ... my first time I thought it was still stuck in bootloop so give it a second.
Click to expand...
Click to collapse
You, sir, helped the hell out of me! I thought my phone was screwed and I've already tried everything. Thank you soo much!
Just curious, did you ever get kitkat to work? I've tried going to MC2 stock then upgrading a couple more times but it ends up doing the bootloop again every time :/ did you ever get that to update?
I'm so glad to have a working phone now though! Thanks!

SCAND1UM said:
You, sir, helped the hell out of me! I thought my phone was screwed and I've already tried everything. Thank you soo much!
Just curious, did you ever get kitkat to work? I've tried going to MC2 stock then upgrading a couple more times but it ends up doing the bootloop again every time :/ did you ever get that to update?
I'm so glad to have a working phone now though! Thanks!
Click to expand...
Click to collapse
I did the procedure everything went well but is there any way to update lastest firmware kitkat as i tried to and keep having to do the same procedure to unbrick it? thanks

brooklynman2020 said:
I did the procedure everything went well but is there any way to update lastest firmware kitkat as i tried to and keep having to do the same procedure to unbrick it? thanks
Click to expand...
Click to collapse
The best way to do the upgrade (since you know how to get your phone back if it happens again) is to just simply use Odin now to flash the 4.4.2 tar file thanks to "garwynn" for taking the time in making it.
http://forum.xda-developers.com/showthread.php?t=2780984
since most of my links don't work after I post lol I'm giving the download too. I tried uploading it but the file size is too big to post. So I hope this link works let me know and I'll re-upload it and post another link if the link stops working. 4.4.2 stock rom .tar
---------- Post added at 03:05 AM ---------- Previous post was at 02:55 AM ----------
lilila said:
What a nightmare!
I odined back to stock MK4, did the 4.4.2 OTA last night. Then did the CF Auto Root via odin, installed custom recovery. The phone is currently on pageplus network. I started messing around, did the GSM Mod, then tried the international and domestic sim unlock procedures. The result was not satisfying, so I tried flashing different modems. Eventually CDMA works, but GSM not. So I made a huge mistake by attempting to downgrade from NE2. And of course failed. Now the phone can't register on either CDMA or GSM.
So once I flash M2 Stock with Count Reset, I can play with the 4.4.2 OTA zip again to get a 100% 4.4.2 system?
Click to expand...
Click to collapse
sorry for the late reply but yes you can. I have gone back and forth trying to decide which 4.4.2 works best for service and style. lol right now I'm on 4.4.2 stock rooted (took FOREVER to get rooted I think it just finally clicked in I had given up). but there's already a .tar file for 4.4.2 you can just flash the .tar file and you have a OTA STOCK (unrooted) version of 4.4.2 for SPRINT only. It's the easiest way to get your phone back to working if it' soft bricked or just won't load recovery.
...NOTE... you can UPGRADE flash your bootloader (i.e. ... M2 .. MK4 ...N2) from Odin. You just CAN NOT downgrade firmware via Odin if you're going to go back to 4.1/4.2/4.3 versions. You will 99% of the time get "failed" at write to sboot .. for recovery I recommend Philz as it clears your cache and such when you flash roms and gapps and such for you.
---------- Post added at 03:10 AM ---------- Previous post was at 03:05 AM ----------
SCAND1UM said:
You, sir, helped the hell out of me! I thought my phone was screwed and I've already tried everything. Thank you soo much!
Just curious, did you ever get kitkat to work? I've tried going to MC2 stock then upgrading a couple more times but it ends up doing the bootloop again every time :/ did you ever get that to update?
I'm so glad to have a working phone now though! Thanks!
Click to expand...
Click to collapse
You're welcome lol when it happened to me I wanted to punch a wall or something because I couldn't make a call to help me and there was no way Sprint would have helped me. It took me 8 hours to find it that day lol I had almost started giving up hope

You may already know this, but you also want to read up and see what versions of odin people are having success with. As well as what custom recoverys (and versions) seem to be working.
I used Odin v3.09 with no problems. Heard that others had success with v3.07
Flashed and running Philz custom recovery v6.0.4.5
I flashed update-supersu-v1.94.zip (originally flashed cwm-supersu-v0.94.zip, which DID NOT work). Supersu is a little buggy. On both the note2 and s3, after install apk would fc. Went to play store and updated supersu, supersu will then work (even "partially" disables knox for you)
Sent from my SPH-L710 using Xparent Cyan Tapatalk 2

g_money said:
You may already know this, but you also want to read up and see what versions of odin people are having success with. As well as what custom recoverys (and versions) seem to be working.
I used Odin v3.09 with no problems. Heard that others had success with v3.07
Flashed and running Philz custom recovery v6.0.4.5
I flashed update-supersu-v1.94.zip (originally flashed cwm-supersu-v0.94.zip, which DID NOT work). Supersu is a little buggy. On both the note2 and s3, after install apk would fc. Went to play store and updated supersu, supersu will then work (even "partially" disables knox for you)
Sent from my SPH-L710 using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
Yeah that's true I use Odin 3.09 Philz Recovery (latest version if that doesn't work the 6.07.09 has had some good success) and SU v1.93 is the one I have.

Stuck with 4.4.2 OTA
michael85tx said:
This happened to me today too. I didn't like the OTA 4.4 so I was trying to get a custom rom again. Thanks to jlmancuso he made the best solution here:
http://forum.xda-developers.com/showpost.php?p=53035491&postcount=287&nocache=1&z=4473536636214703
Simply download the attached file. It is BRICKED heaven! (worked for me.) and have your recovery (twrp, philz, cwm) file. And have Odin.
1) Extract all files fix / recovery (if haven't already) / and odin (again if haven't already)
2) Open Odin in PDA put in the "fix" file. BEFORE continuing, UNCHECK Auto Reboot. (HAS TO BE UNCHECKED)
3) Connect phone to computer
4) Once the file has finished (Odin will say pass) disconnect the phone.
DO NOT TAKE THE BATTERY OUT
5) Put it back in Recovery Mode (home / volume up / power )
Give it a minute and it will load a custom recovery.
If you were stuck at a bootloop you probably don't have a rom on your phone (cleaned and empty).
If so try flashing this in Odin as well (https://drive.google.com/file/d/0B0CWousOd0ntTHl2RmxPbHJWODQ/edit?usp=sharing}
When the custom recovery loads you can flash what you want.
Odin will not let you downgrade from NE2 to anything below (bootloader). I suggest flash over Philz and flash that way.
http://forum.xda-developers.com/showthread.php?t=2768847
Has a NE2 rooted already. Flash this and save a backup. YOU WILL NEED IT.
Once in the custom recovery that comes up I suggest to flash the M2 Stock with Count Reset. (back to complete stock) then can do what you want from there.
**If the custom recovery does not show up**
Repeat the steps above (Odin / add fix to PDA / Uncheck Auto Reboot / Connect Phone / start flash)
Then again DO NOT PULL BATTERY ... (once it shows pass) disconnect and reboot back in download mode ( home / volume down / power )
Flash over your recovery ... (do not pull battery) and try the Recovery Mode ... my first time I thought it was still stuck in bootloop so give it a second.
Click to expand...
Click to collapse
Followed this procedure after accepting OTA and couldn't get chainfire autoroot to work. This worked flawlessly for me and I'm flashing again !!!!

lewisyiv said:
Followed this procedure after accepting OTA and couldn't get chainfire autoroot to work. This worked flawlessly for me and I'm flashing again !!!!
Click to expand...
Click to collapse
Where is the fix file for download? I cant flash the tar file, all time show fail in odin, I was try with firmware 4.4.2, 4.2, 4.1.2 and nothing my note 2 enter in download mode but not in recovery mode, alwais is in bootloop in logo... maybe I have brick?

vegitamaster66 said:
Where is the fix file for download? I cant flash the tar file, all time show fail in odin, I was try with firmware 4.4.2, 4.2, 4.1.2 and nothing my note 2 enter in download mode but not in recovery mode, alwais is in bootloop in logo... maybe I have brick?
Click to expand...
Click to collapse
Two post above you or in the quote above you has the link for fix. You need to follow the first link (xda thread link) and it will take you to my post that has the upload.
Sent from my SPH-L900 using XDA Premium 4 mobile app

Second post in this thread helped me immensely. Thank you!
I broke my note 2 that I had rooted and was running rwilco's mostly stock rom on.
Got another note 2 off craigslist and decided I should root it too for speed and for tethering. Tried the liquid smooth rom and it failed leaving me with no ROM.
Every ROM I tried failed until I found this thread and used Odin to flash "ALL_SPT_L900VPUCNE2_L900SPTCNE2_1561791_REV04_user_low_ship.tar.md5" that was linked.
So phone is now running 4.4.2 can I safely try again to load a custom ROM?
What do I need to do to make sure I don't have the same problem?
I'm not really savvy with this stuff but I can follow destructions

does any of the above steps wipe internal data?