I woke up this morning to my phone perpetually rebooting.
I was running a nightly of CM 11.
Now when I try to go into Recovery I get a screen that asks for a password. I have no idea what that password is as I did not set one. I tried wiping data to no avail. I tried flashing a new recovery via Odin this did not work (Odin said successful but the screen on the phone never showed the transfer of the file). No matter what wipe method I use in recovery it just says fail, doesn't work at all and hangs or will say it can't mount. I have searched and searched and tried and tried and I'm stuck. I even tried ADB that didn't work either. Please help!
Try flashing Philz Touch (based on CWM) over TWRP via Odin. I have always had good luck with CWM and Philz.
Download the tar version: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
audit13 said:
Try flashing Philz Touch (based on CWM) over TWRP via Odin. I have always had good luck with CWM and Philz.
Download the tar version: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
Click to expand...
Click to collapse
I tried this already. I cannot flash ANYTHING via ODIN. Odin states that the process completed but the bar on the phone on the download screen never shows up to show that it has accepted a file.
therecker said:
I tried this already. I cannot flash ANYTHING via ODIN. Odin states that the process completed but the bar on the phone on the download screen never shows up to show that it has accepted a file.
Click to expand...
Click to collapse
Did you unchecked F . reset and unchecked auto reboot when you flashed recovery in Odin? After you flash the file you have to pull the battery then replace it and boot to recovery do not allow the phone to boot to OS or you have to flash again as your recovery will only stick if you pull the battery and boot to recovery after flashing it. After you get into it the first time all will be well with the world again you can flash your heart out.
I had twrp ask me for a password once I hit the back arrow key and told it to mount my external SD card then flashed my rom, bootloader, kernel and modem then rebooted no problem.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
theramsey3 said:
Did you unchecked F . reset and unchecked auto reboot when you flashed recovery in Odin? After you flash the file you have to pull the battery then replace it and boot to recovery do not allow the phone to boot to OS or you have to flash again as your recovery will only stick if you pull the battery and boot to recovery after flashing it. After you get into it the first time all will be well with the world again you can flash your heart out.
I had twrp ask me for a password once I hit the back arrow key and told it to mount my external SD card then flashed my rom, bootloader, kernel and modem then rebooted no problem.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
This did not work. When I use ODIN all that is happening is that ODIN says it has succeeded but the little progress bar that usually shows up on the phone when you are in download mode never comes up. I did try this method though and it didn't work.
I restarted the phone in ODIN mode then opened ODIN then connected the USB cable then unchecked the two boxes you mentioned then flashed a new non TWRP recovery then waited for ODIN to say successful then the phone never showed the progress bar so I waited 2 mins until I pulled the battery then I restarted phone directly to recovery and still have the password prompt. Even after hitting cancel I cannot interact with recovery because every option I choose just says fail. I cannot even mount external sd card.
What phone do you have? What was the most recent stock ROM on your phone? Maybe you can flash a stock ROM.
There is a copy of the stock Samsung 3e recovery (which we can't use to flash zips with) I'm curious if maybe it can overwrite what you have going on? On the password screen I wasn't hitting cancel I was simply hitting the back arrow key. I will see if I have a copy of the stock recovery, just maybe you can flash it then flash another recovery after that so you can fix your phone.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I have Samsung Galaxy S 3 At&T (d2att) SGH-I747 whichever one of those you want. The most recent stock rom on the phone was when I bought it brand new a few months after it came out. I tried installing a stock rom. I tried this using ODIN and it failed. The issue here is that TWRP somehow encrypted the entire file system so NOTHING at all in recovery works. When I use ODIN mode it never shows on my phone that it is accepting a transfer from the computer. When I tried the stock rom via ODIN method it actually failed in ODIN instead of telling me it succeeded and then just not work. It failed at the point when it says Firmware Update Start...aboot.mbn...NAND Write Start!...Complete(Write) operation failed. I am up for any suggestions but I need them to be detailed instructions because I have tried so many things I need to know what exact steps to follow.
I believe the aboot file is a bootloader. Did you ever have a stock 4.3 ROM on the phone? If you did, it probably has the stock 4.3 AT&T bootloader which cannot be downgraded without bricking the phone which means you cannot flash a ROM with an older bootloader via Odin.
audit13 said:
I believe the aboot file is a bootloader. Did you ever have a stock 4.3 ROM on the phone? If you did, it probably has the stock 4.3 AT&T bootloader which cannot be downgraded without bricking the phone which means you cannot flash a ROM with an older bootloader via Odin.
Click to expand...
Click to collapse
To my knowledge I never had a stock 4.3 ROM on the phone. The only stock ROM to touch this phone was the one that came on it. So be specific what are you actually suggesting in this post that I do?
therecker said:
To my knowledge I never had a stock 4.3 ROM on the phone. The only stock ROM to touch this phone was the one that came on it. So be specific what are you actually suggesting in this post that I do?
Click to expand...
Click to collapse
I am surprised that the aboot file was giving you a problem because the bootloader can be downgraded as long as it is not a 4.3 bootloader.
Do you recall exactly which ROM was on the phone when you got it? Where did you get the stock ROM?
audit13 said:
I am surprised that the aboot file was giving you a problem because the bootloader can be downgraded as long as it is not a 4.3 bootloader.
Do you recall exactly which ROM was on the phone when you got it? Where did you get the stock ROM?
Click to expand...
Click to collapse
It was a CM11 Nightly ROM from the very beginning of February. And before that it was a CM10.2 Stable ROM.
Which stock ROM was on your phone before you loaded a custom ROM?
audit13 said:
Which stock ROM was on your phone before you loaded a custom ROM?
Click to expand...
Click to collapse
I have no idea. It was when I first got the phone in November of 2012.
Sounds like your phone may be running a 4.3 bootloader which means your bootloader is locked and cannot be downgraded. This may explain why you are getting errors when trying to flash Odin. There is no stock AT&T 4.3 ROM that can be flashed via Odin.
Related
I've been having issue with my Sprint Note 2 for a while. I've also posted this to Reddit and other parts of the forum but so far have gotten no way to fix my issue. Here's the link to Reddit: http://www.reddit.com/r/techsupport...nt_note_2_sphl900_bricked_after_attempted_43/
Sorry, I didn't want to type that all up again and having to deal with formatting and such.
Basically, the gist of it, from what I can gather is that I have accidentally loaded the 4.3 bootloader with KNOX and it is currently preventing me from doing anything productive (flashing CWMR, rooting, installing stock, etc). I read here on the forum that there were ways to do so, especially this post: http://forum.xda-developers.com/showthread.php?p=46861777
I was wondering if there were steps for the Sprint Note 2 SPH-L900?
Any help in debricking my phone is appreciated.
Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.
QuantumInteger said:
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.
Click to expand...
Click to collapse
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe
louforgiveno said:
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe
Click to expand...
Click to collapse
I tried 3.07, 3.09, and even barebone 1.85 that came with CF auto root. It doesn't work. I can't load recovery just fine (according to ODIN) but I can't get into Recovery.
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse
...My God..... What ever you did, it worked. Turns out, Caboomi's file didn't work too well. I couldn't get CWMR working at all even after converting to .tar. I used TWRP instead and it works. Problem was that it asked me for my password, which I don't know since I tried everything, so I had to resort to wiping everything. I installed the file jlmancuso suggested, loading it onto SD card then flashing using TWRP, and now my Samsung Note 2 is debricked.
Your file was a godsend. Thank you!
No recovery stuck on bootloop
im having the same issue could you post that dropbox link again
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse
rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader
Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MJA bootloader
Click to expand...
Click to collapse
MJA ? Isn't that an s4 bootloader?
louforgiveno said:
MJA ? Isn't that an s4 bootloader?
Click to expand...
Click to collapse
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out
my friend 's L900 bricked too ，but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ？ my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ？ from Pit ？ bootloader ？PDA ？PHONE ？ or others ？
Sent from my SPH-L900 using xda app-developers app
---------- Post added at 06:23 PM ---------- Previous post was at 06:14 PM ----------
Keithgordon said:
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out
Click to expand...
Click to collapse
my friend 's L900 bricked too ，but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ？ my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ？ from Pit ？ bootloader ？PDA ？PHONE ？ or others ？
Sent from my SPH-L900 using xda app-developers app
yea I still cant dowload it sorry for being a pest.
Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader
Click to expand...
Click to collapse
hello if you are online i need some help i dl the 4.3 note 2 update it has a different build than the one sprint has there are some features that are not on this build is there any way for me to get the ota from sprint
rckingws6 said:
yea I still cant dowload it sorry for being a pest.
Click to expand...
Click to collapse
rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse
i need some help
yea i can get into twrp recovery now but my sdcard wont mount thats why im trying to use odin
QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse
For those of you who have bricked Note 2s (SPH-L900), I'm going to drop a DropBox link here to a folder of ALL of the files that I used to unbrick my phone. I experimented with multiple methods (and several sleepless nights). Some of them will be useful to you, not all. I have the Android SDK and Caboomi's converter for .img to .tar. It doesn't work too well for CWMR just FYI. ODIN-OC will attempt to load stock MC2 onto your phone but it won't work if it's bricked. Arc Converter is a program I used to try convert the MK4 .zip file to .tar to try and flash an update using ODIN. It didn't work. The steps that I took to unbrick my phone will be posted after the link.
https://www.dropbox.com/sh/c2bfpfdf0qbs6bu/ZiNC-BF5kf
Be patient. Some of the files are still updating.
Steps:
1) Put your phone into Download mode by holding volume down + power + home button at bootup
2) Use ODIN (3.07 or 3.09) to load the 4.3_Unbrick.tar file. This will take a bit of time so be patient. Once the phone boots up again, you'll get past the boot screen that says "Samsung Galaxy Note II" and you'll get the Samsung logo with the spinning icon but it will loop. This is normal.
3) Next, power off (yank the battery and cable, leave battery out but plug the cable back in) and reboot into download.
4) Flash the TWRP .tar file (don't try converting the CWMR to .tar, it won't work) then reboot.
5) Hold volume up + power + home button (be patient here)
6) You should see the Team Win logo. You're now in recovery. The TWRP may ask you for the password. It is NOT the passcode to your lockscreen or your Google password. I have no idea what it is. At this point, you'd have to wipe your phone (internal only) if you want to flash the stock recovery.
7) Load the MC2 stock recovery file with counter reset onto a microSD card and mount it onto the phone (play around with TWRP, if it doesn't see the SD card the first time, restart or play with the mount function). Just be careful not to wipe your microSD card.
8) Flash the stock recovery (give it time) and it'll restart. You should be back at 4.1.2.
EXTRA STEPS
If you're still interested in 4.3, load the MK4 update onto the microSD card as well. BEFORE you go through the activation process for the 4.1.2 firmware at boot, boot into recovery. Flash the 4.3 update using stock recovery. This should put you onto 4.3 after the phone reboots. You should now have stock 4.3 (no root).
Sorry for all the download errors, I am uploading to my websight right now and as soon as it uploads, I will post the URL, it should download much faster too. I didnt realize so many people needed it
Hello,
My unrooted At&T galaxy s3 will not go past the Samsung Galaxy SIII splash screen. When I enter recovery it just gives me a dead android guy.
I had this problem before and to fix it, I used odin to flash the stock 4.0.4, then I flashed 4.1.1 (I think these are the correct versions, I followed instructions here), then my phone wouldn't OTA update to touchwiz 4.3 so I flashed it using recovery mode using instructions and files I found here. The phone worked fine for a few weeks after that, but then started to reboot randomly and delete apps. Eventually it just stopped working all together which is where I am now.
I tried to install TWRP using odin which odin says worked but when I try to go to recovery mode I still just see the dead android guy. The phone did not have USB debugging mode turned on so I am not sure if I could install a custom recovery at all.
I tried the CF-auto root that I found here which got partway through and then failed.
Do you guys have any suggestions? Is there a stock touchwiz 4.3 rom that I could flash using odin??
Thank you very much, please let me know if you require any more information, I really want to get my phone working again.
korarchaeota said:
Hello,
My unrooted At&T galaxy s3 will not go past the Samsung Galaxy SIII splash screen. When I enter recovery it just gives me a dead android guy.
I had this problem before and to fix it, I used odin to flash the stock 4.0.4, then I flashed 4.1.1 (I think these are the correct versions, I followed instructions here), then my phone wouldn't OTA update to touchwiz 4.3 so I flashed it using recovery mode using instructions and files I found here. The phone worked fine for a few weeks after that, but then started to reboot randomly and delete apps. Eventually it just stopped working all together which is where I am now.
I tried to install TWRP using odin which odin says worked but when I try to go to recovery mode I still just see the dead android guy. The phone did not have USB debugging mode turned on so I am not sure if I could install a custom recovery at all.
I tried the CF-auto root that I found here which got partway through and then failed.
Do you guys have any suggestions? Is there a stock touchwiz 4.3 rom that I could flash using odin??
Thank you very much, please let me know if you require any more information, I really want to get my phone working again.
Click to expand...
Click to collapse
It almost sounds like you're dealing with a situation I'm having on my galaxy tab. It has the internal SD chip going bad. I had to use a rom specially made to boot from a partitioned external sd card. Sorry, I can't help more, but the symptoms seem similar.
Sent from my SCH-I800 using Tapatalk
Thank you for your reply. Where did you obtain a rom that could boot from the external sd card?
wrenhal said:
It almost sounds like you're dealing with a situation I'm having on my galaxy tab. It has the internal SD chip going bad. I had to use a rom specially made to boot from a partitioned external sd card. Sorry, I can't help more, but the symptoms seem similar.
Sent from my SCH-I800 using Tapatalk
Click to expand...
Click to collapse
Try flashing the TWRP again with Odin, but make sure the auto reboot option on the left is unchecked in Odin. After flashing, unplug the phone and then hold volume up + menu + power buttons at the same time until it reboots.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
shortydoggg said:
Try flashing the TWRP again with Odin, but make sure the auto reboot option on the left is unchecked in Odin. After flashing, unplug the phone and then hold volume up + menu + power buttons at the same time until it reboots.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I just tried it with only F. Reset Time checked, it installs it and says a green Pass!. I then unplugged it, tried to hold volume up + menu + power buttons for a while but nothing happened. I pulled the battery and then did volume up + menu + power buttons and went straight back to dead android guy. Any ideas?
Only other thing right now is to make sure you have the latest odin, which is 3.09
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
shortydoggg said:
Only other thing right now is to make sure you have the latest odin, which is 3.09
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Trying everything with the new version of Odin results in all the same results.
Does anyone know if there is a tar (Odin flashable) version of update43.zip found in this thread?
http://forum.xda-developers.com/showthread.php?t=2387423
Thanks!
korarchaeota said:
Trying everything with the new version of Odin results in all the same results.
Does anyone know if there is a tar (Odin flashable) version of update43.zip found in this thread?
http://forum.xda-developers.com/showthread.php?t=2387423
Thanks!
Click to expand...
Click to collapse
No there's no Odin flash-able there.
Sorry, we don't seem to have any answers for your problem. It seems like it may be more of a hardware issue than software.
Did you phone boot after flashing stock 4.04?
audit13 said:
Did you phone boot after flashing stock 4.04?
Click to expand...
Click to collapse
Yes it did, the first time that this started happening. But I was unable to do that again, I thought since I flashed all the way to 4.3 and I read that once you go to 4.3 you can't go back. Is that correct?
Thank you for your help. I was hoping to try an odin flashable touchwiz 4.3 but I can't seem to find one.
So you had 4.04 on your phone and you used OTA updates to get to 4.3? If this is correct, then you can't flash a stock AT&T 4.3 ROM because it has never been made available to the public; therefore, the only 4.3 ROMs that may work are based on the leaked AT&T 4.3 ROM or compiled from an OTA update.
Once of these ROMs may get your phone going again: http://forum.xda-developers.com/showthread.php?t=2498233
audit13 said:
So you had 4.04 on your phone and you used OTA updates to get to 4.3? If this is correct, then you can't flash a stock AT&T 4.3 ROM because it has never been made available to the public; therefore, the only 4.3 ROMs that may work are based on the leaked AT&T 4.3 ROM or compiled from an OTA update.
Once of these ROMs may get your phone going again: http://forum.xda-developers.com/showthread.php?t=2498233
Click to expand...
Click to collapse
Thank you for your suggestion, all the ones I tried there need recovery to flash...not odin. Is it possibly to make an odin file from a recovery flash file??
Thanks!
korarchaeota said:
Thank you for your suggestion, all the ones I tried there need recovery to flash...not odin. Is it possibly to make an odin file from a recovery flash file??
Thanks!
Click to expand...
Click to collapse
Did you try installing Philz Touch from Odin? As was suggested earlier, don't use auto reboot. Once Philz has been installed and you see Reset in the window, disconnect the USB cable, remove the battery, replace the battery, boot into recovery, wipe and flash a custom ROM. This may help you get your phone working for now.
audit13 said:
Did you try installing Philz Touch from Odin? As was suggested earlier, don't use auto reboot. Once Philz has been installed and you see Reset in the window, disconnect the USB cable, remove the battery, replace the battery, boot into recovery, wipe and flash a custom ROM. This may help you get your phone working for now.
Click to expand...
Click to collapse
Thank you for your suggestion, but I still get the dead android guy after flashing and trying to go into recovery. Any other ideas??
korarchaeota said:
Thank you for your suggestion, but I still get the dead android guy after flashing and trying to go into recovery. Any other ideas??
Click to expand...
Click to collapse
Did you try philz or cwm? I am not sure why stock recovery is not being overwritten.
audit13 said:
Did you try philz or cwm? I am not sure why stock recovery is not being overwritten.
Click to expand...
Click to collapse
I tried twrp and philz, I haven't tried cwm yet, should I? Is it not working because I didn't enable USB debugging before it stopped working?
Thanks for your help!
korarchaeota said:
I tried twrp and philz, I haven't tried cwm yet, should I? Is it not working because I didn't enable USB debugging before it stopped working?
Thanks for your help!
Click to expand...
Click to collapse
Nope, USB debugging will not make a difference.
The latest Philz Touch is based on the latest CWM. After your flash Philz, are you letting the phone auto reboot on its own after flashing in Odin?
I know of no way to convert a custom ROM so it can be flashed in Odin.
I have PayPal for which I will use to donate an amount to the person(s) who can help me.
I just recently got a new GS4 becuase of an insurance replacement. I looked at the specs before I flashed TWRP. After failing to install 4.2.2 ROMS, I finally found a 4.3 mk2 stock ROM to install. I have the phone working. But TWRP is not installed. My phone tests positive for ROOT with Rootchecker
Currently I'm getting this message everytime I boot "Kernel is not seandroid enforcing"
I have multiple 4.4.2 and 4.3 ROMs I like to use on my SD card, I'd like to continue from a TWRP backup i've made using that recovery.
Here are my current specs:
Model
SGH-M919
Android Version
4.3
Baseband
M919UVUEMK2
Kernel Version
[email protected] #1
Build Number
JSS15J.M919UVUEMK2
SELinux status
Permissive
Secure boot status
Type: Samsung
The replacement phone was probably already on the MK2 bootloader and modem when you received it. Which means you had Knox pre-installed and tripped it when you rooted the phone. The "kernel is not seandroid enforcing" error message does not affect the functioning of your phone in any way. It's just a part of the Knox bootloader. You can continue to re-install TWRP recovery and flash any ROM you want. Your phone will function as normal. Just don't try reverting to the 4.2.2 MDL baseband/modem because it won't work. There's currently no way to revert to 4.2.2 MDL if you're on MK2 or higher. If you want to get rid of the message just flash the stock kernel in a recovery.
Try to be careful with your replacement phone now since you tripped Knox. It might be harder to get a replacement depending on how T-Mobile is.
No donations are needed for these kinds of things.
Ok Im flashing Infamous 4.4.2 Version 3.7 after ODIN flashing TWRP 2.6.3.1
The only reason I'm flashing that ROM is because no backups are not showing theirselvesin the Restore option, what would cause that?
Is TWRP 2.5.0.2 better?
Did I miss a step? All my actions were using odin to flash the twrp recover, and then flash another ROM, or restoring a Previous Back. Should I have flashed a rooted bootloader, or rooted firmware or anything besides those two?
nopotential said:
Ok Im flashing Infamous 4.4.2 Version 3.7 after ODIN flashing TWRP 2.6.3.1
The only reason I'm flashing that ROM is because no backups are not showing theirselvesin the Restore option, what would cause that?
Is TWRP 2.5.0.2 better?
Click to expand...
Click to collapse
The backups could either be stored on the internal or external SD card. Try switching between both and see if they appear. They'll be in the TWRP folder on the root of either the internal/external storage.
I've had no problems with the latest TWRP v2.7.0.1. If you have problems then use v2.5.0.2.
If you have connection problems after installing Infamous 4.4.2, you might need to Odin the newest KitKat NB4 modem found here.
Download the file and flash MODEM.bin via Odin under the phone slot.
Personally, since you already tripped Knox, you should just Odin flash the complete NB4 KitKit stock ROM which will give you the newest modem without having to mess with anything else or do various flashing of things. Everything for flashing NB4 KitKit can be found here. Download the full 4.4 firmware from here.
brian117 said:
The backups could either be stored on the internal or external SD card. Try switching between both and see if they appear. They'll be in the TWRP folder on the root of either the internal/external storage.
I've had no problems with the latest TWRP v2.7.0.1. If you have problems then use v2.5.0.2.
If you have connection problems after installing Infamous 4.4.2, you might need to Odin the newest KitKat NB4 modem found here.
Download the file and flash MODEM.bin via Odin under the phone slot.
Personally, since you already tripped Knox, you should just Odin flash the complete NB4 KitKit stock ROM which will give you the newest modem without having to mess with anything else or do various flashing of things. Everything for flashing NB4 KitKit can be found here. Download the full 4.4 firmware from here.
Click to expand...
Click to collapse
I want to use a custom ROM because of the features. Should I still flash the latest firmware, the KitKat NB4?
nopotential said:
I want to use a custom ROM because of the features. Should I still flash the latest firmware, the KitKat NB4?
Click to expand...
Click to collapse
You will still be able to flash the custom ROM after you Odin flash the KitKat NB4 firmware. The steps are as followed:
1. Open Odin v3.07.
2. UNcheck the boxes that say auto reboot and f. reset time.
3. Power off your phone and enter Download Mode by holding down the Vol DOWN + Home + Power buttons at the same time. Hit Vol UP after the warning message comes up.
4. Connect your phone to your PC and wait for it to appear in the COM: box in Odin.
5. Click the PDA tab and select the "M919UVUFNB4_HOME.tar.md5" file that you extracted from http://www.cheatersedge.org/android/m919/M919UVUFNB4_M919TMBFNB4_TMB_FENNY_FIXED.zip.
6. Wait for it to run an MD5 check. The program will freeze and unfreeze when it's done.
7. Click start and let Odin flash the ROM.
8. When it says PASS, unplug the phone and long press the power button until the phone turns off and reboots on its own. Leave it alone for about 2 minutes and then power it off.
9. Reboot back into Download Mode and then flash the CF-Autoroot found here.
10. Flash that via the PDA slot in Odin, reboot, and you should now be rooted. You can then continue to do everything else such as install TWRP and flash Infamous 4.4.2.
brian117 said:
You will still be able to flash the custom ROM after you Odin flash the KitKat NB4 firmware. The steps are as followed:
1. Open Odin v3.07.
2. UNcheck the boxes that say auto reboot and f. reset time.
3. Power off your phone and enter Download Mode by holding down the Vol DOWN + Home + Power buttons at the same time. Hit Vol UP after the warning message comes up.
4. Connect your phone to your PC and wait for it to appear in the COM: box in Odin.
5. Click the PDA tab and select the "M919UVUFNB4_HOME.tar.md5" file that you extracted from http://www.cheatersedge.org/android/m919/M919UVUFNB4_M919TMBFNB4_TMB_FENNY_FIXED.zip.
6. Wait for it to run an MD5 check. The program will freeze and unfreeze when it's done.
7. Click start and let Odin flash the ROM.
8. When it says PASS, unplug the phone and long press the power button until the phone turns off and reboots on its own. Leave it alone for about 2 minutes and then power it off.
9. Reboot back into Download Mode and then flash the CF-Chain's Autoroot found here.
10. Flash that via the PDA slot in Odin, reboot, and you should now be rooted. You can then continue to do everything else such as install TWRP and flash Infamous 4.4.2.
Click to expand...
Click to collapse
Thanks for the step by step. I'm following it now. The NB4_HOME.tar.md5 is taking a long time to flash with ODIN. But I will follow it closely, if everything looks good I'll send out a donation, I appreciate your help.
nopotential said:
Thanks for the step by step. I'm following it now. The NB4_HOME.tar.md5 is taking a long time to flash with ODIN. But I will follow it closely, if everything looks good I'll send out a donation, I appreciate your help.
Click to expand...
Click to collapse
Like I said donations are not needed. It does take a while for it to flash through Odin so that's normal.
It was boot looping, went into optimizing apps to something about media database multiple times. I went into the stock recovery and cleared cache and factory reset. It's trying to boot now.
nopotential said:
It was boot looping, went into optimizing apps to something about media database multiple times. I went into the stock recovery and cleared cache and factory reset. It's trying to boot now.
Click to expand...
Click to collapse
My Wifi is unable to be turned on in this stock rom. I'm going to flash TWRP and then Infamous
nopotential said:
It was boot looping, went into optimizing apps to something about media database multiple times. I went into the stock recovery and cleared cache and factory reset. It's trying to boot now.
Click to expand...
Click to collapse
Yes that will happen. You just boot into recovery and factory reset and it will boot. Let me know if that works.
nopotential said:
My Wifi is unable to be turned on in this stock rom. I'm going to flash TWRP and then Infamous
Click to expand...
Click to collapse
If you continue to have WiFi problems, flash this via recovery.
brian117 said:
Yes that will happen. You just boot into recovery and factory reset and it will boot. Let me know if that works.
If you continue to have WiFi problems, flash this via recovery.
Click to expand...
Click to collapse
It looks like everything is looking good by following your list. Thank you.
nopotential said:
It looks like everything is looking good by following your list. Thank you.
Click to expand...
Click to collapse
Awesome! Good to hear man. Enjoy KitKat and the newest modem. The new modem has gave a significant reception boost for a lot of people. Hope it's the same for you. And please check your PM.
-Deleted-
So I was able to root phone on w/o issue. I installed CWM via play store then proceeded to attempted to load Cyanogen mod via zip..and oh yeah I didn't wipe phone prior so....Now I have infinite loop issue at boot. I've searched the interwebs looking for any way to get back to stock or anything so I'll be able to use the phone again but have come up short every time. I've tried using ODIN to flash stock image but that fails. I've tried various .tar, .tz and anything else that odin will load w/o success. Will anyone take pity on my stupid ass and lens a hand?
exarkun631 said:
So I was able to root phone on w/o issue. I installed CWM via play store then proceeded to attempted to load Cyanogen mod via zip..and oh yeah I didn't wipe phone prior so....Now I have infinite loop issue at boot. I've searched the interwebs looking for any way to get back to stock or anything so I'll be able to use the phone again but have come up short every time. I've tried using ODIN to flash stock image but that fails. I've tried various .tar, .tz and anything else that odin will load w/o success. Will anyone take pity on my stupid ass and lens a hand?
Click to expand...
Click to collapse
Are you able to boot in recovery? (volume up + home + power). You could wipe and try flashing again (the first boot does take a while).
As for Odin, make sure you're using the right image (.tar) if recovery doesn't work.
Here's a little Odin guide: [ODIN] Desktop ODIN ver 3.07 for use with Samsung Galaxy S III
yeah I tried that
BWolf56 said:
Are you able to boot in recovery? (volume up + home + power). You could wipe and try flashing again (the first boot does take a while).
As for Odin, make sure you're using the right image (.tar) if recovery doesn't work.
Here's a little Odin guide: [ODIN] Desktop ODIN ver 3.07 for use with Samsung Galaxy S III
Click to expand...
Click to collapse
So I am able to boot into recovery but it's the stock recovery, not the one I intalled after root.
I've tried flashing stock images, custom images, CWM, TWRP, .TARs all w/o success. In ODIN I've flashed CWM and TWRP and it reports success but upon reboot it goes back to stock recovery and shows now 13 attempts to load custom firmware. I even tried to use Cyanogen,s windows app but even that gets stuck saying it can't communicate w/device. I've tried several driver, hiemdal, (which I can't figure out). What I'd like to do wipe EVERYTHING, like format the phone but I can't seem to remove the Samsung boot loader. Is my phone beyond repair? I'm super bummed, esp since I'm not a total noob when it comes to custom ROMs. I dropped greenpoison on my fist iPhone and had several ROMs on my old Moto Atrix. I think whatever evil Samsiung put on this device is totally screwing me.
exarkun631 said:
So I've tried flashing stock images, custom images, CWM, TWRP, .TARs all w/o success. In ODIN I've flashed CWM and TWRP and it reports success but upon reboot it goes back to stock recovery and shows now 13 attempts to load custom firmware. I even tried to use Cyanogen,s windows app but even that gets stuck saying it can't communicate w/device. I've tried several driver, hiemdal, (which I can't figure out). What I'd like to do wipe EVERYTHING, like format the phone but I can't seem to remove the Samsung boot loader. Is my phone beyond repair? I'm super bummed, esp since I'm not a total noob when it comes to custom ROMs. I dropped greenpoison on my fist iPhone and had several ROMs on my old Moto Atrix. I think whatever evil Samsiung put on this device is totally screwing me.
Click to expand...
Click to collapse
Try with a different stock image (debloated if you want a smaller download).
Also, Heimdall installs its own drivers, therefor Odin won't work on the same usb port you've installed Heimdall on.
Even in stock recovery, you should be able to do a factory reset (I think). Chances are that your ROM is corrupted atm though, you can try doing a factory reset and attempt boot. If that doesn't work, go the Odin way.
Bootloaders are not something to play with, it's the only way to hard-brick your phone (and you definitively don't wanna remove those nor stop Odin while it's flashing them, if the .tar contains them).
what about...
BWolf56 said:
Try with a different stock image (debloated if you want a smaller download).
Also, Heimdall installs its own drivers, therefor Odin won't work on the same usb port you've installed Heimdall on.
Even in stock recovery, you should be able to do a factory reset (I think). Chances are that your ROM is corrupted atm though, you can try doing a factory reset and attempt boot. If that doesn't work, go the Odin way.
Bootloaders are not something to play with, it's the only way to hard-brick your phone (and you definitively don't wanna remove those nor stop Odin while it's flashing them, if the .tar contains them).
Click to expand...
Click to collapse
I updated the phone via ota to latest android (4.3 ?). And I think the stock image I tried using was 4.1.x. Could it be I need to find a stock 4.3.x image from at&t? Any idea where to get this? I don't think AT&T provides ythis as that is where I got the previous stock image.
exarkun631 said:
I updated the phone via ota to latest android (4.3 ?). And I think the stock image I tried using was 4.1.x. Could it be I need to find a stock 4.3.x image from at&t? Any idea where to get this? I don't think AT&T provides ythis as that is where I got the previous stock image.
Click to expand...
Click to collapse
Can you check if the image you used had bootloaders? Cause if so, you might have bricked your phone. You can't downgrade bootloaders from 4.3.
The image can be found here or on sammobile.com
Strange
So after flashing my i747 30x via ODIN w/various .tar for boot and recoveries I was briefly able to boot into CWM. Stupidly, I selected the format option and foolishly restarted, intending to boot back into CWM and flash a .zip image. Once I restarted I was locked out of CWM again and can only boot into stock recovery once again. What am I doing wrong? I just can't wrap my head around why every time I flash a custom recovery like CWM or TWRP or Philz's_Touch in OdIn and it reports success, when I restart it just loads Samsung's ****ty stock recovery. I still can't flash a ROM via ODIN but I'm hoping if I can get back into CWM I'll be able to load a new ROM and use my phone again. Anyhelp would be great.
BWolf56 said:
Can you check if the image you used had bootloaders? Cause if so, you might have bricked your phone. You can't downgrade bootloaders from 4.3.
The image can be found here or on sammobile.com
Click to expand...
Click to collapse
lol
exarkun631 said:
So after flashing my i747 30x via ODIN w/various .tar for boot and recoveries I was briefly able to boot into CWM. Stupidly, I selected the format option and foolishly restarted, intending to boot back into CWM and flash a .zip image. Once I restarted I was locked out of CWM again and can only boot into stock recovery once again. What am I doing wrong? I just can't wrap my head around why every time I flash a custom recovery like CWM or TWRP or Philz's_Touch in OdIn and it reports success, when I restart it just loads Samsung's ****ty stock recovery. I still can't flash a ROM via ODIN but I'm hoping if I can get back into CWM I'll be able to load a new ROM and use my phone again. Anyhelp would be great.
Click to expand...
Click to collapse
So I think I figured out what I did wrong. Recovery mode = pwr+home+VolUp...Download mode = Pwr+home+VolDown. What an a$$hole I am, I thought Download mode and Recovery were one in the same and flashing TWRP or CWM would replace download mode. Once I figured out that one it was a simple matter to boot into recovery and wipe the drive then flash my rom (Omni 4.4.2 D2att) IDK if it's the rom or all the screwing around I did but it now takes no less than 10 min to boot into android from rom splash. Tried updating Kernel to latest but found it didn't fix problem.
exarkun631 said:
So I think I figured out what I did wrong. Recovery mode = pwr+home+VolUp...Download mode = Pwr+home+VolDown. What an a$$hole I am, I thought Download mode and Recovery were one in the same and flashing TWRP or CWM would replace download mode. Once I figured out that one it was a simple matter to boot into recovery and wipe the drive then flash my rom (Omni 4.4.2 D2att) IDK if it's the rom or all the screwing around I did but it now takes no less than 10 min to boot into android from rom splash. Tried updating Kernel to latest but found it didn't fix problem.
Click to expand...
Click to collapse
Did you do a clean flash? Sounds like you didn't factory reset.
Make sure you backup your apps before doing so if you wanna keep your app data.
I have a Samsung Galaxy S3 AT&T and for about a year and a half always wanted to root it but had no idea how. I had an iPhone a while back and used to jailbreak it I became an expert at it. Rooting is not so easy compared at least with the problems I've been experiencing
I started by watching hundreds of root videos and ended up rooting it with Odin and Kit Kat tar file im not sure of the specific file but I'm almost 100% it was my version 4.4.2 that I flashed.
After I did this I downloaded the basics and tried to get TWRP but gooManager wasnt working for some reason.
I tried to flash the Cyanongen 11 onto my phone using the installer for the comp and on google play store and it worked up until the end I got the dead droid symbol for a bit and it finished downloading to show the "ROM may flash stock recover on boot. Fix?" error message and I selected no and "Root Access Possibly Lost Fix?" I also selected no. My phone booted with no custom rom still rooted and most of my apps are unresponsive and close randomly except facebook and youtube.
I decided I wanted to return it to stock rom and try again but when I downloaded the stock tar file and tried to flash it I got this
I'm not sure what to do because I cant return it to stock rom, clockmod recovery has stopped working, and every video I watch about how to fix it is only making it worse.
If you have any idea what I can do or what I'm doing wrong let me know.
Odin failed because you cannot flash older firmware. Your best bet is to reflash recovery via Odin, then if you want stock go to enewman17's stock rom/system dump thread in development and flash the rom and factory reset.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
DocHoliday77 said:
Odin failed because you cannot flash older firmware. Your best bet is to reflash recovery via Odin, then if you want stock go to enewman17's stock rom/system dump thread in development and flash the rom and factory reset.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
I tried to flash cwm recovery onto my phone usb debugging selected and now odin doesnt even show that my phones recognized. This is so frustrating.
I suggest installing Philz Touch recovery via Odin and using Philz to flash a custom ROM to at least get your phone up and running.
devito35 said:
I tried to flash cwm recovery onto my phone usb debugging selected and now odin doesnt even show that my phones recognized. This is so frustrating.
Click to expand...
Click to collapse
If Kies is on your computer, remove it. Have you tried reinstalling drivers?
Sent from my SAMSUNG-SGH-I747 using Tapatalk