Related
ATT S3 stuck at the Samsung galaxy 3 logo, i tried to use Odin and flash but it wont work (stuck at system) and I cant access my recovery mode. I try to go into recovery mode but it just reboot and goes back to the logo.
The only thing I can access is DL to try to flash it through Odin but It just not working , I tried the original update from samsung and the jelly bean and it keep getting stuck in the loading system.
please advice , I am desperate.
Are you trying to flash back to stock?
I went through this the other day. Boot into the stock recovery and do a factory reset. Wipe User Data/Factory Reset I believe is the actual option.
Should boot fine after that.
*nevermind... didnt read it properly, obviously wont work if you cant get into recovery... my bad
Sent from my SGH-I747M using Tapatalk 2
jeserguevara said:
ATT S3 stuck at the Samsung galaxy 3 logo, i tried to use Odin and flash but it wont work (stuck at system) and I cant access my recovery mode. I try to go into recovery mode but it just reboot and goes back to the logo.
The only thing I can access is DL to try to flash it through Odin but It just not working , I tried the original update from samsung and the jelly bean and it keep getting stuck in the loading system.
please advice , I am desperate.
Click to expand...
Click to collapse
Try this metod to get bact to stock. Read frist before you try.
BobSlob said:
Are you trying to flash back to stock?
I went through this the other day. Boot into the stock recovery and do a factory reset. Wipe User Data/Factory Reset I believe is the actual option.
Should boot fine after that.
Sent from my SGH-I747M using Tapatalk 2
Click to expand...
Click to collapse
I cant acces recovery mode at all! everytime , I do the volume up,power , home it just reboot and goes back to the samsung logo.
jeserguevara said:
I cant acces recovery mode at all! everytime , I do the volume up,power , home it just reboot and goes back to the samsung logo.
Click to expand...
Click to collapse
You can try using kies recovery.
Sent from my SAMSUNG-SGH-I747 using xda premium
Intub8 said:
You can try using kies recovery.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Or ADB command.
Have you tried: vol up+home and then adding power? When I do the 3 at the same time, it doesn't seem to always work but that way does. Just a shot in the dark.
BWolf56 said:
Or ADB command.
Have you tried: vol up+home and then adding power? When I do the 3 at the same time, it doesn't seem to always work but that way does. Just a shot in the dark.
Click to expand...
Click to collapse
not working boss,on my samsung wave 2
Looks like you may be soft bricked. You can always send it off to JTag for repair. This guy on eBay does it for $35 and he has 700+ sales with a 100% satisfaction rating http://item.mobileweb.ebay.com/viewitem?itemId=271160547396
If you can get into dl mode you can fix it. And make sure that you are trying to get into recovery the right way. I know in times of frustration getting into recovery can be annoying. ...a few deep breaths wait a little while then try for recovery. If not. .. down load the newest odin, erase and down load New drivers for your phone and attempt odin again, Flash stock rooted.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I am having similar issues i'm able to get into download and keis will begin emergency recovery but both options fail at system.img.ext4
recovery is un available and outs me into connect to keis screen which is download ot keis download.
would any one have a stock recovery of original DLK3 that would be for odin, or a location to download it. keis said if I could get into stock recovery....
thankx
i'm not even stressed yet I went thru this once with my captivate and I got out of that one.
I think that running kies and odin at the same time can disrupt odin. Not 100% on that but I always disabled or removed it first as per something I had read. Also if you have been running anything using ADB on your PC, use the task manager to make sure it is not still running in the processes. It has caused me problems getting a connection to the phone to stick.
[[SOLVED]]
Alright, so I checked through a few pages on the forums, and I didn't see anyone posting about this issue I am having..
I purchased my S3 a few days ago, and instantly rooted it. I used the Odin3 v3.07 method with "root66_SPR_L10VPBLJ7.7Z" ROM. That went well and fine. Then I tried flashing CWM recovery, and when I booted into recovery, it was still the stock. So I downloaded ROM Mangager and flashed the touch CWM recovery, after it finished, it asked if I wanted to boot into recovery. I agreed. Then the phone restarted, and upon starting, it showed the SAMSUNG logo, and "recovery booting" in the top left corner for about half a second. Then it just stayed on a black screen. I could do nothing after that. I then took the battery out for about 5 minutes, threw it back in, and the phone started. So I tried to manually boot into recovery, and the same issue. Took the battery out again, phone started properly, so I then tried to get into download mode. That worked fine, so I downloaded the CWM recovery on my laptop, and connected the phone through Odin, and flashed CWM onto my phone. Odin said it passed, but I still have the same issue when I try to boot into recovery.
Any ideas on something I'm doing wrong?
It is likely that your ROM is detecting the custom recovery and replacing it with the stock one. This was a change made to the stock ROM several versions ago. Before that you did not have to do anything extra to load the custom recovery.
The versions LG8 and later have code to detect an unsigned recovery and replace it with stock. You need to:
- Download TeamEpic-Root-from-Recovery-v5.zip and place it on your ineternal sdcard.
- Get into Download Mode and connect ODIN.
- Flash the custom recovery with ODIN but do not check the "Auto Reboot" box in Odin.
- Disconnect the phone from the PC once the recovery is flashed.
- Pull the battery to power down
- Boot directly into recovery (Hold Volume Up, Home and Power buttons until recovery appears. Do not allow the ROM to start).
- Once in the recovery you need to flash the Team Epic Root from Recovery.
- Reboot
All Done
m20120 said:
It is likely that your ROM is detecting the custom recovery and replacing it with the stock one. This was a change made to the stock ROM several versions ago. Before that you did not have to do anything extra to load the custom recovery.
The versions LG8 and later have code to detect an unsigned recovery and replace it with stock. You need to:
- Download TeamEpic-Root-from-Recovery-v5.zip and place it on your ineternal sdcard.
- Get into Download Mode and connect ODIN.
- Flash the custom recovery with ODIN but do not check the "Auto Reboot" box in Odin.
- Disconnect the phone from the PC once the recovery is flashed.
- Pull the battery to power down
- Boot directly into recovery (Hold Volume Up, Home and Power buttons until recovery appears. Do not allow the ROM to start).
- Once in the recovery you need to flash the Team Epic Root from Recovery.
- Reboot
All Done
Click to expand...
Click to collapse
Correct; and the reason for this is because the updated stock firmware as a script basically that re-flashes stock recovery upon boot if stock isn't detected. The team epic zip removes that. After doing that; I'd recommend flashing the twrp recovery.
Need some Help!
Ok guys got a problem! I have a new Samsung Galaxy Sprint S3 SPH-L710 4.1.1 and I flashed CMW ROM and did not do a back up of the stock OS. The phone still works with the ROM that I flashed cm-10.1m1. I already know befor you say it dumb right! Lol I'm kicking myself because I know better. I need help finding a mirror of the stock OS with all the drivers and kernels! Can anyone help out, thanks. :crying:
Re: [Q] Recovery Broken, Need Help
shadowcop9514 said:
Ok guys got a problem! I have a new Samsung Galaxy Sprint S3 SPH-L710 4.1.1 and I flashed CMW ROM and did not do a back up of the stock OS. The phone still works with the ROM that I flashed cm-10.1m1. I already know befor you say it dumb right! Lol I'm kicking myself because I know better. I need help finding a mirror of the stock OS with all the drivers and kernels! Can anyone help out, thanks. :crying:
Click to expand...
Click to collapse
So whats your issue? Why do you need the stock rom...? The drivers are the same and the stock kernel is for stock only, not aosp
Sent from my PG06100
Okay I did some research, and I found online that the Samsung phones need .tar.md5 not .img files for recovery.
http://forum.xda-developers.com/showthread.php?t=1484304
I did not use these directions since I don't run linux, and I wasn't going to download VMWare. Anyways, the way I fixed it, I purchased and downloaded Mobile Odin from the Play store. I put the recovery.img on my external SDcard, then opened the app. Under "recovery" I selected recovery.img and then scrolled down to "Flash" It flashed the recovery.img with no problems, then booted me into recovery. I then flashed mrRobinson_Ashaman.v2.20_signed.zip so I could uninstall some bloatware.
That last part was mostly for me, until I find a ROM I like.
CNexus said:
So whats your issue? Why do you need the stock rom...? The drivers are the same and the stock kernel is for stock only, not aosp
Sent from my PG06100
Click to expand...
Click to collapse
I'm selling my phone and getting the Galaxy S4 and the person wants the stock back on the phone.
shadowcop9514 said:
I'm selling my phone and getting the Galaxy S4 and the person wants the stock back on the phone.
Click to expand...
Click to collapse
Oh ok then, just run the latest Supersonic RUU (4.67 i think)
Sent from my PG06100
CNexus said:
Oh ok then, just run the latest Supersonic RUU (4.67 i think)
Sent from my PG06100
Click to expand...
Click to collapse
Ok, where do I find that ?
shadowcop9514 said:
Ok, where do I find that ?
Click to expand...
Click to collapse
WHOOPS. Sorry, I was thinking about another phone
Look up "flash back to stock galaxy s3" on google and you should get some good hits. Ignore the RUU thing, I thought I was on the OG evo forums
Sent from my PG06100
CNexus said:
WHOOPS. Sorry, I was thinking about another phone
Look up "flash back to stock galaxy s3" on google and you should get some good hits. Ignore the RUU thing, I thought I was on the OG evo forums
Sent from my PG06100
Click to expand...
Click to collapse
Ok thanks!
Hi all I'm am new to this but i need much help here. After updating my Note 2 t889 to new firmware 4.3 OTA, my screen starts up and i can see the Galaxy Not 2 logo but then it glitches and goes to black. I can no longer see anything after but can still hear my phone boot up, light up eveything else. I have downloaded the official 4.3 from samobile and use odin to reinstall, everything went fine but still the screen does the samething. The only screen that im able to see fine is the download screen, recovery screen is black. Please Help!
i dont know if this information matter but i did replace the digitizer with a N7100. The screen worked for 2 months with 4.1.2 until this update. Is it possible that the update made the N7100 digitizer not compatible any more? any help would be really appreciatied.
My Note 2 t889 flickers when I attempt to update android as well. Its rooted and I think it has something to do with the cwm recovery used to root. But not 100%.
I have tried to update it numerous times, to no avail.
I think I need to un root, and start from scratch, then root again when updated to get rid of the flicker.
It flickers and rolls when trying to reboot after updating.
Have to enter recovery, wipe cache abd restart to get it to just boot.
Any ideas?
Be well.
Sent from my SGH-T889 using xda app-developers app
Are either you using a non stock kernel?
Hastily spouted for your befuddlement
well i might've screwed up now, try downgrading from 4.3 to 4.1.2 using this method i found;
So I did this a couple times now first by accident, then on purpose. If you want to go back to 4.1.2 from 4.3 all you have to do is use Odin. Flash stock 4.1.2 onto 4.3 you get an error "unsupported firmware" then put your phone back into download mode (volume down+home button+power) next flash CF-auto root. After that you can boot into recovery (volume up+home+power) in recovery format everything factory reset, format cache. Last reboot your phone it should reboot into 4.1.2 I think that is how I did it if I remember all the steps right. Feel free to ask questions I don't always explain myself very well.
i was thinking that this might work because my phone was fine on 4.1.2 so why not try. now on the download screen it says void:1, to make matters worst, it still doing the same thing. bad motherboard?
NbisYaj001 said:
well i might've screwed up now, try downgrading from 4.3 to 4.1.2 using this method i found;
So I did this a couple times now first by accident, then on purpose. If you want to go back to 4.1.2 from 4.3 all you have to do is use Odin. Flash stock 4.1.2 onto 4.3 you get an error "unsupported firmware" then put your phone back into download mode (volume down+home button+power) next flash CF-auto root. After that you can boot into recovery (volume up+home+power) in recovery format everything factory reset, format cache. Last reboot your phone it should reboot into 4.1.2 I think that is how I did it if I remember all the steps right. Feel free to ask questions I don't always explain myself very well.
i was thinking that this might work because my phone was fine on 4.1.2 so why not try. now on the download screen it says void:1, to make matters worst, it still doing the same thing. bad motherboard?
Click to expand...
Click to collapse
Hi, I got the same problem. My screen flickers at the galaxy note 2 logo after I flash the cf-autoroot after waiting the phone reboot itself and its okay, no flickering. So I tried to reflash the stock rom to see if it's fix, but it's not, I just wait again to boot my phone. Any idea how to fix it?
ok, I'm not sure if i'm posting in the right place, but if not, I'll just have to get some crap about that. I have a note 2 and the 4.3 update was draining my battery faster than was acceptable, so i rooted and flashed cm11 to it. I didn't like cm11 after a few days, so i went to try to return to 4.2.
every time i'd try, there would be either an error extracting the files to my computer or it would fail in odin. i finally got tired of trying and decided to go back to the stock firmware and was going to update back to the current official firmware. i thought it had unrooted, and i got the stock firmware working, but when i went to update back to 4.3, it failed and is now stuck on the "samsung galaxy note II" screen when i turn it on. I can get it into download mode, and i try to reflash various roms hoping something will work at this point, but nothing does. odin says it's successful, but it stays on that same screen when i turn it on.
the only thing i can think of is that i forgot to do a data wipe or clear the cache at some point in trying to get back and forth between roms? the problem is that i can't get back into recovery mode, AT ALL. I've tried every combination of the volume up, down, home and power buttons. I've tried holding all the buttons and plugging in the usb cable, EVERYTHING.
i've searched everywhere on xda and tried all of it, multiple times. I saw a thread about a flashable rom that included a data wipe, but it was for a completely different phone, so i left the thread to search for a compatible option like that. i've rooted a few other phones in the past with success, and failure, but none that couldn't be overcome.
Can anyone help? Please!!
This method worked for me.
One click Odin AT&T 4.3 update Note2 -> http://forum.xda-developers.com/showthread.php?t=2496292
Direct download link from above --> http://forum.xda-developers.com/showthread.php?t=2496292&page=23
Youtube video with instructions -->https://www.youtube.com/watch?v=zwUdd_SkzSQ
CF Auto Root -> http://forum.xda-developers.com/showthread.php?t=1980644
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
ShrekOpher said:
This method worked for me.
One click Odin AT&T 4.3 update Note2 -> http://forum.xda-developers.com/showthread.php?t=2496292
Direct download link from above --> http://forum.xda-developers.com/showthread.php?t=2496292&page=23
Youtube video with instructions -->https://www.youtube.com/watch?v=zwUdd_SkzSQ
CF Auto Root -> http://forum.xda-developers.com/showthread.php?t=1980644
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
thanks, I'm downloading it now. How does Heimdall differ from Odin, I've never used it.
craig.hagler said:
ok, I'm not sure if i'm posting in the right place, but if not, I'll just have to get some crap about that. I have a note 2 and the 4.3 update was draining my battery faster than was acceptable, so i rooted and flashed cm11 to it. I didn't like cm11 after a few days, so i went to try to return to 4.2.
every time i'd try, there would be either an error extracting the files to my computer or it would fail in odin. i finally got tired of trying and decided to go back to the stock firmware and was going to update back to the current official firmware. i thought it had unrooted, and i got the stock firmware working, but when i went to update back to 4.3, it failed and is now stuck on the "samsung galaxy note II" screen when i turn it on. I can get it into download mode, and i try to reflash various roms hoping something will work at this point, but nothing does. odin says it's successful, but it stays on that same screen when i turn it on.
the only thing i can think of is that i forgot to do a data wipe or clear the cache at some point in trying to get back and forth between roms? the problem is that i can't get back into recovery mode, AT ALL. I've tried every combination of the volume up, down, home and power buttons. I've tried holding all the buttons and plugging in the usb cable, EVERYTHING.
i've searched everywhere on xda and tried all of it, multiple times. I saw a thread about a flashable rom that included a data wipe, but it was for a completely different phone, so i left the thread to search for a compatible option like that. i've rooted a few other phones in the past with success, and failure, but none that couldn't be overcome.
Can anyone help? Please!!
Click to expand...
Click to collapse
Ok, I don't think it will work as your bootloader are updated to 4.3 version and since you are trying to go back on 4.2 may be that ROM is trying to flash 4.2 bootloaders.
A_youu said:
Ok, I don't think it will work as your bootloader are updated to 4.3 version and since you are trying to go back on 4.2 may be that ROM is trying to flash 4.2 bootloaders.
Click to expand...
Click to collapse
i'm really just trying to get to anything that works at this point, if it's 4.3, that's fine.
craig.hagler said:
i'm really just trying to get to anything that works at this point, if it's 4.3, that's fine.
Click to expand...
Click to collapse
Yes, I think Stock 4.3 will work...Go in download mode and flash 4.3 stock rom from here.
http://forum.xda-developers.com/showthread.php?t=2589891
Also, you can find 4.3 bootloaders in above thread. (just make sure that you dont flash "AT&T i317 ODIN 4.3 UCUBMJ4 (Leak) Bootloader & TZ (AT&T Note 2 ONLY)" as these bootloaders are only for 4.3 Leaked version. But since you were on STOCK 4.3, therefore don't flash this bootloader.
I will suggest not to try ROM which ShrekOpher provided as that ROM is leaked 4.3 ROM and has different Bootloader.
---------- Post added at 04:40 PM ---------- Previous post was at 04:34 PM ----------
A_youu said:
Yes, I think Stock 4.3 will work...Go in download mode and flash 4.3 stock rom from here.
http://forum.xda-developers.com/showthread.php?t=2589891
Also, you can find 4.3 bootloaders in above thread. (just make sure that you dont flash "AT&T i317 ODIN 4.3 UCUBMJ4 (Leak) Bootloader & TZ (AT&T Note 2 ONLY)" as these bootloaders are only for 4.3 Leaked version. But since you were on STOCK 4.3, therefore don't flash this bootloader.
I will suggest not to try ROM which ShrekOpher provided as that ROM is leaked 4.3 ROM and has different Bootloader.
Click to expand...
Click to collapse
You can also try this before flashing any ROM and see if this fix problem for you -
Pull the battery and let the phone sit for a few seconds, pop the battery in and boot into stock recovery (HOLD VOL UP+HOME+POWER) and do a FACTORY RESET then reboot.
A_youu said:
Yes, I think Stock 4.3 will work...Go in download mode and flash 4.3 stock rom from here.
http://forum.xda-developers.com/showthread.php?t=2589891
Also, you can find 4.3 bootloaders in above thread. (just make sure that you dont flash "AT&T i317 ODIN 4.3 UCUBMJ4 (Leak) Bootloader & TZ (AT&T Note 2 ONLY)" as these bootloaders are only for 4.3 Leaked version. But since you were on STOCK 4.3, therefore don't flash this bootloader.
I will suggest not to try ROM which ShrekOpher provided as that ROM is leaked 4.3 ROM and has different Bootloader.
---------- Post added at 04:40 PM ---------- Previous post was at 04:34 PM ----------
You can also try this before flashing any ROM and see if this fix problem for you -
Pull the battery and let the phone sit for a few seconds, pop the battery in and boot into stock recovery (HOLD VOL UP+HOME+POWER) and do a FACTORY RESET then reboot.
Click to expand...
Click to collapse
that's part of the problem, i can't get into recovery mode, so i can't flash any roms at all right now
and i've actually tried that thread you linked. i can't unzip the cwm files and i cant get to recovery mode to flash anything
craig.hagler said:
that's part of the problem, i can't get into recovery mode, so i can't flash any roms at all right now
and i've actually tried that thread you linked. i can't unzip the cwm files and i cant get to recovery mode to flash anything
Click to expand...
Click to collapse
In that thread you can also find ROM for Odin. Try installing that ROM via Odin
A_youu said:
In that thread you can also find ROM for Odin. Try installing that ROM via Odin
Click to expand...
Click to collapse
ive flashed with odin many times with many roms, but nothing is working. it still freezes at the "samsung galaxy note 2" screen. i've tried stock roms, custom roms, and i've even tried doing an emergency firmware install through samsung kies. i can get to download mode, but not recovery mode.
Also, for some reason, my computer is saying many of the zip files are damaged or can't be opened for some reason. I've tried winace, bitzipper, and 7zip, and it does the same on all of them for some of the files. that's what it said for all of the files on that link any idea of a way around it?
craig.hagler said:
Also, for some reason, my computer is saying many of the zip files are damaged or can't be opened for some reason. I've tried winace, bitzipper, and 7zip, and it does the same on all of them for some of the files. that's what it said for all of the files on that link any idea of a way around it?
Click to expand...
Click to collapse
You can try to root it by flashing CWM via Odin and then if you can get into recovery mode try to do Factory Reset and reboot. Hopefully this will solve your problem. If Factory reset don't solve your problem then you can flash new room from recovery mode.
A_youu said:
You can try to root it by flashing CWM via Odin and then if you can get into recovery mode try to do Factory Reset and reboot. Hopefully this will solve your problem. If Factory reset don't solve your problem then you can flash new room from recovery mode.
Click to expand...
Click to collapse
i can't get into recovery mode to flash any roms or do a factory reset that's my issue. is there a way to get into recovery mode if the phone won't boot up and the three button way isn't working?
craig.hagler said:
i can't get into recovery mode to flash any roms or do a factory reset that's my issue. is there a way to get into recovery mode if the phone won't boot up and the three button way isn't working?
Click to expand...
Click to collapse
You can go into download mode, right? So, I am saying that instead of flashing ROM from Odin. Try to Flash CWM via Odin and then try to put your phone into recovery mode...
A_youu said:
You can go into download mode, right? So, I am saying that instead of flashing ROM from Odin. Try to Flash CWM via Odin and then try to put your phone into recovery mode...
Click to expand...
Click to collapse
how do i flash cwm? what do i put in what spot in odin? still in the pda spot?
craig.hagler said:
how do i flash cwm? what do i put in what spot in odin? still in the pda spot?
Click to expand...
Click to collapse
and why would it keep saying the files are damaged? is it something with my computer, or the file, or the extracting program?
craig.hagler said:
how do i flash cwm? what do i put in what spot in odin? still in the pda spot?
Click to expand...
Click to collapse
Here, you can try to follow these steps and see if helps you.
http://forum.xda-developers.com/showthread.php?t=1980644
Follow top 3 posts at above link. You can find "SGH-I317: CF-Auto-Root-t0lteatt-t0lteatt-samsungsghi317.zip" in 3rd post and instructions in 2nd post to flash it through Odin.
A_youu said:
Here, you can try to follow these steps and see if helps you.
http://forum.xda-developers.com/showthread.php?t=1980644
Follow top 3 posts at above link. You can find "SGH-I317: CF-Auto-Root-t0lteatt-t0lteatt-samsungsghi317.zip" in 3rd post and instructions in 2nd post to flash it through Odin.
Click to expand...
Click to collapse
that's actually the exact one i used to root my phone originally. it worked then, but it isn't working now. it will work in odin, and says it passes, but when i try to boot or get into recovery mode, it won't do it
craig.hagler said:
that's actually the exact one i used to root my phone originally. it worked then, but it isn't working now. it will work in odin, and says it passes, but when i try to boot or get into recovery mode, it won't do it
Click to expand...
Click to collapse
1) Pull the battery and let the phone sit for a few seconds,
2) (HOLD VOL UP+HOME+POWER) and
3) pop the battery in while holding those 3 buttons and see if you can get into recovery this way.
If you can get to recovery this way then do Factory Reset and reboot.
A_youu said:
1) Pull the battery and let the phone sit for a few seconds,
2) (HOLD VOL UP+HOME+POWER) and
3) pop the battery in while holding those 3 buttons and see if you can get into recovery this way.
If you can get to recovery this way then do Factory Reset and reboot.
Click to expand...
Click to collapse
no luck. i'm going to leave the battery out overnight and try again in the morning
craig.hagler said:
no luck. i'm going to leave the battery out overnight and try again in the morning
Click to expand...
Click to collapse
I've read thru this thread, and see your having problems everything recovery mode.
Q:
You sure you have a custom recovery installed?
Are you sure it's rooted?
If so then you should be able to install a custom recovery, using goo manger!
You can also look here for info..
http://forum.xda-developers.com/showthread.php?p=46900555
Sent from my SAMSUNG-SGH-I317 using Tapatalk
I have left my phone off for 2 days and when i go ahead to start it up it is stuck on the "Samsung galaxy s4"
Logo. I cannot enter recovery, only download mode. I flashed .tar stock file and still that doesn't work. Can anyone help me,?
Subzero000 said:
I have left my phone off for 2 days and when i go ahead to start it up it is stuck on the "Samsung galaxy s4"
Logo. I cannot enter recovery, only download mode. I flashed .tar stock file and still that doesn't work. Can anyone help me,?
Click to expand...
Click to collapse
Flash it twice. Boot into download - Flash once. Remove Battery. Boot into download - Flash again. Don't try to boot between flashes.
Also, get your .tar from here:
http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Rob
rlichtefeld said:
Flash it twice. Boot into download - Flash once. Remove Battery. Boot into download - Flash again. Don't try to boot between flashes.
Also, get your .tar from here:
http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Rob
Click to expand...
Click to collapse
Ive tried this process a million times and ive tried it again. It isnt working, and can only go into download mode. When i try to boot into recovery it just shows the blue saying "recovery booting..." but never goes into recovery, nor does it boot. Maybe a PIT file would work? Even though i think i dont need one, idk
Subzero000 said:
Ive tried this process a million times and ive tried it again. It isnt working, and can only go into download mode. When i try to boot into recovery it just shows the blue saying "recovery booting..." but never goes into recovery, nor does it boot. Maybe a PIT file would work? Even though i think i dont need one, idk
Click to expand...
Click to collapse
Try a different computer to flash it, or it is done for. Does ODIN indicate that there was an error flashing?
There is nothing else we can do for you on this forum, if it won't flash the stock firmware. That is the last resort. The firmware has everything you should need to be able to get it back working, if it is software related. It could be hardware.
Rob
rlichtefeld said:
Try a different computer to flash it, or it is done for. Does ODIN indicate that there was an error flashing?
There is nothing else we can do for you on this forum, if it won't flash the stock firmware. That is the last resort. The firmware has everything you should need to be able to get it back working, if it is software related. It could be hardware.
Rob
Click to expand...
Click to collapse
The stock firmware is what i have been flashing and it Odin does say 'Successful'. Since it has everything i need then i guess the phone is done for i opened the phone to checke the hardware, it seems the battery is a bit swelled, do u think that may play a role in this? And when i plug it in to charge the phone doesnt show battery status picture instead, it just keeps vibrating as if i were to plug in and remove the charger. The charger is brand new btw. I really appreciate ur help Rob.
rlichtefeld said:
Try a different computer to flash it, or it is done for. Does ODIN indicate that there was an error flashing?
There is nothing else we can do for you on this forum, if it won't flash the stock firmware. That is the last resort. The firmware has everything you should need to be able to get it back working, if it is software related. It could be hardware.
Rob
Click to expand...
Click to collapse
I'm getting somewhere, it seems as if only CWM recovery and PhilZ recovery work. Twrp does not work. I installed 3 custom roms and still didnt work, i tried restoring a back up and the phone restarts in the middle of it making as if it crashes. I went into the root of the phone and i realized the only folder that DOES NOT open is the 'boot' which now i am thinking when i flash anything the boot isnt sticking. Do u know if there is a boot tar file or zip that i can flash?
Subzero000 said:
I'm getting somewhere, it seems as if only CWM recovery and PhilZ recovery work. Twrp does not work. I installed 3 custom roms and still didnt work, i tried restoring a back up and the phone restarts in the middle of it making as if it crashes. I went into the root of the phone and i realized the only folder that DOES NOT open is the 'boot' which now i am thinking when i flash anything the boot isnt sticking. Do u know if there is a boot tar file or zip that i can flash?
Click to expand...
Click to collapse
If it is the boot partition, you'll need to update the firmware, not just the ROM. You'll have to do that with ODIN and a PC, not CWM nor PhilZ. TWRP works fine as long as you use v2.8.4.0 or earlier. The v2.8.7.0 has bugs.
If you are flashing different recoveries, you should be able to flash the firmware. Again, you HAVE to flash twice in a row for it to stick. Flash with ODIN. Remove battery. Flash again. Then, boot the phone.
Rob
rlichtefeld said:
If it is the boot partition, you'll need to update the firmware, not just the ROM. You'll have to do that with ODIN and a PC, not CWM nor PhilZ. TWRP works fine as long as you use v2.8.4.0 or earlier. The v2.8.7.0 has bugs.
If you are flashing different recoveries, you should be able to flash the firmware. Again, you HAVE to flash twice in a row for it to stick. Flash with ODIN. Remove battery. Flash again. Then, boot the phone.
Rob
Click to expand...
Click to collapse
I tried the oldest twrp and doesnt work, maybe ill try 2.8.4.0. I did that with odin. As soon as it installs and vibrates and shuts the screen i remove the battery and put it back in and go back into download mode and flashed again. It still did not stick. Or should i flash, then as soon it reboots i hold down volume to enter download mode, rather than remove battery?
Subzero000 said:
I tried the oldest twrp and doesnt work, maybe ill try 2.8.4.0. I did that with odin. As soon as it installs and vibrates and shuts the screen i remove the battery and put it back in and go back into download mode and flashed again. It still did not stick. Or should i flash, then as soon it reboots i hold down volume to enter download mode, rather than remove battery?
Click to expand...
Click to collapse
Uncheck the Reboot box on ODIN. Don't let it reboot. That is the problem. '
In ODIN. Load the .tar. Uncheck Reboot.
Boot into Download mode and Flash. DO NOT REBOOT.
Pull the battery.
Wait a few minutes.
Put the battery back in.
Boot into Download Mode. Flash.
Then reboot.
There are several threads about how to do this on this section of the forum and on the General section.
Rob
rlichtefeld said:
Uncheck the Reboot box on ODIN. Don't let it reboot. That is the problem. '
In ODIN. Load the .tar. Uncheck Reboot.
Boot into Download mode and Flash. DO NOT REBOOT.
Pull the battery.
Wait a few minutes.
Put the battery back in.
Boot into Download Mode. Flash.
Then reboot.
There are several threads about how to do this on this section of the forum and on the General section.
Rob
Click to expand...
Click to collapse
I did exactly that, i waited 10 minutes with the battery removed and redid process again. Not working ? why is it only cwm working and not twrp? I wonder whats making it work...
Subzero000 said:
I did exactly that, i waited 10 minutes with the battery removed and redid process again. Not working ? why is it only cwm working and not twrp? I wonder whats making it work...
Click to expand...
Click to collapse
At this point, I have no idea. But, IIRC when you flash the firmware, it should be replacing your custom Recovery (CWM) with the Stock Recovery.
So, are you flashing CWM after you are flashing the firmware? Or, are you trying to use CWM to flash the firmware? If so, that is the issue. You have to use ODIN with a computer to flash the firmware.
CWM, Philz and TWRP are for flashing ROMs, kernels, etc, not firmware.
Rob
rlichtefeld said:
At this point, I have no idea. But, IIRC when you flash the firmware, it should be replacing your custom Recovery (CWM) with the Stock Recovery.
So, are you flashing CWM after you are flashing the firmware? Or, are you trying to use CWM to flash the firmware? If so, that is the issue. You have to use ODIN with a computer to flash the firmware.
CWM, Philz and TWRP are for flashing ROMs, kernels, etc, not firmware.
Rob
Click to expand...
Click to collapse
No, i am not flashing anything after i flash the firmware. I am using odin to flash the stock firmware. Even stock revovery doesn't work. When u flash and it attempts to boot ,it shows the blue letters 'recovery booting' with the galaxy s4 logo and stays stuck there. At this point i am very lost. Do you think it's a power button issue?
Subzero000 said:
No, i am not flashing anything after i flash the firmware. I am using odin to flash the stock firmware. Even stock revovery doesn't work. When u flash and it attempts to boot ,it shows the blue letters 'recovery booting' with the galaxy s4 logo and stays stuck there. At this point i am very lost. Do you think it's a power button issue?
Click to expand...
Click to collapse
I would not think it is the power button, since you say it does turn on. And, it does seem the Volume rocker works, since it tries to get into Recovery and does get into Download mode.
Which version of the firmware are you trying to flash?
Depending on the version of the bootloader/modems, etc. you can't downgrade versions of the firmware. You can only flash the same version or higher.
Are you flashing the 4.4.4 from here?
http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Are you sure you have a SGH-M919 version of the S4? If you look under the battery, it should have a sticker with that model number.
rlichtefeld said:
I would not think it is the power button, since you say it does turn on. And, it does seem the Volume rocker works, since it tries to get into Recovery and does get into Download mode.
Which version of the firmware are you trying to flash?
Depending on the version of the bootloader/modems, etc. you can't downgrade versions of the firmware. You can only flash the same version or higher.
Are you flashing the 4.4.4 from here?
http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Are you sure you have a SGH-M919 version of the S4? If you look under the battery, it should have a sticker with that model number.
Click to expand...
Click to collapse
I tried the firmware from that posting and dkd not work so, i went and got it from sammobile.com and still didnt work. I had this phone for 2 years and yes it is Sgh-m919 4.4.4 i had on it. And i flashed a i9505 custom rom on it through twrp and worked flawlessley. The phone was off for 2 days and i turned it on and this happened :/
rlichtefeld said:
I would not think it is the power button, since you say it does turn on. And, it does seem the Volume rocker works, since it tries to get into Recovery and does get into Download mode.
Which version of the firmware are you trying to flash?
Depending on the version of the bootloader/modems, etc. you can't downgrade versions of the firmware. You can only flash the same version or higher.
Are you flashing the 4.4.4 from here?
http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Are you sure you have a SGH-M919 version of the S4? If you look under the battery, it should have a sticker with that model number.
Click to expand...
Click to collapse
Sir, i after following the procedure and didnt work i left the phone battery out and phone off for 3-4 days. I put the battery in today, literally just now and it somehow worked amd booted normally... it instantly sent goosebumps throughout my body because it just seemed so odd and unexpected with no reasoning for it to work now. Do u have any idea of what it may have been?
Subzero000 said:
Sir, i after following the procedure and didnt work i left the phone battery out and phone off for 3-4 days. I put the battery in today, literally just now and it somehow worked amd booted normally... it instantly sent goosebumps throughout my body because it just seemed so odd and unexpected with no reasoning for it to work now. Do u have any idea of what it may have been?
Click to expand...
Click to collapse
I have no idea. Just thank the gods of electronics and carry on.
But, it could be some sort of hardware connection that is sometimes connected and sometimes not. You may want to start looking for a backup or spare.
Rob
rlichtefeld said:
I have no idea. Just thank the gods of electronics and carry on.
But, it could be some sort of hardware connection that is sometimes connected and sometimes not. You may want to start looking for a backup or spare.
Rob
Click to expand...
Click to collapse
Id like to thank you a lot as u are an outstanding helper on xda. I warmly appreciate your kindness to guide me through the issue. Best wishes to you