[Q] RTL8187 Drivers - Galaxy Tab 3 Q&A, Help & Troubleshooting

Hi every one just had a galaxy tab 3 SM-T310 and installed [Kernel]JB MH2-4.2.2- GalaTab3 Kernel-Tab3_8.0 v13.12.21r5 -Overhauled and UPDATED!,
Every thing is working fine but I would like to try my Alfa AWUS036H but of course there are no drivers installed, question is would it be possible to install drivers?

Related

[Q] PPP Widget Says No Drivers Installed

HI Xda Members. I Have Nexus 7 2013 version and bought 3g modem Huawei e180 for this. I Rooted my device, then connected with OTG Cable. it says No Driver Found. Can you help? one guy said, that i need to install custom rom which supports PPP, but there wasn't anything like this on net. Please Help me.
elchin98 said:
HI Xda Members. I Have Nexus 7 2013 version and bought 3g modem Huawei e180 for this. I Rooted my device, then connected with OTG Cable. it says No Driver Found. Can you help? one guy said, that i need to install custom rom which supports PPP, but there wasn't anything like this on net. Please Help me.
Click to expand...
Click to collapse
Nobody Knows Answer?
oh goosh
Hi, i am going through the same thing too. iv scoured the net for a solution but its looking bleak right now. i found this site which says
"Attention: Android 4.3 has changed the kernel so that loading driver modules is disabled. Nexus 7 Old still has modem drivers enabled in the kernel, but Nexus 7 New (Wifi) and Nexus 10 don't. Since there is no more way to add drivers, USB modems cannot be used with these devices anymore. Blame Google for this."
can someone confirm this or say otherwise. am really bumd that they would leave this feature to use an external modem out. when old nameless tablets can do it. ahhhh

Tab 3 3g sm-311 and Asix AX88772A usb pan with OTG

Hi to all friends.
I just bought an Samsung Galaxy Tab 3 3g sm-311 and I have a request for help.
I just rooted it and it works fine.
In my job they do not use wifi and I am in the need to use internet through my tab 3.
I already own a usb Lan card with asix chipset (AX88772A) that works fine with any pc and mac I ever used. Many people have connect it with OTG cable. It detects it but no drivers re installed in the tablet.
They provide drivers For Android 1.x/2.x/3.x/4.x, Linux kernel 2.6.14 and later that needs to be compiled to kernel.
I do not have the knowledge to do that. Can someone help me out on that and explain how I will put back the kernel ?
I would like to thank everyone in advance .
Best Regards
Anyone ?
Umm.... I think everyone with the 7 inch model of the Tab 3 is having that issue..... Some of us think that it will come through an uupdate or somthing.... Otherwise iv tried to push the persmissions using a xml file which says its detected and thats all....Still dosnt work...:crying:
You can download PPP Widget from the Play Store. Samsung devices lack the Option driver in the stock kernel, so you might need to get that separately. They don't need to be compiled into the kernel. You can have them as loadable modules. The forums on draisberghof.de may provide a link.
The ability to load kernel modules has been removed from the stock Android kernel from Android 4.3 onwards, which sucks, but we can always use a recompiled kernel.
No lack..... do you think that I should contact samsung ?
cmvrgr said:
No lack..... do you think that I should contact samsung ?
Click to expand...
Click to collapse
What have you tried? Did you get the drivers? Samsung will be unable to help except point you at their kernel source, if they do respond.
Please check this thread on the usb_modeswitch forum and request Josh for drivers for the specific kernel for the Tab.
freedune said:
What have you tried? Did you get the drivers? Samsung will be unable to help except point you at their kernel source, if they do respond.
Please check this thread on the usb_modeswitch forum and request Josh for drivers for the specific kernel for the Tab.
Click to expand...
Click to collapse
Its too bad that I can nor find a solution. I will be forced to sale the unit and buy a win8.1 tablet like toshiba encore.

cm 10.1 help needed

Hi All,
I have some old drivers that work on cm-10.1-20130329-NIGHTLY-n7100.zip,
Will it work on cm 4.1.3 ?
Can someone please upload me this ver (cm-10.1-20130329-NIGHTLY-n7100.zip)?
Best Regards
Gadi
what driver exactly you talking about?
if it's Samsung ADB driver, i think it works on (almost) every version of rom.
OTG wifi card
sixtisiik said:
what driver exactly you talking about?
if it's Samsung ADB driver, i think it works on (almost) every version of rom.
Click to expand...
Click to collapse
Hi,
The driver is for OTG ext WIFI card, Will it work?
Best Regards
Gadi
AFAIK, it's a universal driver so it 'should' works across versions of rom.
Or you can try installing Kies and get the driver from it.
It won't hurt to try
Hope that helps
Cheers

[Q] DVB-T dose it work?

Hi,
just wonder if or how to make dvb-t working on tab.
I installed Elementarx kernel , but dont get how to load modules.
I have CE6230 DVB-T USB2.0 stick.
not much info abaut nexus 7 2013 how to get it running
Thanx

[Q] uvc driver on T705 using dashcam and UsbWebカメラ

Hi Guys,
I'm trying to get my new usb microscope working on may Tab S 8.4 4.4.2. stock with root.
Cam is DigiMicro 2.0 Scale (dnt.de)
I only get UsbWebカメラ working but just up to 800x600 Resolution. 720p is max available but doens't work. The Scope supports up to 1600x1280 (2MP).
Also, there are two devices shown in list, just the second one works.
This App worked also before rooting the device.
Dashcam never worked .. asked for access to device but shows nothing.
Same on my Note II with Phoenix Rom v18.8 Android 4.4.2
I read about the uvc driver that is necessary to get usb webcam working over USB-TG.
So when UsbWebカメラ works (limited but works), uvc driver should be on my devices and access possible because of root. Am i right?
But why limited and why doesn't Dashcam work?
Hoping you guys can help me with any tips to get the scope proper working, that would be really awesome!
Cheers!
My guess is that kernel needs a recompile with UVC driver enabled.
I have asked in the Skyhigh Kernel thread to incorporate it:
http://forum.xda-developers.com/showpost.php?p=58250924&postcount=477

Categories

Resources