Related
HI All,
Hope you can take a look over my setup and help me maximize the space on this phone.
I have rooted, S-off'ed and Followed several guides trying 3 Roms. I like Leedroid best and want to use it going forward. However I keep running out of space after a couple of months and find myself wiping the phone down to start again. despite using the 3.0.8.2 a2sd version of the rom.
I've read posts about this issue suggesting A2SD reintall or terminal emulator fix's but they refer to CM7 and other Roms so I am fearful of trying them out without consulting the experts.
Can anyone see what I'm doing wrong or suggest a new approach I would be willing to wipe everything and start again I.e re-install apps from the market because TB keeps my contact sms etc safe.
I dont know what a2sd leedroid comes packaged with. the "a2sd reinstall" command from terminal is something specific to Dark Tremor a2sd. This can be installed on any rom, so it could be that. This wont break anything if you have any other a2sd solution as these commands wont be programmed into the script.
If it has got Dark tremor, moving dalvik-cache onto sd ext would save space too. the command for that would be "a2sd cachesd"
Hi RootSU, Thanks for your reply. I've downloaded the terminal emulator and tried those commands, doesn't seem to work.
I suppose what I'm trying to Ask is: To run Leedroid what is the optimum configuration to fit the most apps without getting running low message coming up.
Here is the quick sys info which i got too.
LeeDroid ROM does not have the DarkTremor's script - so the a2sd commands won't work. AFAIK, it uses MCRScripts.
There should be an application like that in the ROM with preinstalled scripts.
The last time is used there was and after running the script which moved the dalvik to the SD the problem got solved.
This is the link for the patch:
http://forum.xda-developers.com/showpost.php?p=15732939&postcount=384ton
Yep, just found that add o in the thread:
http://leedroid.ftp.rshost.eu/Bravo_Addons/Move-Dalvik-to-sdext.zip
if you havent done this, it will save a lot of space.
Ok thanks,
I saved that file to SDcard rebooted to recovery and Applied Zip file, It seemed to go well took a while but no errors. Here is a new pic of system info not really much change is there ?
Can you suggest any other checks ?
Not really. may be you already did this? How many apps have you got?
Are you s-off? Maybe try data++ version?
i used to use this rom, now on HD port
can't remember, but i think the A2SD rom already moves the dalvik cache to ext, so flashing that zip won't save anything. you must have a lot of data on internal
to maximise internal storage use the data++ ROM
there is a very good FAQ on how to install it, and more importantly, explains the difference.
since you are already S-OFF, it involves changing hboot to maximise internal memory. then you can move dalvik to ext to have even more...
thanks guys makes sense, Eddie giving this FAQ a go.
Hello Folks,
I have just moved from MW CM 5.0 to MW 4.3 (Oxygen) due to some call-delay issue of the first one.
MW 4.3 is quick and with no major bugs. the only bad surprise is the memory availability. Making a Titanium restore of all the previouse app+dada I crashed in the annoying "not enough memory" message.
I imagine that the fact that the M2SD is managed internally change the performance of it (true?). By the way I was playing with the different option trying to gain some space and I came across a new functionality (new for me) such as "bind /data/data to sd-ext/app-data" not really sure what it does but it increased my free internal memory from 12mb to 89mb. GREAT !! the only problem is that the overall speed of the system went drastically down. I guess it s normal as application will read their data from the SD instead of the quicker internal memory. Unfortunately with this option on the whole gsm was not usable anymore.
My question is: Is there any way to free more memory using this ROM? (with a decent GSM's response time)
Thanks for your help
Stefano
stegal said:
Hello Folks,
I have just moved from MW CM 5.0 to MW 4.3 (Oxygen) due to some call-delay issue of the first one.
MW 4.3 is quick and with no major bugs. the only bad surprise is the memory availability. Making a Titanium restore of all the previouse app+dada I crashed in the annoying "not enough memory" message.
I imagine that the fact that the M2SD is managed internally change the performance of it (true?). By the way I was playing with the different option trying to gain some space and I came across a new functionality (new for me) such as "bind /data/data to sd-ext/app-data" not really sure what it does but it increased my free internal memory from 12mb to 89mb. GREAT !! the only problem is that the overall speed of the system went drastically down. I guess it s normal as application will read their data from the SD instead of the quicker internal memory. Unfortunately with this option on the whole gsm was not usable anymore.
My question is: Is there any way to free more memory using this ROM? (with a decent GSM's response time)
Thanks for your help
Stefano
Click to expand...
Click to collapse
Well... that's the only option available on that rom, is to enable and mount sdext, that way it will move apps to the sdcard. I don't think it moves dalvik. Either way, what's your sdcard and class? Usually moving only apps doesn't really slow nothing important unless it's a class 2 card or some card with slower speeds. Even moving dalvik the rom should stay fast IMO. There's a slowdown but not that much.
MidnightDevil said:
Well... that's the only option available on that rom, is to enable and mount sdext, that way it will move apps to the sdcard. I don't think it moves dalvik. Either way, what's your sdcard and class? Usually moving only apps doesn't really slow nothing important unless it's a class 2 card or some card with slower speeds. Even moving dalvik the rom should stay fast IMO. There's a slowdown but not that much.
Click to expand...
Click to collapse
I think that option I used "bind" move app and data to sd-ext. my sd is a class 4.
stegal said:
I think that option I used "bind" move app and data to sd-ext. my sd is a class 4.
Click to expand...
Click to collapse
if u check the attachments for the rom in the development thread, there should be a dalvik2sd.zip there, i think i posted it there ages ago. just flash it in recovery.
Sent from my HTC Desire
dalvik2sd
jmcclue said:
if u check the attachments for the rom in the development thread, there should be a dalvik2sd.zip there, i think i posted it there ages ago. just flash it in recovery.
Sent from my HTC Desire
Click to expand...
Click to collapse
Jm,
I have a comment for you. First while I was looking for you post (could not find it though) I came across something that goes against your post, please read the following
<<
Do a clean installing!
Tips:
To enable Apps2Sdext and/or Data2SdExt visit Settings|Applications|Development.
To set the default installation partition go to Settings|Applications.
To move applications from sd-ext|sdcard|internal Settings|Applications|Manage Applications.
There is no Dalvik2SdExt because .dex will follow the location of the apk, so if you install an application on sd-ext the dex will be on sd-ext, the same applys for internal or sdcard.
Do not use A2sd scripts. >>
So where is the truth. Do I need this script or not. If you can explain me why could you also provide a link to this script?
Thanks in advance
Stefano
il post it later if u want it, im on my phone. u will get more memory
Sent from my HTC Desire
jmcclue said:
il post it later if u want it, im on my phone. u will get more memory
Sent from my HTC Desire
Click to expand...
Click to collapse
The part that confuse me is that "There is no Dalvik2SdExt because .dex will follow the location of the apk, so if you install an application on sd-ext the dex will be on sd-ext, the same applys for internal or sdcard."
I do not understand .. what he is saying, there is not dalvik2Sd and there is not need to have one (something like the A2SD) or there is not dalvik2sd so go ahead to install one.
if you know that the dalvik2sd script can free some space without side effects...pls post it
thanks
stegal said:
The part that confuse me is that "There is no Dalvik2SdExt because .dex will follow the location of the apk, so if you install an application on sd-ext the dex will be on sd-ext, the same applys for internal or sdcard."
I do not understand .. what he is saying, there is not dalvik2Sd and there is not need to have one (something like the A2SD) or there is not dalvik2sd so go ahead to install one.
if you know that the dalvik2sd script can free some space without side effects...pls post it
thanks
Click to expand...
Click to collapse
basically if u check the box to install apps in sd-ext, from "now" on apps will install on sd-ext, but there is aready dalvik cache on ur phone before u check the boxes and thats what the dalvik2sd.zip moves(i think). iv used the zip and has no effect on performance or anything, it just free's up a wee bit of space.
il post the zip in bout 2 hours coz im busy. if u look at the OxyZM thread, click the attachments, the file is there.
Sent from my HTC Desire
jmcclue said:
il post it later if u want it, im on my phone. u will get more memory
Sent from my HTC Desire
Click to expand...
Click to collapse
hi Jmcclue,
I tried to find your post...without result. I found one where you say that it was possible to download "click the wee paper clip", ok now I sound really silly but...where should I click? (no..I am not a blondie even if I sound like it )
F1, F1!!
Stefano
stegal said:
hi Jmcclue,
I tried to find your post...without result. I found one where you say that it was possible to download "click the wee paper clip", ok now I sound really silly but...where should I click? (no..I am not a blondie even if I sound like it )
F1, F1!!
Stefano
Click to expand...
Click to collapse
lol il just upload it
Sent from my HTC Desire
Dalvik to sd for MildWild Oxygen and where the "wee paper clip" is lol (attachments).
md5 - d7ba5d384a78d14e57d293cd877eef7b
jmcclue said:
lol il just upload it
Sent from my HTC Desire
Click to expand...
Click to collapse
...hello jm just coming back to thank you for your support. Finally I have a stable situation. Nevertheless after installing the script you have uploaded nothing changed. I had to factory reset, reinstal CM 4.3, install your script and everthing went smooth. Now it s 2 weeking I am keeping installing new apps and my free memory stay basically stable uner 80mb free space.
I have just one curiosity..if I go to Settings--> storage I see SD-ext "unavailable". After all I do not care much but if it is unavailable...where my apps have been stored so far? ps I reserved 1Gb of SD-ext .
Cheers
ps I just installed another apps of 3mb...no changes in the free space, so cool I feel like "no-limits"
stegal said:
...hello jm just coming back to thank you for your support. Finally I have a stable situation. Nevertheless after installing the script you have uploaded nothing changed. I had to factory reset, reinstal CM 4.3, install your script and everthing went smooth. Now it s 2 weeking I am keeping installing new apps and my free memory stay basically stable uner 80mb free space.
I have just one curiosity..if I go to Settings--> storage I see SD-ext "unavailable". After all I do not care much but if it is unavailable...where my apps have been stored so far? ps I reserved 1Gb of SD-ext .
Cheers
ps I just installed another apps of 3mb...no changes in the free space, so cool I feel like "no-limits"
Click to expand...
Click to collapse
not sure if it's been mentioned, but you should also be on cm7r2 hboot to maximise space (need to be s-off).
then follow the instructions on the first page of the thread to enable sd-ext. this will move user apps + user app dalvik cache to sd-ext. in other words, most of the dalvik cache should already be on sd-ext.
the dalvik2sd script should only move system dalvik cache to sd-ext, which will save you a little space.
to check everything is working, use an app like 'diskusage' to browse your partitions.
Hello, I have a GT-S5660 and last week I loaded this ROM -
Jellybean 4.2.2 (CyanogenMod 10.1) 20130908 from maclaw.
But I am running out of space on the internal storage, I have tried the App2SD app but there are some apps that cannot be moved and after loading up 3-4 apps I am running out of space already.
Can someone point me to a ROM that allows me to install ALL my apps to the SD card? I dont mind going backwards in Android versions - I just want to run apps off the sd card. I mainly use the phone as a phone but am a heavy user of whatsapp - footmob - dropbox - music and ebooks.
I have a 2gig SDCard installed in the phone and I made a partion on it using CWM. I hope everything is setup to be able to a new ROM and allow apps install to the SD.
I dont need - FM radio - email (I use gmail) - exchange - only English language - voice search - voice dialler or talk.
Can anyone help me make a good choice for a new ROM ?
Thanks a lot in advance!
You should install JellyBread.
It's the best rom for Gio, it's fast and stable.
And it already has a script in it to move apps to sd-ext.
So create a ext-2, ext-3 or ext-4 partition on your sd-card.
Then go to terminal emulator (pre-installed) and type
su
Then it will ask for root, accept, then
int2ext
reboot
Then check in Settings>Apps>Mangage applications and if you see your storage is huuuuge then it worked.
DevWithCookies said:
You should install JellyBread.
It's the best rom for Gio, it's fast and stable.
And it already has a script in it to move apps to sd-ext.
So create a ext-2, ext-3 or ext-4 partition on your sd-card.
Then go to terminal emulator (pre-installed) and type
su
Then it will ask for root, accept, then
int2ext
reboot
Then check in Settings>Apps>Mangage applications and if you see your storage is huuuuge then it worked.
Click to expand...
Click to collapse
Great I will check it out and see how it works.
Thanks very much for your help
I use CM10.1 by Mardon for 3-4 months and is very stable and good looking too.I had the storage free space problem too but I used Link2SD to uninstall and move apps to SD and now I have 100mb free.I also replace original LatinIME (11mb) with another that has only 3mb
Sent from my GT-I9001 using Tapatalk 2
Had to load the ROm twice for some reason, it got stuck on the loading screen for about 20 mins so I did a factory reset and wipe again then it worked fine.
Just perfect!! exactly what I was looking for!
Having great fun loading up LOTS of apps now
Thanks a lot for helping
Mokum42 said:
Had to load the ROm twice for some reason, it got stuck on the loading screen for about 20 mins so I did a factory reset and wipe again then it worked fine.
Just perfect!! exactly what I was looking for!
Having great fun loading up LOTS of apps now
Thanks a lot for helping
Click to expand...
Click to collapse
What ROM ?
Sent from my GT-I9001 using Tapatalk 2
Hello, everyone.
I'm a big fan of MildWild's roms, specially of the Oxygen-based 5.0. A superb work of art!
However, always looking for ways to get the most from my fast-aging Desire, I've tried the V6 Supercharger scripts. I've got a rather mixed-up feeling from those, though. I think what they promise is *very* exciting, but in order to get they fully working a lot of work and experimentation is needed. Which is fine… up to a certain point.
So, to the point: does anybody here have a working, optimized, configuration for V6, which works nicely for MildWild 5.0? I'm asking, because there have been times in which, after carefully choosing the "right/best" options during configuration, I got even disappearing applications!
Any light that can be shed on this matter will be appreciated. Thanks in advance.
I tried V6 supercharger on an older version of mildwild oxygen with mixed results
Not sure how much of an effect it actually had. My main issue with it was that it seemed to forget which was my home launcher and choose a different /system app which defeated the point of the script. Ended up removing it and default kernel with Go launcher was ok, though might have performed better with a lighter launcher.
Make sure it says 100% supercharged at least, play around with a few of the options, read the documentation to get an idea of what to pick. Best place to ask would be in the V6 thread itself if it doesn't work.
As for disappearing apps, not sure how much that is due to the script. Are you using the zipalign option? You may be conflicting with the ROM's own zipalign script if it has one. If so, don't zipalign with V6
Also how is your ROM currently set up?
- Which hboot (think cm7r2 is recommended)?
- How did you partition your sd card (gparted or 4EXT recovery recomended, not minitool or clockworkmod recovery)
- Using default A2SD script? Keep you apps on 'internal' to trick to sd-ext, no need to 'move to SD'
eddiehk6 said:
Make sure it says 100% supercharged at least, play around with a few of the options, read the documentation to get an idea of what to pick. Best place to ask would be in the V6 thread itself if it doesn't work.
As for disappearing apps, not sure how much that is due to the script. Are you using the zipalign option? You may be conflicting with the ROM's own zipalign script if it has one. If so, don't zipalign with V6
Also how is your ROM currently set up?
- Which hboot (think cm7r2 is recommended)?
- How did you partition your sd card (gparted or 4EXT recovery recomended, not minitool or clockworkmod recovery)
- Using default A2SD script? Keep you apps on 'internal' to trick to sd-ext, no need to 'move to SD'
Click to expand...
Click to collapse
Thanks for answering!
To begin with, getting to the desired 100% supercharged took a lot of time, reading and experimentation. Sometimes, the very same set of settings led me to different results!
As to your questions:
My current rom is MildWild 5.0, with an Oxygen-R2 HBOOT (as you incidentally have suggested in http://forum.xda-developers.com/showpost.php?p=46278979&postcount=306).
My sd card has a 1 GB ext partition, created with gparted.
I'm using the default A2SD script that MildWild included. Never before have I run into any sort of problem with it.
To be honest, right now, the zip aligning hint you're giving seems the most promising exploration route to me. I will be trying it next weekend.
Thank for the advice!
Hey everybody,
Have a strange problem. My phone keeps saying I'm low on space, despite the fact that I have a 1,5 gb sd-ext, and still ~880 mb free.
The sd is formatted with 4ext, and the partition is ext4. The SD card is class 10.
See the attached file for a visual of what I'm talking about.
Hope that someone can help
Cheers,
- H
EDIT:
Aaaaannd, now it's stuck on boot...
I had simmilar problems with various APP 2 SD scripts, including INT2EXT (+)
I had problems downloading form Play Store, because it told me that I don't have enough space, nor I could install from SD Card.
My suggestion is:
1.Wipe everything except SD Card and flash the rom again, you can't boot in it anyway, can you?
2. Find a rom to install, and flash it.
3. Search for better app2sd scripts, ( If using gingerbread you could use Link2SD - Used it alot in gingerbread, it doesn't work well in ICS & up )
My questions:
What rom are you using?
What APP2SD script are you using?
Click to expand...
Click to collapse
Silly me, noticed your signature.
If you are stuck in a bootloop, and don't know what to do, do following:
1. Turn off your phone.
2. Boot in recovery
3. Connect your phone to pc with USB
4. If you're using 4ext then it will be toggle usb storage, if clockworkmod ( classic ) then it will be under mounts
5. Copy a downloaded rom to your sd card.
6. Flash it!
Hey bro,
Thanks for the response..
No, it boots just fine.. it's just weird.. but I think I get it now.. It has something to do what the script actually moves to sd-ext, what HBOOT u use, i.e. how much space is allocated for system, data, etc.. ..
You see, before I got a Desire, I had a Samsung Galaxy Gio, running a custom CM 7 ROM, with Darktremor a2sd script. That worked PERFECTLY for me, coz I had set it up to move more or less everything to sd-ext. And although I had almost 1GB of apps, I didn't notice any lag or performance loss.
But now, I'm new to Desire, and I don't know a lot of these "new" a2sd scripts and how to configure them properly.. So it's gonna take a little time experimenting what works, and so on.
The first custom ROM for Desire I installed was a MildWild GB ROM - great ROM. Fast, stabile, just awesome..
But then I started experimenting with various ICS and JB ROMS, and then the problems began to show.. but basicly I think, and I sure dont wont to offend anybody, that the devs should make their ROMS without a a2sd script of their choosing, or at least give us an option to install it or not. Then we're (more) free to install whatever a2sd script we wish, without having to go through /init.d and removing existing script, and what not..
But yeah, it's all good.. Just got play around with it some more
Thanks anyway tho,
- H
EvilShadeZ said:
I had simmilar problems with various APP 2 SD scripts, including INT2EXT (+)
I had problems downloading form Play Store, because it told me that I don't have enough space, nor I could install from SD Card.
My suggestion is:
1.Wipe everything except SD Card and flash the rom again, you can't boot in it anyway, can you?
2. Find a rom to install, and flash it.
3. Search for better app2sd scripts, ( If using gingerbread you could use Link2SD - Used it alot in gingerbread, it doesn't work well in ICS & up )
Silly me, noticed your signature.
If you are stuck in a bootloop, and don't know what to do, do following:
1. Turn off your phone.
2. Boot in recovery
3. Connect your phone to pc with USB
4. If you're using 4ext then it will be toggle usb storage, if clockworkmod ( classic ) then it will be under mounts
5. Copy a downloaded rom to your sd card.
6. Flash it!
Click to expand...
Click to collapse
hhaznadar85 said:
Hey bro,
Thanks for the response..
No, it boots just fine.. it's just weird.. but I think I get it now.. It has something to do what the script actually moves to sd-ext, what HBOOT u use, i.e. how much space is allocated for system, data, etc.. ..
You see, before I got a Desire, I had a Samsung Galaxy Gio, running a custom CM 7 ROM, with Darktremor a2sd script. That worked PERFECTLY for me, coz I had set it up to move more or less everything to sd-ext. And although I had almost 1GB of apps, I didn't notice any lag or performance loss.
But now, I'm new to Desire, and I don't know a lot of these "new" a2sd scripts and how to configure them properly.. So it's gonna take a little time experimenting what works, and so on.
The first custom ROM for Desire I installed was a MildWild GB ROM - great ROM. Fast, stabile, just awesome..
But then I started experimenting with various ICS and JB ROMS, and then the problems began to show.. but basicly I think, and I sure dont wont to offend anybody, that the devs should make their ROMS without a a2sd script of their choosing, or at least give us an option to install it or not. Then we're (more) free to install whatever a2sd script we wish, without having to go through /init.d and removing existing script, and what not..
But yeah, it's all good.. Just got play around with it some more
Thanks anyway tho,
- H
Click to expand...
Click to collapse
How did you partition your sd-card? Using what?
Using 4ext - following ur guide actually... (tnx btw - awesome guide)
Sent from my HTC Desire using xda app-developers app
hhaznadar85 said:
Using 4ext - following ur guide actually... (tnx btw - awesome guide)
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
Try re-flashing the CM7 and try using INT2EXT+, sometimes APP2SD scripts doesn't work as they should, If you don't want to use scripts, you could use Link2SD - good choice aswell.
My setup:
Previously:
Stock Alpha Rev HBOOT
1.5 GB SD-EXT
4ext
cm7.2
Int2ext+
Now:
Everything the same except app2sd script and rom.
Evervolv Kitkat w/ built in App2SD
EvilShadeZ said:
Try re-flashing the CM7 and try using INT2EXT+, sometimes APP2SD scripts doesn't work as they should, If you don't want to use scripts, you could use Link2SD - good choice aswell.
My setup:
Previously:
Stock Alpha Rev HBOOT
1.5 GB SD-EXT
4ext
cm7.2
Int2ext+
Now:
Everything the same except app2sd script and rom.
Evervolv Kitkat w/ built in App2SD
Click to expand...
Click to collapse
Yeah, tell me about it.. altough, I've never had problems with the "old", original DarkTremmor a2sd script.. it's this "new" modified a2sd xdata thing that bugs me.. And I can't, for the life of me, figure out how to remove it completly, and replace it with the original DT a2sd script.. (it's built-in VJ's JB ROM, which I'm currently playing with.. )
But thanks anyway man,
- H
hhaznadar85 said:
Yeah, tell me about it.. altough, I've never had problems with the "old", original DarkTremmor a2sd script.. it's this "new" modified a2sd xdata thing that bugs me.. And I can't, for the life of me, figure out how to remove it completly, and replace it with the original DT a2sd script.. (it's built-in VJ's JB ROM, which I'm currently playing with.. )
But thanks anyway man,
- H
Click to expand...
Click to collapse
If there's app2sd in rom, but you need to activate it with terminal, then you might consider not to. Just give other APP2SD / Mount 2 SD scripts a try.
Link for INT2EXT:
CronMod Scripts ( INT2EXT )
I suggest you taking Int2Ext+
INT2EXT+
-Mounts /sd-ext to /data
-Leaves /data/data on internal for speed
-Works with EXT 2/3/4 filesystems
-ZipAligns /data/app on every boot
-No symlinks
Click to expand...
Click to collapse
Never really had problems with space running out on internal w/ it.
As ICS / JB roms go, I find them slow, and unresponsive, but kitkat is opposite
EvilShadeZ said:
If there's app2sd in rom, but you need to activate it with terminal, then you might consider not to. Just give other APP2SD / Mount 2 SD scripts a try.
Link for INT2EXT:
CronMod Scripts ( INT2EXT )
I suggest you taking Int2Ext+
Never really had problems with space running out on internal w/ it.
As ICS / JB roms go, I find them slow, and unresponsive, but kitkat is opposite
Click to expand...
Click to collapse
Wow, thanks a lot! These CronMod scripts look great. Gonna try it out tomorrow.
But this is just weird.. I tried pretty much everything; not activating it in terminal, then try to remove it; stuck on boot, tried replacing the script manually using root explorer --> stuck. Tried replacing the script in the ROM package (zip file) before flashing it --> stuck.. I'd just LOVE to see the decompiled framework, to see how the f**k it's embeded in this ROM, to make it so impossible to get rid of...?!?
Cheers,
- H
hhaznadar85 said:
Wow, thanks a lot! These CronMod scripts look great. Gonna try it out tomorrow.
But this is just weird.. I tried pretty much everything; not activating it in terminal, then try to remove it; stuck on boot, tried replacing the script manually using root explorer --> stuck. Tried replacing the script in the ROM package (zip file) before flashing it --> stuck.. I'd just LOVE to see the decompiled framework, to see how the f**k it's embeded in this ROM, to make it so impossible to get rid of...?!?
Cheers,
- H
Click to expand...
Click to collapse
If you want the same rom:
Open .zip package of the on pc.
Then Go in system/etc/init.d
delete something like: mountext and app2sd ( should look simmilar )
Then archive it (System, BOOT.img, META-INF ) Swith archiver program - Winrar perhaps? ( Using .ZIP ) extension.
Then put it in your sd card.
Then Wipe everything ( except sdcard )
Flash the rom.
Flash the Int2Ext script,
Wipe sd-ext again.
Boot.
If this doesn't work for you, you're doomed!
j/k. Just try another rom.
Highly suggest trying latest nightly for Evervolv Kitkat. (Evervolv / Bravo page.)
Since it's nightly you'll gonna find bugs, but from my experience it's better than all the ICS / JB roms. Might argue about GB roms.
If you decide to get KitKat, you can enable App2SD in it's terminal (not in the rom - fetch it at google play)l:
su
a2sd install
y
n
y
Click to expand...
Click to collapse
NO EVERVOLV NIGHTLY TALKS HERE!