Related
So I rooted my Note II but I left the stock ROM on the phone, and AT&T just pushed a big OTA update. What steps do I need to be able to install an OTA update now? After a bit of research, it seems I need to unroot? I've just never had to do this before because I usually just use custom ROMs, but on the Note I wanted to leave the stock ROM in place.
rtatum said:
So I rooted my Note II but I left the stock ROM on the phone, and AT&T just pushed a big OTA update. What steps do I need to be able to install an OTA update now? After a bit of research, it seems I need to unroot? I've just never had to do this before because I usually just use custom ROMs, but on the Note I wanted to leave the stock ROM in place.
Click to expand...
Click to collapse
I used MrRobinsons' root injected ROM which was UCAMA4 (I think) and left the recovery alone, used the root access app that I bought to keep root. I did not remove any AT&T apps and was able to update to UCAMC3 without any problems. And the app that I bought kept my root access.
CodeNameRedNeck said:
I used MrRobinsons' root injected ROM which was UCAMA4 (I think) and left the recovery alone, used the root access app that I bought to keep root. I did not remove any AT&T apps and was able to update to UCAMC3 without any problems. And the app that I bought kept my root access.
Click to expand...
Click to collapse
Well -ALL- I did was root, install clockwork recovery, and Super SU. So I'm wondering what I need to do to be able to install an OTA update now, because I currently cannot.
It is my understanding that you must leave the recovery stock. I have also read that you must leave the AT&T apps in there but I am not sure about that. So if you want the update go back to stock then update then change your recovery.
CodeNameRedNeck said:
It is my understanding that you must leave the recovery stock. I have also read that you must leave the AT&T apps in there but I am not sure about that. So if you want the update go back to stock then update then change your recovery.
Click to expand...
Click to collapse
Well it's been a while since I've messed with this, so I just need to find instructions on how to return to stock.
Edit: Found a thread to remove root and factory reset, but my OTA update still won't install.
Edit2: Goes to the AT&T Updating progress screen and fails at about 25% and then reboots and starts up as normal.
rtatum said:
So I rooted my Note II but I left the stock ROM on the phone, and AT&T just pushed a big OTA update. What steps do I need to be able to install an OTA update now? After a bit of research, it seems I need to unroot? I've just never had to do this before because I usually just use custom ROMs, but on the Note I wanted to leave the stock ROM in place.
Click to expand...
Click to collapse
I don't have a solution to your problem, but I am very curious which AT&T update you are referring to.
Npsacobra said:
I don't have a solution to your problem, but I am very curious which AT&T update you are referring to.
Click to expand...
Click to collapse
Me too. Whatever it is it isn't a major upgrade. . .
Npsacobra said:
I don't have a solution to your problem, but I am very curious which AT&T update you are referring to.
Click to expand...
Click to collapse
No idea, it's a ~65mb update that just came up yesterday for me. I was looking to reset my phone back to factory anyways lately, so I just decided to do it now on account of there being an update. Since it's not working anyways, I might just re-root and flash a custom ROM, but then I lose S-Pen functionality, but I don't use the pen much these days anyways.
The update has two possibilities...
Either it's the latest UCAMC3 update for UCAMA4.....or...
If updating from the UCAMA4 to C3....and the update has an interrupt...or errors....it "can" complete the update process and show a finished status...but will prompt the user again later and download the update again....minus the updater files placed to cache....because they already exist...
I've had this happen twice in so many months as I returned to stock for various reasons...
The file size is roughly 65 meg.....while the complete update is 68.86 meg..
Just take the update...as it's the UCAMC3 minus the updater...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
Same problem here. I just made a thread asking on a fix. So I'll let u know if I get one. And I'll check back here to see if u do
Sent from my Motorola starTAC
Well I gotta say I love the update alot but my s3 is flashed to boost mobile and apparently when i updated to the new mk3 my data went away...I know for a fact if i can edit my apns i can get it to work...the only way ive been able to always edit my apns was with the apn backup & restore app....but you have to be rooted...so my question is there any way I can edit apns without being rooted... or even flash?? Thanks in advance!!!!
Yes you can re flash without being rooted. Some has rooted 4.3 on Virgin Mobile S3 over at the androidforums.
TheBritton said:
ROOTED THE UPDATE SUCCESSFULLY
Reverted to stock recovery, flashed custom recovery, flashed SuperSU.. rooted!
No problems
UPDATE: SuperSU is not working after boot. It says "Unauthorized access to a secured area has been blocked" does anyone know how to get around this??
SECOND UPDATE: After rebooting, it has reverted me to the stock recovery. This is crazy. Hopefully someone can help with this.. or post a version of 4.3 without this Knox pain in the..
THIRD UPDATE: EDIT: I fixed it!! I have root access! I was able to locate SuperSU in system/app and reinstall; load up SuperSU and enable survival mode. Now I'm freezing Knox with Titanium Backup
Click to expand...
Click to collapse
http://androidforums.com/newreply.php?do=newreply&p=6286627
Also was it worth the upgrade? I want to go to it but I bet when I do CNexus would already have a flashable zip I would have went back to stock with root for nothing.
Wow lol should read more...but thatnk you very much!!!! Yes man i really enjoy the update...i mean if what you like are stock touchwiz features youd be very pleased...and once again thank you
No problem. Also my phone is flashed to Virgin Mobile I updated to MK3 modem and my data still works but I didn't upgrade the OTA from sprint. I flashed the at&t rom of TW 4.3 update and I liked it since I love touchwiz but since data and sms wasn't working I went back to MIUI.
I have looked around and can't seem to get a straight answer about this. I have a stock rooted gn2, if i update over the air will it brick it? At the moment i have the att updater frozen with titanium backup. Any insight would be greatly appreciated, happy holiday!
where have you been searching? This has been covered dozens of times...
sorry
could you possibly provide a link sir?
generally speaking you can NOT take/install any OTA update when you are rooted...most OTA updates wont install if a custom recovery is detected.
99% of the time it wont work, .09% of the time it might install but you will have all sorts of issues, and .01% of the time it will work..
I think that pretty much covers it; you should probably just be patient and wait until the dev's incorporate it into a custom rom, and then you wont have to unroot to "enjoy" what ever the wonderful features are that ATT was so kind to include in their update..
And the install checks for stock system
You can install if you have stock rom. Root doesn't matter. My phone was rooted with stock room and twrp recovery. I just flashed stock recovery back. I had my superuser integrated in system partition. After Ota, i upgraded superuser apk. It then disabled Knox and download latest su binary.
So successful update with root preserved. Pm me of you need help
Sent from my SAMSUNG-SGH-I317 using Tapatalk
WARNING :
If you take the official OTA to 4.3 while root is present...you WILL trip the KNOX counter in your boot loader.
And if you root after an official 4.3 update you WILL trip KNOX anyway..
My .02....DO NOT UPDATE....
Stay rooted on the old bootloader and flash a custom 4.3 rom.....g
Wife is getting a new AT&T note 2 on the 24th (it already shipped). I would assume it doesn't have the OTA on it yet. Can you just reject the OTA when it arrives? Or will it try to install automatically on the new phone. Any way to prevent that until I can get my hands on it (have time tio mess with it).
Anyone try flashing a rom After ota update?
Did you thank your Developer today?
Same boat
I too have a stock rooted 4.1.2. OTA fails as root present, got that. All I need is a stock 4.3 root. I have read several posts and still unclear as to what to do. I have either missed it or just not found the answer.
Do I need to unroot via SuperSU? then OTA? Odin flash a stock ROM?
Please don't bash as I am only seeking an answer. And any help is greatly appreciated!
cordless89 said:
I too have a stock rooted 4.1.2. OTA fails as root present, got that. All I need is a stock 4.3 root. I have read several posts and still unclear as to what to do. I have either missed it or just not found the answer.
Do I need to unroot via SuperSU? then OTA? Odin flash a stock ROM?
Please don't bash as I am only seeking an answer. And any help is greatly appreciated!
Click to expand...
Click to collapse
I had stock rooted 4.1.2 with cwm as my recovery. I did the ota update. After the update, cwm wanted to fix root but couldn't. Essentially I lost root. Next, I re-rooted with CF-Auto-Root. I then installed SuperSU from play store which disabled Knox. Using GooManager I flashed TWRP. The last issue was wifi wasn't working. I used Odin to flash this file: http://d-h.st/OYC (unzip and use the tar in Odin). Wifi restored. Overall I like this update. It's faster and smoother.
Having said all this, I do not recommend anyone use this method. It's much cleaner to unroot then update. Or better yet, as suggested before, use one of the custom 4.3 roms.
flymacs said:
I had stock rooted 4.1.2 with cwm as my recovery. I did the ota update. After the update, cwm wanted to fix root but couldn't. Essentially I lost root. Next, I re-rooted with CF-Auto-Root. I then installed SuperSU from play store which disabled Knox. Using GooManager I flashed TWRP. The last issue was wifi wasn't working. I used Odin to flash this file: link removed (unzip and use the tar in Odin). Wifi restored. Overall I like this update. It's faster and smoother.
Having said all this, I do not recommend anyone use this method. It's much cleaner to unroot then update. Or better yet, as suggested before, use one of the custom 4.3 roms.
Click to expand...
Click to collapse
I noticed the OTA did not work on my nine as I got the "unable to update" after the OTA downloaded. I initially rooted via the CF-Auto flash.
Just curious as to next step.
flymacs said:
I had stock rooted 4.1.2 with cwm as my recovery. I did the ota update. After the update, cwm wanted to fix root but couldn't. Essentially I lost root. Next, I re-rooted with CF-Auto-Root. I then installed SuperSU from play store which disabled Knox. Using GooManager I flashed TWRP. The last issue was wifi wasn't working. I used Odin to flash this file: http://d-h.st/OYC (unzip and use the tar in Odin). Wifi restored. Overall I like this update. It's faster and smoother.
Having said all this, I do not recommend anyone use this method. It's much cleaner to unroot then update. Or better yet, as suggested before, use one of the custom 4.3 roms.
Click to expand...
Click to collapse
So you had no trouble flashing TWRP? I went back to 4.1.1 from Skynote, OTA'd 4.1.2 and was going to flash another ROM but my wife got my phone the next morning to play slots and she accepted the 4.3 official update before I woke up. I did root with CF Auto and disabled Knox, but was wondering if Goomanager would work.
The next question is can we flash some ROMS with the rooted OTA 4.3?
Geeve
Is there a pre-rooted stock 4.3 for the i317 AT&T available?
geeve420 said:
So you had no trouble flashing TWRP? I went back to 4.1.1 from Skynote, OTA'd 4.1.2 and was going to flash another ROM but my wife got my phone the next morning to play slots and she accepted the 4.3 official update before I woke up. I did root with CF Auto and disabled Knox, but was wondering if Goomanager would work.
The next question is can we flash some ROMS with the rooted OTA 4.3?
Geeve
Click to expand...
Click to collapse
Goomanager worked fine. No problems with twrp either.
As far as flashing on from ota 4.3, I'm not brave enough yet.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
---------- Post added at 01:24 PM ---------- Previous post was at 01:17 PM ----------
cordless89 said:
I noticed the OTA did not work on my nine as I got the "unable to update" after the OTA downloaded. I initially rooted via the CF-Auto flash.
Just curious as to next step.
Click to expand...
Click to collapse
Did you debloat or remove any apps from the stock 4.1.2?
flymacs said:
Goomanager worked fine. No problems with twrp either.
As far as flashing on from ota 4.3, I'm not brave enough yet.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
---------- Post added at 01:24 PM ---------- Previous post was at 01:17 PM ----------
Did you debloat or remove any apps from the stock 4.1.2?
Click to expand...
Click to collapse
Nope, pretty much as stock as you can get plus root. OTA failed but I assume reason being the root... but I'm a newbie on this stuff.
cordless89 said:
Nope, pretty much as stock as you can get plus root. OTA failed but I assume reason being the root... but I'm a newbie on this stuff.
Click to expand...
Click to collapse
Then the next question I have is if you are using the stock recovery? I was using cwm on stock rooted 4.1.2. When I did the ota, the phone rebooted into cwm. Cwm asked if I wanted to do the update. I selected yes. When it completed, the Samsung installer gave a failed to install message, but cwm showed that it completed and wanted to fix root. It couldn't fix since I was unrooted at this point. I rebooted into 4.3 non-rooted. Re-rooted...etc.
I want to say again that I don't recommend anyone follow this procedure. I'm just trying to describe how I solved my own mess and hopefully answer any questions.
So I'm by no means super knowledgable with this stuff but I've rooted a few phones, played around with CM on my old evo but for the most part I enjoy rooted stock.
I have Galaxy S3 Sprint 4.3 updated OTA from a rooted (4.1.2). When I took the OTA I lost root, no big deal I used Odin and flashed the CF auto root, it said it removed knox and I had root back. Cool!
In short 4.3 sucked, wanted to downgrade back so things like TrevE mod would work again and it wouldn't be so buggy. I tried to use odin to flash "KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5" but it gave me the "Use Kies Recovery and error occured" message.
So I then used odin and flashed TWRP and my phone booted.
I'm back on 4.3 rooted.
I've tried picking through the forums and interwebz for answers but I get mixed messages and info on international versions and what not.
I'm tired of trying to figure it out and really could use some help downgrading back to 4.1.2
Thanks,
Brandon
mentorkyrom said:
So I'm by no means super knowledgable with this stuff but I've rooted a few phones, played around with CM on my old evo but for the most part I enjoy rooted stock.
I have Galaxy S3 Sprint 4.3 updated OTA from a rooted (4.1.2). When I took the OTA I lost root, no big deal I used Odin and flashed the CF auto root, it said it removed knox and I had root back. Cool!
In short 4.3 sucked, wanted to downgrade back so things like TrevE mod would work again and it wouldn't be so buggy. I tried to use odin to flash "KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5" but it gave me the "Use Kies Recovery and error occured" message.
So I then used odin and flashed TWRP and my phone booted.
I'm back on 4.3 rooted.
I've tried picking through the forums and interwebz for answers but I get mixed messages and info on international versions and what not.
I'm tired of trying to figure it out and really could use some help downgrading back to 4.1.2
Thanks,
Brandon
Click to expand...
Click to collapse
The 4.3 OTA installed a locked bootloader, which will prevent you from ODIN'ing back to a previous version. you can flash any ROM you would like from recovery, you CANNOT downgrade the bootloader. As of right now, if you have knox, you are stuck with it.
You are extremely lucky that you didn't brick your phone by using odin to flash a non-4.3 tar. I wouldnt try again.
My advice is, remain rooted with a custom recovery, and find a ROM to your liking, and flash that.
I have also heard that we cannot flash custom kernels on the knox (MK3) bootloader as well, but I havent verified that.
eletendre84 said:
The 4.3 OTA installed a locked bootloader, which will prevent you from ODIN'ing back to a previous version. you can flash any ROM you would like from recovery, you CANNOT downgrade the bootloader. As of right now, if you have knox, you are stuck with it.
You are extremely lucky that you didn't brick your phone by using odin to flash a non-4.3 tar. I wouldnt try again.
My advice is, remain rooted with a custom recovery, and find a ROM to your liking, and flash that.
I have also heard that we cannot flash custom kernels on the knox (MK3) bootloader as well, but I havent verified that.
Click to expand...
Click to collapse
Thank you for the response. Is CyanogenMod an option then? If I go to CM could I flash back a stock 4.3 rom in the future?
As an added bonus question does CM allow wifi tethering?
Again thank you for the response.
mentorkyrom said:
Thank you for the response. Is CyanogenMod an option then? If I go to CM could I flash back a stock 4.3 rom in the future?
As an added bonus question does CM allow wifi tethering?
Again thank you for the response.
Click to expand...
Click to collapse
CM is certainly an option. In fact, its what i am running now. CM11 12-24. Runs great. You can always odin the stock mk3 tar and go back to stock unrooted, at any time.
in order to flash cm11 you MUST be on TWRP 2.6.3.1 or CWM 6.0.4.5 or newer or the assert check will fail.
not sure on the tethering, but im pretty sure it definitely works on cm10.2 and i think it does on 11 as well, but dont quote me on that.
eletendre84 said:
CM is certainly an option. In fact, its what i am running now. CM11 12-24. Runs great. You can always odin the stock mk3 tar and go back to stock unrooted, at any time.
in order to flash cm11 you MUST be on TWRP 2.6.3.1 or CWM 6.0.4.5 or newer or the assert check will fail.
not sure on the tethering, but im pretty sure it definitely works on cm10.2 and i think it does on 11 as well, but dont quote me on that.
Click to expand...
Click to collapse
Tethering is available on CM11 just like it was on 10.2; would strongly recommend latest Philz Touch Recovery over either TWRP or CWM though. Although it is based on CWM, it has proven to be pretty much the superior recovery option for flashing any Android build number, plus it is highly customizable.
Philz Touch Recovery
this is how to downgrade
mentorkyrom said:
So I'm by no means super knowledgable with this stuff but I've rooted a few phones, played around with CM on my old evo but for the most part I enjoy rooted stock.
I have Galaxy S3 Sprint 4.3 updated OTA from a rooted (4.1.2). When I took the OTA I lost root, no big deal I used Odin and flashed the CF auto root, it said it removed knox and I had root back. Cool!
In short 4.3 sucked, wanted to downgrade back so things like TrevE mod would work again and it wouldn't be so buggy. I tried to use odin to flash "KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5" but it gave me the "Use Kies Recovery and error occured" message.
So I then used odin and flashed TWRP and my phone booted.
I'm back on 4.3 rooted.
I've tried picking through the forums and interwebz for answers but I get mixed messages and info on international versions and what not.
I'm tired of trying to figure it out and really could use some help downgrading back to 4.1.2
Thanks,
Brandon
Click to expand...
Click to collapse
do a factory data reset then use odin auto root from computer ok...... after boot u will get a security message supersu will be unfortunately stopping this is ok..... then u will need to download the supersu.app to root of sd then manually install this will update it and now u can turn off knox and have root... then go to market and download odin mobile then flash your .tar file u want and you will be good to go 4.1.2 doesn't have knox and has a unlocked bootloader so have fun bro this method may work for other phones
smuther22 said:
do a factory data reset then use odin auto root from computer ok...... after boot u will get a security message supersu will be unfortunately stopping this is ok..... then u will need to download the supersu.app to root of sd then manually install this will update it and now u can turn off knox and have root... then go to market and download odin mobile then flash your .tar file u want and you will be good to go 4.1.2 doesn't have knox and has a unlocked bootloader so have fun bro this method may work for other phones
Click to expand...
Click to collapse
Do you realize that this thread hasn't been used in a couple of months? I would assume the author has no more need of advice based on the inactivity. Also, once Knox is installed, it is on the phone to stay. PERIOD. NO DOWNGRADING POSSIBLE VIA ODIN. Custom ROMs of any build are fine via custom recovery, but any attempt to change the bootloader will trigger Knox and brick the phone. Dangerous info to be posting here, especially since someone else who doesn't know better might try this.
The development for the AT&T I747 has been discontinued by the developer. Thank you for your support.
WARNING: YOU COULD BRICK YOUR PHONE
UCUFNJ1 4.4.2 incremental update contains firmware.... bootloaders and modem baseband.
MUST BE ON UCUFNE4 FIRMWARE TO CONTINUE!!! Guide can be found here. http://forum.xda-developers.com/gal...are-update-t2808654/post53984772#post53984772
This is the perfect time to use this update to return your S3 to stock for resale or whatever. Download and save these files for when you are ready to return your phone to stock.
*This is a rooted NE4 system.img, stock recovery.img and boot.img. The install script will format system and factory data reset. /media is safe.*
1. Flash restore zip in a custom recovery. CWM, TWRP, Philz. https://www.androidfilehost.com/?fid=95784891001611561
2. Boot your phone and go through setup.
3. Use triangle away and clear your counter. http://forum.xda-developers.com/galaxy-s2/orig-development/2014-01-15-triangleaway-v3-26-t1494114
4. *Optional* If you want a clean un-rooted phone for the update do this now! , Go into SuperSu >settings>full unroot.
5. Reboot your phone.
6. Search for the OTA in the about settings, download and let the phone update.
Or download this and place in the root of your phones internal storage. Reboot into recovery and select the update from update.zip https://www.androidfilehost.com/?fid=95784891001611091
Advanced users.
The original OTA cfg file. https://www.androidfilehost.com/?fid=95784891001611092
.cfg file goes in root/cache/fota
Rename the .cfg extension to .zip and you can rename it update.zip yourself or you can actually flash it in a custom recovery once renamed. if you choose not to use the stock recovery to update.
*You will loose root during the update* But the bootloader is not locked so you can still Odin your favorite recovery and flash SuperSU.
TWRP 2.8.1.0 Odin tar. http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.8.1.0-d2att.tar
SuperSU http://download.chainfire.eu/589/SuperSU/UPDATE-SuperSU-v2.16.zip?retrieve_file=1
Once you flash your favorite recovery via Odin, you need to be ready to hold the Volume Up, Power and Home button combo when Odin reboots your phone. If you don't catch it, once the OS boots it will replace recovery with the stock version. Once SuperSU is installed your recovery will stick.
Flashable Rooted NJ1 system.img and boot.img
MD5: 6df80e42df56ddf90512f4162e645cb3
Download: https://www.androidfilehost.com/?fid=95784891001613266
Flashable NJ1 Bootloaders and modem. *Must be on NE4 bootloaders prior to flashing.*
Download: https://www.androidfilehost.com/?fid=95832962473396872
Thanks enewman for writing this up.
Doing Vice Versa Method?
Just to be clear, what if my galaxy s3 is on UCUFNJ1 and I want to go back to UCUFNE4, I can still ODIN the custom recovery and flash SuperSU?
Galaxy S3 I747
Baseband: I747UCUFNJ1
For the advanced users, should we be able to install the update without any issues? I saw in another thread that someone had installed but now their phone will not boot past the Samsung logo to anything other than a black screen.
Also, do we know what this update contains yet? Other than new bootloaders, removal of root, etc.
mattsternc said:
For the advanced users, should we be able to install the update without any issues? I saw in another thread that someone had installed but now their phone will not boot past the Samsung logo to anything other than a black screen.
Also, do we know what this update contains yet? Other than new bootloaders, removal of root, etc.
Click to expand...
Click to collapse
You know if your not wanting to return your phone to stock I really wouldn't mess with this update. Far as the user who couldn't boot... Idk I wasn't there to watch them update. This whole mess with the S3 is exhausting. We haven't got a real Odin release so I'm woking with what I can extract from my phone after updating. The system.img in ne4 zip is 100% stock except for root. So I know the update worked because I did it. Also not sure what was updated either... The kernel yes... Firmware yes, all the system apps get patched so without decompiling ne4 and nj1 apps and comparing them afraid I have no idea what the update fixes or improves.
Thanks for all you do for us S3 owners, enewman17.
If we upgrade to the new NJ1 firmware, and then flash your latest SRX Rom, I assume we cannot then use your "restore.zip" to once again go back to NE4 stock since we would be on NJ1 bootloader? If so, is there a way to go back to NJ1 stock if we later want to sell our phone?
OKAstro said:
Thanks for all you do for us S3 owners, enewman17.
If we upgrade to the new NJ1 firmware, and then flash your latest SRX Rom, I assume we cannot then use your "restore.zip" to once again go back to NE4 stock since we would be on NJ1 bootloader? If so, is there a way to go back to NJ1 stock if we later want to sell our phone?
Click to expand...
Click to collapse
I have the nj1 system dump, I'll get it uploaded so anyone who updates can restore back to stock.
enewman17 said:
I have the nj1 system dump, I'll get it uploaded so anyone who updates can restore back to stock.
Click to expand...
Click to collapse
Thanks again my man.
Towelroot no longer works after the NJ1 update. Can the CF-AutoRoot still be used? The only version at http://autoroot.chainfire.eu/ says it's for 4.0.4.
Ark42 said:
Towelroot no longer works after the NJ1 update. Can the CF-AutoRoot still be used? The only version at http://autoroot.chainfire.eu/ says it's for 4.0.4.
Click to expand...
Click to collapse
Not sure if it still works but read the op you can Odin a custom recovery then flash super su.
enewman17 said:
Not sure if it still works but read the op you can Odin a custom recovery then flash super su.
Click to expand...
Click to collapse
Yeah, I saw that, but I never had a custom recovery before, that I know of at least, and I suspect a lot of other people finding this thread in the coming days are going to be in the same boat as me. They just want SuperSU so their favorite 1 or 2 apps that require SU can continue to work.
Has anybody tried CF-AutoRoot yet on the NJ1 4.4.2?
Ark42 said:
Yeah, I saw that, but I never had a custom recovery before, that I know of at least, and I suspect a lot of other people finding this thread in the coming days are going to be in the same boat as me. They just want SuperSU so their favorite 1 or 2 apps that require SU can continue to work.
Has anybody tried CF-AutoRoot yet on the NJ1 4.4.2?
Click to expand...
Click to collapse
Agreed! I'm the same boat as you.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Ark42 said:
Yeah, I saw that, but I never had a custom recovery before, that I know of at least, and I suspect a lot of other people finding this thread in the coming days are going to be in the same boat as me. They just want SuperSU so their favorite 1 or 2 apps that require SU can continue to work.
Has anybody tried CF-AutoRoot yet on the NJ1 4.4.2?
Click to expand...
Click to collapse
Tell you what, when I get home from work I will try cfauto root and see if it works.
enewman17 said:
Not sure if it still works but read the op you can Odin a custom recovery then flash super su.
Click to expand...
Click to collapse
I can confirm this as a root method for NJ1. You were exactly right regarding immediately booting into recovery after installing TWRP thru Odin. The files provided in your links (TWRP 2.8.1.0 Odin tar. http://techerrata.com/file/twrp2/d2a....1.0-d2att.tar and
SuperSU http://download.chainfire.eu/589/Sup...etrieve_file=1)
worked exactly as stated.
A BIG thanks to you. I can't live without AdAway, TiBackup and Xposed anymore! The few days without root left me a little grumpy.
And regarding the NJ1 update as a whole...I THINK the baseband upgrade IS an actual upgrade. Since NE4, I always thought Wifi operated was somewhat choppy/throttled. THIS looks to have been improved back to ICS "standards". Re: voice, I've had a handful of dropped calls, broken up calls, and choppy data in low signal areas over the past few months on with NE4. Initial observations (albeit a tad premature) lead me to believe that this has improved as well based on a weeks worth of data use and a few calls in a "controlled" environment (the area and physical structure of my work office complex is not cellular signal friendly to begin with) I have also noticed that boot-up time has improved a bit as well. Thanks again for your efforts with the ATT GS3!
I flashed CF-Auto ROOT via Odin without success, unable to gain root access. Followed your instructions via TWRP and flashed SuperSu 2.16, my SGS3-i747 is properly rooted and functioning perfectly on UCUFNJ1. As always, thank you very kindly for all your valuable time, effort, hard work and guidance. Be well, sir!
mwrobe1 said:
I can confirm this as a root method for NJ1. You were exactly right regarding immediately booting into recovery after installing TWRP thru Odin. The files provided in your links (TWRP 2.8.1.0 Odin tar. http://techerrata.com/file/twrp2/d2a....1.0-d2att.tar and
SuperSU http://download.chainfire.eu/589/Sup...etrieve_file=1)
worked exactly as stated.
Click to expand...
Click to collapse
What version of Odin do we need to flash that TWRP, or do you have a link handy?
I've seen quite a lot of different Odins out there and don't want to brick my phone by using the wrong one.
Any pitfalls to watch out for if using TWRP for the first time? I'm sure there is going to be a bunch of people having to do this now that both CF-AutoRoot and TowelRoot doesn't work anymore.
For me, personally, I just use root for AdFree and to edit the font fallback order to properly support Japanese instead of Chinese glyphs on shared Han-unified Unicode codepoints.
Ark42 said:
What version of Odin do we need to flash that TWRP, or do you have a link handy?
I've seen quite a lot of different Odins out there and don't want to brick my phone by using the wrong one.
Any pitfalls to watch out for if using TWRP for the first time? I'm sure there is going to be a bunch of people having to do this now that both CF-AutoRoot and TowelRoot doesn't work anymore.
For me, personally, I just use root for AdFree and to edit the font fallback order to properly support Japanese instead of Chinese glyphs on shared Han-unified Unicode codepoints.
Click to expand...
Click to collapse
Use Odin 3.0.7
Not really any pitfalls to TWRP. It has an easy clean user interface and it works.
Once you have flash Super Su, in my how to ne4 update there is a flashable stock recovery. You just flash it with TWRP and once you reboot, stock recovery will be back on you phone.
Hi enewman17,
Thanks for your posts and work. I'm hoping you can help me get the new NJ1 update installed and rooted.
Here's where I'm at: AT&T SGS3 on rooted stock NE4, installed using your guides from back in June this year.
The OTA NJ1 update downloaded but failed to install (as did the NE4 OTA back then, I assume because I was rooted).
My phone still has the TWRP recovery from the previous update, so I was hoping I could install using the original OTA cfg file download from the "advanced" section in your OP so as to avoid factory reset, etc.
I downloaded the file, renamed to update.zip, and copied to my SD card. However, when I boot into TWRP and try to install it, I get an error after the system check, something like "assert failed ro.secure==1". I guess I'm doing something wrong, maybe I'm mistaken about how the original OTA is supposed to work?
Again, I'm trying to end up with a stock, but rooted, NJ1 firmware but hopefully without having to reset/lose data and settings on the phone. I don't really care right now about resale or making it look like I haven't messed with it.
Thanks for any help you can provide! Let me know if I can provide any additional details.
I am actually looking to do the exact same thing. Currently rooted, with a lot of the AT&T apps frozen via Titanium Backup.
Hope there is some way to accomplish this without returning to stock!
Thanks in advance!
Bob2014 said:
Hi enewman17,
Thanks for your posts and work. I'm hoping you can help me get the new NJ1 update installed and rooted.
Here's where I'm at: AT&T SGS3 on rooted stock NE4, installed using your guides from back in June this year.
The OTA NJ1 update downloaded but failed to install (as did the NE4 OTA back then, I assume because I was rooted).
My phone still has the TWRP recovery from the previous update, so I was hoping I could install using the original OTA cfg file download from the "advanced" section in your OP so as to avoid factory reset, etc.
I downloaded the file, renamed to update.zip, and copied to my SD card. However, when I boot into TWRP and try to install it, I get an error after the system check, something like "assert failed ro.secure==1". I guess I'm doing something wrong, maybe I'm mistaken about how the original OTA is supposed to work?
Again, I'm trying to end up with a stock, but rooted, NJ1 firmware but hopefully without having to reset/lose data and settings on the phone. I don't really care right now about resale or making it look like I haven't messed with it.
Thanks for any help you can provide! Let me know if I can provide any additional details.
Click to expand...
Click to collapse
Bob2014 said:
Hi enewman17,
Thanks for your posts and work. I'm hoping you can help me get the new NJ1 update installed and rooted.
Here's where I'm at: AT&T SGS3 on rooted stock NE4, installed using your guides from back in June this year.
The OTA NJ1 update downloaded but failed to install (as did the NE4 OTA back then, I assume because I was rooted).
My phone still has the TWRP recovery from the previous update, so I was hoping I could install using the original OTA cfg file download from the "advanced" section in your OP so as to avoid factory reset, etc.
I downloaded the file, renamed to update.zip, and copied to my SD card. However, when I boot into TWRP and try to install it, I get an error after the system check, something like "assert failed ro.secure==1". I guess I'm doing something wrong, maybe I'm mistaken about how the original OTA is supposed to work?
Again, I'm trying to end up with a stock, but rooted, NJ1 firmware but hopefully without having to reset/lose data and settings on the phone. I don't really care right now about resale or making it look like I haven't messed with it.
Thanks for any help you can provide! Let me know if I can provide any additional details.
Click to expand...
Click to collapse
I'll get my stock rooted system dump up later so you can flash in TWRP or CWM.
Do you guys want it packaged with the stock recovery?
mattsternc said:
I am actually looking to do the exact same thing. Currently rooted, with a lot of the AT&T apps frozen via Titanium Backup.
Hope there is some way to accomplish this without returning to stock!
Thanks in advance!
Click to expand...
Click to collapse