Hi guys, I've been flashing for a while and well, I kinda broke the display on my old note 2. I did an claim, have my new one here right in front of me. I've never had a problem rooting before (I've broken more than one phone and I'm not proud). But for some reason, my odin v 3.07 keeps hanging up when attempting to flash the Note2-CWM-6.0.4.3-SGH-T889.tar file I downloaded from http://galaxynote2root.com/cwm-recovery. It's Max Lee's site, he's pretty great at keeping it updated, as you can see It's cwm 6.0.4.3.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
Right here is where it hangs up, now I've watched countless videos from official Root method here on the T-Mobile Note 2 XDA forum, http://forum.xda-developers.com/showthread.php?t=1955423
I've even used the .tar files from the ^^ thread as well to see if it yielded different results and it still hangs up at the same exact spot.
to Max Lee's tutorial, and everyone's Odin zips right through it. I'm sure it's only supposed to take a few seconds. Can anyone help me figure out what's going on? Point me in the right direction? I'd really really appreciate it! Thanks!
Did you run cf auto root yet? Or did you try exynos abuse app? Once rooted just use rom manager to install recovery. When I rooted mine I didnt even use my pc
mattlowry said:
Did you run cf auto root yet? Or did you try exynos abuse app? Once rooted just use rom manager to install recovery. When I rooted mine I didnt even use my pc
Click to expand...
Click to collapse
I've never used that method, I've seen that method in the OP of the How to root T889 thread http://forum.xda-developers.com/showthread.php?t=1955423. Are you aware if it's up to date? If so, I'll try this
Cf auto will work for sure. Exynos abuse is easer because its on your phone but doesnt always work.
mattlowry said:
Cf auto will work for sure. Exynos abuse is easer because its on your phone but doesnt always work.
Click to expand...
Click to collapse
Just tried the exynos abuser, didn't work. Going to try the other method, thanks
mattlowry said:
Cf auto will work for sure. Exynos abuse is easer because its on your phone but doesnt always work.
Click to expand...
Click to collapse
Cf Auto root is hanging up, but in a different spot.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
My phone's display isn't changing, it just stays at the downloading.... do not turn off target!!
Any clue what's going on?
XCrazedxPyroX said:
Cf Auto root is hanging up, but in a different spot.
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:4)..
File analysis..
SetupConnection..
My phone's display isn't changing, it just stays at the downloading.... do not turn off target!!
Any clue what's going on?
Click to expand...
Click to collapse
What are you trying to flash? I mean with the new phone?? Are you just trying to flash root??
Sent from my SGH-T889 using xda app-developers app
XCrazedxPyroX said:
Cf Auto root is hanging up, but in a different spot.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
My phone's display isn't changing, it just stays at the downloading.... do not turn off target!!
Any clue what's going on?
Click to expand...
Click to collapse
Maybe a silly question but you do have usb debugging enabled right? Are you in mtp or camera?
PhxDroid86 said:
What are you trying to flash? I mean with the new phone?? Are you just trying to flash root??
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
I'm simply trying to install root, that's all. (CF-Auto-Root-t03g-t03gxx-gtn7100.zip unzipped, then PDA the CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 file) Once I get root, I can flash CWM myself, I've never had problems rooting before. It's always been with Odin, using pda, selecting the .tar file, and it'll simply root, and flash CWM, but if I could just get root, I'd be happy.
XCrazedxPyroX said:
I'm simply trying to install root, that's all. (CF-Auto-Root-t03g-t03gxx-gtn7100.zip unzipped, then PDA the CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 file) Once I get root, I can flash CWM myself, I've never had problems rooting before. It's always been with Odin, using pda, selecting the .tar file, and it'll simply root, and flash CWM, but if I could just get root, I'd be happy.
Click to expand...
Click to collapse
Have you uninstalled/reinstalled drivers? Used a different usb port? When connecting to odin (phone in download mode) what port is picked up (when going into device manager what port is odin picking up)??
Sent from my SGH-T889 using xda app-developers app
mattlowry said:
Maybe a silly question but you do have usb debugging enabled right? Are you in mtp or camera?
Click to expand...
Click to collapse
Developer options have been turned on, USB debugging is enabled, it is connected as a media device (MTP). I power it down, use the Volume Down+Home+Power combo, hit volume up to enter download mode. Hook it up to PC, open up Odin 3.07. Odin recognizes the Note 2 is there as it displays the COM:04 on the left. The only options checked is auto-reboot and f. reset time (default settings). I click PDA and I select the CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 file, I've tried the Note2-CWM-6.0.4.3-SGH-T889.tar file, I've tried multiple different .tar's and .md5's. They all hang up in Odin and my phone doesn't leave the Downloader screen. Is there anything I'm supposed to do BEFORE all of this that I'm just clumsily not remembering?! Thanks in advance!
PhxDroid86 said:
Have you uninstalled/reinstalled drivers? Used a different usb port? When connecting to odin (phone in download mode) what port is picked up (when going into device manager what port is odin picking up)??
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Also, when you go into qualcomm settings (through dialer) are your settings set to just "MTP" or "MTP + ADB"
Sent from my SGH-T889 using xda app-developers app
PhxDroid86 said:
Also, when you go into qualcomm settings (through dialer) are your settings set to just "MTP" or "MTP + ADB"
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
I went to the dialer, and don't see any "qualcomm settings" after hitting menu. Where's that at?
XCrazedxPyroX said:
Developer options have been turned on, USB debugging is enabled, it is connected as a media device (MTP). I power it down, use the Volume Down+Home+Power combo, hit volume up to enter download mode. Hook it up to PC, open up Odin 3.07. Odin recognizes the Note 2 is there as it displays the COM:04 on the left. The only options checked is auto-reboot and f. reset time (default settings). I click PDA and I select the CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 file, I've tried the Note2-CWM-6.0.4.3-SGH-T889.tar file, I've tried multiple different .tar's and .md5's. They all hang up in Odin and my phone doesn't leave the Downloader screen. Is there anything I'm supposed to do BEFORE all of this that I'm just clumsily not remembering?! Thanks in advance!
Click to expand...
Click to collapse
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> cache.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!
I tried a different USB port and got a little further.. Unfortunately when it powers down it removes itself and odin stops the process. Tried to turn on the phone and galaxy note 2 was little off center.
Scratch that!! powered down, reflashed the cf auto root and now I have root access! Thanks everyone! sorry for the hicup haha
XCrazedxPyroX said:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> cache.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!
I tried a different USB port and got a little further.. Unfortunately when it powers down it removes itself and odin stops the process. Tried to turn on the phone and galaxy note 2 was little off center.
Scratch that!! powered down, reflashed the cf auto root and now I have root access! Thanks everyone! sorry for the hicup haha
Click to expand...
Click to collapse
Glad to help, I had quite a few adventures end with simply switching usb ports in my day
Sent from my SGH-T889 using xda app-developers app
PhxDroid86 said:
Glad to help, I had quite a few adventures end with simply switching usb ports in my day
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
I truly never would have thought the USB port could be the issue haha, should I take down this post or something since it's been solved? I've already got CyanogenMod and CWM hooked up
Sent from my SGH-T889 using XDA Premium 4 mobile app
I have a problem in my phone please help me .. galaxcy not 2 i want to root it but the odin give me this massage
Enter cs for md5
Check
Related
I have been using my epic for a little more than a year now and I have used odin and update.zip to update my phone in the past. Also I have rooted my phone multiple times but this time I think I really screwed up. I have the stock EI22 gingerbread installed on my phone and I was trying to root it using ODIN with the ACS recovery. However now I cannot boot into my phone and when I try, I get this symbol of a phone and a computer not connected. I tried using ODIN to go back to EC05 but I get this wierd message from ODIN when I try.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> EC05_DXC.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.rfs
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried using the victory.pit file and different tar files but that doesn't work either. I tried using the update.zip EI22 file using CLOCKWORK RECOVERY but it keeps saying "Installation Aborted".
Can someone help please???
Try a better cable, try it with the battery and sd card out using the computer as a power source, also try removing the md5 extension from the file. And it is not bricked as long as it has life. Brick is brick. Yours is sponged.
OMGGGGGG THANK YOUUUUUU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!. I took out the battery and SD card and tried ODIN and it worked. You are awesome my virtual friend.
charlesx123 said:
OMGGGGGG THANK YOUUUUUU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!. I took out the battery and SD card and tried ODIN and it worked. You are awesome my virtual friend.
Click to expand...
Click to collapse
Glad to help. Odin can be finicky. One phone I have only succeeds if I cradle it in my hand and whisper it will be alright while Odining.
kennyglass123 said:
Glad to help. Odin can be finicky. One phone I have only succeeds if I cradle it in my hand and whisper it will be alright while Odining.
Click to expand...
Click to collapse
I thought I was the only one haha
odin seems to have frozen no blue line on the phone
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-D700-FC09-8Gb-REL.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
I really dont want a brick here any ideas?
zsnethen said:
odin seems to have frozen no blue line on the phone
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-D700-FC09-8Gb-REL.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
I really dont want a brick here any ideas?
Click to expand...
Click to collapse
What cable are you using? Usually this means its stuck and its not going to continue you wont brick it totally pulling it out but you will soft brick it which is fixable by what your doing now. I would suggest pulling it off, go get a good thick cable, and hope that the phone goes into download mode still.
unplugged and got back into download mode odin back to stock. on a different note i'm doing all this to activate my phone on sprint agian is there an easier way?
zsnethen said:
unplugged and got back into download mode odin back to stock. on a different note i'm doing all this to activate my phone on sprint agian is there an easier way?
Click to expand...
Click to collapse
Take it to a sprint store? Probably would be the best bet, but not now that you have soft bricked it. Probably should have asked that before trying to go back to full stock. You could have just flashed a stock gingerbread ROM if you were rooted.
Just get a better cable.
Sent from my SPH-D700 using xda premium
U will be fine. Just pull the battery, put it back in, and boot back into download mode. Just make sure u have a good data cable like blackberry...etc..
Sent from my SPH-D700 using xda premium
Fyi, if u get a diamond and android guy on the screen when booting. Keep battery off for about 5 mins
Sent from my SPH-D700 using xda premium
Hello,
I have been trying to root my galaxy s3 sgh t999v by the root66 method. I have done this method before and then returned to stock, and now choosing to go back to a custom rom. However, this time odin has been failing and not allowing me to root my phone, I am using the right files as well as the stock cable that came with the s3. I have twrp installed by going through odin and installing that. But now it is stuck on either a boot loop or if I try installing the root66 or stock rom it will take me to the stuck in "please connect to kies " recovery mode screen..
Not sure what to do, any help is appreciated thank you
What does it say in odins message box after flashing?
Sent from my SAMSUNG-SGH-I747 using Tapatalk
DocHoliday77 said:
What does it say in odins message box after flashing?
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_T999VVLALH2_T999VYVLALH2_CL1030062_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Heres the exact message
You can't downgrade, that's why you're getting that message. So either flash the same firmware version you had last, or a newer one
Yeah, that's 4.0.4 firmware. Try a more recent build. You can get it from my firmware thread too btw. Should give you a faster download.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Okay will try the same firmware, thanks for the quick replies
I have a bit of a problem, I was on 4.4.2 but I don't see any root66 methods for 4.4.2, will I have to find another method?
Oh ok. Didn't realize you were on the latest, sorry. Flash the official firmware and then root with Towelroot. I have a thread for this in the General section.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Thanks a lot! It worked Really appreciate the help
No problem! Glad to hear it!
Sent from my SAMSUNG-SGH-I747 using Tapatalk
I got a hold of a sprint s3 sph-l710 that has freedompop on it and wanted to flash it back to sprint stock firmware, during the flash in odin it got stuck at boot.img for about 4 hours so i finally stopped it. now the phone won't boot, it says upgrade encounted an error and to recover in kies. I dowloaded kies and it won't even find the phone. I can still get into download mode but it keeps hanging up now at sbl2.mbn. I've tried 3 different computer 3 different operating systems 2 different sync cords and all the usb ports on the computers and it still gets hung up. Also if it matters I don't think usb debugged mode was enabled and now I can't enable it since I can't boot into android. Any ideas would be great.
here's the log file from odin
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L710VPUDND8_L710SPRDND8_L710VPUDND8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
Click to expand...
Click to collapse
Maybe try the latest nj2 firmware instead of nd8. http://forum.xda-developers.com/showthread.php?p=58297282
Worth a shot.
madbat99 said:
Maybe try the latest nj2 firmware instead of nd8. http://forum.xda-developers.com/showthread.php?p=58297282
Worth a shot.
Click to expand...
Click to collapse
Thanks I actually got it going. I was at a gas station and they had sync cables for $3 next to the checkout figured for $3 i'd give it a shot, got home started up odin, passed no problems
hey i know its not the same but i bricked my s3 as well (sprint) and before that happened i removed the power button because it was deffective. I can still get to download mode and trying to go to fastboot only brings up the firmware faulty screen. Is there anyway to fix this?
My SM-T110 is stuck in bootloop. I can use download mode and not recovery.
I have tried so far:
1) Start in recovery mode by pressing vol up, home and power buttons at once.. i get a dead android logo and "NO COMMAND"
2) Flash new firmware by downloading stock software and using ODIN for flashing. It fails.
3) Install TWRP and CWM - again both fail with ODIN.
I tried 3 different cables with odin but get same result.
I googled for days and had no luck so i hope you can help me.
ccsrichman said:
My SM-T110 is stuck in bootloop. I can use download mode and not recovery.
I have tried so far:
1) Start in recovery mode by pressing vol up, home and power buttons at once.. i get a dead android logo and "NO COMMAND"
2) Flash new firmware by downloading stock software and using ODIN for flashing. It fails.
3) Install TWRP and CWM - again both fail with ODIN.
I tried 3 different cables with odin but get same result.
I googled for days and had no luck so i hope you can help me.
Click to expand...
Click to collapse
what version of Odin are you using?
Give THIS version a try.
If it fails, post a screenshot of Odin.
I tried 3.09, 1.something and now yours 3.07.. still no luck. I cant upload a screenshot because im a new user. but thats what it says with 3.07
I have auto reboot and f reset time on. nothing else and i chose PDA which is for my region and for sm-t100
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T110XXUANI9_T110SEBANH2_T110XXUANI9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> timh.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> obm.bin
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
ccsrichman said:
I tried 3.09, 1.something and now yours 3.07.. still no luck. I cant upload a screenshot because im a new user. but thats what it says with 3.07
I have auto reboot and f reset time on. nothing else and i chose PDA which is for my region and for sm-t100
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T110XXUANI9_T110SEBANH2_T110XXUANI9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> timh.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> obm.bin
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I've seen other people have success by trying different cables or sometimes even other computers. Other than that, I have no other ideas.
Anybody else has any ideas ?
gr8nole said:
I've seen other people have success by trying different cables or sometimes even other computers. Other than that, I have no other ideas.
Click to expand...
Click to collapse
BTW Odin is written in white in download mode not red as others have.. and when i try to use odin the upper left corner goes paritially black.. like theres a black box covering half of the text there
ccsrichman said:
BTW Odin is written in white in download mode not red as others have.. and when i try to use odin the upper left corner goes paritially black.. like theres a black box covering half of the text there
Click to expand...
Click to collapse
And the text there is:
ODIN MODE
PRODUCT NAME: SM-T110
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
nothing else
Also a newbie with the Tab TM-110
Hi there
Since we are not many here with our device i thought i should send you a message.
Unfortunately i do not have a solution for your problem but maybe it helps if you take a look at what i experienced so far.
I hope you can find my Thread by my profile.
Have you tried to use a different PC yet for flashing with Odin? Would be interesting to know if it helped.
So. Don`t give up. There will be a solution. :good:
Naturestone
I'm having the same issue, anyone can help?
same error GT-I8200 2ND partition error