Develop Bugs

[Q] GT-N7100 ROM and PIT failure feedback

I've just lost my Samsung note, after a hard reboot when the phone locked I got a dead system. Tried to boot into the reset menu but got the Odin menu by mistake, after which I hard reset the phone again, but this time it won't boot past the SGN2 Boot screen. I've gone through all the stuff of trying to re-install the phone with a ROM but it moan I had no PIT, so I found one. Still though it won't go past in setting of the partition... it might need a long time to set-up, but I have no idea as after a hour its still leaving the same message. I'm going to leave it overnight, but I would love some feed back to those that have done this before.
Last status in Odin3 -
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_VZW_stock_system.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..

Well I left it running over night and still nothing... So far I have tried it with PIT_N7100_16GB_20121102 and it just never gets any further. So I can only assume that I'm making a mistake getting this on the system. Going to have another search later to see if their are any other methods of restoring the phone.

It's really bad sign and I suspect SDS
Can you give more details what exactly happened, how the issue started?
You are on which rom, when this happened?
Sent from my GT-N7100 using xda premium

dr.ketan said:
It's really bad sign and I suspect SDS
Can you give more details what exactly happened, how the issue started?
You are on which rom, when this happened?
Click to expand...
Click to collapse
The phone is completely stock, which it why this has rather confused me. All I know is that it was working all OK, hun and wouldn't respond, so I reset it with a battery pull. On starting it up the phone wouldn't move past the 'Samsung' boot screen. So I tried to boot into the recover to reset the system and end up in the Odin mode by mistake, but since then the phone now won't move past the SNGT-7100 Screen. Plugging it into Odin and trying to install the stock ROM again it told me I had no PIT, so I have tried to apply a number but they all fail.
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Set PIT file..
<ID:0/012> DO NOT TURN OFF TARGET!!
<ID:0/012>
<ID:0/012> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried the PIT_N7100_16GB_20121102.pit and sch-i605-16gb.pit
I'm rather stuck as to whether there is another method I can try or should just give up and take it back to Phones4u to get it replace via the warrenty as I've only had it since just before Xmas.

It seems SDS purely, don't do anything, particularly which raise flash counter and just submit to service centre.
Sorry man but it's seems nothing but SDS, you may not have updated to latest 4.1.2,which believed to have fixed for it
Goodluck
Sent from my GT-N7100 using xda premium

I'm just reading up on SDS... thats rather annoying. Well off to Phone4u then. Thanks for your help.

On which rom were you before all this happened?
Sent from my GT-N7100 using xda app-developers app

I have the same problem on stock rooted rom. Phone was working perfectly. Retarted and now nothing
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_XEF_N7100OXADLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Sds
Sent from my GT-N7100 using xda premium

[Q] How long does updating bootloader take?

I'm updating to the newest bootloader and I've been waiting on Odin to finish for the last 5 minutes. Does it really take that long? What should I do? Here are the messages from odin:
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_aio.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn

I took a risk and unplugged it. The phone boots to cyanogenmod like nothing happened fortunately. I tried to update again and it's still not working. Any ideas?

It really shouldn't take more than 10min.
Sent from my Galaxy Nexus using xda app-developers app

I switched to a different usb cable and a different usb port and it worked. Unfortunately I don't know if it was the cable or the phone since I switched both.

[Q] Sprint Note II Bricked, HELP!!!

I have had my Note II before it was even released in the US, Thank you Samsung but it has been on the Samsung Screen for 3 days and Im losing it slowing with trying everything on different post and different videos with the same result. Grrrrrrr I used Galaxy Note II toolkit when it became available and was the easiest root ever. Didnt do anything extreme or make any changes other than root for hotspot. All of a sudden a year later it powers off one night and I woke to the samsung screen of hell. I popped out the battery and reinserted but to my dismay in the morning, samsung screen again. I have downloaded SPH-L900_MA7_Rooted_Nodata.tar, SPH-L900_MA7_Stock_Nodata.tar and L900VPUBMK4_L900SPTBMK4_HOME.tar. Im using Odin v3.07 and I get FAILED everytime no matter which .tar i use !! The message I get is " There is no PIT Partition" . I have been using xda for years being was always receiving free phones due to my old career but this situation has me stumped so I am officially a noob today. Please Help!!!! What am I dont wrong?

Odin OneClick Fail
I followed the guide " I bricked my Sprint Samsung Note II SPH-L900 and this is how I fixed it" above using Odin OneClick MA5 restore and this is the result I get everytime in ODIN. My issue is not solved.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004>
<OSM> All threads completed. (succeed 0 / failed 1)

kevo7000 said:
I followed the guide " I bricked my Sprint Samsung Note II SPH-L900 and this is how I fixed it" above using Odin OneClick MA5 restore and this is the result I get everytime in ODIN. My issue is not solved.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004>
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I just ran into the same problem with my brothers phone, now I am trying to restore it

[Q] Stuck on boot screen

Hi guys, am sorry if this is a repeat post I've been looking for a solution but haven't found one. So my note II was on my desk when it suddenly rebooted, but now its stuck on the Smasung GALAXY Note II GT-N7100 screen. Holding the Vol up + home + power buttons does nothing but reboot and take me back to the stuck screen. I can though reach the download mode with vol down + home + power, my phone is rooted. Any help would be appreciated thanks in advance.
PS: Sorry if bad grammar english is not my 1st language

meanbluepanda said:
Hi guys, am sorry if this is a repeat post I've been looking for a solution but haven't found one. So my note II was on my desk when it suddenly rebooted, but now its stuck on the Smasung GALAXY Note II GT-N7100 screen. Holding the Vol up + home + power buttons does nothing but reboot and take me back to the stuck screen. I can though reach the download mode with vol down + home + power, my phone is rooted. Any help would be appreciated thanks in advance.
PS: Sorry if bad grammar english is not my 1st language
Click to expand...
Click to collapse
Only option is to Flash stock firmware via ODIN.
Sent from my GT-N7100 using Tapatalk

108
ceomaverick said:
Only option is to Flash stock firmware via ODIN.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
I tried to flash the 4.4.2 kitkat firmware and got this in odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFNE1_N7100VFGFNE2_N7100BUUFND2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT: Now after posting this it tells me USB unrecognized, I have tried installing the samsung drivers, but they're not working.

meanbluepanda said:
I tried to flash the 4.4.2 kitkat firmware and got this in odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFNE1_N7100VFGFNE2_N7100BUUFND2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT: Now after posting this it tells me USB unrecognized, I have tried installing the samsung drivers, but they're not working.
Click to expand...
Click to collapse
Well, if u cant connect to PC. Not much can be done. If somehow u connect, get a pit file for your device and flash it.
Sent from my GT-N7100 using Tapatalk

Can't seem to root via CF-Auto Root w/ new Galaxy Note 4 (SM-N910P)

I run Odin as usual, and it's stuck at Downloadin... Do not turn off target!! with the blue bar not moving and only showing the first little bit.
Odin doesn't do anything either, and only shows:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-trltespr-trltespr-smn910p.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
After sitting for about 20 minutes.
I've unplugged it and restarted and of course nothing is different. I'm not sure what to do from here. I just want to get rid of all these Sprint apps.

PwnCloud said:
I run Odin as usual, and it's stuck at Downloadin... Do not turn off target!! with the blue bar not moving and only showing the first little bit.
Odin doesn't do anything either, and only shows:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-trltespr-trltespr-smn910p.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
After sitting for about 20 minutes.
I've unplugged it and restarted and of course nothing is different. I'm not sure what to do from here. I just want to get rid of all these Sprint apps.
Click to expand...
Click to collapse
Samsung driver installed? Do you have any open KIES or Samsung Smart Switch apps open? They should be closed first.
If you're using Windows 10, run as administrator is NOT required. But all other Windows versions SHOULD be ran as administrator with a right click on the Odin .exe file for app launch.
You seem to get to write and fail in Odin. Could be bad USB cable or missing the data lines in it. Original Samsung cable or a Motorola USB cable should work. Try another PC USB port as well. Rear port is often recommended but should be USB 2.0 compatible.
When and if it fails again, check your phone's display for additional information. It's a common failure in our forum for users to flash with reactivation lock enabled. But you could verify in Settings/Security that reactivation lock is disabled.
I prefer a md5 to verify my download but on the case of Chainfire downloads, download twice and check the md5 of both for matching md5. You could have a bad download.
Just typical things to check.
Since you mentioned wanting to remove bloat, have you considered just getting a package disabler from Google Play? I don't use them or know where to get a free one but here's one on sale with 7 day guaranteed refund.
https://play.google.com/store/apps/details?id=com.kunkunsoft.packagedisabler

I think you can get root by odin twrp recovery and then then flash super su
For debloat
http://forum.xda-developers.com/note-4/snapdragon-dev/tool-smartdebloater-v1-t2918623