I've just lost my Samsung note, after a hard reboot when the phone locked I got a dead system. Tried to boot into the reset menu but got the Odin menu by mistake, after which I hard reset the phone again, but this time it won't boot past the SGN2 Boot screen. I've gone through all the stuff of trying to re-install the phone with a ROM but it moan I had no PIT, so I found one. Still though it won't go past in setting of the partition... it might need a long time to set-up, but I have no idea as after a hour its still leaving the same message. I'm going to leave it overnight, but I would love some feed back to those that have done this before.
Last status in Odin3 -
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_VZW_stock_system.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
Well I left it running over night and still nothing... So far I have tried it with PIT_N7100_16GB_20121102 and it just never gets any further. So I can only assume that I'm making a mistake getting this on the system. Going to have another search later to see if their are any other methods of restoring the phone.
It's really bad sign and I suspect SDS
Can you give more details what exactly happened, how the issue started?
You are on which rom, when this happened?
Sent from my GT-N7100 using xda premium
dr.ketan said:
It's really bad sign and I suspect SDS
Can you give more details what exactly happened, how the issue started?
You are on which rom, when this happened?
Click to expand...
Click to collapse
The phone is completely stock, which it why this has rather confused me. All I know is that it was working all OK, hun and wouldn't respond, so I reset it with a battery pull. On starting it up the phone wouldn't move past the 'Samsung' boot screen. So I tried to boot into the recover to reset the system and end up in the Odin mode by mistake, but since then the phone now won't move past the SNGT-7100 Screen. Plugging it into Odin and trying to install the stock ROM again it told me I had no PIT, so I have tried to apply a number but they all fail.
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Set PIT file..
<ID:0/012> DO NOT TURN OFF TARGET!!
<ID:0/012>
<ID:0/012> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried the PIT_N7100_16GB_20121102.pit and sch-i605-16gb.pit
I'm rather stuck as to whether there is another method I can try or should just give up and take it back to Phones4u to get it replace via the warrenty as I've only had it since just before Xmas.
It seems SDS purely, don't do anything, particularly which raise flash counter and just submit to service centre.
Sorry man but it's seems nothing but SDS, you may not have updated to latest 4.1.2,which believed to have fixed for it
Goodluck
Sent from my GT-N7100 using xda premium
I'm just reading up on SDS... thats rather annoying. Well off to Phone4u then. Thanks for your help.
On which rom were you before all this happened?
Sent from my GT-N7100 using xda app-developers app
I have the same problem on stock rooted rom. Phone was working perfectly. Retarted and now nothing
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_XEF_N7100OXADLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Sds
Sent from my GT-N7100 using xda premium
Related
odin seems to have frozen no blue line on the phone
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-D700-FC09-8Gb-REL.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
I really dont want a brick here any ideas?
zsnethen said:
odin seems to have frozen no blue line on the phone
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-D700-FC09-8Gb-REL.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
I really dont want a brick here any ideas?
Click to expand...
Click to collapse
What cable are you using? Usually this means its stuck and its not going to continue you wont brick it totally pulling it out but you will soft brick it which is fixable by what your doing now. I would suggest pulling it off, go get a good thick cable, and hope that the phone goes into download mode still.
unplugged and got back into download mode odin back to stock. on a different note i'm doing all this to activate my phone on sprint agian is there an easier way?
zsnethen said:
unplugged and got back into download mode odin back to stock. on a different note i'm doing all this to activate my phone on sprint agian is there an easier way?
Click to expand...
Click to collapse
Take it to a sprint store? Probably would be the best bet, but not now that you have soft bricked it. Probably should have asked that before trying to go back to full stock. You could have just flashed a stock gingerbread ROM if you were rooted.
Just get a better cable.
Sent from my SPH-D700 using xda premium
U will be fine. Just pull the battery, put it back in, and boot back into download mode. Just make sure u have a good data cable like blackberry...etc..
Sent from my SPH-D700 using xda premium
Fyi, if u get a diamond and android guy on the screen when booting. Keep battery off for about 5 mins
Sent from my SPH-D700 using xda premium
Hey there everyone, long time reader, first time poster. So i have a att SGH-i747 that now wont let me boot up the phone, i can get into clockwork recovery and download mode but that's it. I have been at this for about the last 8 hrs reading all the post I can find and watching every video, all which are about the same. I had a custom 4.0.4 on and was wanting to go back to factory and some where in between killed the phone. I have Odin 3.0.7 and it recognizes my phone when its in download mode. I have downloaded I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 and I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 in hopes of sticking them in the PDA slot and clicking start to solve the problem. Well unfortunately I have only seen any movement of the status bar up top once , and then it stopped and will turn red and say failed. when I run one of them this is what I get :
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and this when I try the other firmware:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
....all the videos i have watched (about 150) never show any errors like this, just not sure what I am to do or what I am doing wrong, so must now turn to the community here at Xda. I feel as I am doing exactly what i see others doing and I feel i have the right software. Thanks so much in advance!
You might want to reinstall your USB drivers to Windows and then try again.
http://downloadcenter.samsung.com/c...ng_USB_Driver_for_Mobile_Phones_v1.5.14.0.exe
Sent from my SAMSUNG-SGH-I747 using xda premium
I have had my Note II before it was even released in the US, Thank you Samsung but it has been on the Samsung Screen for 3 days and Im losing it slowing with trying everything on different post and different videos with the same result. Grrrrrrr I used Galaxy Note II toolkit when it became available and was the easiest root ever. Didnt do anything extreme or make any changes other than root for hotspot. All of a sudden a year later it powers off one night and I woke to the samsung screen of hell. I popped out the battery and reinserted but to my dismay in the morning, samsung screen again. I have downloaded SPH-L900_MA7_Rooted_Nodata.tar, SPH-L900_MA7_Stock_Nodata.tar and L900VPUBMK4_L900SPTBMK4_HOME.tar. Im using Odin v3.07 and I get FAILED everytime no matter which .tar i use !! The message I get is " There is no PIT Partition" . I have been using xda for years being was always receiving free phones due to my old career but this situation has me stumped so I am officially a noob today. Please Help!!!! What am I dont wrong?
Odin OneClick Fail
I followed the guide " I bricked my Sprint Samsung Note II SPH-L900 and this is how I fixed it" above using Odin OneClick MA5 restore and this is the result I get everytime in ODIN. My issue is not solved.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004>
<OSM> All threads completed. (succeed 0 / failed 1)
kevo7000 said:
I followed the guide " I bricked my Sprint Samsung Note II SPH-L900 and this is how I fixed it" above using Odin OneClick MA5 restore and this is the result I get everytime in ODIN. My issue is not solved.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004>
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I just ran into the same problem with my brothers phone, now I am trying to restore it
Good afternoon, and thank you for taking your time to read my thread.
I recently attempted to root my phone, and having little to no issue rooting many other devices (including my previous phone, a Galaxy Prevail) I decided I was fed up with the bloatware.
I began the process, but encountered an issue where ODIN failed while attempting to root the device.
I am not 100% sure, but I know this information may very well help me to a solution: I don't think I enabled debug mode in settings.
When attempting to use KIES to restore firmware, I get a "this device is not recognized" error, and even when trying to manually enter S/N and device info, it will not let me use any part of KIES to restore it.
So I then tried to use ODIN to flash stock firmware...
First error I receive is almost immediate:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
Occasionally, and after about 3 minutes this appears. (and it seems only when attempting to use ODIN on the device multiple times before reboot)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please, if you have any advice for me I am begging.. I only was able to upgrade to this device because of a promotion AT&T had to get it for $5 dollars.. I am very income restricted so buying a new device is a crippling idea. If you do by chance suggest I download a new version of ODIN ( I am using 3.07, I find it most stable) or a new stock firmware etc, please provide links as I have attempted many different mirrors (with horrendous download speeds) for different stock recovery firmware.
THANK YOU!!!
I appreciate your time.. All it took was attempting to root the phone another time to restore access... Wow.. I hate myself ._.
Vonzilla said:
I appreciate your time.. All it took was attempting to root the phone another time to restore access... Wow.. I hate myself ._.
Click to expand...
Click to collapse
So, what's the state of the phone now and what happens when you try to power on? Is it now booting normally to system?
Hello, i have one piece n7100 16gb that was stuck on repair mode...i tried to repair it with odin on windows 10 detected the device but fail: Used Odin3_v3.10.7 and N7100XXUFNL1_N7100OJVFOD1_LYS
Tried on windows xp still fail same..
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Tried flashing with 16gb pit file...fail now when turn on phone shows grey screen but goes into download mode....help
andrew21 said:
Hello, i have one piece n7100 16gb that was stuck on repair mode...i tried to repair it with odin on windows 10 detected the device but fail: Used Odin3_v3.10.7 and N7100XXUFNL1_N7100OJVFOD1_LYS
Tried on windows xp still fail same..
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Tried flashing with 16gb pit file...fail now when turn on phone shows grey screen but goes into download mode....help
Click to expand...
Click to collapse
search for note 2 partition problem, there are multiple guidea on xda. keep trying with different versions of odin and roms from sammobile
yaro666 said:
search for note 2 partition problem, there are multiple guidea on xda. keep trying with different versions of odin and roms from sammobile
Click to expand...
Click to collapse
Hello, when i go into download mode i get following info:
Product Name: GT-N7100
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Custom
KNOX WARRANTY VOID: 0
RP SWREV:
ALso, i tried flashing 4 files with odin, i get following log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_OJV_N7100OJVDMB1_679347_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
i forgot to mention i flashed only the folllowing pit file: PIT_N7100_16GB_20121102 with Odin3_v3.10.7 after which i get grey screen when i switch on the mobile, but i can still go into download mode....pleeeeaaasssee help
Also need to inform im using windows 10 but with correct drivers and connects with odin.
Cant anyone please help me...tried different roms and firmware still same problem...
I believe the eMMC chip has failed. The same happened to my phone and the service guy said i needed a new motherboard.
Some say it may also be a corrupted bootloader, which i have had no luck in fixing.
Wish i could help
It's ok thanks for informing me at least
Love to hear if you get it up and running again
I would love that too but don't have any solutions at the moment