Hi. i'm trying to revert from MIUI to the stock ROM, but it is not working, it says E: signature failed
I'm using the the touch recovery... I have tried with three different official ROMs(B111, 112 and 118) but none is workin.
Plese, help me because I really need the stock ROM (I need Whatsapp). Thank you very much!
I don't think you can flash stock ROM with CWM. Use update through Settings -> About phone -> System update.
Make sure UPDATE.APP is in dload folder in your SD card.
Sent from my P6-U06 using Tapatalk
You should use stock Recovery instead of TWRP to install stock rom. Place the "dload" folder from the official zip file to your SD card. Turn off your phone, and boot holding all 3 buttons (power, volume + and volume -). Once the phone boots, release power button and continue holding volume + and - buttons. The phone should boot into stock recovery and install the stock ROM automatically.
Related
Hey Guyzzz,
I m preparing a guide how to root and install cwm.............
You just need brains, the files mentioned in the attachment and a minute......
How to:
Install CWM
1. Unlock bootloader from http://www.htcdev.com...
2. After downloading the recovery file, extract it anywhere, connect your phone(it should be switched off), open recovery.bat.
3. And here you go... CWM is installed
Root it
1. After installin CWM, copy the root.zip file into your sd card.
2. Then power off your phone and press volume down+power button.
3. It will scan for some PG...zip files so see to it that there isnt any such file.
4. Then go to recovery by using volume keys.
5. After going to CWM then choose install from sdcard, then choose zip, then navigate to the zip file and click yes.
6. There you go your phone is rooted..
7. And then update the superuser from Play Store and su binary
Install custom ROM
1. After installin CWM, and root.zip, copy any custom ROM file into your sd card.
2. Then power off your phone and press volume down+power button.
3. It will scan for some PG...zip files so see to it that there isnt any such file.
4. Then go to recovery by using volume keys.
5. After going to CWM go to advance wipe dalvik cache and battery stats and go back and wipe cache and factory data reset.
6. Then choose install from sdcard, then choose zip, then navigate to the zip file and click yes.
6. There you go Custom ROM is installed.
For Video Guide how to install cwm see This
THEN INSTALL ANY CUSTOM ROM YOU LIKE...
HOPE I HELPED YOU:good:
As far as i remember 5.0.2.6 version of CWM had problems with charging while being off ( led would stay orange eventho phone was fully charged ).
5.0.2.8 doesnt have this problem, you can get it here http://forum.xda-developers.com/showthread.php?t=1469928
Yasounet said:
As far as i remember 5.0.2.6 version of CWM had problems with charging while being off ( led would stay orange eventho phone was fully charged ).
5.0.2.8 doesnt have this problem, you can get it here http://forum.xda-developers.com/showthread.php?t=1469928
Click to expand...
Click to collapse
Same with 6.0 ports
Sent from my Baconator Over-9000 or my Gmail phone based off iOS based off Android based off Amazon OS based off BlackBerry OS based off Pacman based off Windows 9
Hi all and sory about my bad english,
I tryed to flash MIUI rom, and i made a few mistake and now i am stack at boot logo. But it working at bootloader mode. Can anyone help me how to install and run cwm recovery with fastboot commands.
bariskoca said:
Hi all and sory about my bad english,
I tryed to flash MIUI rom, and i made a few mistake and now i am stack at boot logo. But it working at bootloader mode. Can anyone help me how to install and run cwm recovery with fastboot commands.
Click to expand...
Click to collapse
Download the stock firmware and put dload folder in SD card. After that switch OFF the phone. Push at same time power and two volume buttons, phone will reboot in stock recovery and flash of stock ROM will start automatically.
After that you can try again to flash MIUI ROM.
alex.79 said:
Download the stock firmware and put dload folder in SD card. After that switch OFF the phone. Push at same time power and two volume buttons, phone will reboot in stock recovery and flash of stock ROM will start automatically.
After that you can try again to flash MIUI ROM.
Click to expand...
Click to collapse
Is it works even its stock recovery does not work. I mean, i am restarting phone by holding volume up and volume down buttons at the same time but Huawei original recovery mode not working. And would you please give me link of that stock rom.
bariskoca said:
Is it works even its stock recovery does not work. I mean, i am restarting phone by holding volume up and volume down buttons at the same time but Huawei original recovery mode not working. And would you please give me link of that stock rom.
Click to expand...
Click to collapse
I had the same problem after unsuccessfully installing MIUI. Huawei recovery didn't start, it just kept showing MIUI boot logo, and the updater launched but didn't do anything. I managed to get it working by formatting my SD and putting stock rom on it. Then the updater launched, recognised the update.app and the rest went smoothly.
Here you can download stock HUAWEI ROM: http://www.huaweiblog.de/downloads/ascend-p6-downloads/
Recovery which you use to flash MIUI is a temporally. It not affect your stock recovery. On my phone this method work perfect. Push all buttons in same time until stock recovery it start.
kaspars_l said:
I had the same problem after unsuccessfully installing MIUI. Huawei recovery didn't start, it just kept showing MIUI boot logo, and the updater launched but didn't do anything. I managed to get it working by formatting my SD and putting stock rom on it. Then the updater launched, recognised the update.app and the rest went smoothly.
Click to expand...
Click to collapse
Would you please give me link of that update.app file?
alex.79 said:
Here you can download stock HUAWEI ROM: http://www.huaweiblog.de/downloads/ascend-p6-downloads/
Recovery which you use to flash MIUI is a temporally. It not affect your stock recovery. On my phone this method work perfect. Push all buttons in same time until stock recovery it start.
Click to expand...
Click to collapse
Doesnt start huawei recovery. There is only boot logo "HUAWEI Ascend"
bariskoca said:
Would you please give me link of that update.app file?
Click to expand...
Click to collapse
Unzip this and put the dload folder on your SD
http://dl.huaweinews.com/Roms/Ascend-P6/B118.zip
kaspars_l said:
Unzip this and put the dload folder on your SD
http://dl.huaweinews.com/Roms/Ascend-P6/B118.zip
Click to expand...
Click to collapse
I will try it. Thak you very much all.
bariskoca said:
Doesnt start huawei recovery. There is only boot logo "HUAWEI Ascend"
Click to expand...
Click to collapse
Recovery will start a few seconds after HUAWEI logo. But first turn off the phone and after that push and hold all button while recovery start.
kaspars_l said:
Unzip this and put the dload folder on your SD
http://dl.huaweinews.com/Roms/Ascend-P6/B118.zip
Click to expand...
Click to collapse
Unzipped files to sdcard. Restarted phone by holding power button and volume up + volume down buttons. Nothing happend. Still stacked at Boot Logo. Even i cant switch off phone. when i hold power button its only restarting.
Damn, then I have no idea what to do. Lets hope you haven't bricked it and someone can come up with a solution.
kaspars_l said:
Damn, then I have no idea what to do. Lets hope you haven't bricked it and someone can come up with a solution.
Click to expand...
Click to collapse
Oh now something happend. I connected the phone to charge. Then i tryed to recover. First time came up lines from up to down. Tryed again. Now writing on screen but doing nothing;
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is LOCK state.
Then restarted phone by holding power button. HUAWEI recovery worked. But it didnt update phone. I choosed apply update from extenal storage, entered dload directory. But i couldnt see update.app file. Returned back entered again to update from external storage even didnt show dload directory. What should i do now.
Download ROM, unzip and you see dload folder with UPDATE.APP inside. Put dload folder in main directory on SD card via PC. Put the card on the phone. Push all buttons (power, volume up, volume down) at same time while phone is reboot on stock recovery. After that HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0 will find UPDATE.APP in dload folder automatically and flash process will start.
bariskoca said:
Oh now something happend. I connected the phone to charge. Then i tryed to recover. First time came up lines from up to down. Tryed again. Now writing on screen but doing nothing;
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is LOCK state.
Then restarted phone by holding power button. HUAWEI recovery worked. But it didnt update phone. I choosed apply update from extenal storage, entered dload directory. But i couldnt see update.app file. Returned back entered again to update from external storage even didnt show dload directory. What should i do now.
Click to expand...
Click to collapse
Oh, this is where I was stuck for a while. This is where I formatted my SD and copy the dload folder to SD. Then the update happened.
Yes now it worked thanks all of you and xda.
Sent from my HUAWEI P6-U06 using xda app-developers app
Hello Com ,
i had a big problem with my Ascend P6 and i need quikly help!!
I had installed the Clean ROM from Android Development ... after i installed the ROM my
Phone frozed in the boot screen "Huawei Ascend P6" .
Now I only come into the Android System Recovery <3e>
I had tried to install an ROM over the button "Apply update from external storage" but it says:
E: failed to verify whole-file signature
---
I tried to come into the download mode to flash an recovery with odin but it only goes into the recovery mode.
Please help me with my problem its very important thanks for your patient.
Sorry for my bad english
Do you have a stock recovery on the phone?
If Yes, turn off the phone > remove SD card > put in your PC and make dload folder with update.app inside > put it back in the phone > push and hold all three buttons (power, volume up and volume down) at same time while automatic flash does not start.
If don't have the stock recovery, try to flash it first and after that follow this steps.
alex.79 said:
Do you have a stock recovery on the phone?
If Yes, turn off the phone > remove SD card > put in your PC and make dload folder with update.app inside > put it back in the phone > push and hold all three buttons (power, volume up and volume down) at same time while automatic flash does not start.
If don't have the stock recovery, try to flash it first and after that follow this steps.
Click to expand...
Click to collapse
Thanks for your answer . This is what i should had to do .
My phone works now on B111
Perfects thanks much !
Slickx1337 said:
Thanks for your answer . This is what i should had to do .
My phone works now on B111
Perfects thanks much !
Click to expand...
Click to collapse
You're welcome
alex.79 said:
Do you have a stock recovery on the phone?
If Yes, turn off the phone > remove SD card > put in your PC and make dload folder with update.app inside > put it back in the phone > push and hold all three buttons (power, volume up and volume down) at same time while automatic flash does not start.
If don't have the stock recovery, try to flash it first and after that follow this steps.
Click to expand...
Click to collapse
I tried what you have here, and the update finishes successfully. However, when I reboot my P6, it gets stuck on the boot animation :S
I tried installing B111, B118 and B122 onto the phone, but they all fail to boot. Is there something i am doing wrong or is there any other way to try to fix this?
Hi!
So there is my problem:
I upgraded to KitKat and tryed to install gapps but then everything f* up. So with TWRP I tried to install B125 but it didn't work so I put this B111 on my phone than I tried to install it but it failed and TWRP says that there isn't OS on my phone
Also I don't have any sd card..
What can i do?
maticex said:
Hi!
So there is my problem:
I upgraded to KitKat and tryed to install gapps but then everything f* up. So with TWRP I tried to install B125 but it didn't work so I put this B111 on my phone than I tried to install it but it failed and TWRP says that there isn't OS on my phone
Also I don't have any sd card..
What can i do?
Click to expand...
Click to collapse
Go get an SD CARD from someone and put on it B125 International Version or any other ROM for that matter, and do it fast until your phone runs out of battery. Put update.app in dload folder. You can do it through adb and fastboot, but the safest way is the way that I have just told you. And after that press the Power button and volume up/down at once, all of them until stock recovery starts updating/upgrading... well installing the new ROM, I hope you still have stock recovery.
So when I put it in dload and put it in phone what next?
maticex said:
So when I put it in dload and put it in phone what next?
Click to expand...
Click to collapse
Press the Power button and volume up/down at once, all of them until stock recovery starts. If you only have TWRP find a flashable ROM that is a ZIP, and flash it through TWRP.
ZuperStyler said:
Press the Power button and volume up/down at once, all of them until stock recovery starts. If you only have TWRP find a flashable ROM that is a ZIP, and flash it through TWRP.
Click to expand...
Click to collapse
I have b111.zip in my internal storage if it helps?
maticex said:
I have b111.zip in my internal storage if it helps?
Click to expand...
Click to collapse
You must move it to an SD CARD, get one from someone just to restore your phone.
ZuperStyler said:
You must move it to an SD CARD, get one from someone just to restore your phone.
Click to expand...
Click to collapse
Do you know any B125 firmware which is in zip? not APP. file
maticex said:
Do you know any B125 firmware which is in zip? not APP. file
Click to expand...
Click to collapse
i advise you to flash this ROM, try it. http://forum.xda-developers.com/showthread.php?t=2585783 Must work since you had KitKat, your bootloader must be unlocked. Try CyanogenMod 10.1 following the instructions. But again, use an SD CARD.
ZuperStyler said:
i advise you to flash this ROM, try it. http://forum.xda-developers.com/showthread.php?t=2585783 Must work since you had KitKat, your bootloader must be unlocked. Try CyanogenMod 10.1 following the instructions. But again, use an SD CARD.
Click to expand...
Click to collapse
I'll try probably
maticex said:
I'll try probably
Click to expand...
Click to collapse
Try ? LOL Any ROM is good to put your phone into a workable state. After that, install whatever ROM you like.
I understood that this ROM can be instaled only via CN 118?
maticex said:
I understood that this ROM can be instaled only via CN 118?
Click to expand...
Click to collapse
I had B125 International Locked and then I flashed KitKat, and after that CyanogenMod 10.1 and worked. Now, fell free to try what you want, but if you want to be safe install stock recovery if you don't have it anymore and upgrade from dload folder B125. All the info you want you can find on XDA. Just search what you need.
ZuperStyler said:
I had B125 International Locked and then I flashed KitKat, and after that CyanogenMod 10.1 and worked. Now, fell free to try what you want, but if you want to be safe install stock recovery if you don't have it anymore and upgrade from dload folder B125. All the info you want you can find on XDA. Just search what you need.
Click to expand...
Click to collapse
Do you maybe have original stock recovery file and do I just flash it with TWRP?
maticex said:
Do you maybe have original stock recovery file and do I just flash it with TWRP?
Click to expand...
Click to collapse
But you don't have an OS.
Put your device in fastboot mode ( > adb reboot bootloader )
Extract recovery.img from archive
fastboot flash recovery recovery.img ;
fastboot reboot ;
Tell me what stock recovery do you want.
Place the ZIP with the recovery let's say on Local Disk ( C: ) Create a folder and name it fastboot. Put the recovery ZIP in that folder. After that connect your phone to the PC, now press shift and right click on your mouse or on your laptop and press Open Command Window here. There you write adb bootloader and press enter.
fastboot flash recovery recovery.img ;
fastboot reboot ;
defo just get like a 4gb sd card.
Thank you for all I'm on cm now, but I don't like that I can't take photos with it Can I get camera working?
How can I install normal huawei software now?
Revert to stock recovery first.
How can I do this, I don't find threads with how can i do this?
Can I get Camera working there it says that it is working but on my phone gallery chrashes when I open camera app
Use Camera360, works perfectly.
maticex said:
Hi!
So there is my problem:
I upgraded to KitKat and tryed to install gapps but then everything f* up. So with TWRP I tried to install B125 but it didn't work so I put this B111 on my phone than I tried to install it but it failed and TWRP says that there isn't OS on my phone
Also I don't have any sd card..
What can i do?
Click to expand...
Click to collapse
i done someting similar after trying to put b125 back to phone.. well he was stuck at start with huawei logo..anyway i don`t put on my sd card any zip.. i put on main sdcard the folder "dload" and inside that folder was update.app." file
soo... {my phone was freezeing with huawei logo not opening up anymore so i put that folder on sdcard useing diferent phone then i connect phone to usb and hold power putton this way that logo with huaway disear and phone restarted.in that moment i take off finger from power button .and then holding the volume plus minus and again power button . anyway not sure if was needed to conect phone at usb to restart it but for me works }
i done nothing more.. nothing on computer.. the instalation of b125 works normaly directly from that recovery menu
I recently Bricked my Honor 6x while flashing twrp recovery for EMUI 5.x and once the twrp was flashed it would boot loop to recovery every time, tried clearing cache but it just refused to boot to system. Tried numerous update.app and the recovery would pop message incompatible package.
Hence posting the correct link to Update.app and proper procedure to Unbrick your Honor 6X Indian variant.
Download the Firmware file for Honor 6X BLN-L22C675B***
update.zip
BLN-L22_channel_in/update_data_full_BLN-L22_channel_in.zip
You will need a SD card for flashing the above files.
Step 1:
Create a folder dload in the root of your SD card.
Extract the Update.zip contents in the dload folder.
Switch off your phone.
Hold volume + and volume - keys simultaneously along with power key.
Keep pressing the keys unless you see EMUI Logo with a circle.
Wait for couple of minutes let it flash once done your device will restart automatically, do not let it boot to system SHUT DOWN your Device.
Step 2:
Delete all the contents from dload folder on SD card.
Extract the contents from file BLN-L22_channel_in/update_data_full_BLN-L22_channel_in.zip in dload folder on SD card.
Hold volume + and volume - keys simultaneously along with power key.
Keep pressing the keys unless you see EMUI Logo with a circle.
Wait for couple of minutes let it flash once done your device will restart automatically, do not let it boot to system SHUT DOWN your Device.
Step 3:
Hold volume + and power button simultaneously till you enter into recovery which display 3 options Reboot System, Wipe data/factory reset, Wipe cache partition.
Wipe data/factory reset.
Wipe cache partition.
Reboot System now.
System updates are working fine, I was able to update from B320 to B360.
wooo ..that was a good guide bro , you can flash the zips using twrp also so simple.
frist flash the region zip and next update.zip
hi could you update with latest zip updates? i couldnt get any to work. im on bln-l22
venugopalu007 said:
wooo ..that was a good guide bro , you can flash the zips using twrp also so simple.
frist flash the region zip and next update.zip
Click to expand...
Click to collapse
Don't do that. Yes you can flash region zip and update_data_public.zip but not main update.zip it should be extracted and flashed only via dload.
dload method not working
after installing 17% it is showing as process is failed.
BLN-L21 bricked ;-(
I've bricked my BLN-L21C432 I've done rebranding (now I have BLN-L21C10B ) all went well with installing oreo, then I did downgrade in the process I've lost both Erecovery and recovery. I can now only get to the fastboot (unlocked) tried Multi-tool flashing recovery (recovery ramdisk) etc. it's accepting but won't run. now I have an error func no: 11 (recovery image) error no: 2 (load failed).