[Q] P6 Broken by installing ROM - Huawei Ascend P6, Mate

Hello Com ,
i had a big problem with my Ascend P6 and i need quikly help!!
I had installed the Clean ROM from Android Development ... after i installed the ROM my
Phone frozed in the boot screen "Huawei Ascend P6" .
Now I only come into the Android System Recovery <3e>
I had tried to install an ROM over the button "Apply update from external storage" but it says:
E: failed to verify whole-file signature
---
I tried to come into the download mode to flash an recovery with odin but it only goes into the recovery mode.
Please help me with my problem its very important thanks for your patient.
Sorry for my bad english

Do you have a stock recovery on the phone?
If Yes, turn off the phone > remove SD card > put in your PC and make dload folder with update.app inside > put it back in the phone > push and hold all three buttons (power, volume up and volume down) at same time while automatic flash does not start.
If don't have the stock recovery, try to flash it first and after that follow this steps.

alex.79 said:
Do you have a stock recovery on the phone?
If Yes, turn off the phone > remove SD card > put in your PC and make dload folder with update.app inside > put it back in the phone > push and hold all three buttons (power, volume up and volume down) at same time while automatic flash does not start.
If don't have the stock recovery, try to flash it first and after that follow this steps.
Click to expand...
Click to collapse
Thanks for your answer . This is what i should had to do .
My phone works now on B111
Perfects thanks much !

Slickx1337 said:
Thanks for your answer . This is what i should had to do .
My phone works now on B111
Perfects thanks much !
Click to expand...
Click to collapse
You're welcome

alex.79 said:
Do you have a stock recovery on the phone?
If Yes, turn off the phone > remove SD card > put in your PC and make dload folder with update.app inside > put it back in the phone > push and hold all three buttons (power, volume up and volume down) at same time while automatic flash does not start.
If don't have the stock recovery, try to flash it first and after that follow this steps.
Click to expand...
Click to collapse
I tried what you have here, and the update finishes successfully. However, when I reboot my P6, it gets stuck on the boot animation :S
I tried installing B111, B118 and B122 onto the phone, but they all fail to boot. Is there something i am doing wrong or is there any other way to try to fix this?

Related

Stack at Boot Logo

Hi all and sory about my bad english,
I tryed to flash MIUI rom, and i made a few mistake and now i am stack at boot logo. But it working at bootloader mode. Can anyone help me how to install and run cwm recovery with fastboot commands.
bariskoca said:
Hi all and sory about my bad english,
I tryed to flash MIUI rom, and i made a few mistake and now i am stack at boot logo. But it working at bootloader mode. Can anyone help me how to install and run cwm recovery with fastboot commands.
Click to expand...
Click to collapse
Download the stock firmware and put dload folder in SD card. After that switch OFF the phone. Push at same time power and two volume buttons, phone will reboot in stock recovery and flash of stock ROM will start automatically.
After that you can try again to flash MIUI ROM.
alex.79 said:
Download the stock firmware and put dload folder in SD card. After that switch OFF the phone. Push at same time power and two volume buttons, phone will reboot in stock recovery and flash of stock ROM will start automatically.
After that you can try again to flash MIUI ROM.
Click to expand...
Click to collapse
Is it works even its stock recovery does not work. I mean, i am restarting phone by holding volume up and volume down buttons at the same time but Huawei original recovery mode not working. And would you please give me link of that stock rom.
bariskoca said:
Is it works even its stock recovery does not work. I mean, i am restarting phone by holding volume up and volume down buttons at the same time but Huawei original recovery mode not working. And would you please give me link of that stock rom.
Click to expand...
Click to collapse
I had the same problem after unsuccessfully installing MIUI. Huawei recovery didn't start, it just kept showing MIUI boot logo, and the updater launched but didn't do anything. I managed to get it working by formatting my SD and putting stock rom on it. Then the updater launched, recognised the update.app and the rest went smoothly.
Here you can download stock HUAWEI ROM: http://www.huaweiblog.de/downloads/ascend-p6-downloads/
Recovery which you use to flash MIUI is a temporally. It not affect your stock recovery. On my phone this method work perfect. Push all buttons in same time until stock recovery it start.
kaspars_l said:
I had the same problem after unsuccessfully installing MIUI. Huawei recovery didn't start, it just kept showing MIUI boot logo, and the updater launched but didn't do anything. I managed to get it working by formatting my SD and putting stock rom on it. Then the updater launched, recognised the update.app and the rest went smoothly.
Click to expand...
Click to collapse
Would you please give me link of that update.app file?
alex.79 said:
Here you can download stock HUAWEI ROM: http://www.huaweiblog.de/downloads/ascend-p6-downloads/
Recovery which you use to flash MIUI is a temporally. It not affect your stock recovery. On my phone this method work perfect. Push all buttons in same time until stock recovery it start.
Click to expand...
Click to collapse
Doesnt start huawei recovery. There is only boot logo "HUAWEI Ascend"
bariskoca said:
Would you please give me link of that update.app file?
Click to expand...
Click to collapse
Unzip this and put the dload folder on your SD
http://dl.huaweinews.com/Roms/Ascend-P6/B118.zip
kaspars_l said:
Unzip this and put the dload folder on your SD
http://dl.huaweinews.com/Roms/Ascend-P6/B118.zip
Click to expand...
Click to collapse
I will try it. Thak you very much all.
bariskoca said:
Doesnt start huawei recovery. There is only boot logo "HUAWEI Ascend"
Click to expand...
Click to collapse
Recovery will start a few seconds after HUAWEI logo. But first turn off the phone and after that push and hold all button while recovery start.
kaspars_l said:
Unzip this and put the dload folder on your SD
http://dl.huaweinews.com/Roms/Ascend-P6/B118.zip
Click to expand...
Click to collapse
Unzipped files to sdcard. Restarted phone by holding power button and volume up + volume down buttons. Nothing happend. Still stacked at Boot Logo. Even i cant switch off phone. when i hold power button its only restarting.
Damn, then I have no idea what to do. Lets hope you haven't bricked it and someone can come up with a solution.
kaspars_l said:
Damn, then I have no idea what to do. Lets hope you haven't bricked it and someone can come up with a solution.
Click to expand...
Click to collapse
Oh now something happend. I connected the phone to charge. Then i tryed to recover. First time came up lines from up to down. Tryed again. Now writing on screen but doing nothing;
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is LOCK state.
Then restarted phone by holding power button. HUAWEI recovery worked. But it didnt update phone. I choosed apply update from extenal storage, entered dload directory. But i couldnt see update.app file. Returned back entered again to update from external storage even didnt show dload directory. What should i do now.
Download ROM, unzip and you see dload folder with UPDATE.APP inside. Put dload folder in main directory on SD card via PC. Put the card on the phone. Push all buttons (power, volume up, volume down) at same time while phone is reboot on stock recovery. After that HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0 will find UPDATE.APP in dload folder automatically and flash process will start.
bariskoca said:
Oh now something happend. I connected the phone to charge. Then i tryed to recover. First time came up lines from up to down. Tryed again. Now writing on screen but doing nothing;
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is LOCK state.
Then restarted phone by holding power button. HUAWEI recovery worked. But it didnt update phone. I choosed apply update from extenal storage, entered dload directory. But i couldnt see update.app file. Returned back entered again to update from external storage even didnt show dload directory. What should i do now.
Click to expand...
Click to collapse
Oh, this is where I was stuck for a while. This is where I formatted my SD and copy the dload folder to SD. Then the update happened.
Yes now it worked thanks all of you and xda.
Sent from my HUAWEI P6-U06 using xda app-developers app

[Q] Cannot revert to original ROM from MIUI

Hi. i'm trying to revert from MIUI to the stock ROM, but it is not working, it says E: signature failed
I'm using the the touch recovery... I have tried with three different official ROMs(B111, 112 and 118) but none is workin.
Plese, help me because I really need the stock ROM (I need Whatsapp). Thank you very much!
I don't think you can flash stock ROM with CWM. Use update through Settings -> About phone -> System update.
Make sure UPDATE.APP is in dload folder in your SD card.
Sent from my P6-U06 using Tapatalk
You should use stock Recovery instead of TWRP to install stock rom. Place the "dload" folder from the official zip file to your SD card. Turn off your phone, and boot holding all 3 buttons (power, volume + and volume -). Once the phone boots, release power button and continue holding volume + and - buttons. The phone should boot into stock recovery and install the stock ROM automatically.

[Q] Please Help :(

Hi!
So there is my problem:
I upgraded to KitKat and tryed to install gapps but then everything f* up. So with TWRP I tried to install B125 but it didn't work so I put this B111 on my phone than I tried to install it but it failed and TWRP says that there isn't OS on my phone
Also I don't have any sd card..
What can i do?
maticex said:
Hi!
So there is my problem:
I upgraded to KitKat and tryed to install gapps but then everything f* up. So with TWRP I tried to install B125 but it didn't work so I put this B111 on my phone than I tried to install it but it failed and TWRP says that there isn't OS on my phone
Also I don't have any sd card..
What can i do?
Click to expand...
Click to collapse
Go get an SD CARD from someone and put on it B125 International Version or any other ROM for that matter, and do it fast until your phone runs out of battery. Put update.app in dload folder. You can do it through adb and fastboot, but the safest way is the way that I have just told you. And after that press the Power button and volume up/down at once, all of them until stock recovery starts updating/upgrading... well installing the new ROM, I hope you still have stock recovery.
So when I put it in dload and put it in phone what next?
maticex said:
So when I put it in dload and put it in phone what next?
Click to expand...
Click to collapse
Press the Power button and volume up/down at once, all of them until stock recovery starts. If you only have TWRP find a flashable ROM that is a ZIP, and flash it through TWRP.
ZuperStyler said:
Press the Power button and volume up/down at once, all of them until stock recovery starts. If you only have TWRP find a flashable ROM that is a ZIP, and flash it through TWRP.
Click to expand...
Click to collapse
I have b111.zip in my internal storage if it helps?
maticex said:
I have b111.zip in my internal storage if it helps?
Click to expand...
Click to collapse
You must move it to an SD CARD, get one from someone just to restore your phone.
ZuperStyler said:
You must move it to an SD CARD, get one from someone just to restore your phone.
Click to expand...
Click to collapse
Do you know any B125 firmware which is in zip? not APP. file
maticex said:
Do you know any B125 firmware which is in zip? not APP. file
Click to expand...
Click to collapse
i advise you to flash this ROM, try it. http://forum.xda-developers.com/showthread.php?t=2585783 Must work since you had KitKat, your bootloader must be unlocked. Try CyanogenMod 10.1 following the instructions. But again, use an SD CARD.
ZuperStyler said:
i advise you to flash this ROM, try it. http://forum.xda-developers.com/showthread.php?t=2585783 Must work since you had KitKat, your bootloader must be unlocked. Try CyanogenMod 10.1 following the instructions. But again, use an SD CARD.
Click to expand...
Click to collapse
I'll try probably
maticex said:
I'll try probably
Click to expand...
Click to collapse
Try ? LOL Any ROM is good to put your phone into a workable state. After that, install whatever ROM you like.
I understood that this ROM can be instaled only via CN 118?
maticex said:
I understood that this ROM can be instaled only via CN 118?
Click to expand...
Click to collapse
I had B125 International Locked and then I flashed KitKat, and after that CyanogenMod 10.1 and worked. Now, fell free to try what you want, but if you want to be safe install stock recovery if you don't have it anymore and upgrade from dload folder B125. All the info you want you can find on XDA. Just search what you need.
ZuperStyler said:
I had B125 International Locked and then I flashed KitKat, and after that CyanogenMod 10.1 and worked. Now, fell free to try what you want, but if you want to be safe install stock recovery if you don't have it anymore and upgrade from dload folder B125. All the info you want you can find on XDA. Just search what you need.
Click to expand...
Click to collapse
Do you maybe have original stock recovery file and do I just flash it with TWRP?
maticex said:
Do you maybe have original stock recovery file and do I just flash it with TWRP?
Click to expand...
Click to collapse
But you don't have an OS.
Put your device in fastboot mode ( > adb reboot bootloader )
Extract recovery.img from archive
fastboot flash recovery recovery.img ;
fastboot reboot ;
Tell me what stock recovery do you want.
Place the ZIP with the recovery let's say on Local Disk ( C: ) Create a folder and name it fastboot. Put the recovery ZIP in that folder. After that connect your phone to the PC, now press shift and right click on your mouse or on your laptop and press Open Command Window here. There you write adb bootloader and press enter.
fastboot flash recovery recovery.img ;
fastboot reboot ;
defo just get like a 4gb sd card.
Thank you for all I'm on cm now, but I don't like that I can't take photos with it Can I get camera working?
How can I install normal huawei software now?
Revert to stock recovery first.
How can I do this, I don't find threads with how can i do this?
Can I get Camera working there it says that it is working but on my phone gallery chrashes when I open camera app
Use Camera360, works perfectly.
maticex said:
Hi!
So there is my problem:
I upgraded to KitKat and tryed to install gapps but then everything f* up. So with TWRP I tried to install B125 but it didn't work so I put this B111 on my phone than I tried to install it but it failed and TWRP says that there isn't OS on my phone
Also I don't have any sd card..
What can i do?
Click to expand...
Click to collapse
i done someting similar after trying to put b125 back to phone.. well he was stuck at start with huawei logo..anyway i don`t put on my sd card any zip.. i put on main sdcard the folder "dload" and inside that folder was update.app." file
soo... {my phone was freezeing with huawei logo not opening up anymore so i put that folder on sdcard useing diferent phone then i connect phone to usb and hold power putton this way that logo with huaway disear and phone restarted.in that moment i take off finger from power button .and then holding the volume plus minus and again power button . anyway not sure if was needed to conect phone at usb to restart it but for me works }
i done nothing more.. nothing on computer.. the instalation of b125 works normaly directly from that recovery menu

Bricked ascend p6

So this morning I wanned to update my Jelly Bean to kitkat . I have my ascend p6 only 2months , earlyier i had galaxy young ,and i installed many roms on him, so i wanned to instal kitkat on this phone, so i installed cwm and started in recovery mode, after that i tried to instal, Look for the attachment
when i tried to chose zip from sd card nothing showed up it just like crashed or smth , after that i tried to restart and start again in recovery , in this time i chose zip from/storage/sd card , in this time it showed up and i tried to instal rom, after that i tried to instal gaps and superuser, both of them failed, then i restarted my phone and it stuck on Huawei ascend logo, its has been for some hours im trying to fix this, i've looked all over internet, i tried to take out sd card and put B125.zip file and instal it, i read it on net that it can help, after that i putted back my sd card in phone and after that i tried to go into recovery mode , put the phone doesnt reads the SD CARD !!!!!!!!!!!!!!!!! help please !!!!
Extract the zip, put the update.app in the dload folder on the SD card, then force update with volume up, volume down and power button. Hold those until it starts updating. Always do a bit of research before just flashing!!
Sent from my P6-U06 using Tapatalk
Don't forget to flash a stock recovery from fastboot mode first.
uhm please tell me the instructions , i don't understand all of what ur saying
lootjelo said:
Extract the zip, put the update.app in the dload folder on the SD card, then force update with volume up, volume down and power button. Hold those until it starts updating. Always do a bit of research before just flashing!!
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
Hey buddy, i tried it , but when the update start , it looks like this:
USB UPDATE ENTER...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
this phone is secureboot phone.
this phone is LOCK state. .............. And after that nothing it just like freezes, even that loading tab is frozen, idk i need to wait or i need to do something else?
GrizzLV said:
Hey buddy, i tried it , but when the update start , it looks like this:
USB UPDATE ENTER...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
this phone is secureboot phone.
this phone is LOCK state. .............. And after that nothing it just like freezes, even that loading tab is frozen, idk i need to wait or i need to do something else?
Click to expand...
Click to collapse
So it dosnt find your sdcard/ or update file.. It needs to be in FAT32, NTFS dosnt work..
And remember make dload folder where to add update.app file

[Problem] Bootloop "Your Device is corrupt." Can't access recovery.

Hello,
Woke up to my phone turned off and upon turning it on showing the Your Device is corrupt error and after 30 seconds a reboot happens automatically. I remember I had a "low disk space" alert for a few days. I think there is absolutely no free disc space. I can't access recovery as when I hold down any buttons it turns on and quickly shuts down within 1 second upon the first screen showing.
Don't know what to do. I had many important files on it as well.
Any tips would be massively appreciated.
Why are we facing this issue?
+1
Any solution for this?
My device is also facing the same issue.
Mangekyō_1 said:
Hello,
Woke up to my phone turned off and upon turning it on showing the Your Device is corrupt error and after 30 seconds a reboot happens automatically. I remember I had a "low disk space" alert for a few days. I think there is absolutely no free disc space. I can't access recovery as when I hold down any buttons it turns on and quickly shuts down within 1 second upon the first screen showing.
Don't know what to do. I had many important files on it as well.
Any tips would be massively appreciated.
Click to expand...
Click to collapse
Factory reset is the only option!!
connect your phone to pc in normal charging mode and then try booting to recovery mode (power&vol+), you should be able to boot to recovery.
you will loose all your data.
Sadly this is clearly not working. There is quite a few posts on the nokia forum relating to this and the android 10 update bricking the device. But so far there is no solution and as well as that, the recovery mode is not available.
There appears to be some opportunists on youtube that are exploiting this to profit to fix the device, but that is no real help.
So I'm also in the club of a bricked Nokia (well its my mothers phone) that has remained stock the entire time. (it's a good thing I kept my Nexus 4!)
Fryingsheep said:
Sadly this is clearly not working. There is quite a few posts on the nokia forum relating to this and the android 10 update bricking the device. But so far there is no solution and as well as that, the recovery mode is not available.
There appears to be some opportunists on youtube that are exploiting this to profit to fix the device, but that is no real help.
So I'm also in the club of a bricked Nokia (well its my mothers phone) that has remained stock the entire time. (it's a good thing I kept my Nexus 4!)
Click to expand...
Click to collapse
Try booting in fastboot .
Poweroff your phone .
Connect to pc .
Press (vol- & power) until the logo appears with a little fastboot written in left bottom.
If you are able to boot into fastboot then tell me I will give you the solution.
bx2_nero said:
Try booting in fastboot .
Poweroff your phone .
Connect to pc .
Press (vol- & power) until the logo appears with a little fastboot written in left bottom.
If you are able to boot into fastboot then tell me I will give you the solution.
Click to expand...
Click to collapse
Yeah, it's refusing to go into fastboot, just keeps going in a cycle back to the corrupt error again
Fryingsheep said:
Yeah, it's refusing to go into fastboot, just keeps going in a cycle back to the corrupt error again
Click to expand...
Click to collapse
Did you connected to pc before trying to boot into fastboot.
bx2_nero said:
Did you connected to pc before trying to boot into fastboot.
Click to expand...
Click to collapse
Yeah, thats when it goes into cycle even more so, android one screen comes up, quick flash of the corrupt error, then it starts again.
Fryingsheep said:
Yeah, thats when it goes into cycle even more so, android one screen comes up, quick flash of the corrupt error, then it starts again.
Click to expand...
Click to collapse
Join this and report your problem.
t.me/HikariCalyxFIH
Sadly it is lifeless now, believe the battery has ran out and the phone refuses to charge in this state
solution
Hello i had the same problem , i recovered my 5.1 plus this worked for me maybe it works for you too.
First download sp flash tool and firmware file i have 5.1 plus world wide version and dowload the image PDA-209B-0-00WW-B06 for x5 use the image with cn not ww.
Unzip flash tool and the image PDA-209B-0-00WW-B06.
Run sp flash tool load the scatter file from the image, then unthick the box sutinfo, systeminfo_a & cda_a and hit dowload, conect youre phone holding volume up and down until it starts download.
Wait until it finish and the green box wit ok appears. Now the phone will start and after android one logo,the robot image and no comand will show up, click power button then quick on volume up and recovery menu shows.
Now you need a micro sd card and OTA update file download the Android 10 Update (V3.11A) : ace851ea59294177f677018648d6c0614317510e.zip.
Copy the zip file on the micro sd then insert it on the phone. From the recovery menu choose update from sd card then select : ace851ea59294177f677018648d6c0614317510e.zip
The update will start wait untill recovery says succesful it will take some time be patient. After that reboot all done youre device should work. Its my first post i cant post links sorry the sistem wont let me.
piticulrau said:
Hello i had the same problem , i recovered my 5.1 plus this worked for me maybe it works for you too.
First download sp flash tool and firmware file i have 5.1 plus world wide version and dowload the image PDA-209B-0-00WW-B06 for x5 use the image with cn not ww.
Unzip flash tool and the image PDA-209B-0-00WW-B06.
Run sp flash tool load the scatter file from the image, then unthick the box sutinfo, systeminfo_a & cda_a and hit dowload, conect youre phone holding volume up and down until it starts download.
Wait until it finish and the green box wit ok appears. Now the phone will start and after android one logo,the robot image and no comand will show up, click power button then quick on volume up and recovery menu shows.
Now you need a micro sd card and OTA update file download the Android 10 Update (V3.11A) : ace851ea59294177f677018648d6c0614317510e.zip.
Copy the zip file on the micro sd then insert it on the phone. From the recovery menu choose update from sd card then select : ace851ea59294177f677018648d6c0614317510e.zip
The update will start wait untill recovery says succesful it will take some time be patient. After that reboot all done youre device should work. Its my first post i cant post links sorry the sistem wont let me.
Click to expand...
Click to collapse
You left the most important step .
Readback step in SP FlashTool.
Hey folks!
Let me share what worked for me when I solved this issue on a friend's phone.
This guide is dependent on you being able to boot into recovery mode - the screen with the green android robot laying down with a red exclamation mark on top of it.
We'll use recovery mode to sideload an OTA image to the device. Go to the Nokia OTA repository on telegram (search for Nokia OTA repository). Once there search for Nokia 5.1 plus and from the search results look for a full Android 10 OTA image with the April security patch (sorry, can't post links - should be 1.23 GB). Download that file and move it to the root directory on your SD card and then insert your SD card into your device.
Now, boot into recovery mode on your device (there's a key combination that will get you there but I'm not exactly sure what it is - try Power + Volume Up or Power + Volume Down). Once you get to the recovery mode screen, press Power and Volume Up to load the recovery menu. You'll see a bunch of options listed there - the one we're keen on is 'Install zip from SD Card'. Scroll down using the Volume Down button until you get to that option and then press the Power button to select it. You should then be able to select the zip file you downloaded earlier from your SD card. The process should then take a few minutes to complete. If all goes well, you can now reboot your device and Profit!
Good luck!
bx2_nero said:
You left the most important step .
Readback step in SP FlashTool.
Click to expand...
Click to collapse
No i did not use readback , why shoud i? I have lost half a day searching on internet about this problem and i got lucky.
piticulrau said:
No i did not use readback , why shoud i? I have lost half a day searching on internet about this problem and i got lucky.
Click to expand...
Click to collapse
Readback is the most important step when you are flashing stock rom .. it backups all the partitions in a single file which you can use to restore if something goes wrong .. many users have faced issues because they didn't do the readback process . You can check out the guide for downgrade and there is nothing to search about .. if you can access recovery/fastboot then it's very easy to restore . If you can't you will have to flash the stock rom . You can check the guide in Guides thread. You just got lucky .if something went wrong you would have end up bricked up your device bad.
bx2_nero said:
Readback is the most important step when you are flashing stock rom .. it backups all the partitions in a single file which you can use to restore if something goes wrong .. many users have faced issues because they didn't do the readback process . You can check out the guide for downgrade and there is nothing to search about .. if you can access recovery/fastboot then it's very easy to restore . If you can't you will have to flash the stock rom . You can check the guide in Guides thread. You just got lucky .if something went wrong you would have end up bricked up your device bad.
Click to expand...
Click to collapse
Ok , did not know that, ill remember next time if i have same problem. Thank you. Indeed i had no way to enter recovery menu and when trying to flash i got errors the only way i could suucesfuly flash the rom was unticking those 3 boxes , after that the phone entered in recovery but it wasnt able to start normaly it bootloped to the robot with no comand ,so i had to use update from sd because sideload didnt work.
piticulrau said:
Ok , did not know that, ill remember next time if i have same problem. Thank you. Indeed i had no way to enter recovery menu and when trying to flash i got errors the only way i could suucesfuly flash the rom was unticking those 3 boxes , after that the phone entered in recovery but it wasnt able to start normaly it bootloped to the robot with no comand ,so i had to use update from sd because sideload didnt work.
Click to expand...
Click to collapse
Its very lucky that you got it work ... Sometimes this device can be very messy.
---------- Post added at 03:57 AM ---------- Previous post was at 03:56 AM ----------
battystutor said:
Hey folks!
Let me share what worked for me when I solved this issue on a friend's phone.
This guide is dependent on you being able to boot into recovery mode - the screen with the green android robot laying down with a red exclamation mark on top of it.
We'll use recovery mode to sideload an OTA image to the device. Go to the Nokia OTA repository on telegram (search for Nokia OTA repository). Once there search for Nokia 5.1 plus and from the search results look for a full Android 10 OTA image with the April security patch (sorry, can't post links - should be 1.23 GB). Download that file and move it to the root directory on your SD card and then insert your SD card into your device.
Now, boot into recovery mode on your device (there's a key combination that will get you there but I'm not exactly sure what it is - try Power + Volume Up or Power + Volume Down). Once you get to the recovery mode screen, press Power and Volume Up to load the recovery menu. You'll see a bunch of options listed there - the one we're keen on is 'Install zip from SD Card'. Scroll down using the Volume Down button until you get to that option and then press the Power button to select it. You should then be able to select the zip file you downloaded earlier from your SD card. The process should then take a few minutes to complete. If all goes well, you can now reboot your device and Profit!
Good luck!
Click to expand...
Click to collapse
Power + VolUp - Recovery
Power + VolDown - Fastboot

Categories

Resources