The news had Ry09iu (author of MIUI for P6) on that now is FULLY unlocked bootloader is true and now we have the first custom recovery FULL!
Is CWM 6.0.4.5 and for now is only in Chinese.
ONLY works with the ROM B118 China, because so far is the only totally free bootloader.
The news and download:
http://cn.club.vmall.com/forum.php?mod=viewthread&tid=242957&extra=page%3D1
For P6-U06 version is:
http://pan.baidu.com/s/1AFqeq Password: pwsx
I tried it and the interesting thing is that we can install the custom recovery or reinstall the original recovery that came with the phone.
Best Regards
Hi!
As I can see it's a signed custom recovery ( cn ) !
I alraedy maked a TWRP recovery, but device will not boot in recovery because is not signed !
Can you give us some details about the signing ?
Thanks !
surdu_petru said:
Hi!
As I can see it's a signed custom recovery ( cn ) !
I alraedy maked a TWRP recovery, but device will not boot in recovery because is not signed !
Can you give us some details about the signing ?
Thanks !
Click to expand...
Click to collapse
Update Official B118 firmware, then flash your recovery, becaust this version unverify for boot or recovery
Ry09iu said:
Update Official B118 firmware, then flash your recovery, becaust this version unverify for boot or recovery
Click to expand...
Click to collapse
Ok, but I was already on firmware B118 !
If your recovery is not signed , than I think I know why my device not boot !
Thank you very much
SOLVED ! also my TWRP recovery can be flashed on /recovery partition !
honor 3 compatility?
Someone know if this recovery work on honor 3?
thanks
Related
First. I have installed CWM but is just backing up files, not restoring them. So I installed TWRP_R01.
My first question :
1. It's safe to remove CWM and stick only with TWRP, and how to do it?
And second question :
2. It;s safe to install TWRP_R02 over TWRP_R01, and what it the difference between the two of them, and how to do it?
HUAWEIAscendP6 said:
First. I have installed CWM but is just backing up files, not restoring them. So I installed TWRP_R01.
My first question :
1. It's safe to remove CWM and stick only with TWRP, and how to do it?
And second question :
2. It;s safe to install TWRP_R02 over TWRP_R01, and what it the difference between the two of them, and how to do it?
Click to expand...
Click to collapse
Yes TWRP Is Completely Safe. TWRP_R01 Is Not Permanent Recovery Its Not Affect Your Recovery Partition. TWRP_02 Is Permanent Recovery It Will Installed iN Recovery Partition and Remove Your Stock Recovery. If You Want To Install Offical Firmware You Have To Install Stock Recovery Again.
Thank you. So it's ok to use for now the non permanent version? What does exactly permanent recovery mean, and what's wrong with the non permanent version.
And how to remove CWM please, if you know.
HUAWEIAscendP6 said:
Thank you. So it's ok to use for now the non permanent version? What does exactly permanent recovery mean, and what's wrong with the non permanent version.
And how to remove CWM please, if you know.
Click to expand...
Click to collapse
I Think Surdu_Petru Will Not Update Non Permanent Recovery Anymore. I Suggest You Install permanent Recovery.
Instruction Are In Thread.
http://forum.xda-developers.com/showthread.php?t=2534420
Thanks, but how to put the phone in fastboot? Is there a tool that can do that?
And how to use those commands via adb shell or cmd.
Maybe a more extended tutorial on how to do it would be necessary.
EDIT :
And I think that when I installed TRWP that wiped out CWM. I'm not sure but I cannot enter CWM no more, that's ok, because I wanted TWRP, but maybe @surdu_petru should clarify this : if installing that version of TWRP, that's _R01, will automatically wipe CWM from the phone.
HUAWEIAscendP6 said:
Thanks, but how to put the phone in fastboot? Is there a tool that can do that?
And how to use those commands via adb shell or cmd.
Maybe a more extended tutorial on how to do it would be necessary.
EDIT :
And I think that when I installed TRWP that wiped out CWM. I'm not sure but I cannot enter CWM no more, that's ok, because I wanted TWRP, but maybe @surdu_petru should clarify this : if installing that version of TWRP, that's _R01, will automatically wipe CWM from the phone.
Click to expand...
Click to collapse
Hello !
As I can see, ( not only you ) almost all members do not read the whole OP , and also second OP with attention !
If you had the patience to read everything, ( however it is for your own good ) you'll realize that I have clarified everything about twrp recovery !
As long as TWRP R02 is not specified that it is a permanent recovery, we can deduce logically that R02 is an update to R01 !
Good luck !
@surdu_petru Ok, thanks. I will use SDK Tool to install adb and fastboot. How to put the device in fastboot by the way, there is some buttons combination command?
But what's new in _V02? Must be some upgraded stuff right?
And why update, if with _V02 I must revert to stock recovery if I want to flash another ROM.
HUAWEIAscendP6 said:
@surdu_petru Ok, thanks. I will use SDK Tool to install adb and fastboot. How to put the device in fastboot by the way, there is some buttons combination command?
But what's new in _V02? Must be some upgraded stuff right?
And why update, if with _V02 I must revert to stock recovery if I want to flash another ROM.
Click to expand...
Click to collapse
As mentioned before, you have everything you need there, just have to read and understand !
But, I have a question , why you want to install something in your device if you don't want to read also Installation section ?
Please read carefully the first and second post from TWRP Recovery, and if you doubt, I will answer you with the greatest pleasure !
TWRP V02 fixed Internal storage , but not definitive ( problems persist both here and in V03 ! )
As I see, you want to install V02 ? If your answer is Yes, why you need to put your device in fastboot mode ?
@surdu_petru Well, I want a recovery that works , just in case. Can I update your TWRP _V02 the easy way? I mean can I update from my _V01 recovery, install zip from external sdcard? I'm on the latest firmware. So it must work right? I have BlueAndroid V02
I'm ready to install even the _V03, I just need the simple instructions.
In your post you say something about CMD and adb commands.
@surdu_petru I have installed v2 but v3 faild.
HUAWEIAscendP6
HUAWEIAscendP6 said:
@surdu_petru I have installed v2 but v3 faild.
HUAWEIAscendP6
Click to expand...
Click to collapse
Please, what firmware you use currently ? As you can see R03 is ONLY for firmware B118 CN version !
surdu_petru said:
Please, what firmware you use currently ? As you can see R03 is ONLY for firmware B118 CN version !
Click to expand...
Click to collapse
@surdu_petru The Latest. There is a permanent TWRP for this firmware?
HUAWEIAscendP6
HUAWEIAscendP6 said:
@surdu_petru The Latest. There is a permanent TWRP for this firmware?
HUAWEIAscendP6
Click to expand...
Click to collapse
Nop, permanent recovery ( TWRP ) is ONLY for B118 CN version - for moment !
Not, tested , but someone say it work also permanent recovery on B125 if you updated B125 from B118 CN !
@surdu_petru It's a new phone.
HUAWEIAscendP6
HUAWEIAscendP6 said:
@surdu_petru I never did an update Just bought the phone,rooted and install TWRP. But it has the latest
Firmware version – B125 (International)
Android version – 4.2.2
Emotion UI version – 1.6
Kernel version -*3.0.8.795
HUAWEIAscendP6
Click to expand...
Click to collapse
HUAWEIAscendP6
Hello
when buying P6 original rom was b111 international
then I install KK beta
then TWRP 2.6.3.5
then several custom rom by LightningKat and HYD52ROM a currently LightningKat RC02.
Question:
How install back rom b111?
Which stock twrp recovery we can apply on TWRP 2.6.3.5 for instal JB rom with dload method? eg. b111 international
Thank you for response
mstaskovan said:
Hello
when buying P6 original rom was b111 international
then I install KK beta
then TWRP 2.6.3.5
then several custom rom by LightningKat and HYD52ROM a currently LightningKat RC02.
Question:
How install back rom b111?
Which stock twrp recovery we can apply on TWRP 2.6.3.5 for instal JB rom with dload method? eg. b111 international
Thank you for response
Click to expand...
Click to collapse
in first page u have answer.
http://forum.xda-developers.com/showthread.php?t=2534420
richish said:
in first page u have answer.
http://forum.xda-developers.com/showthread.php?t=2534420
Click to expand...
Click to collapse
Hello
this thread I read but I do not know whether it is possible install twrp stock recovery 2.6.3.0 on twrp 2.6.3.5 from this thread http://forum.xda-developers.com/showthread.php?t=2632542
mstaskovan said:
Hello
this thread I read but I do not know whether it is possible install twrp stock recovery 2.6.3.0 on twrp 2.6.3.5 from this thread http://forum.xda-developers.com/showthread.php?t=2632542
Click to expand...
Click to collapse
oh i thinked that u are looking for stock P6 recovery !
yes u are able to flash TWRP 2.6.3.0 over TWRP 2.6.3.5
richish said:
oh i thinked that u are looking for stock P6 recovery !
yes u are able to flash TWRP 2.6.3.0 over TWRP 2.6.3.5
Click to expand...
Click to collapse
sorry i am layman and my english is very bad
I am installed twrp 2.6.3.5 and I am looking STOCK P6 recovery
richish said:
in first page u have answer.
http://forum.xda-developers.com/showthread.php?t=2534420
Click to expand...
Click to collapse
I actually have the same question. Cannot B118 recovery brick your phone?
Can you any one help me?
On my P6 i have instaled TWRP 2.3.6.5 and custom rom from this thread http://forum.xda-developers.com/showthread.php?t=2631444 in version 2.1
1. I want install stock twrp from this thread http://forum.xda-developers.com/showpost.php?p=49978337&postcount=249 it is a right source? it is possible install this stock twrp on version 2.3.6.5
2. Then i want install KK beta how can i do it? it is posible via dload method (local update) or how?
3. Then i want install back B125 international rom how can i do it? it is posible via dload method when KK beta will be installed. or how
Thanks
Looks like your goal is to go back to B125?
Just flash recovery only from the link you posted:
http://www.androidfilehost.com/?fid=23329332407568599
You don't need to flash KK beta, flash B125 immediately.
Place UPDATE.APP from B125 in dload folder on your external SD card. Turn off the phone.
Turn it back on while holding volume down+volume up+power. Hold for at least 3 seconds. Update should start by itself.
Hope it works for you.
mstaskovan said:
Can you any one help me?
On my P6 i have instaled TWRP 2.3.6.5 and custom rom from this thread http://forum.xda-developers.com/showthread.php?t=2631444 in version 2.1
1. I want install stock twrp from this thread http://forum.xda-developers.com/showpost.php?p=49978337&postcount=249 it is a right source? it is possible install this stock twrp on version 2.3.6.5
2. Then i want install KK beta how can i do it? it is posible via dload method (local update) or how?
3. Then i want install back B125 international rom how can i do it? it is posible via dload method when KK beta will be installed. or how
Thanks
Click to expand...
Click to collapse
thanks
iwtfmcl said:
Looks like your goal is to go back to B125?
Just flash recovery only from the link you posted:
http://www.androidfilehost.com/?fid=23329332407568599
You don't need to flash KK beta, flash B125 immediately.
Place UPDATE.APP from B125 in dload folder on your external SD card. Turn off the phone.
Turn it back on while holding volume down+volume up+power. Hold for at least 3 seconds. Update should start by itself.
Hope it works for you.
Click to expand...
Click to collapse
Thanks
Now I need a phone
Try and write whether it succeeded
Thank you very much
it is work.
Can you say me if i want install again twrp 2.6.3.7 it is necessary install first KK beta for unlock bootloader or bootloader is still unlocked and i can install twrp 2.6.3.7 directly on b125?
If is it still unlocked, it is also possible install twrp 2.6.3.3 for testing any JB custom rom?
Thanks
iwtfmcl said:
Looks like your goal is to go back to B125?
Just flash recovery only from the link you posted:
http://www.androidfilehost.com/?fid=23329332407568599
You don't need to flash KK beta, flash B125 immediately.
Place UPDATE.APP from B125 in dload folder on your external SD card. Turn off the phone.
Turn it back on while holding volume down+volume up+power. Hold for at least 3 seconds. Update should start by itself.
Hope it works for you.
Click to expand...
Click to collapse
mstaskovan said:
Thank you very much
it is work.
Can you say me if i want install again twrp 2.6.3.7 it is necessary install first KK beta for unlock bootloader or bootloader is still unlocked and i can install twrp 2.6.3.7 directly on b125?
If is it still unlocked, it is also possible install twrp 2.6.3.3 for testing any JB custom rom?
Thanks
Click to expand...
Click to collapse
As I understand surdu_petru stated that you can flash TWRP 2.6.3.7 only on KK Beta, and 2.6.3.3 only on B118 unlocked firmware.
For flashing any custom ROM you have to read what ROM developer says. If developer of the custom ROM says "you can only flash it on B118", then you must be on B118. I would not try to flash it on B125 unless I was brave/dumb!
want to go back to JellyBean B125 from Kitkat beta
installed kitkatbeta > rooted > installed twrp > installed gapps > now device is too laggy & slow..
want to go back to stock jellybean B125 firmware
huzaif_a said:
installed kitkatbeta > rooted > installed twrp > installed gapps > now device is too laggy & slow..
want to go back to stock jellybean B125 firmware
Click to expand...
Click to collapse
I'd advice you to flash HYD52ROM KK. Great performance
Sent from my P6-U06 using XDA Premium 4 mobile app
huzaif_a said:
installed kitkatbeta > rooted > installed twrp > installed gapps > now device is too laggy & slow..
want to go back to stock jellybean B125 firmware
Click to expand...
Click to collapse
First, please install stock recovery KitKat, than you are able to flash any firmware you want by : external sdcard/dload/UPDATE.APP method !
Good luck !
unable to go stock recovery
kindly give some elaborated tutorial link as how to go back to stock recover & stock rom
Hi!
My p6 has now official international B510. I would like to install twrp and then custom rom, but I don't know where to start. I guess I should install kitkat beta? If so where I can download it and can I just install it via local update?
Thanks!
90mrsandman said:
Hi!
My p6 has now official international B510. I would like to install twrp and then custom rom, but I don't know where to start. I guess I should install kitkat beta? If so where I can download it and can I just install it via local update?
Thanks!
Click to expand...
Click to collapse
Hello !
If you want to install TWRP Recovery first, make sure your bootloader is unlocked !
Also you need to have some basic knowledge on how to use "adb", "fastboot" and how to set proper driver in your PC to recognized your device even in bootloader mode ! ( If you think these things are still unknown to you, than Google is your friend in order to bring this knowledge )
After, you can start with those threads : Club Huawei, How-TO - Flash Kernel, TWRP and Stock Recovery, General Bootloader Unlock for ALL Huawei Phones!, TWRP 2.7.1.0 .
Good luck :good:
Thanks a lot!
I've unlocked bootloader of my chinese redmi note 5 pro and flashed a global rom on it then updated to global v9.6.3.0, after that I installed twrp thru adb and root with magisk. Now, will I be able to update this to a new global version thru ota?
No. You can not
kotobodj said:
No. You can not
Click to expand...
Click to collapse
Is there a workaround to do so?
You can comeback to recovery stock or download update file to storage , boot to twrp then flash update zip. After update , masgik will not work
kotobodj said:
You can comeback to recovery stock or download update file to storage , boot to twrp then flash update zip. After update , masgik will not work
Click to expand...
Click to collapse
So the official update zip will work on twrp? I thought it's not possible on a custom recovery. Anyway I'll try that, thanks.
Work fine. But if you flash full rom , not update pack, all data will be earse , mi recovery comeback.
Hello Everyone,
I am using realme X CN 8/128 gb varient.
( RMX1901_11_A.18_00000000. )
I have already unlocked bootloader.
Installed twrp recovery ( though after reboot it goes back to stock recovery )
My problem is-
1. I wants to use global rom in it. ( possible or not ???)
2. I f not possible how to flash cn stock rom on it.
Please Help Me
All the senior members and devolopers.
Thanks in advance.
after flash don't reboot
direct enter twrp
if twrp boot then flash custom rom
mutahharbashir said:
after flash don't reboot
direct enter twrp
if twrp boot then flash custom rom
Click to expand...
Click to collapse
Which Custom Tom You reffer???