First. I have installed CWM but is just backing up files, not restoring them. So I installed TWRP_R01.
My first question :
1. It's safe to remove CWM and stick only with TWRP, and how to do it?
And second question :
2. It;s safe to install TWRP_R02 over TWRP_R01, and what it the difference between the two of them, and how to do it?
HUAWEIAscendP6 said:
First. I have installed CWM but is just backing up files, not restoring them. So I installed TWRP_R01.
My first question :
1. It's safe to remove CWM and stick only with TWRP, and how to do it?
And second question :
2. It;s safe to install TWRP_R02 over TWRP_R01, and what it the difference between the two of them, and how to do it?
Click to expand...
Click to collapse
Yes TWRP Is Completely Safe. TWRP_R01 Is Not Permanent Recovery Its Not Affect Your Recovery Partition. TWRP_02 Is Permanent Recovery It Will Installed iN Recovery Partition and Remove Your Stock Recovery. If You Want To Install Offical Firmware You Have To Install Stock Recovery Again.
Thank you. So it's ok to use for now the non permanent version? What does exactly permanent recovery mean, and what's wrong with the non permanent version.
And how to remove CWM please, if you know.
HUAWEIAscendP6 said:
Thank you. So it's ok to use for now the non permanent version? What does exactly permanent recovery mean, and what's wrong with the non permanent version.
And how to remove CWM please, if you know.
Click to expand...
Click to collapse
I Think Surdu_Petru Will Not Update Non Permanent Recovery Anymore. I Suggest You Install permanent Recovery.
Instruction Are In Thread.
http://forum.xda-developers.com/showthread.php?t=2534420
Thanks, but how to put the phone in fastboot? Is there a tool that can do that?
And how to use those commands via adb shell or cmd.
Maybe a more extended tutorial on how to do it would be necessary.
EDIT :
And I think that when I installed TRWP that wiped out CWM. I'm not sure but I cannot enter CWM no more, that's ok, because I wanted TWRP, but maybe @surdu_petru should clarify this : if installing that version of TWRP, that's _R01, will automatically wipe CWM from the phone.
HUAWEIAscendP6 said:
Thanks, but how to put the phone in fastboot? Is there a tool that can do that?
And how to use those commands via adb shell or cmd.
Maybe a more extended tutorial on how to do it would be necessary.
EDIT :
And I think that when I installed TRWP that wiped out CWM. I'm not sure but I cannot enter CWM no more, that's ok, because I wanted TWRP, but maybe @surdu_petru should clarify this : if installing that version of TWRP, that's _R01, will automatically wipe CWM from the phone.
Click to expand...
Click to collapse
Hello !
As I can see, ( not only you ) almost all members do not read the whole OP , and also second OP with attention !
If you had the patience to read everything, ( however it is for your own good ) you'll realize that I have clarified everything about twrp recovery !
As long as TWRP R02 is not specified that it is a permanent recovery, we can deduce logically that R02 is an update to R01 !
Good luck !
@surdu_petru Ok, thanks. I will use SDK Tool to install adb and fastboot. How to put the device in fastboot by the way, there is some buttons combination command?
But what's new in _V02? Must be some upgraded stuff right?
And why update, if with _V02 I must revert to stock recovery if I want to flash another ROM.
HUAWEIAscendP6 said:
@surdu_petru Ok, thanks. I will use SDK Tool to install adb and fastboot. How to put the device in fastboot by the way, there is some buttons combination command?
But what's new in _V02? Must be some upgraded stuff right?
And why update, if with _V02 I must revert to stock recovery if I want to flash another ROM.
Click to expand...
Click to collapse
As mentioned before, you have everything you need there, just have to read and understand !
But, I have a question , why you want to install something in your device if you don't want to read also Installation section ?
Please read carefully the first and second post from TWRP Recovery, and if you doubt, I will answer you with the greatest pleasure !
TWRP V02 fixed Internal storage , but not definitive ( problems persist both here and in V03 ! )
As I see, you want to install V02 ? If your answer is Yes, why you need to put your device in fastboot mode ?
@surdu_petru Well, I want a recovery that works , just in case. Can I update your TWRP _V02 the easy way? I mean can I update from my _V01 recovery, install zip from external sdcard? I'm on the latest firmware. So it must work right? I have BlueAndroid V02
I'm ready to install even the _V03, I just need the simple instructions.
In your post you say something about CMD and adb commands.
@surdu_petru I have installed v2 but v3 faild.
HUAWEIAscendP6
HUAWEIAscendP6 said:
@surdu_petru I have installed v2 but v3 faild.
HUAWEIAscendP6
Click to expand...
Click to collapse
Please, what firmware you use currently ? As you can see R03 is ONLY for firmware B118 CN version !
surdu_petru said:
Please, what firmware you use currently ? As you can see R03 is ONLY for firmware B118 CN version !
Click to expand...
Click to collapse
@surdu_petru The Latest. There is a permanent TWRP for this firmware?
HUAWEIAscendP6
HUAWEIAscendP6 said:
@surdu_petru The Latest. There is a permanent TWRP for this firmware?
HUAWEIAscendP6
Click to expand...
Click to collapse
Nop, permanent recovery ( TWRP ) is ONLY for B118 CN version - for moment !
Not, tested , but someone say it work also permanent recovery on B125 if you updated B125 from B118 CN !
@surdu_petru It's a new phone.
HUAWEIAscendP6
HUAWEIAscendP6 said:
@surdu_petru I never did an update Just bought the phone,rooted and install TWRP. But it has the latest
Firmware version – B125 (International)
Android version – 4.2.2
Emotion UI version – 1.6
Kernel version -*3.0.8.795
HUAWEIAscendP6
Click to expand...
Click to collapse
HUAWEIAscendP6
Related
Hey guys!
I'd like to get rid of CWM. I should try TWRP. I flashed from B111 to B125. Should I try? I have international version... P6-U06
Fedds said:
Hey guys!
I'd like to get rid of CWM. I should try TWRP. I flashed from B111 to B125. Should I try? I have international version... P6-U06
Click to expand...
Click to collapse
Yes, I have 125 and installed TWRP V02 and works perfectly. Backup and Restore and many more options.
HUAWEIAscendP6 said:
Yes, I have 125 and installed TWRP V02 and works perfectly. Backup and Restore and many more options.
Click to expand...
Click to collapse
What version did you had before upgrading to B125? Also International or Chinese?
EDITED
Fedds said:
What version did you had before upgrading to B125? Also International or Chinese?
Click to expand...
Click to collapse
I bought the phone a week ago, brand new, case sealed from the store and it already had this version. 125 International
HUAWEIAscendP6 said:
I bought the phone a week ago, brand new, case sealed from the store and it already had this version. 125 International BlueAndroid V02
Click to expand...
Click to collapse
Wait, what? BlueAndroid is a custom ROM made by @surdu_petru!
Sent from my HUAWEI P6-U06 using Tapatalk
Ottomaani0 said:
Wait, what? BlueAndroid is a custom ROM made by @surdu_petru!
Sent from my HUAWEI P6-U06 using Tapatalk
Click to expand...
Click to collapse
No, Sorry, that was a copy paste for another post I mean that TWRP that I installed is from @surdu_petru
Although in my Settings : About Phone : Build Number shows BlueAndroid V02. I don't know why, maybe because I installed that TWRP, I don't know. Maybe @surdu_petru knows why.
HUAWEIAscendP6 said:
No, Sorry, that was a copy paste for another post
Click to expand...
Click to collapse
Haha, ok
Sent from my HUAWEI P6-U06 using Tapatalk
Ottomaani0 said:
Haha, ok
Sent from my HUAWEI P6-U06 using Tapatalk
Click to expand...
Click to collapse
But as I said, the only thing that I did after I bought the phone was to root it and install TWRP and after that in Settings : About phone : Build number appeared : BlueAndroid V02
So how do I flash TWRP R02?
Fedds said:
So how do I flash TWRP R02?
Click to expand...
Click to collapse
At first I installed CWM, but that's not good, the only good thing about CWM it was that I was able to flash TWRP zip from CWM, and ofcourse TWRP totally replaced CWM after. If you want I can tell you how you can install CWM and flash through CWM the TWRP file @Fedds here is the link with instructions : http://forum.xda-developers.com/showthread.php?t=2417919 After that you download TWRP V02 from here : http://forum.xda-developers.com/showthread.php?t=2534420
P.S. Do not install TWRP V03 because is not compatible, it is a permanent recovery but not compatible with 125 firmware. Anyway V02 works great.
I did flash through CWM a R01 version. Then I tried to flash to R02 through R01. But this time I got stock recovery and after trying to flash R02, the installation failed and the stock recovery won't recognize my sd card anymore.
Fedds said:
I did flash through CWM a R01 version. Then I tried to flash to R02 through R01. But this time I got stock recovery and after trying to flash R02, the installation failed and the stock recovery won't recognize my sd card anymore.
Click to expand...
Click to collapse
Enter TWRP and mount sdcard.
HUAWEIAscendP6 said:
At first I installed CWM, but that's not good, the only good thing about CWM it was that I was able to flash TWRP zip from CWM, and ofcourse TWRP totally replaced CWM after. If you want I can tell you how you can install CWM and flash through CWM the TWRP file @Fedds here is the link with instructions : http://forum.xda-developers.com/showthread.php?t=2417919 After that you download TWRP V02 from here : http://forum.xda-developers.com/showthread.php?t=2534420
P.S. Do not install TWRP V03 because is not compatible, it is a permanent recovery but not compatible with 125 firmware. Anyway V02 works great.
Click to expand...
Click to collapse
Please a link the TWRP V02 for download, i have a B125
Hello
when buying P6 original rom was b111 international
then I install KK beta
then TWRP 2.6.3.5
then several custom rom by LightningKat and HYD52ROM a currently LightningKat RC02.
Question:
How install back rom b111?
Which stock twrp recovery we can apply on TWRP 2.6.3.5 for instal JB rom with dload method? eg. b111 international
Thank you for response
mstaskovan said:
Hello
when buying P6 original rom was b111 international
then I install KK beta
then TWRP 2.6.3.5
then several custom rom by LightningKat and HYD52ROM a currently LightningKat RC02.
Question:
How install back rom b111?
Which stock twrp recovery we can apply on TWRP 2.6.3.5 for instal JB rom with dload method? eg. b111 international
Thank you for response
Click to expand...
Click to collapse
in first page u have answer.
http://forum.xda-developers.com/showthread.php?t=2534420
richish said:
in first page u have answer.
http://forum.xda-developers.com/showthread.php?t=2534420
Click to expand...
Click to collapse
Hello
this thread I read but I do not know whether it is possible install twrp stock recovery 2.6.3.0 on twrp 2.6.3.5 from this thread http://forum.xda-developers.com/showthread.php?t=2632542
mstaskovan said:
Hello
this thread I read but I do not know whether it is possible install twrp stock recovery 2.6.3.0 on twrp 2.6.3.5 from this thread http://forum.xda-developers.com/showthread.php?t=2632542
Click to expand...
Click to collapse
oh i thinked that u are looking for stock P6 recovery !
yes u are able to flash TWRP 2.6.3.0 over TWRP 2.6.3.5
richish said:
oh i thinked that u are looking for stock P6 recovery !
yes u are able to flash TWRP 2.6.3.0 over TWRP 2.6.3.5
Click to expand...
Click to collapse
sorry i am layman and my english is very bad
I am installed twrp 2.6.3.5 and I am looking STOCK P6 recovery
richish said:
in first page u have answer.
http://forum.xda-developers.com/showthread.php?t=2534420
Click to expand...
Click to collapse
I actually have the same question. Cannot B118 recovery brick your phone?
Can you any one help me?
On my P6 i have instaled TWRP 2.3.6.5 and custom rom from this thread http://forum.xda-developers.com/showthread.php?t=2631444 in version 2.1
1. I want install stock twrp from this thread http://forum.xda-developers.com/showpost.php?p=49978337&postcount=249 it is a right source? it is possible install this stock twrp on version 2.3.6.5
2. Then i want install KK beta how can i do it? it is posible via dload method (local update) or how?
3. Then i want install back B125 international rom how can i do it? it is posible via dload method when KK beta will be installed. or how
Thanks
Looks like your goal is to go back to B125?
Just flash recovery only from the link you posted:
http://www.androidfilehost.com/?fid=23329332407568599
You don't need to flash KK beta, flash B125 immediately.
Place UPDATE.APP from B125 in dload folder on your external SD card. Turn off the phone.
Turn it back on while holding volume down+volume up+power. Hold for at least 3 seconds. Update should start by itself.
Hope it works for you.
mstaskovan said:
Can you any one help me?
On my P6 i have instaled TWRP 2.3.6.5 and custom rom from this thread http://forum.xda-developers.com/showthread.php?t=2631444 in version 2.1
1. I want install stock twrp from this thread http://forum.xda-developers.com/showpost.php?p=49978337&postcount=249 it is a right source? it is possible install this stock twrp on version 2.3.6.5
2. Then i want install KK beta how can i do it? it is posible via dload method (local update) or how?
3. Then i want install back B125 international rom how can i do it? it is posible via dload method when KK beta will be installed. or how
Thanks
Click to expand...
Click to collapse
thanks
iwtfmcl said:
Looks like your goal is to go back to B125?
Just flash recovery only from the link you posted:
http://www.androidfilehost.com/?fid=23329332407568599
You don't need to flash KK beta, flash B125 immediately.
Place UPDATE.APP from B125 in dload folder on your external SD card. Turn off the phone.
Turn it back on while holding volume down+volume up+power. Hold for at least 3 seconds. Update should start by itself.
Hope it works for you.
Click to expand...
Click to collapse
Thanks
Now I need a phone
Try and write whether it succeeded
Thank you very much
it is work.
Can you say me if i want install again twrp 2.6.3.7 it is necessary install first KK beta for unlock bootloader or bootloader is still unlocked and i can install twrp 2.6.3.7 directly on b125?
If is it still unlocked, it is also possible install twrp 2.6.3.3 for testing any JB custom rom?
Thanks
iwtfmcl said:
Looks like your goal is to go back to B125?
Just flash recovery only from the link you posted:
http://www.androidfilehost.com/?fid=23329332407568599
You don't need to flash KK beta, flash B125 immediately.
Place UPDATE.APP from B125 in dload folder on your external SD card. Turn off the phone.
Turn it back on while holding volume down+volume up+power. Hold for at least 3 seconds. Update should start by itself.
Hope it works for you.
Click to expand...
Click to collapse
mstaskovan said:
Thank you very much
it is work.
Can you say me if i want install again twrp 2.6.3.7 it is necessary install first KK beta for unlock bootloader or bootloader is still unlocked and i can install twrp 2.6.3.7 directly on b125?
If is it still unlocked, it is also possible install twrp 2.6.3.3 for testing any JB custom rom?
Thanks
Click to expand...
Click to collapse
As I understand surdu_petru stated that you can flash TWRP 2.6.3.7 only on KK Beta, and 2.6.3.3 only on B118 unlocked firmware.
For flashing any custom ROM you have to read what ROM developer says. If developer of the custom ROM says "you can only flash it on B118", then you must be on B118. I would not try to flash it on B125 unless I was brave/dumb!
want to go back to JellyBean B125 from Kitkat beta
installed kitkatbeta > rooted > installed twrp > installed gapps > now device is too laggy & slow..
want to go back to stock jellybean B125 firmware
huzaif_a said:
installed kitkatbeta > rooted > installed twrp > installed gapps > now device is too laggy & slow..
want to go back to stock jellybean B125 firmware
Click to expand...
Click to collapse
I'd advice you to flash HYD52ROM KK. Great performance
Sent from my P6-U06 using XDA Premium 4 mobile app
huzaif_a said:
installed kitkatbeta > rooted > installed twrp > installed gapps > now device is too laggy & slow..
want to go back to stock jellybean B125 firmware
Click to expand...
Click to collapse
First, please install stock recovery KitKat, than you are able to flash any firmware you want by : external sdcard/dload/UPDATE.APP method !
Good luck !
unable to go stock recovery
kindly give some elaborated tutorial link as how to go back to stock recover & stock rom
Hi!
My p6 has now official international B510. I would like to install twrp and then custom rom, but I don't know where to start. I guess I should install kitkat beta? If so where I can download it and can I just install it via local update?
Thanks!
90mrsandman said:
Hi!
My p6 has now official international B510. I would like to install twrp and then custom rom, but I don't know where to start. I guess I should install kitkat beta? If so where I can download it and can I just install it via local update?
Thanks!
Click to expand...
Click to collapse
Hello !
If you want to install TWRP Recovery first, make sure your bootloader is unlocked !
Also you need to have some basic knowledge on how to use "adb", "fastboot" and how to set proper driver in your PC to recognized your device even in bootloader mode ! ( If you think these things are still unknown to you, than Google is your friend in order to bring this knowledge )
After, you can start with those threads : Club Huawei, How-TO - Flash Kernel, TWRP and Stock Recovery, General Bootloader Unlock for ALL Huawei Phones!, TWRP 2.7.1.0 .
Good luck :good:
Thanks a lot!
Hello,
I've bot a error when i trie to update my phone to any kk version with the local update methode or three buttons method :
I've tried B132, B512, B634 and the update to downgrade to JB but always the same error, flashing via adb Twrp for KK then reflask stock_B118 recovery but no change
there are no problems flashing a custom rom with twrp (actually i use B513repack, and before i used B510 custom rom).
Don't find a solution for this problem .....
Need help, i want to try the B634....
bab1c said:
Hello,
I've bot a error when i trie to update my phone to any kk version with the local update methode or three buttons method :
I've tried B132, B512, B634 and the update to downgrade to JB but always the same error, flashing via adb Twrp for KK then reflask stock_B118 recovery but no change
there are no problems flashing a custom rom with twrp (actually i use B513repack, and before i used B510 custom rom).
Don't find a solution for this problem .....
Need help, i want to try the B634....
Click to expand...
Click to collapse
Hi
Try to flash your B510 custom and flash with adb the B510 stock recovery in the second post here > http://forum.xda-developers.com/showthread.php?t=2709353 .
flashing via adb Twrp for KK then reflask stock_B118 recovery but no change
Click to expand...
Click to collapse
Because if you flash TWRP (for KK) then a stock recovery B118 (for JB) it's normal it's don't work. And if I don't say something wrong B118 is a chinese version.
Good luck
Ok i'll try this now....
Edit :
Flash recovery.img via fastboot ..... same result trying update B634 ????
bab1c said:
Ok i'll try this now....
Edit :
Flash recovery.img via fastboot ..... same result trying update B634 ????
Click to expand...
Click to collapse
I Don't know anything about this version you can try ..
Skyllery said:
I Don't know anything about this version you can try ..
Click to expand...
Click to collapse
here : http://forum.xda-developers.com/ascend-p6/general/b634-kitkat-t2861981
bab1c said:
here : http://forum.xda-developers.com/ascend-p6/general/b634-kitkat-t2861981
Click to expand...
Click to collapse
Yeah I have read but i didn't test it. It's quiet strange the two Update.app and the new numeration.
Skyllery said:
Yeah I have read but i didn't test it. It's quiet strange the two Update.app and the new numeration.
Click to expand...
Click to collapse
i've allready seen another update with 2 UPDATE files, doesn't remenber version....
I'm having exactly the same problem cant update to any version. Always says ' Check Module Verlist FAIL'
SOLVED
I found a solution to that problem.
Just use another kitkat recovery image to update. In my case,
https://www.androidfilehost.com/?fid=23329332407568599
did the trick.
benshannon said:
I found a solution to that problem.
Just use another kitkat recovery image to update. In my case,
https://www.androidfilehost.com/?fid=23329332407568599
did the trick.
Click to expand...
Click to collapse
It worked, the system is flashing.
I think i forgot to flash B510 boot.img .....
Thanks
I tried to flash my p6 to B512 ROM, and I had changed my recovery, duno what is my recovery version now, but just cant install any new ROM.
Actually this is the first time i hit this problem and I hv really no idea how to proceed, i flashed successfully many times previously using twrp cwm or stock recovery, just dont know what happen this time, I know how to flash a new ROM from recovery anyway, just put dload folder with UPDATE.app inside in FAT32 sdcard, but it just not success during flashing, any expert can guide me, i really appreciate your help, I attached with a photo below, i stuck at here when reboot with USB plug in, and for your information my adb cant read my device
sasadeaunty said:
I tried to flash my p6 to B512 ROM, and I had changed my recovery, duno what is my recovery version now, but just cant install any new ROM.
Actually this is the first time i hit this problem and I hv really no idea how to proceed, i flashed successfully many times previously using twrp cwm or stock recovery, just dont know what happen this time, I know how to flash a new ROM from recovery anyway, just put dload folder with UPDATE.app inside in FAT32 sdcard, but it just not success during flashing, any expert can guide me, i really appreciate your help, I attached with a photo below, i stuck at here when reboot with USB plug in, and for your information my adb cant read my device
Click to expand...
Click to collapse
So first unplug your phone from your pc otherwise it won't work.
Than I had the same as you in the picture with the recovery 'stuck' but for it simply worked if I reboot straight again into recovery via the three buttons.
Hope I could help
hi
taaeem said:
So first unplug your phone from your pc otherwise it won't work.
Than I had the same as you in the picture with the recovery 'stuck' but for it simply worked if I reboot straight again into recovery via the three buttons.
Hope I could help
Click to expand...
Click to collapse
Hi, if i reboot without plug-in the usb, it will also fail like (attached photo124)
hm..tried to use a jb rom (b125/132)..maybe you flashed a jb recovery
blueIBI said:
hm..tried to use a jb rom (b125/132)..maybe you flashed a jb recovery
Click to expand...
Click to collapse
Different stock recovery only can install certain ROM? I tried B125 already cannot. Any other recommend ROM for me to try? I rmb I flashed a quite latest stock recovery
then try the b510 or the b634..
jb recovery can only install jb rom..so do kk recovery only install kk rom as i know..
if nothing brings success try the unicom rom..
blueIBI said:
then try the b510 or the b634..
jb recovery can only install jb rom..so do kk recovery only install kk rom as i know..
if nothing brings success try the unicom rom..
Click to expand...
Click to collapse
hi, my stock recovery is 4.4.2, and I just downloaded B634 ROM and tried to flash it, but the flashing fail......
stuck at this
ro.build.version.release = 4.4.2
ro.product.name = UEDGE
Current build version is not 4.2, dont need move.
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is UNLOCK state.
sasadeaunty said:
hi, my stock recovery is 4.4.2, and I just downloaded B634 ROM and tried to flash it, but the flashing fail......
stuck at this
ro.build.version.release = 4.4.2
ro.product.name = UEDGE
Current build version is not 4.2, dont need move.
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is UNLOCK state.
Click to expand...
Click to collapse
You still have your usb cable plugged in. It will NOT work like that. @taaeem has already mentioned that.
What was the previous firmware that you had installed?
If it was a Chinese firmware, you need to try flashing this file first: https://mega.co.nz/#!8kcVADpB!JKeDlX4WQhmAP3mclNTfIzIjVllw5sMhnrj-3KSpSc4
maybe the sdcard causes this error too..had this with a 16gb fuji card..with a 8gb noname it worked..
and unplug your phone before flashing..as mentioned..
miz_pimp said:
You still have your usb cable plugged in. It will NOT work like that. @taaeem has already mentioned that.
What was the previous firmware that you had installed?
hi miz_pimp, if i do not plug in the usb cable, it will directly go into fail as showed in the picture124 i attached below, I do not rmb what firmware i installed previously, but I did a full wipe, I do not think thr is still firmware inside beside stock recovery.
Click to expand...
Click to collapse
blueIBI said:
maybe the sdcard causes this error too..had this with a 16gb fuji card..with a 8gb noname it worked..
and unplug your phone before flashing..as mentioned..
Click to expand...
Click to collapse
I tried with different sdcard without usb plugged in, still giving me fail
very strange..
maybe you do a all again..
starting with flashing a stock boot.img and recovery.img (from the b512 rom..you can extract them by the update extractor from here..just search)..
then try to flash the b512 rom by the force update method (press and hold the buttons until you see the update process starting!)..
id this fails too..well..i don't know how to help then..
if there was a cn firmware on your device (as mentioned) then search for the unicom firmware and read how to flash this and do a eventually downgrade at first)..
blueIBI said:
very strange..
maybe you do a all again..
starting with flashing a stock boot.img and recovery.img (from the b512 rom..you can extract them by the update extractor from here..just search)..
then try to flash the b512 rom by the force update method (press and hold the buttons until you see the update process starting!)..
id this fails too..well..i don't know how to help then..
if there was a cn firmware on your device (as mentioned) then search for the unicom firmware and read how to flash this and do a eventually downgrade at first)..
Click to expand...
Click to collapse
i cant even flash my recovery, when i use adb, it just shows me waiting for device, then no response. I tried most of the ways but no one can help......
hm..what might help is that you install the device drivers again..i had in the beginning a similar problem..after reinstall of the device driver (there is a package by lesscro on this forum) my device was seen even in bootloader mode correct..
blueIBI said:
hm..what might help is that you install the device drivers again..i had in the beginning a similar problem..after reinstall of the device driver (there is a package by lesscro on this forum) my device was seen even in bootloader mode correct..
Click to expand...
Click to collapse
i reinstall the driver setup from lesscro, is still the same, nth works for me, I cannot change recovery cannot flash new ROM, everything just a mess
miz_pimp said:
If it was a Chinese firmware, you need to try flashing this file first: https://mega.co.nz/#!8kcVADpB!JKeDlX4WQhmAP3mclNTfIzIjVllw5sMhnrj-3KSpSc4
Click to expand...
Click to collapse
sasadeaunty said:
i reinstall the driver setup from lesscro, is still the same, nth works for me, I cannot change recovery cannot flash new ROM, everything just a mess
Click to expand...
Click to collapse
Have you tried the file that I linked to above?
I think your problem is that you flashed the incorrect recovery version for the firmware you had on your device.
Unless you used TWRP to completely wipe your device before you flashed your stock recovery (which was not at all necessary), then you should still have a firmware on your device.
miz_pimp said:
Have you tried the file that I linked to above?
I think your problem is that you flashed the incorrect recovery version for the firmware you had on your device.
Unless you used TWRP to completely wipe your device before you flashed your stock recovery (which was not at all necessary), then you should still have a firmware on your device.
Click to expand...
Click to collapse
hi miz_pimp, thank you so muchhhhhhhhhhhhh, I am able to recover my p6 with the firmware u linked to me. Really thank you and thanks for others too for helping me too. Thanks all.
Glad you got it sorted, and you're very welcome. [emoji2]