Related
Pls find PegasusQ governor module & symsearch.ko attached.
PegasusQ Governor by ByungChang Cha of Samsung & symsearch by Scrilax_CZ.
1. For performance but less battery life. Very snappy.
2. Only works with PDroid's custom kernel V01G [forum.frandroid.com/topic/141908-icskernel-custom-kernel-wcs-v01g-240413/]
3. Stock kernel not supported due tracing config not enabled.
4. Dual core & deep sleep operating satisfactorily.
5. Compiled with WCS ICS kernel source. [3.0.13]
6. Other Tinno S8073 based phone can try if same kernel version but must install PDroid's kernel or kernel with tracing config enabled.
6. Load symsearch.ko first then cpufreq_pegasusq.ko
Happy trying.:good:
Technical information:
The kernel of Linux: 3.4.0.
Latest version: 24/05/2016.
Version Nitrogen: 3.0.
Compiled by: Linaro 4.9.4.
Based on: MAKO (occam).
Which devices: E975, E975*, F180*, E977, E987, E973, E971, LS970, E970 | GEEHRC, GEEHRC4G, GEESPR, GEEB.
Sources: https://github.com/nitrogen-devs/android_NitrogenEx_kernel
Download latsets builds: https://github.com/nitrogen-devs/android_NitrogenEx_zips
Acceleration turn on themselves.
For Lollipop and Marshmallow roms
Features:
Overclock CPU up to 1.7 GHz
Underclock CPU up to 162 MHz
Overclock GPU up to 622 MHz
Add GPU voltage control
Add CPU voltage control
Change 85° as Temp Threshold
Add UKSM
Add FIFO, SIO, VR, ZEN I/O Schedulers
Add abyssplugv2, lionheart, lulzactive, pegasusq, uberdemand, wheatley, ondemandplus, smartmaxV2, smartass, nightmare, darkness, alucard, HYPER, optimax, yankdemand, smartass H3 CPU governors
Add simple GPU governor
Add CPUFREQ limiter
Add MSM hotplug
Add CPU boost driver
Add USB otg support
Add Use Android device as USB keyboard/mouse
Add USB fast charging support
Add Fixes media playback (msm_rotator driver fixes)
Add Faux sound control
Add Faux speaker control
Add Faux gamma control
Add wifi wakelock
Add frandom - 2.4
Add fsync - 2.4
Add DoubleTap2Wake - 2.4
Add Sweep2Wake - 2.4
Add Screen Off Track - 2.4
Add Volume Control - 2.4
Add ZRAM - 2.4
Stock WiFi driver - 2.6
SeLinux permissive - 2.6
Use Linaro 4.9.4 compiler
xz algorithm for compression of a kernel is used and xz fixes
Calibrated gamma and contrast
Read Ahead buffer changed to 3072 kb
CPU Freq default 162 MHz - 1.5 GHz
GPU Freq default 400 MHz
Synched to latest MM sources
And other features & fixes included
Full changelog
Bold - by default
Still thanks to :
Faux123 : https://github.com/faux123
Showp1984 : https://github.com/showp1984
Franciscofranco : https://github.com/franciscofranco
ChangYeoun : https://github.com/ChangYeoun
Jollaman999 : https://github.com/jollaman999
Gu5t3r : http://forum.xda-developers.com/member.php?u=4665716
PsychoGame : http://forum.xda-developers.com/member.php?u=4647521
Christopher83 : https://github.com/Christopher83
Loller79: https://github.com/Loller79
xyyx: http://forum.xda-developers.com/member.php?u=5422618
P. S. Want to help or make a contribution? Accept pull requests on github.
XDA:DevDB Information
Nitrogen Extreme Kernel, Kernel for the LG Optimus G
Contributors
Mr.MEX
Source Code: https://github.com/nitrogen-project
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 3.0
Stable Release Date: 2016-05-24
Created 2015-05-21
Last Updated 2016-05-23
Settings
reserved
Are you aware you didnt include a download link?
The links are in the another thread with the same name of this
OMGMatrix said:
Are you aware you didnt include a download link?
Click to expand...
Click to collapse
http://forum.xda-developers.com/devdb/project/?id=9888#downloads
What is the difference between this and the other topic?
(Sorry for my english)
lucasrods said:
What is the difference between this and the other topic?
(Sorry for my english)
Click to expand...
Click to collapse
This one is for kernel, the other is for a tweaked build of CM with this kernel built in.
nchc said:
This one is for kernel, the other is for a tweaked build of CM with this kernel built in.
Click to expand...
Click to collapse
I mean, from this: http://forum.xda-developers.com/showthread.php?t=3085312
Hi , I've got some troubles after I flash your kernel or your cyanogen released. After I restart, apps crash randomly (ex trebuchet, camera, playstore etc.) or my phone goes to bootloop. I don't have these problems with solid drivers. Do you know why?
Thanks
Aruken said:
Hi , I've got some troubles after I flash your kernel or your cyanogen released. After I restart, apps crash randomly (ex trebuchet, camera, playstore etc.) or my phone goes to bootloop. I don't have these problems with solid drivers. Do you know why?
Thanks
Click to expand...
Click to collapse
You need to put on a clean firmware.
To put the kernel into a kernel - evil.
Do you know where I can find a clean firmware? Like E97520B_00.kdz or I just have to flash aroma v7 rom?
Aruken said:
Do you know where I can find a clean firmware? Like E97520B_00.kdz or I just have to flash aroma v7 rom?
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?s=&showtopic=420801&view=findpost&p=32742458
http://4pda.ru/forum/index.php?showtopic=420801
/edit
Ok sorry i dont know why there a two threads..
Just flashed this one right here.
I have to flash this after flash the rom and gapps?
(sorry for my english)
0.3.2:
Disabled undervolt.
Added frequency 50, 75 MHz (added system.exe), 2.03 GHz.
CPU frequency: 50 MHz min, max 1.51 GHz.
The GPU frequency: 400 MHz.
Fixed random reboots.
Mr.MEX said:
0.3.2:
Disabled undervolt.
Added frequency 50, 75 MHz (added system.exe), 2.03 GHz.
CPU frequency: 50 MHz min, max 1.51 GHz.
The GPU frequency: 400 MHz.
Fixed random reboots.
Click to expand...
Click to collapse
I'm using AICP build by dadi11, can i flash this kernel? I have to do any wipe?
Sorry i'm noob [emoji14]
You can.
Wipe dalvik and cache.
/edit
Delete me
Will the camera on geeb works in the last version as in Solid?
In the previous one it wasn't working.
Now it boots perfect.... Before, the only version can boot on my phone was 0.28, but now this one also boot... Only sometimes i've got random reboots when i'm using a bluetooth headset, but i don't know if it's kernel or rom, cause with solid kernel i've got the same... Thanks for your work!!!
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazyAquaKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazyAquarKernel over the kernel that came with your ROM!!)
Toolchain:
UBERTC 4.9 Toolchain
CPU:
- governors:
crazyactive(my governor:balance governor for great battery life and performance based on interactive)
interactive
impulse
ondemand
smartmax
zzmoove
ondemandplus
pegasusq
nightmare
conservative
lionheart
powersave
userspace
yankactive
smartmax_eps
intellidemand
intelliactive
- MSM Limiter
- input boost
- state notifier
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
zen
vr
fifo
TCP congestion controls:
cubic
bic
westwood
htcp
highspeed
hybla
reno
bic
hybla
vegas
lp
yeah
illinois
scalable
- tcp congestion changed to Westwood
GPU:
- governors:
msm-adreno-tz
simple_ondemand
powersave,performance
userspace
cpubw_hwmon
msm_cpufreq
- Adreno idler
- simple gpu algorithm
Thermal control:
- Intelli thermal v2
Hotplug:
- Disabled MP Decision hotplug
- Enabled Bricked Hotplug
- Prevent wakelock when ambiend display disabled(misc control tab)
Sound:
- Faux sound
More:
- Kernel runs with SELinux permissive by default
- init.d support
- fast charge
- pvs level info
- insecure kernel (adb has root privileges)
- Frandom support
- Disabled Arch Power
- CRC Check Disabled
- Gentle Fair Sleepers (Disabled by default)
- Enabled All Suspend and Idle Modes
- Power Suspend Mode/State
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Supported Variants:
D800
D801
D802/5/6
F320
L01F
LS980
VS980
LGL22
Download Link CrazyAquaKernel [AnyKernel]:https://www.androidfilehost.com/?w=files&flid=207696
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazyAquarKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazyAquaKernel !!!!
Credits
thx Showp1984
thx Faux123
thx dorimanx
thx Savoca
thx RenderBroken
thx Neobuddy
thx Myfluxi
thx FranciscoFranco
thx SultanXDA
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx yank555
thx apb_axel
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazyAquaKernel, Kernel for the LG G2
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazyAquaKernel-g2-los
Kernel Special Features:
Version Information
Status: Beta
Created 2017-08-17
Last Updated 2017-08-17
FAQ
Recommended app : Kernel Adiutor
changelogs
v1.0/17-08-17
- initial release
If u use zzmove governor disable all the hotplugs coz it use its own hotplug as anyone knows.
[Q]How i select profile from kernel tweaker app?
[A]You need to go in governor tunable-profile number and select the number of the profile from the list
Zzmove profiles
1 ) Default -> will set governor defaults
2 )ybat -> Yank Battery -> a very good battery/performance balanced setting - DEV-NOTE: highly recommended!
3 )ybatext-> Yank Battery Extreme -> like yank battery but focus on battery saving
4 )zzbat-> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving - DEV-NOTE: might give some lags!
5 )zzbatp -> ZaneZam Battery Plus -> NEW! reworked faster battery setting - DEV-NOTE: recommended too!
6 )zzopt -> ZaneZam Optimized -> balanced setting with no focus in any direction - DEV-NOTE: relict from back in the days, even though some people still like it!
7 )zzmod -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online
8 )zzperf -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast - down scaling/hotplugging behaving
9 )zzinz-> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience!
10 )zzgame-> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay
reserve1
reserve2
reserve3
Great thanks
So I flashed it on my D802 with CrDroid 3.6 (it's LOS based). I wiped caches also.
In Kernel Auditor I set zzmove +ybat, disabled hotplugs, set this all to run on boot and now everything has a lag.
Unlocking screen, starting apps, even keyboard (it's very hard to write this post cause the lag).
Pros (for me):
It booted.
Sound tab in Kernel Auditor.
I'll try to play with different governors and if it wont help I will go back to my backup and standard CrDroid kernel.
BTW: Thanks for your work!
MarekAG said:
So I flashed it on my D802 with CrDroid 3.6 (it's LOS based). I wiped caches also.
In Kernel Auditor I set zzmove +ybat, disabled hotplugs, set this all to run on boot and now everything has a lag.
Unlocking screen, starting apps, even keyboard (it's very hard to write this post cause the lag).
Pros (for me):
It booted.
Sound tab in Kernel Auditor.
I'll try to play with different governors and if it wont help I will go back to my backup and standard CrDroid kernel.
BTW: Thanks for your work!
Click to expand...
Click to collapse
It is a little laggy coz it use bricked and mpdecsion is fully disabled,i disabled full for amazing battery life and not all time on all the cores ,now i try tweak the hotplug for more performance
Bootloop on F320
F320 hasn't official rom so I was using d802(devices check removed)LOS 14.1 and lambda kernel f320 Please check it thanks
eggimong said:
F320 hasn't official rom so I was using d802(devices check removed)LOS 14.1 and lambda kernel f320 Please check it thanks
Click to expand...
Click to collapse
I have f320 kernel, now for rom i can't do something coz i don't have time
Sent from my iPhone using Tapatalk Pro
Dev sir, could you tell me the difference between aqua and super version?
Genie's said:
Dev sir, could you tell me the difference between aqua and super version?
Click to expand...
Click to collapse
More updated and clean kernel
Thanks for continuing the work
Enviado desde mi LG-D802 mediante Tapatalk
Which application to customize?
omer.bulbul144 said:
Which application to customize?
Click to expand...
Click to collapse
I recommend kernel adiutor
CrazyGamerGR said:
I recommend kernel adiutor
Click to expand...
Click to collapse
Whichever?
https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor&hl=tr
https://forum.xda-developers.com/android/apps-games/kernel-adiutor-mod-singularity-kernel-t3333549
omer.bulbul144 said:
Whichever?
https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor&hl=tr
https://forum.xda-developers.com/android/apps-games/kernel-adiutor-mod-singularity-kernel-t3333549
Click to expand...
Click to collapse
Up to you m8,maybe soon i ll add a kernel tweaker in my kernels
Sent from my iPhone using Tapatalk Pro
Works XOSP?
Enviado desde mi LG-D802 mediante Tapatalk
slipknot31 said:
Works XOSP?
Enviado desde mi LG-D802 mediante Tapatalk
Click to expand...
Click to collapse
It work with every lineageos based rom
Sent from my iPhone using Tapatalk Pro
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazyAquaKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazyAquaKernel over the kernel that came with your ROM!!)
Toolchain:
UBERTC 4.9 Toolchain
CPU:
- governors:
crazyactive(my governor:balance governor for great battery life and performance based on interactive)
interactive
impulse
ondemand
smartmax
zzmoove
ondemandplus
pegasusq
nightmare
conservative
lionheart
powersave
userspace
yankactive
smartmax_eps
intellidemand
intelliactive
- MSM Limiter
- input boost
- state notifier
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
zen
vr
fifo
TCP congestion controls:
cubic
bic
westwood
htcp
highspeed
hybla
reno
bic
hybla
vegas
lp
yeah
illinois
scalable
- tcp congestion changed to Westwood
GPU:
- governors:
msm-adreno-tz
simple_ondemand
powersave,performance
userspace
cpubw_hwmon
msm_cpufreq
- Adreno idler
- simple gpu algorithm
Thermal control:
- Intelli thermal v2
Hotplug:
- Disabled MP Decision hotplug
- Enabled Bricked Hotplug
- Prevent wakelock when ambiend display disabled(misc control tab)
Sound:
- Faux sound
More:
- Kernel runs with SELinux permissive by default
- init.d support
- insecure kernel (adb has root privileges)
- fast charge
- pvs level info
- Kcal v2
- Frandom support
- Disabled Arch Power
- CRC Check Disabled
- Gentle Fair Sleepers (Disabled by default)
- Enabled All Suspend and Idle Modes
- Power Suspend Mode/State
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Download Link CrazyAquaKernel [AnyKernel]:https://www.androidfilehost.com/?fid=817550096634793333
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazyAquaKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazyAquaKernel !!!!
Credits
thx Showp1984
thx Faux123
thx Savoca
thx RenderBroken
thx Neobuddy
thx Myfluxi
thx FranciscoFranco
thx SultanXDA
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx yank555
thx apb_axel
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazyAquaKernel, Kernel for the OnePlus One
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazyAquaKernel-opo-los
Kernel Special Features:
Version Information
Status: Beta
Created 2017-08-17
Last Updated 2017-08-17
FAQ
Recommended app : Kernel Adiutor
changelogs
v1.0/17-08-17
- initial release
If u use zzmove governor disable all the hotplugs coz it use its own hotplug as anyone knows.
[Q]How i select profile from kernel tweaker app?
[A]You need to go in governor tunable-profile number and select the number of the profile from the list.
Zzmove profiles
1 ) Default -> will set governor defaults
2 )ybat -> Yank Battery -> a very good battery/performance balanced setting - DEV-NOTE: highly recommended!
3 )ybatext-> Yank Battery Extreme -> like yank battery but focus on battery saving
4 )zzbat-> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving - DEV-NOTE: might give some lags!
5 )zzbatp -> ZaneZam Battery Plus -> NEW! reworked faster battery setting - DEV-NOTE: recommended too!
6 )zzopt -> ZaneZam Optimized -> balanced setting with no focus in any direction - DEV-NOTE: relict from back in the days, even though some people still like it!
7 )zzmod -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online
8 )zzperf -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast - down scaling/hotplugging behaving
9 )zzinz-> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience!
10 )zzgame-> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay
reserve1
reserve2
You're back! Thanks for still contributing to bacon.
Mr.Ak said:
You're back! Thanks for still contributing to bacon.
Click to expand...
Click to collapse
I promised it where i will come back
Downloading
Minions_Army said:
Downloading
Click to expand...
Click to collapse
Cool^^
CrazyGamerGR said:
Cool^^
Click to expand...
Click to collapse
Performance is good
Minions_Army said:
Performance is good
Click to expand...
Click to collapse
Thx for feedback m8
Will it work with Sultan's N ROM ?
tamboli007 said:
Will it work with Sultan's N ROM ?
Click to expand...
Click to collapse
You can try m8 coz he use caf source but los work too
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
You can try m8 coz he use caf source but los work too
Click to expand...
Click to collapse
It's working fine:good:. Thanks
Edit :- camera doesn't work .
tamboli007 said:
It's working fine:good:. Thanks
Edit :- camera doesn't work .
Click to expand...
Click to collapse
It is rom problem coz i didn't added something for camera
He make changes for camera coz i used his rom on my op3,i need to do some changes to work correct with caf roms too
Sent from my iPhone using Tapatalk Pro
I hope u plan to support custom blobs too. OOS v2 (sultan) or OOS v3 instead of CM blobs
MrxSiN said:
I hope u plan to support custom blobs too. OOS v2 (sultan) or OOS v3 instead of CM blobs
Click to expand...
Click to collapse
Maybe soon m8
Sent from my iPhone using Tapatalk Pro
downloading.., btw., kernel auditor should be used to do the changes..?
murti52 said:
downloading.., btw., kernel auditor should be used to do the changes..?
Click to expand...
Click to collapse
Yeh i recommend it
this one won't work on this rom if it's AOSP?
https://forum.xda-developers.com/oneplus-one/development/rom-aospextended-rom-v3-1-t3547628
Yes, I'm a noob ......I can only flash rom's
I'm lost with all these versions: CAF LOS,CM, AOSP ..... special Camera HALs ....can someone explain what works on what ?
the AOSP rom is great but battery charging is superslow and cpu undervolting would also be great
I'm looking to get the best battery life rom without choppy interface
I never game on my OPO , just call,txt and internet.
any Rom /Kernel suggestions (or gouvernor settings)
=BUTTERFLY KERNEL=
Your warranty is now void!
We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you
Features:
Pie base: CAF & Prima Tag by LA.UM.7.6.r1-04500-89xx.0
Oreo base: CAF & Prima Tag by LA.UM.6.6.r1-11000-89xx.0
Legacy base: not updated pure sources from MiCode github
(prima tag LA.UM.7.6.r1-05500-89xx / LA.UM.6.6.r1-11300-89xx.0)
• KCAL color control
• Vibration intensity control
• Sound gain control
• Audio codec quality improved
• exFAT Support
• NTFS support
• F2FS support
• SquahFS support
• CIFS/SMB support
• Added CPU Hotplug (default disabled)
• Set lz4 for better zram work
• Boeffla wakelock blocker
• Added defaults rules for Boeffla wakelock blocker
• Disable vendor verify and set no verity
• CRC32: disable by default & enable toogle (average 30% I/O performance profit)
• Few patches from Franco kernel (disabled a lot of debugging stuff)
• Fsync: on/off support
• Battery deep optimisation: undervolting & additional tweaks
• Added Adreno Real Idler (supported turning it on/off)
• Improved interactive governor (patch from Franco kernel)
• Improved CPU boost, default is disabled (patch from Franco kernel)
• Improved conservative governor (patch from Franco kernel)
• I/O schedulers: noop, deadline, bfq, cfq (default), sio, fiops, maple, tripndroid, zen, anxiety, sioplus, fifo, v(r)
• Added CPU governors: darkness, zzmoove, relax, impulse, electron, nonconservative, lionheart, clarity, blu_active, yankactive, intelliactive, conservativex, ondemandx, interactivex, bioshock, darknessv5, alucard, smartmax_eps, pegasusq, lionfish, hyper, despair, barry_allen, xperience, alessa, chill, ondemandplus, ironactive, culvitation, tripndroid
• Added GPU governors: guardian, balanced, msm-adreno-plus
• TCP congestion algorithms: cubic, reno, westwood (default)
• Installer include fix for Wi-Fi SELinux permission
• Kernel installer also support custom ROMs
• GCam focus fix (thanks @teftel1608 and @33bca)
• GPU: clocks table reworked (lags free, performance grew). OC max gpu freq now is 725MHz
• Added WireGuard 0.0.20190601
• Fix for goodix-fp gestures on stock (thanks to @artyom5613 & @Broomber)
• Also in the v4 installer included fix fpc-fp gestures for the customs rom
now gestures for both fingerprints is are:
* swipe2right - paste text
* others like in rom's setting
(if you not like this - change it in the /system/usr/keylayout/uinput-*.kl)
• Memory & battery life optimization due config settings for kernel
• Added a block to wakelock from wifi
• I/O optimization
• Hide unlocked bootloader state (for apps like bank clients etc)
• Patches from Franco "mido" kernel for battery life improvement
• Added gpu Adreno simple algorithm (beast!!)
• Found a reason for which the CPU could for a long time not to raise the frequency to the maximum, it's all in the file /vendor/etc/thermal-engine.conf
See samples how to improve situation
• Compiled with GCC 9.1.0, which gave an increase in performance and speed of the kernel
• Reworked undervolting, battery lives even longer
• Added voltage control
• Maximum CPU frequency is now 2.4GHz
• EUOC version has a maximum GPU frequency of 750MHz
• added support for display status for CPU Hotplug & some schedulers
• all schedulers that have display status support:
alucard, chill, clarity, cultivation, darkness, electron, impulse, intelliactive, ironactive, nightmare, relaxed, anxiety-iosched and maple-iosched
• added drivers for few USB-Ethernet adapters
• added nightmare and dancedance CPU governors
• updated version with 2.2GHz overclocking
• removed the patch for hiding the bootloader state (there are more problems than good with it)
• new settings for a smooth interface in installer (applied for GSI only)
- DT2W fix for fts_ts [default disabled] (thanks @33bca) * tested on customs and GSIs. for latest maybe need to enable "Handwave gesture" in "Phh Treble Settings" > "Doze features" * #TODO
- Installer include Magisk preserve #TODO
<< download Pie v5.5 || download Pie v4.4 >>
<< download Oreo v5.5 || download Oreo v4.4 >>
undervolted (U) lower voltage for decrease overheat. also incredible battery saving
overclocked (OC) CPU max frequency is 2.4GHz, GPU max frequency is 725MHz
extra-overclocked (E) GPU max frequency is 750MHz (if you will face with graphical glitches - don't use it!)
Installations:
Backup boot.img, /system/lib/modules, /system/usr/keylayout and /vendor/lib/modules folders, /vendor/bin/init.qcom.post_boot.sh file if you want to go back
Flash Zip file with any TWRP recovery, wipe Dalvik cache, reboot and enjoy ^_^
Notice: if you have Magisk with modules installed maybe you'll get bootloop.
If you have Magisk don't need reinstall it after kernel because installer will save Magisk #TODO
Right way: if you have Magisk and modules - deinstall all. Then flash stock boot.img, then custom kernel, then other stuff like TWRP and Magisk.
Enough just dirty flashing kernel and then Magisk if you need it. All yours Magisk modules will preserved.
Issues:
- DT2W not work for fts_ts touchscreen
- tell me if find
XDA:DevDB Information
Butterfly kernel for Xiaomi Mi A2 Lite "daisy"
Contributors:
eremitein
Source Code:
https://github.com/eremitein/xiaomi_kernel_msm8953_daisy_butterfly
CREDITS:
All people, who made good code for this platform
Version Information
Status: Stable/Experimental
Release Date: 2019-04-15 (UTC +0)
Created: 2019-04-07
Last Updated: 2019-08-08
.
=VARIOUS POWER PROFILES=
[BATTERY DEEP BACKUP]
CPU governor: conservative
CPU max freq: 1804 MHz
GPU governor: msm-adreno-tz or guardian
Adreno idler: on
Tune Boeffla Wakelock Blocker: read this manual
CPU Hotplug: see attached screenshot
# Give ~10 minutes SOT per 1% battery while web browsing #
[NORMAL MODE]
CPU governor: ondemand / interactive
CPU max freq: set highest
GPU governor: msm-adreno-tz or balanced if lagzzs)
Adreno idler: on
CPU Hotplug: off
# Give ~8 minutes SOT per 1% battery while web browsing #
[PERFORMANCE MODE]
CPU governor: intelliactive, blue_active or nonconservative
CPU max freq: set highest
GPU governor: performance or msm-adreno-plus
Adreno idler: on
CPU boost: on
CPU boost freq: set to 1.84, 2.0 or 2.2GHz
CPU Hotplug: off
# Give ~5 minutes SOT per 1% battery while web browsing #
.
I will not help users if they are:
- using Magisk and moreover they installed modules;
- made any kernel settings (selected exotic governors, turned on hotplug and etc.);
- using option "Disable HW overlays";
- not sure that the same problems were not on the standard kernel
- not follow installation guide
All OC versions is always have CPU 2.2GHz
if not for you, then this is maybe if:
- you SoC/voltageregulator/phone doesn't support overclocking
- your device overheated due high outside temp or high load
- you system set restrictions to overclocking
.
Now im using CAF kernel with stock rom i want to flash butterfly what should i do delete CAF then install it??and for magisk delete all modul ?
hendri88 said:
Now im using CAF kernel with stock rom i want to flash butterfly what should i do delete CAF then install it??and for magisk delete all modul ?
Click to expand...
Click to collapse
yes, thats right
you may try dirty install but this is not a guarantee what system boot due to magisk specific
best way is remove all modules from magisk, remove magisk via flashing stock kernel and then boot to twrp and install butterfly
eremitein said:
yes, thats right
you may try dirty install but this is not a guarantee what system boot due to magisk specific
best way is remove all modules from magisk, remove magisk via flashing stock kernel and then boot to twrp and install butterfly
Click to expand...
Click to collapse
Ok i will try it thx bro
added power modes samples
https://forum.xda-developers.com/showpost.php?p=79288538&postcount=2
May I ask if this kernel could be modified so we can overclock? How exactly do we need to go about and do the modifications to the PLL tables? It'd be great if you could help out and make a tutorial or something.
Zewyni said:
May I ask if this kernel could be modified so we can overclock? How exactly do we need to go about and do the modifications to the PLL tables? It'd be great if you could help out and make a tutorial or something.
Click to expand...
Click to collapse
no, this build haven't overclock feature
Kernel updated (download v2)
Changelog v2:
Pie CAF & Prima updated to LA.UM.7.6.r1-04500-89xx.0
Improved interactive CPU governor (patch from Franco kernel)
Improved CPU boost and enable it (patch from Franco kernel)
Reworked conservative and nonconservative CPU governors
Reworked guardian, balanced and msm-adreno-plus GPU governors
Kernel installer now also support custom ROMs
Also have some changes in Power profiles
The touch sensetivity is somehow better with this kernel but I really miss dt2w... I'll be testing it for the week, hope you can fix dt2w! Thanks for your work on our device!
Eddie_53 said:
The touch sensetivity is somehow better with this kernel but I really miss dt2w... I'll be testing it for the week, hope you can fix dt2w! Thanks for your work on our device!
Click to expand...
Click to collapse
dt2w not supporting due missing stuff in official Xiaomi kernel sources
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/issues/1044
I can confirm that touch sensitivity is better on this Kernel. Gcam also runs smoother!
ExFAT support doesn't seem to be working though. I've tried to read an SD Card ExFAT formatted and it didn't work (corrupt error message).
eremitein said:
=VARIOUS POWER PROFILES=
[BATTERY DEEP BACKUP]
CPU governor: conservative
CPU max freq: 1689 MHz
GPU governor: guardian or msm-adreno-tz
Adreno idler: on
Tune Boeffla Wakelock Blocker:read this manual
CPU Hotplug: see attached screenshot
# Give 10-12 minutes SOT per 1% battery while web browsing #
[NORMAL MODE]
CPU governor: ondemand / interactive
CPU max freq: 2016 MHz
GPU governor: msm-adreno-tz or balanced if lagzzs)
Adreno idler: on
CPU Hotplug: off
# Give ~6 minutes SOT per 1% battery while web browsing #
[PERFORMANCE MODE]
CPU governor: nonconservative
CPU max freq: 2016 MHz
GPU governor: performance or msm-adreno-plus
Adreno idler: off
CPU Hotplug: off
# Give 4-5 minutes SOT per 1% battery while web browsing #
.
Click to expand...
Click to collapse
How to switch from one profile to another? I have kernel adiutor installed but there is no profile I the kernel section to select. Thanks to everyone answer and to the Dev for his work. Sorry for my English
Kr47os said:
How to switch from one profile to another? I have kernel adiutor installed but there is no profile I the kernel section to select. Thanks to everyone answer and to the Dev for his work. Sorry for my English
Click to expand...
Click to collapse
you may create various profiles in Kernel Aduitor
Tools > Profile
and which rom you using?
eremitein said:
you may create various profiles in Kernel Aduitor
Tools > Profile
and which rom you using?
Click to expand...
Click to collapse
I'm using stock ROM Pie 10.0.4 update version.
Kernel updates (see topic)
Changelog v2.99:
Added new builds:
- Oreo base CAF & Prima Tag by LA.UM.6.6.r1-11000-89xx.0
- Legacy base (not updated pure sources from MiCode github)
- Installer totally fixed for support wifi on custom roms
Oreo base is only for oreo vendors (9.6.x.0 versions)!!!
Why i built this and legacy variants?)
For compatibility. Because some people still using oreo stock or 8.1 vendor with GSI
BJumperBR said:
I can confirm that touch sensitivity is better on this Kernel. Gcam also runs smoother!
ExFAT support doesn't seem to be working though. I've tried to read an SD Card ExFAT formatted and it didn't work (corrupt error message).
Click to expand...
Click to collapse
for clean testing exFAT you need should be sure what ROM have support this FS
if with other kernel on your rom exfat work then, yeahh, something wrong with my kernel exfat
thanks for feedback)
eremitein said:
for clean testing exFAT you need should be sure what ROM have support this FS
if with other kernel on your rom exfat work then, yeahh, something wrong with my kernel exfat
thanks for feedback)
Click to expand...
Click to collapse
I'm on Stock ROM 10.0.4.0.
So, no exDAT support, right?
I am undecided whether to stay in oreo with this kernel or pie always switch to this kernel.
It is wrong to ask, instead of trying, but I don't have much time to test
No one with any feedback on the battery and stability?
(Noob question, what is it the difference of legacy kernel? )