FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazyAquaKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazyAquarKernel over the kernel that came with your ROM!!)
Toolchain:
UBERTC 4.9 Toolchain
CPU:
- governors:
crazyactive(my governor:balance governor for great battery life and performance based on interactive)
interactive
impulse
ondemand
smartmax
zzmoove
ondemandplus
pegasusq
nightmare
conservative
lionheart
powersave
userspace
yankactive
smartmax_eps
intellidemand
intelliactive
- MSM Limiter
- input boost
- state notifier
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
zen
vr
fifo
TCP congestion controls:
cubic
bic
westwood
htcp
highspeed
hybla
reno
bic
hybla
vegas
lp
yeah
illinois
scalable
- tcp congestion changed to Westwood
GPU:
- governors:
msm-adreno-tz
simple_ondemand
powersave,performance
userspace
cpubw_hwmon
msm_cpufreq
- Adreno idler
- simple gpu algorithm
Thermal control:
- Intelli thermal v2
Hotplug:
- Disabled MP Decision hotplug
- Enabled Bricked Hotplug
- Prevent wakelock when ambiend display disabled(misc control tab)
Sound:
- Faux sound
More:
- Kernel runs with SELinux permissive by default
- init.d support
- fast charge
- pvs level info
- insecure kernel (adb has root privileges)
- Frandom support
- Disabled Arch Power
- CRC Check Disabled
- Gentle Fair Sleepers (Disabled by default)
- Enabled All Suspend and Idle Modes
- Power Suspend Mode/State
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Supported Variants:
D800
D801
D802/5/6
F320
L01F
LS980
VS980
LGL22
Download Link CrazyAquaKernel [AnyKernel]:https://www.androidfilehost.com/?w=files&flid=207696
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazyAquarKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazyAquaKernel !!!!
Credits
thx Showp1984
thx Faux123
thx dorimanx
thx Savoca
thx RenderBroken
thx Neobuddy
thx Myfluxi
thx FranciscoFranco
thx SultanXDA
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx yank555
thx apb_axel
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazyAquaKernel, Kernel for the LG G2
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazyAquaKernel-g2-los
Kernel Special Features:
Version Information
Status: Beta
Created 2017-08-17
Last Updated 2017-08-17
FAQ
Recommended app : Kernel Adiutor
changelogs
v1.0/17-08-17
- initial release
If u use zzmove governor disable all the hotplugs coz it use its own hotplug as anyone knows.
[Q]How i select profile from kernel tweaker app?
[A]You need to go in governor tunable-profile number and select the number of the profile from the list
Zzmove profiles
1 ) Default -> will set governor defaults
2 )ybat -> Yank Battery -> a very good battery/performance balanced setting - DEV-NOTE: highly recommended!
3 )ybatext-> Yank Battery Extreme -> like yank battery but focus on battery saving
4 )zzbat-> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving - DEV-NOTE: might give some lags!
5 )zzbatp -> ZaneZam Battery Plus -> NEW! reworked faster battery setting - DEV-NOTE: recommended too!
6 )zzopt -> ZaneZam Optimized -> balanced setting with no focus in any direction - DEV-NOTE: relict from back in the days, even though some people still like it!
7 )zzmod -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online
8 )zzperf -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast - down scaling/hotplugging behaving
9 )zzinz-> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience!
10 )zzgame-> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay
reserve1
reserve2
reserve3
Great thanks
So I flashed it on my D802 with CrDroid 3.6 (it's LOS based). I wiped caches also.
In Kernel Auditor I set zzmove +ybat, disabled hotplugs, set this all to run on boot and now everything has a lag.
Unlocking screen, starting apps, even keyboard (it's very hard to write this post cause the lag).
Pros (for me):
It booted.
Sound tab in Kernel Auditor.
I'll try to play with different governors and if it wont help I will go back to my backup and standard CrDroid kernel.
BTW: Thanks for your work!
MarekAG said:
So I flashed it on my D802 with CrDroid 3.6 (it's LOS based). I wiped caches also.
In Kernel Auditor I set zzmove +ybat, disabled hotplugs, set this all to run on boot and now everything has a lag.
Unlocking screen, starting apps, even keyboard (it's very hard to write this post cause the lag).
Pros (for me):
It booted.
Sound tab in Kernel Auditor.
I'll try to play with different governors and if it wont help I will go back to my backup and standard CrDroid kernel.
BTW: Thanks for your work!
Click to expand...
Click to collapse
It is a little laggy coz it use bricked and mpdecsion is fully disabled,i disabled full for amazing battery life and not all time on all the cores ,now i try tweak the hotplug for more performance
Bootloop on F320
F320 hasn't official rom so I was using d802(devices check removed)LOS 14.1 and lambda kernel f320 Please check it thanks
eggimong said:
F320 hasn't official rom so I was using d802(devices check removed)LOS 14.1 and lambda kernel f320 Please check it thanks
Click to expand...
Click to collapse
I have f320 kernel, now for rom i can't do something coz i don't have time
Sent from my iPhone using Tapatalk Pro
Dev sir, could you tell me the difference between aqua and super version?
Genie's said:
Dev sir, could you tell me the difference between aqua and super version?
Click to expand...
Click to collapse
More updated and clean kernel
Thanks for continuing the work
Enviado desde mi LG-D802 mediante Tapatalk
Which application to customize?
omer.bulbul144 said:
Which application to customize?
Click to expand...
Click to collapse
I recommend kernel adiutor
CrazyGamerGR said:
I recommend kernel adiutor
Click to expand...
Click to collapse
Whichever?
https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor&hl=tr
https://forum.xda-developers.com/android/apps-games/kernel-adiutor-mod-singularity-kernel-t3333549
omer.bulbul144 said:
Whichever?
https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor&hl=tr
https://forum.xda-developers.com/android/apps-games/kernel-adiutor-mod-singularity-kernel-t3333549
Click to expand...
Click to collapse
Up to you m8,maybe soon i ll add a kernel tweaker in my kernels
Sent from my iPhone using Tapatalk Pro
Works XOSP?
Enviado desde mi LG-D802 mediante Tapatalk
slipknot31 said:
Works XOSP?
Enviado desde mi LG-D802 mediante Tapatalk
Click to expand...
Click to collapse
It work with every lineageos based rom
Sent from my iPhone using Tapatalk Pro
Related
Spirit Kernel
This kernel is ONLY for AOSP based ROMs. This will NOT work on the stock Moto roms.
I will update this regularly as I have time and will add new features and fixes as well.
If you have any feature requests or ideas that haven't been seen before, don't hesitate to post it here!!
PLEASE READ
How to report a bug?
Include the following in your bug report:
The ROM you are currently using + a link to the ROM's thread
A log, preferably dmesgs or kmsgs (use Google to find out how to pull these from your device)
The version of SpiritKernel you use (=rx, e.g.r3)
Bug reports not meeting these requirements will be ignored.
NO BUG REPORTS ON EXPERIMENTAL BUILDS!
Features
This Hybrid kernel contains features from great kernel devs with like faux,franco and neobuddy,optimized for titan to make it work.Initially there are less features but I will add much more soon
[*]Based on the Latest CyanogenMod sources
[*]Patched 3.4.106 kernel
[*]Governors: ondemand/userspace/powersave/performance/interactive/IntelliMM/inteliidemand/intelliactive/smartmax/pegasusQ
[*]Hotplug: MPDecision/MSM Hotplug/Intelliplug(default)
[*]Intellithermal v2
[*]DT2W/S2W/S2S Wake controls
[*]CPU Underclocking 192Mhz
[*]GPU OC 533Mhz | UC 100Mhz
[*]Add MSM Hotplug Driver
[*]Asynchronous Fsync extracted from HTC
[*]Sweep2Sleep driver
[*]Dynamic management of timer slack
[*]Slimbus OC thanks to neeobuddy89 and poondog
[*]increase Torch power 20mA
[*]Dynamic management of dirty page writebacks
[*]IO: BFQv7r7/FIFO/SIO/FIOPS/ZEN/VR IO Schedulers
[*]Faux Sound Control 3.2
[*]KCAL v2 by @savoca
[*]USB forced fast charge
[*]Stereo call recording support by skvalex
[*]Powersuspend from Faux and yank555-lu *updated to 1.8 after r8*
[*]Kernel Compression: XZ
[*]psx2usb controller
[*]Use Android device as USB keyboard/mouse
[*]optimized ARM RWSEM algorithm.
[*]Ultra Kernel Samepage Merging {UKSM}
[*]FRandom
[*]Dynamic FSync Control
[*]Added Simple GPU Algorithm
[*]WQ_POWER_EFFICIENT for bettery battery life. Hello Battery!!
[*]ANY Kernel
[*]Kexec hardboot patch for Multirom support
[*]TCP: HTCP/HSTCP/HYBLA/VEGAS/SCALABLE/LP/VENO/YEAH/ILLINOIS/WESTWOOD
Optimizations
[*]Compiled Using UBER 5.0.1 SaberMod 4.8 Optimized toolchain for better performance | UBER 4.9 Toolchain after r4
[*]Added optimized ARM RWSEM algorithm.
[*]Disable add_random
[*]Pocketmode and deepsleep for dt2w/s2w
[*]Optimized VFP Module
[*]FIx integer-overflow in veno,vegas
[*]Add sysinterface for GENTLE_FAIR_SLEEPERS
[*]NOATIME and NODIRATIME as default
[*]New 99LMK script by @Pizza_Dox
[*]Nvidia Patches to enhance power efficiency.
[*]Sched optimizations
[*]Increase battery level check interval
[*]writeback: increase bdi_min_ratio to 5
[*]block: cfq: merge tweaked tunables.
[*]Wait just 1 second for other CPU to halt
[*]net: combat buffer bloat
[*]PM: Introduce suspend state PM_SUSPEND_FREEZE
[*]Disable -fconserve-stack on ARM v2
[*]Enable power efficient workqueues by default
[*]do not use msm_run_queue_stats
[*]enable/disable cpu-boost via sysfs
[*]softirq: reduce latencies
[*]Built with Ofast flags
[*]Force SELinux permissive
[*]LowMemoryKiller management of non killable processes
[*]Headset High Performance Mode
[*]Allow CPU-supported unaligned accesses
[*]Enable UNALIGNED_ACCESS
[*]enable ARCH_POWER
[*]lower swappiness
[*]vfp: remove double entries
[*]Disable disable crc check for 30% extra performance in IO
[*]Optimized SLUB memory allocator
[*]Optimize Sfck Compression
[*]set sched_mc_power_savings to 2 (moar powarrrrrrr! saving)
[*]readahead to 256
[*]Built with Graphite flags
[*] Enabled Pipe Flag
TO-Do List
IntelliMM-intelliminmax
New Govs and I/Os
Intelliplug 4.0
GPU OC and UC
* Recommended app for tweaking the kernel: FauxControl,Kernel Auditor or TricksterMod
Recommended settings :
Governor: Intelliactive
I/O Scheduler: Fiops or row
TCP Congestion : Westwood
GPU Governor : Simple Ondemand Or Msm-adreno-tz
Hotplug : Intelliplug ( Keep screen off frequency to 787 MHz )
Powersuspend : Hybrid
Simple GPU Algorithm : On
How DO I flash this?
Reboot to recovery.
Install zip from SD Card.
Choose the SpiritKernel-Rx-titan.zip
Insatll and Reboot.
Changelog:
Click Me
Downloads:
Basketbuild
Source:
Github(branch:spirit)
Wiki containing changelogs,settings and more
Antutu Score: http://forum.xda-developers.com/showpost.php?p=59736983&postcount=136
Credits goes to these SUPERHUMAN for Inspiration and support (In no specific order)
faux123
Cl3Kener
slukk
luca020400
savoca
Anas Karbila
hurtsky
pinkflozd
YoshiShaPow
Flashhhh
flar2
vigneshrajagopalan
And more
XDA:DevDB Information
Spirit kernel for titan, Kernel for the Moto G 2014
Contributors
DC07
Source Code: https://github.com/DC07/spirit_msm8226
Kernel Special Features: Powersuspend,Ultra KSM,FRandom,Faux Sound,LCD KCAL,DT2W/S2W,Fastcharge and More
Version Information
Status: Stable
Current Stable Version: r13
Stable Release Date: 2015-04-21
Created 2015-03-16
Last Updated 2015-04-21
F.A.Q. - Read this before complaining!
1. My phone exploded, HALP!
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Paste it on pastie.org and link it on your post. Logcats are useless for Kernel purposes, don't bother posting them.
2. This kernel works on Y or X rom?
A: Doesn't work with ROMs having different ramdisk or any derivates due to their irresponsibility of using a different ramdisk which needs patches that break stock rom users. Use a different rom and don't bother me.
3. OMG BETTARY SUCKZ, IT DEAD IN 45 MINUTAS, HALP!
A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
4. How do I flash this?
A: Reading the OP, theres a reason why I added instructions on it.
5. What is a data loss? Did I just had one?
A: Data loss is simply having the connection cut for X periods of time, usually few seconds. Grey bars means the device is not connected to Google services for some weird reason, but you'll still have internet connection.
6. OP is arrogant, I'm gonna call the Internet Police?
A: Deal with it.
Settings recommended by our users
metalrules321 said:
Heres what I use and it gives me exceptionally good battery life and perfomance (may differ for others) /using faux-clock app
1.CPU Hotplug
-Intelliplug (I use fauxclock, so cant find the msm hotplug)
-Touch boost on
-Screen off frequency 787 mhz
-Hysterisis value : 8
-Profile : Ecoconservative
-Threshold value 350
2.Thermal Manager
-Intellithermal
-Frequency Throttle temp; 70
-Core throttle temp: 65
3.GPU manager
-Governor: msm-adreno-tz
-simple gpu algorithm
-gpu clock:320
-Simple governor (laziness); 5
-Ramp Threshold: 5
4. IO scheduler
-ROW (for both emmc and sd)
-Read ahead :1024
-Entropy: off
5.Memory Manager
-Zram: Off
-All the other options on
- Swappines:80
-VFS cache pressure : 120
-Dirty ratio:20
-background ratio:5
6.Same page merge
-Intelli ksm enable
-Activation treshold :24
-Cycles per activation 3
-Pages to scan:400
-Scan delay interval :500
7.Battery Control
-Throttling - On
-Temperature threshold :45
-Throttle frequency:787
8.Miscellaneous
- Powe suspend mode: Userspace
-powesuspend: On
-Dynamic file sync: on
-TCP congestion control:Westwood
*Sorry for an awfully long post *:silly:
Click to expand...
Click to collapse
@DC07 wrong kernel tree xd
https://github.com/CyanogenMod/android_kernel_motorola_msm8226/tree/cm-12.0
luca020400 said:
@DC07 wrong kernel tree xd
https://github.com/CyanogenMod/android_kernel_motorola_msm8226/tree/cm-12.0
Click to expand...
Click to collapse
The kernel just works fine with the trees I'm using ATM.
DC07 said:
The kernel just works fine with the trees I'm using ATM.
Click to expand...
Click to collapse
But not in new trees
Now our cm12 uses this kernel and if you flash this one you will broke media ( cannot play/record videos )
Yeah... Thankssss
luca020400 said:
But not in new trees
Now our cm12 uses this kernel and if you flash this one you will broke media ( cannot play/record videos )
Click to expand...
Click to collapse
Oh,I'll rebase it in the next build then.
Thanks for pointing it.
Guys is media [video recording and playing] broken?
As said by luca.Just wanted to confirm if I need to change the base.
Maybe can anyone check on latest CM12 build.
DC07 said:
Guys is media [video recording and playing] broken?
As said by luca.Just wanted to confirm if I need to change the base.
Maybe can anyone check on latest CM12 build.
Click to expand...
Click to collapse
YEa I'm sure
When I tested lp kernel on kk media was broken
And new lp kernel is a way better
Eager to use it on latest Builds and requesting to add kexec support if possible
Sent from my XT1033{LP} using TAPATALK
DC07 said:
Guys is media [video recording and playing] broken?
As said by luca.Just wanted to confirm if I need to change the base.
Maybe can anyone check on latest CM12 build.
Click to expand...
Click to collapse
For me, sometimes it works, but then other times won't.
In blisspop video works for a day...then well i moved to stock 4.4.4 for some testing and optimisation on it btw i'm on xt1068
Hello Guys,
After working off to a new base fixed everything in the new build.
Get it https://s.basketbuild.com/devs/DC07/Spirit/titan
Steps and feature list are on the OP.
Enjoy!!
Help
Hello im a new moto g user and i flashed the latest cm12 nightly. I really want to flash this kernel but im afraid that it wil screw up my phone. I flashed franco and it screw me up. Should i do it? I have backup stockrom
MotoGUser69 said:
Hello im a new moto g user and i flashed the latest cm12 nightly. I really want to flash this kernel but im afraid that it wil screw up my phone. I flashed franco and it screw me up. Should i do it? I have backup stockrom
Click to expand...
Click to collapse
Normal moto g or second generation?
And there isnt even franco kernel for this device lol so ofc you screw up.
If you indeed own a moto g 2nd gen (titan) and your are running latest cm12 nightly it is safe to flash this kernel.
Anas Karbila said:
Normal moto g or second generation?
And there isnt even franco kernel for this device lol so ofc you screw up.
If you indeed own a moto g 2nd gen (titan) and your are running latest cm12 nightly it is safe to flash this kernel.
Click to expand...
Click to collapse
Second gen
What
Sent from my Moto G 2014 using XDA Free mobile app
I did not think the new governors nor Min Freq: 96000
Is there anyway to disable the cpu being clocked at 19000 whenever I touch the screen? It's a feature of CM12, however is there anyway to disable this? I tried putting off mpDecision through Faux123 but it still goes to 19000 even with intelliplug and the user defined option. Any help appreciated!
Thanks,
iG0tB00ts
MotoGUser69 said:
Second gen
Click to expand...
Click to collapse
How the hell you have a Moto G 2nd Gen and flashed Franco Kernel? Franco Kernel is for 1st Gen. lol man you need new eyes, even glasses don't help in this case.
Sent from my Moto G 2014 using XDA Free mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazySuperKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazySuperKernel over the kernel that came with your ROM!!)
Kernel tweaker app:
- CrazySuperKernel Adiutor (need download it from downloads)
Toolchain:
DF 4.9 Toolchain [latest update]
CPU:
- governors:
crazyactive(my governor:balance governor for great battery life and performance based on interactive)
interactive
impulse
ondemand
smartmax
zzmoove
ondemandplus
pegasusq
nightmare
conservative
lionheart
powersave
userspace
yankactive
smartmax_eps
intellidemand
intelliactive
- MSM Limiter
- input boost
- state notifier
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
zen
vr
fifo
TCP congestion controls:
cubic
bic
westwood
htcp
highspeed
hybla
reno
bic
hybla
vegas
lp
yeah
illinois
scalable
- tcp congestion changed to Westwood
GPU:
- governors:
msm-adreno-tz
simple_ondemand
powersave,performance
userspace
cpubw_hwmon
msm_cpufreq
- Adreno idler
- simple gpu algorithm
Thermal control:
- Intelli thermal v2
Hotplug:
- Disabled MP Decision hotplug
- Enabled Bricked Hotplug
- Prevent wakelock when ambiend display disabled(misc control tab)
Sound:
- Faux sound updated and fixed
- Slimbus overclock
More:
- Kernel runs with SELinux permissive by default
- init.d support
- insecure kernel (adb has root privileges)
- fast charge
- pvs level info
- Kcal v2
- Frandom support
- Disabled Arch Power
- CRC Check Disabled
- Gentle Fair Sleepers (Disabled by default)
- Enabled All Suspend and Idle Modes
- Power Suspend Mode/State
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Download Link CrazySuperKernel [AnyKernel]:https://www.androidfilehost.com/?w=files&flid=138590
Download Link CrazySuperKernelAdiutor[Updated]:https://www.androidfilehost.com/?w=files&flid=139961
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazySuperKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazySuperKernel !!!!
Credits
thx Showp1984
thx Faux123
thx Savoca
thx RenderBroken
thx Neobuddy
thx Myfluxi
thx FranciscoFranco
thx SultanXDA
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx yank555
thx apb_axel
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
Donators
red5pade
XDA:DevDB Information
CrazySuperKernel, Kernel for the OnePlus One
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazySuperKernel-CM14.1-OPO
Kernel Special Features: check the feature list
Version Information
Status: Stable
Created 2016-12-25
Last Updated 2016-12-25
FAQ
Recommended app : CrazySuperKernel Adiutor
changelogs
v1.0/24-12-16
- initial release
v2.0/27-12-16
- CrazySuperKernel Adiutor (included)
- Deleted Synapse
- added stable faux sound
- some anykernel fixes
v3.0/31-12-16
- added fast charge
- deleted included CSKAdiutor (need download it)
- many fixes
v4.0/02-01-17
- updated fast charge
- pvs level info
- some fixes
If u use zzmove governor disable all the hotplugs coz it use its own hotplug as anyone knows.
[Q]How i select profile from kernel tweaker app?
[A]You need to go in governor tunable-profile number and select the number of the profile from the list.
Zzmove profiles
1 ) Default -> will set governor defaults
2 )ybat -> Yank Battery -> a very good battery/performance balanced setting - DEV-NOTE: highly recommended!
3 )ybatext-> Yank Battery Extreme -> like yank battery but focus on battery saving
4 )zzbat-> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving - DEV-NOTE: might give some lags!
5 )zzbatp -> ZaneZam Battery Plus -> NEW! reworked faster battery setting - DEV-NOTE: recommended too!
6 )zzopt -> ZaneZam Optimized -> balanced setting with no focus in any direction - DEV-NOTE: relict from back in the days, even though some people still like it!
7 )zzmod -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online
8 )zzperf -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast - down scaling/hotplugging behaving
9 )zzinz-> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience!
10 )zzgame-> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay
reserve1
reserve2
More and more kernels
Thanks!
Support fast charge?
assassin0408 said:
Support fast charge?
Click to expand...
Click to collapse
I will add soon usb fast charge and maybe charge control.
Thanks and great job!
Bobbi lim said:
Thanks and great job!
Click to expand...
Click to collapse
Thx m8,new features coming soon.
Merry Christmas!!!!!
assassin0408 said:
Support fast charge?
Click to expand...
Click to collapse
U from galaxy s advance mate
pankspoo said:
U from galaxy s advance mate
Click to expand...
Click to collapse
Yes thats true.. S advance. How do you know me?
Hello, Merry Christmas, I installed this kernel but do not work 2 things:
1- installed the kernel, but when I open Synapse tells me: NO UCI DETECT
2-UKM installed 3.8.1, but the audio portion can not be configured, even if imposed different or custom profiles, the values remain the same, and the sound remains very low.
I apologize for my English, but I'm using a translator !!!
NeGriTa79 said:
Hello, Merry Christmas, I installed this kernel but do not work 2 things:
1- installed the kernel, but when I open Synapse tells me: NO UCI DETECT
2-UKM installed 3.8.1, but the audio portion can not be configured, even if imposed different or custom profiles, the values remain the same, and the sound remains very low.
I apologize for my English, but I'm using a translator !!!
Click to expand...
Click to collapse
The synapse after a reboot should work its created for this device with many new features,its not same with the old synapse.But after many problems from the synapse i will not continue it,the new builds will be include other kernel tweaker app.
CrazyGamerGR said:
The synapse after a reboot should work its created for this device with many new features,its not same with the old synapse.But after many problems from the synapse i will not continue it,the new builds will be include other kernel tweaker app.
Click to expand...
Click to collapse
I downloaded from Synapse PlayStore ... several times ... but it does not go ... to make it work I had to install UKM 3.8.1 ... Where can I find UKM updated for your kernel?
NeGriTa79 said:
I downloaded from Synapse PlayStore ... several times ... but it does not go ... to make it work I had to install UKM 3.8.1 ... Where can I find UKM updated for your kernel?
Click to expand...
Click to collapse
It is included,you just instal synapse app from playstore and it work,you use RR?
CrazyGamerGR said:
It is included,you just instal synapse app from playstore and it work,you use RR?
Click to expand...
Click to collapse
If I do not install UKM not start me Synapse. I mount the NuclearRom 7.1.1 Version 1.2.0 BETA
The audio is very low and you can not configure it nessn so ... I tried to install Faux Sound Control ... But it does not change anything!
NeGriTa79 said:
If I do not install UKM not start me Synapse. I mount the NuclearRom 7.1.1 Version 1.2.0 BETA
The audio is very low and you can not configure it nessn so ... I tried to install Faux Sound Control ... But it does not change anything!
Click to expand...
Click to collapse
Its modded faux sound,tomorrow i ll have my new kernel tweaker app ready to fix all these problems from the Synapse.
CrazyGamerGR said:
Its modded faux sound,tomorrow i ll have my new kernel tweaker app ready to fix all these problems from the Synapse.
Click to expand...
Click to collapse
Very Thanks
Inviato dal mio A0001 utilizzando Tapatalk
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazyAquaKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazyAquaKernel over the kernel that came with your ROM!!)
Toolchain:
UBERTC 4.9 Toolchain
CPU:
- governors:
crazyactive(my governor:balance governor for great battery life and performance based on interactive)
interactive
impulse
ondemand
smartmax
zzmoove
ondemandplus
pegasusq
nightmare
conservative
lionheart
powersave
userspace
yankactive
smartmax_eps
intellidemand
intelliactive
- MSM Limiter
- input boost
- state notifier
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
zen
vr
fifo
TCP congestion controls:
cubic
bic
westwood
htcp
highspeed
hybla
reno
bic
hybla
vegas
lp
yeah
illinois
scalable
- tcp congestion changed to Westwood
GPU:
- governors:
msm-adreno-tz
simple_ondemand
powersave,performance
userspace
cpubw_hwmon
msm_cpufreq
- Adreno idler
- simple gpu algorithm
Thermal control:
- Intelli thermal v2
Hotplug:
- Disabled MP Decision hotplug
- Enabled Bricked Hotplug
- Prevent wakelock when ambiend display disabled(misc control tab)
Sound:
- Faux sound
More:
- Kernel runs with SELinux permissive by default
- init.d support
- insecure kernel (adb has root privileges)
- fast charge
- pvs level info
- Kcal v2
- Frandom support
- Disabled Arch Power
- CRC Check Disabled
- Gentle Fair Sleepers (Disabled by default)
- Enabled All Suspend and Idle Modes
- Power Suspend Mode/State
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Download Link CrazyAquaKernel [AnyKernel]:https://www.androidfilehost.com/?fid=817550096634793333
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazyAquaKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazyAquaKernel !!!!
Credits
thx Showp1984
thx Faux123
thx Savoca
thx RenderBroken
thx Neobuddy
thx Myfluxi
thx FranciscoFranco
thx SultanXDA
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx yank555
thx apb_axel
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazyAquaKernel, Kernel for the OnePlus One
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazyAquaKernel-opo-los
Kernel Special Features:
Version Information
Status: Beta
Created 2017-08-17
Last Updated 2017-08-17
FAQ
Recommended app : Kernel Adiutor
changelogs
v1.0/17-08-17
- initial release
If u use zzmove governor disable all the hotplugs coz it use its own hotplug as anyone knows.
[Q]How i select profile from kernel tweaker app?
[A]You need to go in governor tunable-profile number and select the number of the profile from the list.
Zzmove profiles
1 ) Default -> will set governor defaults
2 )ybat -> Yank Battery -> a very good battery/performance balanced setting - DEV-NOTE: highly recommended!
3 )ybatext-> Yank Battery Extreme -> like yank battery but focus on battery saving
4 )zzbat-> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving - DEV-NOTE: might give some lags!
5 )zzbatp -> ZaneZam Battery Plus -> NEW! reworked faster battery setting - DEV-NOTE: recommended too!
6 )zzopt -> ZaneZam Optimized -> balanced setting with no focus in any direction - DEV-NOTE: relict from back in the days, even though some people still like it!
7 )zzmod -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online
8 )zzperf -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast - down scaling/hotplugging behaving
9 )zzinz-> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience!
10 )zzgame-> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay
reserve1
reserve2
You're back! Thanks for still contributing to bacon.
Mr.Ak said:
You're back! Thanks for still contributing to bacon.
Click to expand...
Click to collapse
I promised it where i will come back
Downloading
Minions_Army said:
Downloading
Click to expand...
Click to collapse
Cool^^
CrazyGamerGR said:
Cool^^
Click to expand...
Click to collapse
Performance is good
Minions_Army said:
Performance is good
Click to expand...
Click to collapse
Thx for feedback m8
Will it work with Sultan's N ROM ?
tamboli007 said:
Will it work with Sultan's N ROM ?
Click to expand...
Click to collapse
You can try m8 coz he use caf source but los work too
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
You can try m8 coz he use caf source but los work too
Click to expand...
Click to collapse
It's working fine:good:. Thanks
Edit :- camera doesn't work .
tamboli007 said:
It's working fine:good:. Thanks
Edit :- camera doesn't work .
Click to expand...
Click to collapse
It is rom problem coz i didn't added something for camera
He make changes for camera coz i used his rom on my op3,i need to do some changes to work correct with caf roms too
Sent from my iPhone using Tapatalk Pro
I hope u plan to support custom blobs too. OOS v2 (sultan) or OOS v3 instead of CM blobs
MrxSiN said:
I hope u plan to support custom blobs too. OOS v2 (sultan) or OOS v3 instead of CM blobs
Click to expand...
Click to collapse
Maybe soon m8
Sent from my iPhone using Tapatalk Pro
downloading.., btw., kernel auditor should be used to do the changes..?
murti52 said:
downloading.., btw., kernel auditor should be used to do the changes..?
Click to expand...
Click to collapse
Yeh i recommend it
this one won't work on this rom if it's AOSP?
https://forum.xda-developers.com/oneplus-one/development/rom-aospextended-rom-v3-1-t3547628
Yes, I'm a noob ......I can only flash rom's
I'm lost with all these versions: CAF LOS,CM, AOSP ..... special Camera HALs ....can someone explain what works on what ?
the AOSP rom is great but battery charging is superslow and cpu undervolting would also be great
I'm looking to get the best battery life rom without choppy interface
I never game on my OPO , just call,txt and internet.
any Rom /Kernel suggestions (or gouvernor settings)
DISCLAIMER
I will not be held responsible for anything that happens to your device after flashing this kernel. If you don't know how to bring your dead device back to life please don't make any modifications and stay with stock MIUI. This is only meant for advanced users.
Features :
-Compiled with UBER 6.4.1 TC-
-CPU/GPU O.C[for all variants]-
-Savoca KCAL-
-Blu_active Cpu Gov-
-FIOPS I/O-
-Chacha20 CRNG-
-Adreno Idler-
-Sound Contol-
-Slimbus O.C for better sound quality-
-Vibration Control Intensity-
-ExFat/NTFS Support-
-Toggleable Software CRC-
-TCP congestion Algorithms-
-Misc Changes-
-Spectrum support-
Installation:
-Boot Into Recovery-
-Flash Kernel-
-Wipe Cache and Dalvik (Optional)-
-Reboot!-
Download :
https://www.mediafire.com/folder/5yu4ri9bumpts/Gemini
MiUi-Gemini is for MiUi 9 ( or MiUi 9 based roms )
HMP-Gemini is for LOS or other Los based roms.( w/o EAS support )
EAS-Gemini is for EAS supported roms.
EAS-voxpopuli-Gemini is for EAS supported roms which using Vox Populi Power HAL.
* users should use spectrum to load the kernel settings ( balance profile ) on every boot. *
--------------------------------------------------------------------------------------------------------------------------------------
Credits:
bgcngm-franciscofranco-Sultanxda-flar2-eng.stk-The Flash-frap129-osm0sis
--------------------------------------------------------------------------------------------------------------------------------------
Contributors:
MEGAX91
Source :
https://github.com/GUYVER91/Capricorn
don't dirty Flash my kernel on any other custom kernel , if you are coming from another custom kernel , first flash your Rom's stock kernel through Fastboot , then Flash my kernel.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
these are my kernel settings , you can use them in case you can't use spectrum.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
never post problems without full details of what setup you are using, it's not possible to help that way.
Provide me some logs:
- ADB logcat dump
- /sys/fs/pstore contents
- dmesg dump
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Only use EAS builds alongside EAS supported roms..
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
if you think your battery life is not good enough , use betterbatterystats and find the battery drain causes..
Changelog :
v3.0 :
[HMP Builds] :
-removed OC frequencies ( standard SD820 frequencies are still available for 32GB variant )
-updated Wlan Driver
-updated blu_active CPU Gov
-updated sound control
-updated thermal driver
-updated cpuidle driver
-updated F2FS driver
-memory management improvements
-upstream updates
-bug fixes
[EAS Builds] :
-removed OC frequencies ( standard SD820 frequencies are still available for 32GB variant )
-updated Wlan Driver
-updated sound control
-updated thermal driver
-updated cpuidle driver
-updated F2FS driver
-memory management improvements
-upstream updates
-bug fixes
v2.0 :
[HMP Builds] :
-Merge Last CAF branch LA.UM.5.5.r1-05800-8x96.0
-Updated Wlan Driver
-added hyperx CPU Gov
-added Tripndroid I/O Scheduler
-updated blu_active CPU Gov
-removed qpnp-fg family wakeup sources
-Blocked lot of kernel wakelocks
-updated EXT4 driver
-lot of upstream changes
-Bug Fixes
[EAS Builds] :
-Merge Last CAF branch LA.UM.5.5.r1-05800-8x96.0
-Updated Wlan Driver
-added Tripndroid I/O Scheduler
-added cpu-boost (optimized for EAS)
-removed qpnp-fg family wakeup sources
-Blocked lot of kernel wakelocks
-updated EXT4 driver
-lot of upstream changes
-Bug Fixes
v1.0 :
initial release
a bout EAS :
EAS stands for Energy Aware Scheduling , where the whole governor settings + HMP Settings are replaced by one system relying on "scheduler hints" from specifically modded low-level files including specially modded libs and framework patches.EAS aims to achieve better battery through lowering the product of V * I by altering the voltage along with the frequency dynamically based on loads calculation and the frequency used and many other variables.
EAS will set the core > Frequency > voltage per task. If the scheduler decided that a task needs a higher freq then it supplies that before the task is placed on a core.
Also the great thing about EAS (When tuned and setup properly) is that it is setup to not overshoot and overpower task workload.
Unlike our standard governor like interactive that does sampling and cpu-boost. These both can overshoot the performance needs pf the current workload thus leading to energy loss.
in short : EAS is all about setting the stune groups and the cpusets and using a sched -or schedutil- governor. There has to be an energy model for the SoC so that there is proper energy costs calculation made
*Energy models are the voltage/frequency*
Nice to see this kernel for mi5.
It Should work with Aosp (extended)? It uses schedutil governor by default.
And.does.it have oc.for 32gb version?
RootNightmareX said:
Nice to see this kernel for mi5.
It Should work with Aosp (extended)? It uses schedutil governor by default.
And.does.it have oc.for 32gb version?
Click to expand...
Click to collapse
Reeead the OP! ^^
Second item under features: "CPU/GPU OC [for all variants]"
RootNightmareX said:
Nice to see this kernel for mi5.
It Should work with Aosp (extended)? It uses schedutil governor by default.
And.does.it have oc.for 32gb version?
Click to expand...
Click to collapse
yes , it works on AEX. ( on EAS build , schedutil is the default Gov )
OC is available for all variants.
Phil_Smith said:
Reeead the OP! ^^
Second item under features: "CPU/GPU OC [for all variants]"
Click to expand...
Click to collapse
Preeety sure it wanst there when i red it 1st time
RootNightmareX said:
Preeety sure it wanst there when i red it 1st time
Click to expand...
Click to collapse
Okay, I see. Sorry then.
Waow new kernel again. Great work, thank you..
Min 1,2ghz
Max 1,1ghz freq.
Its normal? Any recommaned freq?
Nice to see your kernel on Gemini! I used to follow it on Kenzo, will try it soon
RootNightmareX said:
Min 1,2ghz
Max 1,1ghz freq.
Its normal? Any recommaned freq?
Click to expand...
Click to collapse
No! min freq is 307200MHz! use spectrum and choose balance profile.
MEGAX91 said:
No! min freq is 307200MHz! use spectrum and choose balance profile.
Click to expand...
Click to collapse
The hmp version also got EAS? Sorry if it's a low question.
Eas works good with Pure Fusion, spectrum balanced mode so far so good.
masterlo3 said:
The hmp version also got EAS? Sorry if it's a low question.
Click to expand...
Click to collapse
No.
MEGAX91 said:
No.
Click to expand...
Click to collapse
Lol thanks. I figured. Downloaded and testing on JDCT AOSP
Thanks for miui kernel. I've used your kernel before on kenzo and it works fine. I hope it works fine too on gemini. Can you add flar2 wake gesture support on miui and los? Please keep update miui kernel. Thank you
can it work on rr roms？
Sheldon Lv said:
can it work on rr roms？
Click to expand...
Click to collapse
Sure it will
=BUTTERFLY KERNEL=
Your warranty is now void!
We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you
Features:
Pie base: CAF & Prima Tag by LA.UM.7.6.r1-04500-89xx.0
Oreo base: CAF & Prima Tag by LA.UM.6.6.r1-11000-89xx.0
Legacy base: not updated pure sources from MiCode github
(prima tag LA.UM.7.6.r1-05500-89xx / LA.UM.6.6.r1-11300-89xx.0)
• KCAL color control
• Vibration intensity control
• Sound gain control
• Audio codec quality improved
• exFAT Support
• NTFS support
• F2FS support
• SquahFS support
• CIFS/SMB support
• Added CPU Hotplug (default disabled)
• Set lz4 for better zram work
• Boeffla wakelock blocker
• Added defaults rules for Boeffla wakelock blocker
• Disable vendor verify and set no verity
• CRC32: disable by default & enable toogle (average 30% I/O performance profit)
• Few patches from Franco kernel (disabled a lot of debugging stuff)
• Fsync: on/off support
• Battery deep optimisation: undervolting & additional tweaks
• Added Adreno Real Idler (supported turning it on/off)
• Improved interactive governor (patch from Franco kernel)
• Improved CPU boost, default is disabled (patch from Franco kernel)
• Improved conservative governor (patch from Franco kernel)
• I/O schedulers: noop, deadline, bfq, cfq (default), sio, fiops, maple, tripndroid, zen, anxiety, sioplus, fifo, v(r)
• Added CPU governors: darkness, zzmoove, relax, impulse, electron, nonconservative, lionheart, clarity, blu_active, yankactive, intelliactive, conservativex, ondemandx, interactivex, bioshock, darknessv5, alucard, smartmax_eps, pegasusq, lionfish, hyper, despair, barry_allen, xperience, alessa, chill, ondemandplus, ironactive, culvitation, tripndroid
• Added GPU governors: guardian, balanced, msm-adreno-plus
• TCP congestion algorithms: cubic, reno, westwood (default)
• Installer include fix for Wi-Fi SELinux permission
• Kernel installer also support custom ROMs
• GCam focus fix (thanks @teftel1608 and @33bca)
• GPU: clocks table reworked (lags free, performance grew). OC max gpu freq now is 725MHz
• Added WireGuard 0.0.20190601
• Fix for goodix-fp gestures on stock (thanks to @artyom5613 & @Broomber)
• Also in the v4 installer included fix fpc-fp gestures for the customs rom
now gestures for both fingerprints is are:
* swipe2right - paste text
* others like in rom's setting
(if you not like this - change it in the /system/usr/keylayout/uinput-*.kl)
• Memory & battery life optimization due config settings for kernel
• Added a block to wakelock from wifi
• I/O optimization
• Hide unlocked bootloader state (for apps like bank clients etc)
• Patches from Franco "mido" kernel for battery life improvement
• Added gpu Adreno simple algorithm (beast!!)
• Found a reason for which the CPU could for a long time not to raise the frequency to the maximum, it's all in the file /vendor/etc/thermal-engine.conf
See samples how to improve situation
• Compiled with GCC 9.1.0, which gave an increase in performance and speed of the kernel
• Reworked undervolting, battery lives even longer
• Added voltage control
• Maximum CPU frequency is now 2.4GHz
• EUOC version has a maximum GPU frequency of 750MHz
• added support for display status for CPU Hotplug & some schedulers
• all schedulers that have display status support:
alucard, chill, clarity, cultivation, darkness, electron, impulse, intelliactive, ironactive, nightmare, relaxed, anxiety-iosched and maple-iosched
• added drivers for few USB-Ethernet adapters
• added nightmare and dancedance CPU governors
• updated version with 2.2GHz overclocking
• removed the patch for hiding the bootloader state (there are more problems than good with it)
• new settings for a smooth interface in installer (applied for GSI only)
- DT2W fix for fts_ts [default disabled] (thanks @33bca) * tested on customs and GSIs. for latest maybe need to enable "Handwave gesture" in "Phh Treble Settings" > "Doze features" * #TODO
- Installer include Magisk preserve #TODO
<< download Pie v5.5 || download Pie v4.4 >>
<< download Oreo v5.5 || download Oreo v4.4 >>
undervolted (U) lower voltage for decrease overheat. also incredible battery saving
overclocked (OC) CPU max frequency is 2.4GHz, GPU max frequency is 725MHz
extra-overclocked (E) GPU max frequency is 750MHz (if you will face with graphical glitches - don't use it!)
Installations:
Backup boot.img, /system/lib/modules, /system/usr/keylayout and /vendor/lib/modules folders, /vendor/bin/init.qcom.post_boot.sh file if you want to go back
Flash Zip file with any TWRP recovery, wipe Dalvik cache, reboot and enjoy ^_^
Notice: if you have Magisk with modules installed maybe you'll get bootloop.
If you have Magisk don't need reinstall it after kernel because installer will save Magisk #TODO
Right way: if you have Magisk and modules - deinstall all. Then flash stock boot.img, then custom kernel, then other stuff like TWRP and Magisk.
Enough just dirty flashing kernel and then Magisk if you need it. All yours Magisk modules will preserved.
Issues:
- DT2W not work for fts_ts touchscreen
- tell me if find
XDA:DevDB Information
Butterfly kernel for Xiaomi Mi A2 Lite "daisy"
Contributors:
eremitein
Source Code:
https://github.com/eremitein/xiaomi_kernel_msm8953_daisy_butterfly
CREDITS:
All people, who made good code for this platform
Version Information
Status: Stable/Experimental
Release Date: 2019-04-15 (UTC +0)
Created: 2019-04-07
Last Updated: 2019-08-08
.
=VARIOUS POWER PROFILES=
[BATTERY DEEP BACKUP]
CPU governor: conservative
CPU max freq: 1804 MHz
GPU governor: msm-adreno-tz or guardian
Adreno idler: on
Tune Boeffla Wakelock Blocker: read this manual
CPU Hotplug: see attached screenshot
# Give ~10 minutes SOT per 1% battery while web browsing #
[NORMAL MODE]
CPU governor: ondemand / interactive
CPU max freq: set highest
GPU governor: msm-adreno-tz or balanced if lagzzs)
Adreno idler: on
CPU Hotplug: off
# Give ~8 minutes SOT per 1% battery while web browsing #
[PERFORMANCE MODE]
CPU governor: intelliactive, blue_active or nonconservative
CPU max freq: set highest
GPU governor: performance or msm-adreno-plus
Adreno idler: on
CPU boost: on
CPU boost freq: set to 1.84, 2.0 or 2.2GHz
CPU Hotplug: off
# Give ~5 minutes SOT per 1% battery while web browsing #
.
I will not help users if they are:
- using Magisk and moreover they installed modules;
- made any kernel settings (selected exotic governors, turned on hotplug and etc.);
- using option "Disable HW overlays";
- not sure that the same problems were not on the standard kernel
- not follow installation guide
All OC versions is always have CPU 2.2GHz
if not for you, then this is maybe if:
- you SoC/voltageregulator/phone doesn't support overclocking
- your device overheated due high outside temp or high load
- you system set restrictions to overclocking
.
Now im using CAF kernel with stock rom i want to flash butterfly what should i do delete CAF then install it??and for magisk delete all modul ?
hendri88 said:
Now im using CAF kernel with stock rom i want to flash butterfly what should i do delete CAF then install it??and for magisk delete all modul ?
Click to expand...
Click to collapse
yes, thats right
you may try dirty install but this is not a guarantee what system boot due to magisk specific
best way is remove all modules from magisk, remove magisk via flashing stock kernel and then boot to twrp and install butterfly
eremitein said:
yes, thats right
you may try dirty install but this is not a guarantee what system boot due to magisk specific
best way is remove all modules from magisk, remove magisk via flashing stock kernel and then boot to twrp and install butterfly
Click to expand...
Click to collapse
Ok i will try it thx bro
added power modes samples
https://forum.xda-developers.com/showpost.php?p=79288538&postcount=2
May I ask if this kernel could be modified so we can overclock? How exactly do we need to go about and do the modifications to the PLL tables? It'd be great if you could help out and make a tutorial or something.
Zewyni said:
May I ask if this kernel could be modified so we can overclock? How exactly do we need to go about and do the modifications to the PLL tables? It'd be great if you could help out and make a tutorial or something.
Click to expand...
Click to collapse
no, this build haven't overclock feature
Kernel updated (download v2)
Changelog v2:
Pie CAF & Prima updated to LA.UM.7.6.r1-04500-89xx.0
Improved interactive CPU governor (patch from Franco kernel)
Improved CPU boost and enable it (patch from Franco kernel)
Reworked conservative and nonconservative CPU governors
Reworked guardian, balanced and msm-adreno-plus GPU governors
Kernel installer now also support custom ROMs
Also have some changes in Power profiles
The touch sensetivity is somehow better with this kernel but I really miss dt2w... I'll be testing it for the week, hope you can fix dt2w! Thanks for your work on our device!
Eddie_53 said:
The touch sensetivity is somehow better with this kernel but I really miss dt2w... I'll be testing it for the week, hope you can fix dt2w! Thanks for your work on our device!
Click to expand...
Click to collapse
dt2w not supporting due missing stuff in official Xiaomi kernel sources
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/issues/1044
I can confirm that touch sensitivity is better on this Kernel. Gcam also runs smoother!
ExFAT support doesn't seem to be working though. I've tried to read an SD Card ExFAT formatted and it didn't work (corrupt error message).
eremitein said:
=VARIOUS POWER PROFILES=
[BATTERY DEEP BACKUP]
CPU governor: conservative
CPU max freq: 1689 MHz
GPU governor: guardian or msm-adreno-tz
Adreno idler: on
Tune Boeffla Wakelock Blocker:read this manual
CPU Hotplug: see attached screenshot
# Give 10-12 minutes SOT per 1% battery while web browsing #
[NORMAL MODE]
CPU governor: ondemand / interactive
CPU max freq: 2016 MHz
GPU governor: msm-adreno-tz or balanced if lagzzs)
Adreno idler: on
CPU Hotplug: off
# Give ~6 minutes SOT per 1% battery while web browsing #
[PERFORMANCE MODE]
CPU governor: nonconservative
CPU max freq: 2016 MHz
GPU governor: performance or msm-adreno-plus
Adreno idler: off
CPU Hotplug: off
# Give 4-5 minutes SOT per 1% battery while web browsing #
.
Click to expand...
Click to collapse
How to switch from one profile to another? I have kernel adiutor installed but there is no profile I the kernel section to select. Thanks to everyone answer and to the Dev for his work. Sorry for my English
Kr47os said:
How to switch from one profile to another? I have kernel adiutor installed but there is no profile I the kernel section to select. Thanks to everyone answer and to the Dev for his work. Sorry for my English
Click to expand...
Click to collapse
you may create various profiles in Kernel Aduitor
Tools > Profile
and which rom you using?
eremitein said:
you may create various profiles in Kernel Aduitor
Tools > Profile
and which rom you using?
Click to expand...
Click to collapse
I'm using stock ROM Pie 10.0.4 update version.
Kernel updates (see topic)
Changelog v2.99:
Added new builds:
- Oreo base CAF & Prima Tag by LA.UM.6.6.r1-11000-89xx.0
- Legacy base (not updated pure sources from MiCode github)
- Installer totally fixed for support wifi on custom roms
Oreo base is only for oreo vendors (9.6.x.0 versions)!!!
Why i built this and legacy variants?)
For compatibility. Because some people still using oreo stock or 8.1 vendor with GSI
BJumperBR said:
I can confirm that touch sensitivity is better on this Kernel. Gcam also runs smoother!
ExFAT support doesn't seem to be working though. I've tried to read an SD Card ExFAT formatted and it didn't work (corrupt error message).
Click to expand...
Click to collapse
for clean testing exFAT you need should be sure what ROM have support this FS
if with other kernel on your rom exfat work then, yeahh, something wrong with my kernel exfat
thanks for feedback)
eremitein said:
for clean testing exFAT you need should be sure what ROM have support this FS
if with other kernel on your rom exfat work then, yeahh, something wrong with my kernel exfat
thanks for feedback)
Click to expand...
Click to collapse
I'm on Stock ROM 10.0.4.0.
So, no exDAT support, right?
I am undecided whether to stay in oreo with this kernel or pie always switch to this kernel.
It is wrong to ask, instead of trying, but I don't have much time to test
No one with any feedback on the battery and stability?
(Noob question, what is it the difference of legacy kernel? )