=BUTTERFLY KERNEL=
Your warranty is now void!
We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you
Features:
Pie base: CAF & Prima Tag by LA.UM.7.6.r1-04500-89xx.0
Oreo base: CAF & Prima Tag by LA.UM.6.6.r1-11000-89xx.0
Legacy base: not updated pure sources from MiCode github
(prima tag LA.UM.7.6.r1-05500-89xx / LA.UM.6.6.r1-11300-89xx.0)
• KCAL color control
• Vibration intensity control
• Sound gain control
• Audio codec quality improved
• exFAT Support
• NTFS support
• F2FS support
• SquahFS support
• CIFS/SMB support
• Added CPU Hotplug (default disabled)
• Set lz4 for better zram work
• Boeffla wakelock blocker
• Added defaults rules for Boeffla wakelock blocker
• Disable vendor verify and set no verity
• CRC32: disable by default & enable toogle (average 30% I/O performance profit)
• Few patches from Franco kernel (disabled a lot of debugging stuff)
• Fsync: on/off support
• Battery deep optimisation: undervolting & additional tweaks
• Added Adreno Real Idler (supported turning it on/off)
• Improved interactive governor (patch from Franco kernel)
• Improved CPU boost, default is disabled (patch from Franco kernel)
• Improved conservative governor (patch from Franco kernel)
• I/O schedulers: noop, deadline, bfq, cfq (default), sio, fiops, maple, tripndroid, zen, anxiety, sioplus, fifo, v(r)
• Added CPU governors: darkness, zzmoove, relax, impulse, electron, nonconservative, lionheart, clarity, blu_active, yankactive, intelliactive, conservativex, ondemandx, interactivex, bioshock, darknessv5, alucard, smartmax_eps, pegasusq, lionfish, hyper, despair, barry_allen, xperience, alessa, chill, ondemandplus, ironactive, culvitation, tripndroid
• Added GPU governors: guardian, balanced, msm-adreno-plus
• TCP congestion algorithms: cubic, reno, westwood (default)
• Installer include fix for Wi-Fi SELinux permission
• Kernel installer also support custom ROMs
• GCam focus fix (thanks @teftel1608 and @33bca)
• GPU: clocks table reworked (lags free, performance grew). OC max gpu freq now is 725MHz
• Added WireGuard 0.0.20190601
• Fix for goodix-fp gestures on stock (thanks to @artyom5613 & @Broomber)
• Also in the v4 installer included fix fpc-fp gestures for the customs rom
now gestures for both fingerprints is are:
* swipe2right - paste text
* others like in rom's setting
(if you not like this - change it in the /system/usr/keylayout/uinput-*.kl)
• Memory & battery life optimization due config settings for kernel
• Added a block to wakelock from wifi
• I/O optimization
• Hide unlocked bootloader state (for apps like bank clients etc)
• Patches from Franco "mido" kernel for battery life improvement
• Added gpu Adreno simple algorithm (beast!!)
• Found a reason for which the CPU could for a long time not to raise the frequency to the maximum, it's all in the file /vendor/etc/thermal-engine.conf
See samples how to improve situation
• Compiled with GCC 9.1.0, which gave an increase in performance and speed of the kernel
• Reworked undervolting, battery lives even longer
• Added voltage control
• Maximum CPU frequency is now 2.4GHz
• EUOC version has a maximum GPU frequency of 750MHz
• added support for display status for CPU Hotplug & some schedulers
• all schedulers that have display status support:
alucard, chill, clarity, cultivation, darkness, electron, impulse, intelliactive, ironactive, nightmare, relaxed, anxiety-iosched and maple-iosched
• added drivers for few USB-Ethernet adapters
• added nightmare and dancedance CPU governors
• updated version with 2.2GHz overclocking
• removed the patch for hiding the bootloader state (there are more problems than good with it)
• new settings for a smooth interface in installer (applied for GSI only)
- DT2W fix for fts_ts [default disabled] (thanks @33bca) * tested on customs and GSIs. for latest maybe need to enable "Handwave gesture" in "Phh Treble Settings" > "Doze features" * #TODO
- Installer include Magisk preserve #TODO
<< download Pie v5.5 || download Pie v4.4 >>
<< download Oreo v5.5 || download Oreo v4.4 >>
undervolted (U) lower voltage for decrease overheat. also incredible battery saving
overclocked (OC) CPU max frequency is 2.4GHz, GPU max frequency is 725MHz
extra-overclocked (E) GPU max frequency is 750MHz (if you will face with graphical glitches - don't use it!)
Installations:
Backup boot.img, /system/lib/modules, /system/usr/keylayout and /vendor/lib/modules folders, /vendor/bin/init.qcom.post_boot.sh file if you want to go back
Flash Zip file with any TWRP recovery, wipe Dalvik cache, reboot and enjoy ^_^
Notice: if you have Magisk with modules installed maybe you'll get bootloop.
If you have Magisk don't need reinstall it after kernel because installer will save Magisk #TODO
Right way: if you have Magisk and modules - deinstall all. Then flash stock boot.img, then custom kernel, then other stuff like TWRP and Magisk.
Enough just dirty flashing kernel and then Magisk if you need it. All yours Magisk modules will preserved.
Issues:
- DT2W not work for fts_ts touchscreen
- tell me if find
XDA:DevDB Information
Butterfly kernel for Xiaomi Mi A2 Lite "daisy"
Contributors:
eremitein
Source Code:
https://github.com/eremitein/xiaomi_kernel_msm8953_daisy_butterfly
CREDITS:
All people, who made good code for this platform
Version Information
Status: Stable/Experimental
Release Date: 2019-04-15 (UTC +0)
Created: 2019-04-07
Last Updated: 2019-08-08
.
=VARIOUS POWER PROFILES=
[BATTERY DEEP BACKUP]
CPU governor: conservative
CPU max freq: 1804 MHz
GPU governor: msm-adreno-tz or guardian
Adreno idler: on
Tune Boeffla Wakelock Blocker: read this manual
CPU Hotplug: see attached screenshot
# Give ~10 minutes SOT per 1% battery while web browsing #
[NORMAL MODE]
CPU governor: ondemand / interactive
CPU max freq: set highest
GPU governor: msm-adreno-tz or balanced if lagzzs)
Adreno idler: on
CPU Hotplug: off
# Give ~8 minutes SOT per 1% battery while web browsing #
[PERFORMANCE MODE]
CPU governor: intelliactive, blue_active or nonconservative
CPU max freq: set highest
GPU governor: performance or msm-adreno-plus
Adreno idler: on
CPU boost: on
CPU boost freq: set to 1.84, 2.0 or 2.2GHz
CPU Hotplug: off
# Give ~5 minutes SOT per 1% battery while web browsing #
.
I will not help users if they are:
- using Magisk and moreover they installed modules;
- made any kernel settings (selected exotic governors, turned on hotplug and etc.);
- using option "Disable HW overlays";
- not sure that the same problems were not on the standard kernel
- not follow installation guide
All OC versions is always have CPU 2.2GHz
if not for you, then this is maybe if:
- you SoC/voltageregulator/phone doesn't support overclocking
- your device overheated due high outside temp or high load
- you system set restrictions to overclocking
.
Now im using CAF kernel with stock rom i want to flash butterfly what should i do delete CAF then install it??and for magisk delete all modul ?
hendri88 said:
Now im using CAF kernel with stock rom i want to flash butterfly what should i do delete CAF then install it??and for magisk delete all modul ?
Click to expand...
Click to collapse
yes, thats right
you may try dirty install but this is not a guarantee what system boot due to magisk specific
best way is remove all modules from magisk, remove magisk via flashing stock kernel and then boot to twrp and install butterfly
eremitein said:
yes, thats right
you may try dirty install but this is not a guarantee what system boot due to magisk specific
best way is remove all modules from magisk, remove magisk via flashing stock kernel and then boot to twrp and install butterfly
Click to expand...
Click to collapse
Ok i will try it thx bro
added power modes samples
https://forum.xda-developers.com/showpost.php?p=79288538&postcount=2
May I ask if this kernel could be modified so we can overclock? How exactly do we need to go about and do the modifications to the PLL tables? It'd be great if you could help out and make a tutorial or something.
Zewyni said:
May I ask if this kernel could be modified so we can overclock? How exactly do we need to go about and do the modifications to the PLL tables? It'd be great if you could help out and make a tutorial or something.
Click to expand...
Click to collapse
no, this build haven't overclock feature
Kernel updated (download v2)
Changelog v2:
Pie CAF & Prima updated to LA.UM.7.6.r1-04500-89xx.0
Improved interactive CPU governor (patch from Franco kernel)
Improved CPU boost and enable it (patch from Franco kernel)
Reworked conservative and nonconservative CPU governors
Reworked guardian, balanced and msm-adreno-plus GPU governors
Kernel installer now also support custom ROMs
Also have some changes in Power profiles
The touch sensetivity is somehow better with this kernel but I really miss dt2w... I'll be testing it for the week, hope you can fix dt2w! Thanks for your work on our device!
Eddie_53 said:
The touch sensetivity is somehow better with this kernel but I really miss dt2w... I'll be testing it for the week, hope you can fix dt2w! Thanks for your work on our device!
Click to expand...
Click to collapse
dt2w not supporting due missing stuff in official Xiaomi kernel sources
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/issues/1044
I can confirm that touch sensitivity is better on this Kernel. Gcam also runs smoother!
ExFAT support doesn't seem to be working though. I've tried to read an SD Card ExFAT formatted and it didn't work (corrupt error message).
eremitein said:
=VARIOUS POWER PROFILES=
[BATTERY DEEP BACKUP]
CPU governor: conservative
CPU max freq: 1689 MHz
GPU governor: guardian or msm-adreno-tz
Adreno idler: on
Tune Boeffla Wakelock Blocker:read this manual
CPU Hotplug: see attached screenshot
# Give 10-12 minutes SOT per 1% battery while web browsing #
[NORMAL MODE]
CPU governor: ondemand / interactive
CPU max freq: 2016 MHz
GPU governor: msm-adreno-tz or balanced if lagzzs)
Adreno idler: on
CPU Hotplug: off
# Give ~6 minutes SOT per 1% battery while web browsing #
[PERFORMANCE MODE]
CPU governor: nonconservative
CPU max freq: 2016 MHz
GPU governor: performance or msm-adreno-plus
Adreno idler: off
CPU Hotplug: off
# Give 4-5 minutes SOT per 1% battery while web browsing #
.
Click to expand...
Click to collapse
How to switch from one profile to another? I have kernel adiutor installed but there is no profile I the kernel section to select. Thanks to everyone answer and to the Dev for his work. Sorry for my English
Kr47os said:
How to switch from one profile to another? I have kernel adiutor installed but there is no profile I the kernel section to select. Thanks to everyone answer and to the Dev for his work. Sorry for my English
Click to expand...
Click to collapse
you may create various profiles in Kernel Aduitor
Tools > Profile
and which rom you using?
eremitein said:
you may create various profiles in Kernel Aduitor
Tools > Profile
and which rom you using?
Click to expand...
Click to collapse
I'm using stock ROM Pie 10.0.4 update version.
Kernel updates (see topic)
Changelog v2.99:
Added new builds:
- Oreo base CAF & Prima Tag by LA.UM.6.6.r1-11000-89xx.0
- Legacy base (not updated pure sources from MiCode github)
- Installer totally fixed for support wifi on custom roms
Oreo base is only for oreo vendors (9.6.x.0 versions)!!!
Why i built this and legacy variants?)
For compatibility. Because some people still using oreo stock or 8.1 vendor with GSI
BJumperBR said:
I can confirm that touch sensitivity is better on this Kernel. Gcam also runs smoother!
ExFAT support doesn't seem to be working though. I've tried to read an SD Card ExFAT formatted and it didn't work (corrupt error message).
Click to expand...
Click to collapse
for clean testing exFAT you need should be sure what ROM have support this FS
if with other kernel on your rom exfat work then, yeahh, something wrong with my kernel exfat
thanks for feedback)
eremitein said:
for clean testing exFAT you need should be sure what ROM have support this FS
if with other kernel on your rom exfat work then, yeahh, something wrong with my kernel exfat
thanks for feedback)
Click to expand...
Click to collapse
I'm on Stock ROM 10.0.4.0.
So, no exDAT support, right?
I am undecided whether to stay in oreo with this kernel or pie always switch to this kernel.
It is wrong to ask, instead of trying, but I don't have much time to test
No one with any feedback on the battery and stability?
(Noob question, what is it the difference of legacy kernel? )
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EXPERIENCE HALOGEN | EXPERIENCE AWESOMENESS
For Changelogs please see POST #2.
For FAQ please see POST #3.
DISCLAIMER :-
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will simply laugh at you.
*/
NOTE :-This kernel is ONLY meant for AOSP/CM ROMs.
This IS NOT MEANT for STOCK ROMs.
Upto R14 Kernel supports Lollipop.
From R15 onwards Kernel supports ONLY Marshmallow.
From R18 onwards Kernel supports Doze + Marshmallow.
From R30 onwards Kernel supports ONLY Nougat.
WHAT IS THIS KERNEL ?This kernel is built especially for these 3 things :- 1. Audio, 2. Performance, 3. Battery Life.
The main aim of halogen is to bring performance without compromising stability & battery. And that is what I intend to do. Go ahead and try this kernel, and it should make your device much better.
FEATURES :-(features of ONLY the latest version is mentioned)
Based on Linux Kernel 3.4.42
Updated with the latest CM14.1 sources
Built with UBER Toolchain GCC-4.9
Any Kernel 2 script used
Kexc Hardboot patched
Built with optimization flags for enhanced performance
GPU OC to 533 MHz & UC to 100 MHz
Disabled PowerHal log spam (thanks to @attack11)
Faux Sound Control v3.5
Headset in high performance profile
Slimbus overclocking for superior audio quality
Enabled CPU boost
Add Frandom
Power effecient work queues enabled by default
Reclaim RAM from loggers
Disable gentle_fair_sleepers for increased I/O
Enable advanced unaligned_access
Enable arch_power
Use power efficient workqueues for bam_dmux
Optimize square root algorithm
intelliactive, intellidemand, zzmoove cpu governors
intelliplug v4.0 cpu hotplug
enabled advanced tcp congestions
Ability to use your device as USB Keyboard / Mouse
Stereo call record support
psx2usb
KCAL v2 by Savoca
Dynamic FSync
Added optimized square root algorithm
Added optimized ARM_RWSEM algorithm
NEON kernel mode
Ex-FAT support
LONG TERM SUPPORT :-
This kernel will be supported for a long time with updates directly streamed from CM kernel sources i . e . as long as CM keeps publishing updates to its base, this kernel will also be updated.
DOWNLOADS :-(do not mirror my links)[ Latest Version ][ Older Versions ]
INSTALLATION INSTRUCTIONS :-
Reboot into recovery.
Make a nandroid BackUp.
Select Install zip from SD Card.
Select the Downloaded zip.
Then Reboot to System.
Leave your phone untouched for 2-3 minutes after first reboot to allow the kernel to spread it's wings.
RECOMMENDED APPS FOR KERNEL TWEAKING :-
Kernel Adiutor
Faux123 Kernel Enhancement Pro
I do not support any other apps.
CREDITS:-~~Google
~~Motorola for kernel sources
~~Flashhhh
~~hurtsky
~~Luk & Luca -for various fixes
~~Thecrazyskull, DC07 -for cherry-picks
~~Faux123
~~Savoca
~~YoshiShaPow
~~attack11
~~many more.......
Please don't start a war here if I forgot to mention someone. PM me and I will add him / her.
XDA:DevDB Information
HalogenKernel, Kernel for the Moto G 2014
Contributors
zakee94
Source Code: https://github.com/zakee94/halogen_kernel/
Kernel Special Features: Faux sound, Kexec, KCAL, Intelliplug
Version Information
Status: Stable
Current Stable Version: R31
Stable Release Date: 2017-01-07
Created 2015-06-11
Last Updated 2017-01-07
Changelog
CHANGELOG(simplified changelog, for full changelog please look at my GitHub commits.)
R31 --> 07/01/2017
Merged CM Updates
For older changelogs :-
R30 --> 30/10/2016
First Nougat release
For changes please see post #670
R29 --> 24/07/2016
Merged CM Updates
R28 --> 08/06/2016
Merged CM Updates
AROMA installer
Added tripndroid IO Scheduler
CPU optimizations
ARM tweaks and updates
R27 --> 12/05/2016
Merged CM Updates
R26 --> 10/04/2016
Merged CM Updates
R25 --> 16/03/2016
Merged CM Updates
R24 --> 18/02/2016
Reverted the following :-
CPU OC/UC - 1593/96 MHz
CPU UV
LMK tweaks + Agressive LMK mode
Following CPU govs --> lionheart, dancedance, bioshock, alucard
Following Hotplugs --> Mako, Auto-smp
Added the following -->
Merged CM Updates
Built with UBER Toolchain GCC-6.0
R23 --> 19/01/2016
Merged CM Updates
Overhauled boot script
R22 --> 11/01/2016
Rebased kernel on android 6.0.1_r10
Rebuilt kernel from scratch
Merged a lot of CM updates
Added futex updates
Cpu UV added (hardcoded values)
Added 2 new hotplugs :- Auto-smp & Mako
Removed Alucard Hotplug
Overhauled updater script
R21 --> 30/12/2015
Add CPU OC/UC - 1593/96 MHz
Adapt cpu_govs for CPU OC/UC
Merged CM Updates
R20 --> 29/12/2015
Merged CM Updates
R19 --> 23/12/2015
Added 3 new cpu_govs: Lionheart, DanceDance & Bioshock
Enabled CPU boost
Added optimized ARM RWSEM algorithm
ARM updates merged directly from CAF (See Git)
Mutex updates (See Git)
LMK updates (See Git)
Add agressive LMK
Build using -O3 & -graphite flags for enhanced performance
Cortex-A7 optimizations in Makefile
block: Disable add_random
Implemented LoUIS cache
Made bioshock as default gov. in boot script
Many other optimizations (smp, rcu, vfs, vfp, etc... See Git)
R18 --> 20/12/2015
Merged latest CM Updates (support for Doze)
R17 --> 17/12/2015
Merged latest CM Updates
Made interactive as default gov. in boot script
R16 --> 03/12/2015
Fixed FM Radio not working
Fixed Section Mismatches
Enabled pipe flag
R15 --> 27/11/2015
Build Kernel from scratch based on cm-13.0 kernel base
Compiled using Hyper-Linaro 5.1 Toolchain
Kernel version brought down to 3.4.42 temporarily
Revert SE Linux force permissive
Revert use Modulo sched & strict alias flags
Enabled Simple GPU Algorithm
R14 --> 11/10/2015
Merged latest updates
Updated kernel to v3.4.109
Updated bfq to v7r8
R13 --> 6/09/2015
Brought back the following :-
SE Linux tweaks
msm:kgsl tweaks
Enable unaligned_access
DOLBY dap dependency fix
Removed the following :-
Simple GPU Algorithm
New features :-
Update with latest CM sources
Implement Adreno Idler
R12 --> 26/08/2015
Removed the following :-
CPU UC to 96MHz
SE Linux tweaks
USB Fast Charge v2
Added optimized ARM_RWSEM algorithm
msm:kgsl & wcnss tweaks
Optimize square root algorithm
Enable unaligned_access
DOLBY dap dependency fix
Ultrasound & ASoC : qdspv2 tweaks
Changed the following :-
Update 'zzmoove' cpu_gov to v1_beta-8
Set 'zzmoove' as the default CPU Gov
R11 --> 22/08/2015
Merged latest CM updates
R10 --> 13/08/2015
Once again rebuilt the whole kernel !
Updated with latest CM sources
Possibly fix interactive deep-sleep issues
R9 --> 25/07/2015
Updated with the latest CM sources
Rebased and built whole kernel from SCRATCH
Removed useless tweaks
Updated cpu_hotplugs & cpu_govs
Optimized zzmoove profiles again
R8 --> 11/07/2015
Updated with the latest CM sources
Reverted RAM OC to 566MHz
Reverted some power hogging tweaks
Updated hotplugs :- intelliplug, msm-hotplug (neobuddy89 versions)
Added Bricked Hotplug
Optimized zzmoove profiles
R7 --> 30/06/2015
Disabled msm_limiter
zzmoove : add back zzopt & zzmod, zzopt unstable for now.
Introduce kernel cooker
Bug fixes
R6 --> 24/06/2015
Updated kernel version to 3.4.108
Enabled kernel_config_neon
zzmoove : remove profiles 'zzopt' & 'zzmod'
Add strict_aliasing & modulo_sched flags
Add msm:kgsl & wcnss tweaks (see GitHub)
Add MSM Frequency Limiter driver v3.6
Add Ultrasound & ASoC : qdspv2 tweaks (see GitHub)
RAM OC to 566 MHz
And many more I can't fit in here, so please checkout GitHub.
R5 --> 20/06/2015
Added USB Fast Charge v2
Enabled NEON mode
Added Ex-FAT support
SE Linux tweaks (see GitHub)
zzmoove : set default profile to 2
tune up some governors
Enable intelliplug by default
Random / entropy tweaks
R4 --> 17/06/2015
CPU UC to 96 MHz
GPU OC to 533 MHz & UC to 100 MHz
Disabled PowerHal log spam
Reclaim RAM from loggers, increasing default ram to 883 Mb
Disable gentle_fair_sleepers for increased I/O
Enable unaligned_access
Enable arch_power
Use power efficient workqueues for bam_dmux
Optimize square root algorithm
Many tick, clockevents & timer tweaks (see GitHub)
Lower swappiness from 60 --> 45
Added optimized ARM_RWSEM algorithm
Force SE Linux permissive
Added state notifier driver
Enabled quick wakeup
NOATIME and NODIRATIME as default
R3 --> 14/06/2015
CPU Govs removed :- wheatley, nightmare, HYPER, darkness, pegasusq, ondemandplus
Added simple GPU Algorithm
3 new CPU Hotplugs added :- intelliplug, alucard, msm-hotplug.
Power effecient Wqs enabled by default
Reclaim RAM from loggers
devfreq:Add conservative governor
devfreq tweaks (see GitHub)
Dynamic FSync added
Intellithermal v2 added
R2 --> 13/06/2015
New CPU Govs added :-
intelimm, intellidemand, intelliactive, smartmax, pegasusq, alucard, impulse, ondemandplus, wheatley, yankactive, nightmare, HYPER, darkness, zzmoove.
New TCP Congestions enabled :-
westwood, cubic, reno, hstcp, hybla, vegas, veno, scalable, lp, yeah, illinois, hctp, advanced, highspeed.
New I/O Schedulers added :-
fiops, vr, zen, sio, bfq, cfq, deadline, noop, tripndroid, fifo
Added KCAL v2 by Savoca
Optimized slub memory allocation
Increase torch power by 20 mA
Added stereo call recording support
psx2usb
Added NVIDEA Power effecient patches
Changed CFlags = Ofast
Optimize sfck compression
Many sched tweaks and optimizations (see GitHub)
R1 --> 12/06/2015
Initial Release
FAQ
FAQ
This kernel does not have X, Y or Z feature. Please add it !
No such requests shall be entertained.
For this device the closer to stock we are, the better it is. Hence no need for "fancy" useless features/tweaks. The main aim of halogen is to bring performance without compromising stability & battery. And that is what I intend to do.
AND if you really want this or that feature which is not there in halogen, please feel free to compile your own builds.
Oh no ! I encountered a BUG !
Upload the file named last_kmsg that located in /proc/last_kmsg. It contains kernel logs. Clearly state the bug / what you experienced along with your current kernel settings. Bug reports without logs will be ignored.
Recommneded settings ?
Halogen is pre-configured for best. For custom settings please google, do some research and you are encouraged to post your own settings in this forum. You can start here.
My battery drained overnight !! Look at these screenshots...
Not a halogen fault. The kernel does not “drain” battery. On Android devices, the kernel provides a mechanism for keeping the phone awake, called a wakelock. Processes running on the device (e.g. apps and services) can ask the kernel for a wakelock, and the kernel will oblige. So yes, the kernel is technically keeping the phone awake, but only because an app or service has asked it to. It is these apps and services that are misbehaving and causing drain, not the kernel. Doze mode, introduced in Android Marshmallow, is designed to limit the time that apps and services can wake up the device.
All thanks to @flar2 for his excellent post.
Wow,
What is better setting for this Kernel ?
legendsbr said:
Wow,
What is better setting for this Kernel ?
Click to expand...
Click to collapse
There is not much to set in this kernel at present. Leave it as it is. Tweak sound to your hearts desire !
What governors & I/O schedulers are already included? Just the "basic" AOSP kernel ones for now?
Yes...
But updates will come soon !!!
You simply did it! Thank you so much!
There is a long way to go but I hope you can add more stuff, not forgetting the DoupleTap to wake up the screen
Testing
NEW BUILD IS UP !!!
[ 12 June, 2015. Version --> R2 ]
New features added :-
** 14 new cpu govs added !!!(check changelog for their names) **
** New I/O schedulers added (added tripndroid) **
** New TCP Congestions added **
** Stereo call recording **
and MUCH, much more......................CHECK CHANGELOG.
Did you know ? :-
With the release of R2, Halogen Kernel becomes the ONLY kernel with maximum number of cpu govs !!! (among all kernels for stock/cm of titan/falcon).
This kernel has around 20 cpu govs !!!
NOTE :-
Try reading this guide by @gsstudios before selecting out among the many CPU Govs.
E _N_J_O_Y !!!
This kernel really works for battery life... Smooth and fast and also improves battery life. Appreciate you're work!
giannis_mathiou said:
This kernel really works for battery life... Smooth and fast and also improves battery life. Appreciate you're work!
Click to expand...
Click to collapse
Thanks for review...
More updates will come soon !
This kernel mainly focuses on audio and battery life.
zakee94 said:
Thanks for review...
More updates will come soon !
This kernel mainly focuses on audio and battery life.
Click to expand...
Click to collapse
Thank you so much for the updates!
Can you make a post with the recommended settings for battery life and the best performance possible?
TiGuy82 said:
Thank you so much for the updates!
Can you make a post with the recommended settings for battery life and the best performance possible?
Click to expand...
Click to collapse
Of course I will....
zakee94 said:
Of course I will....
Click to expand...
Click to collapse
there is something terribly wrong... at boot maximum cpu frequency is set to 384MHz, this give terribly long boot time, stuttery bootanimation and longer time for apps optimization after a rom update
EDIT: temporarily solved with an init.d script, here it is if someone has the same problem https://www.dropbox.com/s/qmcdlljjj0klzaf/cpufreq.zip?dl=0
ktulu84 said:
there is something terribly wrong... at boot maximum cpu frequency is set to 384MHz, this give terribly long boot time, stuttery bootanimation and longer time for apps optimization after a rom update
Click to expand...
Click to collapse
Even I had been facing the bug...BUT I fixed it out and the BUG IS NO MORE !!!
I will be soon releasing the update ! The problem was with some improperly adapted CPU governors which limited the max cpu freq to 384 at boot. I have removed them and now the cpu clocks @ 11190 during boot.
I appreciate your work with the script. Its good, and I hope you will keep supporting my kernel in the future.
@ktulu84
Available RAM is less than stock CM12.1 kernel - ~900 MB vs ~860 MB. Pretty sure you're already aware of it, but thought I'd highlight it anyway just in case.
Sent from my Moto G 2014 using Tapatalk
Is the kernel stable? i'm using cm12.1 for daily use and some of the kernels i've tried always gave me the problem where the logcat is spammed with something liek "failed to acquire lock" everytime i touched the screen, can someone report?
xeraphael said:
Available RAM is less than stock CM12.1 kernel - ~900 MB vs ~860 MB. Pretty sure you're already aware of it, but thought I'd highlight it anyway just in case.
Sent from my Moto G 2014 using Tapatalk
Click to expand...
Click to collapse
Yes I m aware... It will be improved in future versions.
However it does not matter much, Linux handles memory in a different way and will release appropriate ram when required. What really matters is whether you are getting a smooth experience or not.
xeraphael said:
Available RAM is less than stock CM12.1 kernel - ~900 MB vs ~860 MB. Pretty sure you're already aware of it, but thought I'd highlight it anyway just in case.
Click to expand...
Click to collapse
Yes, there are changes in that. As the OP said, it depends on the kernel. Since our device has 1024MB RAM, the remaining RAM gets allocated to Graphics, audio processing, etc. If you are familiar with it, its very similar to Intel & AMD's allocation of RAM to Graphic memory in computers.
MM SPRINT DTUX KERNEL W07F v1.7 / 710N v2.6RE / DR4G0N v2.8 (EOL)
[STOCK/PORT] [ENFORCING/PERMISSIVE] [STABILITY] [BALANCE] [SAFETYNET]
*** Disclaimer***
You are the solely responsible if something goes wrong. It's Recommended to be on MM PK1 BASEBAND. AND READ CAREFULLY FOR THE INSTALL AND DETAILS.
This is the beginning, DTUX KERNEL, there will be 3 tiers:
-Wolf Tier: Stock alike, no fanciness but with some security patches and Enhancement in the performance and battery department.
-Lion tier: A good volume of tweaks will be available beside what the Wolf tier offers.
Dragon tier AKA 3DDYB022 3D1T10N! : Emotion alike, all the bells and whistles a la Dtux
Install instructions
-Just Flash
-Magisk v13.3 will also be installed
-Get Magisk Manager 5.1.1 HERE if you are using this root method for the first time
-Settings will be reset to default for Kernel Adiutor to prevent boot issues.
-W07F 3D1T10N Has been configured to work with a profiles system with Spectrum Kernel App -(DOWNLOAD HERE)
-710N & DR4G0N 3D1T10N Comes with Dtux Adiutor!!!
Steps for proper Gain Changes with Faux Sound
1-Turn OFF the gain locks if its on (default is OFF)
2-Change the gains to your liking
3-Turn back ON the gain locks to ensure they won't be changed by any other app and to survive reboots if the sound tab applies on boot.
NOTE THAT SPECTRUM IF YOU JUST REBOOTED IT MAY TAKE UP TO 2MIN TO OPEN AS IT APPLIES LAST CHOSEN PROFILE AT BOOT
-KERNEL STARTS IN ENFORCING MODE BY DEFAULT, BREAKING VIPER4ANDROID (IT NEEDS PERMISSIVE), INTALL THIS: The SELinux Toggler
AND GIVE KUDOS TO THE DEV. THE APP WILL TAKE CARE ON EVERY BOOT TO PUT IT AS YOU LAST LEFT IT, WITH AN OPTIONAL NOTIFICATION
Downloads
ON 2ND POST FOR W07F, 3RD FOR 710N, 4TH FOR DR4G0N aka 3DDY_B002 3D1T10N
Credits
@Ram121 (Thanks for the help and commits!)
@Freeza (Thanks for the source and great advices!)
@Pafcholini (Thanks for the commits!!)
@kevintm78 (Thanks for the Head start on this bumpy road, Kudos!)
OPEN TO FEATURES REQUEST FOR KERNEL :laugh:
XDA:DevDB Information
DtuxKernel, Kernel for the Sprint Samsung Galaxy Note 4
Contributors
carlosggb
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v2.6
Stable Release Date: 2017-08-14
Current Beta Version: v2.8
Beta Release Date: 2017-08-25
Created 2017-07-14
Last Updated 2017-08-30
Reserved
DtuxKernel W07F 3D1T10N
Initial Changelog for W07F 3D1T10N V1.1.
-Based on PK1 Kernel Sources
-Built using the Reliable arm-eabi-4.9 Toolchain
-Fixed DirtyCow vulnerability
-Added to the interactive Governor (default) the commit cf0fad49d17cb8273ce555dd5b7afab67d7923bf for increased performance and battery
-Added PM / sleep: Fix memory leak in pm_vt_switch_unregister(). For better ram management.
-Kernel Switches Permissive/Enforcing (making it compatible with Android Auto / SELinuxToggler and more!)
-tcp: tweak for speed
-power: quickwakeup: initial driver
-USB: android: Fix memory leak in mass_storage_function_init()
-Added HAVE_EFFICIENT_UNALIGNED_ACCESS & Added KSM
-ZeroLemon Commit added!
v1.2 W07F 3D1T10N Changelog
dm-crypt: run in a WQ_HIGHPRI workqueue
dm-verity: run in a WQ_HIGHPRI workqueue
arch: sec_bsp: silence annoying messages
binfmt_elf.c: use get_random_int() to fix entropy depleting (Jeff Liu )
android: binder: use GPF_HIGHUSER flag since binder is designed for userspace
Optimize copy_page for modern ARM platforms
arm/kernel/irq.c: remove irq affinity warnings
ASoC: msm: qdsp6v2: Add FLAC in compress offload path
kgsl_pwrscale: fix simple_ondemand GPU Governor Crash
asoc: wcd9xxx: Improve headset detection
tick: don't update idle time if cpu offline
qdsp6v2: Stereo Call Recording Support
Expose the option to user - CRC Checking (if disabled performance could increase up to 30%)
A couple of ramdisk tweaks.
v1.3 W07F 3D1T10N Changelog
Native init.d support
Spectrum Kernel App support (GET APP HERE!)
The 4 profiles have been configured to comply with Dtux Standards, please test them and report your observations/suggestions
v1.4 W07F 3D1T10N Changelog
STILL PASS SAFETYNET!!! THANKS @Nattrammar !!!!
Sysfs interface for Gentle_Fair_Sleepers [neobuddy89]
thermal-core: Fix to send correct trip type to get trip temperature
arm: smp: Update the topology masks before calling CPU_STARTING notif
fs: sync: Asynchronous Fsync from HTC
Further tweaking Kernel profiles, specially the Battery Saving one.
Reworked the ramdisk again.
v1.5 W07F 3D1T10N Changelog
WE LOST THE ENFORCING/PERMISSIVE SWITCHING HABILITY NEED USERS TO TEST THIS KERNEL ON ANDROID AUTO
Updated Magisk to 13.3 (link to the NEW Magisk Manager updated too, go get it!)
Added Busybox-YDS 1.26.2 to kernel ramdisk
Added a temperature reducer commit
Misc tweaks
v1.6 W07F 3D1T10N Changelog
WE LOST THE ENFORCING/PERMISSIVE SWITCHING HABILITY NEED USERS TO TEST THIS KERNEL ON ANDROID AUTO
Added Busybox-YDS 1.27.1 to kernel ramdisk
PROFILES HAVE BEEN OPTIMIZED, YOU WONT NEED KERNEL ADIUTOR FOR THIS EDITION AT ALL, TRY AND YOU WILL SEE :laugh:
msm_hsic_host wakelock adjustable (recommended between 50% - 20%)
rmnet usb fix
bcmdhd reduced rx wakelock
bcmdhd reduced ctrl wakelock
bluesleep - reduce wakelock timeout the dtux way
SensorHub, Proximity and Humidity wakelocks in check!
Significant motion sensors wakelock in check! (Experimental)
Bluetooth: Fix L2CAP deadlock
Added many TCP protocols
Improved Extended battery support (better Calculations)
msm_serial_hs: release dma wakelock properly
Decrease BT/FM TX timeouts to improve deep sleep ratio.
bluetooth: bluesleep: Remove IRQF_DISABLED noop flag
Added User Configurable Spectrum Profiles (via Spectrum folder, for advanced users)
v1.7 W07F 3D1T10N Changelog
ENFORCING / PERMISSIVE SWITCH IS BACK!!!!
Added ZL4 compression support to kernel including the following commits:
PM / sleep: Fix memory leak in pm_vt_switch_unregister()
decompressor: add LZ4 decompressor module
lib: add support for LZ4-compressed kernel
lib: add lz4 compressor module
lib/lz4: correct the LZ4 license
lz4: fix compression/decompression signedness mismatch
Apply CFLAGS, -Os to decompress.o to improve decompress performance
lz4: ensure length does not wrap
lz4: fix another possible overrun
lz4: add overrun checks to lz4_uncompress_unknownoutputsize()
arm: add support for LZ4-compressed kernel
Downloads
DtuxKernel-W07F_3D1T10N_v1.7-Unified_Build SAFETYNET COMPLIANT VERSION!
Older Snapshots
DtuxKernel-W07F_3D1T10N_v1.6-Unified_Build SAFETYNET COMPLIANT VERSION!
DtuxKernel-W07F_3D1T10N_v1.5-Unified_Build SAFETYNET COMPLIANT VERSION!
DtuxKernel-W07F_3D1T10N_v1.4-Unified_Build SAFETYNET COMPLIANT VERSION!
DtuxKernel 710N 3D1T10N
Initial Changelog for 710N 3D1T10N V1.8
-Based on DtuxKernel W07F ED1T10N v1.7
***Prevent on interactive governor changes to IO_IS_BUSY
ramdisk: limit boot speed to 2.27ghz (for a cooler reboot!)
drivers: Add state notifier driver
msm: Add Intelli Hotplug Driver
msm: Add MSM Hotplug driver
msm: add Alucard Hotplug Driver
msm: Add Bricked Hotplug
msm: Add Mako Hotplug
sound/soc/codecs: Faux Sound control for WCD9330 TomTom codec driver (PARTIALLY WORKING)
intelli_thermal v1 by Faux123 added
IntelliThermal finally
CPU OVERCLOCK-UNDERCLOCK ENABLED removed in R2 for the moment
GPU OVERCLOCK-UNDERCLOCK ENABLED removed in R2 for the moment
Voltage Control: generic voltage control for DTS based kernels
Add Led control [Twistedumbrella & Ktoonsez]
Added LED Control & Fading Control
Added Display Kcal Controls
Added Adreno Idler GPU Hotplug
Added the following I/O Schedulers:
bfq
fifo
fiops
noop
row
sioplus
sio
tripndroid
vr
zen
Added the following CPU Governors:
Alucard
Barry_Allen
Impulse
InteractiveX
Lionheart
Pegasusq
SmartassV2
zzmoove 1.0 Beta7
V1.9 Changelog
clock-krait-8974: fix cpu voltage table
Revert faux Sound (I personally found some volume inconsistencies )
Fixed two critical bugs on Alucard Hotplug
Force Fast Charge v1.2 added
added usb-gadget: support USB keyboard (use this https://play.google.com/store/apps/details?id=remote.hid.keyboard.client)
Added Spectrum data cleaning script (Spectrum is still necessary to configure a profile for wakelock control)
Reverted ramdisk: limit boot speed to 2.27ghz
V2.0 Changelog
FULL Faux Sound Engine Implemented v3.6
cpufreq: boot a little slower, don't accept a target freq of 0
Decrease time to enter sleep
Increase io performance
Added Governors: Bluactive, Bioshock, Hyper and Nightmare
V2.1 Changelog
DTUX ADIUTOR APP (FIRST RELEASE, BASED ON CSK ADIUTOR APP) THANKS @CrazyGamerGR !!!)
GO HIT THANKS HERE, AS IS THE SAME CHIPSET OF HIS AWESOME KERNEL I JUST NEEDED TO ADD THE EXTRA WAKELOCK CONTROLS SO PLEASE THANK HIM CAUSE HE MADE IT EASY FOR ME AND ALL OF YOU
ASoC: wcd9xxx-mbhc: fix codec power leakage during suspend
ASoC: wcd9330: Update EAR power down sequence
Updated Alucard Hotplug
Added Msm_Sleeper and AutoSMP Hotplugs (Msm_Sleeper only visible on Kernel Adiutor MOD)
Intellithermal Minor fix (Still v1)
Reverted wakelock experiment on sig motion back to version v1.9
Added Powersuspend Lcd/Hybrid/Auto and Userspace modes (preparing for an efficient Wake Gestures )
Forced User Cpu Freq via Commit (cpu freq change will stick better now!)
Added Adreno low screen off freq suspend state (preparing for an efficient Wake Gestures )
Updated ZZmoove Gov to v1.0 b8 + Zzmoove hotplug enabled!!!!! (must turn off all hotplugs and set a zzmoove profile!)
Add GPU underclock/overclock (166 Mhz-800 MHz) (also preparing for an efficient Wake Gestures ) OVERCLOCK RESPONSABILITY IS ON YOUR OWN!!!
Minor fixes here and there
V2.2 Changelog
DTUX ADIUTOR APP CORRECTED, STILL UGLY BUT ALL WORKS LOL
DOWNGRADED MAX GPU FREQ TO 700MHZ (DONT WANT TO RISK YOUT DEVICES)
SLIGHTLY UNDERVOLTED THE GPU
UPGRADED ALUCARD GOVERNOR FROM V1 TO V2.1 WOOOO HOOOO
V2.3 Changelog
Updated powersuspend from v1.7 to v2 and added multiple hooks and code cleaned up! - it probably wasnt working properly
Minor fix on Smartass2 governor (better battery)
added experimental toggle to disable ssp sensors wakelock on screen off state (THIS IS TOP SECRET LOL)
Eliminated sig motion wakelock EXPERIMENT
V2.4 Changelog
FIXED SPEN DETECTION! (BROKEN ON V2.2 & V2.3 )
ADDED INITIAL WAKE GESTURES SUPPORT, PLEASE REPORT FUNCTIONALITY AND BATTERY RESULTS
UPDATED DTUX ADIUTOR TO SUPPORT WAKE CONTROLS
V2.5 Changelog
UPDATED DTUX ADIUTOR WITH AMOLED THEME AND RECOMMENDED SETTINGS!
ADDED ADDITIONAL HOOKS TO SUSPEND FOR BETTER SLEEP
UPGRADED SENSORHUB WAKELOCK CONTROL, FEELS BETTER NOW
V2.6 Changelog
Downgraded powersuspend from v2.0 (unofficial) to v1.7 (Official) + fixes
cpufreq: cpu-boost: Multiple optimizations
ADDED TOGGLE FOR CPU BOOST!!!!
arm: make return_address available for ARM_UNWIND
minor fix to Adreno driver
Cleanup interactiveX governor code
add UMS function to kernel (External Memory Mass Storage Mount) DOWNLOAD THE APP HERE!!!
Added Cafactive, LionFish and Yankactive governors
Added Maple I/O Scheduler. Yeeeeee Haaaaaaa!!!
Now you can control the custom AC and USB Charge levels!
Added toggle to bypass Samsung Screen On Charging limits!
minor fixes on DtuxAdiutor
Screen Mirrorring fix included on the ramdisk
enabled adb via ramdisk
enabled kernel logging for debbuging purposes (LOG located in /proc/last_kmsg <-- upload this if you get a reboot or any other type of problem that YOU understand is kernel related).
V2.6 RELOADED Changelog
REWORKED THE FAUX AUDIO MOD TO WORK AS IT SHOULD! (READ POST #1)
Downgraded Alucard Hotplug in hopes to stop reboots on it
Fixed LOG TAB!!!!
Fixed CRC and Logs Switch
Fixed Custom fast charge values!!!
ENJOY!
Downloads
DtuxKernel-710N_3D1T10N_v2.6RE-Unified_Build
Older Snapshots
DtuxKernel-710N_3D1T10N_v2.5-Unified_Build
DtuxKernel-710N_3D1T10N_v2.4-Unified_Build
DtuxKernel-710N_3D1T10N_v2.3-Unified_Build
DtuxKernel-710N_3D1T10N_v2.2-Unified_Build
DtuxKernel DR4GON a.k.a 3DDY_B022 3D1T10N
V2.8 Changelog
Based on 710N v2.6RE
Removed Intellithermal
ADDED DTUX THERMAL ENGINE!! (Based on the excellent work by Francisco Franco!)
FULL FAUX SOUND ENGINE WORKING!!!! (READ POST #1)
Negative Gains added to Faux Sound Engine!!!
Enabled NetHunter (For Wireless Auditoring)
Added Blu_Plug Hotplug Driver
Added Wireless Fast Charging custom controls support
Upgraded Alucard governor from v2.1 to v3.0
Downgraded Alucard Hotplug in hopes to stop reboots on it
EVERYTHING SHOULD WORK ON DTUX ADIUTOR
@bigbabo , this is for you bro
ENJOY!
Downloads
DtuxKernel-DR4G0N_3D1T10N_v2.8-Unified_Build
Reserved
Preliminar Guide for Kernel usage
Thanks to @Saber and other relevant posts i'm going to give you a quick resume of what i understood and my personal findings. i'm open to any changes on this.
Take a moment to thank Saber for the wonderful research he has done.
THREAD HERE!!!
The I/O Schedulers are ranked and categorized as it follows:
bfq (#1 MULTITASKING)
cfq (ANDROID DEFAULT) (#2 MULTITASKING)
zen (tied #1 BALANCED) (#2 GAMING)
tripndroid (tied #1 BALANCED)
row (#2 BALANCED)
deadline (#1 GAMING)
noop (#1 BATTERY)
fiops (#2 BATTERY)
sioplus (Under Evaluation)
sio (Under Evaluation)
fifo (Under Evaluation)
vr (Under Evaluation)
CONCLUSION: ZEN and TRIPNDROID are the best
Recommended I/O Read Ahead: 768kb to 1024kb Internal
: 384kb to 512kb External
The newly added CPU Schedulers are ranked and categorized as it follows:
INTERACTIVE (DEFAULT) (Overall = 13)
Performance: ***** (5)
Battery: *** (3)
Compact/stability: ***** (5)
ALUCARD (Overall = 11)
Performance: *** (3)
Battery: ***** (5)
Compact/stability: *** (3)
BARRY_ALLEN (Overall = 11)
Performance: ***** (5)
Battery: *** (3)
Compact/stability: *** (3)
IMPULSE (Overall = 13)
Performance: ***** (5)
Battery: **** (4)
Compact/stability: **** (4)
INTERACTIVEX (Overall = 13)
Performance: ***** (5)
Battery: *** (3)
Compact/stability: *** (5)
LIONHEART (Overall = 10)
Performance: **** (4)
Battery: *** (3)
Compact/stability: *** (3)
PEGASUSQ (Overall = 12)
Performance: **** (4)
Battery: **** (4)
Compact/stability: **** (4)
SMARTASSV2 (Overall = 10)
Performance: **** (4)
Battery: *** (3)
Compact/stability: *** (3)
ZZMOOVE 1.0 BETA7 (Overall = 11)
Performance: **** (4)
Battery: *** (3)
Compact/stability: **** (4)
CONCLUSION: The default Interactive, Impulse and Pegasusq are hard to beat overall, Alucard is the best on Battery without losing noticeable performance and of course Zzmoove which could become the best if fine tuned.
Recommended Hotplug for Balanced/Battery: Alucard then Intelliplug
Recommended Hotplug for Balanced/Performance: MSM Hotplug then MPDecision
Most Stable: MPDecision
Recommended GPU Drivers: msm-adreno-tz with Adreno Idler.
So there you have it!!! Post your recommendations and conclusion too!!!!
Any chance of a ZL version as well?
wineguy said:
Any chance of a ZL version as well?
Click to expand...
Click to collapse
Definitely. In all ears for what features you guys want
carlosggb said:
Definitely. In all ears for what features you guys want
Click to expand...
Click to collapse
Im not sure if its kernel related probably is on un7 rom after charging to 100% and unplugging i used to go 4-5 hpurs before it drops 1% can something like that be intergrated to this kernel "if" its the part of the kernel , battery life really is all important specially to those with stock battery
bigbabo said:
Im not sure if its kernel related probably is on un7 rom after charging to 100% and unplugging i used to go 4-5 hpurs before it drops 1% can something like that be intergrated to this kernel "if" its the part of the kernel , battery life really is all important specially to those with stock battery
Click to expand...
Click to collapse
Adding ZL to the kernel helps stock batteries that sre starting to give trouble but not too much, this is unfortunately a battery problem.
We the note 4 users need to find a battery of another device that fits, like cameras other mainstream phones, etc, to have a fresher battery with us.
Whoever finds one that fit, please share it with us:good:
Wow, Making New Kernels!! Awesome Bro! Keep up the Great Work!!
OP - Will this work with the Ultimate Note 7 ROM?
I'm running the Ultimate Note 7 ROM on a PK1 base flash.
Does_It_Matter said:
OP - Will this work with the Ultimate Note 7 ROM?
I'm running the Ultimate Note 7 ROM on a PK1 base flash.
Click to expand...
Click to collapse
Please try it, it should, download the stock kernel from the un7 thread just in case you get into trouble
carlosggb said:
Please try it, it should, download the stock kernel from the un7 thread just in case you get into trouble
Click to expand...
Click to collapse
Yeah, I re-read the first post about testing on UN7
Unfortunately it did not work.
I flashed the new kernel, wiped cache/dalvik - rebooted, waited, waited some more, took a break, came back - still nothing - sat at the Darth Vader boot screen.
Pulled the battery, re-flashed the Beastmode Zerolemon r61 kernel, wiped cache/dalvik, rebooted, and then after a few it came back up with Android is Starting / optimizing.
Looks like a no-go for this on UN7 (and running the PK1 stock pre-flashed before installing UN7)
Does_It_Matter said:
Yeah, I re-read the first post about testing on UN7
Unfortunately it did not work.
I flashed the new kernel, wiped cache/dalvik - rebooted, waited, waited some more, took a break, came back - still nothing - sat at the Darth Vader boot screen.
Pulled the battery, re-flashed the Beastmode Zerolemon r61 kernel, wiped cache/dalvik, rebooted, and then after a few it came back up with Android is Starting / optimizing.
Looks like a no-go for this on UN7 (and running the PK1 stock pre-flashed before installing UN7)
Click to expand...
Click to collapse
Thanks for reporting, i will look for the commit missing and add it to it. Stay tuned.
UPDATE! COMPILING NEW VERSION, ADDING THE FOLLOWING COMMITS
-tcp: tweak for speed
-power: quickwakeup: initial driver
-USB: android: Fix memory leak in mass_storage_function_init()
-Added HAVE_EFFICIENT_UNALIGNED_ACCESS & Added KSM
V1.1, is a snapshot kernel but stable, help me guys to improve it!
OK - Flashed the 1.1 fix and UN7 booted up fine!
Here are a couple of screenshots.
One thing of interest, when I booted up with this after flashing from Recovery, it stated SELinux is not enforcing.
Doesn't matter to me but just wondering as first post said it is SELinux Enforcing by default? (Whoops - shows Enforcing in screenshots - ignore!)
Also, my reported battery shows 3220 mah, but it is an 8000mah battery, but it also reported this for Beastmode r61 kernel as well.
carlosggb said:
Definitely. In all ears for what features you guys want
Click to expand...
Click to collapse
Voltage control, Sound option like Beastmode kernel, Hotplug options (mp decision, intelliplug...) for starters...lol
IT'S LIVE!!!
FIRST UNIFIED BUILD!!!! FOR PORTS OR STOCK KERNEL!!!
v1.2 Changelog
dm-crypt: run in a WQ_HIGHPRI workqueue
dm-verity: run in a WQ_HIGHPRI workqueue
arch: sec_bsp: silence annoying messages
binfmt_elf.c: use get_random_int() to fix entropy depleting (Jeff Liu )
android: binder: use GPF_HIGHUSER flag since binder is designed for userspace
Optimize copy_page for modern ARM platforms
arm/kernel/irq.c: remove irq affinity warnings
ASoC: msm: qdsp6v2: Add FLAC in compress offload path
kgsl_pwrscale: fix simple_ondemand GPU Governor Crash
asoc: wcd9xxx: Improve headset detection
tick: don't update idle time if cpu offline
qdsp6v2: Stereo Call Recording Support
Expose the option to user - CRC Checking (if disabled performance could increase up to 30%)
A couple of ramdisk tweaks
Booted right up UN7. Quick question...all 4 cores stay online all the time, is that supposed to be that way? Last kernel I was running the cores would go offline/online depending on "usage"
It shouldn't, clear cache of kernel Adiutor, im adding support to a better app for this kernel. Will upload later.
Please let me know if the cpu cores goes back to nornal
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
Features
I/O Schedulers (these were actually added in upstream kernel source)
BFQ
CFQ
DEADLINE
FIOPS
NOOP
ROW [DEFAULT]
ZEN
CPU hotplugs: intelli_plug (ENABLED BY DEFAULT)
CPU thermal control: intellithermal (ENABLED BY DEFAULT)
Governors
conservative
elementalX
intelliactive
interactive
ondemand
powersave
performance
zzmoove [DEFAULT, profile: 3 (ybatext)]
CPU
Support for Multi-Core Power Saving, reduce CPU usage (available in CPU tab of Kernel Adiutor).
Reduced CPU Average-Load drastically (Less CPU-Load=Cool Device=More Battery-Life).
Support userspace CPU voltage controlling
GPU
Support for Adreno Idler algorithm, reduce high GPU frequencies usage for better battery performance
Support for Simple GPU Algorithm
Memory
Support for Adaptive Low Memory Killer (ALMK) (kill any process that cause thrashing scenario)
Support for Kernel Samepage Merging (KSM).
Support for zRAM compression algorithm (updated to upstream Linux 4.8)
Support for LZ4HC (LZ4 high-compression rate) compression algorithm for zRAM
Other tweaks and optimizations
Init.d support
Support Faux Sound Control (use Faux Sound app to set audio gain profiles)
Optimized Integer SQRT. for upto 3x faster operation.
OVERCLOCKED CPU to 2,5GHz
Westwood TCP congestion algorithm (small boost on network speed)
Hacked swappiness up to 200 by using hacks from Samsung kernel sources (default swappiness is 130)
SELinux Permissive (for V4A and etc...)
Disabled some battery-hogging WAKELOCKS
Support zswap for better memory compression
XDA:DevDB Information
RZ Kernel for Sony Xperia Z1 (honami), Kernel for the Sony Xperia Z1
Contributors
remilia15, SuperLamic
Source Code: https://github.com/remilia15/android_kernel_sony_msm8974
Kernel Special Features:
Version Information
Status: Testing
Created 2018-04-04
Last Updated 2018-09-14
Download link: Drive
CHANGELOG
v1.0: Initial release
v1.5: Post #11
v2.0: Post #17
v2.5:
Post #48
Support for stock 14.6.A.1.368: Post #52
v3.0: Post #97
v4.0 [FINAL]: Post #147
Small notes
The kernel is tested on C6902/C6903/C6906 model. Not sure about other Z1 variants (don't confuse with Z1c). Testers are welcome
As written in the thread name, make sure you're on ROMs mentioned in the thread name. Please report if other ROMs work with this kernel
The kernel is based on @SuperLamic's msm8974 kernel source, and other features were cherry-picked from other sources as well. Original credits goes to them
For dt2w, tap 2 fingers at once on your touchscreen (as mentioned in Modified-kernel thread)
Reserved for future usage
Twrp included ?
Any plans for oreo version?
Is it possible to disable dt2w?
I remember way back it was usually done by modifying a file like
echo "1" > /sys/android_touch/ *some dt2w file*
iga64828 said:
Twrp included ?
Click to expand...
Click to collapse
Well, you have to install it separately through FlashTool
pokepokepoke said:
Any plans for oreo version?
Click to expand...
Click to collapse
Maybe, after Oreo gone stable
SUPERUSER said:
Is it possible to disable dt2w?
I remember way back it was usually done by modifying a file like
echo "1" > /sys/android_touch/ *some dt2w file*
Click to expand...
Click to collapse
You can disable it from Kernel Adiutor -> Wake -> DoubleTap2Wake
Or sysfs way:
Code:
echo 0 > /sys/class/input/input1/wakeup_gesture
Sent from my Xperia Z1 using XDA Labs
nice set of features,,,, gonna give it a test
remilia15 said:
The kernel is tested on C6902/C6903 model. Not sure about other Z1 variants (don't confuse with Z1c). Testers are welcome
As written in the thread name, make sure you're on LineageOS 14.1. I haven't tested other N ROMs yet. Please report if other ROMs work with this kernel
The kernel is based on @SuperLamic's msm8974 kernel source, and other features were cherry-picked from other sources. Original credits goes to them
For dt2w, tap 2 fingers at once on your touchscreen (as mentioned in Modified-kernel thread)
Click to expand...
Click to collapse
Bootloops on RR Nougat 7.1.2 (yeah yeah yeah, read the disclaimer on support for other ROMS, just curious to test this kernel). Strange but offline charging works as expected and even booting into TWRP works. But while in TWRP I notice the device temperature begins to rise rapidly, causing it to reboot,,,,,hope this works in future releases. Device: C6902
RZ v1.5 is up! Changes
Implemented power efficient workqueues (thanks to franciscofranco)
Disabled DT2W by default
Enabled multi-core power saving by default
Reverted GPU OC, obviously because it doesn't do anything
Built with UBERTC 4.9
Disabled battery-hogging wakelocks (thanks to franciscofranco)
Enabled intelli_plug and intellithermal by default (you'll need to disable mpdecision from Kernel Adiutor so intelli_plug will work properly)
RZ v1.5 is available on my Drive folder. Please checkout OP for download link!
Cheers,
Confirmed working with latest Carbon N ?
Sent from my Xperia Z1 using XDA Labs
Good work on my c6903 LOS 14.1 SuperLamic.
Nice work. It's working fine on my C6906 running LOS 14.1 from SuperLamic with Magisk installed and working fine too. My phone was charging too slow but now it's fixed.
Hello, remilia15.
Thank you for your work.
This kernel is flash like update.zip in trwp recovery?
Seand1796 said:
Hello, remilia15.
Thank you for your work.
This kernel is flash like update.zip in trwp recovery?
Click to expand...
Click to collapse
Yes, the kernel is packed inside a flashable ZIP, so just flash it through TWRP
RZ v2.0 is up! Changes
Added support for userspace voltage controller (available in Kernel Adiutor)
Added support for Adreno Idler (reduce high GPU frequencies usage due to msm-adreno-tz overhead), and Simple GPU algorithm
Added governors: zzmoove [DEFAULT], elementalX
Disabled mpdecision and thermanager by default (through my own ramdisk implementation, may support other ROMs for sure, as confirmed with Carbon N and LOS N)
Added support for zswap (ported from Samsung msm8974 kernel source)
Added IO schedulers: zen, fiops (default is still ROW)
Added 100MHz GPU step (should reduce battery consumption on light usage)
Added support for Dynamic Fsync (disabled by default), powersuspend driver (default: HYBRID mode)
Reduced CPU standby voltage
Fixed dt2w deep sleep state (it should function properly now)
RZ v2.0 is available on my Drive folder. Please checkout OP for download link!
remilia15 said:
RZ v2.0 is up! Changes
Added support for userspace voltage controller (available in Kernel Adiutor)
Added support for Adreno Idler (reduce high GPU frequencies usage due to msm-adreno-tz overhead), and Simple GPU algorithm
Added governors: zzmoove [DEFAULT], elementalX
Disabled mpdecision and thermanager by default (through my own ramdisk implementation, may support other ROMs for sure, as confirmed with Carbon N and LOS N)
Added support for zswap (ported from Samsung msm8974 kernel source)
Added IO schedulers: zen, fiops (default is still ROW)
Added 100MHz GPU step (should reduce battery consumption on light usage)
Added support for Dynamic Fsync (disabled by default), powersuspend driver (default: HYBRID mode)
Reduced CPU standby voltage
Fixed dt2w deep sleep state (it should function properly now)
RZ v2.0 is available on my Drive folder. Please checkout OP for download link!
Click to expand...
Click to collapse
Hi
thanks for your works buddy
can u make kernel for other roms like RR too?
u can use anykernel :fingers-crossed:
Luncer said:
Hi
thanks for your works buddy
can u make kernel for other roms like RR too?
u can use anykernel :fingers-crossed:
Click to expand...
Click to collapse
I'm using the very first version of AnyKernel with very minimal patching commands
Somehow it's pretty hard for me to adapt to a newer AK version so I decided to write my own noob-friendly ramdisk patching script instead (compatible with all Z1 AOSP boot.img)
My kernel boots currently on LOS N and Carbon N. For RR, idk why it bootloops. Probably need some other kernel commits maybe?
Sent from my Xperia Z1 using XDA Labs
Runs nice..but I needed to flash the stock kernel from superlamic lineage os and then flash this kernel because the phone went in to a bootloop on the sony logo.
Just a reminder to what to do when your next update is coming
edit: no its magisk thats acting up.. wont't boot when installing this after flashing the kernel
Phone is booting with magisk on stock kernel so something is not right.
I don't have more time atm for this so im gonna let it be
[KERNEL][OC/UC/UV] ꓘⓄ - 4.7.1 [DragonTC 8.0 + Linaro 7.3][.147 + 6.2.r1-10500][EOL]
ꓘⓄ KernelEOL NO MORE UPDATES (exams) FLASH ANY OTHER KERNEL
Telegram DISCUSSION & TESTING GROUP
General Improvements:
Built with DragonTC 8.0 and Linaro 7.3 gcc
Always up to date with Linux stable and latest CAF tag
CPU & GPU Improvements:
Overclocked Big cluster to 2.3Ghz and Little to 1.9Ghz
Underclocked Big and little to 300mhz
Undervolted and voltages adjusted
Several CPU Governors available - Chill, Alucard, Nightmare, Ironactive, Cultivation, Impulse, ZZMoove big.LITTLE Edition, Blu active, Tripndroid, Cafactive
Adreno Idler and Adrenoboost available
Network improvements:
Implemented Wireguard VPN support usable with Azire VPN
Enhanced TCP methods - cubic, westwood, vegas, scalable, CHINA, Agile-SD, many more
I/O improvements:
Several I/O control tweaks
Added schedulers - Maple, Zen, Vr, Tripndroid, Sioplus, SIO, FIOPS, Fifo
Adaptive LMK
Added UKSM
Dynamic FileSync toggle
Disabled I/O CRC check for more performance
Screen Improvements:
sRGB and KCAL - Advanced color control for Qualcomm MDSS v2 (RGB calibration and post-processing features)
Backlight dimmer for lower minimum brightness
Battery improvements:
USB Fast Charge
Boeffla Wakelock blocker available
Miscellaneous improvements:
Vibrator Strength tunable
Added Nav Bar gesture
Much more, refer git
DOWNLOADS
XDA:DevDB Information
ꓘⓄ Kernel, Kernel for the Asus ZenFone Max Pro M1
Contributors
Sudeep Duhoon
Source Code: https://github.com/SudeepDuhoon/KO.git
Kernel Special Features: Always up to date with linux stable and caf sources, feature rich and stable
Version Information
Status: Stable
Created 2018-07-18
Last Updated 2018-08-16
ChangeLogs :-
v4.7
nu time to update changelogs sry
flash and feel the difference
v4.0
Check github
v2.5
Merged .141 & .142
Merged LA.UM.6.2.r2-04700
Permissive denials logging disabled
Enable core control
Adrenoboost:conservative governor
Allow 320K AAC encoding
Powersuspend PM kernel driver
Gentle fair sleepers disabled by default
State notifier updates and switch removed
TCP congestion algorithm: CHINA & Agile-SD
Governor: Cafactive
Slow charging fix? (test)
Lot more under the hood changes and improvements
v2-
1. Merged .141
2. CPU governors added:-
Chill
Interactive (additions)
Add Support to Display State
Add powersave bias tunable
Add screen off max frequency tunable
3. Fixed min frequency of Little cluster stuck at 1536
4. CRC Check toggle
5. Added KSM, UKSM
6. Added Nav Bar gesture
7. Added Simple GPU Algorithm.
8. Added CAKE packet scheduler
9. Disabled adreno idler by default
10. LZ4 compressor updates
11. O3 Optimizations
12. Turned off Core Control Hotplug and Performance Hotplug (testing)
13. Updated anykernel2
v1-
1. Merged .140
2. Latest CAF Tag
3. CPU governors:-
alucard, nightmare, ironactive, cultivation, impulse, ZZMoove big.LITTLE Edition, blu active, tripndroid.
4. I/O Scheduler:-
Maple, zen, vr, tripndroid, sioplus, SIO, FIOPS, fifo.
5. TCP congestion algorithms:-
cubic, westwood, vegas, scalable.
6. CRC Check disabled (toggle from next build)
7. State Notifier (enabled by default)
8. WakeLock Toggles
9. KCAL Control
10. Arch Power
11. Arch Capacity
12. Gentle Fair Sleepers
13. Powersuspend
14. Enable FP Boost (testing needed)
15. Adreno Idler
16. Adreno Boost
17. CPU Wake Boost
18. Wireguard Support
19. Boeffla WakeLock Blocker
20. Fsync on/off support
21. USB fast charge
22. MSM Preserve Memory
23. File System Improvements
24. Better Decompression Performance
this kernel works only custom or both stock and customrom ?
savijaysalem said:
this kernel works only custom or both stock and customrom ?
Click to expand...
Click to collapse
both
Sudeep Duhoon said:
both
Click to expand...
Click to collapse
does/would usb otg work after flashing this? see my post here. thanks for any help.
This kernel has increased my mobile's memory management score on DOT OS
Steps to flash !!
anandushari said:
Steps to flash !!
Click to expand...
Click to collapse
Download kernel zip ,flash in recovery , wipe cache/dalvik(not compulsory) , reboot
james11705 said:
Download kernel zip ,flash in recovery , wipe cache/dalvik(not compulsory) , reboot
Click to expand...
Click to collapse
do root is required or not
anandushari said:
do root is required or not
Click to expand...
Click to collapse
No , but u need to unlock ur bootloader and flash a custom recovery like twrp or red Wolf , before flashing this zip.
I do not understand half of the things listed in the improvements. However, something caught my attention: USB Fast Charge. Does this means the phone will support fast charging once this kernel is flashed?
After installing. My phone is asking to format sd card and shows currpted. Rebooted and clear dalvik cache same error back to stock kernel. Using stock rom 316
Update 2.5
Merged .141 & .142
Merged LA.UM.6.2.r2-04700
Permissive denials logging disabled
Enable core control
Adrenoboost:conservative governor
Allow 320K AAC encoding
Powersuspend PM kernel driver
Gentle fair sleepers disabled by default
State notifier updates and switch removed
TCP congestion algorithm: CHINA & Agile-SD
Governor: Cafactive
Slow charging fix? (test)
Lot more under the hood changes and improvements
Aftab_khatri said:
After installing. My phone is asking to format sd card and shows currpted. Rebooted and clear dalvik cache same error back to stock kernel. Using stock rom 316
Click to expand...
Click to collapse
send boot time log
don't wipe anything, just reboot
are you using xposed module?
abubin said:
I do not understand half of the things listed in the improvements. However, something caught my attention: USB Fast Charge. Does this means the phone will support fast charging once this kernel is flashed?
Click to expand...
Click to collapse
through USB 3 port, yes
Dumb question.
How should I use boeffla wake lock blocker
Dt2w support?
Sent from my G5 SE using XDA Labs
Sudeep Duhoon said:
send boot time log
don't wipe anything, just reboot
are you using xposed module?
Click to expand...
Click to collapse
How to take log ? And no i don't use xpose its battery hog and makes.device laggy
Is it possible that we get WiFi 5ghz band as the SoC supports it? And also what about Qualcomm quick charge?
How fast does it charge? 3000mA at 4V? Or even more?
=DRAGONHEART KERNEL=
Your warranty is now void!
We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you
Features:
Linux upstream: 3.18.140
CAF & Prima upstream: LA.UM.7.6.r1-05500-89xx.0
• KCAL color control
• Vibration intensity control
• Sound gain control
• Audio codec quality improved
• exFAT Support
• NTFS support
• F2FS support
• SquahFS support
• CIFS/SMB support
• Added CPU Hotplug (default disabled)
• Set lz4 for better zram work
• Boeffla wakelock blocker
• Added defaults rules for Boeffla wakelock blocker
• Disable vendor verify and set no verity
• CRC32: disable by default & enable toogle (average 30% I/O performance profit)
• Few patches from Franco kernel (disabled a lot of debugging stuff)
• Fsync: on/off support
• Battery deep optimisation: undervolt & additional tweaks
• Added Adreno Real Idler (supported turning it on/off)
• Improved interactive governor (patch from Franco kernel)
• Improved CPU boost, default is disabled (patch from Franco kernel)
• Improved conservative governor (patch from Franco kernel)
• I/O schedulers: noop, deadline, bfq, cfq (default), sio, fiops, maple, tripndroid, zen, anxiety, sioplus, fifo, v(r)
• Added CPU governors: darkness, zzmoove, relax, impulse, electron, nonconservative, lionheart, clarity, blu_active, yankactive, intelliactive, conservativex, ondemandx, interactivex, bioshock, darknessv5, alucard, smartmax_eps, pegasusq, lionfish, hyper, despair, barry_allen, xperience, alessa, chill, ondemandplus, ironactive, culvitation, tripndroid
• Added GPU governors: guardian, balanced, msm-adreno-plus
• TCP congestion algorithms: cubic, reno, westwood (default)
• Installer include fix for Wi-Fi SELinux permission
• Kernel installer also support custom ROMs
• GCam focus fix (thanks @teftel1608 and @33bca)
• GPU: clocks table reworked (lags free, performance grew). OC max gpu freq now is 725MHz
• Fix for goodix-fp gestures on stock (thanks to @artyom5613 & @Broomber)
• Also in the v1 installer included fix fpc-fp gestures for the customs rom
Now gestures for both fingerprints is are:
* swipe2right - paste text
* others like in rom's setting
(if you not like this - change it in the /system/usr/keylayout/uinput-*.kl)
• Memory & battery life optimization due config settings for kernel
• Added a block to wakelock from wifi
• I/O optimization
• Added WireGuard 0.0.20190601
• Hide unlocked bootloader state (for apps like bank clients etc)
• Patches from Franco "mido" kernel for battery life improvement
• Added gpu Adreno simple algorithm (beast!!)
• Found a reason for which the CPU could for a long time not to raise the frequency to the maximum, it's all in the file /vendor/etc/thermal-engine.conf
See samples how to improve situation
• Compiled with GCC 9.1.0, which gave an increase in performance and speed of the kernel
• Reworked undervolting, battery lives even longer
• Added voltage control
• Maximum CPU frequency is now 2.4GHz
• EUOC version has a maximum GPU frequency of 750MHz
• added support for display status for CPU Hotplug & some schedulers
• all schedulers that have display status support:
alucard, chill, clarity, cultivation, darkness, electron, impulse, intelliactive, ironactive, nightmare, relaxed, anxiety-iosched and maple-iosched
• added drivers for few USB-Ethernet adapters
• added nightmare and dancedance CPU governors
• updated version with 2.2GHz overclocking
• removed the patch for hiding the bootloader state (there are more problems than good with it)
• new preset in installer for a smooth interface (applied for GSI only)
- DT2W fix for fts_ts [default disabled] (thanks @33bca) * tested on customs and GSIs. for latest maybe need to enable "Handwave gesture" in "Phh Treble Settings" > "Doze features" * #TODO
- Installer include Magisk preserve #TODO
<< DragonHeart v3.3 || DragonHeart v2.2 >>
undervolted (U) lower voltage for decrease overheat. also incredible battery saving
overclocked (OC) CPU max frequency is 2.4GHz, GPU max frequency is 725MHz
extra-overclocked (E) GPU max frequency is 750MHz (if you will face with graphical glitches - don't use it!)
Installations:
Backup boot.img, /system/lib/modules, /system/usr/keylayout and /vendor/lib/modules folders, /vendor/bin/init.qcom.post_boot.sh file if you want to go back
Flash Zip file with any TWRP recovery, wipe Dalvik cache, reboot and enjoy ^_^
Notice: if you have Magisk with modules installed maybe you'll get bootloop.
If you have Magisk don't need reinstall it after kernel because installer will save Magisk #TODO
Right way: if you have Magisk and modules - deinstall all. Then flash stock boot.img, then custom kernel, then other stuff like TWRP and Magisk.
Enough just dirty flashing kernel and then Magisk if you need it. All yours Magisk modules will preserved.
Issues:
- DT2W not work for fts_ts touchscreen
- tell me if find
XDA:DevDB Information
DragonHeart kernel for Xiaomi Mi A2 Lite "daisy"
Contributors:
eremitein
Source Code:
https://github.com/eremitein/xiaomi_kernel_msm8953_daisy_dragonheart
CREDITS:
All people, who made good code for this platform
Version Information
Status: Stable/Experimental
Release Date: 2019-06-13 (UTC +0)
Created: 2019-06-12
Last Updated: 2019-08-08
.
reserv
I will not help users if they are:
- using Magisk and moreover they installed modules;
- made any kernel settings (selected exotic governors, turned on hotplug and etc.);
- using option "Disable HW overlays";
- not sure that the same problems were not on the standard kernel
- not follow installation guide
All OC versions is always have CPU 2.2GHz
if not for you, then this is maybe if:
- you SoC/voltageregulator/phone doesn't support overclocking
- your device overheated due high outside temp or high load
- you system set restrictions to overclocking
.
also for oreo?
What are the differences between this and ButterFly kernel?
whats the difference between this and butterfly? changelog looks the same
Same butterfly only upsteam
How to change from butterfly kernel? Just dirty flash?
Henki98 said:
also for oreo?
Click to expand...
Click to collapse
never. this base have only pie kernel
Sonthaya said:
Same butterfly only upsteam
Click to expand...
Click to collapse
you right)
syukri95 said:
How to change from butterfly kernel? Just dirty flash?
Click to expand...
Click to collapse
yes
eremitein said:
I will not help users if they are:
- using Magisk and moreover they installed modules;
- made any kernel settings (selected exotic governors, turned on hotplug and etc.);
- using option "Disable HW overlays";
- not sure that the same problems were not on the standard kernel
- not read installation guide
All OC versions is always have CPU 2.2GHz
if not for you, then this is maybe if:
- you SoC/voltageregulator/phone doesn't support overclocking
- your device overheated due high outside temp or high load
- you system set restrictions to overclocking
.
Click to expand...
Click to collapse
OC versions always run at 2.2GHz or only when under load such as playing games? If it always run at 2.2GHz, will it hurts CPU in long term?
@Funk Wizard I'll request you to look into it due to violation of GPL license in a kernel thread and also Improper kernel commit history.
What is exactly the difference between this and Butterfly kernel? Furthermore, is it recommended only to flash this on a CAF-based rom? If so, can't we only flash it on the caf-based build of PE?
akkh99 said:
OC versions always run at 2.2GHz or only when under load such as playing games? If it always run at 2.2GHz, will it hurts CPU in long term?
Click to expand...
Click to collapse
i wrote "have"
not "run"
Veran125 said:
What is exactly the difference between this and Butterfly kernel? Furthermore, is it recommended only to flash this on a CAF-based rom? If so, can't we only flash it on the caf-based build of PE?
Click to expand...
Click to collapse
all kernels for daisy is always CAF
different is in base - this base is upstreamed CAF & linux, latest butterfly based on the legacy Xiaomi sources
Tell me if it is better than butterfly.
is wifi working in UV kernel? (DragonHeart-daisy-20190612-v1-U.zip)
akkh99 said:
OC versions always run at 2.2GHz or only when under load such as playing games? If it always run at 2.2GHz, will it hurts CPU in long term?
Click to expand...
Click to collapse
I'm have many temp is down to 1689
DarkFrenzy said:
is wifi working in UV kernel? (DragonHeart-daisy-20190612-v1-U.zip)
Click to expand...
Click to collapse
why you asked?)
all builds have working wifi
but some magisk modules may brick wifi on any kernels
@eremitein is it possible to add voltage control interface so we can control it ourselves in ie. Kernel Adiutor ?
Im on Piexl Experience and magisk installed with some modules installed like youtube vanced etc.
Can i just Dirty flash it or i should i follow some steps??
aerzjee said:
@eremitein is it possible to add voltage control interface so we can control it ourselves in ie. Kernel Adiutor ?
Click to expand...
Click to collapse
maybe in future...
now i don't have much free time for developing. and also my google build server is suspended (trial time is over), so i take pause for rest
the source codes of both of my kernels are available on the Github, anyone can take and use them on the basis of the GPL - learn how to build kernel, add functionality, modify and release(with saving all copy(left)rights in the code and publish it), build into the rom... you can get quick acquainted with the GPL here
CherryFarmer8 said:
Im on Piexl Experience and magisk installed with some modules installed like youtube vanced etc.
Can i just Dirty flash it or i should i follow some steps??
Click to expand...
Click to collapse
please, people, please - read first and third posts and you'll find all answers:angel: