I bought the Korean phone LU6200 but it does not work with my att sim card.... Can I make it work if I flash a ROM from the Nitro on the LU6200???
Could it be that the phone is locked to a carrier?
May be try this
Rodskape said:
I bought the Korean phone LU6200 but it does not work with my att sim card.... Can I make it work if I flash a ROM from the Nitro on the LU6200???
Click to expand...
Click to collapse
Can u check this thread: http://forum.xda-developers.com/showthread.php?t=2051590
But i would say go through the thread completely before proceeding.. do it at your own risk.. all the best
Specs for LU6200: http://www.gsmarena.com/lg_optimus_lte_lu6200-4188.php
It looks to be a cdma phone and the phone's frequency bands aren't supported by AT&T: http://en.wikipedia.org/wiki/Cellular_frequencies#United_States_Carrier_Frequency_Use
may be this will help
audit13 said:
Specs for LU6200: http://www.gsmarena.com/lg_optimus_lte_lu6200-4188.php
It looks to be a cdma phone and the phone's frequency bands aren't supported by AT&T: http://en.wikipedia.org/wiki/Cellular_frequencies#United_States_Carrier_Frequency_Use
Click to expand...
Click to collapse
Yes its a CMDA phone but also supports LTE and HSDPA. we have a big thread with options to install Canadian ROM:
http://forum.xda-developers.com/showthread.php?t=1472501
reddevil_sen said:
Yes its a CMDA phone but also supports LTE and HSDPA. we have a big thread with options to install Canadian ROM:
http://forum.xda-developers.com/showthread.php?t=1472501
Click to expand...
Click to collapse
Flashing the P930 rom will enable connecting to 3g networks in Canada and USA? That's nice:victory:
Related
Flashed my phone for the first time and now I dont have a signal for the radio... Shows unknown in the settings...
You flash a GSM rom for a CDMA device or vice versa?
sshede said:
You flash a GSM rom for a CDMA device or vice versa?
Click to expand...
Click to collapse
I flashed a cdma rom, which is correct as far as I know.... I use Telus in Canada
ajjohns2003 said:
I flashed a cdma rom, which is correct as far as I know.... I use Telus in Canada
Click to expand...
Click to collapse
wrong. you have a GSM phone.
Avoid the Sprint and Verizon development sections. Stick to the stock one and make sure the rom is GSM. CDMA is usually only for US (Sprint and VZW).
sshede said:
Avoid the Sprint and Verizon development sections. Stick to the stock one and make sure the rom is GSM. CDMA is usually only for US (Sprint and VZW).
Click to expand...
Click to collapse
About to try the GSM verion.... Thanks!
Anybody Able to flash the Sprint version to another cdma carrier?
Not possible.
snipestech said:
Anybody Able to flash the Sprint version to another cdma carrier?
Click to expand...
Click to collapse
which carrier do u want it on?
WiredPirate said:
Not possible.
Click to expand...
Click to collapse
Galaxy Nexus has a VIA chipset rather than the usual Qualcomm which made things more difficult... but in the end it is VERY possible to flash the device to ANY CDMA carrier in the world. http://forum.xda-developers.com/showthread.php?t=1696621
Hello,
I am using my Australian S3 4G model handset with VodaAu sim card, currently I am connected to AT&T and my reception is unstable, this is the same while using T-Mobile. I would like to flash my modem with a version that others on at&t are using to resolve my issues...
Will this help?
And which version?
Thanks,
Aussie abroad
GODSPD said:
Hello,
I am using my Australian S3 4G model handset with VodaAu sim card, currently I am connected to AT&T and my reception is unstable, this is the same while using T-Mobile. I would like to flash my modem with a version that others on at&t are using to resolve my issues...
Will this help?
And which version?
Thanks,
Aussie abroad
Click to expand...
Click to collapse
Some digging on my part suggests the phone you have is probably the i9305, not the i747. You might want to go over here to ask your question, look for modems, etc.
It is the i9305 gt model yes, but the modems should be the same?
GODSPD said:
It is the i9305 gt model yes, but the modems should be the same?
Click to expand...
Click to collapse
No. They are different phones.
Think like this.. 2 people named David.. lol
Hello.
I've got G Pro E988 Thailand version. Thailand firmware of E988 can't support 4G LTE. I'm currently live in Russia and I need LTE. I read Spec of E988 and it can support LTE 1800 / 2600. So, can I flash other countries' firmware and can I get LTE 1800 / 2600? For example CIS firmware or Hong Kong firmware for E988. If I can flash, please give me some instructions for that. Do I need to root and install CWM or TWRP recovery to flash these firmwares? My current condition is stock Rom and unrooted. Thanks.
sithuthantsin86 said:
Hello.
I've got G Pro E988 Thailand version. Thailand firmware of E988 can't support 4G LTE. I'm currently live in Russia and I need LTE. I read Spec of E988 and it can support LTE 1800 / 2600. So, can I flash other countries' firmware and can I get LTE 1800 / 2600? For example CIS firmware or Hong Kong firmware for E988. If I can flash, please give me some instructions for that. Do I need to root and install CWM or TWRP recovery to flash these firmwares? My current condition is stock Rom and unrooted. Thanks.
Click to expand...
Click to collapse
No LTE bands DONT rely on the firmware its hardware so you wont be getting LTE.
Same here i have the f240k vers ...
Lets hack this baby
Sent from my LG-F240K using xda app-developers app
scufutz said:
Same here i have the f240k vers ...
Lets hack this baby
Sent from my LG-F240K using xda app-developers app
Click to expand...
Click to collapse
Apparently ROMs based on CM for E980 working on Korean models.....you may want to try
http://forum.xda-developers.com/showthread.php?t=2432724
do report you experience :angel:
hyelton said:
No LTE bands DONT rely on the firmware its hardware so you wont be getting LTE.
Click to expand...
Click to collapse
Thanks for your reply hyelton! I asked to the LG Technical Support Center from Thailand and they answer me like that "Spec G Pro E988 can support 4G 1800/2600 but Thailand doesn't have firmware for support this version". So, I asked. I saw Pure Stock Rooted and debloated ROM here. Can I flash that Rom on my E988 Thailand Version? If I can flash, I think it can cause baseband problem. How can I flash my correct baseband?
Good afternoon, recently i bought a gs4 sgh m919 unlocked; i live in venezuela and 3g bands here operate at 900mhz, when i try to connect to 3g it says unable to connect try later, my cell can detect 3g but can`t connect Anyone can help me? :'(
Darkphyx said:
Good afternoon, recently i bought a gs4 sgh m919 unlocked; i live in venezuela and 3g bands here operate at 900mhz, when i try to connect to 3g it says unable to connect try later, my cell can detect 3g but can`t connect Anyone can help me? :'(
Click to expand...
Click to collapse
Afternoon. Hmm. I am on a different kernel and rom so I am doing this based of vague memory. First, go into your dialer, dial *#27663368378#. Then look for something along the lines of RF setttings or band preference. See if you can choose the 850/900MHz frequency. Forgive me if I'm not completely on the mark but it should be in the menu when you dial *#27663368378# :good:
89986586 317
xdapowerapps said:
Afternoon. Hmm. I am on a different kernel and rom so I am doing this based of vague memory. First, go into your dialer, dial *#27663368378#. Then look for something along the lines of RF setttings or band preference. See if you can choose the 850/900MHz frequency. Forgive me if I'm not completely on the mark but it should be in the menu when you dial *#27663368378# :good:
Click to expand...
Click to collapse
No this code doesn`t work i`ve tried *#2263# but when i try to select the 900 mhz wcdma band it doesn`t mark the [*] i have the JB 4.3 stock rom rooted
Darkphyx said:
No this code doesn`t work i`ve tried *#2263# but when i try to select the 900 mhz wcdma band it doesn`t mark the [*] i have the JB 4.3 stock rom rooted
Click to expand...
Click to collapse
You need to be 100% stock, non-rooted for it work properly.
xdapowerapps said:
You need to be 100% stock, non-rooted for it work properly.
Click to expand...
Click to collapse
Ok but i need JB 4.2.2 or JB 4.3? it works with *#4636# code? and you can enable this band on your phone?
Darkphyx said:
Ok but i need JB 4.2.2 or JB 4.3? it works with *#4636# code? and you can enable this band on your phone?
Click to expand...
Click to collapse
I have not tried this with JB 4.3. I have tried this on my JB 4.2.2 when I unlocked it. I had to be 100% stock, non-rooted for it to work. I can not say if *#4636# will work since I am not stock right now. The SGH-M919 allows the following bands:
LTE: Bands 1/2/4/5/7/17; HSPA+/UMTS: 850/AWS/1900/2100MHz; GSM: 850/900/1800/1900MHz
Click to expand...
Click to collapse
So yes, it does support those frequencies. As I said, go back to 100% stock through Odin (preferably to 4.2.2 if you currently have that, I do not know if it works on 4.3) and then dial the *#4636# code and set the frequency to the one you want. :fingers-crossed:
xdapowerapps said:
I have not tried this with JB 4.3. I have tried this on my JB 4.2.2 when I unlocked it. I had to be 100% stock, non-rooted for it to work. I can not say if *#4636# will work since I am not stock right now. The SGH-M919 allows the following bands:
So yes, it does support those frequencies. As I said, go back to 100% stock through Odin (preferably to 4.2.2 if you currently have that, I do not know if it works on 4.3) and then dial the *#4636# code and set the frequency to the one you want. :fingers-crossed:
Click to expand...
Click to collapse
But i wanna enable wcdma at 900mhz cause it only get edge, how can i downgrade to 4.2.2?
Darkphyx said:
But i wanna enable wcdma at 900mhz cause it only get edge, how can i downgrade to 4.2.2?
Click to expand...
Click to collapse
If you have 4.3 and you just bought the phone, I am going to assume you are on a 4.3 bootloader. I would recommend you Odin back to 100% stock 4.3 and run the code and choose your band. It is worth a shot. Try it!!