Good afternoon, recently i bought a gs4 sgh m919 unlocked; i live in venezuela and 3g bands here operate at 900mhz, when i try to connect to 3g it says unable to connect try later, my cell can detect 3g but can`t connect Anyone can help me? :'(
Darkphyx said:
Good afternoon, recently i bought a gs4 sgh m919 unlocked; i live in venezuela and 3g bands here operate at 900mhz, when i try to connect to 3g it says unable to connect try later, my cell can detect 3g but can`t connect Anyone can help me? :'(
Click to expand...
Click to collapse
Afternoon. Hmm. I am on a different kernel and rom so I am doing this based of vague memory. First, go into your dialer, dial *#27663368378#. Then look for something along the lines of RF setttings or band preference. See if you can choose the 850/900MHz frequency. Forgive me if I'm not completely on the mark but it should be in the menu when you dial *#27663368378# :good:
89986586 317
xdapowerapps said:
Afternoon. Hmm. I am on a different kernel and rom so I am doing this based of vague memory. First, go into your dialer, dial *#27663368378#. Then look for something along the lines of RF setttings or band preference. See if you can choose the 850/900MHz frequency. Forgive me if I'm not completely on the mark but it should be in the menu when you dial *#27663368378# :good:
Click to expand...
Click to collapse
No this code doesn`t work i`ve tried *#2263# but when i try to select the 900 mhz wcdma band it doesn`t mark the [*] i have the JB 4.3 stock rom rooted
Darkphyx said:
No this code doesn`t work i`ve tried *#2263# but when i try to select the 900 mhz wcdma band it doesn`t mark the [*] i have the JB 4.3 stock rom rooted
Click to expand...
Click to collapse
You need to be 100% stock, non-rooted for it work properly.
xdapowerapps said:
You need to be 100% stock, non-rooted for it work properly.
Click to expand...
Click to collapse
Ok but i need JB 4.2.2 or JB 4.3? it works with *#4636# code? and you can enable this band on your phone?
Darkphyx said:
Ok but i need JB 4.2.2 or JB 4.3? it works with *#4636# code? and you can enable this band on your phone?
Click to expand...
Click to collapse
I have not tried this with JB 4.3. I have tried this on my JB 4.2.2 when I unlocked it. I had to be 100% stock, non-rooted for it to work. I can not say if *#4636# will work since I am not stock right now. The SGH-M919 allows the following bands:
LTE: Bands 1/2/4/5/7/17; HSPA+/UMTS: 850/AWS/1900/2100MHz; GSM: 850/900/1800/1900MHz
Click to expand...
Click to collapse
So yes, it does support those frequencies. As I said, go back to 100% stock through Odin (preferably to 4.2.2 if you currently have that, I do not know if it works on 4.3) and then dial the *#4636# code and set the frequency to the one you want. :fingers-crossed:
xdapowerapps said:
I have not tried this with JB 4.3. I have tried this on my JB 4.2.2 when I unlocked it. I had to be 100% stock, non-rooted for it to work. I can not say if *#4636# will work since I am not stock right now. The SGH-M919 allows the following bands:
So yes, it does support those frequencies. As I said, go back to 100% stock through Odin (preferably to 4.2.2 if you currently have that, I do not know if it works on 4.3) and then dial the *#4636# code and set the frequency to the one you want. :fingers-crossed:
Click to expand...
Click to collapse
But i wanna enable wcdma at 900mhz cause it only get edge, how can i downgrade to 4.2.2?
Darkphyx said:
But i wanna enable wcdma at 900mhz cause it only get edge, how can i downgrade to 4.2.2?
Click to expand...
Click to collapse
If you have 4.3 and you just bought the phone, I am going to assume you are on a 4.3 bootloader. I would recommend you Odin back to 100% stock 4.3 and run the code and choose your band. It is worth a shot. Try it!!
Related
Hi I'm in Australia, and about to buy a Note 2 LTE. But there are two International models, namely the "N7105" and the "N7105T".
Does anyone know what the difference is, as I wouldn't want to get the wrong one.
I tried looking online, but to no avail
I know most 4G providers here run on LTE1800mHz (/B3?)
Any help would be REALLY appreciated!
The N7105 has three LTE bands: 800, 1800 and 2600 mHz
The N7105T has two LTE bands: 1800 and 2600. It doesn't have the 800 mHz band.
springer.music said:
The N7105 has three LTE bands: 800, 1800 and 2600 mHz
The N7105T has two LTE bands: 1800 and 2600. It doesn't have the 800 mHz band.
Click to expand...
Click to collapse
N7105 it is then, thanks man!
I'm on optus with thr N7105
Sent from my GT-N7105 using xda app-developers app
can the n7105t run n7105 roms?
Riimez said:
can the n7105t run n7105 roms?
Click to expand...
Click to collapse
Yes I guess. Only n7105 800Mhz cant work on n7105t Roms.
It looks like another difference is firmware.
I have the N7105T (from Telstra in Australia) and just rooted using the CF Auto Root package for the N7105. No problems there, but when I try and use Triangle Away it says "Cannot find hidden partition. Are you not using ICS?" I'm using 4.1.1 which came installed. I have heard of others with the T version having to flash the N7105 firmware, then Triangle Away works. I just hope that firmware isn't needed for anything important...
mugget said:
It looks like another difference is firmware.
I have the N7105T (from Telstra in Australia) and just rooted using the CF Auto Root package for the N7105. No problems there, but when I try and use Triangle Away it says "Cannot find hidden partition. Are you not using ICS?" I'm using 4.1.1 which came installed. I have heard of others with the T version having to flash the N7105 firmware, then Triangle Away works. I just hope that firmware isn't needed for anything important...
Click to expand...
Click to collapse
Hey mate. i just picked up my n7105t from telstra & i am wanting to root it straight away. Are you still having the "Cannot find hidden partition. Are you not using ICS?" issue? If not, how did you fix it?
I only just picked up the device from, waiting for the battery to reach its first full charge & then i'll root.
Hey vinpor - I have very good news for you! Triangle Away has been updated with support for GT-N7105T! I installed the update and tried to run TA again, no problems with the updated app, it's all sweet! (Although I have not verified the binary count myself... but I got to the point where I would rather have root, I don't care so much about warranty/binary etc. anymore.)
Hi all,
I too have the Telstra N7105T and would like to flash the N7105 Stock Rom to it.
Just wondering if this is a problem and where I can get a copy of the latest ROM for it
M0381U5
Hey M0381U5,
Give this a try: http://samsung-updates.com/device/?id=GT-N7105T
Never had to restore a stock ROM before... all the best!
Carrier Branded to Stock
Thanks for the link,
I am actually after the stock international ROM for the N7105,
which is on this link, thanks heaps
to put on my N7105T to kill the carrier bloat.
But also want to be sure that if this is even possible?
and the the Stock International ROM wont kill my specific N7105T
Thanks for your helps
Cheers
I have been using LiquidSmooth 4.2.2 for a little bit now, no problems at all. So I think you'd be fine using the stock international ROM. Just make sure you backup your important files (IMEI, NV, EFS) and get your recovery setup. Pretty hard to actually brick your phone unless you pull the battery while it's installing a ROM or something.
Hello folks!
I have a Rooted Canadian Carrier rogers galaxy note 2 i317M flashed with Clean ROM ACE 4.9.0 and running android 4.1.2....
Basically I want to sell it to a person who is going to use it on WIND MOBILE (AWS freq carrier)...and i have no idea if this is going to work with the hardware provided on the board or do i need to flash the wind modem to this phone.
below thread talks about US phones:
http://forum.xda-developers.com/showthread.php?p=34661189
not sure if this applies to me, i have seen local ppl doing it without a problem...
If someone had that experience (a step by step procedure) and would like to share this please do so, as I don't want to pay for the unlock but wanted to do it myself:fingers-crossed:
please let me know! :crying:
msiddiqu said:
Hello folks!
I have a Rooted Canadian Carrier rogers galaxy note 2 i317M flashed with Clean ROM ACE 4.9.0 and running android 4.1.2....
Basically I want to sell it to a person who is going to use it on WIND MOBILE (AWS freq carrier)...and i have no idea if this is going to work with the hardware provided on the board or do i need to flash the wind modem to this phone.
below thread talks about US phones:
http://forum.xda-developers.com/showthread.php?p=34661189
not sure if this applies to me, i have seen local ppl doing it without a problem...
If someone had that experience (a step by step procedure) and would like to share this please do so, as I don't want to pay for the unlock but wanted to do it myself:fingers-crossed:
please let me know! :crying:
Click to expand...
Click to collapse
Yes that unlock method works for us...
It is in a step by step format already.
thanks! but i don't see anyone reporting this working with AWS, does this method unlocks the phone to work with AWS freq like wind?
please advise.
msiddiqu said:
thanks! but i don't see anyone reporting this working with AWS, does this method unlocks the phone to work with AWS freq like wind?
please advise.
Click to expand...
Click to collapse
also it works on 4.1.1 at least but i have 4.1.2...looks like i have to downgrade it to stock 41.1 and then try this, what you suggest? i am using custom ROM clean ROM ACE 4.9 (4.1.2).
msiddiqu said:
also it works on 4.1.1 at least but i have 4.1.2...looks like i have to downgrade it to stock 41.1 and then try this, what you suggest? i am using custom ROM clean ROM ACE 4.9 (4.1.2).
Click to expand...
Click to collapse
No it depends on your radio, not the version.
Like it says, at least this version, it doesn't say only this version.
Try it, if not just flash an earlier radio for your carrier, and then flash back if you like
crixley said:
No it depends on your radio, not the version.
Like it says, at least this version, it doesn't say only this version.
Try it, if not just flash an earlier radio for your carrier, and then flash back if you like
Click to expand...
Click to collapse
are baseband same as radio version?if yes I am running MVLBMA3, i found this:
http://stockroms.net/file/GalaxyNote2/SGH-I317M
please assist which one should I try
msiddiqu said:
are baseband same as radio version?if yes I am running MVLBMA3, i found this:
http://stockroms.net/file/GalaxyNote2/SGH-I317M
please assist which one should I try
Click to expand...
Click to collapse
Yes...
Why not try it on the one you have now??
This is what I'm confused on.. If it doesn't work flash the older canadian radio from the development thread
crixley said:
Yes...
Why not try it on the one you have now??
This is what I'm confused on.. If it doesn't work flash the older canadian radio from the development thread
Click to expand...
Click to collapse
I already tried dude, but I am missing [4] NW Lock NV Data INITIALLIZ in the options...may be i dont need to flash stock ROM but just a previous baseband (as you mentioned), that would be fantastic if I just rollback the radio version only and keeping the firmware, please guide me to the sections you are referring to.
msiddiqu said:
I already tried dude, but I am missing [4] NW Lock NV Data INITIALLIZ in the options...may be i dont need to flash stock ROM but just a previous baseband (as you mentioned), that would be fantastic if I just rollback the radio version only and keeping the firmware, please guide me to the sections you are referring to.
Click to expand...
Click to collapse
HTML:
http://d-h.st/rJq
older!
HTML:
http://d-h.st/nMw
newer!
flash the older radio, then unlock, then flash back!
Please read forum rules before posting
Questions and Help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
crixley said:
HTML:
http://d-h.st/rJq
older!
HTML:
http://d-h.st/nMw
newer!
flash the older radio, then unlock, then flash back!
Click to expand...
Click to collapse
thank you so much!, i downgraded the modem firmware and the option appeared, followed the instruction in the thread...it says its unlocked, now i just have to use a wind mobile nano sim to test this...will update this thread.!
thanks a bunch!
msiddiqu said:
thank you so much!, i downgraded the modem firmware and the option appeared, followed the instruction in the thread...it says its unlocked, now i just have to use a wind mobile nano sim to test this...will update this thread.!
thanks a bunch!
Click to expand...
Click to collapse
Glad it worked for you!
If you have issues with the wind SIM, there is a thread on here about using the bands for tmobile
msiddiqu said:
thank you so much!, i downgraded the modem firmware and the option appeared, followed the instruction in the thread...it says its unlocked, now i just have to use a wind mobile nano sim to test this...will update this thread.!
thanks a bunch!
Click to expand...
Click to collapse
Unlocking a Rogers Note 2 doesn't mean it will work on Wind Mobile. You will need to unlock AWS band (after you unlocked the phone). I'm actually surprised that no one mentioned this thread as it's been around for at least 8 months now.
Use the thread to unlock your Note 2 to work with Wind or Mobicity.
Thats exactly what is happening. ..it looks unlcoked but not working on wind I already tested a wind sim...would you please guid me to the link that does this aws band unlock for my note 2...
Appreciated!
Sent from my SGH-I317M using Tapatalk 4
Check the link below.
http://forum.xda-developers.com/showthread.php?t=2068041
Working
ruinkhan said:
Unlocking a Rogers Note 2 doesn't mean it will work on Wind Mobile. You will need to unlock AWS band (after you unlocked the phone). I'm actually surprised that no one mentioned this thread as it's been around for at least 8 months now.
Use the thread to unlock your Note 2 to work with Wind or Mobicity.
Click to expand...
Click to collapse
Thanks all for the support, my phone has been unlocked and working fine on WIND (AWS freq unlocked)...!:laugh:
I bought the Korean phone LU6200 but it does not work with my att sim card.... Can I make it work if I flash a ROM from the Nitro on the LU6200???
Could it be that the phone is locked to a carrier?
May be try this
Rodskape said:
I bought the Korean phone LU6200 but it does not work with my att sim card.... Can I make it work if I flash a ROM from the Nitro on the LU6200???
Click to expand...
Click to collapse
Can u check this thread: http://forum.xda-developers.com/showthread.php?t=2051590
But i would say go through the thread completely before proceeding.. do it at your own risk.. all the best
Specs for LU6200: http://www.gsmarena.com/lg_optimus_lte_lu6200-4188.php
It looks to be a cdma phone and the phone's frequency bands aren't supported by AT&T: http://en.wikipedia.org/wiki/Cellular_frequencies#United_States_Carrier_Frequency_Use
may be this will help
audit13 said:
Specs for LU6200: http://www.gsmarena.com/lg_optimus_lte_lu6200-4188.php
It looks to be a cdma phone and the phone's frequency bands aren't supported by AT&T: http://en.wikipedia.org/wiki/Cellular_frequencies#United_States_Carrier_Frequency_Use
Click to expand...
Click to collapse
Yes its a CMDA phone but also supports LTE and HSDPA. we have a big thread with options to install Canadian ROM:
http://forum.xda-developers.com/showthread.php?t=1472501
reddevil_sen said:
Yes its a CMDA phone but also supports LTE and HSDPA. we have a big thread with options to install Canadian ROM:
http://forum.xda-developers.com/showthread.php?t=1472501
Click to expand...
Click to collapse
Flashing the P930 rom will enable connecting to 3g networks in Canada and USA? That's nice:victory:
Hey
i have installed 4G rom on my device P601 (3G model)
i try to make a call and receive one and its worked ..
but when i try to enable the 3G data it doesnt work at all
any solution ?
DocFreeDom said:
Hey
i have installed 4G rom on my device P601 (3G model)
i try to make a call and receive one and its worked ..
but when i try to enable the 3G data it doesnt work at all
any solution ?
Click to expand...
Click to collapse
S-800 (LTE) devices have Qualcomm modems. Exynos devices have Motorola modems. The radio s/w you installed with the LTE ROM isn't compatible with your 3G radio. That's why it's borked.
BarryH_GEG said:
S-800 (LTE) devices have Qualcomm modems. Exynos devices have Motorola modems. The radio s/w you installed with the LTE ROM isn't compatible with your 3G radio. That's why it's borked.
Click to expand...
Click to collapse
hmm if the modem not compatible then why calling function is working ?
and there is no way to solve this problem ?
DocFreeDom said:
hmm if the modem not compatible then why calling function is working ?
and there is no way to solve this problem ?
Click to expand...
Click to collapse
I have no idea why calling's working. The way to solve the problem is going back to a P-601 ROM. Throughout XDA they are posts from people that have borked their devices using Wi-Fi, 3G, or LTE ROMs interchangeably. They aren't interchangeable.
BarryH_GEG said:
I have no idea why calling's working. The way to solve the problem is going back to a P-601 ROM. Throughout XDA they are posts from people that have borked their devices using Wi-Fi, 3G, or LTE ROMs interchangeably. They aren't interchangeable.
Click to expand...
Click to collapse
ok thanks for info
DocFreeDom said:
Hey
i have installed 4G rom on my device P601 (3G model)
i try to make a call and receive one and its worked ..
but when i try to enable the 3G data it doesnt work at all
any solution ?
Click to expand...
Click to collapse
create a new access point without any proxy and port..
try any type of authentications type..
and in the Bearer you can see these options:
LTE
eHRPD
Unspecified..
this time try eHRPD... it should work
Its a sprint s3 from FreedomPop with their weird rom. Can I use this phone on another carrier? Do I need to flash a different firmware or ROM?
what is the model number? Should say under the battery
The model for it is SPH-L710.
teknoweanie said:
The model for it is SPH-L710.
Click to expand...
Click to collapse
rwilco.com has some solid links for the tar.md5s. I bought a prepaid sch-i545 (verizon s4) and it had its own weird rom for it, even said a different build # in the about phone section. I flashed the stock i545 rom in odin and its now a regular vzw S4. The same will likely hold true for the L710
heres the link, you can pick your poison http://rwilco12.com/downloads.php?dir=Files/Devices/Samsung Galaxy S3 (SPH-L710)/Stock ROMs
Do I use Odin to flash it?
teknoweanie said:
Do I use Odin to flash it?
Click to expand...
Click to collapse
You use Odin to flash tar.md5s and recovery to flash zips
Phone works perfectly now. Flashed nj2 with Odin. Then flashed a recovery and wicked s5 2.2. thanks.
You're welcome! Be sure to hit thanks for those who helped!
are you able to get LTE with the aicp ROM also on the wicked s5 2.2 when it says 4g does that mean LTE? Also I'm trying to get one of the roms working on the sprint mnvo Iwireless.
teknoweanie said:
are you able to get LTE with the aicp ROM also on the wicked s5 2.2 when it says 4g does that mean LTE? Also I'm trying to get one of the roms working on the sprint mnvo Iwireless.
Click to expand...
Click to collapse
Yes, the 4g icon does mean LTE. I'm running a ROM that my friend compiled and where I live there isn't sprint LTE and I'm using a at&t sim in my phone
Is there a APN fix or something to get LTE working for aicp? So far its my favorite other than only 3g data working. Also if I switch to LTE it says in the sim status that voice and data are lte. Just no mobile connection.
teknoweanie said:
Is there a APN fix or something to get LTE working for aicp? So far its my favorite other than only 3g data working. Also if I switch to LTE it says in the sim status that voice and data are lte. Just no mobile connection.
Click to expand...
Click to collapse
Try the apnmanager app
From the play store? Doesn't seem to want to start. It just crashes.
teknoweanie said:
From the play store? Doesn't seem to want to start. It just crashes.
Click to expand...
Click to collapse
Refresh my memory, are you running LP or mm?
Right now I am using aicp mm. Only problem with it is occasional lag and the lte not working. What Rom did/do you use?
Thanks for the awesome help. I think I'm sticking with wicked s5 2.2 for now. It looks like it just seems to work and has the added bonus of being able to over clock and underclock a little. Ran into a few annoying bugs in aicp that's known but not fixed yet. (No 4g and forced into speaker phone)
teknoweanie said:
Thanks for the awesome help. I think I'm sticking with wicked s5 2.2 for now. It looks like it just seems to work and has the added bonus of being able to over clock and underclock a little. Ran into a few annoying bugs in aicp that's known but not fixed yet. (No 4g and forced into speaker phone)
Click to expand...
Click to collapse
Oh, no problem. Sorry for the delay here, but 4g should work on aicp. What baseband are you on?
Baseband is Nj2
teknoweanie said:
Baseband is Nj2
Click to expand...
Click to collapse
I'm on nd8 and I don't have any issues flashing any rom or weirdness with features not working. My daily driver is a g900p and the same issue with the most recent baseband exists there too. I'll drag my L710 out and see what's what on it. Gonna be a lil bit tho. Household stuff to attend to
oops, im on MK3!! Ive run tons of ROMs on this baseband and havent ever had an issue. I dont have sprint LTE where i live, but ive been to places where there is sprint LTE and this baseband/modem/radio version has worked perfectly. The newest baseband isnt always best
there are many posts saying exactly what you said. Just they said nj2 was working fine and ah1 baseband doesn't work well. Also I'm not sure if you can downgrade firmware after mk something.