Hay can you help me how I screwed tel. I wanted to drKetan Multitool adwance flas new kernel persius I chose this kernel perzius and when I went after the procedure I only marks skip everything and install kernel then it happened the phone has just started and it said samsung black screen and then I reset the recovery but it did not have a touch Philz, I now have nothing and I only have the option reebot system now, applay update from ADB, applay update from external storage, wipe data / factory reset, wipe cache partition and apply update from cache. I've tried install the new rom but when I go to applay Udate from external storage and choose the rom write me only
e: Failde to verify whole-file signature
P.S. I added a picture
if anyone can help me would be happy oodin I've tried to install a stock rom when I press the start waiting and possible signs get pit for mapping and that's all what I can do to
odin help
Hay can you help me how I screwed tel. I wanted to drKetan Multitool adwance flas new kernel persius I chose this kernel perzius and when I went after the procedure I only marks skip everything and install kernel then it happened the phone has just started and it said samsung black screen and then I reset the recovery but it did not have a touch Philz, I now have nothing and I only have the option reebot system now, applay update from ADB, applay update from external storage, wipe data / factory reset, wipe cache partition and apply update from cache. I've tried install the new rom but when I go to applay Udate from external storage and choose the rom write me only
e: Failde to verify whole-file signature
P.S. I added a picture
if anyone can help me would be happy oodin I've tried to install a stock rom when I press the start waiting and possible signs get pit for mapping and that's all what I can do to
flash cwm to your mobile by searching through google (be carefull)
and then turn signature verification off and flash this file
---------- Post added at 08:04 AM ---------- Previous post was at 08:01 AM ----------
flash cwm to your mobile by searching through google (be carefull)
and then turn signature verification off and flash this file
hay can you if you do not have a little bit more difficult to explain what I do I am a beginner in this
flash CWM to your mobile by searching through google (be carefull)
and then turn off signature verification and flash this file
eduka said:
hay can you if you do not have a little bit more difficult to explain what I do I am a beginner in this
flash CWM to your mobile by searching through google (be carefull)
and then turn off signature verification and flash this file
Click to expand...
Click to collapse
I've tried install CWM recovery but we captions Failde veritifacion then I tried to Odin 3:07 comes to pit mapping and again nothing
eduka said:
I've tried install CWM recovery but we captions Failde veritifacion then I tried to Odin 3:07 comes to pit mapping and again nothing
Click to expand...
Click to collapse
Hi
First lets get you on a proper recover:
Go here http://forum.xda-developers.com/showthread.php?t=2000138 and download the right version. I would suggest using CWM_RecoveryTOUCH_v6.0.3.0_N7100.zip. Download that and then copy that to your ext sdcard. then put the sdcard back in you phone and then boot back into recovery and then flash the new recovery from ext sdcard. Reboot and profit!! :highfive:
If that do not work, get this file ODIN-KashaMalagaTOUCHCWMRecovery-V6.0.3.0.zip from same thread and flash that through ODIN.
reboot annnnd Profit!! :highfive:
Now that you are on propper recovery you can flash anything.. Happy Flashing!!
Ps: DO A BACKUP OF EFS PARTITION!!! I am not JOKING! IT CAN SAVE your Phone! http://forum.xda-developers.com/showthread.php?t=2389426 Just google invalid imei note 2 and you will see.. Anyway hope this helps. :fingers-crossed:
jes jes I managed to Thank the member unubtanium as I wrote I did I install the ODIN-KashaMalagaTOUCHCWMRecovery-V6.0.3.0.zip and I was immediately able to pass
Now the phone is working again thanks to member UNUBTANIUM THANK YOU THANK YOU
eduka said:
jes jes I managed to Thank the member unubtanium as I wrote I did I install the ODIN-KashaMalagaTOUCHCWMRecovery-V6.0.3.0.zip and I was immediately able to pass
Now the phone is working again thanks to member UNUBTANIUM THANK YOU THANK YOU
Click to expand...
Click to collapse
Hi Mate, NO problem, glad you got it working, and I also hope you got an efs backup too..
Related
THIS POST IS COPY/PASTE FROM "DESIRE ANDROID DEVELOPMENT"...I THINK THIS IS RIGHT PLACE FOR THIS POST PERHAPS...
Hi there got some problems with ROM manager (latest version from Market)...
I put new LeeDroid on my SD card and when start ROM manager goes to "Install rom from sd card" RM asked me for directory and I "tell" him where the ROM is...when I tap on LeeDroid (.zip) ask me for ROM Pre-installation and I tick both options - OK - press Reboot into Clockwork Recovery and continue the installation. I press OK and nothing happened then
Then tried with untick both options - same thing...
Then I try Reboot into Recovery options and nothing happened again
Then download CyanogenMod 6.1.1. from ROM manager - same thing...nothing happened
But when I Reboot into Recovery mod (Hot reboot app) reboot was successfull and I was making System backup....
What is going wrong there
Please help me
Clockwork mode is 2.5.0.7.
P.S.
Sorry if my english is poor
If the ROM Manager is giving you problems, just install your ROM from the recovery menu
Ok...I'll try now
It's going on......and finished
What now?? Nothing happened after that....I have to put the battery out or what?
I was put the battery out and then start device...i'm in AlphaRev Recovery now and when press "Reboot system now" nothing happened??
You mean you have installed Leedroid from your SD card in Recovery?
Once successfully installed, you don't need to pull out your battery, you just need to find the option in your recovery to restart OR boot up your system.
eden2812 said:
You mean you have installed Leedroid from your SD card in Recovery?
Once successfully installed, you don't need to pull out your battery, you just need to find the option in your recovery to restart OR boot up your system.
Click to expand...
Click to collapse
Was but nothig happened just black empty screen is there and when i press power button show me menu for reboot...
I'll try to do it again (install from .zip)
Ok....now here's some options...
apply sdcard:update.zip
choose .zip from card
toggle signature verification
toggle script asserts
What have to do now?? I pressed APPLY UPDATE FROM SD CARD and said:
Finding update package...
Opening update package...
Installing update... and below is everything the same like when was installing Ledroid..
What now?? There's no any menu....
I put back Recovery from Nand backup and press "reboot system now" but there is just black screen on device and nothin' happened..
PLEASE HELP ANYONE!
Finally
Reboot to fastbot was my option and then reboot
you should be selecting [choose .zip from card], then navigate to whatever you named your Leedroid zip.
After this installs and completes, select the option to reboot system, and you're good to go.
eden2812 said:
you should be selecting [choose .zip from card], then navigate to whatever you named your Leedroid zip.
After this installs and completes, select the option to reboot system, and you're good to go.
Click to expand...
Click to collapse
I know that but after flashing LeeDroid need to go tu option Reboot to fastboot and then Reboot device
I wrote it in a post above
But thanks
Got new problem now...unbelivable...
Put LeeDriod on the device and don't like it....and want to back to my stock 2.2 backup...
But when in Recovery mod put Restore...said MD5 mismatch...and try again but now said: E: failed to seek in /cache/update.zip (invalid argument)
E: signature verification failed
Installation aborted
But how?? I was recover once today successfully...what's goin' wrong?
md5 mismatch could mean that the recovery is corrupted?
try turning signature verification off in your recovery to try to fix your signature verification failed problem.
OR try this http://forum.xda-developers.com/showthread.php?t=714114
But I have to ask, when you did you make that backup of that stock 2.2?
eden2812 said:
md5 mismatch could mean that the recovery is corrupted?
try turning signature verification off in your recovery to try to fix your signature verification failed problem.
OR try this http://forum.xda-developers.com/showthread.php?t=714114
Click to expand...
Click to collapse
Thanks for this link
eden2812 said:
But I have to ask, when you did you make that backup of that stock 2.2?
Click to expand...
Click to collapse
I don't really understand what you asked me
I found on xda forum 2.2 stock ROM (rooted) and put it on my phone and fixed all my problems
I recently installed LeeDroId using CWR.
Steps i followed >
1. Download LeeDroId onto SD card.
2. Boot into Recovery
3. BACKUP EXISTING ROM
4. Wipe old rom
5. Install LeeDroId, by navigating to the zip file
6. Reboot once installed
7. WAIT. 1st boot takes about 4 mins.
Done
That worked for me.
Hey, My phone was working fine till yesterday. N when i tried to flash dk froyo .i had to change the kernel and i guess the bootscreen(htc logo) freezed because of that. I tried flashing hcdr and other kernels and even changed rom back to cm 7.But nothing seems to help.Only cwm is working on my phone. CAn someone help me please
btw its a wildfire
Your best bet Is to try run a ruu as that would reset the phone back to stock, bootloader and kernal, but depending on how you s-offed you may lose the ability to root.( untill you s-off again.) Good luck
sent from my steroid powered, cyanogenmod filled wrecking machine! using xda app.
Perform a full wipe (In CWM, Select "Data Wipe / Factory Reset", then, staying in CWM, go to Mounts and Storage, Select "Format /system". After this, flash a ROM (any) and check if it boots.
Tried. Its still not working. Can any1 post a nandroid backup file of any rom for wildfire. Please. I formatted my sd card too by mistake.
and while flashing a ruu. it always shows a error E:Failure at line 65 and something. Its different everytime
Connect your Wildfire to your PC, In CWM, Go to Mounts and Storage, and Select "Mount USB Storage". This will activate Mass Storage Mode and you can access your SDCard on your PC as normal. (I don't think anyone would upload a Nandroid backup of his own, it contains personal stuff like contacts and all. But, if someone does, good for you)
i mount usb storage n then do wat..? i tried flashing every rom possible. But its still not working. Is it the kernel's problem or what??
I am pretty certain performing a full wipe (Following options in CWM - 1: Data Wipe - Factory Reset, along with 2: Wipe Cache Partition, 3: Format /cache, 4: Format /system, 5: Format /data, 6: Wipe cache partition, 7: Wipe Dalvik Cache) in CWM and flashing a fresh ROM will fix your issue, UNLESS your phone is not bricked due to bad flash, but since you already claim that you have done that, I can't help you any further on this.
EDIT - Also one more thing - When you flash the kernel / ROM, do you get a confirmation message "Installation Complete"? What is your CWM version?
Yes i do.it says installation comple and its v3.0.0.6
Sense ROM's like DK will not work on CWM versions above 2.x.x.x. Anyway, since you tried CM7 already, One last suggestion in that case would be to try flashing the RUU via the bootloader.
Steps -
1: Download the RUU you want to install
2: Extract the rom.zip from the RUU. Procedure here
3: Once you have that rom.zip, Rename it to PC49IMG.zip
4: Transfer this to the root of your SDCard (i.e. - Not in any folders / sub-folders)
5: Restart device in HBoot Mode (Press Vol Down + Power simultaneously)
6: It will scan for the file, and ask to install. Follow On-Screen instructions.
Ill give it a try.
owe you big time man..Thanx a lot..
Return of the Jedi, Yoda is the man.
" once its gone,its GONE."
stuck at htc logo
cRo77y said:
Hey, My phone was working fine till yesterday. N when i tried to flash dk froyo .i had to change the kernel and i guess the bootscreen(htc logo) freezed because of that. I tried flashing hcdr and other kernels and even changed rom back to cm 7.But nothing seems to help.Only cwm is working on my phone. CAn someone help me please
Click to expand...
Click to collapse
search for syed zain ahmed on utube and see his video.. i cant post a link to the video coz i am new , after 10 post i will be able to post the link ... it helped me alot.. do try that method.
syed_786 said:
search for syed zain ahmed on utube and see his video.. i cant post a link to the video coz i am new , after 10 post i will be able to post the link ... it helped me alot.. do try that method.
Click to expand...
Click to collapse
Are you him by any chance?
Sent from my locked, tampered ville
wow, this is quite the thread revival, 2011 was ages ago....
help
Help?
or can anyone help me when I tried to install Custom MTD Partitions I'm stuck whit htc screen all to me erase what to do now when I want to install a new room again stuck please help I already tried all I do not have nor restore any deleted by mistake help
hi guys ..
ihave kindlefire no os only TRWP when i make factory reset i get failed message ican't wipe any thing like cache and system and can't mount the kindlefire on the computer to copy update zip file ..
Madanii said:
hi guys ..
ihave kindlefire no os only TRWP when i make factory reset i get failed message ican't wipe any thing like cache and system and can't mount the kindlefire on the computer to copy update zip file ..
Click to expand...
Click to collapse
That is because you have twrp set to simulate actions rather than perform them. You need to adb push a rom zip to your sdcard, uncheck the box in settings that says simulate most actions, do a full wipe minus the sdcard and flash the rom zip.
Thepooch said:
That is because you have twrp set to simulate actions rather than perform them. You need to adb push a rom zip to your sdcard, uncheck the box in settings that says simulate most actions, do a full wipe minus the sdcard and flash the rom zip.
Click to expand...
Click to collapse
thanx .. but when i flash the rom zip i get error ( Error flashing zip '/sdcard/update.zip' )
Madanii said:
thanx .. but when i flash the rom zip i get error ( Error flashing zip '/sdcard/update.zip' )
Click to expand...
Click to collapse
Why are you trying to flash update.zip sometimes an error is telling you there is something wrong with what you're attempting to flash.
Thepooch said:
Why are you trying to flash update.zip sometimes an error is telling you there is something wrong with what you're attempting to flash.
Click to expand...
Click to collapse
after i'm wiped the device .. now i want to install stock rom downloaded from amazon kindlefire software update but when i install this update from trwp i get error message i ignored this and reboot the kindle now he show only kindle logo
Thepooch said:
Why are you trying to flash update.zip sometimes an error is telling you there is something wrong with what you're attempting to flash.
Click to expand...
Click to collapse
now i have no os on kindle ! so iwant to install stock rom on kindlefire from trwp recovery .. how i can ?
First let me say this STOP!!! That method for returning to stock is okay for the first gen device not the second gen. No wonder it keeps failing and probably better that it has. Keep the device charging in recovery or off till I can help you fix this without seriously bricking your kindle. You need to adb push Hashcodes flashable stock zip only not update.zip. Unless you don't care and you happen to need an extra paperweight .
Hay can you help me how I screwed tel. I wanted to drKetan Multitool adwance flas new kernel persius I chose this kernel perzius and when I went after the procedure I only marks skip everything and install kernel then it happened the phone has just started and it said samsung black screen and then I reset the recovery but it did not have a touch Philz, I now have nothing and I only have the option reebot system now, applay update from ADB, applay update from external storage, wipe data / factory reset, wipe cache partition and apply update from cache. I've tried install the new rom but when I go to applay Udate from external storage and choose the rom write me only
e: Failde to verify whole-file signature
if anyone can help me would be happy oodin I've tried to install a stock rom when I press the start waiting and possible signs get pit for mapping and that's all what I can do to
How about going to Download mode and install via ODIN?
See the toolbox for this.
ps: Your phone is NOT bricked!
Bricked means it doesn't do anything anymore and it cannot be revived.
eduka said:
Hay can you help me how I screwed tel. I wanted to drKetan Multitool adwance flas new kernel persius I chose this kernel perzius and when I went after the procedure I only marks skip everything and install kernel then it happened the phone has just started and it said samsung black screen and then I reset the recovery but it did not have a touch Philz, I now have nothing and I only have the option reebot system now, applay update from ADB, applay update from external storage, wipe data / factory reset, wipe cache partition and apply update from cache. I've tried install the new rom but when I go to applay Udate from external storage and choose the rom write me only
e: Failde to verify whole-file signature
if anyone can help me would be happy oodin I've tried to install a stock rom when I press the start waiting and possible signs get pit for mapping and that's all what I can do to
Click to expand...
Click to collapse
flash the pit file before flasing rom http://d-h.st/Dlv if u know how to do it using odin or search youtube but its simple as flashing rom
Hi thanks for the guidance and effort but sm already ustimal via Odin sm upload their new ricovery cwm 6 And now I work again all thanks again
After installing a rooted app, the app asked to reboot the phone in order to complete the driver installation, then after that the phone wont start up and stuck at the logo....:crying: In a panic I wipe data/factory reset and now I got a messege saying
This phone is LOCK state.
E:failed to mount/sdcard (No such file or directory)
There is no UPDATE.APP in /sdcard/dlead or /data/share/0/dload
Huawei SD card update fail.......
cust copying files....
copy cust file successed
FAIL
Please help
kabatinouguy said:
After installing a rooted app, the app asked to reboot the phone in order to complete the driver installation, then after that the phone wont start up and stuck at the logo....:crying: In a panic I wipe data/factory reset and now I got a messege saying
This phone is LOCK state.
E:failed to mount/sdcard (No such file or directory)
There is no UPDATE.APP in /sdcard/dlead or /data/share/0/dload
Huawei SD card update fail.......
cust copying files....
copy cust file successed
FAIL
Please help
Click to expand...
Click to collapse
looks like you have a soft-brick.
Download a Official-Rom, move the Update into the DLOAD-Folder,
go into the original Recovery and let it flash the file.
After this your phone should be starting normally.
kabatinouguy said:
After installing a rooted app, the app asked to reboot the phone in order to complete the driver installation, then after that the phone wont start up and stuck at the logo....:crying: In a panic I wipe data/factory reset and now I got a messege saying
This phone is LOCK state.
E:failed to mount/sdcard (No such file or directory)
There is no UPDATE.APP in /sdcard/dlead or /data/share/0/dload
Huawei SD card update fail.......
cust copying files....
copy cust file successed
FAIL
Please help
Click to expand...
Click to collapse
which app is that
nARDOs said:
which app is that
Click to expand...
Click to collapse
From what i can remember I think it SUPER USER
kabatinouguy said:
From what i can remember I think it SUPER USER
Click to expand...
Click to collapse
Which rooting methode did u use to root ur phone?
nARDOs said:
Which rooting methode did u use to root ur phone?
Click to expand...
Click to collapse
I use ROOT WIZARD method....
This happened to me yesterday as well, I was about to restore apps using TB but the phone frooze and then anything made it boot. I don't know how Exactly I solved it but all I did was:
1.- Flash TWRP v3.01
2.- Wipe all the phone, including system, data, cust and internal sd
3.- From within TWRP flashed STock boot and recovery for 118CN FW.
4.- Placed 118CN UPDATE.APP in external sd/dload
5.- from within TWRP still, rebooted the phone to recovery.
6.- The phone started to flash the update from external SD.
7.- It succeded to flash files but couldn't mount /sdcard so I repeated steps above once more
8.- from stock recovery wipe/factory reset
9.- Tried the update again and voila! Phone succeded and booted just fine... Now it's been running with no issues since 2 days
I was running 118CN FW and a test kernel with some "non tested" or unstable features which I think forced the phone to frooze and then the data corruption...
kabatinouguy said:
I use ROOT WIZARD method....
Click to expand...
Click to collapse
I used eROOT method with HiSuite.
Has never had issues.
Are u on B118cn ?
nARDOs said:
I used eROOT method with HiSuite.
Has never had issues.
Are u on B118cn ?
Click to expand...
Click to collapse
Oh no Im on old one, B116
kabatinouguy said:
Oh no Im on old one, B116
Click to expand...
Click to collapse
Why not move to B125.
less bugs.
Better battery life and smoother...
raolleel said:
looks like you have a soft-brick.
Download a Official-Rom, move the Update into the DLOAD-Folder,
go into the original Recovery and let it flash the file.
After this your phone should be starting normally.
Click to expand...
Click to collapse
Thanks mate my phone is working again........it took me a long time to figure out how to do flashing and everything because I am a beginner but after doing a lot of reading and watching utube I finally have some basic knowledge on unbricking a phone....Thanks again for your information it really helps me alot....
huawei p6
hi i did the same putting official firmware in d load and installed and i rebooted it wright?
---------- Post added at 11:09 AM ---------- Previous post was at 11:04 AM ----------
hi can anyone help my huawei p6 is stuck to the logo
This phone is LOCK state.
E:failed to mount/sdcard (No such file or directory)
There is no UPDATE.APP in /sdcard/dlead or /data/share/0/dload
Huawei SD card update fail.......
cust copying files....
copy cust file successed
FAIL
Please help
jimbo77 said:
This happened to me yesterday as well, I was about to restore apps using TB but the phone frooze and then anything made it boot. I don't know how Exactly I solved it but all I did was:
1.- Flash TWRP v3.01
2.- Wipe all the phone, including system, data, cust and internal sd
3.- From within TWRP flashed STock boot and recovery for 118CN FW.
4.- Placed 118CN UPDATE.APP in external sd/dload
5.- from within TWRP still, rebooted the phone to recovery.
6.- The phone started to flash the update from external SD.
7.- It succeded to flash files but couldn't mount /sdcard so I repeated steps above once more
8.- from stock recovery wipe/factory reset
9.- Tried the update again and voila! Phone succeded and booted just fine... Now it's been running with no issues since 2 days
I was running 118CN FW and a test kernel with some "non tested" or unstable features which I think forced the phone to frooze and then the data corruption...
Click to expand...
Click to collapse
how did you manage to flash the stock boot.img and recovery inside twrp???
huawei
hi thanks how do you flash with trwp? cause i am not that expert please cant use my phone
thanks
You must do it through adb.
ahhhh..
sry
but i can't even install a rom by using the adb sideload command..it fails because of "file_getprop: failed to stat "/system/build.prop": No such file or directory"
what can i do now?
tried to reload the B510..
should i try with a custom ROM?
blueIBI said:
ahhhh..
sry
but i can't even install a rom by using the adb sideload command..it fails because of "file_getprop: failed to stat "/system/build.prop": No such file or directory"
what can i do now?
tried to reload the B510..
should i try with a custom ROM?
Click to expand...
Click to collapse
Flash through adb stock recovery. Extract your sdcard, create on it dload folder using your PC/Laptop. In dload folder put the update.app of the ROM you want and insert back in the device the sdcard. Press volume up + volume down + power button until the HUAWEI logo appears, after that release all the buttons and the phone will start to update the firmware.
Thanks beyond..
Got it finally again..
But it was very tricky..
Had to usw the b507 by reyncla (thanks for sharing)..
I let this for now in my phone..
I tried the Method you mentioned..but i could not reach the phone by ADB directly (in twrp via ADB sideload it worked finally)..
Thanks for answering..maybe i switch sometime back to the b510 or to the official release (when it comes)..
Sent from my P6-U06 using XDA Free mobile app
blueIBI said:
Thanks beyond..
Got it finally again..
But it was very tricky..
Had to usw the b507 by reyncla (thanks for sharing)..
I let this for now in my phone..
I tried the Method you mentioned..but i could not reach the phone by ADB directly (in twrp via ADB sideload it worked finally)..
Thanks for answering..maybe i switch sometime back to the b510 or to the official release (when it comes)..
Sent from my P6-U06 using XDA Free mobile app
Click to expand...
Click to collapse
Great. Enjoy.
Hi,
Probably after select something wrong in TouchRecoveryInstaller-v1_01 i cant start my phone any more.
- PC don't recognize usb via cable
- sd card not detected (apply update from external storage) appears ../ (E:failed to mount /sdcard (No such file of directory).
- wipe data/factory rese - does not help.
- reboot system now - blocks on logo HUAWEI Ascend
Each expert suggestion and idea is welcome and thank you.