Develop Bugs

[Q] Please Help :(

Hi!
So there is my problem:
I upgraded to KitKat and tryed to install gapps but then everything f* up. So with TWRP I tried to install B125 but it didn't work so I put this B111 on my phone than I tried to install it but it failed and TWRP says that there isn't OS on my phone
Also I don't have any sd card..
What can i do?

maticex said:
Hi!
So there is my problem:
I upgraded to KitKat and tryed to install gapps but then everything f* up. So with TWRP I tried to install B125 but it didn't work so I put this B111 on my phone than I tried to install it but it failed and TWRP says that there isn't OS on my phone
Also I don't have any sd card..
What can i do?
Click to expand...
Click to collapse
Go get an SD CARD from someone and put on it B125 International Version or any other ROM for that matter, and do it fast until your phone runs out of battery. Put update.app in dload folder. You can do it through adb and fastboot, but the safest way is the way that I have just told you. And after that press the Power button and volume up/down at once, all of them until stock recovery starts updating/upgrading... well installing the new ROM, I hope you still have stock recovery.

So when I put it in dload and put it in phone what next?

maticex said:
So when I put it in dload and put it in phone what next?
Click to expand...
Click to collapse
Press the Power button and volume up/down at once, all of them until stock recovery starts. If you only have TWRP find a flashable ROM that is a ZIP, and flash it through TWRP.

ZuperStyler said:
Press the Power button and volume up/down at once, all of them until stock recovery starts. If you only have TWRP find a flashable ROM that is a ZIP, and flash it through TWRP.
Click to expand...
Click to collapse
I have b111.zip in my internal storage if it helps?

maticex said:
I have b111.zip in my internal storage if it helps?
Click to expand...
Click to collapse
You must move it to an SD CARD, get one from someone just to restore your phone.

ZuperStyler said:
You must move it to an SD CARD, get one from someone just to restore your phone.
Click to expand...
Click to collapse
Do you know any B125 firmware which is in zip? not APP. file

maticex said:
Do you know any B125 firmware which is in zip? not APP. file
Click to expand...
Click to collapse
i advise you to flash this ROM, try it. http://forum.xda-developers.com/showthread.php?t=2585783 Must work since you had KitKat, your bootloader must be unlocked. Try CyanogenMod 10.1 following the instructions. But again, use an SD CARD.

ZuperStyler said:
i advise you to flash this ROM, try it. http://forum.xda-developers.com/showthread.php?t=2585783 Must work since you had KitKat, your bootloader must be unlocked. Try CyanogenMod 10.1 following the instructions. But again, use an SD CARD.
Click to expand...
Click to collapse
I'll try probably

maticex said:
I'll try probably
Click to expand...
Click to collapse
Try ? LOL Any ROM is good to put your phone into a workable state. After that, install whatever ROM you like.

I understood that this ROM can be instaled only via CN 118?

maticex said:
I understood that this ROM can be instaled only via CN 118?
Click to expand...
Click to collapse
I had B125 International Locked and then I flashed KitKat, and after that CyanogenMod 10.1 and worked. Now, fell free to try what you want, but if you want to be safe install stock recovery if you don't have it anymore and upgrade from dload folder B125. All the info you want you can find on XDA. Just search what you need.

ZuperStyler said:
I had B125 International Locked and then I flashed KitKat, and after that CyanogenMod 10.1 and worked. Now, fell free to try what you want, but if you want to be safe install stock recovery if you don't have it anymore and upgrade from dload folder B125. All the info you want you can find on XDA. Just search what you need.
Click to expand...
Click to collapse
Do you maybe have original stock recovery file and do I just flash it with TWRP?

maticex said:
Do you maybe have original stock recovery file and do I just flash it with TWRP?
Click to expand...
Click to collapse
But you don't have an OS.
Put your device in fastboot mode ( > adb reboot bootloader )
Extract recovery.img from archive
fastboot flash recovery recovery.img ;
fastboot reboot ;
Tell me what stock recovery do you want.
Place the ZIP with the recovery let's say on Local Disk ( C: ) Create a folder and name it fastboot. Put the recovery ZIP in that folder. After that connect your phone to the PC, now press shift and right click on your mouse or on your laptop and press Open Command Window here. There you write adb bootloader and press enter.
fastboot flash recovery recovery.img ;
fastboot reboot ;

defo just get like a 4gb sd card.

Thank you for all I'm on cm now, but I don't like that I can't take photos with it Can I get camera working?
How can I install normal huawei software now?

Revert to stock recovery first.

How can I do this, I don't find threads with how can i do this?
Can I get Camera working there it says that it is working but on my phone gallery chrashes when I open camera app

Use Camera360, works perfectly.

maticex said:
Hi!
So there is my problem:
I upgraded to KitKat and tryed to install gapps but then everything f* up. So with TWRP I tried to install B125 but it didn't work so I put this B111 on my phone than I tried to install it but it failed and TWRP says that there isn't OS on my phone
Also I don't have any sd card..
What can i do?
Click to expand...
Click to collapse
i done someting similar after trying to put b125 back to phone.. well he was stuck at start with huawei logo..anyway i don`t put on my sd card any zip.. i put on main sdcard the folder "dload" and inside that folder was update.app." file
soo... {my phone was freezeing with huawei logo not opening up anymore so i put that folder on sdcard useing diferent phone then i connect phone to usb and hold power putton this way that logo with huaway disear and phone restarted.in that moment i take off finger from power button .and then holding the volume plus minus and again power button . anyway not sure if was needed to conect phone at usb to restart it but for me works }
i done nothing more.. nothing on computer.. the instalation of b125 works normaly directly from that recovery menu

[Q] Stuck in boot, need help

Hello,
I'm looking for help as I have exhausted all of my search on google and xda developers and the answer doesn't seem to be there. I'm afraid I might be unable to get out of this one.
I have a huawei ascend P6-U06 I bought it and it came with the international firmware, I had rooted it and flashed miui v5 into my phone, everything was fine but one thing, I was unable to use themer, so about 3 days ago I finally decided to flash omni rom.
I downloaded omni rom and installed CWM recovery and once into the system I selected the zip from my sd card and flashed it, only to find that the phone would not go pass the first screen (stuck in boot and could not be shutdown or anything)
Since I did not do a TWRP recovery (and I don't know how, I'm just a beginner) I was unable to do anything other than the "3 button method" so I looked and found that I could put the UPDATE.APP file on the dload folder and it should work, so I tried it and the UPDATE.APP firmware version is the B125, all good I think this was the Chinese version but it had English and other languages as well, but Chinese seemed to be the main one.
Anyways I had the phone back and it did an update, after the update everything was working fine, I deleted the dload file from the sd card, also I saw that the "system" or the phone itself created a dload file on the internal storage but then once I had themer on the phone I saw myself that I hated the emotion ui and in the first place that was the reason I had put miui into my phone, I still wanted to try omni rom and persistently I tried a second time.
Now this time since I already new that I could just do the dload thingy I thought (what could happen) so I tried again with CWM to flash the omni rom (the latest version) but it gave me an error saying something like the installation was aborted or something like that.
So I went back to having the phone stuck in boot, I put the B125 UPDATE.APP and created a dload folder on the sd card, but when doing the "3 button method" the system gave me an error, I tried downloading the B122 and the B132 and also the B510 but although I have put the UPDATE.APP on the dload folder it just doesn't do it's magic like it previously did.
Now I don't really have money to buy another phone, if I did I would just buy another one (I like the p7) but I don't so I need to fix this issue otherwise I don't have a phone.
Please help me, I'd appreciate if you can do your best explaining as I'm dumb in this matter, (just a beginner as said before) Also I'm attaching a picture of the error message being received when entering the system recovery through the "3 button method"
Thanks for all of your time, I DO appreciate your help and if you have any questions please just ask! I really need to fix this!

DanRioja said:
Hello,
I'm looking for help as I have exhausted all of my search on google and xda developers and the answer doesn't seem to be there. I'm afraid I might be unable to get out of this one.
I have a huawei ascend P6-U06 I bought it and it came with the international firmware, I had rooted it and flashed miui v5 into my phone, everything was fine but one thing, I was unable to use themer, so about 3 days ago I finally decided to flash omni rom.
I downloaded omni rom and installed CWM recovery and once into the system I selected the zip from my sd card and flashed it, only to find that the phone would not go pass the first screen (stuck in boot and could not be shutdown or anything)
Since I did not do a TWRP recovery (and I don't know how, I'm just a beginner) I was unable to do anything other than the "3 button method" so I looked and found that I could put the UPDATE.APP file on the dload folder and it should work, so I tried it and the UPDATE.APP firmware version is the B125, all good I think this was the Chinese version but it had English and other languages as well, but Chinese seemed to be the main one.
Anyways I had the phone back and it did an update, after the update everything was working fine, I deleted the dload file from the sd card, also I saw that the "system" or the phone itself created a dload file on the internal storage but then once I had themer on the phone I saw myself that I hated the emotion ui and in the first place that was the reason I had put miui into my phone, I still wanted to try omni rom and persistently I tried a second time.
Now this time since I already new that I could just do the dload thingy I thought (what could happen) so I tried again with CWM to flash the omni rom (the latest version) but it gave me an error saying something like the installation was aborted or something like that.
So I went back to having the phone stuck in boot, I put the B125 UPDATE.APP and created a dload folder on the sd card, but when doing the "3 button method" the system gave me an error, I tried downloading the B122 and the B132 and also the B510 but although I have put the UPDATE.APP on the dload folder it just doesn't do it's magic like it previously did.
Now I don't really have money to buy another phone, if I did I would just buy another one (I like the p7) but I don't so I need to fix this issue otherwise I don't have a phone.
Please help me, I'd appreciate if you can do your best explaining as I'm dumb in this matter, (just a beginner as said before) Also I'm attaching a picture of the error message being received when entering the system recovery through the "3 button method"
Thanks for all of your time, I DO appreciate your help and if you have any questions please just ask! I really need to fix this!
Click to expand...
Click to collapse
So first of all DON'T ever use CWM on our phone because its not really good to use! Always use TWRP.
Than second when you want to install a KK ROM like OMNI you have to update first via update.app to a KK firmware, then install TWRP and so on. This is all described in the first post in the OMNI thread.
Third and this is your problem now you have an modified build.prop in your ROM so the recovery will not update you have to push an stock unmodified build.prop via fastboot, that's the only method I think. How to push that with fastboot there you will find something on google.
Good luck

try this
DanRioja said:
Hello,
I'm looking for help as I have exhausted all of my search on google and xda developers and the answer doesn't seem to be there. I'm afraid I might be unable to get out of this one.
I have a huawei ascend P6-U06 I bought it and it came with the international firmware, I had rooted it and flashed miui v5 into my phone, everything was fine but one thing, I was unable to use themer, so about 3 days ago I finally decided to flash omni rom.
I downloaded omni rom and installed CWM recovery and once into the system I selected the zip from my sd card and flashed it, only to find that the phone would not go pass the first screen (stuck in boot and could not be shutdown or anything)
Since I did not do a TWRP recovery (and I don't know how, I'm just a beginner) I was unable to do anything other than the "3 button method" so I looked and found that I could put the UPDATE.APP file on the dload folder and it should work, so I tried it and the UPDATE.APP firmware version is the B125, all good I think this was the Chinese version but it had English and other languages as well, but Chinese seemed to be the main one.
Anyways I had the phone back and it did an update, after the update everything was working fine, I deleted the dload file from the sd card, also I saw that the "system" or the phone itself created a dload file on the internal storage but then once I had themer on the phone I saw myself that I hated the emotion ui and in the first place that was the reason I had put miui into my phone, I still wanted to try omni rom and persistently I tried a second time.
Now this time since I already new that I could just do the dload thingy I thought (what could happen) so I tried again with CWM to flash the omni rom (the latest version) but it gave me an error saying something like the installation was aborted or something like that.
So I went back to having the phone stuck in boot, I put the B125 UPDATE.APP and created a dload folder on the sd card, but when doing the "3 button method" the system gave me an error, I tried downloading the B122 and the B132 and also the B510 but although I have put the UPDATE.APP on the dload folder it just doesn't do it's magic like it previously did.
Now I don't really have money to buy another phone, if I did I would just buy another one (I like the p7) but I don't so I need to fix this issue otherwise I don't have a phone.
Please help me, I'd appreciate if you can do your best explaining as I'm dumb in this matter, (just a beginner as said before) Also I'm attaching a picture of the error message being received when entering the system recovery through the "3 button method"
Thanks for all of your time, I DO appreciate your help and if you have any questions please just ask! I really need to fix this!
Click to expand...
Click to collapse
hi there. try to boot with adb shell in fastboot mode.
if you have b111,125,132,118 etc you need twrp for jelly bean.
after that install twrp recovery and wipe system, data, cache, dalvik.
then reinstall stock recovery also via fastboot and then you can install update.app from dload.
if you want omni you have to update to official b510 because it repartitions your device, then flash omni via twrp.
don't use cwm again

adipaval said:
hi there. try to boot with adb shell in fastboot mode.
if you have b111,125,132,118 etc you need twrp for jelly bean.
after that install twrp recovery and wipe system, data, cache, dalvik.
then reinstall stock recovery also via fastboot and then you can install update.app from dload.
if you want omni you have to update to official b510 because it repartitions your device, then flash omni via twrp.
don't use cwm again
Click to expand...
Click to collapse
Hey thank you for the quick response, could you send me a link with the steps? as I said before I'm really just a beginner so I don't understand much, I mean I don't know what adb shell is, and how to enter the fastboot mode. I'd appreciate if you could help me with that!
Thanks

try this
sorry for the late response, i've been very busy.
you must have hisuite installed because you need the drivers.
so first you have to put your phone in download mode. you do this by starting your phone with vol down pressed. (it will remain on the ascend logo) and in windows you should see a quick removable device.
you need twrp recovery for jelly bean from here (the twrp2.6.x.x. IMG file ) http://forum.xda-developers.com/showthread.php?t=2534420
put the downloaded twrp2.6.3.3.img file in the folder which you'll extract from the attached zip of this post
in the fastboot folder shif+right click - start command windows here
type adb reboot bootloader - it will start the service then display error device not founde
type fastboot flash recovery "and the nameof the recovery ex. twrp2.6.3.3.img" - it should sai ok
safely remove device from windows and reboot your phone.
then you should be able to boot in twrp and clear system, data, cache, dalvik cache. this will let your phone without an operating system so either you install a custom jelly bean or put via twrp the stock recovery back (you cand find on the same page linked above) and then install stock jelly bean via dload folder.
P.S. from what I see in your screenshot, did you put an update.zip in hwouc folder on sdcard? hwouc is the folder where phone saves updates downloaded via ota then installs them from recovery.
are you sure you put update.APP in dload folder?
hope I helped

adipaval said:
sorry for the late response, i've been very busy.
you must have hisuite installed because you need the drivers.
so first you have to put your phone in download mode. you do this by starting your phone with vol down pressed. (it will remain on the ascend logo) and in windows you should see a quick removable device.
you need twrp recovery for jelly bean from here (the twrp2.6.x.x. IMG file ) http://forum.xda-developers.com/showthread.php?t=2534420
put the downloaded twrp2.6.3.3.img file in the folder which you'll extract from the attached zip of this post
in the fastboot folder shif+right click - start command windows here
type adb reboot bootloader - it will start the service then display error device not founde
type fastboot flash recovery "and the nameof the recovery ex. twrp2.6.3.3.img" - it should sai ok
safely remove device from windows and reboot your phone.
then you should be able to boot in twrp and clear system, data, cache, dalvik cache. this will let your phone without an operating system so either you install a custom jelly bean or put via twrp the stock recovery back (you cand find on the same page linked above) and then install stock jelly bean via dload folder.
P.S. from what I see in your screenshot, did you put an update.zip in hwouc folder on sdcard? hwouc is the folder where phone saves updates downloaded via ota then installs them from recovery.
are you sure you put update.APP in dload folder?
hope I helped
Click to expand...
Click to collapse
Hey, I was trying to follow the instructions, but somehow this is not working, I mean the hisuite is stock searching the drivers and once I type adb reboot bootloader it just says not found. but doesn't do anything.
As for the screenshot I found it online, it's the closest thing to the error presented, but I did put the UPDATE.APP on the dload folder
The error I get first it gives me some sort of error which disappears once the Android system recovery menu comes up. then the only thing I'm able to see says:
Checking Module MD5RSA.. OK
Checking Module CRC.... OK
Checking Module CURVER.... OK
Checking Module VERLIST....
Huawei SD card update fail.....
cust copying files...
copy cust files successed!
===================
FAIL
===================
EDIT: I'm updating the actual picture of the error received.

Not found as in command not found or what? Post print screen please
Sent from my HUAWEI P6-U06 using XDA Free mobile app

adipaval said:
Not found as in command not found or what? Post print screen please
Sent from my HUAWEI P6-U06 using XDA Free mobile app
Click to expand...
Click to collapse
Here's the screenshot!

Did you see that you wrote abd instead of adb?
Sent from my HUAWEI P6-U06 using XDA Free mobile app

adipaval said:
Did you see that you wrote abd instead of adb?
Sent from my HUAWEI P6-U06 using XDA Free mobile app
Click to expand...
Click to collapse
My bad, although with adb is still not working lol.

mine is working
DanRioja said:
My bad, although with adb is still not working lol.
Click to expand...
Click to collapse
i downloaded zip from before to be sure.
i see in my console that it runs as administrator, i think that's the reason why yours is not working.

adipaval said:
i downloaded zip from before to be sure.
i see in my console that it runs as administrator, i think that's the reason why yours is not working.
Click to expand...
Click to collapse
I have a question, could it have something to do with the drivers not being installed? I mean I installed the hi-suite but it never installed the drivers, so I'm wondering if that could be the reason, or could it be due to the phone not booting and not having TWRP?

DanRioja said:
I have a question, could it have something to do with the drivers not being installed? I mean I installed the hi-suite but it never installed the drivers, so I'm wondering if that could be the reason, or could it be due to the phone not booting and not having TWRP?
Click to expand...
Click to collapse
EDIT: I'm uploading the picture, I tried with administrator, still not working.

If it says device not found it means adb started but cannot find device.
It is ok because in download mode you cannot enable usb debugging so that adb sees it but if you type to flash the twrp.img it should work. At least on mine it did
Be sure you started phone in download mode by powering it on with vol down pressed. Press it longer just to be sure
Sent from my HUAWEI P6-U06 using XDA Free mobile app

adipaval said:
If it says device not found it means adb started but cannot find device.
It is ok because in download mode you cannot enable usb debugging so that adb sees it but if you type to flash the twrp.img it should work. At least on mine it did
Be sure you started phone in download mode by powering it on with vol down pressed. Press it longer just to be sure
Sent from my HUAWEI P6-U06 using XDA Free mobile app
Click to expand...
Click to collapse
Hmm it's weird, I tried to skip the first step " adb reboot bootloader" and went to the second step, this is what I got (check the picture)

.img
DanRioja said:
Hmm it's weird, I tried to skip the first step " adb reboot bootloader" and went to the second step, this is what I got (check the picture)
Click to expand...
Click to collapse
that's because you did not write .img
fastboot flash recovery twrp_2_6_3_3_recovery.img

DanRioja said:
Hmm it's weird, I tried to skip the first step " adb reboot bootloader" and went to the second step, this is what I got (check the picture)
Click to expand...
Click to collapse
Hello !
Please follow this steps from here !
Because adb not working, you can put your device in bootloader mode manually : press and keep at the same time for about 10~15 sec. power button and volume down , now your device are in bootloader mode and you can use "fastboot" command to flash stock/twrp recovery !
If your device was on Android JB you must use stock/twrp forAndroid JB, else if your device was on Android KitKat you must use stock/twrp for Android KitKat .
The next time when you want to flash something in your device please do your research more - because here on XDA you have almost all the answers to every question - sure, you need to spend some time to read - and not ultimately you can ask , if you are not 100% sure what to do
Good luck !

surdu_petru said:
Hello !
Please follow this steps from here !
Because adb not working, you can put your device in bootloader mode manually : press and keep at the same time for about 10~15 sec. power button and volume down , now your device are in bootloader mode and you can use "fastboot" command to flash stock/twrp recovery !
If your device was on Android JB you must use stock/twrp forAndroid JB, else if your device was on Android KitKat you must use stock/twrp for Android KitKat .
The next time when you want to flash something in your device please do your research more - because here on XDA you have almost all the answers to every question - sure, you need to spend some time to read - and not ultimately you can ask , if you are not 100% sure what to do
Good luck !
Click to expand...
Click to collapse
I'm going to give it a try. thanks!

[Q] huawei ascend p6 bricked HELP ME

hi
my huawei ascend p6 phone don't boot up and i cant reset the phone
went i re set
formatting/cache.....
data wipe complete.
E :failed to mount /cache (invalid argument)
E :failed to mount/data(invalid argument)
as shown in the picture attached
Can any help to find me a solution for this?

Try to reinstall your firmware via dload just search for a tutorial here on xda.

i tryed
taaeem said:
Try to reinstall your firmware via dload just search for a tutorial here on xda.
Click to expand...
Click to collapse
i try to re install your firmware,but it not working
can u send some details

sarathcskwi said:
i try to re install your firmware,but it not working
can u send some details
Click to expand...
Click to collapse
Okay download the B132 or B125 extract the archive and but the dload folder onto your SD card than reboot while holding power + vol+ + vol-. It should install the firmware right away. This will delete all your apps and app data. When this don't work try reformatting the SD card to FAT32 or use another SD card. That are all option I know for now.

hi
taaeem said:
Okay download the B132 or B125 extract the archive and but the dload folder onto your SD card than reboot while holding power + vol+ + vol-. It should install the firmware right away. This will delete all your apps and app data. When this don't work try reformatting the SD card to FAT32 or use another SD card. That are all option I know for now.
Click to expand...
Click to collapse
i already do this but it don't work .................i don't root my phone can i root this now?

sarathcskwi said:
i already do this but it don't work .................i don't root my phone can i root this now?
Click to expand...
Click to collapse
Push via adb a custom recovery : TWRP.
Put a custom ROM on your sdcard and flash it via TWRP. That will also root your device.

hi
I have the same problem some answers?
my huawei ascend p6 phone don't boot up and i cant reset the phone
went i re set
formatting/cache.....
data wipe complete.
E :failed to mount /cache (invalid argument)
E :failed to mount/data(invalid argument)
as shown in the picture attached
Can any help to find me a solution for this?

lasega said:
hi
I have the same problem some answers?
my huawei ascend p6 phone don't boot up and i cant reset the phone
went i re set
formatting/cache.....
data wipe complete.
E :failed to mount /cache (invalid argument)
E :failed to mount/data(invalid argument)
as shown in the picture attached
Can any help to find me a solution for this?
Click to expand...
Click to collapse
Try wiping the phone through fastboot and then try to flash the firmware with stock recovery. So get into bootloader mode (power+volume down untill it gets stuck on huawei ascend logo), connect it with pc and use fastboot commands to wipe all on phone, flash a stock recovery again with fastboot recovery, and then try to isntall the firmware with the recovery.
Sent from my SM-G850F

tileeq said:
Try wiping the phone through fastboot and then try to flash the firmware with stock recovery. So get into bootloader mode (power+volume down untill it gets stuck on huawei ascend logo), connect it with pc and use fastboot commands to wipe all on phone, flash a stock recovery again with fastboot recovery, and then try to isntall the firmware with the recovery.
Sent from my SM-G850F
Click to expand...
Click to collapse
a tutorial?

I'm sorry to tall but your phone is now like mine its hard bricked internal storage is dead you need to change motherboard

you give the good answer hard bricked,,,,,,,,,,,, yes hard bricked,,,,,,, if you can wipe your phone and do formating and it give answer ,,,,FAIL,,,,,, then its mean hardware problem,,,,,,,,,, firmware can not be installed,,,,,,

qazifakeera said:
you give the good answer hard bricked,,,,,,,,,,,, yes hard bricked,,,,,,, if you can wipe your phone and do formating and it give answer ,,,,FAIL,,,,,, then its mean hardware problem,,,,,,,,,, firmware can not be installed,,,,,,
Click to expand...
Click to collapse
I have the same problem with my huawei ascend p6
have you unlock the bootloader? take a look at this link : http://forum.xda-developers.com/showthread.php?t=2682979
Good luck.!

link dead

Help installing any rom, sudden soft brick

Hi, yesterday my phone ran out of battery and when i charged it only appear the Ascend logo and then got stuck on the android screen, been trying to install any rom but it doesnt recognize any in the dload folder, also when i perform a factory data after the message formatting/cache it says "reset ad remain times error! anyone nows what does it mean, thanks.

vampvr said:
Hi, yesterday my phone ran out of battery and when i charged it only appear the Ascend logo and then got stuck on the android screen, been trying to install any rom but it doesnt recognize any in the dload folder, also when i perform a factory data after the message formatting/cache it says "reset ad remain times error! anyone nows what does it mean, thanks.
Click to expand...
Click to collapse
What is your recovery ? If you have TWRP plug your phone to usb them connect your phone has a fisical storage to computer.
Search "dload" folder and replace it with another d.load file.
Restart the phone to TWRP and the dload maybe start work again I think, try it
If not
You need to use adb fastboot to install "TWRP recovery", then restart in adb mode to recovery.
Hope it help.

AngelOfBlood said:
What is your recovery ? If you have TWRP plug your phone to usb them connect your phone has a fisical storage to computer.
Search "dload" folder and replace it with another d.load file.
Restart the phone to TWRP and the dload maybe start work again I think, try it
If not
You need to use adb fastboot to install "TWRP recovery", then restart in adb mode to recovery.
Hope it help.
Click to expand...
Click to collapse
i have stock recovery, it had the b707 rom, the adb wont recognize my phone

vampvr said:
i have stock recovery, it had the b707 rom, the adb wont recognize my phone
Click to expand...
Click to collapse
Can you enter fstboot mode and connect it with the pc while in fb mode? When its powered off, press power button and hold volume down button. If it works ok it should be stuck on huawei ascend logo, that means that you are in fastboot mode. If you can do it them you can try to wipe all and reinstall recovery and boot files from the update then try to flash a system.
Sent from my SM-G850F

tileeq said:
Can you enter fstboot mode and connect it with the pc while in fb mode? When its powered off, press power button and hold volume down button. If it works ok it should be stuck on huawei ascend logo, that means that you are in fastboot mode. If you can do it them you can try to wipe all and reinstall recovery and boot files from the update then try to flash a system.
Sent from my SM-G850F
Click to expand...
Click to collapse
yes i can enter fastboot mode, it got stuck on huawei logo, do you know where i can find a tutorial to wipe all and reinstall recovery with boot files, i had a saved tutorial but i lost it

vampvr said:
yes i can enter fastboot mode, it got stuck on huawei logo, do you know where i can find a tutorial to wipe all and reinstall recovery with boot files, i had a saved tutorial but i lost it
Click to expand...
Click to collapse
Just search for fastboot commands and get the files ready before any wiping.
Sent from my SM-G850F

ok now i got the boot img loaded, do i need to upload the os with the .img or only the update.app?

vampvr said:
ok now i got the boot img loaded, do i need to upload the os with the .img or only the update.app?
Click to expand...
Click to collapse
If you flashed boot and recovery now try to install update.app.
Sent from my SM-G850F

tileeq said:
If you flashed boot and recovery now try to install update.app.
Sent from my SM-G850F
Click to expand...
Click to collapse
i tried to install update.app but nothing happens, i put a zip folder with the update.app and the boot.img but it appears on the screen e:signature verification failed, im going to try doing it again with the b116sp1

vampvr said:
i tried to install update.app but nothing happens, i put a zip folder with the update.app and the boot.img but it appears on the screen e:signature verification failed, im going to try doing it again with the b116sp1
Click to expand...
Click to collapse
The update.app file should be placed in a folder named dload on the root of the sd card.
Sent from my SM-G850F
---------- Post added at 19:10 ---------- Previous post was at 19:09 ----------
And btw you should have flashed boot.img together with recovery.
Sent from my SM-G850F

still cant put any rom, all i get is e:signature verification failed, i put all the folders on the root of the sd card and im trying with 2 sd cards, im goint to take it to huawei next monday

tileeq said:
The update.app file should be placed in a folder named dload on the root of the sd card.
Sent from my SM-G850F
---------- Post added at 19:10 ---------- Previous post was at 19:09 ----------
And btw you should have flashed boot.img together with recovery.
Sent from my SM-G850F
Click to expand...
Click to collapse
i flashed boot.img with recovery but still cant install any rom, im still getting the message e:signature verficiation failes

vampvr said:
Hi, yesterday my phone ran out of battery and when i charged it only appear the Ascend logo and then got stuck on the android screen, been trying to install any rom but it doesnt recognize any in the dload folder, also when i perform a factory data after the message formatting/cache it says "reset ad remain times error! anyone nows what does it mean, thanks.
Click to expand...
Click to collapse
Did you try to flash again b707? Idk any more solution except if you try repacking update.app with Huawei update extractor and flashing img by img... it's worth to try
Sent from my HUAWEI P6-U06 using XDA mobile app

AdnanCG said:
Did you try to flash again b707? Idk any more solution except if you try repacking update.app with Huawei update extractor and flashing img by img... it's worth to try
Sent from my HUAWEI P6-U06 using XDA mobile app
Click to expand...
Click to collapse
i cant find the b707, its no longer available at the huawei page

vampvr said:
i cant find the b707, its no longer available at the huawei page
Click to expand...
Click to collapse
It is still available here: http://emui.huawei.com/cn/plugin.php?id=hwdownload&mod=detail&mid=42

miz_pimp said:
It is still available here: http://emui.huawei.com/cn/plugin.php?id=hwdownload&mod=detail&mid=42
Click to expand...
Click to collapse
thanks im dowonloading now, hope this works

i downloaded the b707 rom but i put the dload folder and when i try to update it it only appears ../ could it be that the motherboard is dead?

vampvr said:
i downloaded the b707 rom but i put the dload folder and when i try to update it it only appears ../ could it be that the motherboard is dead?
Click to expand...
Click to collapse
finally i take my phone to service and they gave me a new one, they told me that maybe the rom b707 that i installed fried the main board

vampvr said:
finally i take my phone to service and they gave me a new one, they told me that maybe the rom b707 that i installed fried the main board
Click to expand...
Click to collapse
I'm glad you got a replacement!

LATEST TWRP Recovery + Root for lenovo a7000 [Marshmallow][Android 6.0]

Latest TWRP recovery and root for Lenovo a7000 marshmallow firmware.
Download and unzip TWRP and SP Flash tool on PC.
Copy the SuperSU.-v71zip in your phone which you will find in the TWRP .zip file.
Run SP flash tool and In the menu Option tab, go to Download, and put a tick in the DA DL All with Checksum".
choose scatter in the TWRP folder and then select "Download only" and click download.
Now power off the phone and connect the USB cable.
The process will start and after completion, a box will appear with done written on it.
Then Boot into recovery (Power + half a second the two volume buttons).
Now you are on TWRP RECOVERY.
For Rooting: Now select install zip and then navigate to SuperSU-v2.71.zip
reboot.
Download TWRP Recovery 3.0.2-1:click here
Download Latest SP Flash Tool: click here
NOTE: IF YOU ARE USING THIS FOR CUSTOM ROM THEN UNTICK THE BOOT.img IN SPFLASH TOOL WHILE FLASHING THE TWRP OTHERWISE YOUR DEVICE COULD BE IN BOOT LOOP STATE. (FLASH STOCK ROM TO FIX)
FOR STOCK ROM NO NEED TO UNCHECK

Yeah! ☺ Will be trying it later. Thanks for the link.

What about 'CWM Recovery' ?
If one succeeds with this TWRP and rooting, then I think one can change TWRP to CWM using flashify or Rashr, provided he/she should confirm that the 'CWM Recovery' will work on Lenovo A 7000 a with android 6.0 OS. But I do not know if the 'CWM' recovery thatwas used earlier when we were on android 5.0, will still work with android 6.0 or not. Can anybody confirm?

this is working men thanks:angel:

Like a charm
Sent from my Lenovo A7000-a using XDA-Developers mobile app

Lenovo A7000 Marshmallow STOCK FIRMWARE
Flash via spflash tool
http://forum.xda-developers.com/android/development/lenovo-a7000-as223160405-row-andoid-6-0-t3360467/post66404777#post66404777

Does backup and restore works on this twrp?

milankumarn said:
Does backup and restore works on this twrp?
Click to expand...
Click to collapse
Yes it support backup and restore.

Worked for me. Thanks a lot!

I have a big problem ...
Few days ago My phone give me option to update to android 6.0 .(Lenovo a7000)
Downloading update package and press update.
When i press update ,phone is immediatly reboot to twrp and thats it .... That all
Nothing happening... rebooting phone and then get message ,update failing and update package automaticaly erased from phone.
Is anything i doing wrong ?
Thanks ,
Regards from Slovenia

Flashed the recovery as instructed, but when I boot into recovery and select Install, Supersu. Zip does not show up even though it is on the phone.
Please help

chabot said:
I have a big problem ...
Few days ago My phone give me option to update to android 6.0 .(Lenovo a7000)
Downloading update package and press update.
When i press update ,phone is immediatly reboot to twrp and thats it .... That all
Nothing happening... rebooting phone and then get message ,update failing and update package automaticaly erased from phone.
Is anything i doing wrong ?
Thanks ,
Regards from Slovenia
Click to expand...
Click to collapse
Use the stock rom found here to go back to factory settings using the stock marshmallow rom. Make sure that you flash using SP Flash Tool as instructed in the link. This will replace TWRP with stock recovery.
Afterwards, you can reinstall TWRP and root,etc.
Sent from my Lenovo K50-t5 using XDA-Developers mobile app

after flashing and rooting i format my sdcard as internal and i notice that no zip/img file appear on twrp. has anyone encounter the same problem?

Unable to Root!
Flashed the recovery as instructed, but when I boot into recovery and select Install, Supersu. Zip does not show up even though it is on the phone. It shows the folder but not as a Zip file.
Please help

dan_daniel04 said:
Flashed the recovery as instructed, but when I boot into recovery and select Install, Supersu. Zip does not show up even though it is on the phone. It shows the folder but not as a Zip file.
Please help
Click to expand...
Click to collapse
I think you have place the supersu zip in external and locating in internal.
I have tested the recovery and it's working fine

Thanks :good::good::good::good:

Hello any way to root without flashing twrp?

PB1974 said:
Flashed the recovery as instructed, but when I boot into recovery and select Install, Supersu. Zip does not show up even though it is on the phone.
Please help
Click to expand...
Click to collapse
I think you have copied the SuperSU-v71.zip in external storage and in TWRP you are searching in internal storage.If it is so the paste it in internal or change storage selection at the time of installing zip.
And paste the zip in root of the storage not in any folder.
As i can see this is your 1st post.
I think this will help you.

Mounting issue with TWRP
After switching sdcard as internal storage. The file manager only shows the ext. Sdcard so from where we can access the internal Sdcard to put that Supersu.zip.And the TWRP only mount only internal Sdcard. Not able to mount ext. Sdcard plz. Help!

Hey can i flash this supersu.zip via twrp 3.02-1?
Couple hours ago i flashed supersu.zip from lenovo a7000 indonesia group, and all i got was bootloop. Is it possible that with this supersu i could get another bootloop? Thanks