Develop Bugs

Stack at Boot Logo

Hi all and sory about my bad english,
I tryed to flash MIUI rom, and i made a few mistake and now i am stack at boot logo. But it working at bootloader mode. Can anyone help me how to install and run cwm recovery with fastboot commands.

bariskoca said:
Hi all and sory about my bad english,
I tryed to flash MIUI rom, and i made a few mistake and now i am stack at boot logo. But it working at bootloader mode. Can anyone help me how to install and run cwm recovery with fastboot commands.
Click to expand...
Click to collapse
Download the stock firmware and put dload folder in SD card. After that switch OFF the phone. Push at same time power and two volume buttons, phone will reboot in stock recovery and flash of stock ROM will start automatically.
After that you can try again to flash MIUI ROM.

alex.79 said:
Download the stock firmware and put dload folder in SD card. After that switch OFF the phone. Push at same time power and two volume buttons, phone will reboot in stock recovery and flash of stock ROM will start automatically.
After that you can try again to flash MIUI ROM.
Click to expand...
Click to collapse
Is it works even its stock recovery does not work. I mean, i am restarting phone by holding volume up and volume down buttons at the same time but Huawei original recovery mode not working. And would you please give me link of that stock rom.

bariskoca said:
Is it works even its stock recovery does not work. I mean, i am restarting phone by holding volume up and volume down buttons at the same time but Huawei original recovery mode not working. And would you please give me link of that stock rom.
Click to expand...
Click to collapse
I had the same problem after unsuccessfully installing MIUI. Huawei recovery didn't start, it just kept showing MIUI boot logo, and the updater launched but didn't do anything. I managed to get it working by formatting my SD and putting stock rom on it. Then the updater launched, recognised the update.app and the rest went smoothly.

Here you can download stock HUAWEI ROM: http://www.huaweiblog.de/downloads/ascend-p6-downloads/
Recovery which you use to flash MIUI is a temporally. It not affect your stock recovery. On my phone this method work perfect. Push all buttons in same time until stock recovery it start.

kaspars_l said:
I had the same problem after unsuccessfully installing MIUI. Huawei recovery didn't start, it just kept showing MIUI boot logo, and the updater launched but didn't do anything. I managed to get it working by formatting my SD and putting stock rom on it. Then the updater launched, recognised the update.app and the rest went smoothly.
Click to expand...
Click to collapse
Would you please give me link of that update.app file?

alex.79 said:
Here you can download stock HUAWEI ROM: http://www.huaweiblog.de/downloads/ascend-p6-downloads/
Recovery which you use to flash MIUI is a temporally. It not affect your stock recovery. On my phone this method work perfect. Push all buttons in same time until stock recovery it start.
Click to expand...
Click to collapse
Doesnt start huawei recovery. There is only boot logo "HUAWEI Ascend"

bariskoca said:
Would you please give me link of that update.app file?
Click to expand...
Click to collapse
Unzip this and put the dload folder on your SD
http://dl.huaweinews.com/Roms/Ascend-P6/B118.zip

kaspars_l said:
Unzip this and put the dload folder on your SD
http://dl.huaweinews.com/Roms/Ascend-P6/B118.zip
Click to expand...
Click to collapse
I will try it. Thak you very much all.

bariskoca said:
Doesnt start huawei recovery. There is only boot logo "HUAWEI Ascend"
Click to expand...
Click to collapse
Recovery will start a few seconds after HUAWEI logo. But first turn off the phone and after that push and hold all button while recovery start.

kaspars_l said:
Unzip this and put the dload folder on your SD
http://dl.huaweinews.com/Roms/Ascend-P6/B118.zip
Click to expand...
Click to collapse
Unzipped files to sdcard. Restarted phone by holding power button and volume up + volume down buttons. Nothing happend. Still stacked at Boot Logo. Even i cant switch off phone. when i hold power button its only restarting.

Damn, then I have no idea what to do. Lets hope you haven't bricked it and someone can come up with a solution.

kaspars_l said:
Damn, then I have no idea what to do. Lets hope you haven't bricked it and someone can come up with a solution.
Click to expand...
Click to collapse
Oh now something happend. I connected the phone to charge. Then i tryed to recover. First time came up lines from up to down. Tryed again. Now writing on screen but doing nothing;
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is LOCK state.
Then restarted phone by holding power button. HUAWEI recovery worked. But it didnt update phone. I choosed apply update from extenal storage, entered dload directory. But i couldnt see update.app file. Returned back entered again to update from external storage even didnt show dload directory. What should i do now.

Download ROM, unzip and you see dload folder with UPDATE.APP inside. Put dload folder in main directory on SD card via PC. Put the card on the phone. Push all buttons (power, volume up, volume down) at same time while phone is reboot on stock recovery. After that HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0 will find UPDATE.APP in dload folder automatically and flash process will start.

bariskoca said:
Oh now something happend. I connected the phone to charge. Then i tryed to recover. First time came up lines from up to down. Tryed again. Now writing on screen but doing nothing;
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is LOCK state.
Then restarted phone by holding power button. HUAWEI recovery worked. But it didnt update phone. I choosed apply update from extenal storage, entered dload directory. But i couldnt see update.app file. Returned back entered again to update from external storage even didnt show dload directory. What should i do now.
Click to expand...
Click to collapse
Oh, this is where I was stuck for a while. This is where I formatted my SD and copy the dload folder to SD. Then the update happened.

Yes now it worked thanks all of you and xda.
Sent from my HUAWEI P6-U06 using xda app-developers app

[Q] Rooted Huawei ascend P6 bricked

After installing a rooted app, the app asked to reboot the phone in order to complete the driver installation, then after that the phone wont start up and stuck at the logo....:crying: In a panic I wipe data/factory reset and now I got a messege saying
This phone is LOCK state.
E:failed to mount/sdcard (No such file or directory)
There is no UPDATE.APP in /sdcard/dlead or /data/share/0/dload
Huawei SD card update fail.......
cust copying files....
copy cust file successed
FAIL
Please help

kabatinouguy said:
After installing a rooted app, the app asked to reboot the phone in order to complete the driver installation, then after that the phone wont start up and stuck at the logo....:crying: In a panic I wipe data/factory reset and now I got a messege saying
This phone is LOCK state.
E:failed to mount/sdcard (No such file or directory)
There is no UPDATE.APP in /sdcard/dlead or /data/share/0/dload
Huawei SD card update fail.......
cust copying files....
copy cust file successed
FAIL
Please help
Click to expand...
Click to collapse
looks like you have a soft-brick.
Download a Official-Rom, move the Update into the DLOAD-Folder,
go into the original Recovery and let it flash the file.
After this your phone should be starting normally.

kabatinouguy said:
After installing a rooted app, the app asked to reboot the phone in order to complete the driver installation, then after that the phone wont start up and stuck at the logo....:crying: In a panic I wipe data/factory reset and now I got a messege saying
This phone is LOCK state.
E:failed to mount/sdcard (No such file or directory)
There is no UPDATE.APP in /sdcard/dlead or /data/share/0/dload
Huawei SD card update fail.......
cust copying files....
copy cust file successed
FAIL
Please help
Click to expand...
Click to collapse
which app is that

nARDOs said:
which app is that
Click to expand...
Click to collapse
From what i can remember I think it SUPER USER

kabatinouguy said:
From what i can remember I think it SUPER USER
Click to expand...
Click to collapse
Which rooting methode did u use to root ur phone?

nARDOs said:
Which rooting methode did u use to root ur phone?
Click to expand...
Click to collapse
I use ROOT WIZARD method....

This happened to me yesterday as well, I was about to restore apps using TB but the phone frooze and then anything made it boot. I don't know how Exactly I solved it but all I did was:
1.- Flash TWRP v3.01
2.- Wipe all the phone, including system, data, cust and internal sd
3.- From within TWRP flashed STock boot and recovery for 118CN FW.
4.- Placed 118CN UPDATE.APP in external sd/dload
5.- from within TWRP still, rebooted the phone to recovery.
6.- The phone started to flash the update from external SD.
7.- It succeded to flash files but couldn't mount /sdcard so I repeated steps above once more
8.- from stock recovery wipe/factory reset
9.- Tried the update again and voila! Phone succeded and booted just fine... Now it's been running with no issues since 2 days
I was running 118CN FW and a test kernel with some "non tested" or unstable features which I think forced the phone to frooze and then the data corruption...

kabatinouguy said:
I use ROOT WIZARD method....
Click to expand...
Click to collapse
I used eROOT method with HiSuite.
Has never had issues.
Are u on B118cn ?

nARDOs said:
I used eROOT method with HiSuite.
Has never had issues.
Are u on B118cn ?
Click to expand...
Click to collapse
Oh no Im on old one, B116

kabatinouguy said:
Oh no Im on old one, B116
Click to expand...
Click to collapse
Why not move to B125.
less bugs.
Better battery life and smoother...

raolleel said:
looks like you have a soft-brick.
Download a Official-Rom, move the Update into the DLOAD-Folder,
go into the original Recovery and let it flash the file.
After this your phone should be starting normally.
Click to expand...
Click to collapse
Thanks mate my phone is working again........it took me a long time to figure out how to do flashing and everything because I am a beginner but after doing a lot of reading and watching utube I finally have some basic knowledge on unbricking a phone....Thanks again for your information it really helps me alot....

huawei p6
hi i did the same putting official firmware in d load and installed and i rebooted it wright?
---------- Post added at 11:09 AM ---------- Previous post was at 11:04 AM ----------
hi can anyone help my huawei p6 is stuck to the logo
This phone is LOCK state.
E:failed to mount/sdcard (No such file or directory)
There is no UPDATE.APP in /sdcard/dlead or /data/share/0/dload
Huawei SD card update fail.......
cust copying files....
copy cust file successed
FAIL
Please help

jimbo77 said:
This happened to me yesterday as well, I was about to restore apps using TB but the phone frooze and then anything made it boot. I don't know how Exactly I solved it but all I did was:
1.- Flash TWRP v3.01
2.- Wipe all the phone, including system, data, cust and internal sd
3.- From within TWRP flashed STock boot and recovery for 118CN FW.
4.- Placed 118CN UPDATE.APP in external sd/dload
5.- from within TWRP still, rebooted the phone to recovery.
6.- The phone started to flash the update from external SD.
7.- It succeded to flash files but couldn't mount /sdcard so I repeated steps above once more
8.- from stock recovery wipe/factory reset
9.- Tried the update again and voila! Phone succeded and booted just fine... Now it's been running with no issues since 2 days
I was running 118CN FW and a test kernel with some "non tested" or unstable features which I think forced the phone to frooze and then the data corruption...
Click to expand...
Click to collapse
how did you manage to flash the stock boot.img and recovery inside twrp???

huawei
hi thanks how do you flash with trwp? cause i am not that expert please cant use my phone
thanks

You must do it through adb.

ahhhh..
sry
but i can't even install a rom by using the adb sideload command..it fails because of "file_getprop: failed to stat "/system/build.prop": No such file or directory"
what can i do now?
tried to reload the B510..
should i try with a custom ROM?

blueIBI said:
ahhhh..
sry
but i can't even install a rom by using the adb sideload command..it fails because of "file_getprop: failed to stat "/system/build.prop": No such file or directory"
what can i do now?
tried to reload the B510..
should i try with a custom ROM?
Click to expand...
Click to collapse
Flash through adb stock recovery. Extract your sdcard, create on it dload folder using your PC/Laptop. In dload folder put the update.app of the ROM you want and insert back in the device the sdcard. Press volume up + volume down + power button until the HUAWEI logo appears, after that release all the buttons and the phone will start to update the firmware.

Thanks beyond..
Got it finally again..
But it was very tricky..
Had to usw the b507 by reyncla (thanks for sharing)..
I let this for now in my phone..
I tried the Method you mentioned..but i could not reach the phone by ADB directly (in twrp via ADB sideload it worked finally)..
Thanks for answering..maybe i switch sometime back to the b510 or to the official release (when it comes)..
Sent from my P6-U06 using XDA Free mobile app

blueIBI said:
Thanks beyond..
Got it finally again..
But it was very tricky..
Had to usw the b507 by reyncla (thanks for sharing)..
I let this for now in my phone..
I tried the Method you mentioned..but i could not reach the phone by ADB directly (in twrp via ADB sideload it worked finally)..
Thanks for answering..maybe i switch sometime back to the b510 or to the official release (when it comes)..
Sent from my P6-U06 using XDA Free mobile app
Click to expand...
Click to collapse
Great. Enjoy.

Hi,
Probably after select something wrong in TouchRecoveryInstaller-v1_01 i cant start my phone any more.
- PC don't recognize usb via cable
- sd card not detected (apply update from external storage) appears ../ (E:failed to mount /sdcard (No such file of directory).
- wipe data/factory rese - does not help.
- reboot system now - blocks on logo HUAWEI Ascend
Each expert suggestion and idea is welcome and thank you.

[Q] Please Help :(

Hi!
So there is my problem:
I upgraded to KitKat and tryed to install gapps but then everything f* up. So with TWRP I tried to install B125 but it didn't work so I put this B111 on my phone than I tried to install it but it failed and TWRP says that there isn't OS on my phone
Also I don't have any sd card..
What can i do?

maticex said:
Hi!
So there is my problem:
I upgraded to KitKat and tryed to install gapps but then everything f* up. So with TWRP I tried to install B125 but it didn't work so I put this B111 on my phone than I tried to install it but it failed and TWRP says that there isn't OS on my phone
Also I don't have any sd card..
What can i do?
Click to expand...
Click to collapse
Go get an SD CARD from someone and put on it B125 International Version or any other ROM for that matter, and do it fast until your phone runs out of battery. Put update.app in dload folder. You can do it through adb and fastboot, but the safest way is the way that I have just told you. And after that press the Power button and volume up/down at once, all of them until stock recovery starts updating/upgrading... well installing the new ROM, I hope you still have stock recovery.

So when I put it in dload and put it in phone what next?

maticex said:
So when I put it in dload and put it in phone what next?
Click to expand...
Click to collapse
Press the Power button and volume up/down at once, all of them until stock recovery starts. If you only have TWRP find a flashable ROM that is a ZIP, and flash it through TWRP.

ZuperStyler said:
Press the Power button and volume up/down at once, all of them until stock recovery starts. If you only have TWRP find a flashable ROM that is a ZIP, and flash it through TWRP.
Click to expand...
Click to collapse
I have b111.zip in my internal storage if it helps?

maticex said:
I have b111.zip in my internal storage if it helps?
Click to expand...
Click to collapse
You must move it to an SD CARD, get one from someone just to restore your phone.

ZuperStyler said:
You must move it to an SD CARD, get one from someone just to restore your phone.
Click to expand...
Click to collapse
Do you know any B125 firmware which is in zip? not APP. file

maticex said:
Do you know any B125 firmware which is in zip? not APP. file
Click to expand...
Click to collapse
i advise you to flash this ROM, try it. http://forum.xda-developers.com/showthread.php?t=2585783 Must work since you had KitKat, your bootloader must be unlocked. Try CyanogenMod 10.1 following the instructions. But again, use an SD CARD.

ZuperStyler said:
i advise you to flash this ROM, try it. http://forum.xda-developers.com/showthread.php?t=2585783 Must work since you had KitKat, your bootloader must be unlocked. Try CyanogenMod 10.1 following the instructions. But again, use an SD CARD.
Click to expand...
Click to collapse
I'll try probably

maticex said:
I'll try probably
Click to expand...
Click to collapse
Try ? LOL Any ROM is good to put your phone into a workable state. After that, install whatever ROM you like.

I understood that this ROM can be instaled only via CN 118?

maticex said:
I understood that this ROM can be instaled only via CN 118?
Click to expand...
Click to collapse
I had B125 International Locked and then I flashed KitKat, and after that CyanogenMod 10.1 and worked. Now, fell free to try what you want, but if you want to be safe install stock recovery if you don't have it anymore and upgrade from dload folder B125. All the info you want you can find on XDA. Just search what you need.

ZuperStyler said:
I had B125 International Locked and then I flashed KitKat, and after that CyanogenMod 10.1 and worked. Now, fell free to try what you want, but if you want to be safe install stock recovery if you don't have it anymore and upgrade from dload folder B125. All the info you want you can find on XDA. Just search what you need.
Click to expand...
Click to collapse
Do you maybe have original stock recovery file and do I just flash it with TWRP?

maticex said:
Do you maybe have original stock recovery file and do I just flash it with TWRP?
Click to expand...
Click to collapse
But you don't have an OS.
Put your device in fastboot mode ( > adb reboot bootloader )
Extract recovery.img from archive
fastboot flash recovery recovery.img ;
fastboot reboot ;
Tell me what stock recovery do you want.
Place the ZIP with the recovery let's say on Local Disk ( C: ) Create a folder and name it fastboot. Put the recovery ZIP in that folder. After that connect your phone to the PC, now press shift and right click on your mouse or on your laptop and press Open Command Window here. There you write adb bootloader and press enter.
fastboot flash recovery recovery.img ;
fastboot reboot ;

defo just get like a 4gb sd card.

Thank you for all I'm on cm now, but I don't like that I can't take photos with it Can I get camera working?
How can I install normal huawei software now?

Revert to stock recovery first.

How can I do this, I don't find threads with how can i do this?
Can I get Camera working there it says that it is working but on my phone gallery chrashes when I open camera app

Use Camera360, works perfectly.

maticex said:
Hi!
So there is my problem:
I upgraded to KitKat and tryed to install gapps but then everything f* up. So with TWRP I tried to install B125 but it didn't work so I put this B111 on my phone than I tried to install it but it failed and TWRP says that there isn't OS on my phone
Also I don't have any sd card..
What can i do?
Click to expand...
Click to collapse
i done someting similar after trying to put b125 back to phone.. well he was stuck at start with huawei logo..anyway i don`t put on my sd card any zip.. i put on main sdcard the folder "dload" and inside that folder was update.app." file
soo... {my phone was freezeing with huawei logo not opening up anymore so i put that folder on sdcard useing diferent phone then i connect phone to usb and hold power putton this way that logo with huaway disear and phone restarted.in that moment i take off finger from power button .and then holding the volume plus minus and again power button . anyway not sure if was needed to conect phone at usb to restart it but for me works }
i done nothing more.. nothing on computer.. the instalation of b125 works normaly directly from that recovery menu

[Q] Stuck in boot, need help

Hello,
I'm looking for help as I have exhausted all of my search on google and xda developers and the answer doesn't seem to be there. I'm afraid I might be unable to get out of this one.
I have a huawei ascend P6-U06 I bought it and it came with the international firmware, I had rooted it and flashed miui v5 into my phone, everything was fine but one thing, I was unable to use themer, so about 3 days ago I finally decided to flash omni rom.
I downloaded omni rom and installed CWM recovery and once into the system I selected the zip from my sd card and flashed it, only to find that the phone would not go pass the first screen (stuck in boot and could not be shutdown or anything)
Since I did not do a TWRP recovery (and I don't know how, I'm just a beginner) I was unable to do anything other than the "3 button method" so I looked and found that I could put the UPDATE.APP file on the dload folder and it should work, so I tried it and the UPDATE.APP firmware version is the B125, all good I think this was the Chinese version but it had English and other languages as well, but Chinese seemed to be the main one.
Anyways I had the phone back and it did an update, after the update everything was working fine, I deleted the dload file from the sd card, also I saw that the "system" or the phone itself created a dload file on the internal storage but then once I had themer on the phone I saw myself that I hated the emotion ui and in the first place that was the reason I had put miui into my phone, I still wanted to try omni rom and persistently I tried a second time.
Now this time since I already new that I could just do the dload thingy I thought (what could happen) so I tried again with CWM to flash the omni rom (the latest version) but it gave me an error saying something like the installation was aborted or something like that.
So I went back to having the phone stuck in boot, I put the B125 UPDATE.APP and created a dload folder on the sd card, but when doing the "3 button method" the system gave me an error, I tried downloading the B122 and the B132 and also the B510 but although I have put the UPDATE.APP on the dload folder it just doesn't do it's magic like it previously did.
Now I don't really have money to buy another phone, if I did I would just buy another one (I like the p7) but I don't so I need to fix this issue otherwise I don't have a phone.
Please help me, I'd appreciate if you can do your best explaining as I'm dumb in this matter, (just a beginner as said before) Also I'm attaching a picture of the error message being received when entering the system recovery through the "3 button method"
Thanks for all of your time, I DO appreciate your help and if you have any questions please just ask! I really need to fix this!

DanRioja said:
Hello,
I'm looking for help as I have exhausted all of my search on google and xda developers and the answer doesn't seem to be there. I'm afraid I might be unable to get out of this one.
I have a huawei ascend P6-U06 I bought it and it came with the international firmware, I had rooted it and flashed miui v5 into my phone, everything was fine but one thing, I was unable to use themer, so about 3 days ago I finally decided to flash omni rom.
I downloaded omni rom and installed CWM recovery and once into the system I selected the zip from my sd card and flashed it, only to find that the phone would not go pass the first screen (stuck in boot and could not be shutdown or anything)
Since I did not do a TWRP recovery (and I don't know how, I'm just a beginner) I was unable to do anything other than the "3 button method" so I looked and found that I could put the UPDATE.APP file on the dload folder and it should work, so I tried it and the UPDATE.APP firmware version is the B125, all good I think this was the Chinese version but it had English and other languages as well, but Chinese seemed to be the main one.
Anyways I had the phone back and it did an update, after the update everything was working fine, I deleted the dload file from the sd card, also I saw that the "system" or the phone itself created a dload file on the internal storage but then once I had themer on the phone I saw myself that I hated the emotion ui and in the first place that was the reason I had put miui into my phone, I still wanted to try omni rom and persistently I tried a second time.
Now this time since I already new that I could just do the dload thingy I thought (what could happen) so I tried again with CWM to flash the omni rom (the latest version) but it gave me an error saying something like the installation was aborted or something like that.
So I went back to having the phone stuck in boot, I put the B125 UPDATE.APP and created a dload folder on the sd card, but when doing the "3 button method" the system gave me an error, I tried downloading the B122 and the B132 and also the B510 but although I have put the UPDATE.APP on the dload folder it just doesn't do it's magic like it previously did.
Now I don't really have money to buy another phone, if I did I would just buy another one (I like the p7) but I don't so I need to fix this issue otherwise I don't have a phone.
Please help me, I'd appreciate if you can do your best explaining as I'm dumb in this matter, (just a beginner as said before) Also I'm attaching a picture of the error message being received when entering the system recovery through the "3 button method"
Thanks for all of your time, I DO appreciate your help and if you have any questions please just ask! I really need to fix this!
Click to expand...
Click to collapse
So first of all DON'T ever use CWM on our phone because its not really good to use! Always use TWRP.
Than second when you want to install a KK ROM like OMNI you have to update first via update.app to a KK firmware, then install TWRP and so on. This is all described in the first post in the OMNI thread.
Third and this is your problem now you have an modified build.prop in your ROM so the recovery will not update you have to push an stock unmodified build.prop via fastboot, that's the only method I think. How to push that with fastboot there you will find something on google.
Good luck

try this
DanRioja said:
Hello,
I'm looking for help as I have exhausted all of my search on google and xda developers and the answer doesn't seem to be there. I'm afraid I might be unable to get out of this one.
I have a huawei ascend P6-U06 I bought it and it came with the international firmware, I had rooted it and flashed miui v5 into my phone, everything was fine but one thing, I was unable to use themer, so about 3 days ago I finally decided to flash omni rom.
I downloaded omni rom and installed CWM recovery and once into the system I selected the zip from my sd card and flashed it, only to find that the phone would not go pass the first screen (stuck in boot and could not be shutdown or anything)
Since I did not do a TWRP recovery (and I don't know how, I'm just a beginner) I was unable to do anything other than the "3 button method" so I looked and found that I could put the UPDATE.APP file on the dload folder and it should work, so I tried it and the UPDATE.APP firmware version is the B125, all good I think this was the Chinese version but it had English and other languages as well, but Chinese seemed to be the main one.
Anyways I had the phone back and it did an update, after the update everything was working fine, I deleted the dload file from the sd card, also I saw that the "system" or the phone itself created a dload file on the internal storage but then once I had themer on the phone I saw myself that I hated the emotion ui and in the first place that was the reason I had put miui into my phone, I still wanted to try omni rom and persistently I tried a second time.
Now this time since I already new that I could just do the dload thingy I thought (what could happen) so I tried again with CWM to flash the omni rom (the latest version) but it gave me an error saying something like the installation was aborted or something like that.
So I went back to having the phone stuck in boot, I put the B125 UPDATE.APP and created a dload folder on the sd card, but when doing the "3 button method" the system gave me an error, I tried downloading the B122 and the B132 and also the B510 but although I have put the UPDATE.APP on the dload folder it just doesn't do it's magic like it previously did.
Now I don't really have money to buy another phone, if I did I would just buy another one (I like the p7) but I don't so I need to fix this issue otherwise I don't have a phone.
Please help me, I'd appreciate if you can do your best explaining as I'm dumb in this matter, (just a beginner as said before) Also I'm attaching a picture of the error message being received when entering the system recovery through the "3 button method"
Thanks for all of your time, I DO appreciate your help and if you have any questions please just ask! I really need to fix this!
Click to expand...
Click to collapse
hi there. try to boot with adb shell in fastboot mode.
if you have b111,125,132,118 etc you need twrp for jelly bean.
after that install twrp recovery and wipe system, data, cache, dalvik.
then reinstall stock recovery also via fastboot and then you can install update.app from dload.
if you want omni you have to update to official b510 because it repartitions your device, then flash omni via twrp.
don't use cwm again

adipaval said:
hi there. try to boot with adb shell in fastboot mode.
if you have b111,125,132,118 etc you need twrp for jelly bean.
after that install twrp recovery and wipe system, data, cache, dalvik.
then reinstall stock recovery also via fastboot and then you can install update.app from dload.
if you want omni you have to update to official b510 because it repartitions your device, then flash omni via twrp.
don't use cwm again
Click to expand...
Click to collapse
Hey thank you for the quick response, could you send me a link with the steps? as I said before I'm really just a beginner so I don't understand much, I mean I don't know what adb shell is, and how to enter the fastboot mode. I'd appreciate if you could help me with that!
Thanks

try this
sorry for the late response, i've been very busy.
you must have hisuite installed because you need the drivers.
so first you have to put your phone in download mode. you do this by starting your phone with vol down pressed. (it will remain on the ascend logo) and in windows you should see a quick removable device.
you need twrp recovery for jelly bean from here (the twrp2.6.x.x. IMG file ) http://forum.xda-developers.com/showthread.php?t=2534420
put the downloaded twrp2.6.3.3.img file in the folder which you'll extract from the attached zip of this post
in the fastboot folder shif+right click - start command windows here
type adb reboot bootloader - it will start the service then display error device not founde
type fastboot flash recovery "and the nameof the recovery ex. twrp2.6.3.3.img" - it should sai ok
safely remove device from windows and reboot your phone.
then you should be able to boot in twrp and clear system, data, cache, dalvik cache. this will let your phone without an operating system so either you install a custom jelly bean or put via twrp the stock recovery back (you cand find on the same page linked above) and then install stock jelly bean via dload folder.
P.S. from what I see in your screenshot, did you put an update.zip in hwouc folder on sdcard? hwouc is the folder where phone saves updates downloaded via ota then installs them from recovery.
are you sure you put update.APP in dload folder?
hope I helped

adipaval said:
sorry for the late response, i've been very busy.
you must have hisuite installed because you need the drivers.
so first you have to put your phone in download mode. you do this by starting your phone with vol down pressed. (it will remain on the ascend logo) and in windows you should see a quick removable device.
you need twrp recovery for jelly bean from here (the twrp2.6.x.x. IMG file ) http://forum.xda-developers.com/showthread.php?t=2534420
put the downloaded twrp2.6.3.3.img file in the folder which you'll extract from the attached zip of this post
in the fastboot folder shif+right click - start command windows here
type adb reboot bootloader - it will start the service then display error device not founde
type fastboot flash recovery "and the nameof the recovery ex. twrp2.6.3.3.img" - it should sai ok
safely remove device from windows and reboot your phone.
then you should be able to boot in twrp and clear system, data, cache, dalvik cache. this will let your phone without an operating system so either you install a custom jelly bean or put via twrp the stock recovery back (you cand find on the same page linked above) and then install stock jelly bean via dload folder.
P.S. from what I see in your screenshot, did you put an update.zip in hwouc folder on sdcard? hwouc is the folder where phone saves updates downloaded via ota then installs them from recovery.
are you sure you put update.APP in dload folder?
hope I helped
Click to expand...
Click to collapse
Hey, I was trying to follow the instructions, but somehow this is not working, I mean the hisuite is stock searching the drivers and once I type adb reboot bootloader it just says not found. but doesn't do anything.
As for the screenshot I found it online, it's the closest thing to the error presented, but I did put the UPDATE.APP on the dload folder
The error I get first it gives me some sort of error which disappears once the Android system recovery menu comes up. then the only thing I'm able to see says:
Checking Module MD5RSA.. OK
Checking Module CRC.... OK
Checking Module CURVER.... OK
Checking Module VERLIST....
Huawei SD card update fail.....
cust copying files...
copy cust files successed!
===================
FAIL
===================
EDIT: I'm updating the actual picture of the error received.

Not found as in command not found or what? Post print screen please
Sent from my HUAWEI P6-U06 using XDA Free mobile app

adipaval said:
Not found as in command not found or what? Post print screen please
Sent from my HUAWEI P6-U06 using XDA Free mobile app
Click to expand...
Click to collapse
Here's the screenshot!

Did you see that you wrote abd instead of adb?
Sent from my HUAWEI P6-U06 using XDA Free mobile app

adipaval said:
Did you see that you wrote abd instead of adb?
Sent from my HUAWEI P6-U06 using XDA Free mobile app
Click to expand...
Click to collapse
My bad, although with adb is still not working lol.

mine is working
DanRioja said:
My bad, although with adb is still not working lol.
Click to expand...
Click to collapse
i downloaded zip from before to be sure.
i see in my console that it runs as administrator, i think that's the reason why yours is not working.

adipaval said:
i downloaded zip from before to be sure.
i see in my console that it runs as administrator, i think that's the reason why yours is not working.
Click to expand...
Click to collapse
I have a question, could it have something to do with the drivers not being installed? I mean I installed the hi-suite but it never installed the drivers, so I'm wondering if that could be the reason, or could it be due to the phone not booting and not having TWRP?

DanRioja said:
I have a question, could it have something to do with the drivers not being installed? I mean I installed the hi-suite but it never installed the drivers, so I'm wondering if that could be the reason, or could it be due to the phone not booting and not having TWRP?
Click to expand...
Click to collapse
EDIT: I'm uploading the picture, I tried with administrator, still not working.

If it says device not found it means adb started but cannot find device.
It is ok because in download mode you cannot enable usb debugging so that adb sees it but if you type to flash the twrp.img it should work. At least on mine it did
Be sure you started phone in download mode by powering it on with vol down pressed. Press it longer just to be sure
Sent from my HUAWEI P6-U06 using XDA Free mobile app

adipaval said:
If it says device not found it means adb started but cannot find device.
It is ok because in download mode you cannot enable usb debugging so that adb sees it but if you type to flash the twrp.img it should work. At least on mine it did
Be sure you started phone in download mode by powering it on with vol down pressed. Press it longer just to be sure
Sent from my HUAWEI P6-U06 using XDA Free mobile app
Click to expand...
Click to collapse
Hmm it's weird, I tried to skip the first step " adb reboot bootloader" and went to the second step, this is what I got (check the picture)

.img
DanRioja said:
Hmm it's weird, I tried to skip the first step " adb reboot bootloader" and went to the second step, this is what I got (check the picture)
Click to expand...
Click to collapse
that's because you did not write .img
fastboot flash recovery twrp_2_6_3_3_recovery.img

DanRioja said:
Hmm it's weird, I tried to skip the first step " adb reboot bootloader" and went to the second step, this is what I got (check the picture)
Click to expand...
Click to collapse
Hello !
Please follow this steps from here !
Because adb not working, you can put your device in bootloader mode manually : press and keep at the same time for about 10~15 sec. power button and volume down , now your device are in bootloader mode and you can use "fastboot" command to flash stock/twrp recovery !
If your device was on Android JB you must use stock/twrp forAndroid JB, else if your device was on Android KitKat you must use stock/twrp for Android KitKat .
The next time when you want to flash something in your device please do your research more - because here on XDA you have almost all the answers to every question - sure, you need to spend some time to read - and not ultimately you can ask , if you are not 100% sure what to do
Good luck !

surdu_petru said:
Hello !
Please follow this steps from here !
Because adb not working, you can put your device in bootloader mode manually : press and keep at the same time for about 10~15 sec. power button and volume down , now your device are in bootloader mode and you can use "fastboot" command to flash stock/twrp recovery !
If your device was on Android JB you must use stock/twrp forAndroid JB, else if your device was on Android KitKat you must use stock/twrp for Android KitKat .
The next time when you want to flash something in your device please do your research more - because here on XDA you have almost all the answers to every question - sure, you need to spend some time to read - and not ultimately you can ask , if you are not 100% sure what to do
Good luck !
Click to expand...
Click to collapse
I'm going to give it a try. thanks!

Stuck in boot, Will pay whoever solves the issue and provides me a step by step fix

Hello,
I'm looking for help as I have exhausted all of my search on google and xda developers and the answer doesn't seem to be there. I'm afraid I might be unable to get out of this one.
I have a huawei ascend P6-U06 I bought it and it came with the international firmware, I had rooted it and flashed miui v5 into my phone, everything was fine but one thing, I was unable to use themer, so about 3 days ago I finally decided to flash omni rom.
I downloaded omni rom and installed CWM recovery and once into the system I selected the zip from my sd card and flashed it, only to find that the phone would not go pass the first screen (stuck in boot and could not be shutdown or anything)
Since I did not do a TWRP recovery (and I don't know how, I'm just a beginner) I was unable to do anything other than the "3 button method" so I looked and found that I could put the UPDATE.APP file on the dload folder and it should work, so I tried it and the UPDATE.APP firmware version is the B125, all good I think this was the Chinese version but it had English and other languages as well, but Chinese seemed to be the main one.
Anyways I had the phone back and it did an update, after the update everything was working fine, I deleted the dload file from the sd card, also I saw that the "system" or the phone itself created a dload file on the internal storage but then once I had themer on the phone I saw myself that I hated the emotion ui and in the first place that was the reason I had put miui into my phone, I still wanted to try omni rom and persistently I tried a second time.
Now this time since I already new that I could just do the dload thingy I thought (what could happen) so I tried again with CWM to flash the omni rom (the latest version) but it gave me an error saying something like the installation was aborted or something like that.
So I went back to having the phone stuck in boot, I put the B125 UPDATE.APP and created a dload folder on the sd card, but when doing the "3 button method" the system gave me an error, I tried downloading the B122 and the B132 and also the B510 but although I have put the UPDATE.APP on the dload folder it just doesn't do it's magic like it previously did.
Now I don't really have money to buy another phone, if I did I would just buy another one (I like the p7) but I don't so I need to fix this issue otherwise I don't have a phone.
The error I get first it gives me some sort of error which disappears once the Android system recovery menu comes up. then the only thing I'm able to see says:
Checking Module MD5RSA.. OK
Checking Module CRC.... OK
Checking Module CURVER.... OK
Checking Module VERLIST....
Huawei SD card update fail.....
cust copying files...
copy cust files successed!
===================
FAIL
===================
Please help me, I'd appreciate if you can do your best explaining as I'm dumb in this matter, (just a beginner as said before) Also I'm attaching a picture of the error message being received when entering the system recovery through the "3 button method"
And as I said on the tittle, I will pay whoever helps me to solve this issue, I need a step by step (with a good explanation if possible) on how to fix it, I will pay $60 via paypal to the person that provides me with the solution.
Thanks for all of your time, I DO appreciate your help and if you have any questions please just ask! I really need to fix this!

Ok, first of all, your picture shows that you already have the KitKat recovery.
Which version of B510 have you downloaded? Is it the update.zip? I'm assuming it is...
Please download the complete update package from here: http://www.huaweidevice.ro/user/con...001C00B510_Firmware_Android 4-4_EMUI--2-3.zip
That is the official, and full firmware update from Huawei Romania.
Once your download has completed, unzip the zip file, and copy the dload folder onto your sd card.
BEFORE placing your sd card back in your phone, try the 3 button method again. You should get into recovery mode, then do a data/factory reset, and clear cache.
Once that is done, put your sd card back in your phone, reboot your device, and reboot using the 3 button method.
Hopefully this will work.
If it fails again, you need to try formatting your sd card, and do the steps above again, without doing a factory reset.

Dear op.... Did you solve your problem? How?

miz_pimp said:
Ok, first of all, your picture shows that you already have the KitKat recovery.
Which version of B510 have you downloaded? Is it the update.zip? I'm assuming it is...
Please download the complete update package from here: http://www.huaweidevice.ro/user/con...001C00B510_Firmware_Android 4-4_EMUI--2-3.zip
That is the official, and full firmware update from Huawei Romania.
Once your download has completed, unzip the zip file, and copy the dload folder onto your sd card.
BEFORE placing your sd card back in your phone, try the 3 button method again. You should get into recovery mode, then do a data/factory reset, and clear cache.
Once that is done, put your sd card back in your phone, reboot your device, and reboot using the 3 button method.
Hopefully this will work.
If it fails again, you need to try formatting your sd card, and do the steps above again, without doing a factory reset.
Click to expand...
Click to collapse
I tried it but it's still not working. :/

blackrose1 said:
Dear op.... Did you solve your problem? How?
Click to expand...
Click to collapse
I"m still looking for a solution, actually it's been so long that I'm offering to pay whoever provides me with the solution

Try what I did here to solve a similar problem that I had: http://forum.xda-developers.com/showpost.php?p=54124890&postcount=18

sko4a said:
Try what I did here to solve a similar problem that I had: http://forum.xda-developers.com/showpost.php?p=54124890&postcount=18
Click to expand...
Click to collapse
I have a question, how can I install TWRP if the adb fastboot is not recognizing my phone? I think it's because I'm missing the drivers but I haven't been able to find them.

DanRioja said:
I have a question, how can I install TWRP if the adb fastboot is not recognizing my phone? I think it's because I'm missing the drivers but I haven't been able to find them.
Click to expand...
Click to collapse
Don't you just need Hisuite, the driver who comes with the phone when you plug in your USB cable? That made asb fastboot to recognize my phone at least.

You don't need ADB, only fastboot. Shut down the phone. Then hold the Vol- button and plug in the usb cable. Release the button after the you see the AscendP6 logo - now you are in fastboot and can flash TWRP. Windows Update should install the drivers (I've never installed HiSuite), just let it search online.

First delete your sd card to FAT32 not NTFS and put update.app to dload folder. then dowbload: http://forum.xda-developers.com/showthread.php?t=2765202
Power up your phone with volume down. and use Huawei tool kit from that link. select KitKat , unlock bootleder first from dropdown menu, then install stock recovery.
And try to update from stock recovery "3 buttons method"

ADHDDHDA said:
First delete your sd card to FAT32 not NTFS and put update.app to dload folder. then dowbload: http://forum.xda-developers.com/showthread.php?t=2765202
Power up your phone with volume down. and use Huawei tool kit from that link. select KitKat , unlock bootleder first from dropdown menu, then install stock recovery.
And try to update from stock recovery "3 buttons method"
Click to expand...
Click to collapse
Hey so far this is the most promising option I've gotten, the only problem is when I go to unlock bootloader it's giving me an error that says "error phone not connected" I've tried getting the drivers from many different ways, one from the hi suite, another letting windows look for it, the other one was I downloaded a .exe named "driver tools" but it doesn't work either, when I connect the phone it does make the sound just as when you connect any device on USB but other than that it doesn't recognizes it on the huawei toolkit. Any ideas?
sko4a said:
You don't need ADB, only fastboot. Shut down the phone. Then hold the Vol- button and plug in the usb cable. Release the button after the you see the AscendP6 logo - now you are in fastboot and can flash TWRP. Windows Update should install the drivers (I've never installed HiSuite), just let it search online.
Click to expand...
Click to collapse
I only get to see this screen: http://s3.amazonaws.com/f01.justanswer.com/JACUSTOMERd2wl5hbc/2013-01-26_122110_huawei.jpg
Tungieee said:
Don't you just need Hisuite, the driver who comes with the phone when you plug in your USB cable? That made asb fastboot to recognize my phone at least.
Click to expand...
Click to collapse
I've tried with the hi suite, downloading a .exe driver named "driver tools" and having windows look for the driver, but it doesn't recognizes it, I mean when I connect the phone it does make the sound when you're connecting something but other than that the adb is not recognizing the phone.

I had a similar problem but for me it would say verlist fail. However you should try this anyway if you haven't already: http://forum.xda-developers.com/showpost.php?p=52744051&postcount=23
What is important is that you use the recovery in that specific post. That's what fixed it for me.

blacklord9 said:
I had a similar problem but for me it would say verlist fail. However you should try this anyway if you haven't already: http://forum.xda-developers.com/showpost.php?p=52744051&postcount=23
What is important is that you use the recovery in that specific post. That's what fixed it for me.
Click to expand...
Click to collapse
I have a question, how can I flash the stock recovery? I mean I have tried with the adb fastboot but it doesn't recognizes the phone :/

Try this methode, it defently works!!! I had EXACT the same problem! P.s. You dont need to flash a other recovery!!!!!!!!!!
http://forum.xda-developers.com/showthread.php?t=2781977