[Q] Stuck on bootscreen - Wildfire Q&A, Help & Troubleshooting

Hey, My phone was working fine till yesterday. N when i tried to flash dk froyo .i had to change the kernel and i guess the bootscreen(htc logo) freezed because of that. I tried flashing hcdr and other kernels and even changed rom back to cm 7.But nothing seems to help.Only cwm is working on my phone. CAn someone help me please

btw its a wildfire

Your best bet Is to try run a ruu as that would reset the phone back to stock, bootloader and kernal, but depending on how you s-offed you may lose the ability to root.( untill you s-off again.) Good luck
sent from my steroid powered, cyanogenmod filled wrecking machine! using xda app.

Perform a full wipe (In CWM, Select "Data Wipe / Factory Reset", then, staying in CWM, go to Mounts and Storage, Select "Format /system". After this, flash a ROM (any) and check if it boots.

Tried. Its still not working. Can any1 post a nandroid backup file of any rom for wildfire. Please. I formatted my sd card too by mistake.

and while flashing a ruu. it always shows a error E:Failure at line 65 and something. Its different everytime

Connect your Wildfire to your PC, In CWM, Go to Mounts and Storage, and Select "Mount USB Storage". This will activate Mass Storage Mode and you can access your SDCard on your PC as normal. (I don't think anyone would upload a Nandroid backup of his own, it contains personal stuff like contacts and all. But, if someone does, good for you)

i mount usb storage n then do wat..? i tried flashing every rom possible. But its still not working. Is it the kernel's problem or what??

I am pretty certain performing a full wipe (Following options in CWM - 1: Data Wipe - Factory Reset, along with 2: Wipe Cache Partition, 3: Format /cache, 4: Format /system, 5: Format /data, 6: Wipe cache partition, 7: Wipe Dalvik Cache) in CWM and flashing a fresh ROM will fix your issue, UNLESS your phone is not bricked due to bad flash, but since you already claim that you have done that, I can't help you any further on this.
EDIT - Also one more thing - When you flash the kernel / ROM, do you get a confirmation message "Installation Complete"? What is your CWM version?

Yes i do.it says installation comple and its v3.0.0.6

Sense ROM's like DK will not work on CWM versions above 2.x.x.x. Anyway, since you tried CM7 already, One last suggestion in that case would be to try flashing the RUU via the bootloader.
Steps -
1: Download the RUU you want to install
2: Extract the rom.zip from the RUU. Procedure here
3: Once you have that rom.zip, Rename it to PC49IMG.zip
4: Transfer this to the root of your SDCard (i.e. - Not in any folders / sub-folders)
5: Restart device in HBoot Mode (Press Vol Down + Power simultaneously)
6: It will scan for the file, and ask to install. Follow On-Screen instructions.

Ill give it a try.

owe you big time man..Thanx a lot..

Return of the Jedi, Yoda is the man.
" once its gone,its GONE."

stuck at htc logo
cRo77y said:
Hey, My phone was working fine till yesterday. N when i tried to flash dk froyo .i had to change the kernel and i guess the bootscreen(htc logo) freezed because of that. I tried flashing hcdr and other kernels and even changed rom back to cm 7.But nothing seems to help.Only cwm is working on my phone. CAn someone help me please
Click to expand...
Click to collapse
search for syed zain ahmed on utube and see his video.. i cant post a link to the video coz i am new , after 10 post i will be able to post the link ... it helped me alot.. do try that method.

syed_786 said:
search for syed zain ahmed on utube and see his video.. i cant post a link to the video coz i am new , after 10 post i will be able to post the link ... it helped me alot.. do try that method.
Click to expand...
Click to collapse
Are you him by any chance?
Sent from my locked, tampered ville

wow, this is quite the thread revival, 2011 was ages ago....

help
Help?
or can anyone help me when I tried to install Custom MTD Partitions I'm stuck whit htc screen all to me erase what to do now when I want to install a new room again stuck please help I already tried all I do not have nor restore any deleted by mistake help

Related

Phone not working after installing metamorph theme

I am way over my head with this problem:
I rooted my phone yesterday and installed metamorph on my motorola defy.
After that i tried installing a new theme. It installed and the phone rebooted but the interface is no longer working. It only shows some "force close" warnings for android.process.media, process com.android.bluetooth, process com.android.setupwizard etc... Now it won't let me use my phone at all. I don't have a recovery made and i tried master rebooting but it still doesn't work. Can anyone help me somehow?
I was looking for some update.zip files to recover from sd card. i don't know if it's good, that's why i've posted here...
PS: Sorry for my bad english
The only thing u need to do is to get into recovery and wipe settings and cache partition. Thats it. Follow this post : http://forum.xda-developers.com/showthread.php?t=855962 . It shall show u how to get into factory recovery mode. That is if u are on eclair. If u are on froyo, follow same procedure, only when u see triangle, press both volume up and volume down in same time to get into menu.
Second thing u could do is to reinstall original firmware following this post: http://forum.xda-developers.com/showthread.php?t=853674 .
Thank you for the answer.
I already tried factory reset, i think the theme overrided some original files so the cache wipe settings and cache partition is not working, it still shows those errors after reboot. I will try the other methods and see what will happpen.

[Q] Looking for help with a Desire Stck on load screen.

Hi guy`s looking for some help with and HTC Desire that is stuck on the TMobile UK load screen.
I have tried a few methods to try and get it back to life but without success.
I originally used the Gingerbeard release from HTC to upgrade the phone but after finding it left me with almost no memory to download apps etc I decided to revert back to stock rom RUU_Bravo_TMO_UK_1.15.110.11_Radio_32.30.00.28U_4.05.00.11_release_122755
After completing this , my phone now turns on and sticks on a screen with a small pink circle.
Before loading the stock rom I gained s-off and created a Naand back up using Unrevocked as I was having issues with the RUU above.
From what I have been reading I have a PVT4 device and the clockworkmod is unsutaible.
I have now downgraded the bootlaoder to AlphaRev Unlock and loaded Recovery-RA-desire-v2.0.0 but when I click onto recovery my phone still just go`s to the pink circle screen again.
When booted into HBOOT the screen shows..
AlphaRev Unlock
Bravo PVT4 SHIP S-OFF
HBOOT 6.93.9999
MICROP 051d
TOUCH PANEL-SYNT0101
RADIO 4.05.00.11
aUG 10 2010 17.52.18
HBOOT
Parsing....[SD.ZIP]
[1] BOOTLOADER
Do you want to start update?
YES
NO.
Could some kind sole please advise me where I am going wrong. If needed I can list what is on my SD card etc etc.
Thanks very much if you can help me. I am a bit stuck with this one and having to revert back to my HTC Hero is a bit of a pain in the hole.
my guide, advanced boot problems S-OFF. I didn't think it'd be that hard to find..
bortak said:
my guide, advanced boot problems S-OFF. I didn't think it'd be that hard to find..
Click to expand...
Click to collapse
it was very easy to find m8 and helped me downgrade the bootloader. My device is PVT4 which in the guide it says to stick to "Flashing Custom Recovery". Unfortunately I am having problems getting Android Flasher to run on my pc. I will try on my netbook later.
At present I can boot into fastboot but when I chose recovery to try and flash Amon Ra`s recovery image I just return to to pink circle logo.
I must admit I am getting a bit mixed up as to what stage I am currently at as I have tried a few different methods from your troubleshoot guide.
Thanks for your help, I will continue to read up on the subject over the next few days and hopefully be able to get my handset back to life.
Ned_Stevens said:
it was very easy to find m8 and helped me downgrade the bootloader. My device is PVT4 which in the guide it says to stick to "Flashing Custom Recovery". Unfortunately I am having problems getting Android Flasher to run on my pc. I will try on my netbook later.
At present I can boot into fastboot but when I chose recovery to try and flash Amon Ra`s recovery image I just return to to pink circle logo.
I must admit I am getting a bit mixed up as to what stage I am currently at as I have tried a few different methods from your troubleshoot guide.
Thanks for your help, I will continue to read up on the subject over the next few days and hopefully be able to get my handset back to life.
Click to expand...
Click to collapse
if android flasher doesn't work try fastboot commander.. you need android SDK set up though, its not that hard, just look at resources its there
bortak said:
if android flasher doesn't work try fastboot commander.. you need android SDK set up though, its not that hard, just look at resources its there
Click to expand...
Click to collapse
Hi Bortak, took things back step or two and I have now managed to gain access to recovery using Fastboot Commander.
I have flashed update-cm-7.10-Desire-signed.zip everything seemed ok then when I rebooted the phone I went straight back to the pink circle screen. I accessed the recovery twice through fast commander without any problems now it`s not letting me get into recovery again lol Oh Well back to the drawing board.
Thanks again for your help
bortak said:
if android flasher doesn't work try fastboot commander.. you need android SDK set up though, its not that hard, just look at resources its there
Click to expand...
Click to collapse
Hi mate sorry for bothering you but I have managed to get back into recovery, could you give me a couple of pointers as to what to do next. I am able to get access through fastboot commander and recovery image RA-Desire-v2.0.0 but as I say any time I try to load the rom I mentioned above it go`s through the update process then dumps me back to the pink circle screen.
I am obviously missing something that I cannot quite put my finger on. I am normally quite good with things like this as I used to be able to flash images etc on to Linux D-Box`s but this really has me stumped.
I am going to try a few different roms but something is telling me that I need to go back to a stock rom, would this be correct?
Thanks again and sorry for being a total pain.
Ned_Stevens said:
Hi mate sorry for bothering you but I have managed to get back into recovery, could you give me a couple of pointers as to what to do next. I am able to get access through fastboot commander and recovery image RA-Desire-v2.0.0 but as I say any time I try to load the rom I mentioned above it go`s through the update process then dumps me back to the pink circle screen.
I am obviously missing something that I cannot quite put my finger on. I am normally quite good with things like this as I used to be able to flash images etc on to Linux D-Box`s but this really has me stumped.
I am going to try a few different roms but something is telling me that I need to go back to a stock rom, would this be correct?
Thanks again and sorry for being a total pain.
Click to expand...
Click to collapse
Did you do a full wipe before you flashed?
Full wipe:
/mounts & storage
> format boot
> format cache
> format system
> format data
> format sd-ext
Also, since you're S-OFF, make sure you have the correct SPL/hboot... Cyanogen Will run on everything BUT Oxygen hboot.
bortak said:
Did you do a full wipe before you flashed?
Full wipe:
/mounts & storage
> format boot
> format cache
> format system
> format data
> format sd-ext
Also, since you're S-OFF, make sure you have the correct SPL/hboot... Cyanogen Will run on everything BUT Oxygen hboot.
Click to expand...
Click to collapse
Hi mate, at present my handset is sitting in the Android System Recovery , My options are..
Reboot System Now
USB-MS toggle
Back Up/Restore
Flash zip from sdcard
Wipe
Partition sdcard
Mounts
Other
Power Off
I dont have the option for mounts & storage. If I go into mounts I have this list...
Mount /storage
Unmount Cache
Mount /data
Mount /sd-ext
Mount /sdcard
If I use the Wipe option I get an option to....
Wipe All Userdata
Wipe only /data
Wipe only /sd-ext
Wipe only /sdcard/ .android secure
Wipe only /cache
Wipe only Dalvik-cache
Wipe only battery stats
Wipe only rotate settings.
I have no option to format anything just the Wipe all userdata which is the closest thing to what I am looking to do. Would this be correct ?
Thanks again m8 I really appreciate your help.
Ned_Stevens said:
Hi mate, at present my handset is sitting in the Android System Recovery , My options are..
Reboot System Now
USB-MS toggle
Back Up/Restore
Flash zip from sdcard
Wipe
Partition sdcard
Mounts
Other
Power Off
I dont have the option for mounts & storage. If I go into mounts I have this list...
Mount /storage
Unmount Cache
Mount /data
Mount /sd-ext
Mount /sdcard
If I use the Wipe option I get an option to....
Wipe All Userdata
Wipe only /data
Wipe only /sd-ext
Wipe only /sdcard/ .android secure
Wipe only /cache
Wipe only Dalvik-cache
Wipe only battery stats
Wipe only rotate settings.
I have no option to format anything just the Wipe all userdata which is the closest thing to what I am looking to do. Would this be correct ?
Thanks again m8 I really appreciate your help.
Click to expand...
Click to collapse
oh right you dont have clockworkmod..
okay here's an idea. Download this then flash it in recovery like you would any ROM..
or this with fastboot
then follow the instructions I wrote before.
bortak said:
oh right you dont have clockworkmod..
okay here's an idea. Download this then flash it in recovery like you would any ROM..
or this with fastboot
then follow the instructions I wrote before.
Click to expand...
Click to collapse
Success I done the wipe all user data , used LeeDroid 2.5 final and everything has worked well.
Thanks again m8, I couldnt have done any off this without you Tutorial or help. Your a top man.
no prob. That's why I prefer using Clock in contrary to Amon RA - the formatting options, sometimes you just can't do without them (without using fastboot)

PLease help me :( (root-flashing)

Hi guys, I hope you can help me.
I have just rooted + flashed my motorola defy plus for the first time (on any device for that matter)
I installed 2nd init, version 0.6.... or something.
Put a rom, kernel and google apps on my sd-card
Then I turned usb-debugging off and rebooted my phone.
Now I can get into bootmenu, and this is what I do:
1) go to recovery
2) select custom recovery
3) then it says: Clockworkmod Recovery v2.5.1.8
E: Can't open /tmp/recovery.log
4) I then select wipe data/factory reset
5) then it says this: Formatting DATA
Formatting CACHE
FORMATTING SDEXT
No app2sd partition found. Skipping format of /sd-ext
Formatting SDCARD:/.android_secure
Data wipe complete
E: Can't open /tmp/recovery.log
6) After that i select install zip from sdcard
7) then I select choose zip from sdcard
8) then I select the zip file containing the rom
9) And it says: Finding update package
Opening update package
Installing update
E: Can't make /tmp/update_binary
Installation aborted
Now I can't go any further and can't use my phone at all
I hope u guys can help me, and that I haven't F*ed up my phone
what happen if you restart the phone ?
It goes right into bootmenu.
I have however found out how tog et my phone running normal again, I had to select Boot instead of Recovery and the choose Boot Normal.
I do however still want to flash CM9 onto my device but gonna ask here until i'm 100% sure it'll work.
So if you or any1 here got the links to the correct stuff I need, that would be very helpful
may be the sd card
try a different sd card it happen some times
when you restart the phone and you see the blue light, hit the VOL - button.
here choose boot option
select Set Default - and choose [2nd -Init]
restart the phone again.
one more question : what was the last ROM you flashed ?
This was the first time I flashed a ROM (or tried to)
I think the wrong one, can't post links just yet
Ok so I tried it again, and IT WORKED
Now theres a new problem: I get no reception, not for calling, and not for 3g connection.
Anybody knows how to fix this?
At the lockscreen it says Emergency calls only.
I have tried several basebans switchers, but none with any succes.
(I live in Belgium by the way)
vankja said:
Ok so I tried it again, and IT WORKED
Now theres a new problem: I get no reception, not for calling, and not for 3g connection.
Anybody knows how to fix this?
At the lockscreen it says Emergency calls only.
I have tried several basebans switchers, but none with any succes.
(I live in Belgium by the way)[/QUOTE
Do you have any APN's ?
Go to setting, wifi&networks, then check if you have and APN's in the access point names menu. If you dont you will have to look up an APN for your provider. I had this problem after flashing 2.2.1 sbf.
Click to expand...
Click to collapse
I tried to add one, but I can't probably because I dont have any service.
That is my main problem, I dont get service so I can't even make phonecalls and stuff
Use this :
http://forum.xda-developers.com/attachment.php?attachmentid=662294&d=1311330982
this is a base band switcher
go to recovery and install the zip
when u restar the phone your should see a baseband swhitcher program
now select the baseband in your country and restart the phone
and thats it !
I tried almost every baseband, still no luck
Can't I just go back to stock? My pc also doens't recognise my defy anymore, so I can't put anything on the SD-card
I didn,t solve the problem that you said in the first post here and in Q&A section, can you detail how you had solved?
Thanks.
cretu22 said:
I didn,t solve the problem that you said in the first post here and in Q&A section, can you detail how you had solved?
Thanks.
Click to expand...
Click to collapse
What I think did the trick was:
When I installed sndInit for the first time I chose to install the upper version (0,6...).
When I installed it for a second time I chose the version below that (1,....)
Hope this helps for you.
PS: I flashed another ROM and kernel, and now I have android 4 installed with signal/reception
Thanks for helping me guys!

[Q] Total block my wildfire s

Hello.
I have my wildfire that's practically 2 days ago that no
Continuous reboot of the white HTC screen.
All this because I moved some app on sd system
(link2sd, s-on, root, gold card,) having an urgent need for space,
seen that the partition was over 1gb ext. result:
almost 350 apps, many even expensive, its saved data, photos,
videos, notes etc.. all gone, with the joke that is not restarted.
I tried with bootloader, recovery, custom rom, hard reset etc.,
no nothing. What do I do? I throw it in for service since
will realize modding, or someone you know give me some advice?
Thank you for your attention.
Sorry for my English
try wiping dalkiv first, i think that's often problem that causes bootloops...
but if it's because you've lost some system apps, you might need to comoletely re-install system from scratch?
don't worry about your paid apps, once you get the system up and running again, you can re-load your google account and get them all back
Hello and thank you for attention.
The problem is that in recovery mode does not gives me the chance to wipe.
Not even hard reset works. I tried to install custom ROM without any results. I want to reinstall everything from scratch, is it possible?
thanks
as long as you can get to the recovery menu you should be ok.
when you press and hold volume down and power then choose recovery...what screen do you get to? is it a custom recovery like CWM (clockworkmod) or is it the stock htc recovery (which just shows some sort of caution logo i believe).
if you have only thehtc stock recovery, you need to get a PG76IMG.zip for custom recovery and put this on the root of your memory card, then restart the phone with volume down+power and it should start reading the PG76IMG.zip and install custom recovery.....
from here you'll have all the options you need to wipe everything etc...
once you have this up and running, what i tend to do if everything has gone wrong is to wipe EVERYTHING and start from scratch.
I go into mounts and storage and format everything, then coem out, choose wipe data/factory reset, then choose wipe cache, then advanced, wipe dalvik, wipe battery stats, fix permissions...
then turn off phone, choose factory reset from the bootloader menu, then bot into reovery again to install custom rom or stock rom.
hope this makes some sort of sense, this is all jsut off the top of my head mind.... :s
thanks now I try and let you know
I tried in bootloader mode with cwm recovery 5.0.2.8, and returns to the bootloader.
I installed the file pg761img. It reads CID incorrect.
Finally factory reset is accessible only in bootloader, because the device always crashes on htc white screen and when I do not restart the time.
What do you think?
if you are getting cid error, i think it means you need to make "goldcard" in order to use pg761img.zip to flash custom recovery
he should install the RUU it is stickied its gonna put your phone back to stock as if you just bought it from the store
Sent from my HTC_A510c using Tapatalk
kagevazquez said:
he should install the RUU it is stickied its gonna put your phone back to stock as if you just bought it from the store
Sent from my HTC_A510c using Tapatalk
Click to expand...
Click to collapse
^^^^^^this
may also still need to make goldcard though, I think I had to when I wanted to use RUU.
if you can't get around some RUU errors though, you can try using the rom.zip from the ruu, extract boot.img and system.img and use fastboot at command prompt to flash them?
no root
Help root permissions that are not forthcoming, now that a friend of mine put it back in place, I can not swirling.
I tried more than once with htc supertool v3 but no dice. I noticed, looking at the phone info
and the bootloader screen, some differences related to the rom and radio than before.
But I think the phone has the unlocked bootloader. Suggestions?
UNLOCKED
MARVEL PVT SHIP S-OFF RL
HBOOT-1.09.0099
MICROP-0451
RADIO-7.57.39.01M
Feb 8 2012,18:29:31
Versione Android
2.3.5
Versione HTC SENSE
2.1
Numero software
2.14.401.1
Versione Kernel
2.6.35.10-ga66971c
[email protected]#1
Tue Nov 8 07:08:05 CST 2011
Versione banda di base
47.23e.35.3038H_7.57.39.01M
Numero build
2.14.401.1 CL202358 release-key
try installing root.zip from cwm recovery
ok now I try. I would explain the process please? I am afraid to make a 'more trouble
just boot into cwm recovery (which i'm presuming you have installed already? if not, just use any of the tutorials, you're s-off so should have no problem insatlling custom recovery using tutorial).
put root.zip on your sd card
boot into recovery by holding volume down and press power, then scroll to "recovery" and press power to select.
once in custom recovery, select to install zip fom sd card, select to choose zip file and choose the root.zip
no need to wipe anything, just install then reboot system and confirm it's working by launching app "superuser" and attempt to update from within the app....if it updates it will say "that was cool, do it again?"....else it will say "update failed, retry".
GAPPS disappeared
Hi, I finally solved the problem, but I have created a 'more. I installed the cwm recovery, followed by recovery I installed the zip file root. Everything perfect, it is installed superuser and then I installed from market to link link2sd 8gb sd (6.40 gb fat32 - 64mb-1gb ext3 linux swap) some apps including GMail, MARKET, MAPS AND SEARCH. The problem is that they are gone after a cleanup of the cache and the data, I also tried to install some packages from the recovery GAPPS do not install them. Some help?
if your apps are missing maybe sounds like the ext partition is bot being mounted?
run link2sd and there is an option to "recreate mont scripts", be sure to choose the correct partition type that you have created e.g. ext2, ext3, or ext4?

[Q] Boot Hangup Error After Attemption Internal Memory Increase

Completed the following successfully on my Wildfire S 510c:
Unlocked
Installed CWM v5.0.2.6
Rooted
I wanted to find a way to either move the whole system to the SD card or to increase the Internal memory using the SD card.
I found a guide here explaining how to increase the internal memory using SD card, but after following the instructions to the T my phone hangs up on the white screen with HTC logo every time.
To make matters worse, the partitioned portion of the SD card cannot be seen in windows explorer when I try to access the SD via CWM, only the portion that was left over. I fear that since this problem occurred right after I installed cm-7-20120717-UNOFFICIAL-marvel recovery over the previous CWM I had and the Data2SDInstallerNXE2 I'm speculating 1 of 2 things have occurred: Either the Unofficial CWM is corrupted (All functions work properly inside recovery) or an error occurred where the system files were not properly copied into the newly created partition and so it tries to boot system from empty space.
I'm at a total loss where to go from here. I don't know of any free programs that can see all the partitions of the SD card where Windows cannot, let alone unpartition it, and even then how to set it back up to where it boots up where it needs to. I've tried to reinstall the previous CWM I had via zip installer but it give an "Installation Aborted".
Someone plz halp! lol
Ok, I found that under SD partition in CWM if you select different partition size it will remove the old partition, this still doesn't fix the hangup though.
Now it doesn't hang up, but keeps going back to bootloader screen. I think I should stop before it get worse and wait for a response. XD
Tried flashy method in an attempt to set phone back to locked and unrooted status. Only thing it did was set phone in relocked status. I'm taking a break for awhile, spent too many hours on this ><
LyleVertigo said:
Completed the following successfully on my Wildfire S 510c:
Unlocked
Installed CWM v5.0.2.6
Rooted
I wanted to find a way to either move the whole system to the SD card or to increase the Internal memory using the SD card.
I found a guide here explaining how to increase the internal memory using SD card, but after following the instructions to the T my phone hangs up on the white screen with HTC logo every time.
To make matters worse, the partitioned portion of the SD card cannot be seen in windows explorer when I try to access the SD via CWM, only the portion that was left over. I fear that since this problem occurred right after I installed cm-7-20120717-UNOFFICIAL-marvel recovery over the previous CWM I had and the Data2SDInstallerNXE2 I'm speculating 1 of 2 things have occurred: Either the Unofficial CWM is corrupted (All functions work properly inside recovery) or an error occurred where the system files were not properly copied into the newly created partition and so it tries to boot system from empty space.
I'm at a total loss where to go from here. I don't know of any free programs that can see all the partitions of the SD card where Windows cannot, let alone unpartition it, and even then how to set it back up to where it boots up where it needs to. I've tried to reinstall the previous CWM I had via zip installer but it give an "Installation Aborted".
Someone plz halp! lol
Ok, I found that under SD partition in CWM if you select different partition size it will remove the old partition, this still doesn't fix the hangup though.
Now it doesn't hang up, but keeps going back to bootloader screen. I think I should stop before it get worse and wait for a response. XD
Tried flashy method in an attempt to set phone back to locked and unrooted status. Only thing it did was set phone in relocked status. I'm taking a break for awhile, spent too many hours on this ><
Click to expand...
Click to collapse
Instead of the Data2sd provided in the tutorial, try using INT2EXTV2+(You can easily find it using the search function).....Do remember to flash it after the flashed rom has booted once
Also, you can not see the second partition of the SDCard on Windows...........Windows doesn't support it(EXT partitions)
csoulr666 said:
Instead of the Data2sd provided in the tutorial, try using INT2EXTV2+(You can easily find it using the search function).....Do remember to flash it after the flashed rom has booted once
Also, you can not see the second partition of the SDCard on Windows...........Windows doesn't support it(EXT partitions)
Click to expand...
Click to collapse
Ok, so as the current state of the phone, do I just wipe everything and then run CWM, reboot it then when it comes up again install Int2extv2+ from zip, that's it? Does the relock prevent me from taking the steps neccessary from getting back into the phone? and if so what would I need to do to unlock it again when I only have access to fastboot/bootloader/CWM?
LyleVertigo said:
Ok, so as the current state of the phone, do I just wipe everything and then run CWM, reboot it then when it comes up again install Int2extv2+ from zip, that's it? Does the relock prevent me from taking the steps neccessary from getting back into the phone? and if so what would I need to do to unlock it again when I only have access to fastboot/bootloader/CWM?
Click to expand...
Click to collapse
Unlock the Bootloader, get into CWM, wipe, flash the rom of your choosing, let it boot once, then go back to CWM and flash INT2EXTV2+
csoulr666 said:
Unlock the Bootloader, get into CWM, wipe, flash the rom of your choosing, let it boot once, then go back to CWM and flash INT2EXTV2+
Click to expand...
Click to collapse
Ok, so here is what I've done:
Re-unlocked √
Wipe date/Factory Reset √
Wipe Cache Partition √
Flashed cm-10.1-20130703-4.3-F-NIGHTLY-marvel √
Reboot System Now (Hangs on HTC white screen) - pulled battery out to turn off
Went back into bootloader -> CWM and installed INT2EXTV2+ via zip installer (selected no for SWAP2INT) √
Reboot - Hangs on HTC white screen. X
Here is a question, would S-ON affect this in any way? I've done the partial S-off procedure (which was recommended to me) but the bootloader still says S-On. If it needs to be completely off and shown as S-off would you show me a proper procedure link for me get that taken care of (but only if absolutely necessary)?
I really appreciate your help so far.
LyleVertigo said:
Ok, so here is what I've done:
Re-unlocked √
Wipe date/Factory Reset √
Wipe Cache Partition √
Flashed cm-10.1-20130703-4.3-F-NIGHTLY-marvel √
Reboot System Now (Hangs on HTC white screen) - pulled battery out to turn off
Went back into bootloader -> CWM and installed INT2EXTV2+ via zip installer (selected no for SWAP2INT) √
Reboot - Hangs on HTC white screen. X
Here is a question, would S-ON affect this in any way? I've done the partial S-off procedure (which was recommended to me) but the bootloader still says S-On. If it needs to be completely off and shown as S-off would you show me a proper procedure link for me get that taken care of (but only if absolutely necessary)?
I really appreciate your help so far.
Click to expand...
Click to collapse
Is there a chance you have a 2012 model of the WFS??? If so, see if the rom is compatible with the 2012 WFS.......some roms, like the OWL project(CM10.1) is compatible
csoulr666 said:
Is there a chance you have a 2012 model of the WFS??? If so, see if the rom is compatible with the 2012 WFS.......some roms, like the OWL project(CM10.1) is compatible
Click to expand...
Click to collapse
No go, Owl project roms are for GSM only. Mine does not have SIM card.
LyleVertigo said:
No go, Owl project roms are for GSM only. Mine does not have SIM card.
Click to expand...
Click to collapse
Why didn't you tell that before!! Look for roms with "marvelc" in them........ That's why it doesn't go past the HTC screen
csoulr666 said:
Why didn't you tell that before!! Look for roms with "marvelc" in them........ That's why it doesn't go past the HTC screen
Click to expand...
Click to collapse
The only one I was able to find that specifically called for CDMA that had a working dl link so far is cm-9.1.0-CRYPTOMILK-ALPHA9-marvelc.zip .
I tried to flash it but got this:
Installing update...
assert failed: getprop("ro.produ
ct.device") == "marvelc" || getp
rop("ro.build.product") == "marv
elc"
E:Error in /sdcard/cm-9.1.0-CRYP
TOMILK-ALPHA9-marvelc.zip
(Status 7)
Installation Aborted.
I did all the clearing and formatting required prior.
LyleVertigo said:
The only one I was able to find that specifically called for CDMA that had a working dl link so far is cm-9.1.0-CRYPTOMILK-ALPHA9-marvelc.zip .
I tried to flash it but got this:
Installing update...
assert failed: getprop("ro.produ
ct.device") == "marvelc" || getp
rop("ro.build.product") == "marv
elc"
E:Error in /sdcard/cm-9.1.0-CRYP
TOMILK-ALPHA9-marvelc.zip
(Status 7)
Installation Aborted.
I did all the clearing and formatting required prior.
Click to expand...
Click to collapse
Look for the ones with CDMA written in the thread, here are some CDMA roms I found
http://forum.xda-developers.com/showthread.php?t=2245617
http://forum.xda-developers.com/showthread.php?t=1861623
http://forum.xda-developers.com/showthread.php?t=2274173
Click to expand...
Click to collapse
csoulr666 said:
Look for the ones with CDMA written in the thread, here are some CDMA roms I found
Click to expand...
Click to collapse
I tried all those roms and same error, which leads me to believe that the rom isn't the problem.
However, all of that is irrelevant now, as I gave it to someone who said they knew how to fix it and they bricked it completely, so I just told him to keep it. lol
LyleVertigo said:
I tried all those roms and same error, which leads me to believe that the rom isn't the problem.
However, all of that is irrelevant now, as I gave it to someone who said they knew how to fix it and they bricked it completely, so I just told him to keep it. lol
Click to expand...
Click to collapse
U have marvelc no marvel mobile
Try with fastboot flash custom rom (boot.img,system.img, and recovery.img)
But dont forgot before factory reset.
U will have custom rom mobile, and worked mobile
If u can change rom, u must find marvelc roms, and first try cm7 rom
I too start with this rom (cm7)

Categories

Resources