Hello,
So I recently had my SGS3 rooted until I stupidly installed the OTA update that Att released. Everything was good, but now my phone was unrooted and I was unable to reroot using conventional rooting methods. Now, I figured that it would be good to install a custom ROM in order to re root my phone and put jelly bean on it. However, when I went into the Clockwork mod recovery, it gave me a status 7 error while trying to install the latest nightly build of CyanogenMod 10. I also cleared out all the caches and did a factory reset. Does anyone know what I might be doing wrong?
Thank you very much for your help!
wickbok said:
Hello,
So I recently had my SGS3 rooted until I stupidly installed the OTA update that Att released. Everything was good, but now my phone was unrooted and I was unable to reroot using conventional rooting methods. Now, I figured that it would be good to install a custom ROM in order to re root my phone and put jelly bean on it. However, when I went into the Clockwork mod recovery, it gave me a status 7 error while trying to install the latest nightly build of CyanogenMod 10. I also cleared out all the caches and did a factory reset. Does anyone know what I might be doing wrong?
Thank you very much for your help!
Click to expand...
Click to collapse
Download the file below file to your S3 and install it via Mobile Odin to get CWM back.
Well, from what I read, you aren't rooted anymore.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
wickbok said:
Hello,
So I recently had my SGS3 rooted until I stupidly installed the OTA update that Att released. Everything was good, but now my phone was unrooted and I was unable to reroot using conventional rooting methods. Now, I figured that it would be good to install a custom ROM in order to re root my phone and put jelly bean on it. However, when I went into the Clockwork mod recovery, it gave me a status 7 error while trying to install the latest nightly build of CyanogenMod 10. I also cleared out all the caches and did a factory reset. Does anyone know what I might be doing wrong?
Thank you very much for your help!
Click to expand...
Click to collapse
If I recall correctly, Status 7 means you have an older/not-supported version of CWM installed. Your best bet is going to be to download the Samsung Galaxy S3 QCom ToolKit, and use that to install the proper CWM version. Then you will be able to wipe/install a custom ROM.
Hi I just found out that we got an update. Now usually when a new update comes out I odin back to stock and then update and reinstall twrp then make a nandroid of my stock rom. Then I go back to my AOKP or whatever I am using which is usually something AOSP. In this way I have the new modem and I have a nandroid of the latest stock rom. But last time we got an update I ran ito the problem of the stock recovery rewriting itself. So I was able to use the the security hole to root the phone and then I was able put twrp on. Now this update is supposed to patch up that hole so how do we root? Use the tookit to stop it from rewriting? Or I guess I could just flash the new modem and forget about it. So does anyone know how to get it done?
Also does anyone know where to get a odin copy of the newest update?
I followed someone's instructions and installed ota rootkeeper from play store. Updated phone and kept it rooted
Sent from my SGH-T889 using xda app-developers app
CF-Auto root still works.
For those of you who keep getting stuck on the splash screen after trying to restart your phone after installing a 4.3 ROM.
My steps were (and I take no credit for this, I can't remember who had said to do this and I wasn't logged in so I couldn't click the thank you button):
*Note* If you were already on the Stock 4.3 ROM you do not want to flash the 4.0.4, 4.1.1 or 4.1.2 Stock ROM since you will brick your phone. The Stock ROM contains the Bootloader which should never be downgraded. Fyi: the Bootloader is not the Baseband, the Baseband is just what Modem you're using.
1. Use Odin to flash the latest stock ROM
2. Enter the stock recovery and do a factory reset and clear the cache (I did both twice just to make sure)
3. Use Odin to flash the stock rooted ROM.
4. Enter the stock recovery and do a factory reset and clear the cache. (This might not be necessary but I did anyways just to make sure)
5. Use Odin to flash a custom recovery (TWRP 2.6.0.0 was the newest recovery when I did this last week)
6. Enter the custom recovery and wipe everything, then flash whatever 4.3 based ROM and then flash GApps if you want.
*Note* It seemed like the phone was hanging on the splash screen after either the initial boot or the first restart (I can't remember which, it's been a week) but it did boot and reboot fine.
I hope this helps out some people since I found it to be quite irritating that I could install a 4.3 ROM and set everything up but when I went to restart it would hang at the splash screen (going into the recovery and clearing the cache/dalvik cache wasn't helping).
Are you basically saying to revert back to stock settings and redo the entire root process again?
Sent from my SGH-I747 using xda app-developers app
bullet2binary said:
Are you basically saying to revert back to stock settings and redo the entire root process again?
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yeah, from what I had read that seemed to be necessary since I had used Odin to update the bootloader (MF1 since my phone is the M variant) by itself when the newest Stock ROM had come out a while ago. I still flashed the newest Stock ROM (same MF1 bootloader for the M variant) but the first time I did it I forgot to enter the Stock Recovery to do a Factory Reset and Clear the Cache and ended up stuck on the splash screen of a 4.3 ROM after flashing a custom recovery. So I needed to reflash back to stock and start over.
Going into the Stock Recovery and doing a Factory Reset and Clearing Cache is necessary and doesn't take much time at all so you may as well do it just to be sure. I also recommend backing up your IMEI if you haven't done it yet.
spongdangly said:
Yeah, from what I had read that seemed to be necessary since I had used Odin to update the bootloader (MF1 since my phone is the M variant) by itself when the newest Stock ROM had come out a while ago. I still flashed the newest Stock ROM (same MF1 bootloader for the M variant) but the first time I did it I forgot to enter the Stock Recovery to do a Factory Reset and Clear the Cache and ended up stuck on the splash screen of a 4.3 ROM after flashing a custom recovery. So I needed to reflash back to stock and start over.
Going into the Stock Recovery and doing a Factory Reset and Clearing Cache is necessary and doesn't take much time at all so you may as well do it just to be sure. I also recommend backing up your IMEI if you haven't done it yet.
Click to expand...
Click to collapse
This seems to have done the job. Running PAC 4.3 right now. I've rebooted successfully once so far.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Exactly what I ended up doing after nothing else was working. After getting it hanging the first time, even flashing 4.2 roms was giving me boot issues. After reverting back to stock and reflashing I'm now running the 9/1 Pac nightly and the 8/31 kt747 kernel.
I'm probably 10+ reboots in without issue and I flashed the kernel separately!
bullet2binary said:
This seems to have done the job. Running PAC 4.3 right now. I've rebooted successfully once so far.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
exodus454 said:
Exactly what I ended up doing after nothing else was working. After getting it hanging the first time, even flashing 4.2 roms was giving me boot issues. After reverting back to stock and reflashing I'm now running the 9/1 Pac nightly and the 8/31 kt747 kernel.
I'm probably 10+ reboots in without issue and I flashed the kernel separately!
Click to expand...
Click to collapse
I'm glad to hear that this seems to be the proper fix. That's odd that you were having trouble with 4.2 ROMs, but then again I'd been running 4.2 ROMs on my phone since they first started rolling out. It's kind of annoying that everyone's S3 seems to be slightly different then the next.
Yeah this was a weird one all right. Just glad this post had a solution
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
glad i found this otherwise my first noob post would have truly been a noob move. Thanks wouldn't have guessed that fix for a few days at least.
verified it works. but it did require some weird time dealing with a bootloop issue on stock recoveries. had to find a .tar version of CWM to flash via odin for the final result.
Still Stuck at Splash Screen after trying to upgrade to 4.3
Background:
I had been running task's rom since 4.1.x. Upgraded to 4.2 with not problems and I kept the rom current. Tried to upgrade to 4.3 and that is where the problems started. It appeared to work, saw that Google was updating a number of apps but then then I kept getting error messages regarding various about various processes stopping unexpectedly. Rebooted the phone and it came up with Task's kernel splash screen where it remains frozen.
I can get into TWRP (v2.3.3.1) recovery and into Download mode.
I have tried wiping Cache and Dalvik Cache
I have wiped System
I have done a Factory Reset
I have Formatted Data
I have used Odin twice to get back to stock (I747UCDLK3) and both times it says "passed."
When I try to reboot it, however, it comes back to Task's Kernel splash screen (I do not see the Samsung screen)
Any help or suggestions would be great.
UPDATED: Found an older update from April and was able to restore it. Still wondering why 4.3 wouldn't take.
This Works
I was skeptical, but this actually works! Now running Task's 4.3 on my bell i747m without any problems!
Thanks for the tip OP :good:
spongdangly said:
For those of you who keep getting stuck on the splash screen after trying to restart your phone after installing a 4.3 ROM.
My steps were (and I take no credit for this, I can't remember who had said to do this and I wasn't logged in so I couldn't click the thank you button):
1. Use Odin to flash the latest stock ROM
2. Enter the stock recovery and do a factory reset and clear the cache (I did both twice just to make sure)
3. Use Odin to flash the stock rooted ROM.
4. Enter the stock recovery and do a factory reset and clear the cache. (This might not be necessary but I did anyways just to make sure)
5. Use Odin to flash a custom recovery (TWRP 2.6.0.0 was the newest recovery when I did this last week)
6. Enter the custom recovery and wipe everything, then flash whatever 4.3 based ROM and then flash GApps if you want.
*Note* It seemed like the phone was hanging on the splash screen after either the initial boot or the first restart (I can't remember which, it's been a week) but it did boot and reboot fine.
I hope this helps out some people since I found it to be quite irritating that I could install a 4.3 ROM and set everything up but when I went to restart it would hang at the splash screen (going into the recovery and clearing the cache/dalvik cache wasn't helping).
I hope I posted this in the right section but apologies if it's not.
Click to expand...
Click to collapse
If this works you're a life saver! I've been posting around 4.3 threads about this for weeks and no one came up with a decent answer....
Tried reflashing stock with root but didn't work... i'll try your way, see if that works
Gonna try this tonight!!!
Thanks!
I posted in the CM thread about this, but thought I would pass it along.. I didn't have to go back to stock non-rooted. What I did:
I odin'd Mr. Robinson's LK3 rooted
Factory reset from the 3e recovery
Rebooted
Odin'd twrp
Restored nandroid of CM
Good to go.
Solved
Thanks, also works for i727 skyrocket
wont this brick people phones flashing back 4.1.1 stock ? im on stock 4.3 stuck on samsung galaxy s3 logo meaning flashing back to latest stock rom using odin 4.1.2? 4.3 stock rom or 4.3 custom roms?
Kastro1784 said:
wont this brick people phones flashing back 4.1.1 stock ? im on stock 4.3 stuck on samsung galaxy s3 logo meaning flashing back to latest stock rom using odin 4.1.2? 4.3 stock rom or 4.3 custom roms?
Click to expand...
Click to collapse
spongdangly said:
1. Use Odin to flash the latest stock ROM
Click to expand...
Click to collapse
If you were already on the Stock 4.3 ROM you do not want to flash the 4.0.4, 4.1.1 or 4.1.2 Stock ROM since you will brick your phone.
I'll add a note to the OP about not attempting to downgrade to an older Stock ROM though.
spongdangly said:
If you were already on the Stock 4.3 ROM you do not want to flash the 4.0.4, 4.1.1 or 4.1.2 Stock ROM since you will brick your phone.
I'll add a note to the OP about not attempting to downgrade to an older Stock ROM though.
Click to expand...
Click to collapse
what framware did you flash to get 4.3 back working ? a leaked 4.3 Rom with no root ? thien reflash the stock 4.3 ?
Kastro1784 said:
what framware did you flash to get 4.3 back working ? a leaked 4.3 Rom with no root ? thien reflash the stock 4.3 ?
Click to expand...
Click to collapse
When I had done this back in August, I flashed the Rogers 4.1.2 Stock ROM since that was the latest stock firmware at the time and I have a Canadian S3.
If you had already flashed or been on the Stock AT&T 4.3 ROM, I'd recommend reflashing the latest Stock AT&T 4.3 ROM and following the instructions in the OP. Just make sure that you don't attempt to flash an older version of the Stock ROM that you were already on since you will brick your phone. The Stock ROM contains the bootloader and that cannot be downgraded. I don't have an American S3 since I'm Canadian so I don't know which 4.3 bootloader is the newest although I'm sure a quick search would answer that for you.
spongdangly said:
When I had done this back in August, I flashed the Rogers 4.1.2 Stock ROM since that was the latest stock firmware at the time and I have a Canadian S3.
If you had already flashed or been on the Stock AT&T 4.3 ROM, I'd recommend reflashing the latest Stock AT&T 4.3 ROM and following the instructions in the OP. Just make sure that you don't attempt to flash an older version of the Stock ROM that you were already on since you will brick your phone. The Stock ROM contains the bootloader and that cannot be downgraded. I don't have an American S3 since I'm Canadian so I don't know which 4.3 bootloader is the newest although I'm sure a quick search would answer that for you.
Click to expand...
Click to collapse
There is no latest Stock AT&T 4.3 ROM right now to reflash if you're already on the Stock AT&T 4.3 ROM. We cannot keep telling people this. If so, tell us how, because no one has, as of yet.
I've seen entirely too many posts telling people who are having trouble or phone is soft bricked on the Stock AT&T 4.3 ROM to flash or Odin back to stock. Then when asked how, the discussion ends.
That's also one of the reasons why I refuse to upgrade to 4.3 right now. At least I can still Odin back to stock as an option if something does goes wrong, but who am I to tell anyone to stay away from the latest toy, I mean update?
shortydoggg said:
There is no latest Stock AT&T 4.3 ROM right now to reflash if you're already on the Stock AT&T 4.3 ROM. We cannot keep telling people this. If so, tell us how, because no one has, as of yet.
I've seen entirely too many posts telling people who are having trouble or phone is soft bricked on the Stock AT&T 4.3 ROM to flash or Odin back to stock. Then when asked how, the discussion ends.
That's also one of the reasons why I refuse to upgrade to 4.3 right now. At least I can still Odin back to stock as an option if something does goes wrong, but who am I to tell anyone to stay away from the latest toy, I mean update?
Click to expand...
Click to collapse
I'm sorry that I'm unable to help. As I had mentioned I have a Canadian Rogers phone (since I'm in Canada) so I don't know what's going on with the AT&T Stock 4.3 ROMs other then the fact that lots of people are having problems.
If you never flashed or did an OTA update to 4.3 then I'd suggest flashing the Stock 4.1.2 ROM. That or try what Ozark_8125 did since it saves you a couple steps (just make sure that LK3 isn't an older ROM than the one you were on).
If you're unsure what bootloader is currently on your phone and your phone is rooted I'd highly recommend downloading one of the many Root Check apps from the Play Store to verify which bootloader you're currently on.
*Note* I don't know which bootloader is for the 4.1.2 AT&T ROM nor do I know which bootloader came with the 4.3 ROMs. I'm sure a simple search would answer that for you.
Ozark_8125 said:
I posted in the CM thread about this, but thought I would pass it along.. I didn't have to go back to stock non-rooted. What I did:
I odin'd Mr. Robinson's LK3 rooted
Factory reset from the 3e recovery
Rebooted
Odin'd twrp
Restored nandroid of CM
Good to go.
Click to expand...
Click to collapse
Samsung fixed my phone free thanks for the help
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Hi everyone I hope this is not a repetition of some old thread (I tried but couldn't find though).
I was using my note 2 (T889) on stock 4.3 which i previously flashed via odine. A couple of days ago i came by this good looking kitkat based rom ( eZKAT v2.0 ) and went on to try it. the rom flashed flawlessly and after flashing my modem i got the signals as well but the wifi was not working. tried using dr. ketans wifi patch but didnt get the wifi to working. Anyhow, I decided to go back to 4.3 via odine. The odine flashing completed successfully but i got stuck on T-mobiles boot screen for hours.
Is there anything called "you cant go back to 4.3 from 4.4.2"? If yes, then whats the way around? I really need to go back to the stock.
Thanks.
zetrixNoob said:
Hi everyone I hope this is not a repetition of some old thread (I tried but couldn't find though).
I was using my note 2 (T889) on stock 4.3 which i previously flashed via odine. A couple of days ago i came by this good looking kitkat based rom ( eZKAT v2.0 ) and went on to try it. the rom flashed flawlessly and after flashing my modem i got the signals as well but the wifi was not working. tried using dr. ketans wifi patch but didnt get the wifi to working. Anyhow, I decided to go back to 4.3 via odine. The odine flashing completed successfully but i got stuck on T-mobiles boot screen for hours.
Is there anything called "you cant go back to 4.3 from 4.4.2"? If yes, then whats the way around? I really need to go back to the stock.
Thanks.
Click to expand...
Click to collapse
I had this problem on my Note also. Downgrading versions of Android requires a data wipe. You will need to reflash your 4.4 ROM then backup your data if you want. Save your backup to your computer then install the 4.3 image.
Sent from my Nexus 7
EverDawn4 said:
I had this problem on my Note also. Downgrading versions of Android requires a data wipe. You will need to reflash your 4.4 ROM then backup your data if you want. Save your backup to your computer then install the 4.3 image.
Sent from my Nexus 7
Click to expand...
Click to collapse
I already tried that but still the booting stuck on the t-mobile logo. I read somewhere that locked bootloader don't let you downgrade to previous version. Is this true?
In that case. Try finding a 4.3 rom that's close to stock.
Sent from my Nexus 7
The locked bootloader is always in stock firmwares i.e 4.3 for the Note 2 but not in custom roms meaning u can even install Lollipop custom on it & downgrade smoothly, i have done that many times. The problem is 4.3 stock firmware has locked bootloader hence downgrading still keeps u in 4.3 bootloader even if u remove all the KNOX files.
Stuck trying to downgrade from custom 5.1.1 to stock 4.3
Hi, i have a problem like this, upgrade to a custom 5.1.1 and then sell the phone, the new owner wants to have it stock, i try to downgrade to 4.3 but i cant, in odin i set the phone to flash it but seems like it doesn`t recognize the phone and i dont know why, so, i decided to try in recovery mode installing from the sd card but the sistem abort, so, i don`t know what to do, i`ll appreciates any help, sorry for my english, i do my best. (i have root access before upgrated to 5.1.1).
I had CM12 installed with root, But i took it off and installed a stock 4.1 ATT firmware so i could update it normally again, And i took root off through super su. But every time i try to update it, The 700mb file downloads and goes to install with stock recovery (i reinstalled that back on there because i though TWRP was messing with it) and when it gets to around 25-31% area, It fails and when my phone restarts, it says failed to update. Does anybody know how to fix this? Thanks in advance
What is your end goal here, completely stock? If so check this out http://forum.xda-developers.com/showthread.php?t=2261153
Tutorial: How to use KIES Emergency Firmware Recovery (EFR) ....
Or get your stock firmware from sammobile.com and odin it into your phone. Done properly ypur phone will be completely stock again. <--just did this the other day with my phone and worked flawlessly. I did back up all pics and such to pc first just in case. Stock everything was flashed.
Not sure about data loss or flash counter trips. I've been out of the game for awhile.
Sent from my SGH-I317M using XDA Free mobile app