Related
Hi all, I have a dinc2 and it was dropped in water. It was removed very fast and put In rice. Thought I saved it but it started wigging and only goes to htc screen. I am able to volume down w/ power and get to hboot menu but that's about it. I plug in to comp and it doesn't recognize it. I have the htc sync on my comp. But nothing. Don't have ins. So I would like to get it running. Any and all help appreciated. Thanks, hp
Sent from my DROID X2 using XDA App
Unfortunately there is not much else you can do for water. Maybe let it sit on a window seal in the sun with the back off. Just to try to get any remaining water out. More than likely it will not come back.
Are the water marks turned pink?
Sent from my ADR6350 using xda premium
homephysician said:
Hi all, I have a dinc2 and it was dropped in water. It was removed very fast and put In rice. Thought I saved it but it started wigging and only goes to htc screen. I am able to volume down w/ power and get to hboot menu but that's about it. I plug in to comp and it doesn't recognize it. I have the htc sync on my comp. But nothing. Don't have ins. So I would like to get it running. Any and all help appreciated. Thanks, hp
Sent from my DROID X2 using XDA App
Click to expand...
Click to collapse
Give it a week...happened to my inc1 and after a week it all worked perfectly.
Sent from my ADR6350 using xda premium
homephysician said:
Hi all, I have a dinc2 and it was dropped in water. It was removed very fast and put In rice. Thought I saved it but it started wigging and only goes to htc screen. I am able to volume down w/ power and get to hboot menu but that's about it. I plug in to comp and it doesn't recognize it. I have the htc sync on my comp. But nothing. Don't have ins. So I would like to get it running. Any and all help appreciated. Thanks, hp
Sent from my DROID X2 using XDA App
Click to expand...
Click to collapse
What happens when you get in recovery? Something like a failure to mount certain partitions?
Sent from my ADR6350 using xda premium
I have also had a similar experience with my Eris. I left it on a radiator with the back off and battery/ SD card removed for 24hrs and it came up fine even though my water markers were all triggered. Still works today.
Good luck!
Hi thanks for the replies. The water marks are not pink. When at the recovery window the recovery goes to the htc white screen. The crc calculates. Its been more than a week. The only reason I thought there might be some hope is because it does go to the recovery window. I also notice small pin holes in the back cover. Maybe a master reset or some hope. Thanks again for the help. hp
Sent from my DROID X2 using XDA App
if the water marks are not turned you can file a warranty claim but that is risky due to not knowing what is inside the phone. The outter marks are harder to turn than inner water marks.
Try just letting it dry out like myself and others have said. You do not want to screw things up more messing with it vs letting it work its self out.
Sent from my ADR6350 using xda premium
Thanks man. I don't have insurance on it. But I do appreciate all the responses.
Sent from my DROID X2 using XDA App
homephysician said:
Thanks man. I don't have insurance on it. But I do appreciate all the responses.
Sent from my DROID X2 using XDA App
Click to expand...
Click to collapse
Well if the water marks aren't pink...go to Verizon, play dumb and say it won't turn on?
Sent from my ADR6350 using xda premium
thanks but...., i and now you all know it has water damage. for me to go in to verizon and play dumb would be deceitful. the phone is expensive but not worth lying about. i have to face an all mighty God some day, and possibly sooner than later. its just not worth the risk to me. but i do thank you all for the suggestions. be blessed and happy new year to all. hp
Not sure if it's been a week, but there could still be water in it. I dropped my old iPhone in the toilet, and by the time got it out, the screen was flickering and it was resting randomly. I took it entirely apart and found lots of spots where water reached. Dried them all out, and it still works fine to this day.
At this point, you have nothing to loose, so I'd sit down at a clean table with some small screwdrivers and start tearing it down. I'm sure there are diagrams on the web showing how it comes apart. In addition to water, because of the time that has elapsed, look for spots of corrosion - light green to white dust or flakes. If you see any, you can try brushing it away with a small paintbrush. If the water has all dried up and it's still not working, there has to be a short (or several) somewhere. You might get lucky, and like I said, you have nothing to loose.
Your honesty is much appreciated! Fraudulent warranty claims affect all of us.
If you still haven't gotten it working I recommend a bath in rubbing alcohol for about 30-40 seconds. The higher the alcohol percentage the better, I prefer the 90% stuff. Then another overnight sit in rice. Do both of these with the back cover and battery both removed.
I know it sounds a bit strange to put it in liquid but the alcohol will dilute the water and make it evaporate much faster. The rice will further accelerate this process. I have done it before with great results and at this point you can't do much more harm to it if it isn't even turning on.
Best of luck!
Sent from my Incredible 2 HD using XDA App
cstone1991 said:
Your honesty is much appreciated! Fraudulent warranty claims affect all of us.
If you still haven't gotten it working I recommend a bath in rubbing alcohol for about 30-40 seconds. The higher the alcohol percentage the better, I prefer the 90% stuff. Then another overnight sit in rice. Do both of these with the back cover and battery both removed.
I know it sounds a bit strange to put it in liquid but the alcohol will dilute the water and make it evaporate much faster. The rice will further accelerate this process. I have done it before with great results and at this point you can't do much more harm to it if it isn't even turning on.
Best of luck!
Sent from my Incredible 2 HD using XDA App
Click to expand...
Click to collapse
Take your battery out if you do this.. just sayin...
Sent from my Mikrunny'd Vivo_w
faehsemc said:
Take your battery out if you do this.. just sayin...
Sent from my Mikrunny'd Vivo_w
Click to expand...
Click to collapse
VERY IMPORTANT! I probably should have put that in caps in my post. It was in there though.
Sent from my Incredible 2 HD using XDA App
My friend spilled milk all over her phone, and it wouldn't turn on. I told her to put it in alcohol, and a month later it still works, if a little funny sometimes. But yes, it is important to remove the battery, and the sd card. And let it sit for a while afterwards.
cstone1991 said:
VERY IMPORTANT! I probably should have put that in caps in my post. It was in there though.
Sent from my Incredible 2 HD using XDA App
Click to expand...
Click to collapse
Do you know what alcohol does to the LCD screen...
It left a permanent color band pattern on my 6800.
If you are going to put alcohol any where near it I would do it with a Q-Tip with the covers removed.
Find an old tire compressor, the 12V type and modify the intake of the compressor to connect a suction tube to it.
Swab the area around the components with a soggy Q-Tip (avoid running any on the LCD screen) and work it in with an old tooth brush (make sure the toothbrush is very clean, you don't want to smear any fluoride residue on the solder mask of the circuit board).
Then power up the pump and suck up the excess residue.
Wen prepping the unit, you may want to open all of those ribbon cable clamps.
That's the first place corrosion wants to grow.
Just be sure to handle those cables with care.
The copper traces within them is very thin.
If there is any corrosion on the contacts of the cables, lightly use a pencil eraser on them by holding it flat on a surface add rubbing in one direction away from the main part out to the end.
Good luck...
cac2us said:
Do you know what alcohol does to the LCD screen...
It left a permanent color band pattern on my 6800.
If you are going to put alcohol any where near it I would do it with a Q-Tip with the covers removed.
Find an old tire compressor, the 12V type and modify the intake of the compressor to connect a suction tube to it.
Swab the area around the components with a soggy Q-Tip (avoid running any on the LCD screen) and work it in with an old tooth brush (make sure the toothbrush is very clean, you don't want to smear any fluoride residue on the solder mask of the circuit board).
Then power up the pump and suck up the excess residue.
Wen prepping the unit, you may want to open all of those ribbon cable clamps.
That's the first place corrosion wants to grow.
Just be sure to handle those cables with care.
The copper traces within them is very thin.
If there is any corrosion on the contacts of the cables, lightly use a pencil eraser on them by holding it flat on a surface add rubbing in one direction away from the main part out to the end.
Good luck...
Click to expand...
Click to collapse
Hmm... I never thought about that but I can definitely see how damage to the screen is possible. I have never seen it happen to phones that I or anyone I know have tried it on but I have never tried it on a touchscreen phone, which could definitely be different.
Thank you for posting a much safer method!
Sent from my Incredible 2 HD using XDA App
I know there are forums out there that talks about painting the Nexus Housing, but I want instructions that shows that the paint won't rub off, chip, and crack.
Have anyone found instructions that has flawless results that last if done right???
Doubt you'll find such a guarantee as nothing lasts for ever.....
SysAdmNj said:
Doubt you'll find such a guarantee as nothing lasts for ever.....
Click to expand...
Click to collapse
True. But I didn't say forever. I said that last.
And by last I mean at least a year. Ice only dropped the phone once between my 7 months. So I'm pretty confident I won't drop it again.
Dragn4rce said:
I know there are forums out there that talks about painting the Nexus Housing, but I want instructions that shows that the paint won't rub off, chip, and crack.
Have anyone found instructions that has flawless results that last if done right???
Click to expand...
Click to collapse
Mask properly.
Sand liberally, but not abusively.
Primer optional.
Paint lightly to prevent running.
Multiple layers. Let set in between.
Allow plenty of time to dry.
Use a dust free environment. I recommend rigging a couple CPU fans near it pointing away.
Sent from my Galaxy Nexus using xda premium
Jubomime said:
Mask properly.
Sand liberally, but not abusively.
Primer optional.
Paint lightly to prevent running.
Multiple layers. Let set in between.
Allow plenty of time to dry.
Use a dust free environment. I recommend rigging a couple CPU fans near it pointing away.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
You forgot the oven bake drying or somethin...
Jubomime said:
Mask properly.
Sand liberally, but not abusively.
Primer optional.
Paint lightly to prevent running.
Multiple layers. Let set in between.
Allow plenty of time to dry.
Use a dust free environment. I recommend rigging a couple CPU fans near it pointing away.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
What brand of paint so you recommend for this job???
Don't say of my choosing. I want ur opinion of what would do well for this kind of use.
SysAdmNj said:
You forgot the oven bake drying or somethin...
Click to expand...
Click to collapse
That step is that between which one???
You can also use a paint that has the primer built in but again it is optional. Its not like your painting an orange wall white . Anyways I did I used rustoleum also the key is to LET IT DRY between applications. And do not do multiple applications because it will take forever to dry and u do not have forever as u need ur phone. Beside u only need 4 to 5 light coats. Distribute evenly good luck
sarni84 said:
You can also use a paint that has the primer built in but again it is optional. Its not like your painting an orange wall white . Anyways I did I used rustoleum also the key is to LET IT DRY between applications. And do not do multiple applications because it will take forever to dry and u do not have forever as u need ur phone. Beside u only need 4 to 5 light coats. Distribute evenly good luck
Click to expand...
Click to collapse
Thanks.
So you've painted ur phone??? How is it holding up??? And how long have it been???
My dad keeps saying I'm gonna fu×k up and that it will chip no matter what and I'm like, "challenge accepted.:sly:"
A chip is a chip.. but how bad it looks after the chip will depend on how thick the paint is. Considering the material you're painting, I would go with a paint specific for plastics. Try a hobby store that has a good model car section.
Sent from my Galaxy Nexus using xda premium
But to be perfectly honest, if you're asking us for painting advice then you probably aren't pro. That means there's a good chance your dad is right. My advice is don't do it. But if you do, mask the **** out of it.
Sent from my Galaxy Nexus using xda premium
Don't listen to him (your dad) and so far no chips and everything looks good its been about 3 weeks also. Anyways be careful when taking volume and power rockers off they are easy tho and for the gold pogo pins there is a black bar that goes over them work on each end and pry the bar up it will have a hole on each end. Then when the black bar is off u will see three individual pogo pins u have to stick something against them from outside (like pushing them inward) then they will fallout out. Tape off everything that is important. And remember this will prolly void your warranty so u should grab an extra grey housing and battery cover (if u decide to paint that). I personally am getting the white housing and white battery door I get bored quick
Jubomime said:
A chip is a chip.. but how bad it looks after the chip will depend on how thick the paint is. Considering the material you're painting, I would go with a paint specific for plastics. Try a hobby store that has a good model car section.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Alright. Thanks for that.
I have a dumb question, how come the paint doesn't chip of a car easily if you paint a fiber glass part.
My dad has a bumper and it came white and got it painted black and not a single chip.
sarni84 said:
Don't listen to him (your dad) and so far no chips and everything looks good its been about 3 weeks also. Anyways be careful when taking volume and power rockers off they are easy tho and for the gold pogo pins there is a black bar that goes over them work on each end and pry the bar up it will have a hole on each end. Then when the black bar is off u will see three individual pogo pins u have to stick something against them from outside (like pushing them inward) then they will fallout out. Tape off everything that is important. And remember this will prolly void your warranty so u should grab an extra grey housing and battery cover (if u decide to paint that). I personally am getting the white housing and white battery door I get bored quick
Click to expand...
Click to collapse
Yeah I'm gonna buy a new one before doing this and use the old one as my test since it has dings and scratches on it.
sarni84 said:
I personally am getting the white housing and white battery door I get bored quick
Click to expand...
Click to collapse
I have the Verizon i515 version.
The only thing available is the white door.
Damn those sellers!!!!! Selling stuff half way.
Vinyl dye bonds directly to plastic, dries in minutes, and won't chip or scratch away. Just 2-3 light coats is all you need for good coverage. The only limitation is that you don't have much choice in the color or finishes.
earlyberd said:
Vinyl dye bonds directly to plastic, dries in minutes, and won't chip or scratch away. Just 2-3 light coats is all you need for good coverage. The only limitation is that you don't have much choice in the color or finishes.
Click to expand...
Click to collapse
Love that word. Bond.
Jubomime said:
But to be perfectly honest, if you're asking us for painting advice then you probably aren't pro. That means there's a good chance your dad is right. My advice is don't do it. But if you do, mask the **** out of it.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I know how to paint.
Just don't know what to do with a housing that gonna be rubbed against my skin and pants.
Dragn4rce said:
Love that word. Bond.
Click to expand...
Click to collapse
It's a good word for what vinyl dye does. I've been using it for years when painting game controllers and have never had it wear off.
my phone started entering car mode randomly the past two days i have deleted the app very long time ago i did a fresh install with no change, i do work at an iron pipe making factory so my guess is tiny iron powder particles in the usb port. any one can help thx
I've been having similar problems with the s2 and it seems common here. They advise to give the USB port a good clean with some alcohol and if it still gives problems it will most probably need a new port.
Sent from my GT-I9100 using xda premium
but the usb port is so small do i need to use only a tooth peak or what?
Yes, compressed air works a treat too, I think you can buy small tins of it from stationary shops, they use it to clean keyboards etc........... in fact don't you have any compressed air systems at your work?
Give it a quick blast if you do to get the dust out, if that doesn't work its most likely broken, replacements are cheap off eBay if you fit it yourself but if you take it to a shop they may charge a lot more up to £50 at some of the rip off shops round my way. If that's the case you may as well save the cash to put towards an upgrade unless you can get it done real cheap.
Sent from my GT-I9100 using xda premium
i can use compressd air but my only concern is to not blow the particles too dip in, and one other thing any suggestion on cleaning both speakers they got stuff in to them a swell, only thing is to not take the phone apart ;]
darkstep said:
i can use compressd air but my only concern is to not blow the particles too dip in, and one other thing any suggestion on cleaning both speakers they got stuff in to them a swell, only thing is to not take the phone apart ;]
Click to expand...
Click to collapse
Strong magnet for built up metal dust removal. Beware though when using for loud speaker as speakers are magnetic and if done for excessive amount of time may damage the speaker.
Cotton buds
Damp rolled up tissue/toilet roll (rolled between fingers )
Forum fishing.... Who's biting!
the phone also got the loudspeker call bug (usb short fo shure), today i used a magnet and vacum cleaner to clean it there were alote of iron particles in there and now it seems to work fine thx to both of u ;]
edit: started doing it again ;[ will send it for rep i gues
I'm on vacation and was taking pictures of the kids by the pool when I fumbled it and it dropped into the water!!!!! :crying: I quickly jumped in and grabbed it (it was probably only 10 seconds). I took the backing off, pulled the battery, and since my towel was right there, dried it as best I could. I ran back to the cabin, but had no rice. The kids ran to other cabins, found rice, and I had it in a bowl within 5 or 7 minutes.
What else can I do? Do I need to unscrew everything and clean the board with a toothbrush or q-tip with rubbing alcohol? I don't have insurance on it and CANNOT afford a new one! Not to mention ALL my pictures are on there! Please help! I'm completely panicked and in tears.
Thanks in advance,
Keri
Don't freak you did good... I would take it apart and just set it in the rice overnight... the rice should pull every bit of that moisture out and depending on if the water fried the board or not it should boot right up in the morning....
In the future download drop box, all your pictures are backed up as soon as you shoot them.
Sent from my SPH-D700 using xda premium
Do I need to undo all the screws or just pull the battery and submerge the battery and main unit in the rice?
I've been meaning to use dropbox, too. I just hadn't gotten around to it (shame on me, I know).
Thanks so much,
Keri
kbjcooke said:
Do I need to undo all the screws or just pull the battery and submerge the battery and main unit in the rice?
I've been meaning to use dropbox, too. I just hadn't gotten around to it (shame on me, I know).
Thanks so much,
Keri
Click to expand...
Click to collapse
It would probably be better if you remove the screws... but maybe not completely neccessary either.. but since you don't have insurance, you don't need to worry about voiding that, so I would remove them and leave it in rice... one of my friends got super drunk and left his phone out for 7 hours in some puring rain, left in rice with it taken apart for 24 hours and hasn't had a single problem... (his phone was off though, so that probably made a difference....)
I removed the six main screws, but can't figure out how to separate the backing from the front face. I'm not sure if there are more screws, but my tools are extremely limited (only have a mini screwdriver set).
kbjcooke said:
I removed the six main screws, but can't figure out how to separate the backing from the front face. I'm not sure if there are more screws, but my tools are extremely limited (only have a mini screwdriver set).
Click to expand...
Click to collapse
Check youtube for how to take the epic 4g apart (make sure its not the epic touch). Its there and will give you a step by step...
Edit- video here http://www.youtube.com/watch?v=g6npRaFm0d4&feature=youtube_gdata_player
Btw there are 7 screws... your missing one... don't go any further on that video than just taking the casing off... don't remove any wires unless you are comfortable putting them back together... don't lose the buttons!!! And a butter knife works pretty well for prying the casings apart... just be GENTLE! After you get the casing apart, stick it in the rice, put it back together in 24 hours or so and let us know how it goes....
Awesome...just realized I'm in the Epic 4G forums, not in the Epic 4G TOUCH forums. Should I post this there, or will someone be able to move it for me?
Sorry about that...(and I'll look on YouTube for instructions on how to dissassemble the touch).
It's just not my day...
Keri
kbjcooke said:
Awesome...just realized I'm in the Epic 4G forums, not in the Epic 4G TOUCH forums. Should I post this there, or will someone be able to move it for me?
Sorry about that...(and I'll look on YouTube for instructions on how to dissassemble the touch).
It's just not my day...
Keri
Click to expand...
Click to collapse
Lol.... wow talk about things not going right... I will get the video for the touch for you... give me a minute...
Edit- here ya go http://www.youtube.com/watch?v=65pvAINg2ME&feature=youtube_gdata_player again stop once you pry the pieces apart and put it in the rice... good luck...
flastnoles11 said:
Lol.... wow talk about things not going right... I will get the video for the touch for you... give me a minute...
Edit- here ya go http://www.youtube.com/watch?v=65pvAINg2ME&feature=youtube_gdata_player again stop once you pry the pieces apart and put it in the rice... good luck...
Click to expand...
Click to collapse
Thank you so much!!!
kbjcooke said:
Thank you so much!!!
Click to expand...
Click to collapse
Not a problem, hope it all works out! You should come back here and update tomorrow after you try and turn it back on.... good luck!!!
flastnoles11 said:
Not a problem, hope it all works out! You should come back here and update tomorrow after you try and turn it back on.... good luck!!!
Click to expand...
Click to collapse
I definitely will. One last question: The rice residue won't ruin the board will it?
kbjcooke said:
I definitely will. One last question: The rice residue won't ruin the board will it?
Click to expand...
Click to collapse
Out of everybody that I have heard of doing this to restore their deevice after dropping it in water has never had the rice ruin the board... I guess it could be possible though so just pay attention to it...
Questions go in Q&A
Thread moved
Sent from my SPH-L710 using xda premium
Bag of rice is good. What I do is keep all the little silica packets from vitamins and aspirin bottles and add that to the rice. I also set it on top of a warm device like my wireless router with battery removed but in there with it. We live by a river where friends and family are always coming back with dunked phones and so far we have no bricks yet!
Edit - in a zip lock but not closed.
Sent from my SGH-I997 using xda premium
Catchpen said:
Bag of rice is good. What I do is keep all the little silica packets from vitamins and aspirin bottles and add that to the rice. I also set it on top of a warm device like my wireless router with battery removed but in there with it. We live by a river where friends and family are always coming back with dunked phones and so far we have no bricks yet!
Edit - in a zip lock but not closed.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
oooo ya I should've said that... don't close the bag or cover the pot or whatever you put it in....
If for some reason the rice doesn't work. It is pretty easy to take the phone apart. Since it is a touch. But you will have to be careful when removing the glass. I had to do this with my wife's phone. Use A tooth brush and rubbing alcohol. Good luck and I hope it works.
Sent from my SPH-D700 using xda premium
Thanks so much for all your great suggestions. I've got all of it in a bowl. My next step will be to take it apart and use the toothbrush/rubbing alcohol method. I desperately hope it doesn't come to that. I guess I'll find out in the morning!!! I'm saying my prayers tonight!
Keri
Disclaimer: I am not responsible for any damage to your phone by doing this demonstration.
I am half-crazy/half-scared today and thought what kind of protection does my phone have? What if it rains and I want take a picture or video of a wonderful scene or event?What if I accidentally drop my phone on a puddle or in a sink filled with water? So without further ado, please watch this very short video that demonstrates the level of protection in the Le Pro 3.
https://youtu.be/RgMyI_vmu4c
https://youtu.be/wCI5R1esqPw
IMHO, the phone may survive rainfall or quick dip in the water. The phone case may have helped as well. It feels good that our phone has this kind of protection when you need it. Again, I am not encouraging you to perform this test but just providing you some confidence that Le Pro 3 may survive accidental drop in or splash of the water.
P.S. The phone still works and I am still using it right after the test. No issue so far. =D
Joms_US said:
Disclaimer: I am not responsible for any damage to your phone by doing this demonstration.
I am half-crazy/half-scared today and thought what kind of protection does my phone have? What if it rains and I want take a picture or video of a wonderful scene or event?What if I accidentally drop my phone on a puddle or in a sink filled with water? So without further ado, please watch this very short video that demonstrates the level of protection in the Le Pro 3.
https://youtu.be/RgMyI_vmu4c
IMHO, the phone may survive rainfall or quick dip in the water. The phone case may have helped as well. It feels good that our phone has this kind of protection when you need it. Again, I am not encouraging you to perform this test but just providing you some confidence that Le Pro 3 may survive accidental drop in or splash of the water.
P.S. The phone still works and I am still using it right after the test. No issue so far. =D
Click to expand...
Click to collapse
damn, that's to much of a risk.
I think for a sealed phone like this the most risk is the speakers.... I hope your speakers are functioning properly. I recommend doing a rice treatment just to be safe. Even if it looks okay for now, the moisture can sip in over time.
suhridkhan said:
damn, that's to much of a risk.
I think for a sealed phone like this the most risk is the speakers.... I hope your speakers are functioning properly. I recommend doing a rice treatment just to be safe. Even if it looks okay for now, the moisture can sip in over time.
Click to expand...
Click to collapse
Or do an intensive benchmark so that heat will dissipate the moisture? I might do the rice trick later when I get home.
Quick update:
Phone still works 100%, even the speaker is as loud as before. And I did not do the rice trick yet. ^_^
You are great!!
Joms_US said:
Quick update:
Phone still works 100%, even the speaker is as loud as before. And I did not do the rice trick yet. ^_^
Click to expand...
Click to collapse
That's quite impressive for such a low priced phone. Just icing on the cake!
benjmiester said:
That's quite impressive for such a low priced phone. Just icing on the cake!
Click to expand...
Click to collapse
I guess the Le Pro 3 has a typical IP53 certification but just not advertised.
P.S Phone still works 100%, now I am tempted to take it to the next level. =D
Joms_US said:
I guess the Le Pro 3 has a typical IP53 certification but just not advertised.
P.S Phone still works 100%, now I am tempted to take it to the next level. =D
Click to expand...
Click to collapse
I would like to caution you one more time.
Most phones include a water damage sticker inside them, I think LP3 should also have one or two. Even if your phone works just fine, you might lose your warranty for future purposes, if those stickers get in touch of water.
Happy New Year!
Lets end the year with a bang!
https://youtu.be/wCI5R1esqPw
Joms_US said:
Lets end the year with a bang!
Click to expand...
Click to collapse
How about testing without a case
Regardless, you are crazy, careless, or wealthy to risk this!
slgooding said:
How about testing without a case
Regardless, you are crazy, careless, or wealthy to risk this!
Click to expand...
Click to collapse
Let's be realistic here, do you use your phone without a case at all? I don't, because it needs to be protected from scratches, bumps and fall (my daughter dropped it already 3.5 feet face down on cement floor).
The case was never designed to protect Le Pro 3 from water test like this but may have helped somehow because water will pass through case holes first before going into the phone itself.
I maybe crazy or careless but not wealthy LoL.
Joms_US said:
Let's be realistic here, do you use your phone without a case at all? I don't, because it needs to be protected from scratches, bumps and fall (my daughter dropped it already 3.5 feet face down on cement floor).
The case was never designed to protect Le Pro 3 from water test like this but may have helped somehow because water will pass through case holes first before going into the phone itself.
I maybe crazy or careless but not wealthy LoL.
Click to expand...
Click to collapse
This is my first most-expensive phone I have bought. (I know some of you American/European guys might be laughing at me but living in a country where an 'honors post-grad' earns average 600$/month and being married, it is hard to actually dedicate half of my monthly salary for buying a phone). I don't regret buying it but I agree with your every bit.
Thank you for testing this phone's resilience and reliability for rainy weather. Although camera isn't top notch but it will work for a carry-around instant snapshot purpose. (My G3 still beats this phone in camera quality but I care less, I don't even use camera at all )
dark_prince said:
This is my first most-expensive phone I have bought. (I know some of you American/European guys might be laughing at me but living in a country where an 'honors post-grad' earns average 600$/month and being married, it is hard to actually dedicate half of my monthly salary for buying a phone). I don't regret buying it but I agree with your every bit.
Thank you for testing this phone's resilience and reliability for rainy weather. Although camera isn't top notch but it will work for a carry-around instant snapshot purpose. (My G3 still beats this phone in camera quality but I care less, I don't even use camera at all )
Click to expand...
Click to collapse
No problem, have you tried Google Camera App? It will bring the IQ to few notches up up to level of Galaxy S6 or iPhone 7. Yes iPhone 7 IQ is horrendous by comparison even with Nexus 5X.
Hey guys,
today I dropped some beer over my Le Pro 3 and I instantly cleaned it (sucked out the liquid out of the charging port and speakers etc.)
But then I got a reboot from my phone, it says I'm out of battery (it got 40% at this moment)..
After reboot, my home button doesn't work anymore, no vibration, no interaction or something else..
I tried to dry it through put it in a bag of rice, but after 3 hours it doesn't changed the situation.
I'm now very desperately about this, do you guys got any tips for me?
Or should I just send it back through my reseller to LeEco for a retail?
Thank you for reading and replying to me!
Greetz
You could try the old trick of leaving your phone in a bag of rice over night to pull out all the moisture.
You can try to clean the usb c port, patiently and with care, with something very moist that can melt the sugars and absorb/remove all the beer residues on the contacts. Then dry out the area with the help of an hairdryer and try to turn on or reset your phone from recovery, if it starts! Good luck!
Sent from my LEX720 using XDA Labs
Ok guys, I just wrapped my phone in a tshirt (didn't found any rice in my home haha) and after 10 hours, my home hutton work again <3
I'm so happy rn!
Sony make.belive said:
Ok guys, I just wrapped my phone in a tshirt (didn't found any rice in my home haha) and after 10 hours, my home hutton work again <3
I'm so happy rn!
Click to expand...
Click to collapse
Good for you, the rice trick and hair blower saved mine last time when it plunged into a salty pool.
Joms_US said:
Good for you, the rice trick and hair blower saved mine last time when it plunged into a salty pool.
Click to expand...
Click to collapse
in what order do we need to do it? first hair blower and then rice trick?
SUMMERBREEZE said:
in what order do we need to do it? first hair blower and then rice trick?
Click to expand...
Click to collapse
- Turn off the phone right away
- Wash with clean water if phone was soiled/dunked in dirty/sweet/salty water
- Shake/Suck the water out
- Hair Blower for at least 15 mins
- Rice trick overnight
Good luck!