Develop Bugs

Bricked Defy with strange screen

Hi,
first i have to say that i read a lot of unbrick guides but none of them solved the problem.
My defy is right now stuck on white led when connected to a pc and no reaction when not connected.
This just happened after flashing the retail de sbf. before flashing the screen was blurred and flickering.
Therefore i have no possibilty for wiping or resets
Sry if i forgot any relevant information.
Hopefully anyone will have a good advice.
Greats

Hi. It looks to me like a flat battery. Have you charged the battery before flashing?
Sent from my MB525 using xda app-developers app

vvoytex said:
Hi. It looks to me like a flat battery. Have you charged the battery before flashing?
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
Hi
I've encountered the same problem
The fw I flashed in this site: http://sbf.droid-developers.org/umts_jordanplus/list.php (mine is Defy but the FW is for Defy+)
As you can see, there are some FWs with Unknown Carrier
I flashed one of them
When I flashed other FWs, the phone was stuck at boot screen (like you)
Here is the solution for my Defy:
- Unplug the phone
- Start RSD with your chosen FW (try your last run FW first)
- Plug the phone again
- If RSD detects your phone, your phone is alright. It just doesn't have the right FW
- Prepare a universal charger in case your Defy runs out of battery
- If you don't success with your last run FW, contact modder for solutions
Crossed fingers

The battary is ok cause i checked it on my dads Defy+
Even mr_5kools trick wont work cause i am not stuck at bootscreen. It does not even start up

Have you tried these threads:http://forum.xda-developers.com/showthread.php?t=1807899 and http://forum.xda-developers.com/showthread.php?t=1767672&highlight=bootloader

My defy doesnt work :S

I was changing my android version from 2.2.2 to ICS, and everything was fine until my battery died, i thought that it was a software problem and i did changed my system again using RSD Lite and i did bought a new battery.
Then when i turn ON my phone now is stuck in the bootloader screen, i did tried using with this SBF list:
http://sbf.droid-developers.org/umts_jordan/list.php
But nothing happens.
I dont know what to do....
What i am doing wrong?
Sorry for my bad english...
Otherwise the blue light on every startup doenst turn ON so i cant get the boot menu...

mafiurs said:
I was changing my android version from 2.2.2 to ICS, and everything was fine until my battery died, i thought that it was a software problem and i did changed my system again using RSD Lite and i did bought a new battery.
Then when i turn ON my phone now is stuck in the bootloader screen, i did tried using with this SBF list:
http://sbf.droid-developers.org/umts_jordan/list.php
But nothing happens.
I dont know what to do....
What i am doing wrong?
Sorry for my bad english...
Otherwise the blue light on every startup doenst turn ON so i cant get the boot menu...
Click to expand...
Click to collapse
Did the battery die in between the process.?
What SBF you flashed from the link.? Was it your stock SBF or some other.?

problem...
neo.ank said:
Did the battery die in between the process.?
What SBF you flashed from the link.? Was it your stock SBF or some other.?
Click to expand...
Click to collapse
The battery didnt die during the process, it just die an afternoon...
When i replace the battery it works fine for a while, until i used the RSD lite to change the Android version...
I cant remember exactly which SBF file i did used from the list, i think that could be the Claro Latin America´s file.

problem...
neo.ank said:
Did the battery die in between the process.?
What SBF you flashed from the link.? Was it your stock SBF or some other.?
Click to expand...
Click to collapse
Actually i can change the android version using the RSD lite system...
But none work :S
It is just stuck in the bootloader screen

does the battery charge when turned off?

problem...
i dont know if this is being charged when is turned off, but the battery works fine, it is on during all the process with the RSD lite...

try to boot into boatloader modus ,
If it says battery low cannot program you know what's wrong
If your battery don't charge use McGiver trick ,other battery or else
If it don't boot after flash with rsd
Factory reset from stock recovery would solve your problem
Sent from my MB526 using xda app-developers app

mafiurs said:
Actually i can change the android version using the RSD lite system...
But none work :S
It is just stuck in the bootloader screen
Click to expand...
Click to collapse
The problem might be the SBF you flashed.
Just try to get the details about the SBF you flashed.. At least the CG version.

problem
bone101 said:
try to boot into boatloader modus ,
If it says battery low cannot program you know what's wrong
If your battery don't charge use McGiver trick ,other battery or else
If it don't boot after flash with rsd
Factory reset from stock recovery would solve your problem
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
The Battery is fine and i cant get the Stock recovery mode...
Just appear an android logo with a " ! " symbol...

problem...
neo.ank said:
The problem might be the SBF you flashed.
Just try to get the details about the SBF you flashed.. At least the CG version.
Click to expand...
Click to collapse
I did flashed my defy with this sbf version:
DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf

problem...
The sbf that i flashed was this one:
DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf

you have flashed the worst sbf you could have. i am afraid to say that the phone is now in dire straights.
the battery fixes dont work for that bootloader on normal defy red lense phones. the only chance you may have is to read through my thread but ultimately it may not help so please do your own research before you come knocking down my door.
http://forum.xda-developers.com/showthread.php?t=1836958&page=2
i havent fixed the issue but i am able to use the phone but only if the battery is pre charged. no matter what i did or what battery fix i flashed i can not get the phone to either tell me how much charge is left or get it to charge the battery and sometimes i need he mcgyver trick to even get the phone boot.
basically i still havent properly tested it but i have an external battery pack on its way and will be able to confirm one way or the other tomorrow. if it goes as i hope then i will be able to charge the battery sing an external pack put the battery in the phone and use it until it runs dry. then i can charge the battery again using the battery pack and so on and so forth.
i am using white rabbit rom which has a cm7.2 base and is really very good. it also has four battery fixes you can download and there are a few more found dotted here there and everywhere on xda. you will have to search for them. all told i tried 6 and none have fixed the issue however you may have better luck than i did.
i have been told it is fixable but i didnt find one and have given up now. if the battery pack doesnt work then i am just gonna throw it in the drawer and buy another phone.
sorry to be the bearer of bad news.

mafiurs said:
The sbf that i flashed was this one:
DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf
Click to expand...
Click to collapse
Seriously.!! Why you didn't read before doing anything. Full SBFs kills the option to revert back.
Now flash that SBF again, see if you can boot into recovery and wipe data/factory reset.

rockmonkey1973 said:
you have flashed the worst sbf you could have. i am afraid to say that the phone is now in dire straights.
the battery fixes dont work for that bootloader on normal defy red lense phones. the only chance you may have is to read through my thread but ultimately it may not help so please do your own research before you come knocking down my door.
http://forum.xda-developers.com/showthread.php?t=1836958&page=2
i havent fixed the issue but i am able to use the phone but only if the battery is pre charged. no matter what i did or what battery fix i flashed i can not get the phone to either tell me how much charge is left or get it to charge the battery and sometimes i need he mcgyver trick to even get the phone boot.
basically i still havent properly tested it but i have an external battery pack on its way and will be able to confirm one way or the other tomorrow. if it goes as i hope then i will be able to charge the battery sing an external pack put the battery in the phone and use it until it runs dry. then i can charge the battery again using the battery pack and so on and so forth.
i am using white rabbit rom which has a cm7.2 base and is really very good. it also has four battery fixes you can download and there are a few more found dotted here there and everywhere on xda. you will have to search for them. all told i tried 6 and none have fixed the issue however you may have better luck than i did.
i have been told it is fixable but i didnt find one and have given up now. if the battery pack doesnt work then i am just gonna throw it in the drawer and buy another phone.
sorry to be the bearer of bad news.
Click to expand...
Click to collapse
You are not understanding, my battery is fine so i can turn on my phone without using the Mcgyver trick...
My defy is just stuck on the ( M ) screen, i read already others threads and they call it bricked, so my phone is bricked and i have to unbrick it.

mafiurs said:
You are not understanding, my battery is fine so i can turn on my phone without using the Mcgyver trick...
My defy is just stuck on the ( M ) screen, i read already others threads and they call it bricked, so my phone is bricked and i have to unbrick it.
Click to expand...
Click to collapse
Go into bootloader by pressing Power button and Vol+ button
Connect your phone to your PC via USB cable
Make sure everything is OK
Locate downloaded SBF. In popup dialog press Uncompress and start flashing
If you get " Please manually power up this phone " in RSD Lite pull battery out > put your battery back > reboot into stock recovery by holding Power button and Vol- button > Choose Wipe data/cache > Choose Reboot system now
That's it, you unbricked your Defy!

mafiurs said:
You are not understanding, my battery is fine so i can turn on my phone without using the Mcgyver trick...
My defy is just stuck on the ( M ) screen, i read already others threads and they call it bricked, so my phone is bricked and i have to unbrick it.
Click to expand...
Click to collapse
actually i did understand totally what you said and if you had read the thread i linked to you would have found the answer in there but no big deal because neo.ank has spelled it out for. do that and the phone will boot again.
the problem comes after you have got the phone flashed and running again and i guess in that respect you didnt understand what i wrote.
if when you get the sbf up and running can you please post back on this thread and let us know if the battery charges and is registered as being used... ie the percentage drops down after 2 hours of use from say 100 to 90 or whatever.
i am very keen to hear if your battery will work when you have the sbf flashed and running though so please do post back and confirm one way or the other. cheers and good luck.

THANKS!!!!
neo.ank said:
Go into bootloader by pressing Power button and Vol+ button
Connect your phone to your PC via USB cable
Make sure everything is OK
Locate downloaded SBF. In popup dialog press Uncompress and start flashing
If you get " Please manually power up this phone " in RSD Lite pull battery out > put your battery back > reboot into stock recovery by holding Power button and Vol- button > Choose Wipe data/cache > Choose Reboot system now
That's it, you unbricked your Defy!
Click to expand...
Click to collapse
Thanks a lot my Defy is back to life, the battery works fine and it gets charged at 100% without problems.
Now i just have to change the android version, i dont like that my computer sees a MB526 instead MB525.

mafiurs said:
Thanks a lot my Defy is back to life, the battery works fine and it gets charged at 100% without problems.
Now i just have to change the android version, i dont like that my computer sees a MB526 instead MB525.
Click to expand...
Click to collapse
hmm thanks for replying.
are you running the stock sbf? if you try a custom rom can you let me know if the battery works and which rom you are running. did you flash a battery fix or did it work straight away with no issues?
anyways glad to hear it is all ok and if anything changes if you flash a custom rom let us know.

mafiurs said:
Thanks a lot my Defy is back to life, the battery works fine and it gets charged at 100% without problems.
Now i just have to change the android version, i dont like that my computer sees a MB526 instead MB525.
Click to expand...
Click to collapse
Don't try to do anything about it. It won't change.. It will remain MB526.. That's why it is said to be non-downgradable.

rockmonkey1973 said:
hmm thanks for replying.
are you running the stock sbf? if you try a custom rom can you let me know if the battery works and which rom you are running. did you flash a battery fix or did it work straight away with no issues?
anyways glad to hear it is all ok and if anything changes if you flash a custom rom let us know.
Click to expand...
Click to collapse
Ok i will but for now i like the sbf´s rom and the battery is fine it get charged at 100%...

[Q] Boot problem with my p6

Hey guys,
I was running blueandroid custom rom on my p6 and it was all working fine. suddenly my phone shut down and since that moment i can't find a way to turn it on further then the huawei logo. pressing all three buttons for the forced update doesn't work. and i can't get in recovery. It simply doesn't make it till that point. sometimes it shows a random color (the whole screen) but most of the time it just shuts down at the huawei logo... i also tried fastboot but it doesn't get recognized...
could anyone help me?
i'd really aprecciate it.

Are you able to use adb?
If yes, try to flash twrp recovery via ADB.
Instructions in forum thread. (I think 2nd post)
Sent from my P6-U06 using xda app-developers app

Larsbehrens said:
Hey guys,
I was running blueandroid custom rom on my p6 and it was all working fine. suddenly my phone shut down and since that moment i can't find a way to turn it on further then the huawei logo. pressing all three buttons for the forced update doesn't work. and i can't get in recovery. It simply doesn't make it till that point. sometimes it shows a random color (the whole screen) but most of the time it just shuts down at the huawei logo... i also tried fastboot but it doesn't get recognized...
could anyone help me?
i'd really aprecciate it.
Click to expand...
Click to collapse
Is your p6 low on battery? If it is, charge it up before trying to get to recovery.

bokchoi2020 said:
Is your p6 low on battery? If it is, charge it up before trying to get to recovery.
Click to expand...
Click to collapse
It doesnt charge ( the led doesnt turn on and im pretty sure that doesnt) and i havent been able to try adb. Its also quite strange that it wont be in a stable recovery mode ( or fastboot mode) since it turn itself off after 10/20 seconds.

getting really lost
So guys,
i'm really starting to think i need to bring mine to the service center cus it's completely dead.
it won't charge, it doens't get into recovery mode, i can't flash the official firmware with the sdcart/dload/update.app way, i can't fastboot it cus it won't go in fastboot mode (the way it get stuck on the splash screen/huawei logo), and it shuts itself down after 20 seconds leaving nothing else then a black but brightened screen.....
i'm afraid i have to take full costs due my root and custom rom, if they can fix/see it at all.
it worked fine after all and shut down with no reason what makes me think this is a hardware problem.
does anyone else have any suggestions before i bring it to the service center?
thanks

Let it charge for 24 hours,see if you can turn it on after that.
HUAWEIAscendP6

HUAWEIAscendP6 said:
Let it charge for 24 hours,see if you can turn it on after that.
HUAWEIAscendP6
Click to expand...
Click to collapse
It has been on the charger for more than 24 hours, nothing has changed, still doesnt seem to charge.

larsbehrens1 said:
It has been on the charger for more than 24 hours, nothing has changed, still doesnt seem to charge.
Click to expand...
Click to collapse
No led?

HUAWEIAscendP6 said:
No led?
Click to expand...
Click to collapse
Nope, the only led that ive been able to see is the red one for 1/4th of a second in SOME cases when i try to boot it.

larsbehrens1 said:
Nope, the only led that ive been able to see is the red one for 1/4th of a second in SOME cases when i try to boot it.
Click to expand...
Click to collapse
But thats's ok, this is a common android problem, but some phone must be charged for al least two days, and after that try to flash another ROM. Even if the led is not always on, let it for a long time to charge, trust me, the power will be inside your battery, not full but enough to resist/handle a new ROM flashing.

HUAWEIAscendP6 said:
But thats's ok, this is a common android problem, but some phone must be charged for al least two days, and after that try to flash another ROM. Even if the led is not always on, let it for a long time to charge, trust me, the power will be inside your battery, not full but enough to resist/handle a new ROM flashing.
Click to expand...
Click to collapse
Yea i know that... But it doesnt show the led when i charge it (so the led has nothing to do with the charging state of the phone), only in some cases when i try to boot into recovery. And the battery cant actually be totally empty, it was 40% when it totally crashed so i dont think thats the problem. And if so, it should at least get to the point where it is trying to flash the original firmware

larsbehrens1 said:
Yea i know that... But it doesnt show the led when i charge it (so the led has nothing to do with the charging state of the phone), only in some cases when i try to boot into recovery. And the battery cant actually be totally empty, it was 40% when it totally crashed so i dont think thats the problem. And if so, it should at least get to the point where it is trying to flash the original firmware
Click to expand...
Click to collapse
What tool are you using for flashing? Or you try to install it from sdcard?

HUAWEIAscendP6 said:
What tool are you using for flashing? Or you try to install it from sdcard?
Click to expand...
Click to collapse
Im trying to flash it thru the sdcard with the update.app in sdcart/dload/update.app but to do that, you have to put in a certain mode (by holding vol+ and vol- and the power button) . But once again, i cant put the phone in A state, doesnt matter which state. It just wont get in a stable mode. Thats why i cant use fastboot/adb

larsbehrens1 said:
Im trying to flash it thru the sdcard with the update.app in sdcart/dload/update.app but to do that, you have to put in a certain mode (by holding vol+ and vol- and the power button) . But once again, i cant put the phone in A state, doesnt matter which state. It just wont get in a stable mode. Thats why i cant use fastboot/adb
Click to expand...
Click to collapse
That button combination if for internal storage dload folder. Put your ROM on the sdcard. Enter CWM or TWRP and flash it throu there.

HUAWEIAscendP6 said:
That button combination if for internal storage dload folder. Put your ROM on the sdcard. Enter CWM or TWRP and flash it throu there.
Click to expand...
Click to collapse
I wish i could acces CWM cus then i wouldn't have this problem at all.... but i already said that i can't get my phone in a stable state, or any state. so i can NOT acces CMW

Larsbehrens said:
I wish i could acces CWM cus then i wouldn't have this problem at all.... but i already said that i can't get my phone in a stable state, or any state. so i can NOT acces CMW
Click to expand...
Click to collapse
Let it charge to your wall outlet,not through usb cable.
HUAWEIAscendP6

HUAWEIAscendP6 said:
Let it charge to your wall outlet,not through usb cable.
HUAWEIAscendP6
Click to expand...
Click to collapse
Already doong that for the past 48 hours

Bringing it back
So guys,
Im going to the service center in 8 hours since my phone is completely DEAD. It doest charge and it does not even react to the power button anymore... (Probably cus the battery is completely drained), it doesnt react to anything else either (usb, power net, anything) and will nog be able to fix by connecting it thru a computer. Aka its hopeless...
Thanks for the support

Ive been to the service center, got a new phone directly, so everything is solved. For the information, my problem was a (like i expected) hardware problem, and there was NO way to fix without replacing hardware.
Sent from my HUAWEI P6-U06 using XDA Premium 4 mobile app

Larsbehrens said:
Ive been to the service center, got a new phone directly, so everything is solved. For the information, my problem was a (like i expected) hardware problem, and there was NO way to fix without replacing hardware.
Sent from my HUAWEI P6-U06 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Good news.

[Q] Note-II N7100 Power Button

Hi,
My Note-II has some issues with the power button, most probably something with the power chip.
The Technicians say that repairing it might leave the phone useless.
I was OK with that as I was using a widget to put the phone to sleep and using some battery removal tweaks to start it if it was switched off.
The problem now is that my phone is still on 4.1.2 I am in Oman my friends having the same model and build got the update but I haven't received it yet so thought I would upgrade manually via Odin or maybe Root it.
Is there any way I could put the phone in Recovery Mode without using the power button????
Please suggest a work around.
TIA

syed hasan rizvi said:
Hi,
My Note-II has some issues with the power button, most probably something with the power chip.
The Technicians say that repairing it might leave the phone useless.
I was OK with that as I was using a widget to put the phone to sleep and using some battery removal tweaks to start it if it was switched off.
The problem now is that my phone is still on 4.1.2 I am in Oman my friends having the same model and build got the update but I haven't received it yet so thought I would upgrade manually via Odin or maybe Root it.
Is there any way I could put the phone in Recovery Mode without using the power button????
Please suggest a work around.
TIA
Click to expand...
Click to collapse
Strange question lol...
If you are rooted you can use quick reboot app to boot into recovery...
Not an issue..
And prefer rooting and updating Cz official updates give you knox.. And thats what most of the people dont want...
Sent from my GT-N7100 using XDA Premium 4 mobile app

Yes I know it's a strange situation.
No I'm not rooted.
I want to enter recovery to either root the phone or just update it.
But as the power button is messed up so I can't do any of the above by the normal method.
I need to know if there is any other method to enter the recovery...

[Q&A] [ROM] [4.4.4] Unofficial CyanogenMod 11

Q&A for [ROM] [4.4.4] Unofficial CyanogenMod 11
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

i have problem with installing zip.
"This packeg is for "a5,a5dug,a5dwg,a5chl,a5ul" devices; this is a "htc_a5dug".
Installation aborted.
Any help?

error
Hey man why I install my Rom is 4.00 gb and available 2.30GB

djgrubas said:
i have problem with installing zip.
"This packeg is for "a5,a5dug,a5dwg,a5chl,a5ul" devices; this is a "htc_a5dug".
Installation aborted.
Any help?
Click to expand...
Click to collapse
@djgrubas
You need to use the NEWER ClockworkMod that is in the CM11 main/first post. Its actually an newer version than the one that's in the .exe and in the CWM thread.
idevilismanian said:
Hey man why I install my Rom is 4.00 gb and available 2.30GB
Click to expand...
Click to collapse
@idevilismanian
If you installed the largest GAPPS package available for CM/AOK/SP this will happen. This ROM works just as well with the core 4.4.2/4 GAPPS as well and will give more space available.
Sent from my 710C using XDA Free mobile app

rom4GB
i have plomblem after i install cm11 my device see 4GB and avable 2.3Gb

Is there a way to flash the new recovery.IMG other than pushing via fastboot, ? And what do you mean by offline charging?

aftertzf said:
Is there a way to flash the new recovery.IMG other than pushing via fastboot, ? And what do you mean by offline charging?
Click to expand...
Click to collapse
Yes there is an app called Rashr that can flash recoveries. And I think he means now the phone can charge while in recovery mode. Not sure though.

FoxyDrew said:
Yes there is an app called Rashr that can flash recoveries. And I think he means now the phone can charge while in recovery mode. Not sure though.
Click to expand...
Click to collapse
Installed, flashed, no cables

Flashify too...
Sent from my D816w using XDA Free mobile app

sudden death and no sign of anything
hello ,
i've bought the desire 816 2 months ago and i started using CM11 the unofficial 4.4.4 version two weeks ago
and from one week i started using mount2ext and moved everything but system apps , libraries and dalvic to the the sd card
everything was fine till this morning the alarm ranged ( i left the phone in the electricity the day before ) so i stopped it removed the phone from charging and went out for an hour while the phone is home . when i'm home the phone is dead. i can't power the device i tried the power bottom , power + vol up + vol down , power + vol down and nothing happened ! the screen won't even open. also i tried charging it and even the light of charging didn't light. the only place when the i knew it's somehow alive is when i connected the phone to pc and try to power it the pc says unknown device and also nothing happens.
any ideas ?

Iam getting force closes.... The message system ui has stopped working pops up and when I press ok it returns to the lock screen..... Does anybody else have this issue?
It started happening after restoring apps and rebooting
Sent from my Desire 816 dual sim using XDA Premium 4 mobile app

xxqxpxx said:
hello ,
i've bought the desire 816 2 months ago and i started using CM11 the unofficial 4.4.4 version two weeks ago
and from one week i started using mount2ext and moved everything but system apps , libraries and dalvic to the the sd card
everything was fine till this morning the alarm ranged ( i left the phone in the electricity the day before ) so i stopped it removed the phone from charging and went out for an hour while the phone is home . when i'm home the phone is dead. i can't power the device i tried the power bottom , power + vol up + vol down , power + vol down and nothing happened ! the screen won't even open. also i tried charging it and even the light of charging didn't light. the only place when the i knew it's somehow alive is when i connected the phone to pc and try to power it the pc says unknown device and also nothing happens.
any ideas ?
Click to expand...
Click to collapse
To hard reset/force power off the device it is volume up+power for 15 seconds. That'll get your device turned off and you can boot back up.
Sent from my 710C using XDA Free mobile app

not RECEIVING mms messages
I can send mms messages but not receive them. Running the 10/18 build with xposed, but it didn't work before xposed either. Tried fiddling with apn settings but nothing fixed it. Thoughts/help/fixes?

braxton12 said:
I can send mms messages but not receive them. Running the 10/18 build with xposed, but it didn't work before xposed either. Tried fiddling with apn settings but nothing fixed it. Thoughts/help/fixes?
Click to expand...
Click to collapse
You need to flash the APN fix, then the MMS fix.

FoxyDrew said:
You need to flash the APN fix, then the MMS fix.
Click to expand...
Click to collapse
Where can I find those?

So this ROM states it supports all models, but I had an issue. When I flashed the nightly zip, I get an error 7 saying it is not compatible with my model. It claims my model is htc_a5dug (my phone is the Virgin Mobile model) while it only supports plain a5_dug. Any ideas? Oh I'm running newest available CWM if that's any difference..

the_Victorian said:
So this ROM states it supports all models, but I had an issue. When I flashed the nightly zip, I get an error 7 saying it is not compatible with my model. It claims my model is htc_a5dug (my phone is the Virgin Mobile model) while it only supports plain a5_dug. Any ideas? Oh I'm running newest available CWM if that's any difference..
Click to expand...
Click to collapse
The Virgin Mobile model is a5chl. And I'm assuming it's because you didn't use the recovery in the OP. Try to use that recovery then flash it, however I recommend you just use the Official CM11 as it works with any recovery.

a little off topic here
i bought my htc desire 816 a5_ul single sim version in malaysia, where can i can the stock firmware? which version? india, australia or europe?

Pls help me my phone is stuck in the logo of cm 12 since i download and flash a wrong update. I cnt go back to recovery . i totally mess my desire 816

brick88 said:
Pls help me my phone is stuck in the logo of cm 12 since i download and flash a wrong update. I cnt go back to recovery . i totally mess my desire 816
Click to expand...
Click to collapse
First of all, wrong thread! But anyways, just hold volume up (or power down i forget) and power for ten second's till it reeboots. Or just wait till the battery dies...