My defy doesnt work :S - Defy General

I was changing my android version from 2.2.2 to ICS, and everything was fine until my battery died, i thought that it was a software problem and i did changed my system again using RSD Lite and i did bought a new battery.
Then when i turn ON my phone now is stuck in the bootloader screen, i did tried using with this SBF list:
http://sbf.droid-developers.org/umts_jordan/list.php
But nothing happens.
I dont know what to do....
What i am doing wrong?
Sorry for my bad english...
Otherwise the blue light on every startup doenst turn ON so i cant get the boot menu...

mafiurs said:
I was changing my android version from 2.2.2 to ICS, and everything was fine until my battery died, i thought that it was a software problem and i did changed my system again using RSD Lite and i did bought a new battery.
Then when i turn ON my phone now is stuck in the bootloader screen, i did tried using with this SBF list:
http://sbf.droid-developers.org/umts_jordan/list.php
But nothing happens.
I dont know what to do....
What i am doing wrong?
Sorry for my bad english...
Otherwise the blue light on every startup doenst turn ON so i cant get the boot menu...
Click to expand...
Click to collapse
Did the battery die in between the process.?
What SBF you flashed from the link.? Was it your stock SBF or some other.?

problem...
neo.ank said:
Did the battery die in between the process.?
What SBF you flashed from the link.? Was it your stock SBF or some other.?
Click to expand...
Click to collapse
The battery didnt die during the process, it just die an afternoon...
When i replace the battery it works fine for a while, until i used the RSD lite to change the Android version...
I cant remember exactly which SBF file i did used from the list, i think that could be the Claro Latin America´s file.

problem...
neo.ank said:
Did the battery die in between the process.?
What SBF you flashed from the link.? Was it your stock SBF or some other.?
Click to expand...
Click to collapse
Actually i can change the android version using the RSD lite system...
But none work :S
It is just stuck in the bootloader screen

does the battery charge when turned off?

problem...
i dont know if this is being charged when is turned off, but the battery works fine, it is on during all the process with the RSD lite...

try to boot into boatloader modus ,
If it says battery low cannot program you know what's wrong
If your battery don't charge use McGiver trick ,other battery or else
If it don't boot after flash with rsd
Factory reset from stock recovery would solve your problem
Sent from my MB526 using xda app-developers app

mafiurs said:
Actually i can change the android version using the RSD lite system...
But none work :S
It is just stuck in the bootloader screen
Click to expand...
Click to collapse
The problem might be the SBF you flashed.
Just try to get the details about the SBF you flashed.. At least the CG version.

problem
bone101 said:
try to boot into boatloader modus ,
If it says battery low cannot program you know what's wrong
If your battery don't charge use McGiver trick ,other battery or else
If it don't boot after flash with rsd
Factory reset from stock recovery would solve your problem
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
The Battery is fine and i cant get the Stock recovery mode...
Just appear an android logo with a " ! " symbol...

problem...
neo.ank said:
The problem might be the SBF you flashed.
Just try to get the details about the SBF you flashed.. At least the CG version.
Click to expand...
Click to collapse
I did flashed my defy with this sbf version:
DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf

problem...
The sbf that i flashed was this one:
DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf

you have flashed the worst sbf you could have. i am afraid to say that the phone is now in dire straights.
the battery fixes dont work for that bootloader on normal defy red lense phones. the only chance you may have is to read through my thread but ultimately it may not help so please do your own research before you come knocking down my door.
http://forum.xda-developers.com/showthread.php?t=1836958&page=2
i havent fixed the issue but i am able to use the phone but only if the battery is pre charged. no matter what i did or what battery fix i flashed i can not get the phone to either tell me how much charge is left or get it to charge the battery and sometimes i need he mcgyver trick to even get the phone boot.
basically i still havent properly tested it but i have an external battery pack on its way and will be able to confirm one way or the other tomorrow. if it goes as i hope then i will be able to charge the battery sing an external pack put the battery in the phone and use it until it runs dry. then i can charge the battery again using the battery pack and so on and so forth.
i am using white rabbit rom which has a cm7.2 base and is really very good. it also has four battery fixes you can download and there are a few more found dotted here there and everywhere on xda. you will have to search for them. all told i tried 6 and none have fixed the issue however you may have better luck than i did.
i have been told it is fixable but i didnt find one and have given up now. if the battery pack doesnt work then i am just gonna throw it in the drawer and buy another phone.
sorry to be the bearer of bad news.

mafiurs said:
The sbf that i flashed was this one:
DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf
Click to expand...
Click to collapse
Seriously.!! Why you didn't read before doing anything. Full SBFs kills the option to revert back.
Now flash that SBF again, see if you can boot into recovery and wipe data/factory reset.

rockmonkey1973 said:
you have flashed the worst sbf you could have. i am afraid to say that the phone is now in dire straights.
the battery fixes dont work for that bootloader on normal defy red lense phones. the only chance you may have is to read through my thread but ultimately it may not help so please do your own research before you come knocking down my door.
http://forum.xda-developers.com/showthread.php?t=1836958&page=2
i havent fixed the issue but i am able to use the phone but only if the battery is pre charged. no matter what i did or what battery fix i flashed i can not get the phone to either tell me how much charge is left or get it to charge the battery and sometimes i need he mcgyver trick to even get the phone boot.
basically i still havent properly tested it but i have an external battery pack on its way and will be able to confirm one way or the other tomorrow. if it goes as i hope then i will be able to charge the battery sing an external pack put the battery in the phone and use it until it runs dry. then i can charge the battery again using the battery pack and so on and so forth.
i am using white rabbit rom which has a cm7.2 base and is really very good. it also has four battery fixes you can download and there are a few more found dotted here there and everywhere on xda. you will have to search for them. all told i tried 6 and none have fixed the issue however you may have better luck than i did.
i have been told it is fixable but i didnt find one and have given up now. if the battery pack doesnt work then i am just gonna throw it in the drawer and buy another phone.
sorry to be the bearer of bad news.
Click to expand...
Click to collapse
You are not understanding, my battery is fine so i can turn on my phone without using the Mcgyver trick...
My defy is just stuck on the ( M ) screen, i read already others threads and they call it bricked, so my phone is bricked and i have to unbrick it.

mafiurs said:
You are not understanding, my battery is fine so i can turn on my phone without using the Mcgyver trick...
My defy is just stuck on the ( M ) screen, i read already others threads and they call it bricked, so my phone is bricked and i have to unbrick it.
Click to expand...
Click to collapse
Go into bootloader by pressing Power button and Vol+ button
Connect your phone to your PC via USB cable
Make sure everything is OK
Locate downloaded SBF. In popup dialog press Uncompress and start flashing
If you get " Please manually power up this phone " in RSD Lite pull battery out > put your battery back > reboot into stock recovery by holding Power button and Vol- button > Choose Wipe data/cache > Choose Reboot system now
That's it, you unbricked your Defy!

mafiurs said:
You are not understanding, my battery is fine so i can turn on my phone without using the Mcgyver trick...
My defy is just stuck on the ( M ) screen, i read already others threads and they call it bricked, so my phone is bricked and i have to unbrick it.
Click to expand...
Click to collapse
actually i did understand totally what you said and if you had read the thread i linked to you would have found the answer in there but no big deal because neo.ank has spelled it out for. do that and the phone will boot again.
the problem comes after you have got the phone flashed and running again and i guess in that respect you didnt understand what i wrote.
if when you get the sbf up and running can you please post back on this thread and let us know if the battery charges and is registered as being used... ie the percentage drops down after 2 hours of use from say 100 to 90 or whatever.
i am very keen to hear if your battery will work when you have the sbf flashed and running though so please do post back and confirm one way or the other. cheers and good luck.

THANKS!!!!
neo.ank said:
Go into bootloader by pressing Power button and Vol+ button
Connect your phone to your PC via USB cable
Make sure everything is OK
Locate downloaded SBF. In popup dialog press Uncompress and start flashing
If you get " Please manually power up this phone " in RSD Lite pull battery out > put your battery back > reboot into stock recovery by holding Power button and Vol- button > Choose Wipe data/cache > Choose Reboot system now
That's it, you unbricked your Defy!
Click to expand...
Click to collapse
Thanks a lot my Defy is back to life, the battery works fine and it gets charged at 100% without problems.
Now i just have to change the android version, i dont like that my computer sees a MB526 instead MB525.

mafiurs said:
Thanks a lot my Defy is back to life, the battery works fine and it gets charged at 100% without problems.
Now i just have to change the android version, i dont like that my computer sees a MB526 instead MB525.
Click to expand...
Click to collapse
hmm thanks for replying.
are you running the stock sbf? if you try a custom rom can you let me know if the battery works and which rom you are running. did you flash a battery fix or did it work straight away with no issues?
anyways glad to hear it is all ok and if anything changes if you flash a custom rom let us know.

mafiurs said:
Thanks a lot my Defy is back to life, the battery works fine and it gets charged at 100% without problems.
Now i just have to change the android version, i dont like that my computer sees a MB526 instead MB525.
Click to expand...
Click to collapse
Don't try to do anything about it. It won't change.. It will remain MB526.. That's why it is said to be non-downgradable.

rockmonkey1973 said:
hmm thanks for replying.
are you running the stock sbf? if you try a custom rom can you let me know if the battery works and which rom you are running. did you flash a battery fix or did it work straight away with no issues?
anyways glad to hear it is all ok and if anything changes if you flash a custom rom let us know.
Click to expand...
Click to collapse
Ok i will but for now i like the sbf´s rom and the battery is fine it get charged at 100%...

Related

Hard Brick in my Defy...Help-me!!!

Good evening everyone,
I own a Motorola Defy, and tried to put the ROM "For Adlxmod Froyo Defy, "but I had the UK firmware 2.51.1.
It was there that a lack of attention, my phone now does not care anymore.
He only gets a white LED lit in front of him and does not happen any more, nor even acknowledge again by RSD.
I read in several places that this is due to firmware 2:51 and I believe I have given a HARD BRICK on my device.
Has some way to fix my phone without having to take it to an authorized?
I thank everyone's help,
Felipe
Deleted by user
Thanks, I managed to settle with the tip given!
Hello Everyone,
My Defy run out of juce with a special 3400mAh battery from china in the night. When I came home I changed the battery (the stock battery) which was fully charged. After that the defy was stuck in a bootloop (cm7) but i did not recognize this for a couple of hours. Because of this bootloop I removed the battery and put it in again from that time on the defy was dead. Maybe I did not wait long enough - I mean I saw the bootloop and thought 'crap' took the battery out and stuffed it right in again (I was a bit frustrated). Maybe i should have waited at least 5-10 seconds before putting the battery in again?
I tried to get access to the defy by RSD lite. But the PC does not recognize it. I got a white LED by connecting it to the PC. The defy is recognized only for to seconds and than disconnects again.
I tried to flash via sbf_flash on ubuntu without any result. The defy is simply not recognized. Only white LED. No Bootloader, no recovery, no logo.
Has anyone a suggestion? Is there a possibility to get acess to the defy to reflassh everything. Since the white LED is active there has to be a way. What about JTAG and riffbox? could this be a solution and if yes - how ?
I bought a used iPhone4 last week. But honestly: I hate it!! I do not like iOS, I dont like the edges of the iPhone - it is so uncomfortable to hold it in the hands. Wifi connectivity and connection is catastrophic. I will sell it a.s.a.p. again.
I want just my beloved defy back - the only phone I ever loved !! I appreciate any suggestions - thanks in advance !!
Your "special" battery is not that special afterall
What happened to your stock battery? Just get it charged - ask a friend with a Defy to charge it for you or do the McGyver trick, in order to fire it up again and then flash your stock SBF via RSD Lite. Calm down - Defy is like a Terminator and is immortal (as long as you don't kill it by flashing wrong SBF )
Thank you for the reply. However I have a dockingstation for the defy with which I can charge the battery without the phone. The battery is full for sure!
Hope you are right that the defy is like the Terminator - I have not lost hope yet.
Any other suggestions ?!
If Defy doesn't even get into bootloader, this means there is no juice in the battery. No matter what crap one would flash, bootloader is ALWAYS accessable! That's the beauty of the locked bootloader - you can't kill it! So as long as there is charge in the battery, you can always get into bootloader (Vol up + Power) and flash a new sbf. Peace of advice: don't trust your cheap, no-name, chinese battery. Use the original one, charged in another Defy phone, so you can make sure it really IS charged. The fact you left it in an external charger, doesn't mean it is charged - battery might not be working, charger may not be working, or both at the same time might not be working. There is no reason not to get into bootloader if there is charge in the battery
Cheers!
Auris 1.6 vvt-i said:
If Defy doesn't even get into bootloader, this means there is no juice in the battery. No matter what crap one would flash, bootloader is ALWAYS accessable! That's the beauty of the locked bootloader - you can't kill it! So as long as there is charge in the battery, you can always get into bootloader (Vol up + Power) and flash a new sbf. Peace of advice: don't trust your cheap, no-name, chinese battery. Use the original one, charged in another Defy phone, so you can make sure it really IS charged. The fact you left it in an external charger, doesn't mean it is charged - battery might not be working, charger may not be working, or both at the same time might not be working. There is no reason not to get into bootloader if there is charge in the battery
Cheers!
Click to expand...
Click to collapse
Spot on
Sent from my MB525 using xda premium
my defy have a hard brick too.. I had to flash via SBF, but it occurs when the input loop gmail account, each starting up the account, there was a restart .. and now the Defy could not turn on .. whether the factors that depleted battery??
Auris 1.6 vvt-i said:
If Defy doesn't even get into bootloader, this means there is no juice in the battery. No matter what crap one would flash, bootloader is ALWAYS accessable! That's the beauty of the locked bootloader - you can't kill it! So as long as there is charge in the battery, you can always get into bootloader (Vol up + Power) and flash a new sbf. Peace of advice: don't trust your cheap, no-name, chinese battery. Use the original one, charged in another Defy phone, so you can make sure it really IS charged. The fact you left it in an external charger, doesn't mean it is charged - battery might not be working, charger may not be working, or both at the same time might not be working. There is no reason not to get into bootloader if there is charge in the battery
Cheers!
Click to expand...
Click to collapse
My Defy+ don't enter on bootloader anymore, just white light and RSD Lite is working. Had you saw this behavior before?
duduzerah said:
My Defy+ don't enter on bootloader anymore, just white light and RSD Lite is working. Had you saw this behavior before?
Click to expand...
Click to collapse
It's blank screen problem, happens when you flashed an SBF older than your previous one.
You still can get into Bootloader, just nothing on screen but it's definitely in there. Then flash the right SBF, the same or higher build than your previous stock rom successfuly to fix it.
Which SBF are higher than other? It's about Bootloader(BL) version, read here. http://forum.xda-developers.com/showthread.php?t=966537
If not sure, try DFP-231 builds, it's highest BL version to ensure fixing this.
intemptesta said:
It's blank screen problem, happens when you flashed an SBF older than your previous one.
You still can get into Bootloader, just nothing on screen but it's definitely in there. Then flash the right SBF, the same or higher build than your previous stock rom successfuly to fix it.
Which SBF are higher than other? It's about Bootloader(BL) version, read here. http://forum.xda-developers.com/showthread.php?t=966537
If not sure, try DFP-231 builds, it's highest BL version to ensure fixing this.
Click to expand...
Click to collapse
I have the same problem as last post (blank screen) with my DEFY (not plus). I flashed DFP-231 but now the boot stops at M logo. I`ve tried power+volume down but cannot access stock recovery. Any suggestions?
Jeff
jhys06567 said:
I have the same problem as last post (blank screen) with my DEFY (not plus). I flashed DFP-231 but now the boot stops at M logo. I`ve tried power+volume down but cannot access stock recovery. Any suggestions?
Jeff
Click to expand...
Click to collapse
Look, I've suggested to one who use Defy+, so I said he should try DFP-231.
But not for Defy mb525, you shouldn't flash DFP-231 or any 2.3.x SBF files to your mb525...
Now you've stuck to Bootloader V.7 and no way back.
What's done is done, stick to that DFP-231 SBF you've flashed for now.
Did your flash finish with "Finish/pass" or "Please manually power up phone"?
If it Finish/pass then try again on Stock recovery, you almost there.
But if "Please manually power up phone", means you're not yet flashed your phone completely...
So do this, http://forum.xda-developers.com/showthread.php?p=38187413

Vibrates 7 times

I just rooted my HTC Desire and installed CM7 on it (loved it on my HTC Legend). But suddenly today, after I turned Wifi on, it started rebooting all the time, couldn't do anything to stop it. I thought "Hey, there was the radio flash thing in the tutorial that I didn't do yet, I'll try that out" so I flashed the radio. Then I chose reboot system, but it just booted to a logo with an android coming out of a trash can, and looked kinda stuck there. So I took out the battery and plugged back in. Now if I try to turn it on, it'll just vibrate 7 times - no picture or anything. Also there's no LED when I plug it to the charger.
I had those 7 vibrates too.
Happened after i flashed the cm7 hboot over my stock hboot while trying to enter recovery. After i re-flashed my recovery using fastboot, everything worked again. What happens if you try to power up while holding down vol- ? Did you use fastboot or your phones recovery mode to install the radio?
I am not able to start in recovery or anything. I tried vol. down + power and back + power and no matter what I try, it just vibrates 7 times. I used the recovery mode to install the radio.
You could try to connect your phone via usb and check if fastboot discovers your device. If yes, flash hboot and recovery using fastboot. If not, well... i dont have a clue. Sorry :/
Computer discovers nothing when I plug in the phone.
Bad news when u pulled battery u interrupt the process n u now have a bricked device I would b very surprised if u managed to do anything
Pulling battery when doin a radio update is a BIG NO NO I'm sorry but ur stuck with a 400+ mirror now
Please look at this link
http://www.google.co.uk/m/search?site=images&client=ms-android-htc&hl=en&gl=uk&source=mog&aq=&oq=&aqi=&fkt=&fsdt=&cqt=&rst=&htf=&his=&maction=&q=android+radio+update#i=95
If that the image u saw when u pulled battery ur defo screwed
The Best Things Come To Those Who Wait
Your link doesn't work.. I found a picture of what was showing when I unplugged the battery, but I'm not allowed to post links to other sites on these forums yet.
U need to copy the link for some reason its not showing up
Pm the link u have
The Best Things Come To Those Who Wait
Inrego said:
Your link doesn't work.. I found a picture of what was showing when I unplugged the battery, but I'm not allowed to post links to other sites on these forums yet.
Click to expand...
Click to collapse
inrego
yes the image u just sent me is correct
the image showing would of ment it was installing the radio and because u pulled battery u have corrupt the flash and unfortuntly bricked ur device
i will look for a solution on the net but im not sure if ill find anythink sorrry
Inrego said:
Your link doesn't work.. I found a picture of what was showing when I unplugged the battery, but I'm not allowed to post links to other sites on these forums yet.
Click to expand...
Click to collapse
heres a few thread about some pulling battery on radio flash
http://android.modaco.com/content/g...m/304368/can-the-nexus-one-be-bricked/#entry0
http://android.modaco.com/content/h...50/help-cannot-turn-on-after-flash-new-radio/
i cant find anythink about fixin the issue sorry
Well thanks alot for trying. At least it seems like it shouldn't be too hard to get a replacement unit..
Inrego said:
Well thanks alot for trying. At least it seems like it shouldn't be too hard to get a replacement unit..
Click to expand...
Click to collapse
all depends on if ur on warranty if u have receipt and warranty then all is ok with out them u stuck basically
sorry couldn't help more hopefully lesson learnt playing with radio is risky business
Yea got warranty and reciept and all that, so np there
Inrego said:
Yea got warranty and reciept and all that, so np there
Click to expand...
Click to collapse
nice one then just make up a bull**** reason ok well hope u get a replacement
Wait a minute...
Inrego said:
Well thanks alot for trying. At least it seems like it shouldn't be too hard to get a replacement unit..
Click to expand...
Click to collapse
For the record to help some of you out who ended up here Googling: I had a similar issue. My HTC Desire SV did not boot, and when charging, only had an orange flashing light, and the phone vibrated 7 times. I did 2 things that got it back up:
1) left the phone off for say 10 minutes (I read about overheating issues in general, although the phone did not feel hot).
2) removed the battery for a couple of minutes.
VERY IMPORTANT: for step 2: make sure to have the battery removed long enough to drain internal charge. I removed and installed the battery in a second or so at first, and still the phone did not boot. After leaving out the battery long enough, it booted again. It appears to me that the issue in my case was a rather big internal charge capacity which kept internal state (memory and/or CPU?) from booting. Hope this helps...

please i really need some help!!!!

my friend gave me the motorola defy to try to flash it to 2.2..so i got this firmware :JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTFR_P029_A006_HWp3_Service1FF.sbf i flashed it and now the phone doesnt start anymore!!!!only the led is working!!!!what can i do???please help me otherwise i got to pay that phone to my friend!!!!
ieppa said:
my friend gave me the motorola defy to try to flash it to 2.2..so i got this firmware :JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTFR_P029_A006_HWp3_Service1FF.sbf i flashed it and now the phone doesnt start anymore!!!!only the led is working!!!!what can i do???please help me otherwise i got to pay that phone to my friend!!!!
Click to expand...
Click to collapse
The sbf you have used is an android eclair 2.1 and not a froyo 2.2.
Have a look in the sticky thread by walter79 in the dev forum as it has a list of all the sbf.
You just need an android froyo 2.2 sbf.
From my MotoDefy on Android 2.3.4 CM7.
Ye but now the phone is dead!!!what can i do?
Sent from my GT-I5800 using XDA App
Check ur battery and try Stock Recovery...
http://forum.xda-developers.com/showthread.php?t=1114772
Try all things there and hope it works.
If you cam reach either stock recovery our boot loader, there is hope for your phone
Sent from my MB525 using XDA App
the only thing that i get is the white led!!
tried to do everythings..but it doesn't work
do you remember the version which was active on your friends phone before you flashed. ??
Try to reflash that sbf again.
i cant reflash it because my phone is dead!!!
So your phone does nothing?
Did you remove the battery, hold vol up and re insert the battery while maintaing vol up?
If nothing happens maintain vol up and hold power for 5 secs..... Anything happen?
If you can't get to bootloader you have SERIOUS problems or YOUR BATTERY IS DEAD
either use an external charger or use the Mcgyver method.
ALWAYS wipe before flashing an sbf. vol down+power gets you to stock recovery so you can wipe.
first and foremost, can RSD lite detect your phone? If yes, your phone is still alive, just in coma, not dead. download a full sbf, and not some fixed sbf and flash it. it should work.
if not, you'll have to give us more information on what you have done, what are you seeing, instead of just saying it's dead. that's not gonna help us help you. it will just mean that the phone will remain as it is.
the phone is dead...rds doesnt recognize my phone!!i flashed the firmware that i posted before..after that i saw white led in the phone...and rds still could detect my phone but it was late and i thinked: i'll put oldest firmware tomorrow im tired...so the day after i went to get the phone...and it was dead!!

[HELP] Bricked, almost dead Defy+

i bought this Defy+ just a couple of days ago and i was trying to get CM7. I struggled to root it but i achieved it. I wiped and did all the procedure before installing it, but i didn't had enough space on my SD, so i rebooted and booted like a brand new defy, going through the Blur config and everything... So i went to Recovery again, but at this time i forgot to do the wiping - which, i guess, led to a brick.
So i managed to get a .sbf to flash it.. What i didn't realized is that the .sbf was a custom, so i guess this ****ed up my phone even more. And so i went on trying to rescue my phone but this time i couldn't complete the flashing process, i wasn't able to perform a downgrade - i guess. After this, i got a non-rootable .sbf and began the flashing. The process got stuck on some message at 0%, then i disconnected the phone.
When i was able to download a stock firmware, from the .sbf thread, the phone wouldn't reboot when RSD asked, it didn't turn on again. So i tried to re-flash it, same .sbf and now i'm stuck with this situation: the pc is not recognizing my phone, i have a black screen - not even the Bootloader error screen is appearing and i'm here, begging, for someone to help me. is it dead? can i get it back?
HELP, PLZ
Is there any juice in the battery left? Does the phone even turn on or did you just drain all of your battery? If so, you have a couple of options - do McGyver or find somebody with the same phone and ask him to charge your battery and then start over. I would strongly recommend you take the second option.
Auris 1.6 vvt-i said:
Is there any juice in the battery left? Does the phone even turn on or did you just drain all of your battery? If so, you have a couple of options - do McGyver or find somebody with the same phone and ask him to charge your battery and then start over. I would strongly recommend you take the second option.
Click to expand...
Click to collapse
it doesn't turn on, but i guess it does have battery, i can see the led on when i connect it to the pc
Led is always on when connected to the PC - it means nothing. If it doesn't turn on, then your battery's dead. Find someone who has the same phone and can charge it for you.
I think there is no problem, but you flash older firmware, which is probably due to the 7 bootloader does not go up.
try to be flash with one of these (2.3.6 GB)
http://forum.xda-developers.com/showthread.php?t=966537
begins with the 139-ended, if it is not going to work with the 188-ended
Sorry for bad English
"As of today there is no a full SBF** for the Defy+ (found here).
This full SBF is a new CG Version**, with Android 2.3.6. You wont be able to go back to your Stock Defy+ Rom, but at least you wont kill it if something goes wrong."
i successfully flashed it but still it won't turn on, i'm almost giving up on this one
caiowatanabe said:
i successfully flashed it but still it won't turn on, i'm almost giving up on this one
Click to expand...
Click to collapse
If it gets past the red m and just keeps playing the android animation then simply pull battery hold volume - put battery in and keep volume - held when you get the android and the triangle press volume + and - and wipe all, should boot, unfortunately you've just flashed the un root able sbf and are stuck on moto standard
teamwork makes the dream work
nevermind, i flashed other sbf version and it is now working; too bad this version isn't rootable
anyway, many many thanks for all the help
caiowatanabe said:
nevermind, i flashed other sbf version and it is now working; too bad this version isn't rootable
anyway, many many thanks for all the help
Click to expand...
Click to collapse
Feel free to keep an eye on the dev section for the bl7 rooting thread you may get lucky
teamwork makes the dream work

[Q] Boot problem with my p6

Hey guys,
I was running blueandroid custom rom on my p6 and it was all working fine. suddenly my phone shut down and since that moment i can't find a way to turn it on further then the huawei logo. pressing all three buttons for the forced update doesn't work. and i can't get in recovery. It simply doesn't make it till that point. sometimes it shows a random color (the whole screen) but most of the time it just shuts down at the huawei logo... i also tried fastboot but it doesn't get recognized...
could anyone help me?
i'd really aprecciate it.
Are you able to use adb?
If yes, try to flash twrp recovery via ADB.
Instructions in forum thread. (I think 2nd post)
Sent from my P6-U06 using xda app-developers app
Larsbehrens said:
Hey guys,
I was running blueandroid custom rom on my p6 and it was all working fine. suddenly my phone shut down and since that moment i can't find a way to turn it on further then the huawei logo. pressing all three buttons for the forced update doesn't work. and i can't get in recovery. It simply doesn't make it till that point. sometimes it shows a random color (the whole screen) but most of the time it just shuts down at the huawei logo... i also tried fastboot but it doesn't get recognized...
could anyone help me?
i'd really aprecciate it.
Click to expand...
Click to collapse
Is your p6 low on battery? If it is, charge it up before trying to get to recovery.
bokchoi2020 said:
Is your p6 low on battery? If it is, charge it up before trying to get to recovery.
Click to expand...
Click to collapse
It doesnt charge ( the led doesnt turn on and im pretty sure that doesnt) and i havent been able to try adb. Its also quite strange that it wont be in a stable recovery mode ( or fastboot mode) since it turn itself off after 10/20 seconds.
getting really lost
So guys,
i'm really starting to think i need to bring mine to the service center cus it's completely dead.
it won't charge, it doens't get into recovery mode, i can't flash the official firmware with the sdcart/dload/update.app way, i can't fastboot it cus it won't go in fastboot mode (the way it get stuck on the splash screen/huawei logo), and it shuts itself down after 20 seconds leaving nothing else then a black but brightened screen.....
i'm afraid i have to take full costs due my root and custom rom, if they can fix/see it at all.
it worked fine after all and shut down with no reason what makes me think this is a hardware problem.
does anyone else have any suggestions before i bring it to the service center?
thanks
Let it charge for 24 hours,see if you can turn it on after that.
HUAWEIAscendP6
HUAWEIAscendP6 said:
Let it charge for 24 hours,see if you can turn it on after that.
HUAWEIAscendP6
Click to expand...
Click to collapse
It has been on the charger for more than 24 hours, nothing has changed, still doesnt seem to charge.
larsbehrens1 said:
It has been on the charger for more than 24 hours, nothing has changed, still doesnt seem to charge.
Click to expand...
Click to collapse
No led?
HUAWEIAscendP6 said:
No led?
Click to expand...
Click to collapse
Nope, the only led that ive been able to see is the red one for 1/4th of a second in SOME cases when i try to boot it.
larsbehrens1 said:
Nope, the only led that ive been able to see is the red one for 1/4th of a second in SOME cases when i try to boot it.
Click to expand...
Click to collapse
But thats's ok, this is a common android problem, but some phone must be charged for al least two days, and after that try to flash another ROM. Even if the led is not always on, let it for a long time to charge, trust me, the power will be inside your battery, not full but enough to resist/handle a new ROM flashing.
HUAWEIAscendP6 said:
But thats's ok, this is a common android problem, but some phone must be charged for al least two days, and after that try to flash another ROM. Even if the led is not always on, let it for a long time to charge, trust me, the power will be inside your battery, not full but enough to resist/handle a new ROM flashing.
Click to expand...
Click to collapse
Yea i know that... But it doesnt show the led when i charge it (so the led has nothing to do with the charging state of the phone), only in some cases when i try to boot into recovery. And the battery cant actually be totally empty, it was 40% when it totally crashed so i dont think thats the problem. And if so, it should at least get to the point where it is trying to flash the original firmware
larsbehrens1 said:
Yea i know that... But it doesnt show the led when i charge it (so the led has nothing to do with the charging state of the phone), only in some cases when i try to boot into recovery. And the battery cant actually be totally empty, it was 40% when it totally crashed so i dont think thats the problem. And if so, it should at least get to the point where it is trying to flash the original firmware
Click to expand...
Click to collapse
What tool are you using for flashing? Or you try to install it from sdcard?
HUAWEIAscendP6 said:
What tool are you using for flashing? Or you try to install it from sdcard?
Click to expand...
Click to collapse
Im trying to flash it thru the sdcard with the update.app in sdcart/dload/update.app but to do that, you have to put in a certain mode (by holding vol+ and vol- and the power button) . But once again, i cant put the phone in A state, doesnt matter which state. It just wont get in a stable mode. Thats why i cant use fastboot/adb
larsbehrens1 said:
Im trying to flash it thru the sdcard with the update.app in sdcart/dload/update.app but to do that, you have to put in a certain mode (by holding vol+ and vol- and the power button) . But once again, i cant put the phone in A state, doesnt matter which state. It just wont get in a stable mode. Thats why i cant use fastboot/adb
Click to expand...
Click to collapse
That button combination if for internal storage dload folder. Put your ROM on the sdcard. Enter CWM or TWRP and flash it throu there.
HUAWEIAscendP6 said:
That button combination if for internal storage dload folder. Put your ROM on the sdcard. Enter CWM or TWRP and flash it throu there.
Click to expand...
Click to collapse
I wish i could acces CWM cus then i wouldn't have this problem at all.... but i already said that i can't get my phone in a stable state, or any state. so i can NOT acces CMW
Larsbehrens said:
I wish i could acces CWM cus then i wouldn't have this problem at all.... but i already said that i can't get my phone in a stable state, or any state. so i can NOT acces CMW
Click to expand...
Click to collapse
Let it charge to your wall outlet,not through usb cable.
HUAWEIAscendP6
HUAWEIAscendP6 said:
Let it charge to your wall outlet,not through usb cable.
HUAWEIAscendP6
Click to expand...
Click to collapse
Already doong that for the past 48 hours
Bringing it back
So guys,
Im going to the service center in 8 hours since my phone is completely DEAD. It doest charge and it does not even react to the power button anymore... (Probably cus the battery is completely drained), it doesnt react to anything else either (usb, power net, anything) and will nog be able to fix by connecting it thru a computer. Aka its hopeless...
Thanks for the support
Ive been to the service center, got a new phone directly, so everything is solved. For the information, my problem was a (like i expected) hardware problem, and there was NO way to fix without replacing hardware.
Sent from my HUAWEI P6-U06 using XDA Premium 4 mobile app
Larsbehrens said:
Ive been to the service center, got a new phone directly, so everything is solved. For the information, my problem was a (like i expected) hardware problem, and there was NO way to fix without replacing hardware.
Sent from my HUAWEI P6-U06 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Good news.

Categories

Resources