Related
Good evening everyone,
I own a Motorola Defy, and tried to put the ROM "For Adlxmod Froyo Defy, "but I had the UK firmware 2.51.1.
It was there that a lack of attention, my phone now does not care anymore.
He only gets a white LED lit in front of him and does not happen any more, nor even acknowledge again by RSD.
I read in several places that this is due to firmware 2:51 and I believe I have given a HARD BRICK on my device.
Has some way to fix my phone without having to take it to an authorized?
I thank everyone's help,
Felipe
Deleted by user
Thanks, I managed to settle with the tip given!
Hello Everyone,
My Defy run out of juce with a special 3400mAh battery from china in the night. When I came home I changed the battery (the stock battery) which was fully charged. After that the defy was stuck in a bootloop (cm7) but i did not recognize this for a couple of hours. Because of this bootloop I removed the battery and put it in again from that time on the defy was dead. Maybe I did not wait long enough - I mean I saw the bootloop and thought 'crap' took the battery out and stuffed it right in again (I was a bit frustrated). Maybe i should have waited at least 5-10 seconds before putting the battery in again?
I tried to get access to the defy by RSD lite. But the PC does not recognize it. I got a white LED by connecting it to the PC. The defy is recognized only for to seconds and than disconnects again.
I tried to flash via sbf_flash on ubuntu without any result. The defy is simply not recognized. Only white LED. No Bootloader, no recovery, no logo.
Has anyone a suggestion? Is there a possibility to get acess to the defy to reflassh everything. Since the white LED is active there has to be a way. What about JTAG and riffbox? could this be a solution and if yes - how ?
I bought a used iPhone4 last week. But honestly: I hate it!! I do not like iOS, I dont like the edges of the iPhone - it is so uncomfortable to hold it in the hands. Wifi connectivity and connection is catastrophic. I will sell it a.s.a.p. again.
I want just my beloved defy back - the only phone I ever loved !! I appreciate any suggestions - thanks in advance !!
Your "special" battery is not that special afterall
What happened to your stock battery? Just get it charged - ask a friend with a Defy to charge it for you or do the McGyver trick, in order to fire it up again and then flash your stock SBF via RSD Lite. Calm down - Defy is like a Terminator and is immortal (as long as you don't kill it by flashing wrong SBF )
Thank you for the reply. However I have a dockingstation for the defy with which I can charge the battery without the phone. The battery is full for sure!
Hope you are right that the defy is like the Terminator - I have not lost hope yet.
Any other suggestions ?!
If Defy doesn't even get into bootloader, this means there is no juice in the battery. No matter what crap one would flash, bootloader is ALWAYS accessable! That's the beauty of the locked bootloader - you can't kill it! So as long as there is charge in the battery, you can always get into bootloader (Vol up + Power) and flash a new sbf. Peace of advice: don't trust your cheap, no-name, chinese battery. Use the original one, charged in another Defy phone, so you can make sure it really IS charged. The fact you left it in an external charger, doesn't mean it is charged - battery might not be working, charger may not be working, or both at the same time might not be working. There is no reason not to get into bootloader if there is charge in the battery
Cheers!
Auris 1.6 vvt-i said:
If Defy doesn't even get into bootloader, this means there is no juice in the battery. No matter what crap one would flash, bootloader is ALWAYS accessable! That's the beauty of the locked bootloader - you can't kill it! So as long as there is charge in the battery, you can always get into bootloader (Vol up + Power) and flash a new sbf. Peace of advice: don't trust your cheap, no-name, chinese battery. Use the original one, charged in another Defy phone, so you can make sure it really IS charged. The fact you left it in an external charger, doesn't mean it is charged - battery might not be working, charger may not be working, or both at the same time might not be working. There is no reason not to get into bootloader if there is charge in the battery
Cheers!
Click to expand...
Click to collapse
Spot on
Sent from my MB525 using xda premium
my defy have a hard brick too.. I had to flash via SBF, but it occurs when the input loop gmail account, each starting up the account, there was a restart .. and now the Defy could not turn on .. whether the factors that depleted battery??
Auris 1.6 vvt-i said:
If Defy doesn't even get into bootloader, this means there is no juice in the battery. No matter what crap one would flash, bootloader is ALWAYS accessable! That's the beauty of the locked bootloader - you can't kill it! So as long as there is charge in the battery, you can always get into bootloader (Vol up + Power) and flash a new sbf. Peace of advice: don't trust your cheap, no-name, chinese battery. Use the original one, charged in another Defy phone, so you can make sure it really IS charged. The fact you left it in an external charger, doesn't mean it is charged - battery might not be working, charger may not be working, or both at the same time might not be working. There is no reason not to get into bootloader if there is charge in the battery
Cheers!
Click to expand...
Click to collapse
My Defy+ don't enter on bootloader anymore, just white light and RSD Lite is working. Had you saw this behavior before?
duduzerah said:
My Defy+ don't enter on bootloader anymore, just white light and RSD Lite is working. Had you saw this behavior before?
Click to expand...
Click to collapse
It's blank screen problem, happens when you flashed an SBF older than your previous one.
You still can get into Bootloader, just nothing on screen but it's definitely in there. Then flash the right SBF, the same or higher build than your previous stock rom successfuly to fix it.
Which SBF are higher than other? It's about Bootloader(BL) version, read here. http://forum.xda-developers.com/showthread.php?t=966537
If not sure, try DFP-231 builds, it's highest BL version to ensure fixing this.
intemptesta said:
It's blank screen problem, happens when you flashed an SBF older than your previous one.
You still can get into Bootloader, just nothing on screen but it's definitely in there. Then flash the right SBF, the same or higher build than your previous stock rom successfuly to fix it.
Which SBF are higher than other? It's about Bootloader(BL) version, read here. http://forum.xda-developers.com/showthread.php?t=966537
If not sure, try DFP-231 builds, it's highest BL version to ensure fixing this.
Click to expand...
Click to collapse
I have the same problem as last post (blank screen) with my DEFY (not plus). I flashed DFP-231 but now the boot stops at M logo. I`ve tried power+volume down but cannot access stock recovery. Any suggestions?
Jeff
jhys06567 said:
I have the same problem as last post (blank screen) with my DEFY (not plus). I flashed DFP-231 but now the boot stops at M logo. I`ve tried power+volume down but cannot access stock recovery. Any suggestions?
Jeff
Click to expand...
Click to collapse
Look, I've suggested to one who use Defy+, so I said he should try DFP-231.
But not for Defy mb525, you shouldn't flash DFP-231 or any 2.3.x SBF files to your mb525...
Now you've stuck to Bootloader V.7 and no way back.
What's done is done, stick to that DFP-231 SBF you've flashed for now.
Did your flash finish with "Finish/pass" or "Please manually power up phone"?
If it Finish/pass then try again on Stock recovery, you almost there.
But if "Please manually power up phone", means you're not yet flashed your phone completely...
So do this, http://forum.xda-developers.com/showthread.php?p=38187413
Hi.
After I successfully installed the cyangen mod, i wanted to install swype and some google apps. that is when i flashed the nightly sbf...
Since then, I could not start my phone..., only the bootloader (no matter which volume key i pressed).
So I looked for a full sbf to flash and found one, with code 2.5... (jrdnem u3 2.51.1)
but now, I can not even enter the bootloader. the only surviving signal of my phone i get is the white led when i connect it to the pc...
the battery status was at. about 85 %...
I'm really sorry, but i would be very greatful to receive some help
ps. before i flashed the nightly sbf, i forgot to wipe this thing in the bootloader...
Well...in my desperate state I was not able to type in the right words into the search bar. I think I found the answer to my Problem... My only task now is to find a well working sbf 2.5...
I'm still confused. I thought I'm not, but- would it be a problem if i flash the nordic cynagenmod, sbf version 3.4.2?
I would not knwo why not, but after I have these problems, I dont want to do anything again without knowing the consequence...
If you could enter stock recovery. You can do full wipe and boot to bootloader to flash your previous working sbf. If only bootloader your get now, just flash the nordic sbf and boot it into stock recovery to perform the full wipe.
Sent from my awesome Moto Defy: Stock Rooted Gingerbread 2.3.3 - XDA Premium
Right now, I don't even see the Bootloader or any Motorola-Logo. It just nothing happening, when I press the power button.
Your battery may well have run out of juice (same happened to me once upon a time). Leave it off, stick it on charge. Go have a cup of tea or two, then try again.
Alright. Now I'v had the time to check again.
Even with charging, the phone is still not turning on.
But I've read somewhere :" Don't worry, as long as you "see" your device in RSD Lite you can still flash the firmware. My big question is: WHICH SBF will help me? I#m really afraid to flash anything, because I don't now the consequence...
About the Cyangenmod: It said, it is not downgradable... does this mean, that I must take the JRDNEM_U3_2.51.1 sbf?
Hope this tips shade some light in your quest of resurrection of your dying Defy.
1) Use RSDlite 4.9 or 5.0 as these program known to be stable on PC.
2) Use the latest Moto driver 5.0.0 ver. Google it and you find it easily.
3) Install both the above 1) and 2).
4) Take out your Defy's battery, plug in USB cable on both ends
5) launch the RSDlite and insert the battery. You'll get some drivers installing and have the connected status display on the RSDlite window.
6) Flash the phone to this file HERE.
7) After flashed completed (At this point you won't get a normal boot yet, screen still black or stuck in moto logo), reboot into stock recovery and do full wipe.
8) Reboot again and you should be seeing it alive again.
Note: If somehow your battery run flat. You must do the Mcguyver trick to flash your phone. Do it quickly to avoid your battery get fried and damaged. I would suggest you brigde the wire connection to a 100Kohm resistor to bring down the voltage/current, this will protect your battery from getting fried.
Wish best of luck this time around.
Wow. Thank you very much for this step-to step guide.
Now, before I get started I have one question left: Can I also use the 5.1 Moto Driver? Or should I downgrade it?
I have the RSDLite 5.0 now, (before it was the 5.33 or so).
Those drivers should work too..
Sent from my awesome Moto Defy: Stock Rooted Gingerbread 2.3.3 - XDA Premium
I tried what u said, it's just that RSD does not recognize my phone, so I cannot even flash. I want to believe this is because the battery has run flat (which I don't understand, it still had about 70 % 2 days ago, when the whole story started...)
Please tell me that this is just the symptom of a low battery?!
Is it possible that the flashing has wiped out all firmware and bootloader and chargin system availeble on the phone?
My defy has the same problem. I have changed battery and a universal charger but i dont to know as resolve
I used the Mac Giver trick to flash the sbf onto my defy. It worked, my Defy is working again. Thank you very much
Hello Mates,
tried to flash my friends defy yesterday(JOREM_U3_3.4.2_177-003 ). RSD said something like code(area) 32: Md5sum wrong(?) and now, when i switch the phone on, it says:
Bootloader 9.10
Code Corrupt
Ready to Program
connect USB
tried to flash different SBF´s without success. Meanwhile it says Battery low, unable to program...
Plugged in the AC, but it doesn´t load at all. when i plug the USB RSDLite (4.9) doesn´t recognize the Defy and also doesn´t load it...
I´m no beginner and flash smartphones since the p3700 without issues (except one bricked Touch HD, but was a HW-fault). Don´t know what i did wrong.
Hope so much that you can help me out , because she will kill me, if she doesn´t get her beloved DEFY back...
Greetings, Tom
Reinstall rsdlite of higher version and drivers might help. But you got to charge the phone first.
Sent from my awesome Moto Defy: Stock Rooted Gingerbread 2.3.3 - XDA Premium
You should also re-download the SBF as it might be corrupted as well.
hmm...redownloaded the sbf.gz and updated to rsd 5.31 and new drivers on a clean system-same result... anything else icould do?
the Error is at ALL groups(31-47?) I think i lost warranty from now on...
thx in advance, tom
Edit: i have to unpack the .gz-files--is this right? I fell like a NOOB :-(
I would try a completely different sbf. Also plugging in the phone will not charge it unless you have a functioning ROM installed. If you still haven't got it charged use the Mcgyver method to charge it. Also you will want to wipe data/cache from stock recovery before flashing a new sbf (if you can even get into stock recovery now that you failed to properly flash sbf. If not then you will want to flash sbf to re-gain stock recovery access and then wipe data/cache or else you will have nothing but FC's when ROM finally boots)
and YES you must unpack .gz file.
if you keep flashing new and different sbf's and keep getting md5 mismatch on CG verification then your hardware is not properly flashing and you have a hardware issue! hopefully that is not the case. ONLY download sbf from XDA or and-developers
Hmmm... All the sbf´s were from and-developers... charging is not the problem, my girlfriend has a working defy, so i charge the battery there.
When i switch it on with volume down and power, the screen keeps black(backlight switches on) until i release the button(s). After releasing them i am automatically back in Bootloader(you know: code corrupt, etc...)
I also did not find the original sbf (2.1-update one, branden with 3 Austria)
she just wanted me to flash it, because the phone resetted itsels partly(motoblur, google-account) at every restart, it also had lot of FCs and lags. The Defy of my GF has the same branded FW and no problems. Perhaps it is really a HW issue?? I hope not! Any tips, where i could find the original 3 Austria FW??
Thank you all!
EDIT: What do you use to unpack the .gz-files? I tried 7zip and WinRAR.
It doesn't matter which one of those two apps you are using to extract the SBF from the archive. An alternate source for the SBF you've mentioned might be found on this thread. If you don't manage to revive it with that SBF then you might give it a try with the nordic one.
PS: hope you are using the original Moto USB cable.
nepotu said:
might give it a try with the nordic one.
PS: hope you are using the original Moto USB cable.
Click to expand...
Click to collapse
The last sbf i tried was the nordic one(from 2 different sources)...
I used the csble from my old nexus one... it´s plugged on the pc since i had thus device... i will give the original moto a try, but are there any differences??
greetings, tom
Noticed at work that Defy keeps disconnecting if I use a cheap USB cable, while with Motorola one everything is fine (it also works fine with a Nokia USB).
Mine is doing the same.. any fix?
I have experienced the same exact problem. My Defy was having an issue where it would reset all passwords, clear all user data (including Blur) and require a complete new setup, every time I pulled the battery or turned the phone off then on. It was so annoying. It also wouldn't take the 2.2.1 update OAT, so I decided to re-flash. I am now with a bricked phone that gives the same "Code is currupt" message and no known fix. Arhhh!
I have the same problem too.What should I do?
Try to give it to motorola for warranty and tell them that u were upgrading over the air and this happened
Sent from my MB526 using XDA App
i bought this Defy+ just a couple of days ago and i was trying to get CM7. I struggled to root it but i achieved it. I wiped and did all the procedure before installing it, but i didn't had enough space on my SD, so i rebooted and booted like a brand new defy, going through the Blur config and everything... So i went to Recovery again, but at this time i forgot to do the wiping - which, i guess, led to a brick.
So i managed to get a .sbf to flash it.. What i didn't realized is that the .sbf was a custom, so i guess this ****ed up my phone even more. And so i went on trying to rescue my phone but this time i couldn't complete the flashing process, i wasn't able to perform a downgrade - i guess. After this, i got a non-rootable .sbf and began the flashing. The process got stuck on some message at 0%, then i disconnected the phone.
When i was able to download a stock firmware, from the .sbf thread, the phone wouldn't reboot when RSD asked, it didn't turn on again. So i tried to re-flash it, same .sbf and now i'm stuck with this situation: the pc is not recognizing my phone, i have a black screen - not even the Bootloader error screen is appearing and i'm here, begging, for someone to help me. is it dead? can i get it back?
HELP, PLZ
Is there any juice in the battery left? Does the phone even turn on or did you just drain all of your battery? If so, you have a couple of options - do McGyver or find somebody with the same phone and ask him to charge your battery and then start over. I would strongly recommend you take the second option.
Auris 1.6 vvt-i said:
Is there any juice in the battery left? Does the phone even turn on or did you just drain all of your battery? If so, you have a couple of options - do McGyver or find somebody with the same phone and ask him to charge your battery and then start over. I would strongly recommend you take the second option.
Click to expand...
Click to collapse
it doesn't turn on, but i guess it does have battery, i can see the led on when i connect it to the pc
Led is always on when connected to the PC - it means nothing. If it doesn't turn on, then your battery's dead. Find someone who has the same phone and can charge it for you.
I think there is no problem, but you flash older firmware, which is probably due to the 7 bootloader does not go up.
try to be flash with one of these (2.3.6 GB)
http://forum.xda-developers.com/showthread.php?t=966537
begins with the 139-ended, if it is not going to work with the 188-ended
Sorry for bad English
"As of today there is no a full SBF** for the Defy+ (found here).
This full SBF is a new CG Version**, with Android 2.3.6. You wont be able to go back to your Stock Defy+ Rom, but at least you wont kill it if something goes wrong."
i successfully flashed it but still it won't turn on, i'm almost giving up on this one
caiowatanabe said:
i successfully flashed it but still it won't turn on, i'm almost giving up on this one
Click to expand...
Click to collapse
If it gets past the red m and just keeps playing the android animation then simply pull battery hold volume - put battery in and keep volume - held when you get the android and the triangle press volume + and - and wipe all, should boot, unfortunately you've just flashed the un root able sbf and are stuck on moto standard
teamwork makes the dream work
nevermind, i flashed other sbf version and it is now working; too bad this version isn't rootable
anyway, many many thanks for all the help
caiowatanabe said:
nevermind, i flashed other sbf version and it is now working; too bad this version isn't rootable
anyway, many many thanks for all the help
Click to expand...
Click to collapse
Feel free to keep an eye on the dev section for the bl7 rooting thread you may get lucky
teamwork makes the dream work
I was changing my android version from 2.2.2 to ICS, and everything was fine until my battery died, i thought that it was a software problem and i did changed my system again using RSD Lite and i did bought a new battery.
Then when i turn ON my phone now is stuck in the bootloader screen, i did tried using with this SBF list:
http://sbf.droid-developers.org/umts_jordan/list.php
But nothing happens.
I dont know what to do....
What i am doing wrong?
Sorry for my bad english...
Otherwise the blue light on every startup doenst turn ON so i cant get the boot menu...
mafiurs said:
I was changing my android version from 2.2.2 to ICS, and everything was fine until my battery died, i thought that it was a software problem and i did changed my system again using RSD Lite and i did bought a new battery.
Then when i turn ON my phone now is stuck in the bootloader screen, i did tried using with this SBF list:
http://sbf.droid-developers.org/umts_jordan/list.php
But nothing happens.
I dont know what to do....
What i am doing wrong?
Sorry for my bad english...
Otherwise the blue light on every startup doenst turn ON so i cant get the boot menu...
Click to expand...
Click to collapse
Did the battery die in between the process.?
What SBF you flashed from the link.? Was it your stock SBF or some other.?
problem...
neo.ank said:
Did the battery die in between the process.?
What SBF you flashed from the link.? Was it your stock SBF or some other.?
Click to expand...
Click to collapse
The battery didnt die during the process, it just die an afternoon...
When i replace the battery it works fine for a while, until i used the RSD lite to change the Android version...
I cant remember exactly which SBF file i did used from the list, i think that could be the Claro Latin America´s file.
problem...
neo.ank said:
Did the battery die in between the process.?
What SBF you flashed from the link.? Was it your stock SBF or some other.?
Click to expand...
Click to collapse
Actually i can change the android version using the RSD lite system...
But none work :S
It is just stuck in the bootloader screen
does the battery charge when turned off?
problem...
i dont know if this is being charged when is turned off, but the battery works fine, it is on during all the process with the RSD lite...
try to boot into boatloader modus ,
If it says battery low cannot program you know what's wrong
If your battery don't charge use McGiver trick ,other battery or else
If it don't boot after flash with rsd
Factory reset from stock recovery would solve your problem
Sent from my MB526 using xda app-developers app
mafiurs said:
Actually i can change the android version using the RSD lite system...
But none work :S
It is just stuck in the bootloader screen
Click to expand...
Click to collapse
The problem might be the SBF you flashed.
Just try to get the details about the SBF you flashed.. At least the CG version.
problem
bone101 said:
try to boot into boatloader modus ,
If it says battery low cannot program you know what's wrong
If your battery don't charge use McGiver trick ,other battery or else
If it don't boot after flash with rsd
Factory reset from stock recovery would solve your problem
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
The Battery is fine and i cant get the Stock recovery mode...
Just appear an android logo with a " ! " symbol...
problem...
neo.ank said:
The problem might be the SBF you flashed.
Just try to get the details about the SBF you flashed.. At least the CG version.
Click to expand...
Click to collapse
I did flashed my defy with this sbf version:
DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf
problem...
The sbf that i flashed was this one:
DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf
you have flashed the worst sbf you could have. i am afraid to say that the phone is now in dire straights.
the battery fixes dont work for that bootloader on normal defy red lense phones. the only chance you may have is to read through my thread but ultimately it may not help so please do your own research before you come knocking down my door.
http://forum.xda-developers.com/showthread.php?t=1836958&page=2
i havent fixed the issue but i am able to use the phone but only if the battery is pre charged. no matter what i did or what battery fix i flashed i can not get the phone to either tell me how much charge is left or get it to charge the battery and sometimes i need he mcgyver trick to even get the phone boot.
basically i still havent properly tested it but i have an external battery pack on its way and will be able to confirm one way or the other tomorrow. if it goes as i hope then i will be able to charge the battery sing an external pack put the battery in the phone and use it until it runs dry. then i can charge the battery again using the battery pack and so on and so forth.
i am using white rabbit rom which has a cm7.2 base and is really very good. it also has four battery fixes you can download and there are a few more found dotted here there and everywhere on xda. you will have to search for them. all told i tried 6 and none have fixed the issue however you may have better luck than i did.
i have been told it is fixable but i didnt find one and have given up now. if the battery pack doesnt work then i am just gonna throw it in the drawer and buy another phone.
sorry to be the bearer of bad news.
mafiurs said:
The sbf that i flashed was this one:
DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf
Click to expand...
Click to collapse
Seriously.!! Why you didn't read before doing anything. Full SBFs kills the option to revert back.
Now flash that SBF again, see if you can boot into recovery and wipe data/factory reset.
rockmonkey1973 said:
you have flashed the worst sbf you could have. i am afraid to say that the phone is now in dire straights.
the battery fixes dont work for that bootloader on normal defy red lense phones. the only chance you may have is to read through my thread but ultimately it may not help so please do your own research before you come knocking down my door.
http://forum.xda-developers.com/showthread.php?t=1836958&page=2
i havent fixed the issue but i am able to use the phone but only if the battery is pre charged. no matter what i did or what battery fix i flashed i can not get the phone to either tell me how much charge is left or get it to charge the battery and sometimes i need he mcgyver trick to even get the phone boot.
basically i still havent properly tested it but i have an external battery pack on its way and will be able to confirm one way or the other tomorrow. if it goes as i hope then i will be able to charge the battery sing an external pack put the battery in the phone and use it until it runs dry. then i can charge the battery again using the battery pack and so on and so forth.
i am using white rabbit rom which has a cm7.2 base and is really very good. it also has four battery fixes you can download and there are a few more found dotted here there and everywhere on xda. you will have to search for them. all told i tried 6 and none have fixed the issue however you may have better luck than i did.
i have been told it is fixable but i didnt find one and have given up now. if the battery pack doesnt work then i am just gonna throw it in the drawer and buy another phone.
sorry to be the bearer of bad news.
Click to expand...
Click to collapse
You are not understanding, my battery is fine so i can turn on my phone without using the Mcgyver trick...
My defy is just stuck on the ( M ) screen, i read already others threads and they call it bricked, so my phone is bricked and i have to unbrick it.
mafiurs said:
You are not understanding, my battery is fine so i can turn on my phone without using the Mcgyver trick...
My defy is just stuck on the ( M ) screen, i read already others threads and they call it bricked, so my phone is bricked and i have to unbrick it.
Click to expand...
Click to collapse
Go into bootloader by pressing Power button and Vol+ button
Connect your phone to your PC via USB cable
Make sure everything is OK
Locate downloaded SBF. In popup dialog press Uncompress and start flashing
If you get " Please manually power up this phone " in RSD Lite pull battery out > put your battery back > reboot into stock recovery by holding Power button and Vol- button > Choose Wipe data/cache > Choose Reboot system now
That's it, you unbricked your Defy!
mafiurs said:
You are not understanding, my battery is fine so i can turn on my phone without using the Mcgyver trick...
My defy is just stuck on the ( M ) screen, i read already others threads and they call it bricked, so my phone is bricked and i have to unbrick it.
Click to expand...
Click to collapse
actually i did understand totally what you said and if you had read the thread i linked to you would have found the answer in there but no big deal because neo.ank has spelled it out for. do that and the phone will boot again.
the problem comes after you have got the phone flashed and running again and i guess in that respect you didnt understand what i wrote.
if when you get the sbf up and running can you please post back on this thread and let us know if the battery charges and is registered as being used... ie the percentage drops down after 2 hours of use from say 100 to 90 or whatever.
i am very keen to hear if your battery will work when you have the sbf flashed and running though so please do post back and confirm one way or the other. cheers and good luck.
THANKS!!!!
neo.ank said:
Go into bootloader by pressing Power button and Vol+ button
Connect your phone to your PC via USB cable
Make sure everything is OK
Locate downloaded SBF. In popup dialog press Uncompress and start flashing
If you get " Please manually power up this phone " in RSD Lite pull battery out > put your battery back > reboot into stock recovery by holding Power button and Vol- button > Choose Wipe data/cache > Choose Reboot system now
That's it, you unbricked your Defy!
Click to expand...
Click to collapse
Thanks a lot my Defy is back to life, the battery works fine and it gets charged at 100% without problems.
Now i just have to change the android version, i dont like that my computer sees a MB526 instead MB525.
mafiurs said:
Thanks a lot my Defy is back to life, the battery works fine and it gets charged at 100% without problems.
Now i just have to change the android version, i dont like that my computer sees a MB526 instead MB525.
Click to expand...
Click to collapse
hmm thanks for replying.
are you running the stock sbf? if you try a custom rom can you let me know if the battery works and which rom you are running. did you flash a battery fix or did it work straight away with no issues?
anyways glad to hear it is all ok and if anything changes if you flash a custom rom let us know.
mafiurs said:
Thanks a lot my Defy is back to life, the battery works fine and it gets charged at 100% without problems.
Now i just have to change the android version, i dont like that my computer sees a MB526 instead MB525.
Click to expand...
Click to collapse
Don't try to do anything about it. It won't change.. It will remain MB526.. That's why it is said to be non-downgradable.
rockmonkey1973 said:
hmm thanks for replying.
are you running the stock sbf? if you try a custom rom can you let me know if the battery works and which rom you are running. did you flash a battery fix or did it work straight away with no issues?
anyways glad to hear it is all ok and if anything changes if you flash a custom rom let us know.
Click to expand...
Click to collapse
Ok i will but for now i like the sbf´s rom and the battery is fine it get charged at 100%...